mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-25 21:24:08 +08:00
net: macb: Added ZynqMP-specific initialization
The GEM controllers on ZynqMP were missing some initialization steps which are required in some cases when using SGMII mode, which uses the PS-GTR transceivers managed by the phy-zynqmp driver. The GEM core appears to need a hardware-level reset in order to work properly in SGMII mode in cases where the GT reference clock was not present at initial power-on. This can be done using a reset mapped to the zynqmp-reset driver in the device tree. Also, when in SGMII mode, the GEM driver needs to ensure the PHY is initialized and powered on. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
f4ea385a16
commit
8b73fa3ae0
@ -12,6 +12,7 @@
|
||||
#include <linux/ptp_clock_kernel.h>
|
||||
#include <linux/net_tstamp.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/phy/phy.h>
|
||||
|
||||
#if defined(CONFIG_ARCH_DMA_ADDR_T_64BIT) || defined(CONFIG_MACB_USE_HWSTAMP)
|
||||
#define MACB_EXT_DESC
|
||||
@ -1291,6 +1292,9 @@ struct macb {
|
||||
u32 wol;
|
||||
|
||||
struct macb_ptp_info *ptp_info; /* macb-ptp interface */
|
||||
|
||||
struct phy *sgmii_phy; /* for ZynqMP SGMII mode */
|
||||
|
||||
#ifdef MACB_EXT_DESC
|
||||
uint8_t hw_dma_cap;
|
||||
#endif
|
||||
|
@ -34,7 +34,9 @@
|
||||
#include <linux/udp.h>
|
||||
#include <linux/tcp.h>
|
||||
#include <linux/iopoll.h>
|
||||
#include <linux/phy/phy.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/reset.h>
|
||||
#include "macb.h"
|
||||
|
||||
/* This structure is only used for MACB on SiFive FU540 devices */
|
||||
@ -2739,10 +2741,14 @@ static int macb_open(struct net_device *dev)
|
||||
|
||||
macb_init_hw(bp);
|
||||
|
||||
err = macb_phylink_connect(bp);
|
||||
err = phy_power_on(bp->sgmii_phy);
|
||||
if (err)
|
||||
goto reset_hw;
|
||||
|
||||
err = macb_phylink_connect(bp);
|
||||
if (err)
|
||||
goto phy_off;
|
||||
|
||||
netif_tx_start_all_queues(dev);
|
||||
|
||||
if (bp->ptp_info)
|
||||
@ -2750,6 +2756,9 @@ static int macb_open(struct net_device *dev)
|
||||
|
||||
return 0;
|
||||
|
||||
phy_off:
|
||||
phy_power_off(bp->sgmii_phy);
|
||||
|
||||
reset_hw:
|
||||
macb_reset_hw(bp);
|
||||
for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue)
|
||||
@ -2775,6 +2784,8 @@ static int macb_close(struct net_device *dev)
|
||||
phylink_stop(bp->phylink);
|
||||
phylink_disconnect_phy(bp->phylink);
|
||||
|
||||
phy_power_off(bp->sgmii_phy);
|
||||
|
||||
spin_lock_irqsave(&bp->lock, flags);
|
||||
macb_reset_hw(bp);
|
||||
netif_carrier_off(dev);
|
||||
@ -4544,13 +4555,55 @@ static const struct macb_config np4_config = {
|
||||
.usrio = &macb_default_usrio,
|
||||
};
|
||||
|
||||
static int zynqmp_init(struct platform_device *pdev)
|
||||
{
|
||||
struct net_device *dev = platform_get_drvdata(pdev);
|
||||
struct macb *bp = netdev_priv(dev);
|
||||
int ret;
|
||||
|
||||
if (bp->phy_interface == PHY_INTERFACE_MODE_SGMII) {
|
||||
/* Ensure PS-GTR PHY device used in SGMII mode is ready */
|
||||
bp->sgmii_phy = devm_phy_get(&pdev->dev, "sgmii-phy");
|
||||
|
||||
if (IS_ERR(bp->sgmii_phy)) {
|
||||
ret = PTR_ERR(bp->sgmii_phy);
|
||||
dev_err_probe(&pdev->dev, ret,
|
||||
"failed to get PS-GTR PHY\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = phy_init(bp->sgmii_phy);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "failed to init PS-GTR PHY: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
/* Fully reset GEM controller at hardware level using zynqmp-reset driver,
|
||||
* if mapped in device tree.
|
||||
*/
|
||||
ret = device_reset_optional(&pdev->dev);
|
||||
if (ret) {
|
||||
dev_err_probe(&pdev->dev, ret, "failed to reset controller");
|
||||
phy_exit(bp->sgmii_phy);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = macb_init(pdev);
|
||||
if (ret)
|
||||
phy_exit(bp->sgmii_phy);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct macb_config zynqmp_config = {
|
||||
.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE |
|
||||
MACB_CAPS_JUMBO |
|
||||
MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH,
|
||||
.dma_burst_length = 16,
|
||||
.clk_init = macb_clk_init,
|
||||
.init = macb_init,
|
||||
.init = zynqmp_init,
|
||||
.jumbo_max_len = 10240,
|
||||
.usrio = &macb_default_usrio,
|
||||
};
|
||||
@ -4767,7 +4820,7 @@ static int macb_probe(struct platform_device *pdev)
|
||||
|
||||
err = macb_mii_init(bp);
|
||||
if (err)
|
||||
goto err_out_free_netdev;
|
||||
goto err_out_phy_exit;
|
||||
|
||||
netif_carrier_off(dev);
|
||||
|
||||
@ -4792,6 +4845,9 @@ err_out_unregister_mdio:
|
||||
mdiobus_unregister(bp->mii_bus);
|
||||
mdiobus_free(bp->mii_bus);
|
||||
|
||||
err_out_phy_exit:
|
||||
phy_exit(bp->sgmii_phy);
|
||||
|
||||
err_out_free_netdev:
|
||||
free_netdev(dev);
|
||||
|
||||
@ -4813,6 +4869,7 @@ static int macb_remove(struct platform_device *pdev)
|
||||
|
||||
if (dev) {
|
||||
bp = netdev_priv(dev);
|
||||
phy_exit(bp->sgmii_phy);
|
||||
mdiobus_unregister(bp->mii_bus);
|
||||
mdiobus_free(bp->mii_bus);
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user