korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-24 20:54:10 +08:00
Code Issues Packages Projects Releases Wiki Activity

ARM: SoC platform updates for 4.15

Browse Source 
Most of the commits are for defconfig changes, to enable newly added
 drivers or features that people have started using. For the changed
 lines lines, we have mostly cleanups, the affected platforms are
 OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.
 
 The largest single change is the introduction of the TI "sysc" bus
 driver, with the intention of cleaning up more legacy code.
 
 Two new SoC platforms get added this time:
 - Allwinner R40 is a modernized version of the A20 chip, now
   with a Quad-Core ARM Cortex-A7. According to the manufacturer,
   it is intended for "Smart Hardware"
 - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family
   of chips meant for managed gigabit ethernet switches, based
   around a Cortex-A9 CPU.
 
 Finally, we gain SMP support for two platforms: Renesas R-Car E2
 and Amlogic Meson8/8b, which were previously added but only supported
 uniprocessor operation.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaDgf/AAoJEGCrR//JCVIntcMQAKI2q0Dr2giWtKSoH9GDh5co
 137MamTj1YExIcmtbDVO22jV4WSKhIduo+rRBYmQ/uvrkUe9tf7I172JeAIzMzGf
 HGYJ6fxpaEMUAbUlNcjuXJc7jQXNKLBK2X9CMuwXX3X3HddxKkL38D1d/Mxv5RGu
 G1pEe0j734Qio9LpACnb0xnluwyUBJOYNwo7Agj5RWzOrXZ+TdwkiIW0JdQiG7Z5
 wabzDa7OW1maB+hVYMAM3wHcqO7DKEvGvjYLRoT12cnOLXq7BNbXqXFufuMUNmNE
 ABhWA1h9SYrXT3n5pQLwoonvvTsI7KXCefrZ0wuxbjrdD4yGW1gmgpRee9RfoggD
 A6/62wpmSS61X5QWC6BLEa5v/o5NKewndyWhnjLllgJX8sRUbnPQa/xKv7ngdlN5
 7YL5HWoNpMQv7fEweSc6j5l/F3yRBndn9TpeKiqCiUiNDrIGlZYhYKIcr9rGESFk
 pu2KgK+e9+1k7F4s7LotsA65Q5bZIMveyyVtx0XHXz1G4O8NksoQCLJ3wcqQ2pzI
 WpyOO5R1CNltPhKGC7EP3OZcIMlCtCnsNcedb/AGHgPS+ert2UxBnlSeSMBQlLZY
 4fDwEAlA1qx9PuG9N3xrK/gAFiFLafK2sNxtVc7NSmXkkdm3xgJ95Y9sa72Y2qNO
 rU2LL8SM7cOwhXHrlEFB
 =jlJ2
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "Most of the commits are for defconfig changes, to enable newly added
  drivers or features that people have started using. For the changed
  lines lines, we have mostly cleanups, the affected platforms are OMAP,
  Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.

  The largest single change is the introduction of the TI "sysc" bus
  driver, with the intention of cleaning up more legacy code.

  Two new SoC platforms get added this time:

   - Allwinner R40 is a modernized version of the A20 chip, now with a
     Quad-Core ARM Cortex-A7. According to the manufacturer, it is
     intended for "Smart Hardware"

   - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of
     chips meant for managed gigabit ethernet switches, based around a
     Cortex-A9 CPU.

  Finally, we gain SMP support for two platforms: Renesas R-Car E2 and
  Amlogic Meson8/8b, which were previously added but only supported
  uniprocessor operation"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
  ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module
  ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER
  arm64: defconfig: enable CONFIG_GPIO_UNIPHIER
  ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b
  ARM: meson: Add SMP bringup code for Meson8 and Meson8b
  ARM: smp_scu: allow the platform code to read the SCU CPU status
  ARM: smp_scu: add a helper for powering on a specific CPU
  dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation
  ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init()
  ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init()
  ARM: defconfig: select the right SX150X driver
  arm64: defconfig: Enable QCOM_IOMMU
  arm64: Add ThunderX drivers to defconfig
  arm64: defconfig: Enable Tegra PCI controller
  cpufreq: imx6q: Move speed grading check to cpufreq driver
  arm64: defconfig: re-enable Qualcomm DB410c USB
  ARM: configs: stm32: Add MDMA support in STM32 defconfig
  ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1
  bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
  bus: ti-sysc: mark PM functions as __maybe_unused
  ...
This commit is contained in:
Linus Torvalds 2017-11-16 14:05:12 -08:00
commit 8c60969856
130 changed files with 2269 additions and 3146 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
Documentation/arm/sunxi/README
View File

@ -33,6 +33,11 @@ SunXi family
- Next Thing Co GR8 (sun5i)
* Single ARM Cortex-A7 based SoCs
- Allwinner V3s (sun8i)
+ Datasheet
http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf
* Dual ARM Cortex-A7 based SoCs
- Allwinner A20 (sun7i)
+ User Manual
@ -71,9 +76,11 @@ SunXi family
+ Datasheet
http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
- Allwinner V3s (sun8i)
- Allwinner R40 (sun8i)
+ Datasheet
http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf
https://github.com/tinalinux/docs/raw/r40-v1.y/R40_Datasheet_V1.0.pdf
+ User Manual
https://github.com/tinalinux/docs/raw/r40-v1.y/Allwinner_R40_User_Manual_V1.0.pdf
* Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
- Allwinner A80

18
Documentation/devicetree/bindings/arm/amlogic/pmu.txt Normal file
View File

@ -0,0 +1,18 @@
Amlogic Meson8 and Meson8b power-management-unit:
-------------------------------------------------
The pmu is used to turn off and on different power domains of the SoCs
This includes the power to the CPU cores.
Required node properties:
- compatible value : depending on the SoC this should be one of:
"amlogic,meson8-pmu"
"amlogic,meson8b-pmu"
- reg : physical base address and the size of the registers window
Example:
pmu@c81000e4 {
compatible = "amlogic,meson8b-pmu", "syscon";
reg = <0xc81000e0 0x18>;
};

32
Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt Normal file
View File

@ -0,0 +1,32 @@
Amlogic Meson8 and Meson8b SRAM for smp bringup:
------------------------------------------------
Amlogic's SMP-capable SoCs use part of the sram for the bringup of the cores.
Once the core gets powered up it executes the code that is residing at a
specific location.
Therefore a reserved section sub-node has to be added to the mmio-sram
declaration.
Required sub-node properties:
- compatible : depending on the SoC this should be one of:
"amlogic,meson8-smp-sram"
"amlogic,meson8b-smp-sram"
The rest of the properties should follow the generic mmio-sram discription
found in ../../misc/sram.txt
Example:
sram: sram@d9000000 {
compatible = "mmio-sram";
reg = <0xd9000000 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xd9000000 0x20000>;
smp-sram@1ff80 {
compatible = "amlogic,meson8b-smp-sram";
reg = <0x1ff80 0x8>;
};
};

2
Documentation/devicetree/bindings/arm/cpus.txt
View File

@ -197,6 +197,8 @@ described below.
"actions,s500-smp"
"allwinner,sun6i-a31"
"allwinner,sun8i-a23"
"amlogic,meson8-smp"
"amlogic,meson8b-smp"
"arm,realview-smp"
"brcm,bcm11351-cpu-method"
"brcm,bcm23550"

2
Documentation/devicetree/bindings/arm/omap/ctrl.txt
View File

@ -21,6 +21,8 @@ Required properties:
"ti,omap3-scm"
"ti,omap4-scm-core"
"ti,omap4-scm-padconf-core"
"ti,omap4-scm-wkup"
"ti,omap4-scm-padconf-wkup"
"ti,omap5-scm-core"
"ti,omap5-scm-padconf-core"
"ti,dra7-scm-core"

2
Documentation/devicetree/bindings/arm/sunxi.txt
View File

@ -14,6 +14,8 @@ using one of the following compatible strings:
allwinner,sun8i-a83t
allwinner,sun8i-h2-plus
allwinner,sun8i-h3
allwinner-sun8i-r40
allwinner,sun8i-v3s
allwinner,sun9i-a80
allwinner,sun50i-a64
nextthing,gr8

93
Documentation/devicetree/bindings/bus/ti-sysc.txt Normal file
View File

@ -0,0 +1,93 @@
Texas Instruments sysc interconnect target module wrapper binding
Texas Instruments SoCs can have a generic interconnect target module
hardware for devices connected to various interconnects such as L3
interconnect (Arteris NoC) and L4 interconnect (Sonics s3220). The sysc
is mostly used for interaction between module and PRCM. It participates
in the OCP Disconnect Protocol but other than that is mostly independent
of the interconnect.
Each interconnect target module can have one or more devices connected to
it. There is a set of control registers for managing interconnect target
module clocks, idle modes and interconnect level resets for the module.
These control registers are sprinkled into the unused register address
space of the first child device IP block managed by the interconnect
target module and typically are named REVISION, SYSCONFIG and SYSSTATUS.
Required standard properties:
- compatible shall be one of the following generic types:
"ti,sysc-omap2"
"ti,sysc-omap4"
"ti,sysc-omap4-simple"
or one of the following derivative types for hardware
needing special workarounds:
"ti,sysc-omap3430-sr"
"ti,sysc-omap3630-sr"
"ti,sysc-omap4-sr"
"ti,sysc-omap3-sham"
"ti,sysc-omap-aes"
"ti,sysc-mcasp"
"ti,sysc-usb-host-fs"
- reg shall have register areas implemented for the interconnect
target module in question such as revision, sysc and syss
- reg-names shall contain the register names implemented for the
interconnect target module in question such as
"rev, "sysc", and "syss"
- ranges shall contain the interconnect target module IO range
available for one or more child device IP blocks managed
by the interconnect target module, the ranges may include
multiple ranges such as device L4 range for control and
parent L3 range for DMA access
Optional properties:
- clocks clock specifier for each name in the clock-names as
specified in the binding documentation for ti-clkctrl,
typically available for all interconnect targets on TI SoCs
based on omap4 except if it's read-only register in hwauto
mode as for example omap4 L4_CFG_CLKCTRL
- clock-names should contain at least "fck", and optionally also "ick"
depending on the SoC and the interconnect target module
- ti,hwmods optional TI interconnect module name to use legacy
hwmod platform data
Example: Single instance of MUSB controller on omap4 using interconnect ranges
using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */
compatible = "ti,sysc-omap2";
ti,hwmods = "usb_otg_hs";
reg = <0x2b400 0x4>,
<0x2b404 0x4>,
<0x2b408 0x4>;
reg-names = "rev", "sysc", "syss";
clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x2b000 0x1000>;
usb_otg_hs: otg@0 {
compatible = "ti,omap4-musb";
reg = <0x0 0x7ff>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
usb-phy = <&usb2_phy>;
...
};
};
Note that other SoCs, such as am335x can have multipe child devices. On am335x
there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA
instance as children of a single interconnet target module.

6
Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
View File

@ -7,8 +7,10 @@ of the EMIF IP and memory parts attached to it.
Required properties:
- compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
is the IP revision of the specific EMIF instance.
For am437x should be ti,emif-am4372.
is the IP revision of the specific EMIF instance. For newer controllers,
compatible should be one of the following:
"ti,emif-am3352"
"ti,emif-am4372"
- phy-type : <u32> indicating the DDR phy type. Following are the
allowed values

47
Documentation/devicetree/bindings/power/ti-smartreflex.txt Normal file
View File

@ -0,0 +1,47 @@
Texas Instruments SmartReflex binding
SmartReflex is used to set and adjust the SoC operating points.
Required properties:
compatible: Shall be one of the following:
"ti,omap3-smartreflex-core"
"ti,omap3-smartreflex-iva"
"ti,omap4-smartreflex-core"
"ti,omap4-smartreflex-mpu"
"ti,omap4-smartreflex-iva"
reg: Shall contain the device instance IO range
interrupts: Shall contain the device instance interrupt
Optional properties:
ti,hwmods: Shall contain the TI interconnect module name if needed
by the SoC
Example:
smartreflex_iva: smartreflex@4a0db000 {
compatible = "ti,omap4-smartreflex-iva";
reg = <0x4a0db000 0x80>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "smartreflex_iva";
};
smartreflex_core: smartreflex@4a0dd000 {
compatible = "ti,omap4-smartreflex-core";
reg = <0x4a0dd000 0x80>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "smartreflex_core";
};
smartreflex_mpu: smartreflex@4a0d9000 {
compatible = "ti,omap4-smartreflex-mpu";
reg = <0x4a0d9000 0x80>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "smartreflex_mpu";
};

2
MAINTAINERS
View File

@ -2162,7 +2162,6 @@ F: sound/soc/zte/
ARM/ZYNQ ARCHITECTURE
M: Michal Simek <michal.simek@xilinx.com>
R: Sören Brinkmann <soren.brinkmann@xilinx.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://wiki.xilinx.com
T: git https://github.com/Xilinx/linux-xlnx.git
@ -2937,6 +2936,7 @@ N: bcm583*
N: bcm585*
N: bcm586*
N: bcm88312
N: hr2
F: arch/arm64/boot/dts/broadcom/ns2*
F: drivers/clk/bcm/clk-ns*
F: drivers/pinctrl/bcm/pinctrl-ns*

2
arch/arm/Kconfig
View File

@ -371,7 +371,7 @@ config ARCH_EBSA110
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SPARSEMEM_ENABLE
select ARM_AMBA
imply ARM_PATCH_PHYS_VIRT
select ARM_VIC

20
arch/arm/Kconfig.debug
View File

@ -170,6 +170,11 @@ choice
depends on ARCH_BCM_5301X || ARCH_BCM_NSP
select DEBUG_UART_8250
config DEBUG_BCM_HR2
bool "Kernel low-level debugging on Hurricane 2 UART2"
depends on ARCH_BCM_HR2
select DEBUG_UART_8250
config DEBUG_BCM_KONA_UART
bool "Kernel low-level debugging messages via BCM KONA UART"
depends on ARCH_BCM_MOBILE
@ -912,6 +917,13 @@ choice
Say Y here if you want kernel low-level debugging support
via SCIF2 on Renesas R-Car E2 (R8A7794).
config DEBUG_RCAR_GEN2_SCIF4
bool "Kernel low-level debugging messages via SCIF4 on R8A7745"
depends on ARCH_R8A7745
help
Say Y here if you want kernel low-level debugging support
via SCIF4 on Renesas RZ/G1E (R8A7745).
config DEBUG_RMOBILE_SCIFA0
bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4"
depends on ARCH_R8A73A4
@ -1452,6 +1464,7 @@ config DEBUG_LL_INCLUDE
default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2
default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
@ -1509,6 +1522,7 @@ config DEBUG_UART_PHYS
default 0x11009000 if DEBUG_MT8135_UART3
default 0x16000000 if DEBUG_INTEGRATOR
default 0x18000300 if DEBUG_BCM_5301X
default 0x18000400 if DEBUG_BCM_HR2
default 0x18010000 if DEBUG_SIRFATLAS7_UART0
default 0x18020000 if DEBUG_SIRFATLAS7_UART1
default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
@ -1571,6 +1585,7 @@ config DEBUG_UART_PHYS
default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4
default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2
default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
default 0xe8008000 if DEBUG_R7S72100_SCIF2
default 0xf0000be0 if ARCH_EBSA110
default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
@ -1605,6 +1620,7 @@ config DEBUG_UART_PHYS
DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
DEBUG_RCAR_GEN2_SCIF4 || \
DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
DEBUG_S3C64XX_UART || \
@ -1624,6 +1640,7 @@ config DEBUG_UART_VIRT
default 0xf01fb000 if DEBUG_NOMADIK_UART
default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
default 0xf1000300 if DEBUG_BCM_5301X
default 0xf1000400 if DEBUG_BCM_HR2
default 0xf1002000 if DEBUG_MT8127_UART0
default 0xf1006000 if DEBUG_MT6589_UART0
default 0xf1009000 if DEBUG_MT8135_UART3
@ -1729,7 +1746,8 @@ config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3
DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \
DEBUG_OMAP7XXUART3
default 2
config DEBUG_UART_8250_WORD

1
arch/arm/Makefile
View File

@ -149,6 +149,7 @@ textofs-$(CONFIG_SA1111) := 0x00208000
endif
textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
textofs-$(CONFIG_ARCH_MESON) := 0x00208000
textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
# Machine directory name. This list is sorted alphanumerically

10
arch/arm/boot/dts/am33xx.dtsi
View File

@ -130,9 +130,11 @@
};
};
pmu {
pmu@4b000000 {
compatible = "arm,cortex-a8-pmu";
interrupts = <3>;
reg = <0x4b000000 0x1000000>;
ti,hwmods = "debugss";
};
/*
@ -929,6 +931,12 @@
};
};
emif: emif@4c000000 {
compatible = "ti,emif-am3352";
reg = <0x4c000000 0x1000000>;
ti,hwmods = "emif";
};
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";

34
arch/arm/boot/dts/dra7.dtsi
View File

@ -457,6 +457,7 @@
#dma-cells = <1>;
dma-channels = <32>;
dma-requests = <127>;
ti,hwmods = "dma_system";
};
edma: edma@43300000 {
@ -1069,6 +1070,13 @@
max-frequency = <192000000>;
};
hdqw1w: 1w@480b2000 {
compatible = "ti,omap3-1w";
reg = <0x480b2000 0x1000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "hdq1w";
};
mmc2: mmc@480b4000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480b4000 0x400>;
@ -1489,6 +1497,32 @@
};
};
target-module@4a0dd000 {
compatible = "ti,sysc-omap4-sr";
ti,hwmods = "smartreflex_core";
reg = <0x4a0dd000 0x4>,
<0x4a0dd008 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a0dd000 0x001000>;
/* SmartReflex child device marked reserved in TRM */
};
target-module@4a0d9000 {
compatible = "ti,sysc-omap4-sr";
ti,hwmods = "smartreflex_mpu";
reg = <0x4a0d9000 0x4>,
<0x4a0d9008 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a0d9000 0x001000>;
/* SmartReflex child device marked reserved in TRM */
};
omap_dwc3_1: omap_dwc3_1@48880000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss1";

1
arch/arm/boot/dts/omap3.dtsi
View File

@ -215,6 +215,7 @@
#dma-cells = <1>;
dma-channels = <32>;
dma-requests = <96>;
ti,hwmods = "dma";
};
gpio1: gpio@48310000 {

256
arch/arm/boot/dts/omap4.dtsi
View File

@ -51,6 +51,17 @@
};
};
/*
* Note that 4430 needs cross trigger interface (CTI) supported
* before we can configure the interrupts. This means sampling
* events are not supported for pmu. Note that 4460 does not use
* CTI, see also 4460.dtsi.
*/
pmu {
compatible = "arm,cortex-a9-pmu";
ti,hwmods = "debugss";
};
gic: interrupt-controller@48241000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
@ -163,6 +174,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x2000 0x1000>;
ti,hwmods = "ctrl_module_core";
scm_conf: scm_conf@0 {
compatible = "syscon";
@ -175,9 +187,11 @@
omap4_padconf_core: scm@100000 {
compatible = "ti,omap4-scm-padconf-core",
"simple-bus";
reg = <0x100000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x100000 0x1000>;
ti,hwmods = "ctrl_module_pad_core";
omap4_pmx_core: pinmux@40 {
compatible = "ti,omap4-padconf",
@ -252,17 +266,33 @@
};
};
omap4_pmx_wkup: pinmux@1e040 {
compatible = "ti,omap4-padconf",
"pinctrl-single";
reg = <0x1e040 0x0038>;
omap4_scm_wkup: scm@c000 {
compatible = "ti,omap4-scm-wkup";
reg = <0xc000 0x1000>;
ti,hwmods = "ctrl_module_wkup";
};
omap4_padconf_wkup: padconf@1e000 {
compatible = "ti,omap4-scm-padconf-wkup",
"simple-bus";
reg = <0x1e000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
#pinctrl-cells = <1>;
#interrupt-cells = <1>;
interrupt-controller;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0x7fff>;
#size-cells = <1>;
ranges = <0 0x1e000 0x1000>;
ti,hwmods = "ctrl_module_pad_wkup";
omap4_pmx_wkup: pinmux@40 {
compatible = "ti,omap4-padconf",
"pinctrl-single";
reg = <0x40 0x0038>;
#address-cells = <1>;
#size-cells = <0>;
#pinctrl-cells = <1>;
#interrupt-cells = <1>;
interrupt-controller;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0x7fff>;
};
};
};
};
@ -282,6 +312,7 @@
#dma-cells = <1>;
dma-channels = <32>;
dma-requests = <127>;
ti,hwmods = "dma_system";
};
gpio1: gpio@4a310000 {
@ -351,6 +382,19 @@
#interrupt-cells = <2>;
};
target-module@48076000 {
compatible = "ti,sysc-omap4";
ti,hwmods = "slimbus2";
reg = <0x48076000 0x4>,
<0x48076010 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x48076000 0x001000>;
/* No child device binding or driver in mainline */
};
elm: elm@48078000 {
compatible = "ti,am3352-elm";
reg = <0x48078000 0x2000>;
@ -411,6 +455,57 @@
clock-frequency = <48000000>;
};
target-module@4a0db000 {
compatible = "ti,sysc-sr";
ti,hwmods = "smartreflex_iva";
reg = <0x4a0db000 0x4>,
<0x4a0db008 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a0db000 0x001000>;
smartreflex_iva: smartreflex@0 {
compatible = "ti,omap4-smartreflex-iva";
reg = <0 0x80>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
};
};
target-module@4a0dd000 {
compatible = "ti,sysc-sr";
ti,hwmods = "smartreflex_core";
reg = <0x4a0dd000 0x4>,
<0x4a0dd008 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a0dd000 0x001000>;
smartreflex_core: smartreflex@0 {
compatible = "ti,omap4-smartreflex-core";
reg = <0 0x80>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
};
};
target-module@4a0d9000 {
compatible = "ti,sysc-sr";
ti,hwmods = "smartreflex_mpu";
reg = <0x4a0d9000 0x4>,
<0x4a0d9008 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a0d9000 0x001000>;
smartreflex_mpu: smartreflex@0 {
compatible = "ti,omap4-smartreflex-mpu";
reg = <0 0x80>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
};
};
hwspinlock: spinlock@4a0f6000 {
compatible = "ti,omap4-hwspinlock";
reg = <0x4a0f6000 0x1000>;
@ -489,6 +584,13 @@
dma-names = "tx0", "rx0", "tx1", "rx1";
};
hdqw1w: 1w@480b2000 {
compatible = "ti,omap3-1w";
reg = <0x480b2000 0x1000>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "hdq1w";
};
mcspi3: spi@480b8000 {
compatible = "ti,omap4-mcspi";
reg = <0x480b8000 0x200>;
@ -565,6 +667,40 @@
dma-names = "tx", "rx";
};
hsi: hsi@4a058000 {
compatible = "ti,omap4-hsi";
reg = <0x4a058000 0x4000>,
<0x4a05c000 0x1000>;
reg-names = "sys", "gdd";
ti,hwmods = "hsi";
clocks = <&hsi_fck>;
clock-names = "hsi_fck";
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gdd_mpu";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a058000 0x4000>;
hsi_port1: hsi-port@2000 {
compatible = "ti,omap4-hsi-port";
reg = <0x2000 0x800>,
<0x2800 0x800>;
reg-names = "tx", "rx";
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
};
hsi_port2: hsi-port@3000 {
compatible = "ti,omap4-hsi-port";
reg = <0x3000 0x800>,
<0x3800 0x800>;
reg-names = "tx", "rx";
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
};
};
mmu_dsp: mmu@4a066000 {
compatible = "ti,omap4-iommu";
reg = <0x4a066000 0x100>;
@ -573,6 +709,19 @@
#iommu-cells = <0>;
};
target-module@52000000 {
compatible = "ti,sysc-omap4";
ti,hwmods = "iss";
reg = <0x52000000 0x4>,
<0x52000010 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x52000000 0x1000000>;
/* No child device binding, driver in staging */
};
mmu_ipu: mmu@55082000 {
compatible = "ti,omap4-iommu";
reg = <0x55082000 0x100>;
@ -589,6 +738,14 @@
ti,hwmods = "wd_timer2";
};
wdt3: wdt@40130000 {
compatible = "ti,omap4-wdt", "ti,omap3-wdt";
reg = <0x40130000 0x80>, /* MPU private access */
<0x49030000 0x80>; /* L3 Interconnect */
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "wd_timer3";
};
mcpdm: mcpdm@40132000 {
compatible = "ti,omap4-mcpdm";
reg = <0x40132000 0x7f>, /* MPU private access */
@ -659,6 +816,56 @@
status = "disabled";
};
target-module@40128000 {
compatible = "ti,sysc-mcasp";
ti,hwmods = "mcasp";
reg = <0x40128004 0x4>;
reg-names = "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x40128000 0x1000>, /* MPU */
<0x49028000 0x49028000 0x1000>; /* L3 */
/*
* Child device unsupported by davinci-mcasp. At least
* TX path is disabled for omap4, and only DIT mode
* works with no I2S. See also old Android kernel
* omap-mcasp driver for more information.
*/
};
target-module@4012c000 {
compatible = "ti,sysc-omap4";
ti,hwmods = "slimbus1";
reg = <0x4012c000 0x4>,
<0x4012c010 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */
<0x4902c000 0x4902c000 0x1000>; /* L3 */
/* No child device binding or driver in mainline */
};
target-module@401f1000 {
compatible = "ti,sysc-omap4";
ti,hwmods = "aess";
reg = <0x401f1000 0x4>,
<0x401f1010 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x401f1000 0x1000>, /* MPU */
<0x490f1000 0x490f1000 0x1000>; /* L3 */
/*
* No child device binding or driver in mainline.
* See Android tree and related upstreaming efforts
* for the old driver.
*/
};
mcbsp4: mcbsp@48096000 {
compatible = "ti,omap4-mcbsp";
reg = <0x48096000 0xff>; /* L4 Interconnect */
@ -747,6 +954,19 @@
};
};
target-module@4a10a000 {
compatible = "ti,sysc-omap4";
ti,hwmods = "fdif";
reg = <0x4a10a000 0x4>,
<0x4a10a010 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a10a000 0x1000>;
/* No child device binding or driver in mainline */
};
timer1: timer@4a318000 {
compatible = "ti,omap3430-timer";
reg = <0x4a318000 0x80>;
@ -962,6 +1182,22 @@
status = "disabled";
};
target-module@56000000 {
compatible = "ti,sysc-omap4";
ti,hwmods = "gpu";
reg = <0x5601fc00 0x4>,
<0x5601fc10 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x56000000 0x2000000>;
/*
* Closed source PowerVR driver, no child device
* binding or driver in mainline
*/
};
dss: dss@58000000 {
compatible = "ti,omap4-dss";
reg = <0x58000000 0x80>;

1
arch/arm/boot/dts/omap5.dtsi
View File

@ -295,6 +295,7 @@
#dma-cells = <1>;
dma-channels = <32>;
dma-requests = <127>;
ti,hwmods = "dma_system";
};
gpio1: gpio@4ae10000 {

4
arch/arm/configs/davinci_all_defconfig
View File

@ -34,6 +34,7 @@ CONFIG_DAVINCI_MUX_WARNINGS=y
CONFIG_DAVINCI_RESET_CLOCKS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_CMA=y
CONFIG_SECCOMP=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
@ -56,9 +57,11 @@ CONFIG_NETFILTER=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FW_LOADER is not set
CONFIG_DMA_CMA=y
CONFIG_DA8XX_MSTPRI=y
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
CONFIG_MTD_CMDLINE_PARTS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_CFI=m
CONFIG_MTD_CFI_INTELEXT=m
@ -195,7 +198,6 @@ CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_DAVINCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

2
arch/arm/configs/exynos_defconfig
View File

@ -244,7 +244,7 @@ CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
CONFIG_USB_UAS=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC2=y
CONFIG_USB_HSIC_USB3503=y

2
arch/arm/configs/imx_v6_v7_defconfig
View File

@ -250,6 +250,7 @@ CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
CONFIG_DRM_DW_HDMI_CEC=y
CONFIG_DRM_IMX=y
CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
CONFIG_DRM_IMX_TVE=y
@ -365,6 +366,7 @@ CONFIG_PWM=y
CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_IMX=y
CONFIG_NVMEM_IMX_OCOTP=y
CONFIG_MUX_MMIO=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y

2
arch/arm/configs/keystone_defconfig
View File

@ -189,6 +189,8 @@ CONFIG_KEYSTONE_NAVIGATOR_DMA=y
CONFIG_TI_SCI_PM_DOMAINS=y
CONFIG_MEMORY=y
CONFIG_TI_AEMIF=y
CONFIG_PWM=y
CONFIG_PWM_TIECAP=m
CONFIG_KEYSTONE_IRQ=y
CONFIG_RESET_TI_SCI=m
CONFIG_RESET_TI_SYSCON=m

2
arch/arm/configs/lpc32xx_defconfig
View File

@ -108,11 +108,11 @@ CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_SX150X=y
CONFIG_GPIO_74X164=y
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
CONFIG_PINCTRL_MCP23S08=y
CONFIG_PINCTRL_SX150X=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_MAX6639=y
CONFIG_WATCHDOG=y

7
arch/arm/configs/multi_v7_defconfig
View File

@ -31,6 +31,7 @@ CONFIG_SOC_SAMA5D3=y
CONFIG_SOC_SAMA5D4=y
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM_CYGNUS=y
CONFIG_ARCH_BCM_HR2=y
CONFIG_ARCH_BCM_NSP=y
CONFIG_ARCH_BCM_21664=y
CONFIG_ARCH_BCM_281XX=y
@ -420,6 +421,7 @@ CONFIG_GPIO_DAVINCI=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EM=y
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_ZYNQ=y
CONFIG_GPIO_PCA953X=y
@ -689,10 +691,12 @@ CONFIG_USB_OHCI_EXYNOS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_RENESAS_USBHS=m
CONFIG_USB_STORAGE=y
CONFIG_USB_UAS=m
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_SUNXI=m
CONFIG_USB_DWC3=y
CONFIG_USB_DWC2=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
@ -727,6 +731,7 @@ CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_ATMELMCI=y
CONFIG_MMC_SDHCI_MSM=y
CONFIG_MMC_MESON_MX_SDIO=y
CONFIG_MMC_MVSDIO=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_DW=y
@ -767,6 +772,7 @@ CONFIG_RTC_DRV_MAX8997=m
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_ST_LPC=y
CONFIG_RTC_DRV_TWL4030=y
@ -849,6 +855,7 @@ CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_REMOTEPROC=m
CONFIG_ST_REMOTEPROC=m
CONFIG_RPMSG_VIRTIO=m
CONFIG_PM_DEVFREQ=y
CONFIG_ARM_TEGRA_DEVFREQ=m
CONFIG_MEMORY=y

42
arch/arm/configs/qcom_defconfig
View File

@ -1,5 +1,4 @@
CONFIG_SYSVIPC=y
CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
@ -28,9 +27,7 @@ CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCIE_QCOM=y
CONFIG_SMP=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_CLEANCACHE=y
CONFIG_ARM_APPENDED_DTB=y
@ -57,14 +54,13 @@ CONFIG_CFG80211=y
CONFIG_RFKILL=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_QCOM_EBI2=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
CONFIG_QCOM_COINCELL=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
@ -87,6 +83,7 @@ CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_ZAURUS is not set
CONFIG_BRCMFMAC=m
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
@ -98,12 +95,15 @@ CONFIG_INPUT_MISC=y
CONFIG_INPUT_PM8XXX_VIBRATOR=y
CONFIG_INPUT_PMIC8XXX_PWRKEY=y
CONFIG_INPUT_UINPUT=y
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_MSM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_QUP=y
@ -121,11 +121,10 @@ CONFIG_PINCTRL_MSM8X74=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_CHARGER_QCOM_SMBB=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_MSM=y
CONFIG_CHARGER_QCOM_SMBB=y
CONFIG_THERMAL=y
CONFIG_QCOM_TSENS=y
CONFIG_MFD_PM8XXX=y
@ -135,8 +134,14 @@ CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_QCOM_RPM=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_FB=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_LP855X=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_DYNAMIC_MINORS=y
@ -155,15 +160,21 @@ CONFIG_USB_ACM=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_CHIPIDEA_ULPI=y
CONFIG_USB_SERIAL=y
CONFIG_USB_HSIC_USB4604=y
CONFIG_USB_MSM_OTG=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_VBUS_DRAW=500
CONFIG_USB_CONFIGFS=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_ULPI_BUS=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=32
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_QCOM_DML=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_MSM=y
@ -173,7 +184,6 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PM8058=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RPMSG_QCOM_SMD=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PM8XXX=y
CONFIG_DMADEVICES=y
@ -187,15 +197,17 @@ CONFIG_IPQ_GCC_4019=y
CONFIG_IPQ_LCC_806X=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_LCC_8960=y
CONFIG_MDM_GCC_9615=y
CONFIG_MDM_LCC_9615=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_REMOTEPROC=y
CONFIG_QCOM_ADSP_PIL=y
CONFIG_QCOM_Q6V5_PIL=y
CONFIG_QCOM_WCNSS_PIL=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_QCOM_SMD=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_PM=y
CONFIG_QCOM_SMEM=y
@ -203,6 +215,7 @@ CONFIG_QCOM_SMD_RPM=y
CONFIG_QCOM_SMP2P=y
CONFIG_QCOM_SMSM=y
CONFIG_QCOM_WCNSS_CTRL=y
CONFIG_EXTCON_QCOM_SPMI_MISC=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_SW_TRIGGER=y
@ -211,9 +224,11 @@ CONFIG_MPU3050_I2C=y
CONFIG_AK8975=y
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_BMP280=y
CONFIG_PWM=y
CONFIG_PHY_QCOM_APQ8064_SATA=y
CONFIG_PHY_QCOM_IPQ806X_SATA=y
CONFIG_NVMEM=y
CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_QCOM_USB_HSIC=y
CONFIG_QCOM_QFPROM=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
@ -234,7 +249,4 @@ CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_TIMER_STATS=y

11
arch/arm/configs/stm32_defconfig
View File

@ -18,7 +18,6 @@ CONFIG_EMBEDDED=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_MMU is not set
CONFIG_ARM_SINGLE_ARMV7M=y
CONFIG_ARCH_STM32=y
CONFIG_CPU_V7M_NUM_IRQ=240
CONFIG_SET_MEM_PARAM=y
@ -44,18 +43,18 @@ CONFIG_KEYBOARD_GPIO=y
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_STM32=y
CONFIG_SERIAL_STM32_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_STM32F4=y
CONFIG_I2C_STM32F7=y
CONFIG_GPIO_STMPE=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_REGULATOR=y
CONFIG_GPIO_STMPE=y
CONFIG_MFD_STMPE=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_USB_SUPPORT is not set
CONFIG_NEW_LEDS=y
@ -67,6 +66,8 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_STM32=y
CONFIG_DMADEVICES=y
CONFIG_STM32_DMA=y
CONFIG_STM32_DMAMUX=y
CONFIG_STM32_MDMA=y
CONFIG_IIO=y
CONFIG_STM32_ADC_CORE=y
CONFIG_STM32_ADC=y
@ -81,8 +82,6 @@ CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FTRACE is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_DEV_STM32=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC7=y

12
arch/arm/include/asm/smp_scu.h
View File

@ -28,6 +28,8 @@ static inline unsigned long scu_a9_get_base(void)
#ifdef CONFIG_HAVE_ARM_SCU
unsigned int scu_get_core_count(void __iomem *);
int scu_power_mode(void __iomem *, unsigned int);
int scu_cpu_power_enable(void __iomem *, unsigned int);
int scu_get_cpu_power_mode(void __iomem *scu_base, unsigned int logical_cpu);
#else
static inline unsigned int scu_get_core_count(void __iomem *scu_base)
{
@ -37,6 +39,16 @@ static inline int scu_power_mode(void __iomem *scu_base, unsigned int mode)
{
return -EINVAL;
}
static inline int scu_cpu_power_enable(void __iomem *scu_base,
unsigned int mode)
{
return -EINVAL;
}
static inline int scu_get_cpu_power_mode(void __iomem *scu_base,
unsigned int logical_cpu)
{
return -EINVAL;
}
#endif
#if defined(CONFIG_SMP) && defined(CONFIG_HAVE_ARM_SCU)

3
arch/arm/include/debug/brcmstb.S
View File

@ -58,6 +58,7 @@
/* Check SUN_TOP_CTRL base */
ldr \rp, =SUN_TOP_CTRL_BASE @ load SUN_TOP_CTRL PA
ldr \rv, [\rp, #0] @ get register contents
ARM_BE8( rev \rv, \rv )
and \rv, \rv, #0xffffff00 @ strip revision bits [7:0]
/* Chip specific detection starts here */
@ -98,11 +99,13 @@
.endm
.macro store, rd, rx:vararg
ARM_BE8( rev \rd, \rd )
str \rd, \rx
.endm
.macro load, rd, rx:vararg
ldr \rd, \rx
ARM_BE8( rev \rd, \rd )
.endm
.macro senduart,rd,rx

1
arch/arm/include/uapi/asm/ptrace.h
View File

@ -58,6 +58,7 @@
#endif
#define FIQ_MODE 0x00000011
#define IRQ_MODE 0x00000012
#define MON_MODE 0x00000016
#define ABT_MODE 0x00000017
#define HYP_MODE 0x0000001a
#define UND_MODE 0x0000001b

45
arch/arm/kernel/smp_scu.c
View File

@ -21,6 +21,7 @@
#define SCU_STANDBY_ENABLE (1 << 5)
#define SCU_CONFIG 0x04
#define SCU_CPU_STATUS 0x08
#define SCU_CPU_STATUS_MASK GENMASK(1, 0)
#define SCU_INVALIDATE 0x0c
#define SCU_FPGA_REVISION 0x10
@ -72,6 +73,24 @@ void scu_enable(void __iomem *scu_base)
}
#endif
static int scu_set_power_mode_internal(void __iomem *scu_base,
unsigned int logical_cpu,
unsigned int mode)
{
unsigned int val;
int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(logical_cpu), 0);
if (mode > 3 || mode == 1 || cpu > 3)
return -EINVAL;
val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu);
val &= ~SCU_CPU_STATUS_MASK;
val |= mode;
writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu);
return 0;
}
/*
* Set the executing CPUs power mode as defined. This will be in
* preparation for it executing a WFI instruction.
@ -82,15 +101,27 @@ void scu_enable(void __iomem *scu_base)
*/
int scu_power_mode(void __iomem *scu_base, unsigned int mode)
{
unsigned int val;
int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
return scu_set_power_mode_internal(scu_base, smp_processor_id(), mode);
}
if (mode > 3 || mode == 1 || cpu > 3)
/*
* Set the given (logical) CPU's power mode to SCU_PM_NORMAL.
*/
int scu_cpu_power_enable(void __iomem *scu_base, unsigned int cpu)
{
return scu_set_power_mode_internal(scu_base, cpu, SCU_PM_NORMAL);
}
int scu_get_cpu_power_mode(void __iomem *scu_base, unsigned int logical_cpu)
{
unsigned int val;
int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(logical_cpu), 0);
if (cpu > 3)
return -EINVAL;
val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
val |= mode;
writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu);
val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu);
val &= SCU_CPU_STATUS_MASK;
return 0;
return val;
}

4
arch/arm/mach-actions/Makefile
View File

@ -1,3 +1 @@
obj-${CONFIG_SMP} += platsmp.o headsmp.o
AFLAGS_headsmp.o := -Wa,-march=armv7-a
obj-${CONFIG_SMP} += platsmp.o

52
arch/arm/mach-actions/headsmp.S
View File

@ -1,52 +0,0 @@
/*
* Copyright 2012 Actions Semi Inc.
* Author: Actions Semi, Inc.
*
* Copyright (c) 2017 Andreas Färber
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/linkage.h>
#include <linux/init.h>
ENTRY(owl_v7_invalidate_l1)
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 2, r0, c0, c0, 0
mrc p15, 1, r0, c0, c0, 0
ldr r1, =0x7fff
and r2, r1, r0, lsr #13
ldr r1, =0x3ff
and r3, r1, r0, lsr #3 @ NumWays - 1
add r2, r2, #1 @ NumSets
and r0, r0, #0x7
add r0, r0, #4 @ SetShift
clz r1, r3 @ WayShift
add r4, r3, #1 @ NumWays
1: sub r2, r2, #1 @ NumSets--
mov r3, r4 @ Temp = NumWays
2: subs r3, r3, #1 @ Temp--
mov r5, r3, lsl r1
mov r6, r2, lsl r0
orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
mcr p15, 0, r5, c7, c6, 2
bgt 2b
cmp r2, #0
bgt 1b
dsb
isb
mov pc, lr
ENDPROC(owl_v7_invalidate_l1)
ENTRY(owl_secondary_startup)
bl owl_v7_invalidate_l1
b secondary_startup

2
arch/arm/mach-actions/platsmp.c
View File

@ -71,7 +71,7 @@ static int s500_wakeup_secondary(unsigned int cpu)
/* wait for CPUx to run to WFE instruction */
udelay(200);
writel(virt_to_phys(owl_secondary_startup),
writel(__pa_symbol(secondary_startup),
timer_base_addr + OWL_CPU1_ADDR + (cpu - 1) * 4);
writel(OWL_CPUx_FLAG_BOOT,
timer_base_addr + OWL_CPU1_FLAG + (cpu - 1) * 4);

9
arch/arm/mach-bcm/Kconfig
View File

@ -37,6 +37,15 @@ config ARCH_BCM_CYGNUS
BCM11300, BCM11320, BCM11350, BCM11360,
BCM58300, BCM58302, BCM58303, BCM58305.
config ARCH_BCM_HR2
bool "Broadcom Hurricane 2 SoC support"
depends on ARCH_MULTI_V7
select ARCH_BCM_IPROC
help
Enable support for the Hurricane 2 family,
which includes the following variants:
BCM53342, BCM53343, BCM53344, BCM53346.
config ARCH_BCM_NSP
bool "Broadcom Northstar Plus SoC Support"
depends on ARCH_MULTI_V7

8
arch/arm/mach-bcm/Makefile
View File

@ -13,6 +13,9 @@
# Cygnus
obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o
# Hurricane 2
obj-$(CONFIG_ARCH_BCM_HR2) += bcm_hr2.o
# Northstar Plus
obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o
@ -43,6 +46,11 @@ endif
# BCM2835
obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
ifeq ($(CONFIG_ARCH_BCM2835),y)
ifeq ($(CONFIG_ARM),y)
obj-$(CONFIG_SMP) += platsmp.o
endif
endif
# BCM5301X
obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o

25
arch/arm/mach-bcm/bcm_hr2.c Normal file
View File

@ -0,0 +1,25 @@
/*
* Copyright (C) 2017 Broadcom
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <asm/mach/arch.h>
static const char * const bcm_hr2_dt_compat[] __initconst = {
"brcm,hr2",
NULL,
};
DT_MACHINE_START(BCM_HR2_DT, "Broadcom Hurricane 2 SoC")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
.dt_compat = bcm_hr2_dt_compat,
MACHINE_END

11
arch/arm/mach-bcm/board_bcm2835.c
View File

@ -15,15 +15,11 @@
#include <linux/init.h>
#include <linux/irqchip.h>
#include <linux/of_address.h>
#include <linux/clk/bcm2835.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
static void __init bcm2835_init(void)
{
bcm2835_init_clocks();
}
#include "platsmp.h"
static const char * const bcm2835_compat[] = {
#ifdef CONFIG_ARCH_MULTI_V6
@ -31,11 +27,12 @@ static const char * const bcm2835_compat[] = {
#endif
#ifdef CONFIG_ARCH_MULTI_V7
"brcm,bcm2836",
"brcm,bcm2837",
#endif
NULL
};
DT_MACHINE_START(BCM2835, "BCM2835")
.init_machine = bcm2835_init,
.dt_compat = bcm2835_compat
.dt_compat = bcm2835_compat,
.smp = smp_ops(bcm2836_smp_ops),
MACHINE_END

38
arch/arm/mach-bcm/platsmp.c
View File

@ -17,6 +17,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irqchip/irq-bcm2836.h>
#include <linux/jiffies.h>
#include <linux/of.h>
#include <linux/of_address.h>
@ -287,6 +288,38 @@ out:
return ret;
}
static int bcm2836_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
void __iomem *intc_base;
struct device_node *dn;
char *name;
name = "brcm,bcm2836-l1-intc";
dn = of_find_compatible_node(NULL, NULL, name);
if (!dn) {
pr_err("unable to find intc node\n");
return -ENODEV;
}
intc_base = of_iomap(dn, 0);
of_node_put(dn);
if (!intc_base) {
pr_err("unable to remap intc base register\n");
return -ENOMEM;
}
writel(virt_to_phys(secondary_startup),
intc_base + LOCAL_MAILBOX3_SET0 + 16 * cpu);
dsb(sy);
sev();
iounmap(intc_base);
return 0;
}
static const struct smp_operations kona_smp_ops __initconst = {
.smp_prepare_cpus = bcm_smp_prepare_cpus,
.smp_boot_secondary = kona_boot_secondary,
@ -305,3 +338,8 @@ static const struct smp_operations nsp_smp_ops __initconst = {
.smp_boot_secondary = nsp_boot_secondary,
};
CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);
const struct smp_operations bcm2836_smp_ops __initconst = {
.smp_boot_secondary = bcm2836_boot_secondary,
};
CPU_METHOD_OF_DECLARE(bcm_smp_bcm2836, "brcm,bcm2836-smp", &bcm2836_smp_ops);

10
arch/arm/mach-bcm/platsmp.h Normal file
View File

@ -0,0 +1,10 @@
/*
* Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
*/
extern const struct smp_operations bcm2836_smp_ops;

54
arch/arm/mach-ep93xx/simone.c
View File

@ -42,60 +42,12 @@ static struct ep93xxfb_mach_info __initdata simone_fb_info = {
.flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
};
/*
* GPIO lines used for MMC card detection.
*/
#define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0
/*
* MMC card detection GPIO setup.
*/
static int simone_mmc_spi_init(struct device *dev,
irqreturn_t (*irq_handler)(int, void *), void *mmc)
{
unsigned int gpio = MMC_CARD_DETECT_GPIO;
int irq, err;
err = gpio_request(gpio, dev_name(dev));
if (err)
return err;
err = gpio_direction_input(gpio);
if (err)
goto fail;
irq = gpio_to_irq(gpio);
if (irq < 0)
goto fail;
err = request_irq(irq, irq_handler, IRQF_TRIGGER_FALLING,
"MMC card detect", mmc);
if (err)
goto fail;
printk(KERN_INFO "%s: using irq %d for MMC card detection\n",
dev_name(dev), irq);
return 0;
fail:
gpio_free(gpio);
return err;
}
static void simone_mmc_spi_exit(struct device *dev, void *mmc)
{
unsigned int gpio = MMC_CARD_DETECT_GPIO;
free_irq(gpio_to_irq(gpio), mmc);
gpio_free(gpio);
}
static struct mmc_spi_platform_data simone_mmc_spi_data = {
.init = simone_mmc_spi_init,
.exit = simone_mmc_spi_exit,
.detect_delay = 500,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.flags = MMC_SPI_USE_CD_GPIO,
.cd_gpio = EP93XX_GPIO_LINE_EGPIO0,
.cd_debounce = 1,
};
static struct spi_board_info simone_spi_devices[] __initdata = {

46
arch/arm/mach-ep93xx/ts72xx.c
View File

@ -18,7 +18,10 @@
#include <linux/io.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -186,24 +189,22 @@ static struct platform_device ts72xx_rtc_device = {
.num_resources = ARRAY_SIZE(ts72xx_rtc_resources),
};
/*************************************************************************
* Watchdog (in CPLD)
*************************************************************************/
#define TS72XX_WDT_CONTROL_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03800000)
#define TS72XX_WDT_FEED_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03c00000)
static struct resource ts72xx_wdt_resources[] = {
{
.start = TS72XX_WDT_CONTROL_PHYS_BASE,
.end = TS72XX_WDT_CONTROL_PHYS_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = TS72XX_WDT_FEED_PHYS_BASE,
.end = TS72XX_WDT_FEED_PHYS_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
DEFINE_RES_MEM(TS72XX_WDT_CONTROL_PHYS_BASE, 0x01),
DEFINE_RES_MEM(TS72XX_WDT_FEED_PHYS_BASE, 0x01),
};
static struct platform_device ts72xx_wdt_device = {
.name = "ts72xx-wdt",
.id = -1,
.num_resources = ARRAY_SIZE(ts72xx_wdt_resources),
.resource = ts72xx_wdt_resources,
.num_resources = ARRAY_SIZE(ts72xx_wdt_resources),
};
static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
@ -232,6 +233,27 @@ static struct platform_device ts73xx_fpga_device = {
#endif
/*************************************************************************
* SPI Bus
*************************************************************************/
static struct spi_board_info ts72xx_spi_devices[] __initdata = {
{
.modalias = "tmp122",
.max_speed_hz = 2 * 1000 * 1000,
.bus_num = 0,
.chip_select = 0,
},
};
static int ts72xx_spi_chipselects[] __initdata = {
EP93XX_GPIO_LINE_F(2), /* DIO_17 */
};
static struct ep93xx_spi_info ts72xx_spi_info __initdata = {
.chipselect = ts72xx_spi_chipselects,
.num_chipselect = ARRAY_SIZE(ts72xx_spi_chipselects),
};
static void __init ts72xx_init_machine(void)
{
ep93xx_init_devices();
@ -244,6 +266,8 @@ static void __init ts72xx_init_machine(void)
if (board_is_ts7300())
platform_device_register(&ts73xx_fpga_device);
#endif
ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices,
ARRAY_SIZE(ts72xx_spi_devices));
}
MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")

3
arch/arm/mach-ep93xx/ts72xx.h
View File

@ -39,9 +39,6 @@
#define TS72XX_OPTIONS2_TS9420 0x04
#define TS72XX_OPTIONS2_TS9420_BOOT 0x02
#define TS72XX_WDT_CONTROL_PHYS_BASE 0x23800000
#define TS72XX_WDT_FEED_PHYS_BASE 0x23c00000
#ifndef __ASSEMBLY__
static inline int ts72xx_model(void)

5
arch/arm/mach-exynos/Kconfig
View File

@ -85,11 +85,6 @@ config CPU_EXYNOS4210
default y
depends on ARCH_EXYNOS4
config SOC_EXYNOS4212
bool "SAMSUNG EXYNOS4212"
default y
depends on ARCH_EXYNOS4
config SOC_EXYNOS4412
bool "SAMSUNG EXYNOS4412"
default y

11
arch/arm/mach-exynos/common.h
View File

@ -18,7 +18,6 @@
#define EXYNOS3_SOC_MASK 0xFFFFF000
#define EXYNOS4210_CPU_ID 0x43210000
#define EXYNOS4212_CPU_ID 0x43220000
#define EXYNOS4412_CPU_ID 0xE4412200
#define EXYNOS4_CPU_MASK 0xFFFE0000
@ -39,7 +38,6 @@ static inline int is_samsung_##name(void) \
IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
@ -59,12 +57,6 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
# define soc_is_exynos4210() 0
#endif
#if defined(CONFIG_SOC_EXYNOS4212)
# define soc_is_exynos4212() is_samsung_exynos4212()
#else
# define soc_is_exynos4212() 0
#endif
#if defined(CONFIG_SOC_EXYNOS4412)
# define soc_is_exynos4412() is_samsung_exynos4412()
#else
@ -105,8 +97,7 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
# define soc_is_exynos5800() 0
#endif
#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \
soc_is_exynos4412())
#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4412())
#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \
soc_is_exynos5420() || soc_is_exynos5800())

2
arch/arm/mach-exynos/exynos.c
View File

@ -195,7 +195,6 @@ static void __init exynos_dt_machine_init(void)
exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
#endif
if (of_machine_is_compatible("samsung,exynos4210") ||
of_machine_is_compatible("samsung,exynos4212") ||
(of_machine_is_compatible("samsung,exynos4412") &&
of_machine_is_compatible("samsung,trats2")) ||
of_machine_is_compatible("samsung,exynos3250") ||
@ -208,7 +207,6 @@ static char const *const exynos_dt_compat[] __initconst = {
"samsung,exynos3250",
"samsung,exynos4",
"samsung,exynos4210",
"samsung,exynos4212",
"samsung,exynos4412",
"samsung,exynos5",
"samsung,exynos5250",

5
arch/arm/mach-exynos/firmware.c
View File

@ -70,12 +70,7 @@ static int exynos_cpu_boot(int cpu)
/*
* The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
* But, Exynos4212 has only one secondary CPU so second parameter
* isn't used for informing secure firmware about CPU id.
*/
if (soc_is_exynos4212())
cpu = 0;
exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
return 0;
}

3
arch/arm/mach-exynos/pm.c
View File

@ -167,8 +167,7 @@ void exynos_enter_aftr(void)
exynos_pm_central_suspend();
if (of_machine_is_compatible("samsung,exynos4212") ||
of_machine_is_compatible("samsung,exynos4412")) {
if (of_machine_is_compatible("samsung,exynos4412")) {
/* Setting SEQ_OPTION register */
pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
S5P_CENTRAL_SEQ_OPTION);

4
arch/arm/mach-exynos/suspend.c
View File

@ -225,7 +225,6 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu");
EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");
EXYNOS_PMU_IRQ(exynos4212_pmu_irq, "samsung,exynos4212-pmu");
EXYNOS_PMU_IRQ(exynos4412_pmu_irq, "samsung,exynos4412-pmu");
EXYNOS_PMU_IRQ(exynos5250_pmu_irq, "samsung,exynos5250-pmu");
EXYNOS_PMU_IRQ(exynos5420_pmu_irq, "samsung,exynos5420-pmu");
@ -616,9 +615,6 @@ static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = {
}, {
.compatible = "samsung,exynos4210-pmu",
.data = &exynos4_pm_data,
}, {
.compatible = "samsung,exynos4212-pmu",
.data = &exynos4_pm_data,
}, {
.compatible = "samsung,exynos4412-pmu",
.data = &exynos4_pm_data,

2
arch/arm/mach-imx/3ds_debugboard.c
View File

@ -20,7 +20,7 @@
#include <linux/smsc911x.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include "3ds_debugboard.h"
#include "hardware.h"
/* LAN9217 ethernet base address */

1
arch/arm/mach-imx/cpuidle-imx5.c
View File

@ -9,6 +9,7 @@
#include <linux/cpuidle.h>
#include <linux/module.h>
#include <asm/system_misc.h>
#include "cpuidle.h"
static int imx5_cpuidle_enter(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)

9
arch/arm/mach-imx/mach-imx6q.c
View File

@ -289,10 +289,13 @@ static void __init imx6q_init_machine(void)
static void __init imx6q_init_late(void)
{
/*
* WAIT mode is broken on TO 1.0 and 1.1, so there is no point
* to run cpuidle on them.
* WAIT mode is broken on imx6 Dual/Quad revision 1.0 and 1.1 so
* there is no point to run cpuidle on them.
*
* It does work on imx6 Solo/DualLite starting from 1.1
*/
if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1)
if ((cpu_is_imx6q() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) ||
(cpu_is_imx6dl() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_0))
imx6q_cpuidle_init();
if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))

2
arch/arm/mach-imx/mach-mx31lite.c
View File

@ -245,7 +245,7 @@ static struct map_desc mx31lite_io_desc[] __initdata = {
/*
* Set up static virtual mappings.
*/
void __init mx31lite_map_io(void)
static void __init mx31lite_map_io(void)
{
mx31_map_io();
iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));

1
arch/arm/mach-imx/mx31moboard-devboard.c
View File

@ -22,6 +22,7 @@
#include <linux/usb/otg.h>
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"

1
arch/arm/mach-imx/mx31moboard-marxbot.c
View File

@ -24,6 +24,7 @@
#include <linux/usb/otg.h>
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"

2
arch/arm/mach-integrator/Makefile
View File

@ -8,6 +8,4 @@
obj-y := core.o lm.o
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o
obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o
obj-$(CONFIG_PCI) += pci_v3.o
obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o

2
arch/arm/mach-integrator/integrator_ap.c
View File

@ -36,7 +36,6 @@
#include "hardware.h"
#include "cm.h"
#include "common.h"
#include "pci_v3.h"
#include "lm.h"
/* Regmap to the AP system controller */
@ -74,7 +73,6 @@ static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
static void __init ap_map_io(void)
{
iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
pci_v3_early_init();
}
#ifdef CONFIG_PM

900
arch/arm/mach-integrator/pci_v3.c
View File

@ -1,900 +0,0 @@
/*
* linux/arch/arm/mach-integrator/pci_v3.c
*
* PCI functions for V3 host PCI bridge
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000-2001 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_pci.h>
#include <video/vga.h>
#include <asm/mach/map.h>
#include <asm/signal.h>
#include <asm/mach/pci.h>
#include <asm/irq_regs.h>
#include "pci_v3.h"
#include "hardware.h"
/*
* Where in the memory map does PCI live?
*
* This represents a fairly liberal usage of address space. Even though
* the V3 only has two windows (therefore we need to map stuff on the fly),
* we maintain the same addresses, even if they're not mapped.
*/
#define PHYS_PCI_MEM_BASE 0x40000000 /* 256M */
#define PHYS_PCI_PRE_BASE 0x50000000 /* 256M */
#define PHYS_PCI_IO_BASE 0x60000000 /* 16M */
#define PHYS_PCI_CONFIG_BASE 0x61000000 /* 16M */
#define PHYS_PCI_V3_BASE 0x62000000 /* 64K */
#define PCI_MEMORY_VADDR IOMEM(0xe8000000)
#define PCI_CONFIG_VADDR IOMEM(0xec000000)
/*
* V3 Local Bus to PCI Bridge definitions
*
* Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04
* All V3 register names are prefaced by V3_ to avoid clashing with any other
* PCI definitions. Their names match the user's manual.
*
* I'm assuming that I20 is disabled.
*
*/
#define V3_PCI_VENDOR 0x00000000
#define V3_PCI_DEVICE 0x00000002
#define V3_PCI_CMD 0x00000004
#define V3_PCI_STAT 0x00000006
#define V3_PCI_CC_REV 0x00000008
#define V3_PCI_HDR_CFG 0x0000000C
#define V3_PCI_IO_BASE 0x00000010
#define V3_PCI_BASE0 0x00000014
#define V3_PCI_BASE1 0x00000018
#define V3_PCI_SUB_VENDOR 0x0000002C
#define V3_PCI_SUB_ID 0x0000002E
#define V3_PCI_ROM 0x00000030
#define V3_PCI_BPARAM 0x0000003C
#define V3_PCI_MAP0 0x00000040
#define V3_PCI_MAP1 0x00000044
#define V3_PCI_INT_STAT 0x00000048
#define V3_PCI_INT_CFG 0x0000004C
#define V3_LB_BASE0 0x00000054
#define V3_LB_BASE1 0x00000058
#define V3_LB_MAP0 0x0000005E
#define V3_LB_MAP1 0x00000062
#define V3_LB_BASE2 0x00000064
#define V3_LB_MAP2 0x00000066
#define V3_LB_SIZE 0x00000068
#define V3_LB_IO_BASE 0x0000006E
#define V3_FIFO_CFG 0x00000070
#define V3_FIFO_PRIORITY 0x00000072
#define V3_FIFO_STAT 0x00000074
#define V3_LB_ISTAT 0x00000076
#define V3_LB_IMASK 0x00000077
#define V3_SYSTEM 0x00000078
#define V3_LB_CFG 0x0000007A
#define V3_PCI_CFG 0x0000007C
#define V3_DMA_PCI_ADR0 0x00000080
#define V3_DMA_PCI_ADR1 0x00000090
#define V3_DMA_LOCAL_ADR0 0x00000084
#define V3_DMA_LOCAL_ADR1 0x00000094
#define V3_DMA_LENGTH0 0x00000088
#define V3_DMA_LENGTH1 0x00000098
#define V3_DMA_CSR0 0x0000008B
#define V3_DMA_CSR1 0x0000009B
#define V3_DMA_CTLB_ADR0 0x0000008C
#define V3_DMA_CTLB_ADR1 0x0000009C
#define V3_DMA_DELAY 0x000000E0
#define V3_MAIL_DATA 0x000000C0
#define V3_PCI_MAIL_IEWR 0x000000D0
#define V3_PCI_MAIL_IERD 0x000000D2
#define V3_LB_MAIL_IEWR 0x000000D4
#define V3_LB_MAIL_IERD 0x000000D6
#define V3_MAIL_WR_STAT 0x000000D8
#define V3_MAIL_RD_STAT 0x000000DA
#define V3_QBA_MAP 0x000000DC
/* PCI COMMAND REGISTER bits
*/
#define V3_COMMAND_M_FBB_EN (1 << 9)
#define V3_COMMAND_M_SERR_EN (1 << 8)
#define V3_COMMAND_M_PAR_EN (1 << 6)
#define V3_COMMAND_M_MASTER_EN (1 << 2)
#define V3_COMMAND_M_MEM_EN (1 << 1)
#define V3_COMMAND_M_IO_EN (1 << 0)
/* SYSTEM REGISTER bits
*/
#define V3_SYSTEM_M_RST_OUT (1 << 15)
#define V3_SYSTEM_M_LOCK (1 << 14)
/* PCI_CFG bits
*/
#define V3_PCI_CFG_M_I2O_EN (1 << 15)
#define V3_PCI_CFG_M_IO_REG_DIS (1 << 14)
#define V3_PCI_CFG_M_IO_DIS (1 << 13)
#define V3_PCI_CFG_M_EN3V (1 << 12)
#define V3_PCI_CFG_M_RETRY_EN (1 << 10)
#define V3_PCI_CFG_M_AD_LOW1 (1 << 9)
#define V3_PCI_CFG_M_AD_LOW0 (1 << 8)
/* PCI_BASE register bits (PCI -> Local Bus)
*/
#define V3_PCI_BASE_M_ADR_BASE 0xFFF00000
#define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00
#define V3_PCI_BASE_M_PREFETCH (1 << 3)
#define V3_PCI_BASE_M_TYPE (3 << 1)
#define V3_PCI_BASE_M_IO (1 << 0)
/* PCI MAP register bits (PCI -> Local bus)
*/
#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000
#define V3_PCI_MAP_M_RD_POST_INH (1 << 15)
#define V3_PCI_MAP_M_ROM_SIZE (3 << 10)
#define V3_PCI_MAP_M_SWAP (3 << 8)
#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0
#define V3_PCI_MAP_M_REG_EN (1 << 1)
#define V3_PCI_MAP_M_ENABLE (1 << 0)
/*
* LB_BASE0,1 register bits (Local bus -> PCI)
*/
#define V3_LB_BASE_ADR_BASE 0xfff00000
#define V3_LB_BASE_SWAP (3 << 8)
#define V3_LB_BASE_ADR_SIZE (15 << 4)
#define V3_LB_BASE_PREFETCH (1 << 3)
#define V3_LB_BASE_ENABLE (1 << 0)
#define V3_LB_BASE_ADR_SIZE_1MB (0 << 4)
#define V3_LB_BASE_ADR_SIZE_2MB (1 << 4)
#define V3_LB_BASE_ADR_SIZE_4MB (2 << 4)
#define V3_LB_BASE_ADR_SIZE_8MB (3 << 4)
#define V3_LB_BASE_ADR_SIZE_16MB (4 << 4)
#define V3_LB_BASE_ADR_SIZE_32MB (5 << 4)
#define V3_LB_BASE_ADR_SIZE_64MB (6 << 4)
#define V3_LB_BASE_ADR_SIZE_128MB (7 << 4)
#define V3_LB_BASE_ADR_SIZE_256MB (8 << 4)
#define V3_LB_BASE_ADR_SIZE_512MB (9 << 4)
#define V3_LB_BASE_ADR_SIZE_1GB (10 << 4)
#define V3_LB_BASE_ADR_SIZE_2GB (11 << 4)
#define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE)
/*
* LB_MAP0,1 register bits (Local bus -> PCI)
*/
#define V3_LB_MAP_MAP_ADR 0xfff0
#define V3_LB_MAP_TYPE (7 << 1)
#define V3_LB_MAP_AD_LOW_EN (1 << 0)
#define V3_LB_MAP_TYPE_IACK (0 << 1)
#define V3_LB_MAP_TYPE_IO (1 << 1)
#define V3_LB_MAP_TYPE_MEM (3 << 1)
#define V3_LB_MAP_TYPE_CONFIG (5 << 1)
#define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1)
#define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR)
/*
* LB_BASE2 register bits (Local bus -> PCI IO)
*/
#define V3_LB_BASE2_ADR_BASE 0xff00
#define V3_LB_BASE2_SWAP (3 << 6)
#define V3_LB_BASE2_ENABLE (1 << 0)
#define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE)
/*
* LB_MAP2 register bits (Local bus -> PCI IO)
*/
#define V3_LB_MAP2_MAP_ADR 0xff00
#define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR)
/*
* The V3 PCI interface chip in Integrator provides several windows from
* local bus memory into the PCI memory areas. Unfortunately, there
* are not really enough windows for our usage, therefore we reuse
* one of the windows for access to PCI configuration space. The
* memory map is as follows:
*
* Local Bus Memory Usage
*
* 40000000 - 4FFFFFFF PCI memory. 256M non-prefetchable
* 50000000 - 5FFFFFFF PCI memory. 256M prefetchable
* 60000000 - 60FFFFFF PCI IO. 16M
* 61000000 - 61FFFFFF PCI Configuration. 16M
*
* There are three V3 windows, each described by a pair of V3 registers.
* These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2.
* Base0 and Base1 can be used for any type of PCI memory access. Base2
* can be used either for PCI I/O or for I20 accesses. By default, uHAL
* uses this only for PCI IO space.
*
* Normally these spaces are mapped using the following base registers:
*
* Usage Local Bus Memory Base/Map registers used
*
* Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
* Mem 50000000 - 5FFFFFFF LB_BASE1/LB_MAP1
* IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
* Cfg 61000000 - 61FFFFFF
*
* This means that I20 and PCI configuration space accesses will fail.
* When PCI configuration accesses are needed (via the uHAL PCI
* configuration space primitives) we must remap the spaces as follows:
*
* Usage Local Bus Memory Base/Map registers used
*
* Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
* Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0
* IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
* Cfg 61000000 - 61FFFFFF LB_BASE1/LB_MAP1
*
* To make this work, the code depends on overlapping windows working.
* The V3 chip translates an address by checking its range within
* each of the BASE/MAP pairs in turn (in ascending register number
* order). It will use the first matching pair. So, for example,
* if the same address is mapped by both LB_BASE0/LB_MAP0 and
* LB_BASE1/LB_MAP1, the V3 will use the translation from
* LB_BASE0/LB_MAP0.
*
* To allow PCI Configuration space access, the code enlarges the
* window mapped by LB_BASE0/LB_MAP0 from 256M to 512M. This occludes
* the windows currently mapped by LB_BASE1/LB_MAP1 so that it can
* be remapped for use by configuration cycles.
*
* At the end of the PCI Configuration space accesses,
* LB_BASE1/LB_MAP1 is reset to map PCI Memory. Finally the window
* mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to
* reveal the now restored LB_BASE1/LB_MAP1 window.
*
* NOTE: We do not set up I2O mapping. I suspect that this is only
* for an intelligent (target) device. Using I2O disables most of
* the mappings into PCI memory.
*/
/* Filled in by probe */
static void __iomem *pci_v3_base;
/* CPU side memory ranges */
static struct resource conf_mem; /* FIXME: remap this instead of static map */
static struct resource io_mem;
static struct resource non_mem;
static struct resource pre_mem;
/* PCI side memory ranges */
static u64 non_mem_pci;
static u64 non_mem_pci_sz;
static u64 pre_mem_pci;
static u64 pre_mem_pci_sz;
// V3 access routines
#define v3_writeb(o,v) __raw_writeb(v, pci_v3_base + (unsigned int)(o))
#define v3_readb(o) (__raw_readb(pci_v3_base + (unsigned int)(o)))
#define v3_writew(o,v) __raw_writew(v, pci_v3_base + (unsigned int)(o))
#define v3_readw(o) (__raw_readw(pci_v3_base + (unsigned int)(o)))
#define v3_writel(o,v) __raw_writel(v, pci_v3_base + (unsigned int)(o))
#define v3_readl(o) (__raw_readl(pci_v3_base + (unsigned int)(o)))
/*============================================================================
*
* routine: uHALir_PCIMakeConfigAddress()
*
* parameters: bus = which bus
* device = which device
* function = which function
* offset = configuration space register we are interested in
*
* description: this routine will generate a platform dependent config
* address.
*
* calls: none
*
* returns: configuration address to play on the PCI bus
*
* To generate the appropriate PCI configuration cycles in the PCI
* configuration address space, you present the V3 with the following pattern
* (which is very nearly a type 1 (except that the lower two bits are 00 and
* not 01). In order for this mapping to work you need to set up one of
* the local to PCI aperatures to 16Mbytes in length translating to
* PCI configuration space starting at 0x0000.0000.
*
* PCI configuration cycles look like this:
*
* Type 0:
*
* 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* 31:11 Device select bit.
* 10:8 Function number
* 7:2 Register number
*
* Type 1:
*
* 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* 31:24 reserved
* 23:16 bus number (8 bits = 128 possible buses)
* 15:11 Device number (5 bits)
* 10:8 function number
* 7:2 register number
*
*/
#undef V3_LB_BASE_PREFETCH
#define V3_LB_BASE_PREFETCH 0
static void __iomem *v3_open_config_window(struct pci_bus *bus,
unsigned int devfn, int offset)
{
unsigned int address, mapaddress, busnr;
busnr = bus->number;
/*
* Trap out illegal values
*/
BUG_ON(offset > 255);
BUG_ON(busnr > 255);
BUG_ON(devfn > 255);
if (busnr == 0) {
int slot = PCI_SLOT(devfn);
/*
* local bus segment so need a type 0 config cycle
*
* build the PCI configuration "address" with one-hot in
* A31-A11
*
* mapaddress:
* 3:1 = config cycle (101)
* 0 = PCI A1 & A0 are 0 (0)
*/
address = PCI_FUNC(devfn) << 8;
mapaddress = V3_LB_MAP_TYPE_CONFIG;
if (slot > 12)
/*
* high order bits are handled by the MAP register
*/
mapaddress |= 1 << (slot - 5);
else
/*
* low order bits handled directly in the address
*/
address |= 1 << (slot + 11);
} else {
/*
* not the local bus segment so need a type 1 config cycle
*
* address:
* 23:16 = bus number
* 15:11 = slot number (7:3 of devfn)
* 10:8 = func number (2:0 of devfn)
*
* mapaddress:
* 3:1 = config cycle (101)
* 0 = PCI A1 & A0 from host bus (1)
*/
mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN;
address = (busnr << 16) | (devfn << 8);
}
/*
* Set up base0 to see all 512Mbytes of memory space (not
* prefetchable), this frees up base1 for re-use by
* configuration memory
*/
v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) |
V3_LB_BASE_ADR_SIZE_512MB | V3_LB_BASE_ENABLE);
/*
* Set up base1/map1 to point into configuration space.
*/
v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(conf_mem.start) |
V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE);
v3_writew(V3_LB_MAP1, mapaddress);
return PCI_CONFIG_VADDR + address + offset;
}
static void v3_close_config_window(void)
{
/*
* Reassign base1 for use by prefetchable PCI memory
*/
v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(pre_mem.start) |
V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
V3_LB_BASE_ENABLE);
v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(pre_mem_pci) |
V3_LB_MAP_TYPE_MEM_MULTIPLE);
/*
* And shrink base0 back to a 256M window (NOTE: MAP0 already correct)
*/
v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) |
V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
}
static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *val)
{
int ret = pci_generic_config_read(bus, devfn, where, size, val);
v3_close_config_window();
return ret;
}
static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 val)
{
int ret = pci_generic_config_write(bus, devfn, where, size, val);
v3_close_config_window();
return ret;
}
static struct pci_ops pci_v3_ops = {
.map_bus = v3_open_config_window,
.read = v3_read_config,
.write = v3_write_config,
};
static int __init pci_v3_setup_resources(struct pci_sys_data *sys)
{
if (request_resource(&iomem_resource, &non_mem)) {
printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
"memory region\n");
return -EBUSY;
}
if (request_resource(&iomem_resource, &pre_mem)) {
release_resource(&non_mem);
printk(KERN_ERR "PCI: unable to allocate prefetchable "
"memory region\n");
return -EBUSY;
}
/*
* the mem resource for this bus
* the prefetch mem resource for this bus
*/
pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
return 1;
}
/*
* These don't seem to be implemented on the Integrator I have, which
* means I can't get additional information on the reason for the pm2fb
* problems. I suppose I'll just have to mind-meld with the machine. ;)
*/
static void __iomem *ap_syscon_base;
#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18
#define INTEGRATOR_SC_LBFADDR_OFFSET 0x20
#define INTEGRATOR_SC_LBFCODE_OFFSET 0x24
static int
v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
unsigned long pc = instruction_pointer(regs);
unsigned long instr = *(unsigned long *)pc;
#if 0
char buf[128];
sprintf(buf, "V3 fault: addr 0x%08lx, FSR 0x%03x, PC 0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n",
addr, fsr, pc, instr, __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255,
v3_readb(V3_LB_ISTAT));
printk(KERN_DEBUG "%s", buf);
#endif
v3_writeb(V3_LB_ISTAT, 0);
__raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
/*
* If the instruction being executed was a read,
* make it look like it read all-ones.
*/
if ((instr & 0x0c100000) == 0x04100000) {
int reg = (instr >> 12) & 15;
unsigned long val;
if (instr & 0x00400000)
val = 255;
else
val = -1;
regs->uregs[reg] = val;
regs->ARM_pc += 4;
return 0;
}
if ((instr & 0x0e100090) == 0x00100090) {
int reg = (instr >> 12) & 15;
regs->uregs[reg] = -1;
regs->ARM_pc += 4;
return 0;
}
return 1;
}
static irqreturn_t v3_irq(int irq, void *devid)
{
#ifdef CONFIG_DEBUG_LL
struct pt_regs *regs = get_irq_regs();
unsigned long pc = instruction_pointer(regs);
unsigned long instr = *(unsigned long *)pc;
char buf[128];
extern void printascii(const char *);
sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
"ISTAT=%02x\n", irq, pc, instr,
__raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET),
__raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255,
v3_readb(V3_LB_ISTAT));
printascii(buf);
#endif
v3_writew(V3_PCI_STAT, 0xf000);
v3_writeb(V3_LB_ISTAT, 0);
__raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
#ifdef CONFIG_DEBUG_LL
/*
* If the instruction being executed was a read,
* make it look like it read all-ones.
*/
if ((instr & 0x0c100000) == 0x04100000) {
int reg = (instr >> 16) & 15;
sprintf(buf, " reg%d = %08lx\n", reg, regs->uregs[reg]);
printascii(buf);
}
#endif
return IRQ_HANDLED;
}
static int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
{
int ret = 0;
if (!ap_syscon_base)
return -EINVAL;
if (nr == 0) {
sys->mem_offset = non_mem.start;
ret = pci_v3_setup_resources(sys);
}
return ret;
}
/*
* V3_LB_BASE? - local bus address
* V3_LB_MAP? - pci bus address
*/
static void __init pci_v3_preinit(void)
{
unsigned int temp;
phys_addr_t io_address = pci_pio_to_address(io_mem.start);
pcibios_min_mem = 0x00100000;
/*
* Hook in our fault handler for PCI errors
*/
hook_fault_code(4, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
hook_fault_code(6, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
/*
* Unlock V3 registers, but only if they were previously locked.
*/
if (v3_readw(V3_SYSTEM) & V3_SYSTEM_M_LOCK)
v3_writew(V3_SYSTEM, 0xa05f);
/*
* Setup window 0 - PCI non-prefetchable memory
* Local: 0x40000000 Bus: 0x00000000 Size: 256MB
*/
v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) |
V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
v3_writew(V3_LB_MAP0, v3_addr_to_lb_map(non_mem_pci) |
V3_LB_MAP_TYPE_MEM);
/*
* Setup window 1 - PCI prefetchable memory
* Local: 0x50000000 Bus: 0x10000000 Size: 256MB
*/
v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(pre_mem.start) |
V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
V3_LB_BASE_ENABLE);
v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(pre_mem_pci) |
V3_LB_MAP_TYPE_MEM_MULTIPLE);
/*
* Setup window 2 - PCI IO
*/
v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_address) |
V3_LB_BASE_ENABLE);
v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0));
/*
* Disable PCI to host IO cycles
*/
temp = v3_readw(V3_PCI_CFG) & ~V3_PCI_CFG_M_I2O_EN;
temp |= V3_PCI_CFG_M_IO_REG_DIS | V3_PCI_CFG_M_IO_DIS;
v3_writew(V3_PCI_CFG, temp);
printk(KERN_DEBUG "FIFO_CFG: %04x FIFO_PRIO: %04x\n",
v3_readw(V3_FIFO_CFG), v3_readw(V3_FIFO_PRIORITY));
/*
* Set the V3 FIFO such that writes have higher priority than
* reads, and local bus write causes local bus read fifo flush.
* Same for PCI.
*/
v3_writew(V3_FIFO_PRIORITY, 0x0a0a);
/*
* Re-lock the system register.
*/
temp = v3_readw(V3_SYSTEM) | V3_SYSTEM_M_LOCK;
v3_writew(V3_SYSTEM, temp);
/*
* Clear any error conditions, and enable write errors.
*/
v3_writeb(V3_LB_ISTAT, 0);
v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10));
v3_writeb(V3_LB_IMASK, 0x28);
__raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
}
static void __init pci_v3_postinit(void)
{
unsigned int pci_cmd;
phys_addr_t io_address = pci_pio_to_address(io_mem.start);
pci_cmd = PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
v3_writew(V3_PCI_CMD, pci_cmd);
v3_writeb(V3_LB_ISTAT, ~0x40);
v3_writeb(V3_LB_IMASK, 0x68);
#if 0
ret = request_irq(IRQ_AP_LBUSTIMEOUT, lb_timeout, 0, "bus timeout", NULL);
if (ret)
printk(KERN_ERR "PCI: unable to grab local bus timeout "
"interrupt: %d\n", ret);
#endif
register_isa_ports(non_mem.start, io_address, 0);
}
/*
* A small note about bridges and interrupts. The DECchip 21050 (and
* later) adheres to the PCI-PCI bridge specification. This says that
* the interrupts on the other side of a bridge are swizzled in the
* following manner:
*
* Dev Interrupt Interrupt
* Pin on Pin on
* Device Connector
*
* 4 A A
* B B
* C C
* D D
*
* 5 A B
* B C
* C D
* D A
*
* 6 A C
* B D
* C A
* D B
*
* 7 A D
* B A
* C B
* D C
*
* Where A = pin 1, B = pin 2 and so on and pin=0 = default = A.
* Thus, each swizzle is ((pin-1) + (device#-4)) % 4
*/
/*
* This routine handles multiple bridges.
*/
static u8 __init pci_v3_swizzle(struct pci_dev *dev, u8 *pinp)
{
if (*pinp == 0)
*pinp = 1;
return pci_common_swizzle(dev, pinp);
}
static struct hw_pci pci_v3 __initdata = {
.swizzle = pci_v3_swizzle,
.setup = pci_v3_setup,
.nr_controllers = 1,
.ops = &pci_v3_ops,
.preinit = pci_v3_preinit,
.postinit = pci_v3_postinit,
};
static int __init pci_v3_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct of_pci_range_parser parser;
struct of_pci_range range;
struct resource *res;
int irq, ret;
/* Remap the Integrator system controller */
ap_syscon_base = devm_ioremap(&pdev->dev, INTEGRATOR_SC_BASE, 0x100);
if (!ap_syscon_base) {
dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n");
return -ENODEV;
}
/* Device tree probe path */
if (!np) {
dev_err(&pdev->dev, "no device tree node for PCIv3\n");
return -ENODEV;
}
if (of_pci_range_parser_init(&parser, np))
return -EINVAL;
/* Get base for bridge registers */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "unable to obtain PCIv3 base\n");
return -ENODEV;
}
pci_v3_base = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
if (!pci_v3_base) {
dev_err(&pdev->dev, "unable to remap PCIv3 base\n");
return -ENODEV;
}
/* Get and request error IRQ resource */
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(&pdev->dev, "unable to obtain PCIv3 error IRQ\n");
return -ENODEV;
}
ret = devm_request_irq(&pdev->dev, irq, v3_irq, 0,
"PCIv3 error", NULL);
if (ret < 0) {
dev_err(&pdev->dev, "unable to request PCIv3 error IRQ %d (%d)\n", irq, ret);
return ret;
}
for_each_of_pci_range(&parser, &range) {
if (!range.flags) {
ret = of_pci_range_to_resource(&range, np, &conf_mem);
conf_mem.name = "PCIv3 config";
}
if (range.flags & IORESOURCE_IO) {
ret = of_pci_range_to_resource(&range, np, &io_mem);
io_mem.name = "PCIv3 I/O";
}
if ((range.flags & IORESOURCE_MEM) &&
!(range.flags & IORESOURCE_PREFETCH)) {
non_mem_pci = range.pci_addr;
non_mem_pci_sz = range.size;
ret = of_pci_range_to_resource(&range, np, &non_mem);
non_mem.name = "PCIv3 non-prefetched mem";
}
if ((range.flags & IORESOURCE_MEM) &&
(range.flags & IORESOURCE_PREFETCH)) {
pre_mem_pci = range.pci_addr;
pre_mem_pci_sz = range.size;
ret = of_pci_range_to_resource(&range, np, &pre_mem);
pre_mem.name = "PCIv3 prefetched mem";
}
if (ret < 0) {
dev_err(&pdev->dev, "missing ranges in device node\n");
return ret;
}
}
pci_v3.map_irq = of_irq_parse_and_map_pci;
pci_common_init_dev(&pdev->dev, &pci_v3);
return 0;
}
static const struct of_device_id pci_ids[] = {
{ .compatible = "v3,v360epc-pci", },
{},
};
static struct platform_driver pci_v3_driver = {
.driver = {
.name = "pci-v3",
.of_match_table = pci_ids,
},
};
static int __init pci_v3_init(void)
{
return platform_driver_probe(&pci_v3_driver, pci_v3_probe);
}
subsys_initcall(pci_v3_init);
/*
* Static mappings for the PCIv3 bridge
*
* e8000000 40000000 PCI memory PHYS_PCI_MEM_BASE (max 512M)
* ec000000 61000000 PCI config space PHYS_PCI_CONFIG_BASE (max 16M)
* fee00000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M)
*/
static struct map_desc pci_v3_io_desc[] __initdata __maybe_unused = {
{
.virtual = (unsigned long)PCI_MEMORY_VADDR,
.pfn = __phys_to_pfn(PHYS_PCI_MEM_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}, {
.virtual = (unsigned long)PCI_CONFIG_VADDR,
.pfn = __phys_to_pfn(PHYS_PCI_CONFIG_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}
};
int __init pci_v3_early_init(void)
{
iotable_init(pci_v3_io_desc, ARRAY_SIZE(pci_v3_io_desc));
vga_base = (unsigned long)PCI_MEMORY_VADDR;
pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE));
return 0;
}

10
arch/arm/mach-integrator/pci_v3.h
View File

@ -1,10 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/* Simple oneliner include to the PCIv3 early init */
#ifdef CONFIG_PCI
extern int pci_v3_early_init(void);
#else
static inline int pci_v3_early_init(void)
{
return 0;
}
#endif

2
arch/arm/mach-meson/Kconfig
View File

@ -9,6 +9,7 @@ menuconfig ARCH_MESON
select PINCTRL_MESON
select COMMON_CLK
select COMMON_CLK_AMLOGIC
select HAVE_ARM_SCU if SMP
if ARCH_MESON
@ -28,5 +29,6 @@ config MACH_MESON8B
default ARCH_MESON
select MESON6_TIMER
select COMMON_CLK_MESON8B
select MESON_IRQ_GPIO
endif

1
arch/arm/mach-meson/Makefile
View File

@ -1 +1,2 @@
obj-$(CONFIG_ARCH_MESON) += meson.o
obj-$(CONFIG_SMP) += platsmp.o

440
arch/arm/mach-meson/platsmp.c Normal file
View File

@ -0,0 +1,440 @@
/*
* Copyright (C) 2015 Carlo Caione <carlo@endlessm.com>
* Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*/
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/smp.h>
#include <linux/mfd/syscon.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
#include <asm/smp_scu.h>
#include <asm/smp_plat.h>
#define MESON_SMP_SRAM_CPU_CTRL_REG (0x00)
#define MESON_SMP_SRAM_CPU_CTRL_ADDR_REG(c) (0x04 + ((c - 1) << 2))
#define MESON_CPU_AO_RTI_PWR_A9_CNTL0 (0x00)
#define MESON_CPU_AO_RTI_PWR_A9_CNTL1 (0x04)
#define MESON_CPU_AO_RTI_PWR_A9_MEM_PD0 (0x14)
#define MESON_CPU_PWR_A9_CNTL0_M(c) (0x03 << ((c * 2) + 16))
#define MESON_CPU_PWR_A9_CNTL1_M(c) (0x03 << ((c + 1) << 1))
#define MESON_CPU_PWR_A9_MEM_PD0_M(c) (0x0f << (32 - (c * 4)))
#define MESON_CPU_PWR_A9_CNTL1_ST(c) (0x01 << (c + 16))
static void __iomem *sram_base;
static void __iomem *scu_base;
static struct regmap *pmu;
static struct reset_control *meson_smp_get_core_reset(int cpu)
{
struct device_node *np = of_get_cpu_node(cpu, 0);
return of_reset_control_get_exclusive(np, NULL);
}
static void meson_smp_set_cpu_ctrl(int cpu, bool on_off)
{
u32 val = readl(sram_base + MESON_SMP_SRAM_CPU_CTRL_REG);
if (on_off)
val |= BIT(cpu);
else
val &= ~BIT(cpu);
/* keep bit 0 always enabled */
val |= BIT(0);
writel(val, sram_base + MESON_SMP_SRAM_CPU_CTRL_REG);
}
static void __init meson_smp_prepare_cpus(const char *scu_compatible,
const char *pmu_compatible,
const char *sram_compatible)
{
static struct device_node *node;
/* SMP SRAM */
node = of_find_compatible_node(NULL, NULL, sram_compatible);
if (!node) {
pr_err("Missing SRAM node\n");
return;
}
sram_base = of_iomap(node, 0);
if (!sram_base) {
pr_err("Couldn't map SRAM registers\n");
return;
}
/* PMU */
pmu = syscon_regmap_lookup_by_compatible(pmu_compatible);
if (IS_ERR(pmu)) {
pr_err("Couldn't map PMU registers\n");
return;
}
/* SCU */
node = of_find_compatible_node(NULL, NULL, scu_compatible);
if (!node) {
pr_err("Missing SCU node\n");
return;
}
scu_base = of_iomap(node, 0);
if (!scu_base) {
pr_err("Couln't map SCU registers\n");
return;
}
scu_enable(scu_base);
}
static void __init meson8b_smp_prepare_cpus(unsigned int max_cpus)
{
meson_smp_prepare_cpus("arm,cortex-a5-scu", "amlogic,meson8b-pmu",
"amlogic,meson8b-smp-sram");
}
static void __init meson8_smp_prepare_cpus(unsigned int max_cpus)
{
meson_smp_prepare_cpus("arm,cortex-a9-scu", "amlogic,meson8-pmu",
"amlogic,meson8-smp-sram");
}
static void meson_smp_begin_secondary_boot(unsigned int cpu)
{
/*
* Set the entry point before powering on the CPU through the SCU. This
* is needed if the CPU is in "warm" state (= after rebooting the
* system without power-cycling, or when taking the CPU offline and
* then taking it online again.
*/
writel(__pa_symbol(secondary_startup),
sram_base + MESON_SMP_SRAM_CPU_CTRL_ADDR_REG(cpu));
/*
* SCU Power on CPU (needs to be done before starting the CPU,
* otherwise the secondary CPU will not start).
*/
scu_cpu_power_enable(scu_base, cpu);
}
static int meson_smp_finalize_secondary_boot(unsigned int cpu)
{
unsigned long timeout;
timeout = jiffies + (10 * HZ);
while (readl(sram_base + MESON_SMP_SRAM_CPU_CTRL_ADDR_REG(cpu))) {
if (!time_before(jiffies, timeout)) {
pr_err("Timeout while waiting for CPU%d status\n",
cpu);
return -ETIMEDOUT;
}
}
writel(__pa_symbol(secondary_startup),
sram_base + MESON_SMP_SRAM_CPU_CTRL_ADDR_REG(cpu));
meson_smp_set_cpu_ctrl(cpu, true);
return 0;
}
static int meson8_smp_boot_secondary(unsigned int cpu,
struct task_struct *idle)
{
struct reset_control *rstc;
int ret;
rstc = meson_smp_get_core_reset(cpu);
if (IS_ERR(rstc)) {
pr_err("Couldn't get the reset controller for CPU%d\n", cpu);
return PTR_ERR(rstc);
}
meson_smp_begin_secondary_boot(cpu);
/* Reset enable */
ret = reset_control_assert(rstc);
if (ret) {
pr_err("Failed to assert CPU%d reset\n", cpu);
goto out;
}
/* CPU power ON */
ret = regmap_update_bits(pmu, MESON_CPU_AO_RTI_PWR_A9_CNTL1,
MESON_CPU_PWR_A9_CNTL1_M(cpu), 0);
if (ret < 0) {
pr_err("Couldn't wake up CPU%d\n", cpu);
goto out;
}
udelay(10);
/* Isolation disable */
ret = regmap_update_bits(pmu, MESON_CPU_AO_RTI_PWR_A9_CNTL0, BIT(cpu),
0);
if (ret < 0) {
pr_err("Error when disabling isolation of CPU%d\n", cpu);
goto out;
}
/* Reset disable */
ret = reset_control_deassert(rstc);
if (ret) {
pr_err("Failed to de-assert CPU%d reset\n", cpu);
goto out;
}
ret = meson_smp_finalize_secondary_boot(cpu);
if (ret)
goto out;
out:
reset_control_put(rstc);
return 0;
}
static int meson8b_smp_boot_secondary(unsigned int cpu,
struct task_struct *idle)
{
struct reset_control *rstc;
int ret;
u32 val;
rstc = meson_smp_get_core_reset(cpu);
if (IS_ERR(rstc)) {
pr_err("Couldn't get the reset controller for CPU%d\n", cpu);
return PTR_ERR(rstc);
}
meson_smp_begin_secondary_boot(cpu);
/* CPU power UP */
ret = regmap_update_bits(pmu, MESON_CPU_AO_RTI_PWR_A9_CNTL0,
MESON_CPU_PWR_A9_CNTL0_M(cpu), 0);
if (ret < 0) {
pr_err("Couldn't power up CPU%d\n", cpu);
goto out;
}
udelay(5);
/* Reset enable */
ret = reset_control_assert(rstc);
if (ret) {
pr_err("Failed to assert CPU%d reset\n", cpu);
goto out;
}
/* Memory power UP */
ret = regmap_update_bits(pmu, MESON_CPU_AO_RTI_PWR_A9_MEM_PD0,
MESON_CPU_PWR_A9_MEM_PD0_M(cpu), 0);
if (ret < 0) {
pr_err("Couldn't power up the memory for CPU%d\n", cpu);
goto out;
}
/* Wake up CPU */
ret = regmap_update_bits(pmu, MESON_CPU_AO_RTI_PWR_A9_CNTL1,
MESON_CPU_PWR_A9_CNTL1_M(cpu), 0);
if (ret < 0) {
pr_err("Couldn't wake up CPU%d\n", cpu);
goto out;
}
udelay(10);
ret = regmap_read_poll_timeout(pmu, MESON_CPU_AO_RTI_PWR_A9_CNTL1, val,
val & MESON_CPU_PWR_A9_CNTL1_ST(cpu),
10, 10000);
if (ret) {
pr_err("Timeout while polling PMU for CPU%d status\n", cpu);
goto out;
}
/* Isolation disable */
ret = regmap_update_bits(pmu, MESON_CPU_AO_RTI_PWR_A9_CNTL0, BIT(cpu),
0);
if (ret < 0) {
pr_err("Error when disabling isolation of CPU%d\n", cpu);
goto out;
}
/* Reset disable */
ret = reset_control_deassert(rstc);
if (ret) {
pr_err("Failed to de-assert CPU%d reset\n", cpu);
goto out;
}
ret = meson_smp_finalize_secondary_boot(cpu);
if (ret)
goto out;
out:
reset_control_put(rstc);
return 0;
}
#ifdef CONFIG_HOTPLUG_CPU
static void meson8_smp_cpu_die(unsigned int cpu)
{
meson_smp_set_cpu_ctrl(cpu, false);
v7_exit_coherency_flush(louis);
scu_power_mode(scu_base, SCU_PM_POWEROFF);
dsb();
wfi();
/* we should never get here */
WARN_ON(1);
}
static int meson8_smp_cpu_kill(unsigned int cpu)
{
int ret, power_mode;
unsigned long timeout;
timeout = jiffies + (50 * HZ);
do {
power_mode = scu_get_cpu_power_mode(scu_base, cpu);
if (power_mode == SCU_PM_POWEROFF)
break;
usleep_range(10000, 15000);
} while (time_before(jiffies, timeout));
if (power_mode != SCU_PM_POWEROFF) {
pr_err("Error while waiting for SCU power-off on CPU%d\n",
cpu);
return -ETIMEDOUT;
}
msleep(30);
/* Isolation enable */
ret = regmap_update_bits(pmu, MESON_CPU_AO_RTI_PWR_A9_CNTL0, BIT(cpu),
0x3);
if (ret < 0) {
pr_err("Error when enabling isolation for CPU%d\n", cpu);
return ret;
}
udelay(10);
/* CPU power OFF */
ret = regmap_update_bits(pmu, MESON_CPU_AO_RTI_PWR_A9_CNTL1,
MESON_CPU_PWR_A9_CNTL1_M(cpu), 0x3);
if (ret < 0) {
pr_err("Couldn't change sleep status of CPU%d\n", cpu);
return ret;
}
return 1;
}
static int meson8b_smp_cpu_kill(unsigned int cpu)
{
int ret, power_mode, count = 5000;
do {
power_mode = scu_get_cpu_power_mode(scu_base, cpu);
if (power_mode == SCU_PM_POWEROFF)
break;
udelay(10);
} while (++count);
if (power_mode != SCU_PM_POWEROFF) {
pr_err("Error while waiting for SCU power-off on CPU%d\n",
cpu);
return -ETIMEDOUT;
}
udelay(10);
/* CPU power DOWN */
ret = regmap_update_bits(pmu, MESON_CPU_AO_RTI_PWR_A9_CNTL0,
MESON_CPU_PWR_A9_CNTL0_M(cpu), 0x3);
if (ret < 0) {
pr_err("Couldn't power down CPU%d\n", cpu);
return ret;
}
/* Isolation enable */
ret = regmap_update_bits(pmu, MESON_CPU_AO_RTI_PWR_A9_CNTL0, BIT(cpu),
0x3);
if (ret < 0) {
pr_err("Error when enabling isolation for CPU%d\n", cpu);
return ret;
}
udelay(10);
/* Sleep status */
ret = regmap_update_bits(pmu, MESON_CPU_AO_RTI_PWR_A9_CNTL1,
MESON_CPU_PWR_A9_CNTL1_M(cpu), 0x3);
if (ret < 0) {
pr_err("Couldn't change sleep status of CPU%d\n", cpu);
return ret;
}
/* Memory power DOWN */
ret = regmap_update_bits(pmu, MESON_CPU_AO_RTI_PWR_A9_MEM_PD0,
MESON_CPU_PWR_A9_MEM_PD0_M(cpu), 0xf);
if (ret < 0) {
pr_err("Couldn't power down the memory of CPU%d\n", cpu);
return ret;
}
return 1;
}
#endif
static struct smp_operations meson8_smp_ops __initdata = {
.smp_prepare_cpus = meson8_smp_prepare_cpus,
.smp_boot_secondary = meson8_smp_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = meson8_smp_cpu_die,
.cpu_kill = meson8_smp_cpu_kill,
#endif
};
static struct smp_operations meson8b_smp_ops __initdata = {
.smp_prepare_cpus = meson8b_smp_prepare_cpus,
.smp_boot_secondary = meson8b_smp_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = meson8_smp_cpu_die,
.cpu_kill = meson8b_smp_cpu_kill,
#endif
};
CPU_METHOD_OF_DECLARE(meson8_smp, "amlogic,meson8-smp", &meson8_smp_ops);
CPU_METHOD_OF_DECLARE(meson8b_smp, "amlogic,meson8b-smp", &meson8b_smp_ops);

2
arch/arm/mach-mxs/pm.c
View File

@ -30,7 +30,7 @@ static int mxs_suspend_enter(suspend_state_t state)
return 0;
}
static struct platform_suspend_ops mxs_suspend_ops = {
static const struct platform_suspend_ops mxs_suspend_ops = {
.enter = mxs_suspend_enter,
.valid = suspend_valid_only_mem,
};

2
arch/arm/mach-omap1/board-ams-delta.c
View File

@ -156,7 +156,7 @@ static struct map_desc ams_delta_io_desc[] __initdata = {
}
};
static struct omap_lcd_config ams_delta_lcd_config __initdata = {
static const struct omap_lcd_config ams_delta_lcd_config __initconst = {
.ctrl_name = "internal",
};

2
arch/arm/mach-omap1/board-fsample.c
View File

@ -266,7 +266,7 @@ static struct platform_device *devices[] __initdata = {
&kp_device,
};
static struct omap_lcd_config fsample_lcd_config = {
static const struct omap_lcd_config fsample_lcd_config = {
.ctrl_name = "internal",
};

2
arch/arm/mach-omap1/board-h2.c
View File

@ -357,7 +357,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
.pins[1] = 3,
};
static struct omap_lcd_config h2_lcd_config __initdata = {
static const struct omap_lcd_config h2_lcd_config __initconst = {
.ctrl_name = "internal",
};

2
arch/arm/mach-omap1/board-h3.c
View File

@ -376,7 +376,7 @@ static struct omap_usb_config h3_usb_config __initdata = {
.pins[1] = 3,
};
static struct omap_lcd_config h3_lcd_config __initdata = {
static const struct omap_lcd_config h3_lcd_config __initconst = {
.ctrl_name = "internal",
};

2
arch/arm/mach-omap1/board-htcherald.c
View File

@ -391,7 +391,7 @@ static struct omap_usb_config htcherald_usb_config __initdata = {
};
/* LCD Device resources */
static struct omap_lcd_config htcherald_lcd_config __initdata = {
static const struct omap_lcd_config htcherald_lcd_config __initconst = {
.ctrl_name = "internal",
};

4
arch/arm/mach-omap1/board-innovator.c
View File

@ -302,7 +302,7 @@ static struct omap_usb_config innovator1510_usb_config __initdata = {
.pins[0] = 2,
};
static struct omap_lcd_config innovator1510_lcd_config __initdata = {
static const struct omap_lcd_config innovator1510_lcd_config __initconst = {
.ctrl_name = "internal",
};
#endif
@ -323,7 +323,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
.pins[1] = 3,
};
static struct omap_lcd_config innovator1610_lcd_config __initdata = {
static const struct omap_lcd_config innovator1610_lcd_config __initconst = {
.ctrl_name = "internal",
};
#endif

2
arch/arm/mach-omap1/board-nokia770.c
View File

@ -103,7 +103,7 @@ static struct mipid_platform_data nokia770_mipid_platform_data = {
.shutdown = mipid_shutdown,
};
static struct omap_lcd_config nokia770_lcd_config __initdata = {
static const struct omap_lcd_config nokia770_lcd_config __initconst = {
.ctrl_name = "hwa742",
};

2
arch/arm/mach-omap1/board-osk.c
View File

@ -295,7 +295,7 @@ static struct omap_usb_config osk_usb_config __initdata = {
};
#ifdef CONFIG_OMAP_OSK_MISTRAL
static struct omap_lcd_config osk_lcd_config __initdata = {
static const struct omap_lcd_config osk_lcd_config __initconst = {
.ctrl_name = "internal",
};
#endif

2
arch/arm/mach-omap1/board-palmte.c
View File

@ -178,7 +178,7 @@ static struct omap_usb_config palmte_usb_config __initdata = {
.pins[0] = 2,
};
static struct omap_lcd_config palmte_lcd_config __initdata = {
static const struct omap_lcd_config palmte_lcd_config __initconst = {
.ctrl_name = "internal",
};

2
arch/arm/mach-omap1/board-palmtt.c
View File

@ -241,7 +241,7 @@ static struct omap_usb_config palmtt_usb_config __initdata = {
.pins[0] = 2,
};
static struct omap_lcd_config palmtt_lcd_config __initdata = {
static const struct omap_lcd_config palmtt_lcd_config __initconst = {
.ctrl_name = "internal",
};

2
arch/arm/mach-omap1/board-palmz71.c
View File

@ -206,7 +206,7 @@ static struct omap_usb_config palmz71_usb_config __initdata = {
.pins[0] = 2,
};
static struct omap_lcd_config palmz71_lcd_config __initdata = {
static const struct omap_lcd_config palmz71_lcd_config __initconst = {
.ctrl_name = "internal",
};

2
arch/arm/mach-omap1/board-perseus2.c
View File

@ -225,7 +225,7 @@ static struct platform_device *devices[] __initdata = {
&kp_device,
};
static struct omap_lcd_config perseus2_lcd_config __initdata = {
static const struct omap_lcd_config perseus2_lcd_config __initconst = {
.ctrl_name = "internal",
};

2
arch/arm/mach-omap1/board-sx1.c
View File

@ -297,7 +297,7 @@ static struct omap_usb_config sx1_usb_config __initdata = {
/*----------- LCD -------------------------*/
static struct omap_lcd_config sx1_lcd_config __initdata = {
static const struct omap_lcd_config sx1_lcd_config __initconst = {
.ctrl_name = "internal",
};

1
arch/arm/mach-omap2/Kconfig
View File

@ -104,6 +104,7 @@ config ARCH_OMAP2PLUS
select OMAP_GPMC
select PINCTRL
select SOC_BUS
select TI_SYSC
select OMAP_IRQCHIP
select CLKSRC_TI_32K
help

3
arch/arm/mach-omap2/Makefile
View File

@ -199,15 +199,12 @@ obj-y += omap_hwmod_common_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_interconnect_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_interconnect_data.o
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_3xxx_interconnect_data.o
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_interconnect_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_data.o
obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_43xx_interconnect_data.o

1
arch/arm/mach-omap2/common.h
View File

@ -225,7 +225,6 @@ extern struct device *omap2_get_iva_device(void);
extern struct device *omap2_get_l3_device(void);
extern struct device *omap4_get_dsp_device(void);
unsigned int omap4_xlate_irq(unsigned int hwirq);
void omap_gic_of_init(void);
#ifdef CONFIG_CACHE_L2X0

2
arch/arm/mach-omap2/dma.c
View File

@ -223,7 +223,7 @@ static struct omap_system_dma_plat_info dma_plat_info __initdata = {
.dma_read = dma_read,
};
static struct platform_device_info omap_dma_dev_info = {
static struct platform_device_info omap_dma_dev_info __initdata = {
.name = "omap-dma-engine",
.id = -1,
.dma_mask = DMA_BIT_MASK(32),

22
arch/arm/mach-omap2/hdq1w.c
View File

@ -75,25 +75,3 @@ int omap_hdq1w_reset(struct omap_hwmod *oh)
return 0;
}
#ifndef CONFIG_OF
static int __init omap_init_hdq(void)
{
int id = -1;
struct platform_device *pdev;
struct omap_hwmod *oh;
char *oh_name = "hdq1w";
char *devname = "omap_hdq";
oh = omap_hwmod_lookup(oh_name);
if (!oh)
return 0;
pdev = omap_device_build(devname, id, oh, NULL, 0);
WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
devname, oh->name);
return 0;
}
omap_arch_initcall(omap_init_hdq);
#endif

5
arch/arm/mach-omap2/id.c
View File

@ -693,9 +693,12 @@ void __init dra7xxx_check_revision(void)
omap_revision = DRA722_REV_ES1_0;
break;
case 1:
default:
omap_revision = DRA722_REV_ES2_0;
break;
case 2:
default:
omap_revision = DRA722_REV_ES2_1;
break;
}
break;

24
arch/arm/mach-omap2/omap4-common.c
View File

@ -299,30 +299,6 @@ static const struct of_device_id intc_match[] = {
static struct device_node *intc_node;
unsigned int omap4_xlate_irq(unsigned int hwirq)
{
struct of_phandle_args irq_data;
unsigned int irq;
if (!intc_node)
intc_node = of_find_matching_node(NULL, intc_match);
if (WARN_ON(!intc_node))
return hwirq;
irq_data.np = intc_node;
irq_data.args_count = 3;
irq_data.args[0] = 0;
irq_data.args[1] = hwirq - OMAP44XX_IRQ_GIC_START;
irq_data.args[2] = IRQ_TYPE_LEVEL_HIGH;
irq = irq_create_of_mapping(&irq_data);
if (WARN_ON(!irq))
irq = hwirq;
return irq;
}
void __init omap_gic_of_init(void)
{
struct device_node *np;

294
arch/arm/mach-omap2/omap_device.c
View File

@ -35,6 +35,8 @@
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/notifier.h>
#include "common.h"
@ -308,88 +310,6 @@ int omap_device_get_context_loss_count(struct platform_device *pdev)
return ret;
}
/**
* omap_device_count_resources - count number of struct resource entries needed
* @od: struct omap_device *
* @flags: Type of resources to include when counting (IRQ/DMA/MEM)
*
* Count the number of struct resource entries needed for this
* omap_device @od. Used by omap_device_build_ss() to determine how
* much memory to allocate before calling
* omap_device_fill_resources(). Returns the count.
*/
static int omap_device_count_resources(struct omap_device *od,
unsigned long flags)
{
int c = 0;
int i;
for (i = 0; i < od->hwmods_cnt; i++)
c += omap_hwmod_count_resources(od->hwmods[i], flags);
pr_debug("omap_device: %s: counted %d total resources across %d hwmods\n",
od->pdev->name, c, od->hwmods_cnt);
return c;
}
/**
* omap_device_fill_resources - fill in array of struct resource
* @od: struct omap_device *
* @res: pointer to an array of struct resource to be filled in
*
* Populate one or more empty struct resource pointed to by @res with
* the resource data for this omap_device @od. Used by
* omap_device_build_ss() after calling omap_device_count_resources().
* Ideally this function would not be needed at all. If omap_device
* replaces platform_device, then we can specify our own
* get_resource()/ get_irq()/etc functions that use the underlying
* omap_hwmod information. Or if platform_device is extended to use
* subarchitecture-specific function pointers, the various
* platform_device functions can simply call omap_device internal
* functions to get device resources. Hacking around the existing
* platform_device code wastes memory. Returns 0.
*/
static int omap_device_fill_resources(struct omap_device *od,
struct resource *res)
{
int i, r;
for (i = 0; i < od->hwmods_cnt; i++) {
r = omap_hwmod_fill_resources(od->hwmods[i], res);
res += r;
}
return 0;
}
/**
* _od_fill_dma_resources - fill in array of struct resource with dma resources
* @od: struct omap_device *
* @res: pointer to an array of struct resource to be filled in
*
* Populate one or more empty struct resource pointed to by @res with
* the dma resource data for this omap_device @od. Used by
* omap_device_alloc() after calling omap_device_count_resources().
*
* Ideally this function would not be needed at all. If we have
* mechanism to get dma resources from DT.
*
* Returns 0.
*/
static int _od_fill_dma_resources(struct omap_device *od,
struct resource *res)
{
int i, r;
for (i = 0; i < od->hwmods_cnt; i++) {
r = omap_hwmod_fill_dma_resources(od->hwmods[i], res);
res += r;
}
return 0;
}
/**
* omap_device_alloc - allocate an omap_device
* @pdev: platform_device that will be included in this omap_device
@ -407,8 +327,7 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev,
{
int ret = -ENOMEM;
struct omap_device *od;
struct resource *res = NULL;
int i, res_count;
int i;
struct omap_hwmod **hwmods;
od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
@ -424,74 +343,6 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev,
od->hwmods = hwmods;
od->pdev = pdev;
/*
* Non-DT Boot:
* Here, pdev->num_resources = 0, and we should get all the
* resources from hwmod.
*
* DT Boot:
* OF framework will construct the resource structure (currently
* does for MEM & IRQ resource) and we should respect/use these
* resources, killing hwmod dependency.
* If pdev->num_resources > 0, we assume that MEM & IRQ resources
* have been allocated by OF layer already (through DTB).
* As preparation for the future we examine the OF provided resources
* to see if we have DMA resources provided already. In this case
* there is no need to update the resources for the device, we use the
* OF provided ones.
*
* TODO: Once DMA resource is available from OF layer, we should
* kill filling any resources from hwmod.
*/
if (!pdev->num_resources) {
/* Count all resources for the device */
res_count = omap_device_count_resources(od, IORESOURCE_IRQ |
IORESOURCE_DMA |
IORESOURCE_MEM);
} else {
/* Take a look if we already have DMA resource via DT */
for (i = 0; i < pdev->num_resources; i++) {
struct resource *r = &pdev->resource[i];
/* We have it, no need to touch the resources */
if (r->flags == IORESOURCE_DMA)
goto have_everything;
}
/* Count only DMA resources for the device */
res_count = omap_device_count_resources(od, IORESOURCE_DMA);
/* The device has no DMA resource, no need for update */
if (!res_count)
goto have_everything;
res_count += pdev->num_resources;
}
/* Allocate resources memory to account for new resources */
res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
if (!res)
goto oda_exit3;
if (!pdev->num_resources) {
dev_dbg(&pdev->dev, "%s: using %d resources from hwmod\n",
__func__, res_count);
omap_device_fill_resources(od, res);
} else {
dev_dbg(&pdev->dev,
"%s: appending %d DMA resources from hwmod\n",
__func__, res_count - pdev->num_resources);
memcpy(res, pdev->resource,
sizeof(struct resource) * pdev->num_resources);
_od_fill_dma_resources(od, &res[pdev->num_resources]);
}
ret = platform_device_add_resources(pdev, res, res_count);
kfree(res);
if (ret)
goto oda_exit3;
have_everything:
pdev->archdata.od = od;
for (i = 0; i < oh_cnt; i++) {
@ -501,8 +352,6 @@ have_everything:
return od;
oda_exit3:
kfree(hwmods);
oda_exit2:
kfree(od);
oda_exit1:
@ -521,6 +370,93 @@ void omap_device_delete(struct omap_device *od)
kfree(od);
}
/**
* omap_device_copy_resources - Add legacy IO and IRQ resources
* @oh: interconnect target module
* @pdev: platform device to copy resources to
*
* We still have legacy DMA and smartreflex needing resources.
* Let's populate what they need until we can eventually just
* remove this function. Note that there should be no need to
* call this from omap_device_build_from_dt(), nor should there
* be any need to call it for other devices.
*/
static int
omap_device_copy_resources(struct omap_hwmod *oh,
struct platform_device *pdev)
{
struct device_node *np, *child;
struct property *prop;
struct resource *res;
const char *name;
int error, irq = 0;
if (!oh || !oh->od || !oh->od->pdev) {
error = -EINVAL;
goto error;
}
np = oh->od->pdev->dev.of_node;
if (!np) {
error = -ENODEV;
goto error;
}
res = kzalloc(sizeof(*res) * 2, GFP_KERNEL);
if (!res)
return -ENOMEM;
/* Do we have a dts range for the interconnect target module? */
error = omap_hwmod_parse_module_range(oh, np, res);
/* No ranges, rely on device reg entry */
if (error)
error = of_address_to_resource(np, 0, res);
if (error)
goto free;
/* SmartReflex needs first IO resource name to be "mpu" */
res[0].name = "mpu";
/*
* We may have a configured "ti,sysc" interconnect target with a
* dts child with the interrupt. If so use the first child's
* first interrupt for "ti-hwmods" legacy support.
*/
of_property_for_each_string(np, "compatible", prop, name)
if (!strncmp("ti,sysc-", name, 8))
break;
child = of_get_next_available_child(np, NULL);
if (name)
irq = irq_of_parse_and_map(child, 0);
if (!irq)
irq = irq_of_parse_and_map(np, 0);
if (!irq) {
error = -EINVAL;
goto free;
}
/* Legacy DMA code needs interrupt name to be "0" */
res[1].start = irq;
res[1].end = irq;
res[1].flags = IORESOURCE_IRQ;
res[1].name = "0";
error = platform_device_add_resources(pdev, res, 2);
free:
kfree(res);
error:
WARN(error, "%s: %s device %s failed: %i\n",
__func__, oh->name, dev_name(&pdev->dev),
error);
return error;
}
/**
* omap_device_build - build and register an omap_device with one omap_hwmod
* @pdev_name: name of the platform_device driver to use
@ -539,46 +475,25 @@ struct platform_device __init *omap_device_build(const char *pdev_name,
int pdev_id,
struct omap_hwmod *oh,
void *pdata, int pdata_len)
{
struct omap_hwmod *ohs[] = { oh };
if (!oh)
return ERR_PTR(-EINVAL);
return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata,
pdata_len);
}
/**
* omap_device_build_ss - build and register an omap_device with multiple hwmods
* @pdev_name: name of the platform_device driver to use
* @pdev_id: this platform_device's connection ID
* @oh: ptr to the single omap_hwmod that backs this omap_device
* @pdata: platform_data ptr to associate with the platform_device
* @pdata_len: amount of memory pointed to by @pdata
*
* Convenience function for building and registering an omap_device
* subsystem record. Subsystem records consist of multiple
* omap_hwmods. This function in turn builds and registers a
* platform_device record. Returns an ERR_PTR() on error, or passes
* along the return value of omap_device_register().
*/
struct platform_device __init *omap_device_build_ss(const char *pdev_name,
int pdev_id,
struct omap_hwmod **ohs,
int oh_cnt, void *pdata,
int pdata_len)
{
int ret = -ENOMEM;
struct platform_device *pdev;
struct omap_device *od;
if (!ohs || oh_cnt == 0 || !pdev_name)
if (!oh || !pdev_name)
return ERR_PTR(-EINVAL);
if (!pdata && pdata_len > 0)
return ERR_PTR(-EINVAL);
if (strncmp(oh->name, "smartreflex", 11) &&
strncmp(oh->name, "dma", 3)) {
pr_warn("%s need to update %s to probe with dt\na",
__func__, pdev_name);
ret = -ENODEV;
goto odbs_exit;
}
pdev = platform_device_alloc(pdev_name, pdev_id);
if (!pdev) {
ret = -ENOMEM;
@ -591,7 +506,16 @@ struct platform_device __init *omap_device_build_ss(const char *pdev_name,
else
dev_set_name(&pdev->dev, "%s", pdev->name);
od = omap_device_alloc(pdev, ohs, oh_cnt);
/*
* Must be called before omap_device_alloc() as oh->od
* only contains the currently registered omap_device
* and will get overwritten by omap_device_alloc().
*/
ret = omap_device_copy_resources(oh, pdev);
if (ret)
goto odbs_exit1;
od = omap_device_alloc(pdev, &oh, 1);
if (IS_ERR(od))
goto odbs_exit1;

4
arch/arm/mach-omap2/omap_device.h
View File

@ -75,10 +75,6 @@ struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len);
struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **oh, int oh_cnt,
void *pdata, int pdata_len);
struct omap_device *omap_device_alloc(struct platform_device *pdev,
struct omap_hwmod **ohs, int oh_cnt);
void omap_device_delete(struct omap_device *od);

571
arch/arm/mach-omap2/omap_hwmod.c
View File

@ -993,6 +993,34 @@ static int _enable_clocks(struct omap_hwmod *oh)
return 0;
}
/**
* _omap4_clkctrl_managed_by_clkfwk - true if clkctrl managed by clock framework
* @oh: struct omap_hwmod *
*/
static bool _omap4_clkctrl_managed_by_clkfwk(struct omap_hwmod *oh)
{
if (oh->prcm.omap4.flags & HWMOD_OMAP4_CLKFWK_CLKCTR_CLOCK)
return true;
return false;
}
/**
* _omap4_has_clkctrl_clock - returns true if a module has clkctrl clock
* @oh: struct omap_hwmod *
*/
static bool _omap4_has_clkctrl_clock(struct omap_hwmod *oh)
{
if (oh->prcm.omap4.clkctrl_offs)
return true;
if (!oh->prcm.omap4.clkctrl_offs &&
oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET)
return true;
return false;
}
/**
* _disable_clocks - disable hwmod main clock and interface clocks
* @oh: struct omap_hwmod *
@ -1030,7 +1058,8 @@ static int _disable_clocks(struct omap_hwmod *oh)
*/
static void _omap4_enable_module(struct omap_hwmod *oh)
{
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
if (!oh->clkdm || !oh->prcm.omap4.modulemode ||
_omap4_clkctrl_managed_by_clkfwk(oh))
return;
pr_debug("omap_hwmod: %s: %s: %d\n",
@ -1061,8 +1090,10 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
if (oh->flags & HWMOD_NO_IDLEST)
return 0;
if (!oh->prcm.omap4.clkctrl_offs &&
!(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
if (_omap4_clkctrl_managed_by_clkfwk(oh))
return 0;
if (!_omap4_has_clkctrl_clock(oh))
return 0;
return omap_cm_wait_module_idle(oh->clkdm->prcm_partition,
@ -1070,215 +1101,6 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
oh->prcm.omap4.clkctrl_offs, 0);
}
/**
* _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
* @oh: struct omap_hwmod *oh
*
* Count and return the number of MPU IRQs associated with the hwmod
* @oh. Used to allocate struct resource data. Returns 0 if @oh is
* NULL.
*/
static int _count_mpu_irqs(struct omap_hwmod *oh)
{
struct omap_hwmod_irq_info *ohii;
int i = 0;
if (!oh || !oh->mpu_irqs)
return 0;
do {
ohii = &oh->mpu_irqs[i++];
} while (ohii->irq != -1);
return i-1;
}
/**
* _count_sdma_reqs - count the number of SDMA request lines associated with @oh
* @oh: struct omap_hwmod *oh
*
* Count and return the number of SDMA request lines associated with
* the hwmod @oh. Used to allocate struct resource data. Returns 0
* if @oh is NULL.
*/
static int _count_sdma_reqs(struct omap_hwmod *oh)
{
struct omap_hwmod_dma_info *ohdi;
int i = 0;
if (!oh || !oh->sdma_reqs)
return 0;
do {
ohdi = &oh->sdma_reqs[i++];
} while (ohdi->dma_req != -1);
return i-1;
}
/**
* _count_ocp_if_addr_spaces - count the number of address space entries for @oh
* @oh: struct omap_hwmod *oh
*
* Count and return the number of address space ranges associated with
* the hwmod @oh. Used to allocate struct resource data. Returns 0
* if @oh is NULL.
*/
static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os)
{
struct omap_hwmod_addr_space *mem;
int i = 0;
if (!os || !os->addr)
return 0;
do {
mem = &os->addr[i++];
} while (mem->pa_start != mem->pa_end);
return i-1;
}
/**
* _get_mpu_irq_by_name - fetch MPU interrupt line number by name
* @oh: struct omap_hwmod * to operate on
* @name: pointer to the name of the MPU interrupt number to fetch (optional)
* @irq: pointer to an unsigned int to store the MPU IRQ number to
*
* Retrieve a MPU hardware IRQ line number named by @name associated
* with the IP block pointed to by @oh. The IRQ number will be filled
* into the address pointed to by @dma. When @name is non-null, the
* IRQ line number associated with the named entry will be returned.
* If @name is null, the first matching entry will be returned. Data
* order is not meaningful in hwmod data, so callers are strongly
* encouraged to use a non-null @name whenever possible to avoid
* unpredictable effects if hwmod data is later added that causes data
* ordering to change. Returns 0 upon success or a negative error
* code upon error.
*/
static int _get_mpu_irq_by_name(struct omap_hwmod *oh, const char *name,
unsigned int *irq)
{
int i;
bool found = false;
if (!oh->mpu_irqs)
return -ENOENT;
i = 0;
while (oh->mpu_irqs[i].irq != -1) {
if (name == oh->mpu_irqs[i].name ||
!strcmp(name, oh->mpu_irqs[i].name)) {
found = true;
break;
}
i++;
}
if (!found)
return -ENOENT;
*irq = oh->mpu_irqs[i].irq;
return 0;
}
/**
* _get_sdma_req_by_name - fetch SDMA request line ID by name
* @oh: struct omap_hwmod * to operate on
* @name: pointer to the name of the SDMA request line to fetch (optional)
* @dma: pointer to an unsigned int to store the request line ID to
*
* Retrieve an SDMA request line ID named by @name on the IP block
* pointed to by @oh. The ID will be filled into the address pointed
* to by @dma. When @name is non-null, the request line ID associated
* with the named entry will be returned. If @name is null, the first
* matching entry will be returned. Data order is not meaningful in
* hwmod data, so callers are strongly encouraged to use a non-null
* @name whenever possible to avoid unpredictable effects if hwmod
* data is later added that causes data ordering to change. Returns 0
* upon success or a negative error code upon error.
*/
static int _get_sdma_req_by_name(struct omap_hwmod *oh, const char *name,
unsigned int *dma)
{
int i;
bool found = false;
if (!oh->sdma_reqs)
return -ENOENT;
i = 0;
while (oh->sdma_reqs[i].dma_req != -1) {
if (name == oh->sdma_reqs[i].name ||
!strcmp(name, oh->sdma_reqs[i].name)) {
found = true;
break;
}
i++;
}
if (!found)
return -ENOENT;
*dma = oh->sdma_reqs[i].dma_req;
return 0;
}
/**
* _get_addr_space_by_name - fetch address space start & end by name
* @oh: struct omap_hwmod * to operate on
* @name: pointer to the name of the address space to fetch (optional)
* @pa_start: pointer to a u32 to store the starting address to
* @pa_end: pointer to a u32 to store the ending address to
*
* Retrieve address space start and end addresses for the IP block
* pointed to by @oh. The data will be filled into the addresses
* pointed to by @pa_start and @pa_end. When @name is non-null, the
* address space data associated with the named entry will be
* returned. If @name is null, the first matching entry will be
* returned. Data order is not meaningful in hwmod data, so callers
* are strongly encouraged to use a non-null @name whenever possible
* to avoid unpredictable effects if hwmod data is later added that
* causes data ordering to change. Returns 0 upon success or a
* negative error code upon error.
*/
static int _get_addr_space_by_name(struct omap_hwmod *oh, const char *name,
u32 *pa_start, u32 *pa_end)
{
int j;
struct omap_hwmod_ocp_if *os;
bool found = false;
list_for_each_entry(os, &oh->slave_ports, node) {
if (!os->addr)
return -ENOENT;
j = 0;
while (os->addr[j].pa_start != os->addr[j].pa_end) {
if (name == os->addr[j].name ||
!strcmp(name, os->addr[j].name)) {
found = true;
break;
}
j++;
}
if (found)
break;
}
if (!found)
return -ENOENT;
*pa_start = os->addr[j].pa_start;
*pa_end = os->addr[j].pa_end;
return 0;
}
/**
* _save_mpu_port_index - find and save the index to @oh's MPU port
* @oh: struct omap_hwmod *
@ -1329,32 +1151,6 @@ static struct omap_hwmod_ocp_if *_find_mpu_rt_port(struct omap_hwmod *oh)
return oh->_mpu_port;
};
/**
* _find_mpu_rt_addr_space - return MPU register target address space for @oh
* @oh: struct omap_hwmod *
*
* Returns a pointer to the struct omap_hwmod_addr_space record representing
* the register target MPU address space; or returns NULL upon error.
*/
static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os;
struct omap_hwmod_addr_space *mem;
int found = 0, i = 0;
os = _find_mpu_rt_port(oh);
if (!os || !os->addr)
return NULL;
do {
mem = &os->addr[i++];
if (mem->flags & ADDR_TYPE_RT)
found = 1;
} while (!found && mem->pa_start != mem->pa_end);
return (found) ? mem : NULL;
}
/**
* _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
* @oh: struct omap_hwmod *
@ -1847,7 +1643,8 @@ static int _omap4_disable_module(struct omap_hwmod *oh)
{
int v;
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
if (!oh->clkdm || !oh->prcm.omap4.modulemode ||
_omap4_clkctrl_managed_by_clkfwk(oh))
return -EINVAL;
/*
@ -2361,6 +2158,75 @@ static int of_dev_hwmod_lookup(struct device_node *np,
return -ENODEV;
}
/**
* omap_hwmod_parse_module_range - map module IO range from device tree
* @oh: struct omap_hwmod *
* @np: struct device_node *
*
* Parse the device tree range an interconnect target module provides
* for it's child device IP blocks. This way we can support the old
* "ti,hwmods" property with just dts data without a need for platform
* data for IO resources. And we don't need all the child IP device
* nodes available in the dts.
*/
int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
struct device_node *np,
struct resource *res)
{
struct property *prop;
const __be32 *ranges;
const char *name;
u32 nr_addr, nr_size;
u64 base, size;
int len, error;
if (!res)
return -EINVAL;
ranges = of_get_property(np, "ranges", &len);
if (!ranges)
return -ENOENT;
len /= sizeof(*ranges);
if (len < 3)
return -EINVAL;
of_property_for_each_string(np, "compatible", prop, name)
if (!strncmp("ti,sysc-", name, 8))
break;
if (!name)
return -ENOENT;
error = of_property_read_u32(np, "#address-cells", &nr_addr);
if (error)
return -ENOENT;
error = of_property_read_u32(np, "#size-cells", &nr_size);
if (error)
return -ENOENT;
if (nr_addr != 1 || nr_size != 1) {
pr_err("%s: invalid range for %s->%s\n", __func__,
oh->name, np->name);
return -EINVAL;
}
ranges++;
base = of_translate_address(np, ranges++);
size = be32_to_cpup(ranges);
pr_debug("omap_hwmod: %s %s at 0x%llx size 0x%llx\n",
oh->name, np->name, base, size);
res->start = base;
res->end = base + size - 1;
res->flags = IORESOURCE_MEM;
return 0;
}
/**
* _init_mpu_rt_base - populate the virtual address for a hwmod
* @oh: struct omap_hwmod * to locate the virtual address
@ -2381,8 +2247,9 @@ static int of_dev_hwmod_lookup(struct device_node *np,
static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
int index, struct device_node *np)
{
struct omap_hwmod_addr_space *mem;
void __iomem *va_start = NULL;
struct resource res;
int error;
if (!oh)
return -EINVAL;
@ -2397,28 +2264,22 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
return -ENXIO;
mem = _find_mpu_rt_addr_space(oh);
if (!mem) {
pr_debug("omap_hwmod: %s: no MPU register target found\n",
oh->name);
/* Extract the IO space from device tree blob */
if (!np) {
pr_err("omap_hwmod: %s: no dt node\n", oh->name);
return -ENXIO;
}
va_start = of_iomap(np, index + oh->mpu_rt_idx);
} else {
va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
if (!np) {
pr_err("omap_hwmod: %s: no dt node\n", oh->name);
return -ENXIO;
}
/* Do we have a dts range for the interconnect target module? */
error = omap_hwmod_parse_module_range(oh, np, &res);
if (!error)
va_start = ioremap(res.start, resource_size(&res));
/* No ranges, rely on device reg entry */
if (!va_start)
va_start = of_iomap(np, index + oh->mpu_rt_idx);
if (!va_start) {
if (mem)
pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
else
pr_err("omap_hwmod: %s: Missing dt reg%i for %pOF\n",
oh->name, index, np);
pr_err("omap_hwmod: %s: Missing dt reg%i for %pOF\n",
oh->name, index, np);
return -ENXIO;
}
@ -2829,8 +2690,10 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh)
if (!_find_mpu_rt_port(oh))
return 0;
if (!oh->prcm.omap4.clkctrl_offs &&
!(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
if (_omap4_clkctrl_managed_by_clkfwk(oh))
return 0;
if (!_omap4_has_clkctrl_clock(oh))
return 0;
/* XXX check module SIDLEMODE, hardreset status */
@ -2986,8 +2849,7 @@ static int _omap4_disable_direct_prcm(struct omap_hwmod *oh)
if (!oh)
return -EINVAL;
oh->prcm.omap4.clkctrl_offs = 0;
oh->prcm.omap4.modulemode = 0;
oh->prcm.omap4.flags |= HWMOD_OMAP4_CLKFWK_CLKCTR_CLOCK;
return 0;
}
@ -3321,189 +3183,6 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh)
* IP block data retrieval functions
*/
/**
* omap_hwmod_count_resources - count number of struct resources needed by hwmod
* @oh: struct omap_hwmod *
* @flags: Type of resources to include when counting (IRQ/DMA/MEM)
*
* Count the number of struct resource array elements necessary to
* contain omap_hwmod @oh resources. Intended to be called by code
* that registers omap_devices. Intended to be used to determine the
* size of a dynamically-allocated struct resource array, before
* calling omap_hwmod_fill_resources(). Returns the number of struct
* resource array elements needed.
*
* XXX This code is not optimized. It could attempt to merge adjacent
* resource IDs.
*
*/
int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags)
{
int ret = 0;
if (flags & IORESOURCE_IRQ)
ret += _count_mpu_irqs(oh);
if (flags & IORESOURCE_DMA)
ret += _count_sdma_reqs(oh);
if (flags & IORESOURCE_MEM) {
struct omap_hwmod_ocp_if *os;
list_for_each_entry(os, &oh->slave_ports, node)
ret += _count_ocp_if_addr_spaces(os);
}
return ret;
}
/**
* omap_hwmod_fill_resources - fill struct resource array with hwmod data
* @oh: struct omap_hwmod *
* @res: pointer to the first element of an array of struct resource to fill
*
* Fill the struct resource array @res with resource data from the
* omap_hwmod @oh. Intended to be called by code that registers
* omap_devices. See also omap_hwmod_count_resources(). Returns the
* number of array elements filled.
*/
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
{
struct omap_hwmod_ocp_if *os;
int i, j, mpu_irqs_cnt, sdma_reqs_cnt, addr_cnt;
int r = 0;
/* For each IRQ, DMA, memory area, fill in array.*/
mpu_irqs_cnt = _count_mpu_irqs(oh);
for (i = 0; i < mpu_irqs_cnt; i++) {
unsigned int irq;
if (oh->xlate_irq)
irq = oh->xlate_irq((oh->mpu_irqs + i)->irq);
else
irq = (oh->mpu_irqs + i)->irq;
(res + r)->name = (oh->mpu_irqs + i)->name;
(res + r)->start = irq;
(res + r)->end = irq;
(res + r)->flags = IORESOURCE_IRQ;
r++;
}
sdma_reqs_cnt = _count_sdma_reqs(oh);
for (i = 0; i < sdma_reqs_cnt; i++) {
(res + r)->name = (oh->sdma_reqs + i)->name;
(res + r)->start = (oh->sdma_reqs + i)->dma_req;
(res + r)->end = (oh->sdma_reqs + i)->dma_req;
(res + r)->flags = IORESOURCE_DMA;
r++;
}
list_for_each_entry(os, &oh->slave_ports, node) {
addr_cnt = _count_ocp_if_addr_spaces(os);
for (j = 0; j < addr_cnt; j++) {
(res + r)->name = (os->addr + j)->name;
(res + r)->start = (os->addr + j)->pa_start;
(res + r)->end = (os->addr + j)->pa_end;
(res + r)->flags = IORESOURCE_MEM;
r++;
}
}
return r;
}
/**
* omap_hwmod_fill_dma_resources - fill struct resource array with dma data
* @oh: struct omap_hwmod *
* @res: pointer to the array of struct resource to fill
*
* Fill the struct resource array @res with dma resource data from the
* omap_hwmod @oh. Intended to be called by code that registers
* omap_devices. See also omap_hwmod_count_resources(). Returns the
* number of array elements filled.
*/
int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res)
{
int i, sdma_reqs_cnt;
int r = 0;
sdma_reqs_cnt = _count_sdma_reqs(oh);
for (i = 0; i < sdma_reqs_cnt; i++) {
(res + r)->name = (oh->sdma_reqs + i)->name;
(res + r)->start = (oh->sdma_reqs + i)->dma_req;
(res + r)->end = (oh->sdma_reqs + i)->dma_req;
(res + r)->flags = IORESOURCE_DMA;
r++;
}
return r;
}
/**
* omap_hwmod_get_resource_byname - fetch IP block integration data by name
* @oh: struct omap_hwmod * to operate on
* @type: one of the IORESOURCE_* constants from include/linux/ioport.h
* @name: pointer to the name of the data to fetch (optional)
* @rsrc: pointer to a struct resource, allocated by the caller
*
* Retrieve MPU IRQ, SDMA request line, or address space start/end
* data for the IP block pointed to by @oh. The data will be filled
* into a struct resource record pointed to by @rsrc. The struct
* resource must be allocated by the caller. When @name is non-null,
* the data associated with the matching entry in the IRQ/SDMA/address
* space hwmod data arrays will be returned. If @name is null, the
* first array entry will be returned. Data order is not meaningful
* in hwmod data, so callers are strongly encouraged to use a non-null
* @name whenever possible to avoid unpredictable effects if hwmod
* data is later added that causes data ordering to change. This
* function is only intended for use by OMAP core code. Device
* drivers should not call this function - the appropriate bus-related
* data accessor functions should be used instead. Returns 0 upon
* success or a negative error code upon error.
*/
int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
const char *name, struct resource *rsrc)
{
int r;
unsigned int irq, dma;
u32 pa_start, pa_end;
if (!oh || !rsrc)
return -EINVAL;
if (type == IORESOURCE_IRQ) {
r = _get_mpu_irq_by_name(oh, name, &irq);
if (r)
return r;
rsrc->start = irq;
rsrc->end = irq;
} else if (type == IORESOURCE_DMA) {
r = _get_sdma_req_by_name(oh, name, &dma);
if (r)
return r;
rsrc->start = dma;
rsrc->end = dma;
} else if (type == IORESOURCE_MEM) {
r = _get_addr_space_by_name(oh, name, &pa_start, &pa_end);
if (r)
return r;
rsrc->start = pa_start;
rsrc->end = pa_end;
} else {
return -EINVAL;
}
rsrc->flags = type;
rsrc->name = name;
return 0;
}
/**
* omap_hwmod_get_pwrdm - return pointer to this module's main powerdomain
* @oh: struct omap_hwmod *

88
arch/arm/mach-omap2/omap_hwmod.h
View File

@ -21,7 +21,6 @@
*
* To do:
* - add interconnect error log structures
* - add pinmuxing
* - init_conn_id_bit (CONNID_BIT_VECTOR)
* - implement default hwmod SMS/SDRC flags?
* - move Linux-specific data ("non-ROM data") out
@ -150,50 +149,6 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
#define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
#endif
/**
* struct omap_hwmod_mux_info - hwmod specific mux configuration
* @pads: array of omap_device_pad entries
* @nr_pads: number of omap_device_pad entries
*
* Note that this is currently built during init as needed.
*/
struct omap_hwmod_mux_info {
int nr_pads;
struct omap_device_pad *pads;
int nr_pads_dynamic;
struct omap_device_pad **pads_dynamic;
int *irqs;
bool enabled;
};
/**
* struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
* @name: name of the IRQ channel (module local name)
* @irq: IRQ channel ID (should be non-negative except -1 = terminator)
*
* @name should be something short, e.g., "tx" or "rx". It is for use
* by platform_get_resource_byname(). It is defined locally to the
* hwmod.
*/
struct omap_hwmod_irq_info {
const char *name;
s16 irq;
};
/**
* struct omap_hwmod_dma_info - DMA channels used by the hwmod
* @name: name of the DMA channel (module local name)
* @dma_req: DMA request ID (should be non-negative except -1 = terminator)
*
* @name should be something short, e.g., "tx" or "rx". It is for use
* by platform_get_resource_byname(). It is defined locally to the
* hwmod.
*/
struct omap_hwmod_dma_info {
const char *name;
s16 dma_req;
};
/**
* struct omap_hwmod_rst_info - IPs reset lines use by hwmod
* @name: name of the reset line (module local name)
@ -243,34 +198,6 @@ struct omap_hwmod_omap2_firewall {
u8 flags;
};
/*
* omap_hwmod_addr_space.flags bits
*
* ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
* ADDR_TYPE_RT: Address space contains module register target data.
*/
#define ADDR_MAP_ON_INIT (1 << 0) /* XXX does not belong */
#define ADDR_TYPE_RT (1 << 1)
/**
* struct omap_hwmod_addr_space - address space handled by the hwmod
* @name: name of the address space
* @pa_start: starting physical address
* @pa_end: ending physical address
* @flags: (see omap_hwmod_addr_space.flags macros above)
*
* Address space doesn't necessarily follow physical interconnect
* structure. GPMC is one example.
*/
struct omap_hwmod_addr_space {
const char *name;
u32 pa_start;
u32 pa_end;
u8 flags;
};
/*
* omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
* interface to interact with the hwmod. Used to add sleep dependencies
@ -446,9 +373,12 @@ struct omap_hwmod_omap2_prcm {
* HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL
* offset of zero; this flag bit should be set in those cases to
* distinguish from hwmods that have no clkctrl offset.
* HWMOD_OMAP4_CLKFWK_CLKCTR_CLOCK: Module clockctrl clock is managed
* by the common clock framework and not hwmod.
*/
#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0)
#define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET (1 << 1)
#define HWMOD_OMAP4_CLKFWK_CLKCTR_CLOCK (1 << 2)
/**
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
@ -626,8 +556,6 @@ struct omap_hwmod_class {
* @name: name of the hwmod
* @class: struct omap_hwmod_class * to the class of this hwmod
* @od: struct omap_device currently associated with this hwmod (internal use)
* @mpu_irqs: ptr to an array of MPU IRQs
* @sdma_reqs: ptr to an array of System DMA request IDs
* @prcm: PRCM data pertaining to this hwmod
* @main_clk: main clock: OMAP clock name
* @_clk: pointer to the main struct clk (filled in at runtime)
@ -670,9 +598,6 @@ struct omap_hwmod {
const char *name;
struct omap_hwmod_class *class;
struct omap_device *od;
struct omap_hwmod_mux_info *mux;
struct omap_hwmod_irq_info *mpu_irqs;
struct omap_hwmod_dma_info *sdma_reqs;
struct omap_hwmod_rst_info *rst_lines;
union {
struct omap_hwmod_omap2_prcm omap2;
@ -691,7 +616,6 @@ struct omap_hwmod {
struct lock_class_key hwmod_key; /* unique lock class */
struct list_head node;
struct omap_hwmod_ocp_if *_mpu_port;
unsigned int (*xlate_irq)(unsigned int);
u32 flags;
u8 mpu_rt_idx;
u8 response_lat;
@ -705,11 +629,16 @@ struct omap_hwmod {
struct omap_hwmod *parent_hwmod;
};
struct device_node;
struct omap_hwmod *omap_hwmod_lookup(const char *name);
int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
void *data);
int __init omap_hwmod_setup_one(const char *name);
int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
struct device_node *np,
struct resource *res);
int omap_hwmod_enable(struct omap_hwmod *oh);
int omap_hwmod_idle(struct omap_hwmod *oh);
@ -724,7 +653,6 @@ int omap_hwmod_softreset(struct omap_hwmod *oh);
int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags);
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
const char *name, struct resource *res);

2
arch/arm/mach-omap2/omap_hwmod_2420_data.c
View File

@ -155,7 +155,6 @@ static struct omap_dma_dev_attr dma_dev_attr = {
static struct omap_hwmod omap2420_dma_system_hwmod = {
.name = "dma",
.class = &omap2xxx_dma_hwmod_class,
.mpu_irqs = omap2_dma_system_irqs,
.main_clk = "core_l3_ck",
.dev_attr = &dma_dev_attr,
.flags = HWMOD_NO_IDLEST,
@ -371,7 +370,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_dma_system_hwmod,
.clk = "sdma_ick",
.addr = omap2_dma_system_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

2
arch/arm/mach-omap2/omap_hwmod_2430_data.c
View File

@ -153,7 +153,6 @@ static struct omap_dma_dev_attr dma_dev_attr = {
static struct omap_hwmod omap2430_dma_system_hwmod = {
.name = "dma",
.class = &omap2xxx_dma_hwmod_class,
.mpu_irqs = omap2_dma_system_irqs,
.main_clk = "core_l3_ck",
.dev_attr = &dma_dev_attr,
.flags = HWMOD_NO_IDLEST,
@ -572,7 +571,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_dma_system_hwmod,
.clk = "sdma_ick",
.addr = omap2_dma_system_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

27
arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
View File

@ -1,27 +0,0 @@
/*
* omap_hwmod_2xxx_3xxx_interconnect_data.c - common interconnect data, OMAP2/3
*
* Copyright (C) 2009-2011 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* XXX handle crossbar/shared link difference for L3?
* XXX these should be marked initdata for multi-OMAP kernels
*/
#include <asm/sizes.h>
#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
struct omap_hwmod_addr_space omap2_dma_system_addrs[] = {
{
.pa_start = 0x48056000,
.pa_end = 0x48056000 + SZ_4K - 1,
.flags = ADDR_TYPE_RT,
},
{ },
};

15
arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
View File

@ -65,21 +65,6 @@ struct omap_hwmod_class iva_hwmod_class = {
.name = "iva",
};
/* Common MPU IRQ line data */
struct omap_hwmod_irq_info omap2_dispc_irqs[] = {
{ .irq = 25 + OMAP_INTC_START, },
{ .irq = -1, },
};
struct omap_hwmod_irq_info omap2_dma_system_irqs[] = {
{ .name = "0", .irq = 12 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ0 */
{ .name = "1", .irq = 13 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ1 */
{ .name = "2", .irq = 14 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ2 */
{ .name = "3", .irq = 15 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ3 */
{ .irq = -1, },
};
struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x14,

6
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
View File

@ -20,11 +20,6 @@
#include "prm-regbits-24xx.h"
#include "wd_timer.h"
static struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = {
{ .name = "dispc", .dma_req = 5 },
{ .dma_req = -1, },
};
/*
* 'dispc' class
* display controller
@ -550,7 +545,6 @@ struct omap_hwmod omap2xxx_dss_core_hwmod = {
.name = "dss_core",
.class = &omap2_dss_hwmod_class,
.main_clk = "dss1_fck", /* instead of dss_fck */
.sdma_reqs = omap2xxx_dss_sdma_chs,
.prcm = {
.omap2 = {
.prcm_reg_id = 1,

130
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
View File

@ -159,54 +159,24 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
.user = OCP_USER_MPU,
};
static struct omap_hwmod_addr_space am33xx_epwmss0_addr_space[] = {
{
.pa_start = 0x48300000,
.pa_end = 0x48300000 + SZ_16 - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_epwmss0_hwmod,
.clk = "l4ls_gclk",
.addr = am33xx_epwmss0_addr_space,
.user = OCP_USER_MPU,
};
static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = {
{
.pa_start = 0x48302000,
.pa_end = 0x48302000 + SZ_16 - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_epwmss1_hwmod,
.clk = "l4ls_gclk",
.addr = am33xx_epwmss1_addr_space,
.user = OCP_USER_MPU,
};
static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = {
{
.pa_start = 0x48304000,
.pa_end = 0x48304000 + SZ_16 - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_epwmss2_hwmod,
.clk = "l4ls_gclk",
.addr = am33xx_epwmss2_addr_space,
.user = OCP_USER_MPU,
};
@ -250,92 +220,42 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = {
};
/* l4 ls -> mcasp0 */
static struct omap_hwmod_addr_space am33xx_mcasp0_addr_space[] = {
{
.pa_start = 0x48038000,
.pa_end = 0x48038000 + SZ_8K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_mcasp0_hwmod,
.clk = "l4ls_gclk",
.addr = am33xx_mcasp0_addr_space,
.user = OCP_USER_MPU,
};
/* l4 ls -> mcasp1 */
static struct omap_hwmod_addr_space am33xx_mcasp1_addr_space[] = {
{
.pa_start = 0x4803C000,
.pa_end = 0x4803C000 + SZ_8K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_mcasp1_hwmod,
.clk = "l4ls_gclk",
.addr = am33xx_mcasp1_addr_space,
.user = OCP_USER_MPU,
};
/* l4 ls -> mmc0 */
static struct omap_hwmod_addr_space am33xx_mmc0_addr_space[] = {
{
.pa_start = 0x48060100,
.pa_end = 0x48060100 + SZ_4K - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_mmc0_hwmod,
.clk = "l4ls_gclk",
.addr = am33xx_mmc0_addr_space,
.user = OCP_USER_MPU,
};
/* l4 ls -> mmc1 */
static struct omap_hwmod_addr_space am33xx_mmc1_addr_space[] = {
{
.pa_start = 0x481d8100,
.pa_end = 0x481d8100 + SZ_4K - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1 = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_mmc1_hwmod,
.clk = "l4ls_gclk",
.addr = am33xx_mmc1_addr_space,
.user = OCP_USER_MPU,
};
/* l3 s -> mmc2 */
static struct omap_hwmod_addr_space am33xx_mmc2_addr_space[] = {
{
.pa_start = 0x47810100,
.pa_end = 0x47810100 + SZ_64K - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_ocp_if am33xx_l3_s__mmc2 = {
.master = &am33xx_l3_s_hwmod,
.slave = &am33xx_mmc2_hwmod,
.clk = "l3s_gclk",
.addr = am33xx_mmc2_addr_space,
.user = OCP_USER_MPU,
};
@ -412,56 +332,26 @@ struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = {
};
/* l3 main -> tpcc0 */
static struct omap_hwmod_addr_space am33xx_tptc0_addr_space[] = {
{
.pa_start = 0x49800000,
.pa_end = 0x49800000 + SZ_8K - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = {
.master = &am33xx_l3_main_hwmod,
.slave = &am33xx_tptc0_hwmod,
.clk = "l3_gclk",
.addr = am33xx_tptc0_addr_space,
.user = OCP_USER_MPU,
};
/* l3 main -> tpcc1 */
static struct omap_hwmod_addr_space am33xx_tptc1_addr_space[] = {
{
.pa_start = 0x49900000,
.pa_end = 0x49900000 + SZ_8K - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = {
.master = &am33xx_l3_main_hwmod,
.slave = &am33xx_tptc1_hwmod,
.clk = "l3_gclk",
.addr = am33xx_tptc1_addr_space,
.user = OCP_USER_MPU,
};
/* l3 main -> tpcc2 */
static struct omap_hwmod_addr_space am33xx_tptc2_addr_space[] = {
{
.pa_start = 0x49a00000,
.pa_end = 0x49a00000 + SZ_8K - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = {
.master = &am33xx_l3_main_hwmod,
.slave = &am33xx_tptc2_hwmod,
.clk = "l3_gclk",
.addr = am33xx_tptc2_addr_space,
.user = OCP_USER_MPU,
};
@ -513,38 +403,18 @@ struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = {
};
/* l3 main -> sha0 HIB2 */
static struct omap_hwmod_addr_space am33xx_sha0_addrs[] = {
{
.pa_start = 0x53100000,
.pa_end = 0x53100000 + SZ_512 - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = {
.master = &am33xx_l3_main_hwmod,
.slave = &am33xx_sha0_hwmod,
.clk = "sha0_fck",
.addr = am33xx_sha0_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3 main -> AES0 HIB2 */
static struct omap_hwmod_addr_space am33xx_aes0_addrs[] = {
{
.pa_start = 0x53500000,
.pa_end = 0x53500000 + SZ_1M - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = {
.master = &am33xx_l3_main_hwmod,
.slave = &am33xx_aes0_hwmod,
.clk = "aes0_fck",
.addr = am33xx_aes0_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

6
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
View File

@ -778,9 +778,9 @@ struct omap_hwmod am33xx_mcasp1_hwmod = {
/* 'mmc' class */
static struct omap_hwmod_class_sysconfig am33xx_mmc_sysc = {
.rev_offs = 0x1fc,
.sysc_offs = 0x10,
.syss_offs = 0x14,
.rev_offs = 0x2fc,
.sysc_offs = 0x110,
.syss_offs = 0x114,
.sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),

39
arch/arm/mach-omap2/omap_hwmod_33xx_data.c
View File

@ -320,20 +320,11 @@ static struct omap_hwmod am33xx_usbss_hwmod = {
* Interfaces
*/
static struct omap_hwmod_addr_space am33xx_emif_addrs[] = {
{
.pa_start = 0x4c000000,
.pa_end = 0x4c000fff,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l3 main -> emif */
static struct omap_hwmod_ocp_if am33xx_l3_main__emif = {
.master = &am33xx_l3_main_hwmod,
.slave = &am33xx_emif_hwmod,
.clk = "dpll_core_m4_ck",
.addr = am33xx_emif_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -370,20 +361,10 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__pruss = {
};
/* l3_main -> debugss */
static struct omap_hwmod_addr_space am33xx_debugss_addrs[] = {
{
.pa_start = 0x4b000000,
.pa_end = 0x4b000000 + SZ_16M - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if am33xx_l3_main__debugss = {
.master = &am33xx_l3_main_hwmod,
.slave = &am33xx_debugss_hwmod,
.clk = "dpll_core_m4_ck",
.addr = am33xx_debugss_addrs,
.user = OCP_USER_MPU,
};
@ -428,20 +409,10 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__gpio0 = {
};
/* L4 WKUP -> ADC_TSC */
static struct omap_hwmod_addr_space am33xx_adc_tsc_addrs[] = {
{
.pa_start = 0x44E0D000,
.pa_end = 0x44E0D000 + SZ_8K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if am33xx_l4_wkup__adc_tsc = {
.master = &am33xx_l4_wkup_hwmod,
.slave = &am33xx_adc_tsc_hwmod,
.clk = "dpll_core_m4_div2_ck",
.addr = am33xx_adc_tsc_addrs,
.user = OCP_USER_MPU,
};
@ -452,20 +423,10 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = {
.user = OCP_USER_MPU,
};
static struct omap_hwmod_addr_space am33xx_lcdc_addr_space[] = {
{
.pa_start = 0x4830E000,
.pa_end = 0x4830E000 + SZ_8K - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
static struct omap_hwmod_ocp_if am33xx_l3_main__lcdc = {
.master = &am33xx_l3_main_hwmod,
.slave = &am33xx_lcdc_hwmod,
.clk = "dpll_core_m4_ck",
.addr = am33xx_lcdc_addr_space,
.user = OCP_USER_MPU,
};

61
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
View File

@ -565,12 +565,6 @@ static struct omap_hwmod_class i2c_class = {
.reset = &omap_i2c_reset,
};
static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = {
{ .name = "dispc", .dma_req = 5 },
{ .name = "dsi1", .dma_req = 74 },
{ .dma_req = -1, },
};
/* dss */
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
/*
@ -587,7 +581,6 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = {
.name = "dss_core",
.class = &omap2_dss_hwmod_class,
.main_clk = "dss1_alwon_fck", /* instead of dss_fck */
.sdma_reqs = omap3xxx_dss_sdma_chs,
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@ -607,7 +600,6 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = {
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.class = &omap2_dss_hwmod_class,
.main_clk = "dss1_alwon_fck", /* instead of dss_fck */
.sdma_reqs = omap3xxx_dss_sdma_chs,
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@ -647,7 +639,6 @@ static struct omap_hwmod_class omap3_dispc_hwmod_class = {
static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
.name = "dss_dispc",
.class = &omap3_dispc_hwmod_class,
.mpu_irqs = omap2_dispc_irqs,
.main_clk = "dss1_alwon_fck",
.prcm = {
.omap2 = {
@ -1017,7 +1008,6 @@ static struct omap_hwmod_class omap3xxx_dma_hwmod_class = {
static struct omap_hwmod omap3xxx_dma_system_hwmod = {
.name = "dma",
.class = &omap3xxx_dma_hwmod_class,
.mpu_irqs = omap2_dma_system_irqs,
.main_clk = "core_l3_ick",
.prcm = {
.omap2 = {
@ -2108,20 +2098,10 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
};
/* L4 CORE -> SR1 interface */
static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
{
.pa_start = OMAP34XX_SR1_BASE,
.pa_end = OMAP34XX_SR1_BASE + SZ_1K - 1,
.flags = ADDR_TYPE_RT,
},
{ },
};
static struct omap_hwmod_ocp_if omap34xx_l4_core__sr1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_sr1_hwmod,
.clk = "sr_l4_ick",
.addr = omap3_sr1_addr_space,
.user = OCP_USER_MPU,
};
@ -2129,25 +2109,15 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap36xx_sr1_hwmod,
.clk = "sr_l4_ick",
.addr = omap3_sr1_addr_space,
.user = OCP_USER_MPU,
};
/* L4 CORE -> SR1 interface */
static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = {
{
.pa_start = OMAP34XX_SR2_BASE,
.pa_end = OMAP34XX_SR2_BASE + SZ_1K - 1,
.flags = ADDR_TYPE_RT,
},
{ },
};
/* L4 CORE -> SR2 interface */
static struct omap_hwmod_ocp_if omap34xx_l4_core__sr2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_sr2_hwmod,
.clk = "sr_l4_ick",
.addr = omap3_sr2_addr_space,
.user = OCP_USER_MPU,
};
@ -2155,7 +2125,6 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap36xx_sr2_hwmod,
.clk = "sr_l4_ick",
.addr = omap3_sr2_addr_space,
.user = OCP_USER_MPU,
};
@ -2524,21 +2493,11 @@ static struct omap_hwmod_ocp_if omap3xxx_dma_system__l3 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
{
.pa_start = 0x48056000,
.pa_end = 0x48056fff,
.flags = ADDR_TYPE_RT,
},
{ },
};
/* l4_cfg -> dma_system */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dma_system_hwmod,
.clk = "core_l4_ick",
.addr = omap3xxx_dma_system_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -3148,7 +3107,7 @@ int __init omap3xxx_hwmod_init(void)
int r;
struct omap_hwmod_ocp_if **h = NULL, **h_gp = NULL, **h_sham = NULL;
struct omap_hwmod_ocp_if **h_aes = NULL;
struct device_node *bus = NULL;
struct device_node *bus;
unsigned int rev;
omap_hwmod_init();
@ -3208,18 +3167,14 @@ int __init omap3xxx_hwmod_init(void)
if (h_sham && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "sham")) {
r = omap_hwmod_register_links(h_sham);
if (r < 0) {
of_node_put(bus);
return r;
}
if (r < 0)
goto put_node;
}
if (h_aes && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "aes")) {
r = omap_hwmod_register_links(h_aes);
if (r < 0) {
of_node_put(bus);
return r;
}
if (r < 0)
goto put_node;
}
of_node_put(bus);
@ -3270,4 +3225,8 @@ int __init omap3xxx_hwmod_init(void)
r = omap_hwmod_register_links(omap3xxx_dss_hwmod_ocp_ifs);
return r;
put_node:
of_node_put(bus);
return r;
}

548
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View File

File diff suppressed because it is too large Load Diff

20
arch/arm/mach-omap2/omap_hwmod_54xx_data.c
View File

@ -275,20 +275,10 @@ static struct omap_dma_dev_attr dma_dev_attr = {
};
/* dma_system */
static struct omap_hwmod_irq_info omap54xx_dma_system_irqs[] = {
{ .name = "0", .irq = 12 + OMAP54XX_IRQ_GIC_START },
{ .name = "1", .irq = 13 + OMAP54XX_IRQ_GIC_START },
{ .name = "2", .irq = 14 + OMAP54XX_IRQ_GIC_START },
{ .name = "3", .irq = 15 + OMAP54XX_IRQ_GIC_START },
{ .irq = -1 }
};
static struct omap_hwmod omap54xx_dma_system_hwmod = {
.name = "dma_system",
.class = &omap54xx_dma_hwmod_class,
.clkdm_name = "dma_clkdm",
.mpu_irqs = omap54xx_dma_system_irqs,
.xlate_irq = omap4_xlate_irq,
.main_clk = "l3_iclk_div",
.prcm = {
.omap4 = {
@ -2255,21 +2245,11 @@ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__counter_32k = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space omap54xx_dma_system_addrs[] = {
{
.pa_start = 0x4a056000,
.pa_end = 0x4a056fff,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_cfg -> dma_system */
static struct omap_hwmod_ocp_if omap54xx_l4_cfg__dma_system = {
.master = &omap54xx_l4_cfg_hwmod,
.slave = &omap54xx_dma_system_hwmod,
.clk = "l4_root_clk_div",
.addr = omap54xx_dma_system_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

57
arch/arm/mach-omap2/omap_hwmod_7xx_data.c
View File

@ -572,11 +572,6 @@ static struct omap_hwmod_class dra7xx_dss_hwmod_class = {
};
/* dss */
static struct omap_hwmod_dma_info dra7xx_dss_sdma_reqs[] = {
{ .dma_req = 75 + DRA7XX_DMA_REQ_START },
{ .dma_req = -1 }
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
{ .role = "dss_clk", .clk = "dss_dss_clk" },
{ .role = "hdmi_phy_clk", .clk = "dss_48mhz_clk" },
@ -592,7 +587,6 @@ static struct omap_hwmod dra7xx_dss_hwmod = {
.class = &dra7xx_dss_hwmod_class,
.clkdm_name = "dss_clkdm",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.sdma_reqs = dra7xx_dss_sdma_reqs,
.main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
@ -2995,21 +2989,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per2__dcan2 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space dra7xx_dma_system_addrs[] = {
{
.pa_start = 0x4a056000,
.pa_end = 0x4a056fff,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_cfg -> dma_system */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__dma_system = {
.master = &dra7xx_l4_cfg_hwmod,
.slave = &dra7xx_dma_system_hwmod,
.clk = "l3_iclk_div",
.addr = dra7xx_dma_system_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -3253,21 +3237,11 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space dra7xx_hdq1w_addrs[] = {
{
.pa_start = 0x480b2000,
.pa_end = 0x480b201f,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_per1 -> hdq1w */
static struct omap_hwmod_ocp_if dra7xx_l4_per1__hdq1w = {
.master = &dra7xx_l4_per1_hwmod,
.slave = &dra7xx_hdq1w_hwmod,
.clk = "l3_iclk_div",
.addr = dra7xx_hdq1w_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -3551,58 +3525,27 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per3__rtcss = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space dra7xx_sata_addrs[] = {
{
.name = "sysc",
.pa_start = 0x4a141100,
.pa_end = 0x4a141107,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_cfg -> sata */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = {
.master = &dra7xx_l4_cfg_hwmod,
.slave = &dra7xx_sata_hwmod,
.clk = "l3_iclk_div",
.addr = dra7xx_sata_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space dra7xx_smartreflex_core_addrs[] = {
{
.pa_start = 0x4a0dd000,
.pa_end = 0x4a0dd07f,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_cfg -> smartreflex_core */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_core = {
.master = &dra7xx_l4_cfg_hwmod,
.slave = &dra7xx_smartreflex_core_hwmod,
.clk = "l4_root_clk_div",
.addr = dra7xx_smartreflex_core_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space dra7xx_smartreflex_mpu_addrs[] = {
{
.pa_start = 0x4a0d9000,
.pa_end = 0x4a0d907f,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_cfg -> smartreflex_mpu */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_mpu = {
.master = &dra7xx_l4_cfg_hwmod,
.slave = &dra7xx_smartreflex_mpu_hwmod,
.clk = "l4_root_clk_div",
.addr = dra7xx_smartreflex_mpu_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

44
arch/arm/mach-omap2/omap_hwmod_81xx_data.c
View File

@ -1260,15 +1260,6 @@ static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tpcc = {
.user = OCP_USER_MPU,
};
static struct omap_hwmod_addr_space dm81xx_tptc0_addr_space[] = {
{
.pa_start = 0x49800000,
.pa_end = 0x49800000 + SZ_8K - 1,
.flags = ADDR_TYPE_RT,
},
{ },
};
static struct omap_hwmod_class dm81xx_tptc0_hwmod_class = {
.name = "tptc0",
};
@ -1290,7 +1281,6 @@ static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc0 = {
.master = &dm81xx_alwon_l3_fast_hwmod,
.slave = &dm81xx_tptc0_hwmod,
.clk = "sysclk4_ck",
.addr = dm81xx_tptc0_addr_space,
.user = OCP_USER_MPU,
};
@ -1298,19 +1288,9 @@ static struct omap_hwmod_ocp_if dm81xx_tptc0__alwon_l3_fast = {
.master = &dm81xx_tptc0_hwmod,
.slave = &dm81xx_alwon_l3_fast_hwmod,
.clk = "sysclk4_ck",
.addr = dm81xx_tptc0_addr_space,
.user = OCP_USER_MPU,
};
static struct omap_hwmod_addr_space dm81xx_tptc1_addr_space[] = {
{
.pa_start = 0x49900000,
.pa_end = 0x49900000 + SZ_8K - 1,
.flags = ADDR_TYPE_RT,
},
{ },
};
static struct omap_hwmod_class dm81xx_tptc1_hwmod_class = {
.name = "tptc1",
};
@ -1332,7 +1312,6 @@ static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc1 = {
.master = &dm81xx_alwon_l3_fast_hwmod,
.slave = &dm81xx_tptc1_hwmod,
.clk = "sysclk4_ck",
.addr = dm81xx_tptc1_addr_space,
.user = OCP_USER_MPU,
};
@ -1340,19 +1319,9 @@ static struct omap_hwmod_ocp_if dm81xx_tptc1__alwon_l3_fast = {
.master = &dm81xx_tptc1_hwmod,
.slave = &dm81xx_alwon_l3_fast_hwmod,
.clk = "sysclk4_ck",
.addr = dm81xx_tptc1_addr_space,
.user = OCP_USER_MPU,
};
static struct omap_hwmod_addr_space dm81xx_tptc2_addr_space[] = {
{
.pa_start = 0x49a00000,
.pa_end = 0x49a00000 + SZ_8K - 1,
.flags = ADDR_TYPE_RT,
},
{ },
};
static struct omap_hwmod_class dm81xx_tptc2_hwmod_class = {
.name = "tptc2",
};
@ -1374,7 +1343,6 @@ static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc2 = {
.master = &dm81xx_alwon_l3_fast_hwmod,
.slave = &dm81xx_tptc2_hwmod,
.clk = "sysclk4_ck",
.addr = dm81xx_tptc2_addr_space,
.user = OCP_USER_MPU,
};
@ -1382,19 +1350,9 @@ static struct omap_hwmod_ocp_if dm81xx_tptc2__alwon_l3_fast = {
.master = &dm81xx_tptc2_hwmod,
.slave = &dm81xx_alwon_l3_fast_hwmod,
.clk = "sysclk4_ck",
.addr = dm81xx_tptc2_addr_space,
.user = OCP_USER_MPU,
};
static struct omap_hwmod_addr_space dm81xx_tptc3_addr_space[] = {
{
.pa_start = 0x49b00000,
.pa_end = 0x49b00000 + SZ_8K - 1,
.flags = ADDR_TYPE_RT,
},
{ },
};
static struct omap_hwmod_class dm81xx_tptc3_hwmod_class = {
.name = "tptc3",
};
@ -1416,7 +1374,6 @@ static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc3 = {
.master = &dm81xx_alwon_l3_fast_hwmod,
.slave = &dm81xx_tptc3_hwmod,
.clk = "sysclk4_ck",
.addr = dm81xx_tptc3_addr_space,
.user = OCP_USER_MPU,
};
@ -1424,7 +1381,6 @@ static struct omap_hwmod_ocp_if dm81xx_tptc3__alwon_l3_fast = {
.master = &dm81xx_tptc3_hwmod,
.slave = &dm81xx_alwon_l3_fast_hwmod,
.clk = "sysclk4_ck",
.addr = dm81xx_tptc3_addr_space,
.user = OCP_USER_MPU,
};

41
arch/arm/mach-omap2/omap_hwmod_common_data.h
View File

@ -18,9 +18,6 @@
#include "common.h"
#include "display.h"
/* Common address space across OMAP2xxx/3xxx */
extern struct omap_hwmod_addr_space omap2_dma_system_addrs[];
/* Common IP block data across OMAP2xxx */
extern struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr;
extern struct omap_hwmod omap2xxx_l3_main_hwmod;
@ -89,44 +86,6 @@ extern struct omap_hwmod_ocp_if omap2xxx_l4_core__rng;
extern struct omap_hwmod_ocp_if omap2xxx_l4_core__sham;
extern struct omap_hwmod_ocp_if omap2xxx_l4_core__aes;
/* Common IP block data */
extern struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[];
extern struct omap_hwmod_dma_info omap2_uart2_sdma_reqs[];
extern struct omap_hwmod_dma_info omap2_uart3_sdma_reqs[];
extern struct omap_hwmod_dma_info omap2_i2c1_sdma_reqs[];
extern struct omap_hwmod_dma_info omap2_i2c2_sdma_reqs[];
extern struct omap_hwmod_dma_info omap2_mcspi1_sdma_reqs[];
extern struct omap_hwmod_dma_info omap2_mcspi2_sdma_reqs[];
extern struct omap_hwmod_dma_info omap2_mcbsp1_sdma_reqs[];
extern struct omap_hwmod_dma_info omap2_mcbsp2_sdma_reqs[];
/* Common IP block data on OMAP2430/OMAP3 */
extern struct omap_hwmod_dma_info omap2_mcbsp3_sdma_reqs[];
/* Common IP block data across OMAP2/3 */
extern struct omap_hwmod_irq_info omap2_timer1_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_timer2_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_timer3_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_timer4_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_timer5_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_timer6_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_timer7_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_timer8_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_timer9_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_timer10_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_timer11_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_uart2_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_dispc_irqs[];
extern struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_dma_system_irqs[];
extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[];
extern struct omap_hwmod_addr_space omap2xxx_timer12_addrs[];
extern struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[];
/* OMAP hwmod classes - forward declarations */
extern struct omap_hwmod_class l3_hwmod_class;
extern struct omap_hwmod_class l4_hwmod_class;

Some files were not shown because too many files have changed in this diff Show More