media: ccs-pll: Document the structs in the header as well as the function

The CCS pll is used by the CCS driver at the moment, but documenting the
interface makes sense. It's non-trivial and the calculator could be used
elsewhere.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

drivers/media/i2c/ccs-pll.h

@@ -20,6 +20,16 @@
 #define CCS_PLL_FLAG_OP_PIX_CLOCK_PER_LANE			(1 << 0)
 #define CCS_PLL_FLAG_NO_OP_CLOCKS				(1 << 1)
 
+/**
+ * struct ccs_pll_branch_fr - CCS PLL configuration (front)
+ *
+ * A single branch front-end of the CCS PLL tree.
+ *
+ * @pre_pll_clk_div: Pre-PLL clock divisor
+ * @pll_multiplier: PLL multiplier
+ * @pll_ip_clk_freq_hz: PLL input clock frequency
+ * @pll_op_clk_freq_hz: PLL output clock frequency
+ */
 struct ccs_pll_branch_fr {
 	uint16_t pre_pll_clk_div;
 	uint16_t pll_multiplier;
@@ -27,6 +37,16 @@ struct ccs_pll_branch_fr {
 	uint32_t pll_op_clk_freq_hz;
 };
 
+/**
+ * struct ccs_pll_branch_bk - CCS PLL configuration (back)
+ *
+ * A single branch back-end of the CCS PLL tree.
+ *
+ * @sys_clk_div: System clock divider
+ * @pix_clk_div: Pixel clock divider
+ * @sys_clk_freq_hz: System clock frequency
+ * @pix_clk_freq_hz: Pixel clock frequency
+ */
 struct ccs_pll_branch_bk {
 	uint16_t sys_clk_div;
 	uint16_t pix_clk_div;
@@ -34,6 +54,30 @@ struct ccs_pll_branch_bk {
 	uint32_t pix_clk_freq_hz;
 };
 
+/**
+ * struct ccs_pll - Full CCS PLL configuration
+ *
+ * All information required to calculate CCS PLL configuration.
+ *
+ * @bus_type: Type of the data bus, CCS_PLL_BUS_TYPE_* (input)
+ * @csi2: CSI-2 related parameters
+ * @csi2.lanes: The number of the CSI-2 data lanes (input)
+ * @binning_vertical: Vertical binning factor (input)
+ * @binning_horizontal: Horizontal binning factor (input)
+ * @scale_m: Downscaling factor, M component, [16, max] (input)
+ * @scale_n: Downscaling factor, N component, typically 16 (input)
+ * @bits_per_pixel: Bits per pixel on the output data bus (input)
+ * @flags: CCS_PLL_FLAG_* (input)
+ * @link_freq: Chosen link frequency (input)
+ * @ext_clk_freq_hz: External clock frequency, i.e. the sensor's input clock
+ *		     (input)
+ * @vt_fr: Video timing front-end configuration (output)
+ * @vt_bk: Video timing back-end configuration (output)
+ * @op_bk: Operational timing back-end configuration (output)
+ * @pixel_rate_csi: Pixel rate on the output data bus (output)
+ * @pixel_rate_pixel_array: Nominal pixel rate in the sensor's pixel array
+ *			    (output)
+ */
 struct ccs_pll {
 	/* input values */
 	uint8_t bus_type;
@@ -58,6 +102,18 @@ struct ccs_pll {
 	uint32_t pixel_rate_pixel_array;
 };
 
+/**
+ * struct ccs_pll_branch_limits_fr - CCS PLL front-end limits
+ *
+ * @min_pre_pll_clk_div: Minimum pre-PLL clock divider
+ * @max_pre_pll_clk_div: Maximum pre-PLL clock divider
+ * @min_pll_ip_clk_freq_hz: Minimum PLL input clock frequency
+ * @max_pll_ip_clk_freq_hz: Maximum PLL input clock frequency
+ * @min_pll_multiplier: Minimum PLL multiplier
+ * @max_pll_multiplier: Maximum PLL multiplier
+ * @min_pll_op_clk_freq_hz: Minimum PLL output clock frequency
+ * @max_pll_op_clk_freq_hz: Maximum PLL output clock frequency
+ */
 struct ccs_pll_branch_limits_fr {
 	uint16_t min_pre_pll_clk_div;
 	uint16_t max_pre_pll_clk_div;
@@ -69,6 +125,18 @@ struct ccs_pll_branch_limits_fr {
 	uint32_t max_pll_op_clk_freq_hz;
 };
 
+/**
+ * struct ccs_pll_branch_limits_bk - CCS PLL back-end limits
+ *
+ * @min_sys_clk_div: Minimum system clock divider
+ * @max_sys_clk_div: Maximum system clock divider
+ * @min_sys_clk_freq_hz: Minimum system clock frequency
+ * @max_sys_clk_freq_hz: Maximum system clock frequency
+ * @min_pix_clk_div: Minimum pixel clock divider
+ * @max_pix_clk_div: Maximum pixel clock divider
+ * @min_pix_clk_freq_hz: Minimum pixel clock frequency
+ * @max_pix_clk_freq_hz: Maximum pixel clock frequency
+ */
 struct ccs_pll_branch_limits_bk {
 	uint16_t min_sys_clk_div;
 	uint16_t max_sys_clk_div;
@@ -80,6 +148,17 @@ struct ccs_pll_branch_limits_bk {
 	uint32_t max_pix_clk_freq_hz;
 };
 
+/**
+ * struct ccs_pll_limits - CCS PLL limits
+ *
+ * @min_ext_clk_freq_hz: Minimum external clock frequency
+ * @max_ext_clk_freq_hz: Maximum external clock frequency
+ * @vt_fr: Video timing front-end limits
+ * @vt_bk: Video timing back-end limits
+ * @op_bk: Operational timing back-end limits
+ * @min_line_length_pck_bin: Minimum line length in pixels, with binning
+ * @min_line_length_pck: Minimum line length in pixels without binning
+ */
 struct ccs_pll_limits {
 	/* Strict PLL limits */
 	uint32_t min_ext_clk_freq_hz;
@@ -96,6 +175,16 @@ struct ccs_pll_limits {
 
 struct device;
 
+/**
+ * ccs_pll_calculate - Calculate CCS PLL configuration based on input parameters
+ *
+ * @dev: Device pointer, used for printing messages
+ * @limits: Limits specific to the sensor
+ * @pll: Given PLL configuration
+ *
+ * Calculate the CCS PLL configuration based on the limits as well as given
+ * device specific, system specific or user configured input data.
+ */
 int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *limits,
 		      struct ccs_pll *pll);