Merge branch 'pci/hotplug'

- Allow D3 only if Root Port can signal and wake from D3 so we don't miss
  hotplug events on AMD Yellow Carp (Mario Limonciello)

- Clean up hotplug include files to enable future powerpc cleanup
  (Christophe Leroy)

* pci/hotplug:
  PCI: hotplug: Clean up include files
  PCI/ACPI: Allow D3 only if Root Port can signal and wake from D3

drivers/pci/hotplug/pnv_php.c

@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
+#include <linux/of_fdt.h>
 
 #include <asm/opal.h>
 #include <asm/pnv-pci.h>

drivers/pci/hotplug/rpadlpar_core.c

@@ -15,6 +15,7 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/pci.h>
 #include <linux/string.h>
 #include <linux/vmalloc.h>

drivers/pci/hotplug/rpaphp_core.c

@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/of.h>
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
 #include <linux/smp.h>
@@ -20,6 +21,7 @@
 #include <asm/eeh.h>       /* for eeh_add_device() */
 #include <asm/rtas.h>		/* rtas_call */
 #include <asm/pci-bridge.h>	/* for pci_controller */
+#include <asm/prom.h>
 #include "../pci.h"		/* for pci_add_new_bus */
 				/* and pci_do_scan_bus */
 #include "rpaphp.h"

drivers/pci/hotplug/rpaphp_pci.c

@@ -8,6 +8,7 @@
  * Send feedback to <lxie@us.ibm.com>
  *
  */
+#include <linux/of.h>
 #include <linux/pci.h>
 #include <linux/string.h>
 

drivers/pci/hotplug/rpaphp_slot.c

@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/sysfs.h>
+#include <linux/of.h>
 #include <linux/pci.h>
 #include <linux/string.h>
 #include <linux/slab.h>

drivers/pci/pci-acpi.c

@@ -974,9 +974,11 @@ bool acpi_pci_power_manageable(struct pci_dev *dev)
 
 bool acpi_pci_bridge_d3(struct pci_dev *dev)
 {
-	const union acpi_object *obj;
-	struct acpi_device *adev;
 	struct pci_dev *rpdev;
+	struct acpi_device *adev;
+	acpi_status status;
+	unsigned long long state;
+	const union acpi_object *obj;
 
 	if (acpi_pci_disabled || !dev->is_hotplug_bridge)
 		return false;
@@ -985,12 +987,6 @@ bool acpi_pci_bridge_d3(struct pci_dev *dev)
 	if (acpi_pci_power_manageable(dev))
 		return true;
 
-	/*
-	 * The ACPI firmware will provide the device-specific properties through
-	 * _DSD configuration object. Look for the 'HotPlugSupportInD3' property
-	 * for the root port and if it is set we know the hierarchy behind it
-	 * supports D3 just fine.
-	 */
 	rpdev = pcie_find_root_port(dev);
 	if (!rpdev)
 		return false;
@@ -999,11 +995,34 @@ bool acpi_pci_bridge_d3(struct pci_dev *dev)
 	if (!adev)
 		return false;
 
-	if (acpi_dev_get_property(adev, "HotPlugSupportInD3",
-				   ACPI_TYPE_INTEGER, &obj) < 0)
+	/*
+	 * If the Root Port cannot signal wakeup signals at all, i.e., it
+	 * doesn't supply a wakeup GPE via _PRW, it cannot signal hotplug
+	 * events from low-power states including D3hot and D3cold.
+	 */
+	if (!adev->wakeup.flags.valid)
 		return false;
 
-	return obj->integer.value == 1;
+	/*
+	 * If the Root Port cannot wake itself from D3hot or D3cold, we
+	 * can't use D3.
+	 */
+	status = acpi_evaluate_integer(adev->handle, "_S0W", NULL, &state);
+	if (ACPI_SUCCESS(status) && state < ACPI_STATE_D3_HOT)
+		return false;
+
+	/*
+	 * The "HotPlugSupportInD3" property in a Root Port _DSD indicates
+	 * the Port can signal hotplug events while in D3.  We assume any
+	 * bridges *below* that Root Port can also signal hotplug events
+	 * while in D3.
+	 */
+	if (!acpi_dev_get_property(adev, "HotPlugSupportInD3",
+				   ACPI_TYPE_INTEGER, &obj) &&
+	    obj->integer.value == 1)
+		return true;
+
+	return false;
 }
 
 int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)