thermal: Remove core header inclusion from drivers

As the name states "thermal_core.h" is the header file for the core
components of the thermal framework.

Too many drivers are including it. Hopefully the recent cleanups
helped to self encapsulate the code a bit more and prevented the
drivers to need this header.

Remove this inclusion in every place where it is possible.

Some other drivers did a confusion with the core header and the one
exported in linux/thermal.h. They include the former instead of the
latter. The changes also fix this.

The tegra/soctherm driver still remains as it uses an internal
function which need to be replaced.

The Intel HFI driver uses the netlink internal framework core and
should be changed to prevent to deal with the internals.

No functional changes intended.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # armada_thermal.c
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> # uniphier_thermal.c
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> # rcar_gen3_thermal.c
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # amlogic_thermal.c
Acked-by: Florian Fainelli <f.fainelli@gmail.com> # bcm2835_thermal.c
Acked-by: Thierry Reding <treding@nvidia.com> # tegra30-tsensor.c
Link: https://lore.kernel.org/r/20230206153432.1017282-1-daniel.lezcano@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit is contained in:
Daniel Lezcano 2023-02-06 16:34:29 +01:00 committed by Rafael J. Wysocki
parent ef1ab1657f
commit 9272d2d43b
14 changed files with 4 additions and 18 deletions

View File

@ -28,7 +28,6 @@
#include <linux/regmap.h>
#include <linux/thermal.h>
#include "thermal_core.h"
#include "thermal_hwmon.h"
#define TSENSOR_CFG_REG1 0x4

View File

@ -19,8 +19,6 @@
#include <linux/regmap.h>
#include <linux/interrupt.h>
#include "thermal_core.h"
/* Thermal Manager Control and Status Register */
#define PMU_TDC0_SW_RST_MASK (0x1 << 1)
#define PMU_TM_DISABLE_OFFS 0

View File

@ -18,7 +18,6 @@
#include <linux/platform_device.h>
#include <linux/thermal.h>
#include "../thermal_core.h"
#include "../thermal_hwmon.h"
#define BCM2835_TS_TSENSCTL 0x00

View File

@ -16,8 +16,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/of_device.h>
#include "thermal_core.h"
#include <linux/thermal.h>
#define HI6220_TEMP0_LAG (0x0)
#define HI6220_TEMP0_TH (0x4)

View File

@ -17,7 +17,6 @@
#include <linux/slab.h>
#include <linux/thermal.h>
#include "thermal_core.h"
#include "thermal_hwmon.h"
#define TER 0x0 /* TMU enable */

View File

@ -13,7 +13,6 @@
#include <linux/slab.h>
#include <linux/thermal.h>
#include "thermal_core.h"
#include "thermal_hwmon.h"
#define IMX_SC_MISC_FUNC_GET_TEMP 13

View File

@ -40,10 +40,11 @@
#include <asm/msr.h>
#include "../thermal_core.h"
#include "intel_hfi.h"
#include "thermal_interrupt.h"
#include "../thermal_netlink.h"
/* Hardware Feedback Interface MSR configuration bits */
#define HW_FEEDBACK_PTR_VALID_BIT BIT(0)
#define HW_FEEDBACK_CONFIG_HFI_ENABLE_BIT BIT(0)

View File

@ -15,7 +15,6 @@
#include <linux/regmap.h>
#include <linux/thermal.h>
#include "../thermal_core.h"
#include "../thermal_hwmon.h"
#define QPNP_TM_REG_DIG_MAJOR 0x01

View File

@ -13,7 +13,6 @@
#include <linux/thermal.h>
#include <linux/units.h>
#include "thermal_core.h"
#include "thermal_hwmon.h"
#define SITES_MAX 16

View File

@ -17,7 +17,6 @@
#include <linux/sys_soc.h>
#include <linux/thermal.h>
#include "thermal_core.h"
#include "thermal_hwmon.h"
/* Register offsets */

View File

@ -20,11 +20,10 @@
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/thermal.h>
#include <dt-bindings/thermal/thermal_exynos.h>
#include "../thermal_core.h"
/* Exynos generic registers */
#define EXYNOS_TMU_REG_TRIMINFO 0x0
#define EXYNOS_TMU_REG_CONTROL 0x20

View File

@ -19,7 +19,6 @@
#include <linux/platform_device.h>
#include <linux/thermal.h>
#include "../thermal_core.h"
#include "../thermal_hwmon.h"
/* DTS register offsets */

View File

@ -28,7 +28,6 @@
#include <soc/tegra/fuse.h>
#include "../thermal_core.h"
#include "../thermal_hwmon.h"
#define TSENSOR_SENSOR0_CONFIG0 0x0

View File

@ -17,8 +17,6 @@
#include <linux/regmap.h>
#include <linux/thermal.h>
#include "thermal_core.h"
/*
* block registers
* addresses are the offset from .block_base