From 883dfe8ae6c7dfe4b97151094459b8a32665a168 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 1 Sep 2017 12:21:49 -0400 Subject: [PATCH] media: dvb uAPI docs: minor editorial changes Do minor editorial changes to improve documentation readability: - mark literals as such; - add table markups to hint sizes; - define what PES means; - instead of hardcoding devnode numbers to zero (like adapter0/) use a question mark, to indicate that multiple devnodes may exist; - add cross-references where useful. Signed-off-by: Mauro Carvalho Chehab --- Documentation/media/uapi/dvb/ca-fopen.rst | 25 ++++++++++--------- Documentation/media/uapi/dvb/dmx-add-pid.rst | 4 +-- Documentation/media/uapi/dvb/dmx-fclose.rst | 5 ++-- Documentation/media/uapi/dvb/dmx-fopen.rst | 23 +++++++++-------- Documentation/media/uapi/dvb/dmx-fread.rst | 8 +++--- Documentation/media/uapi/dvb/dmx-fwrite.rst | 4 +-- Documentation/media/uapi/dvb/dmx-get-stc.rst | 13 +++++----- .../media/uapi/dvb/dmx-remove-pid.rst | 4 +-- .../media/uapi/dvb/dmx-set-buffer-size.rst | 2 +- .../media/uapi/dvb/dmx-set-filter.rst | 4 +-- Documentation/media/uapi/dvb/dmx-stop.rst | 4 +-- .../media/uapi/dvb/dvb-fe-read-status.rst | 2 +- .../uapi/dvb/fe-diseqc-send-master-cmd.rst | 3 ++- Documentation/media/uapi/dvb/fe-get-info.rst | 4 +-- .../uapi/dvb/fe-set-frontend-tune-mode.rst | 4 +-- Documentation/media/uapi/dvb/fe-type-t.rst | 2 +- 16 files changed, 59 insertions(+), 52 deletions(-) diff --git a/Documentation/media/uapi/dvb/ca-fopen.rst b/Documentation/media/uapi/dvb/ca-fopen.rst index a03a01abf3da..056c71b53a70 100644 --- a/Documentation/media/uapi/dvb/ca-fopen.rst +++ b/Documentation/media/uapi/dvb/ca-fopen.rst @@ -28,20 +28,20 @@ Arguments ``flags`` A bit-wise OR of the following flags: +.. tabularcolumns:: |p{2.5cm}|p{15.0cm}| + .. flat-table:: :header-rows: 0 :stub-columns: 0 + :widths: 1 16 - - - - O_RDONLY + - - ``O_RDONLY`` - read-only access - - - - O_RDWR + - - ``O_RDWR`` - read/write access - - - - O_NONBLOCK + - - ``O_NONBLOCK`` - open in non-blocking mode (blocking mode is the default) @@ -52,15 +52,16 @@ Description This system call opens a named ca device (e.g. ``/dev/dvb/adapter?/ca?``) for subsequent use. -When an open() call has succeeded, the device will be ready for use. The +When an ``open()`` call has succeeded, the device will be ready for use. The significance of blocking or non-blocking mode is described in the documentation for functions where there is a difference. It does not -affect the semantics of the open() call itself. A device opened in +affect the semantics of the ``open()`` call itself. A device opened in blocking mode can later be put into non-blocking mode (and vice versa) -using the F_SETFL command of the fcntl system call. This is a standard -system call, documented in the Linux manual page for fcntl. Only one -user can open the CA Device in O_RDWR mode. All other attempts to open -the device in this mode will fail, and an error code will be returned. +using the ``F_SETFL`` command of the ``fcntl`` system call. This is a +standard system call, documented in the Linux manual page for fcntl. +Only one user can open the CA Device in ``O_RDWR`` mode. All other +attempts to open the device in this mode will fail, and an error code +will be returned. Return Value diff --git a/Documentation/media/uapi/dvb/dmx-add-pid.rst b/Documentation/media/uapi/dvb/dmx-add-pid.rst index 0aab2fcaacab..4d5632dfb43e 100644 --- a/Documentation/media/uapi/dvb/dmx-add-pid.rst +++ b/Documentation/media/uapi/dvb/dmx-add-pid.rst @@ -33,8 +33,8 @@ Description ----------- This ioctl call allows to add multiple PIDs to a transport stream filter -previously set up with DMX_SET_PES_FILTER and output equal to -DMX_OUT_TSDEMUX_TAP. +previously set up with :ref:`DMX_SET_PES_FILTER` and output equal to +:c:type:`DMX_OUT_TSDEMUX_TAP `. Return Value diff --git a/Documentation/media/uapi/dvb/dmx-fclose.rst b/Documentation/media/uapi/dvb/dmx-fclose.rst index 8693501dbd4d..578e929f4bde 100644 --- a/Documentation/media/uapi/dvb/dmx-fclose.rst +++ b/Documentation/media/uapi/dvb/dmx-fclose.rst @@ -23,13 +23,14 @@ Arguments --------- ``fd`` - File descriptor returned by a previous call to :c:func:`open() `. + File descriptor returned by a previous call to + :c:func:`open() `. Description ----------- This system call deactivates and deallocates a filter that was -previously allocated via the open() call. +previously allocated via the :c:func:`open() ` call. Return Value diff --git a/Documentation/media/uapi/dvb/dmx-fopen.rst b/Documentation/media/uapi/dvb/dmx-fopen.rst index 3dee019522db..55628a18ba67 100644 --- a/Documentation/media/uapi/dvb/dmx-fopen.rst +++ b/Documentation/media/uapi/dvb/dmx-fopen.rst @@ -27,20 +27,23 @@ Arguments ``flags`` A bit-wise OR of the following flags: +.. tabularcolumns:: |p{2.5cm}|p{15.0cm}| + .. flat-table:: :header-rows: 0 :stub-columns: 0 + :widths: 1 16 - - - O_RDONLY + - ``O_RDONLY`` - read-only access - - - O_RDWR + - ``O_RDWR`` - read/write access - - - O_NONBLOCK + - ``O_NONBLOCK`` - open in non-blocking mode (blocking mode is the default) @@ -48,22 +51,22 @@ Arguments Description ----------- -This system call, used with a device name of /dev/dvb/adapter0/demux0, +This system call, used with a device name of ``/dev/dvb/adapter?/demux?``, allocates a new filter and returns a handle which can be used for subsequent control of that filter. This call has to be made for each filter to be used, i.e. every returned file descriptor is a reference to -a single filter. /dev/dvb/adapter0/dvr0 is a logical device to be used +a single filter. ``/dev/dvb/adapter?/dvr?`` is a logical device to be used for retrieving Transport Streams for digital video recording. When reading from this device a transport stream containing the packets from all PES filters set in the corresponding demux device -(/dev/dvb/adapter0/demux0) having the output set to DMX_OUT_TS_TAP. A -recorded Transport Stream is replayed by writing to this device. +(``/dev/dvb/adapter?/demux?``) having the output set to ``DMX_OUT_TS_TAP``. +A recorded Transport Stream is replayed by writing to this device. The significance of blocking or non-blocking mode is described in the documentation for functions where there is a difference. It does not -affect the semantics of the open() call itself. A device opened in -blocking mode can later be put into non-blocking mode (and vice versa) -using the F_SETFL command of the fcntl system call. +affect the semantics of the ``open()`` call itself. A device opened +in blocking mode can later be put into non-blocking mode (and vice versa) +using the ``F_SETFL`` command of the fcntl system call. Return Value diff --git a/Documentation/media/uapi/dvb/dmx-fread.rst b/Documentation/media/uapi/dvb/dmx-fread.rst index 36ba851bc0af..488bdc4ba178 100644 --- a/Documentation/media/uapi/dvb/dmx-fread.rst +++ b/Documentation/media/uapi/dvb/dmx-fread.rst @@ -33,10 +33,10 @@ Arguments Description ----------- -This system call returns filtered data, which might be section or PES -data. The filtered data is transferred from the driver’s internal -circular buffer to buf. The maximum amount of data to be transferred is -implied by count. +This system call returns filtered data, which might be section or Packetized +Elementary Stream (PES) data. The filtered data is transferred from +the driver’s internal circular buffer to ``buf``. The maximum amount of data +to be transferred is implied by count. .. note:: diff --git a/Documentation/media/uapi/dvb/dmx-fwrite.rst b/Documentation/media/uapi/dvb/dmx-fwrite.rst index 77f138f6234f..519e5733e53b 100644 --- a/Documentation/media/uapi/dvb/dmx-fwrite.rst +++ b/Documentation/media/uapi/dvb/dmx-fwrite.rst @@ -34,10 +34,10 @@ Description ----------- This system call is only provided by the logical device -/dev/dvb/adapter0/dvr0, associated with the physical demux device that +``/dev/dvb/adapter?/dvr?``, associated with the physical demux device that provides the actual DVR functionality. It is used for replay of a digitally recorded Transport Stream. Matching filters have to be defined -in the corresponding physical demux device, /dev/dvb/adapter0/demux0. +in the corresponding physical demux device, ``/dev/dvb/adapter?/demux?``. The amount of data to be transferred is implied by count. diff --git a/Documentation/media/uapi/dvb/dmx-get-stc.rst b/Documentation/media/uapi/dvb/dmx-get-stc.rst index 6d5d069d4e6c..604031f7904b 100644 --- a/Documentation/media/uapi/dvb/dmx-get-stc.rst +++ b/Documentation/media/uapi/dvb/dmx-get-stc.rst @@ -25,18 +25,19 @@ Arguments File descriptor returned by :c:func:`open() `. ``stc`` - Pointer to the location where the stc is to be stored. + Pointer to :c:type:`dmx_stc` where the stc data is to be stored. Description ----------- This ioctl call returns the current value of the system time counter -(which is driven by a PES filter of type DMX_PES_PCR). Some hardware -supports more than one STC, so you must specify which one by setting the -num field of stc before the ioctl (range 0...n). The result is returned -in form of a ratio with a 64 bit numerator and a 32 bit denominator, so -the real 90kHz STC value is stc->stc / stc->base . +(which is driven by a PES filter of type :c:type:`DMX_PES_PCR `). +Some hardware supports more than one STC, so you must specify which one by +setting the :c:type:`num ` field of stc before the ioctl (range 0...n). +The result is returned in form of a ratio with a 64 bit numerator +and a 32 bit denominator, so the real 90kHz STC value is +``stc->stc / stc->base``. Return Value diff --git a/Documentation/media/uapi/dvb/dmx-remove-pid.rst b/Documentation/media/uapi/dvb/dmx-remove-pid.rst index 1faa40ab11bd..456cc2ded2c0 100644 --- a/Documentation/media/uapi/dvb/dmx-remove-pid.rst +++ b/Documentation/media/uapi/dvb/dmx-remove-pid.rst @@ -34,8 +34,8 @@ Description This ioctl call allows to remove a PID when multiple PIDs are set on a transport stream filter, e. g. a filter previously set up with output -equal to DMX_OUT_TSDEMUX_TAP, created via either -DMX_SET_PES_FILTER or DMX_ADD_PID. +equal to :c:type:`DMX_OUT_TSDEMUX_TAP `, created via either +:ref:`DMX_SET_PES_FILTER` or :ref:`DMX_ADD_PID`. Return Value diff --git a/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst b/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst index a659dd7ca7e6..74fd076a9b90 100644 --- a/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst +++ b/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst @@ -33,7 +33,7 @@ Description This ioctl call is used to set the size of the circular buffer used for filtered data. The default size is two maximum sized sections, i.e. if -this function is not called a buffer size of 2 \* 4096 bytes will be +this function is not called a buffer size of ``2 * 4096`` bytes will be used. diff --git a/Documentation/media/uapi/dvb/dmx-set-filter.rst b/Documentation/media/uapi/dvb/dmx-set-filter.rst index d6ee52321717..88594b8d3846 100644 --- a/Documentation/media/uapi/dvb/dmx-set-filter.rst +++ b/Documentation/media/uapi/dvb/dmx-set-filter.rst @@ -40,8 +40,8 @@ state whether a section should be CRC-checked, whether the filter should be a ”one-shot” filter, i.e. if the filtering operation should be stopped after the first section is received, and whether the filtering operation should be started immediately (without waiting for a -DMX_START ioctl call). If a filter was previously set-up, this filter -will be canceled, and the receive buffer will be flushed. +:ref:`DMX_START` ioctl call). If a filter was previously set-up, this +filter will be canceled, and the receive buffer will be flushed. Return Value diff --git a/Documentation/media/uapi/dvb/dmx-stop.rst b/Documentation/media/uapi/dvb/dmx-stop.rst index 5f4bf63868c1..6d9c927bcd5f 100644 --- a/Documentation/media/uapi/dvb/dmx-stop.rst +++ b/Documentation/media/uapi/dvb/dmx-stop.rst @@ -29,8 +29,8 @@ Description ----------- This ioctl call is used to stop the actual filtering operation defined -via the ioctl calls DMX_SET_FILTER or DMX_SET_PES_FILTER and -started via the DMX_START command. +via the ioctl calls :ref:`DMX_SET_FILTER` or :ref:`DMX_SET_PES_FILTER` and +started via the :ref:`DMX_START` command. Return Value diff --git a/Documentation/media/uapi/dvb/dvb-fe-read-status.rst b/Documentation/media/uapi/dvb/dvb-fe-read-status.rst index 76c20612b274..212f032cad8b 100644 --- a/Documentation/media/uapi/dvb/dvb-fe-read-status.rst +++ b/Documentation/media/uapi/dvb/dvb-fe-read-status.rst @@ -20,6 +20,6 @@ Signal statistics are provided via .. note:: Most statistics require the demodulator to be fully locked - (e. g. with FE_HAS_LOCK bit set). See + (e. g. with :c:type:`FE_HAS_LOCK ` bit set). See :ref:`Frontend statistics indicators ` for more details. diff --git a/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst b/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst index d274be7316ff..6bd3994edfc2 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst @@ -33,7 +33,8 @@ Arguments Description =========== -Sends the DiSEqC command pointed by ``argp`` to the antenna subsystem. +Sends the DiSEqC command pointed by :c:type:`dvb_diseqc_master_cmd` +to the antenna subsystem. Return Value ============ diff --git a/Documentation/media/uapi/dvb/fe-get-info.rst b/Documentation/media/uapi/dvb/fe-get-info.rst index 9e5a7a27e158..49307c0abfee 100644 --- a/Documentation/media/uapi/dvb/fe-get-info.rst +++ b/Documentation/media/uapi/dvb/fe-get-info.rst @@ -34,8 +34,8 @@ Arguments Description =========== -All Digital TV frontend devices support the ``FE_GET_INFO`` ioctl. It is used -to identify kernel devices compatible with this specification and to +All Digital TV frontend devices support the :ref:`FE_GET_INFO` ioctl. It is +used to identify kernel devices compatible with this specification and to obtain information about driver and hardware capabilities. The ioctl takes a pointer to dvb_frontend_info which is filled by the driver. When the driver is not compatible with this specification the ioctl diff --git a/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst b/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst index 37a9cef1b6bd..3c4bc179b313 100644 --- a/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst +++ b/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst @@ -30,7 +30,7 @@ Arguments - 0 - normal tune mode - - FE_TUNE_MODE_ONESHOT - When set, this flag will disable any + - ``FE_TUNE_MODE_ONESHOT`` - When set, this flag will disable any zigzagging or other "normal" tuning behaviour. Additionally, there will be no automatic monitoring of the lock status, and hence no frontend events will be generated. If a frontend device @@ -42,7 +42,7 @@ Description =========== Allow setting tuner mode flags to the frontend, between 0 (normal) or -FE_TUNE_MODE_ONESHOT mode +``FE_TUNE_MODE_ONESHOT`` mode Return Value diff --git a/Documentation/media/uapi/dvb/fe-type-t.rst b/Documentation/media/uapi/dvb/fe-type-t.rst index 548b965188d0..dee32ae104d7 100644 --- a/Documentation/media/uapi/dvb/fe-type-t.rst +++ b/Documentation/media/uapi/dvb/fe-type-t.rst @@ -78,7 +78,7 @@ parameter. In the old days, struct :c:type:`dvb_frontend_info` used to contain ``fe_type_t`` field to indicate the delivery systems, -filled with either FE_QPSK, FE_QAM, FE_OFDM or FE_ATSC. While this +filled with either ``FE_QPSK, FE_QAM, FE_OFDM`` or ``FE_ATSC``. While this is still filled to keep backward compatibility, the usage of this field is deprecated, as it can report just one delivery system, but some devices support multiple delivery systems. Please use