arm64: dts: qcom: sm8150: Add support for SDC2

Add support for SDC2 which can be used to interface uSD card.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220403144151.92572-2-bhupesh.sharma@linaro.org
This commit is contained in:
Bhupesh Sharma 2022-04-03 20:11:50 +05:30 committed by Bjorn Andersson
parent 6b834df839
commit 876644c760

View File

@ -3515,6 +3515,51 @@
};
};
sdhc_2: sdhci@8804000 {
compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "core", "xo";
iommus = <&apps_smmu 0x4a0 0x0>;
qcom,dll-config = <0x0007642c>;
qcom,ddr-config = <0x80040868>;
power-domains = <&rpmhpd 0>;
operating-points-v2 = <&sdhc2_opp_table>;
status = "disabled";
sdhc2_opp_table: sdhc2-opp-table {
compatible = "operating-points-v2";
opp-19200000 {
opp-hz = /bits/ 64 <19200000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-202000000 {
opp-hz = /bits/ 64 <202000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
};
};
dc_noc: interconnect@9160000 {
compatible = "qcom,sm8150-dc-noc";
reg = <0 0x09160000 0 0x3200>;