media: imx.rst: Fix formatting errors

Fix a few formatting errors.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
Steve Longerbeam 2018-02-16 20:54:34 -05:00 committed by Mauro Carvalho Chehab
parent 2b75d1ec9a
commit 8df1d2ac9c

View File

@ -213,9 +213,11 @@ To give an example of crop and /2 downscale, this will crop a
1280x960 input frame to 640x480, and then /2 downscale in both
dimensions to 320x240 (assumes ipu1_csi0 is linked to ipu1_csi0_mux):
media-ctl -V "'ipu1_csi0_mux':2[fmt:UYVY2X8/1280x960]"
media-ctl -V "'ipu1_csi0':0[crop:(0,0)/640x480]"
media-ctl -V "'ipu1_csi0':0[compose:(0,0)/320x240]"
.. code-block:: none
media-ctl -V "'ipu1_csi0_mux':2[fmt:UYVY2X8/1280x960]"
media-ctl -V "'ipu1_csi0':0[crop:(0,0)/640x480]"
media-ctl -V "'ipu1_csi0':0[compose:(0,0)/320x240]"
Frame Skipping in ipuX_csiY
---------------------------
@ -229,8 +231,10 @@ at the source pad.
The following example reduces an assumed incoming 60 Hz frame
rate by half at the IDMAC output source pad:
media-ctl -V "'ipu1_csi0':0[fmt:UYVY2X8/640x480@1/60]"
media-ctl -V "'ipu1_csi0':2[fmt:UYVY2X8/640x480@1/30]"
.. code-block:: none
media-ctl -V "'ipu1_csi0':0[fmt:UYVY2X8/640x480@1/60]"
media-ctl -V "'ipu1_csi0':2[fmt:UYVY2X8/640x480@1/30]"
Frame Interval Monitor in ipuX_csiY
-----------------------------------
@ -422,8 +426,7 @@ This pipeline uses the preprocess encode entity to route frames directly
from the CSI to the IC, to carry out scaling up to 1024x1024 resolution,
CSC, flipping, and image rotation:
-> ipuX_csiY:1 -> 0:ipuX_ic_prp:1 -> 0:ipuX_ic_prpenc:1 ->
ipuX_ic_prpenc capture
-> ipuX_csiY:1 -> 0:ipuX_ic_prp:1 -> 0:ipuX_ic_prpenc:1 -> ipuX_ic_prpenc capture
Motion Compensated De-interlace:
--------------------------------
@ -432,8 +435,7 @@ This pipeline routes frames from the CSI direct pad to the VDIC entity to
support motion-compensated de-interlacing (high motion mode only),
scaling up to 1024x1024, CSC, flip, and rotation:
-> ipuX_csiY:1 -> 0:ipuX_vdic:2 -> 0:ipuX_ic_prp:2 ->
0:ipuX_ic_prpvf:1 -> ipuX_ic_prpvf capture
-> ipuX_csiY:1 -> 0:ipuX_vdic:2 -> 0:ipuX_ic_prp:2 -> 0:ipuX_ic_prpvf:1 -> ipuX_ic_prpvf capture
Usage Notes
@ -458,8 +460,8 @@ This platform requires the OmniVision OV5642 module with a parallel
camera interface, and the OV5640 module with a MIPI CSI-2
interface. Both modules are available from Boundary Devices:
https://boundarydevices.com/product/nit6x_5mp
https://boundarydevices.com/product/nit6x_5mp_mipi
- https://boundarydevices.com/product/nit6x_5mp
- https://boundarydevices.com/product/nit6x_5mp_mipi
Note that if only one camera module is available, the other sensor
node can be disabled in the device tree.