ARM: dts: rockchip: add rk3288-popmetal iodomains

Add the iodomains node and reference the correct regulator for each
domain. This also includes adding the currently unused dvp regulators
and fixing up two regulators to follow the naming in the schematics.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Heiko Stuebner 2015-09-30 21:00:16 +02:00
parent fa1c193261
commit 90f9a541d8

View File

@ -79,6 +79,22 @@
};
};
io_domains: io-domains {
compatible = "rockchip,rk3288-io-voltage-domain";
rockchip,grf = <&grf>;
audio-supply = <&vcca_33>;
bb-supply = <&vcc_io>;
dvp-supply = <&vcc18_dvp>;
flash0-supply = <&vcc_flash>;
flash1-supply = <&vcc_lan>;
gpio30-supply = <&vcc_io>;
gpio1830-supply = <&vcc_io>;
lcdc-supply = <&vcc_io>;
sdcard-supply = <&vccio_sd>;
wifi-supply = <&vccio_wl>;
};
ir: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
@ -114,6 +130,31 @@
regulator-always-on;
regulator-boot-on;
};
/*
* A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled
* by the dvp_pwr pin.
*/
vcc18_dvp: vcc18-dvp-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc18-dvp";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc28_dvp>;
};
vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
vin-supply = <&vcc_io>;
};
};
&cpu0 {
@ -321,22 +362,22 @@
};
};
vcca_codec: LDO_REG8 {
vcca_33: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcca_codec";
regulator-name = "vcca_33";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_wl: SWITCH_REG1 {
vccio_wl: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_wl";
regulator-name = "vccio_wl";
regulator-state-mem {
regulator-on-in-suspend;
};
@ -412,6 +453,12 @@
};
};
dvp {
dvp_pwr: dvp-pwr {
rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
ir {
ir_int: ir-int {
rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;