diff --git a/Documentation/hwmon/lm78 b/Documentation/hwmon/lm78 index 357086ed7f64..fd5dc7a19f0e 100644 --- a/Documentation/hwmon/lm78 +++ b/Documentation/hwmon/lm78 @@ -2,16 +2,11 @@ Kernel driver lm78 ================== Supported chips: - * National Semiconductor LM78 + * National Semiconductor LM78 / LM78-J Prefix: 'lm78' Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports) Datasheet: Publicly available at the National Semiconductor website http://www.national.com/ - * National Semiconductor LM78-J - Prefix: 'lm78-j' - Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports) - Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/ * National Semiconductor LM79 Prefix: 'lm79' Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports) diff --git a/Documentation/hwmon/w83792d b/Documentation/hwmon/w83792d new file mode 100644 index 000000000000..8171c285bb55 --- /dev/null +++ b/Documentation/hwmon/w83792d @@ -0,0 +1,174 @@ +Kernel driver w83792d +===================== + +Supported chips: + * Winbond W83792D + Prefix: 'w83792d' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: http://www.winbond.com.tw/E-WINBONDHTM/partner/PDFresult.asp?Pname=1035 + +Author: Chunhao Huang +Contact: DZShen + + +Module Parameters +----------------- + +* init int + (default 1) + Use 'init=0' to bypass initializing the chip. + Try this if your computer crashes when you load the module. + +* force_subclients=bus,caddr,saddr,saddr + This is used to force the i2c addresses for subclients of + a certain chip. Example usage is `force_subclients=0,0x2f,0x4a,0x4b' + to force the subclients of chip 0x2f on bus 0 to i2c addresses + 0x4a and 0x4b. + + +Description +----------- + +This driver implements support for the Winbond W83792AD/D. + +Detection of the chip can sometimes be foiled because it can be in an +internal state that allows no clean access (Bank with ID register is not +currently selected). If you know the address of the chip, use a 'force' +parameter; this will put it into a more well-behaved state first. + +The driver implements three temperature sensors, seven fan rotation speed +sensors, nine voltage sensors, and two automatic fan regulation +strategies called: Smart Fan I (Thermal Cruise mode) and Smart Fan II. +Automatic fan control mode is possible only for fan1-fan3. Fan4-fan7 can run +synchronized with selected fan (fan1-fan3). This functionality and manual PWM +control for fan4-fan7 is not yet implemented. + +Temperatures are measured in degrees Celsius and measurement resolution is 1 +degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when +the temperature gets higher than the Overtemperature Shutdown value; it stays +on until the temperature falls below the Hysteresis value. + +Fan rotation speeds are reported in RPM (rotations per minute). An alarm is +triggered if the rotation speed has dropped below a programmable limit. Fan +readings can be divided by a programmable divider (1, 2, 4, 8, 16, 32, 64 or +128) to give the readings more range or accuracy. + +Voltage sensors (also known as IN sensors) report their values in millivolts. +An alarm is triggered if the voltage has crossed a programmable minimum +or maximum limit. + +Alarms are provided as output from "realtime status register". Following bits +are defined: + +bit - alarm on: +0 - in0 +1 - in1 +2 - temp1 +3 - temp2 +4 - temp3 +5 - fan1 +6 - fan2 +7 - fan3 +8 - in2 +9 - in3 +10 - in4 +11 - in5 +12 - in6 +13 - VID change +14 - chassis +15 - fan7 +16 - tart1 +17 - tart2 +18 - tart3 +19 - in7 +20 - in8 +21 - fan4 +22 - fan5 +23 - fan6 + +Tart will be asserted while target temperature cannot be achieved after 3 minutes +of full speed rotation of corresponding fan. + +In addition to the alarms described above, there is a CHAS alarm on the chips +which triggers if your computer case is open (This one is latched, contrary +to realtime alarms). + +The chips only update values each 3 seconds; reading them more often will +do no harm, but will return 'old' values. + + +W83792D PROBLEMS +---------------- +Known problems: + - This driver is only for Winbond W83792D C version device, there + are also some motherboards with B version W83792D device. The + calculation method to in6-in7(measured value, limits) is a little + different between C and B version. C or B version can be identified + by CR[0x49h]. + - The function of vid and vrm has not been finished, because I'm NOT + very familiar with them. Adding support is welcome. +  - The function of chassis open detection needs more tests. + - If you have ASUS server board and chip was not found: Then you will + need to upgrade to latest (or beta) BIOS. If it does not help please + contact us. + +Fan control +----------- + +Manual mode +----------- + +Works as expected. You just need to specify desired PWM/DC value (fan speed) +in appropriate pwm# file. + +Thermal cruise +-------------- + +In this mode, W83792D provides the Smart Fan system to automatically control +fan speed to keep the temperatures of CPU and the system within specific +range. At first a wanted temperature and interval must be set. This is done +via thermal_cruise# file. The tolerance# file serves to create T +- tolerance +interval. The fan speed will be lowered as long as the current temperature +remains below the thermal_cruise# +- tolerance# value. Once the temperature +exceeds the high limit (T+tolerance), the fan will be turned on with a +specific speed set by pwm# and automatically controlled its PWM duty cycle +with the temperature varying. Three conditions may occur: + +(1) If the temperature still exceeds the high limit, PWM duty +cycle will increase slowly. + +(2) If the temperature goes below the high limit, but still above the low +limit (T-tolerance), the fan speed will be fixed at the current speed because +the temperature is in the target range. + +(3) If the temperature goes below the low limit, PWM duty cycle will decrease +slowly to 0 or a preset stop value until the temperature exceeds the low +limit. (The preset stop value handling is not yet implemented in driver) + +Smart Fan II +------------ + +W83792D also provides a special mode for fan. Four temperature points are +available. When related temperature sensors detects the temperature in preset +temperature region (sf2_point@_fan# +- tolerance#) it will cause fans to run +on programmed value from sf2_level@_fan#. You need to set four temperatures +for each fan. + + +/sys files +---------- + +pwm[1-3] - this file stores PWM duty cycle or DC value (fan speed) in range: + 0 (stop) to 255 (full) +pwm[1-3]_enable - this file controls mode of fan/temperature control: + * 0 Disabled + * 1 Manual mode + * 2 Smart Fan II + * 3 Thermal Cruise +pwm[1-3]_mode - Select PWM of DC mode + * 0 DC + * 1 PWM +thermal_cruise[1-3] - Selects the desired temperature for cruise (degC) +tolerance[1-3] - Value in degrees of Celsius (degC) for +- T +sf2_point[1-4]_fan[1-3] - four temperature points for each fan for Smart Fan II +sf2_level[1-3]_fan[1-3] - three PWM/DC levels for each fan for Smart Fan II diff --git a/Documentation/i2c/chips/max6875 b/Documentation/i2c/chips/max6875 index b02002898a09..96fec562a8e9 100644 --- a/Documentation/i2c/chips/max6875 +++ b/Documentation/i2c/chips/max6875 @@ -4,22 +4,13 @@ Kernel driver max6875 Supported chips: * Maxim MAX6874, MAX6875 Prefix: 'max6875' - Addresses scanned: 0x50, 0x52 + Addresses scanned: None (see below) Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6874-MAX6875.pdf Author: Ben Gardner -Module Parameters ------------------ - -* allow_write int - Set to non-zero to enable write permission: - *0: Read only - 1: Read and write - - Description ----------- @@ -33,34 +24,85 @@ registers. The Maxim MAX6874 is a similar, mostly compatible device, with more intputs and outputs: - vin gpi vout MAX6874 6 4 8 MAX6875 4 3 5 -MAX6874 chips can have four different addresses (as opposed to only two for -the MAX6875). The additional addresses (0x54 and 0x56) are not probed by -this driver by default, but the probe module parameter can be used if -needed. - -See the datasheet for details on how to program the EEPROM. +See the datasheet for more information. Sysfs entries ------------- -eeprom_user - 512 bytes of user-defined EEPROM space. Only writable if - allow_write was set and register 0x43 is 0. - -eeprom_config - 70 bytes of config EEPROM. Note that changes will not get - loaded into register space until a power cycle or device reset. - -reg_config - 70 bytes of register space. Any changes take affect immediately. +eeprom - 512 bytes of user-defined EEPROM space. General Remarks --------------- -A typical application will require that the EEPROMs be programmed once and -never altered afterwards. +Valid addresses for the MAX6875 are 0x50 and 0x52. +Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56. +The driver does not probe any address, so you must force the address. + +Example: +$ modprobe max6875 force=0,0x50 + +The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple +addresses. For example, for address 0x50, it also reserves 0x51. +The even-address instance is called 'max6875', the odd one is 'max6875 subclient'. + + +Programming the chip using i2c-dev +---------------------------------- + +Use the i2c-dev interface to access and program the chips. +Reads and writes are performed differently depending on the address range. + +The configuration registers are at addresses 0x00 - 0x45. +Use i2c_smbus_write_byte_data() to write a register and +i2c_smbus_read_byte_data() to read a register. +The command is the register number. + +Examples: +To write a 1 to register 0x45: + i2c_smbus_write_byte_data(fd, 0x45, 1); + +To read register 0x45: + value = i2c_smbus_read_byte_data(fd, 0x45); + + +The configuration EEPROM is at addresses 0x8000 - 0x8045. +The user EEPROM is at addresses 0x8100 - 0x82ff. + +Use i2c_smbus_write_word_data() to write a byte to EEPROM. + +The command is the upper byte of the address: 0x80, 0x81, or 0x82. +The data word is the lower part of the address or'd with data << 8. + cmd = address >> 8; + val = (address & 0xff) | (data << 8); + +Example: +To write 0x5a to address 0x8003: + i2c_smbus_write_word_data(fd, 0x80, 0x5a03); + + +Reading data from the EEPROM is a little more complicated. +Use i2c_smbus_write_byte_data() to set the read address and then +i2c_smbus_read_byte() or i2c_smbus_read_i2c_block_data() to read the data. + +Example: +To read data starting at offset 0x8100, first set the address: + i2c_smbus_write_byte_data(fd, 0x81, 0x00); + +And then read the data + value = i2c_smbus_read_byte(fd); + + or + + count = i2c_smbus_read_i2c_block_data(fd, 0x84, buffer); + +The block read should read 16 bytes. +0x84 is the block read command. + +See the datasheet for more details. diff --git a/Documentation/i2c/functionality b/Documentation/i2c/functionality index 8a78a95ae04e..41ffefbdc60c 100644 --- a/Documentation/i2c/functionality +++ b/Documentation/i2c/functionality @@ -115,7 +115,7 @@ CHECKING THROUGH /DEV If you try to access an adapter from a userspace program, you will have to use the /dev interface. You will still have to check whether the functionality you need is supported, of course. This is done using -the I2C_FUNCS ioctl. An example, adapted from the lm_sensors i2c_detect +the I2C_FUNCS ioctl. An example, adapted from the lm_sensors i2cdetect program, is below: int file; diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients index a7adbdd9ea8a..4849dfd6961c 100644 --- a/Documentation/i2c/porting-clients +++ b/Documentation/i2c/porting-clients @@ -1,4 +1,4 @@ -Revision 4, 2004-03-30 +Revision 5, 2005-07-29 Jean Delvare Greg KH @@ -17,20 +17,22 @@ yours for best results. Technical changes: -* [Includes] Get rid of "version.h". Replace with - . Includes typically look like that: +* [Includes] Get rid of "version.h" and . + Includes typically look like that: #include #include #include #include - #include - #include /* if you need VRM support */ + #include /* for hardware monitoring drivers */ + #include + #include /* if you need VRM support */ #include /* if you have I/O operations */ Please respect this inclusion order. Some extra headers may be required for a given driver (e.g. "lm75.h"). -* [Addresses] SENSORS_I2C_END becomes I2C_CLIENT_END, SENSORS_ISA_END - becomes I2C_CLIENT_ISA_END. +* [Addresses] SENSORS_I2C_END becomes I2C_CLIENT_END, ISA addresses + are no more handled by the i2c core. + SENSORS_INSMOD_ becomes I2C_CLIENT_INSMOD_. * [Client data] Get rid of sysctl_id. Try using standard names for register values (for example, temp_os becomes temp_max). You're @@ -66,13 +68,15 @@ Technical changes: if (!(adapter->class & I2C_CLASS_HWMON)) return 0; ISA-only drivers of course don't need this. + Call i2c_probe() instead of i2c_detect(). * [Detect] As mentioned earlier, the flags parameter is gone. The type_name and client_name strings are replaced by a single name string, which will be filled with a lowercase, short string (typically the driver name, e.g. "lm75"). In i2c-only drivers, drop the i2c_is_isa_adapter check, it's - useless. + useless. Same for isa-only drivers, as the test would always be + true. Only hybrid drivers (which are quite rare) still need it. The errorN labels are reduced to the number needed. If that number is 2 (i2c-only drivers), it is advised that the labels are named exit and exit_free. For i2c+isa drivers, labels should be named @@ -86,6 +90,8 @@ Technical changes: device_create_file. Move the driver initialization before any sysfs file creation. Drop client->id. + Drop any 24RF08 corruption prevention you find, as this is now done + at the i2c-core level, and doing it twice voids it. * [Init] Limits must not be set by the driver (can be done later in user-space). Chip should not be reset default (although a module @@ -93,7 +99,8 @@ Technical changes: limited to the strictly necessary steps. * [Detach] Get rid of data, remove the call to - i2c_deregister_entry. + i2c_deregister_entry. Do not log an error message if + i2c_detach_client fails, as i2c-core will now do it for you. * [Update] Don't access client->data directly, use i2c_get_clientdata(client) instead. diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 91664be91ffc..077275722a7c 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -148,15 +148,15 @@ are defined in i2c.h to help you support them, as well as a generic detection algorithm. You do not have to use this parameter interface; but don't try to use -function i2c_probe() (or i2c_detect()) if you don't. +function i2c_probe() if you don't. NOTE: If you want to write a `sensors' driver, the interface is slightly different! See below. -Probing classes (i2c) ---------------------- +Probing classes +--------------- All parameters are given as lists of unsigned 16-bit integers. Lists are terminated by I2C_CLIENT_END. @@ -171,12 +171,18 @@ The following lists are used internally: ignore: insmod parameter. A list of pairs. The first value is a bus number (-1 for any I2C bus), the second is the I2C address. These addresses are never probed. - This parameter overrules 'normal' and 'probe', but not the 'force' lists. + This parameter overrules the 'normal_i2c' list only. force: insmod parameter. A list of pairs. The first value is a bus number (-1 for any I2C bus), the second is the I2C address. A device is blindly assumed to be on the given address, no probing is done. +Additionally, kind-specific force lists may optionally be defined if +the driver supports several chip kinds. They are grouped in a +NULL-terminated list of pointers named forces, those first element if the +generic force list mentioned above. Each additional list correspond to an +insmod parameter of the form force_. + Fortunately, as a module writer, you just have to define the `normal_i2c' parameter. The complete declaration could look like this: @@ -186,66 +192,17 @@ parameter. The complete declaration could look like this: /* Magic definition of all other variables and things */ I2C_CLIENT_INSMOD; + /* Or, if your driver supports, say, 2 kind of devices: */ + I2C_CLIENT_INSMOD_2(foo, bar); + +If you use the multi-kind form, an enum will be defined for you: + enum chips { any_chip, foo, bar, ... } +You can then (and certainly should) use it in the driver code. Note that you *have* to call the defined variable `normal_i2c', without any prefix! -Probing classes (sensors) -------------------------- - -If you write a `sensors' driver, you use a slightly different interface. -As well as I2C addresses, we have to cope with ISA addresses. Also, we -use a enum of chip types. Don't forget to include `sensors.h'. - -The following lists are used internally. They are all lists of integers. - - normal_i2c: filled in by the module writer. Terminated by SENSORS_I2C_END. - A list of I2C addresses which should normally be examined. - normal_isa: filled in by the module writer. Terminated by SENSORS_ISA_END. - A list of ISA addresses which should normally be examined. - probe: insmod parameter. Initialize this list with SENSORS_I2C_END values. - A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for - the ISA bus, -1 for any I2C bus), the second is the address. These - addresses are also probed, as if they were in the 'normal' list. - ignore: insmod parameter. Initialize this list with SENSORS_I2C_END values. - A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for - the ISA bus, -1 for any I2C bus), the second is the I2C address. These - addresses are never probed. This parameter overrules 'normal' and - 'probe', but not the 'force' lists. - -Also used is a list of pointers to sensors_force_data structures: - force_data: insmod parameters. A list, ending with an element of which - the force field is NULL. - Each element contains the type of chip and a list of pairs. - The first value is a bus number (SENSORS_ISA_BUS for the ISA bus, - -1 for any I2C bus), the second is the address. - These are automatically translated to insmod variables of the form - force_foo. - -So we have a generic insmod variabled `force', and chip-specific variables -`force_CHIPNAME'. - -Fortunately, as a module writer, you just have to define the `normal_i2c' -and `normal_isa' parameters, and define what chip names are used. -The complete declaration could look like this: - /* Scan i2c addresses 0x37, and 0x48 to 0x4f */ - static unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4b, 0x4c, - 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; - /* Scan ISA address 0x290 */ - static unsigned int normal_isa[] = {0x0290,SENSORS_ISA_END}; - - /* Define chips foo and bar, as well as all module parameters and things */ - SENSORS_INSMOD_2(foo,bar); - -If you have one chip, you use macro SENSORS_INSMOD_1(chip), if you have 2 -you use macro SENSORS_INSMOD_2(chip1,chip2), etc. If you do not want to -bother with chip types, you can use SENSORS_INSMOD_0. - -A enum is automatically defined as follows: - enum chips { any_chip, chip1, chip2, ... } - - Attaching to an adapter ----------------------- @@ -264,17 +221,10 @@ detected at a specific address, another callback is called. return i2c_probe(adapter,&addr_data,&foo_detect_client); } -For `sensors' drivers, use the i2c_detect function instead: - - int foo_attach_adapter(struct i2c_adapter *adapter) - { - return i2c_detect(adapter,&addr_data,&foo_detect_client); - } - Remember, structure `addr_data' is defined by the macros explained above, so you do not have to define it yourself. -The i2c_probe or i2c_detect function will call the foo_detect_client +The i2c_probe function will call the foo_detect_client function only for those i2c addresses that actually have a device on them (unless a `force' parameter was used). In addition, addresses that are already in use (by some other registered client) are skipped. @@ -283,19 +233,18 @@ are already in use (by some other registered client) are skipped. The detect client function -------------------------- -The detect client function is called by i2c_probe or i2c_detect. -The `kind' parameter contains 0 if this call is due to a `force' -parameter, and -1 otherwise (for i2c_detect, it contains 0 if -this call is due to the generic `force' parameter, and the chip type -number if it is due to a specific `force' parameter). +The detect client function is called by i2c_probe. The `kind' parameter +contains -1 for a probed detection, 0 for a forced detection, or a positive +number for a forced detection with a chip type forced. Below, some things are only needed if this is a `sensors' driver. Those parts are between /* SENSORS ONLY START */ and /* SENSORS ONLY END */ markers. -This function should only return an error (any value != 0) if there is -some reason why no more detection should be done anymore. If the -detection just fails for this address, return 0. +Returning an error different from -ENODEV in a detect function will cause +the detection to stop: other addresses and adapters won't be scanned. +This should only be done on fatal or internal errors, such as a memory +shortage or i2c_attach_client failing. For now, you can ignore the `flags' parameter. It is there for future use. @@ -320,11 +269,10 @@ For now, you can ignore the `flags' parameter. It is there for future use. const char *type_name = ""; int is_isa = i2c_is_isa_adapter(adapter); - if (is_isa) { + /* Do this only if the chip can additionally be found on the ISA bus + (hybrid chip). */ - /* If this client can't be on the ISA bus at all, we can stop now - (call `goto ERROR0'). But for kicks, we will assume it is all - right. */ + if (is_isa) { /* Discard immediately if this ISA range is already used */ if (check_region(address,FOO_EXTENT)) @@ -495,15 +443,13 @@ much simpler than the attachment code, fortunately! /* SENSORS ONLY END */ /* Try to detach the client from i2c space */ - if ((err = i2c_detach_client(client))) { - printk("foo.o: Client deregistration failed, client not detached.\n"); + if ((err = i2c_detach_client(client))) return err; - } - /* SENSORS ONLY START */ + /* HYBRID SENSORS CHIP ONLY START */ if i2c_is_isa_client(client) release_region(client->addr,LM78_EXTENT); - /* SENSORS ONLY END */ + /* HYBRID SENSORS CHIP ONLY END */ kfree(client); /* Frees client data too, if allocated at the same time */ return 0; diff --git a/MAINTAINERS b/MAINTAINERS index 5899ec1504f3..7e1f67130a16 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -933,6 +933,13 @@ M: khc@pm.waw.pl W: http://www.kernel.org/pub/linux/utils/net/hdlc/ S: Maintained +HARDWARE MONITORING +P: Jean Delvare +M: khali@linux-fr.org +L: lm-sensors@lm-sensors.org +W: http://www.lm-sensors.nu/ +S: Maintained + HARMONY SOUND DRIVER P: Kyle McMartin M: kyle@parisc-linux.org @@ -1014,7 +1021,7 @@ P: William Irwin M: wli@holomorphy.com S: Maintained -I2C AND SENSORS DRIVERS +I2C SUBSYSTEM P: Greg Kroah-Hartman M: greg@kroah.com P: Jean Delvare diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 140d5f851a5b..138dc50270e3 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -12,12 +12,20 @@ config HWMON of a system. Most modern motherboards include such a device. It can include temperature sensors, voltage sensors, fan speed sensors and various additional features such as the ability to - control the speed of the fans. + control the speed of the fans. If you want this support you + should say Y here and also to the specific driver(s) for your + sensors chip(s) below. + + This support can also be built as a module. If so, the module + will be called hwmon. + +config HWMON_VID + tristate + default n config SENSORS_ADM1021 tristate "Analog Devices ADM1021 and compatibles" depends on HWMON && I2C - select I2C_SENSOR help If you say yes here you get support for Analog Devices ADM1021 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, @@ -30,7 +38,7 @@ config SENSORS_ADM1021 config SENSORS_ADM1025 tristate "Analog Devices ADM1025 and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for Analog Devices ADM1025 and Philips NE1619 sensor chips. @@ -41,7 +49,7 @@ config SENSORS_ADM1025 config SENSORS_ADM1026 tristate "Analog Devices ADM1026 and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for Analog Devices ADM1026 sensor chip. @@ -52,7 +60,6 @@ config SENSORS_ADM1026 config SENSORS_ADM1031 tristate "Analog Devices ADM1031 and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for Analog Devices ADM1031 and ADM1030 sensor chips. @@ -63,7 +70,7 @@ config SENSORS_ADM1031 config SENSORS_ADM9240 tristate "Analog Devices ADM9240 and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for Analog Devices ADM9240, Dallas DS1780, National Semiconductor LM81 sensor chips. @@ -74,7 +81,7 @@ config SENSORS_ADM9240 config SENSORS_ASB100 tristate "Asus ASB100 Bach" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for the ASB100 Bach sensor chip found on some Asus mainboards. @@ -85,7 +92,7 @@ config SENSORS_ASB100 config SENSORS_ATXP1 tristate "Attansic ATXP1 VID controller" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for the Attansic ATXP1 VID controller. @@ -99,7 +106,6 @@ config SENSORS_ATXP1 config SENSORS_DS1621 tristate "Dallas Semiconductor DS1621 and DS1625" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for Dallas Semiconductor DS1621 and DS1625 sensor chips. @@ -110,7 +116,6 @@ config SENSORS_DS1621 config SENSORS_FSCHER tristate "FSC Hermes" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for Fujitsu Siemens Computers Hermes sensor chips. @@ -121,7 +126,6 @@ config SENSORS_FSCHER config SENSORS_FSCPOS tristate "FSC Poseidon" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for Fujitsu Siemens Computers Poseidon sensor chips. @@ -132,7 +136,6 @@ config SENSORS_FSCPOS config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on HWMON && I2C - select I2C_SENSOR help If you say yes here you get support for Genesys Logic GL518SM sensor chips. @@ -143,7 +146,7 @@ config SENSORS_GL518SM config SENSORS_GL520SM tristate "Genesys Logic GL520SM" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for Genesys Logic GL520SM sensor chips. @@ -154,7 +157,8 @@ config SENSORS_GL520SM config SENSORS_IT87 tristate "ITE IT87xx and compatibles" depends on HWMON && I2C - select I2C_SENSOR + select I2C_ISA + select HWMON_VID help If you say yes here you get support for ITE IT87xx sensor chips and clones: SiS960. @@ -165,7 +169,6 @@ config SENSORS_IT87 config SENSORS_LM63 tristate "National Semiconductor LM63" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for the National Semiconductor LM63 remote diode digital temperature sensor with integrated fan @@ -178,7 +181,6 @@ config SENSORS_LM63 config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on HWMON && I2C - select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM75 sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in @@ -194,7 +196,6 @@ config SENSORS_LM75 config SENSORS_LM77 tristate "National Semiconductor LM77" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM77 sensor chips. @@ -205,7 +206,8 @@ config SENSORS_LM77 config SENSORS_LM78 tristate "National Semiconductor LM78 and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select I2C_ISA + select HWMON_VID help If you say yes here you get support for National Semiconductor LM78, LM78-J and LM79. @@ -216,7 +218,6 @@ config SENSORS_LM78 config SENSORS_LM80 tristate "National Semiconductor LM80" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM80 sensor chips. @@ -227,7 +228,6 @@ config SENSORS_LM80 config SENSORS_LM83 tristate "National Semiconductor LM83" depends on HWMON && I2C - select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM83 sensor chips. @@ -238,7 +238,7 @@ config SENSORS_LM83 config SENSORS_LM85 tristate "National Semiconductor LM85 and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for National Semiconductor LM85 sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027. @@ -249,7 +249,7 @@ config SENSORS_LM85 config SENSORS_LM87 tristate "National Semiconductor LM87" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR + select HWMON_VID help If you say yes here you get support for National Semiconductor LM87 sensor chips. @@ -260,7 +260,6 @@ config SENSORS_LM87 config SENSORS_LM90 tristate "National Semiconductor LM90 and compatibles" depends on HWMON && I2C - select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM90, LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and @@ -275,7 +274,6 @@ config SENSORS_LM90 config SENSORS_LM92 tristate "National Semiconductor LM92 and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM92 and Maxim MAX6635 sensor chips. @@ -286,7 +284,6 @@ config SENSORS_LM92 config SENSORS_MAX1619 tristate "Maxim MAX1619 sensor chip" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for MAX1619 sensor chip. @@ -296,8 +293,8 @@ config SENSORS_MAX1619 config SENSORS_PC87360 tristate "National Semiconductor PC87360 family" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR select I2C_ISA + select HWMON_VID help If you say yes here you get access to the hardware monitoring functions of the National Semiconductor PC8736x Super-I/O chips. @@ -311,7 +308,6 @@ config SENSORS_PC87360 config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" depends on HWMON && I2C && PCI && EXPERIMENTAL - select I2C_SENSOR select I2C_ISA help If you say yes here you get support for the integrated sensors in @@ -323,7 +319,6 @@ config SENSORS_SIS5595 config SENSORS_SMSC47M1 tristate "SMSC LPC47M10x and compatibles" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR select I2C_ISA help If you say yes here you get support for the integrated fan @@ -336,7 +331,6 @@ config SENSORS_SMSC47M1 config SENSORS_SMSC47B397 tristate "SMSC LPC47B397-NC" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR select I2C_ISA help If you say yes here you get support for the SMSC LPC47B397-NC @@ -348,7 +342,6 @@ config SENSORS_SMSC47B397 config SENSORS_VIA686A tristate "VIA686A" depends on HWMON && I2C && PCI - select I2C_SENSOR select I2C_ISA help If you say yes here you get support for the integrated sensors in @@ -360,7 +353,8 @@ config SENSORS_VIA686A config SENSORS_W83781D tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" depends on HWMON && I2C - select I2C_SENSOR + select I2C_ISA + select HWMON_VID help If you say yes here you get support for the Winbond W8378x series of sensor chips: the W83781D, W83782D, W83783S and W83627HF, @@ -369,10 +363,18 @@ config SENSORS_W83781D This driver can also be built as a module. If so, the module will be called w83781d. +config SENSORS_W83792D + tristate "Winbond W83792D" + depends on HWMON && I2C && EXPERIMENTAL + help + If you say yes here you get support for the Winbond W83792D chip. + + This driver can also be built as a module. If so, the module + will be called w83792d. + config SENSORS_W83L785TS tristate "Winbond W83L785TS-S" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for the Winbond W83L785TS-S sensor chip, which is used on the Asus A7N8X, among other @@ -384,8 +386,8 @@ config SENSORS_W83L785TS config SENSORS_W83627HF tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR select I2C_ISA + select HWMON_VID help If you say yes here you get support for the Winbond W836X7 series of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF @@ -396,7 +398,6 @@ config SENSORS_W83627HF config SENSORS_W83627EHF tristate "Winbond W83627EHF" depends on HWMON && I2C && EXPERIMENTAL - select I2C_SENSOR select I2C_ISA help If you say yes here you get preliminary support for the hardware @@ -404,6 +405,9 @@ config SENSORS_W83627EHF Only fan and temperature inputs are supported at the moment, while the chip does much more than that. + This driver also supports the W83627EHG, which is the lead-free + version of the W83627EHF. + This driver can also be built as a module. If so, the module will be called w83627ehf. diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 2781403a0236..381f1bf04cc5 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -2,9 +2,13 @@ # Makefile for sensor chip drivers. # +obj-$(CONFIG_HWMON) += hwmon.o +obj-$(CONFIG_HWMON_VID) += hwmon-vid.o + # asb100, then w83781d go first, as they can override other drivers' addresses. obj-$(CONFIG_SENSORS_ASB100) += asb100.o obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o +obj-$(CONFIG_SENSORS_W83792D) += w83792d.o obj-$(CONFIG_SENSORS_W83781D) += w83781d.o obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index d2c774c32f45..e928cdb041cb 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -24,7 +24,8 @@ #include #include #include -#include +#include +#include /* Addresses to scan */ @@ -32,10 +33,9 @@ static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* Insmod parameters */ -SENSORS_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066); +I2C_CLIENT_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066); /* adm1021 constants specified below */ @@ -89,6 +89,7 @@ clearing it. Weird, ey? --Phil */ /* Each client has this additional data */ struct adm1021_data { struct i2c_client client; + struct class_device *class_dev; enum chips type; struct semaphore update_lock; @@ -185,7 +186,7 @@ static int adm1021_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, adm1021_detect); + return i2c_probe(adapter, &addr_data, adm1021_detect); } static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) @@ -196,15 +197,6 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) int err = 0; const char *type_name = ""; - /* Make sure we aren't probing the ISA bus!! This is just a safety check - at this moment; i2c_detect really won't call us. */ -#ifdef DEBUG - if (i2c_is_isa_adapter(adapter)) { - dev_dbg(&adapter->dev, "adm1021_detect called for an ISA bus adapter?!?\n"); - return 0; - } -#endif - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto error0; @@ -295,6 +287,12 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) adm1021_init_client(new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto error2; + } + device_create_file(&new_client->dev, &dev_attr_temp1_max); device_create_file(&new_client->dev, &dev_attr_temp1_min); device_create_file(&new_client->dev, &dev_attr_temp1_input); @@ -305,6 +303,8 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +error2: + i2c_detach_client(new_client); error1: kfree(data); error0: @@ -322,14 +322,15 @@ static void adm1021_init_client(struct i2c_client *client) static int adm1021_detach_client(struct i2c_client *client) { + struct adm1021_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, client not detached.\n"); - return err; - } + hwmon_device_unregister(data->class_dev); - kfree(i2c_get_clientdata(client)); + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); return 0; } diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c index e452d0daf906..526b7ff179eb 100644 --- a/drivers/hwmon/adm1025.c +++ b/drivers/hwmon/adm1025.c @@ -50,8 +50,9 @@ #include #include #include -#include -#include +#include +#include +#include /* * Addresses to scan @@ -60,13 +61,12 @@ */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* * Insmod parameters */ -SENSORS_INSMOD_2(adm1025, ne1619); +I2C_CLIENT_INSMOD_2(adm1025, ne1619); /* * The ADM1025 registers @@ -132,6 +132,7 @@ static struct i2c_driver adm1025_driver = { struct adm1025_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -312,7 +313,7 @@ static int adm1025_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, adm1025_detect); + return i2c_probe(adapter, &addr_data, adm1025_detect); } /* @@ -416,6 +417,12 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) adm1025_init_client(new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &dev_attr_in0_input); device_create_file(&new_client->dev, &dev_attr_in1_input); device_create_file(&new_client->dev, &dev_attr_in2_input); @@ -452,6 +459,8 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -464,7 +473,7 @@ static void adm1025_init_client(struct i2c_client *client) struct adm1025_data *data = i2c_get_clientdata(client); int i; - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); /* * Set high limits @@ -502,15 +511,15 @@ static void adm1025_init_client(struct i2c_client *client) static int adm1025_detach_client(struct i2c_client *client) { + struct adm1025_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } + hwmon_device_unregister(data->class_dev); - kfree(i2c_get_clientdata(client)); + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); return 0; } diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index c8a7f47911f9..625158110fd4 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -28,16 +28,16 @@ #include #include #include -#include -#include +#include #include +#include +#include /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* Insmod parameters */ -SENSORS_INSMOD_1(adm1026); +I2C_CLIENT_INSMOD_1(adm1026); static int gpio_input[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }; @@ -259,6 +259,7 @@ struct pwm_data { struct adm1026_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore lock; enum chips type; @@ -319,13 +320,15 @@ int adm1026_attach_adapter(struct i2c_adapter *adapter) if (!(adapter->class & I2C_CLASS_HWMON)) { return 0; } - return i2c_detect(adapter, &addr_data, adm1026_detect); + return i2c_probe(adapter, &addr_data, adm1026_detect); } int adm1026_detach_client(struct i2c_client *client) { + struct adm1026_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->class_dev); i2c_detach_client(client); - kfree(i2c_get_clientdata(client)); + kfree(data); return 0; } @@ -1549,12 +1552,18 @@ int adm1026_detect(struct i2c_adapter *adapter, int address, goto exitfree; /* Set the VRM version */ - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); /* Initialize the ADM1026 chip */ adm1026_init_client(new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exitdetach; + } + device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr); device_create_file(&new_client->dev, &sensor_dev_attr_in0_max.dev_attr); device_create_file(&new_client->dev, &sensor_dev_attr_in0_min.dev_attr); @@ -1690,6 +1699,8 @@ int adm1026_detect(struct i2c_adapter *adapter, int address, return 0; /* Error out and cleanup code */ +exitdetach: + i2c_detach_client(new_client); exitfree: kfree(data); exit: diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index 936250957270..58338ed7c8a1 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -26,7 +26,8 @@ #include #include #include -#include +#include +#include /* Following macros takes channel parameter starting from 0 to 2 */ #define ADM1031_REG_FAN_SPEED(nr) (0x08 + (nr)) @@ -59,16 +60,16 @@ /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* Insmod parameters */ -SENSORS_INSMOD_2(adm1030, adm1031); +I2C_CLIENT_INSMOD_2(adm1030, adm1031); typedef u8 auto_chan_table_t[8][2]; /* Each client has this additional data */ struct adm1031_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; int chip_type; char valid; /* !=0 if following fields are valid */ @@ -725,10 +726,10 @@ static int adm1031_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, adm1031_detect); + return i2c_probe(adapter, &addr_data, adm1031_detect); } -/* This function is called by i2c_detect */ +/* This function is called by i2c_probe */ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; @@ -788,6 +789,12 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) adm1031_init_client(new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &dev_attr_fan1_input); device_create_file(&new_client->dev, &dev_attr_fan1_div); device_create_file(&new_client->dev, &dev_attr_fan1_min); @@ -833,6 +840,8 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -841,11 +850,14 @@ exit: static int adm1031_detach_client(struct i2c_client *client) { + struct adm1031_data *data = i2c_get_clientdata(client); int ret; + + hwmon_device_unregister(data->class_dev); if ((ret = i2c_detach_client(client)) != 0) { return ret; } - kfree(i2c_get_clientdata(client)); + kfree(data); return 0; } diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index ce2a6eb93f6e..bc7faef162f7 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -45,17 +45,16 @@ #include #include #include -#include -#include +#include +#include +#include /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - /* Insmod parameters */ -SENSORS_INSMOD_3(adm9240, ds1780, lm81); +I2C_CLIENT_INSMOD_3(adm9240, ds1780, lm81); /* ADM9240 registers */ #define ADM9240_REG_MAN_ID 0x3e @@ -150,6 +149,7 @@ static struct i2c_driver adm9240_driver = { struct adm9240_data { enum chips type; struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; unsigned long last_updated_measure; @@ -582,6 +582,12 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) adm9240_init_client(new_client); /* populate sysfs filesystem */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &dev_attr_in0_input); device_create_file(&new_client->dev, &dev_attr_in0_min); device_create_file(&new_client->dev, &dev_attr_in0_max); @@ -615,6 +621,9 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) device_create_file(&new_client->dev, &dev_attr_cpu0_vid); return 0; + +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -625,20 +634,20 @@ static int adm9240_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, adm9240_detect); + return i2c_probe(adapter, &addr_data, adm9240_detect); } static int adm9240_detach_client(struct i2c_client *client) { + struct adm9240_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } + hwmon_device_unregister(data->class_dev); - kfree(i2c_get_clientdata(client)); + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); return 0; } @@ -648,7 +657,7 @@ static void adm9240_init_client(struct i2c_client *client) u8 conf = adm9240_read_value(client, ADM9240_REG_CONFIG); u8 mode = adm9240_read_value(client, ADM9240_REG_TEMP_CONF) & 3; - data->vrm = i2c_which_vrm(); /* need this to report vid as mV */ + data->vrm = vid_which_vrm(); /* need this to report vid as mV */ dev_info(&client->dev, "Using VRM: %d.%d\n", data->vrm / 10, data->vrm % 10); diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c index 70d996d6fe0a..8e34855a6274 100644 --- a/drivers/hwmon/asb100.c +++ b/drivers/hwmon/asb100.c @@ -39,8 +39,9 @@ #include #include #include -#include -#include +#include +#include +#include #include #include #include "lm75.h" @@ -54,11 +55,8 @@ /* I2C addresses to scan */ static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END }; -/* ISA addresses to scan (none) */ -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - /* Insmod parameters */ -SENSORS_INSMOD_1(asb100); +I2C_CLIENT_INSMOD_1(asb100); I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); @@ -183,6 +181,7 @@ static u8 DIV_TO_REG(long val) dynamically allocated, at the same time the client itself is allocated. */ struct asb100_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore lock; enum chips type; @@ -621,7 +620,7 @@ static int asb100_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, asb100_detect); + return i2c_probe(adapter, &addr_data, asb100_detect); } static int asb100_detect_subclients(struct i2c_adapter *adapter, int address, @@ -714,14 +713,6 @@ static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) struct i2c_client *new_client; struct asb100_data *data; - /* asb100 is SMBus only */ - if (i2c_is_isa_adapter(adapter)) { - pr_debug("asb100.o: detect failed, " - "cannot attach to legacy adapter!\n"); - err = -ENODEV; - goto ERROR0; - } - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { pr_debug("asb100.o: detect failed, " "smbus byte data not supported!\n"); @@ -821,6 +812,12 @@ static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) data->fan_min[2] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(2)); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto ERROR3; + } + device_create_file_in(new_client, 0); device_create_file_in(new_client, 1); device_create_file_in(new_client, 2); @@ -847,6 +844,11 @@ static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +ERROR3: + i2c_detach_client(data->lm75[1]); + i2c_detach_client(data->lm75[0]); + kfree(data->lm75[1]); + kfree(data->lm75[0]); ERROR2: i2c_detach_client(new_client); ERROR1: @@ -857,21 +859,23 @@ ERROR0: static int asb100_detach_client(struct i2c_client *client) { + struct asb100_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "client deregistration failed; " - "client not detached.\n"); - return err; - } + /* main client */ + if (data) + hwmon_device_unregister(data->class_dev); - if (i2c_get_clientdata(client)==NULL) { - /* subclients */ + if ((err = i2c_detach_client(client))) + return err; + + /* main client */ + if (data) + kfree(data); + + /* subclient */ + else kfree(client); - } else { - /* main client */ - kfree(i2c_get_clientdata(client)); - } return 0; } @@ -969,7 +973,7 @@ static void asb100_init_client(struct i2c_client *client) vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f; vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4; - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); vid = vid_from_reg(vid, data->vrm); /* Start monitoring */ diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c index fca3fc1cef72..deb4d34c9539 100644 --- a/drivers/hwmon/atxp1.c +++ b/drivers/hwmon/atxp1.c @@ -23,8 +23,9 @@ #include #include #include -#include -#include +#include +#include +#include MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("System voltages control via Attansic ATXP1"); @@ -40,9 +41,8 @@ MODULE_AUTHOR("Sebastian Witt "); #define ATXP1_GPIO1MASK 0x0f static unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; -SENSORS_INSMOD_1(atxp1); +I2C_CLIENT_INSMOD_1(atxp1); static int atxp1_attach_adapter(struct i2c_adapter * adapter); static int atxp1_detach_client(struct i2c_client * client); @@ -59,6 +59,7 @@ static struct i2c_driver atxp1_driver = { struct atxp1_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; unsigned long last_updated; u8 valid; @@ -252,7 +253,7 @@ static DEVICE_ATTR(gpio2, S_IRUGO | S_IWUSR, atxp1_showgpio2, atxp1_storegpio2); static int atxp1_attach_adapter(struct i2c_adapter *adapter) { - return i2c_detect(adapter, &addr_data, &atxp1_detect); + return i2c_probe(adapter, &addr_data, &atxp1_detect); }; static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) @@ -295,7 +296,7 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) } /* Get VRM */ - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); if ((data->vrm != 90) && (data->vrm != 91)) { dev_err(&new_client->dev, "Not supporting VRM %d.%d\n", @@ -317,6 +318,12 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) goto exit_free; } + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &dev_attr_gpio1); device_create_file(&new_client->dev, &dev_attr_gpio2); device_create_file(&new_client->dev, &dev_attr_cpu0_vid); @@ -326,6 +333,8 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -334,14 +343,17 @@ exit: static int atxp1_detach_client(struct i2c_client * client) { + struct atxp1_data * data = i2c_get_clientdata(client); int err; + hwmon_device_unregister(data->class_dev); + err = i2c_detach_client(client); if (err) dev_err(&client->dev, "Failed to detach client.\n"); else - kfree(i2c_get_clientdata(client)); + kfree(data); return err; }; diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index 5360d58804f6..b0199e063d0e 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -26,16 +26,16 @@ #include #include #include -#include +#include +#include #include "lm75.h" /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* Insmod parameters */ -SENSORS_INSMOD_1(ds1621); +I2C_CLIENT_INSMOD_1(ds1621); static int polarity = -1; module_param(polarity, int, 0); MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low"); @@ -71,6 +71,7 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low") /* Each client has this additional data */ struct ds1621_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -179,10 +180,10 @@ static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); static int ds1621_attach_adapter(struct i2c_adapter *adapter) { - return i2c_detect(adapter, &addr_data, ds1621_detect); + return i2c_probe(adapter, &addr_data, ds1621_detect); } -/* This function is called by i2c_detect */ +/* This function is called by i2c_probe */ int ds1621_detect(struct i2c_adapter *adapter, int address, int kind) { @@ -250,6 +251,12 @@ int ds1621_detect(struct i2c_adapter *adapter, int address, ds1621_init_client(new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &dev_attr_alarms); device_create_file(&new_client->dev, &dev_attr_temp1_input); device_create_file(&new_client->dev, &dev_attr_temp1_min); @@ -259,6 +266,8 @@ int ds1621_detect(struct i2c_adapter *adapter, int address, /* OK, this is not exactly good programming practice, usually. But it is very code-efficient in this case. */ + exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -267,15 +276,15 @@ int ds1621_detect(struct i2c_adapter *adapter, int address, static int ds1621_detach_client(struct i2c_client *client) { + struct ds1621_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } + hwmon_device_unregister(data->class_dev); - kfree(i2c_get_clientdata(client)); + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); return 0; } diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c index da411741c2c5..eef6061d786b 100644 --- a/drivers/hwmon/fscher.c +++ b/drivers/hwmon/fscher.c @@ -31,20 +31,20 @@ #include #include #include -#include +#include +#include /* * Addresses to scan */ static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* * Insmod parameters */ -SENSORS_INSMOD_1(fscher); +I2C_CLIENT_INSMOD_1(fscher); /* * The FSCHER registers @@ -132,6 +132,7 @@ static struct i2c_driver fscher_driver = { struct fscher_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -287,7 +288,7 @@ static int fscher_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, fscher_detect); + return i2c_probe(adapter, &addr_data, fscher_detect); } static int fscher_detect(struct i2c_adapter *adapter, int address, int kind) @@ -341,6 +342,12 @@ static int fscher_detect(struct i2c_adapter *adapter, int address, int kind) fscher_init_client(new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file_revision(new_client); device_create_file_alarms(new_client); device_create_file_control(new_client); @@ -360,6 +367,8 @@ static int fscher_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -368,15 +377,15 @@ exit: static int fscher_detach_client(struct i2c_client *client) { + struct fscher_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } + hwmon_device_unregister(data->class_dev); - kfree(i2c_get_clientdata(client)); + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); return 0; } diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c index 301ae98bd0ad..5fc77a5fed07 100644 --- a/drivers/hwmon/fscpos.c +++ b/drivers/hwmon/fscpos.c @@ -34,19 +34,19 @@ #include #include #include -#include #include +#include +#include /* * Addresses to scan */ static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* * Insmod parameters */ -SENSORS_INSMOD_1(fscpos); +I2C_CLIENT_INSMOD_1(fscpos); /* * The FSCPOS registers @@ -113,6 +113,7 @@ static struct i2c_driver fscpos_driver = { */ struct fscpos_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; /* 0 until following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -434,7 +435,7 @@ static int fscpos_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, fscpos_detect); + return i2c_probe(adapter, &addr_data, fscpos_detect); } int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) @@ -496,6 +497,12 @@ int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &dev_attr_event); device_create_file(&new_client->dev, &dev_attr_in0_input); device_create_file(&new_client->dev, &dev_attr_in1_input); @@ -526,6 +533,8 @@ int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -534,14 +543,14 @@ exit: static int fscpos_detach_client(struct i2c_client *client) { + struct fscpos_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, client" - " not detached.\n"); + hwmon_device_unregister(data->class_dev); + + if ((err = i2c_detach_client(client))) return err; - } - kfree(i2c_get_clientdata(client)); + kfree(data); return 0; } diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c index 6bedf729dcf5..256b9323c84b 100644 --- a/drivers/hwmon/gl518sm.c +++ b/drivers/hwmon/gl518sm.c @@ -41,14 +41,14 @@ #include #include #include -#include +#include +#include /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* Insmod parameters */ -SENSORS_INSMOD_2(gl518sm_r00, gl518sm_r80); +I2C_CLIENT_INSMOD_2(gl518sm_r00, gl518sm_r80); /* Many GL518 constants specified below */ @@ -117,6 +117,7 @@ static inline u8 FAN_TO_REG(long rpm, int div) /* Each client has this additional data */ struct gl518_data { struct i2c_client client; + struct class_device *class_dev; enum chips type; struct semaphore update_lock; @@ -346,7 +347,7 @@ static int gl518_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, gl518_detect); + return i2c_probe(adapter, &addr_data, gl518_detect); } static int gl518_detect(struct i2c_adapter *adapter, int address, int kind) @@ -419,6 +420,12 @@ static int gl518_detect(struct i2c_adapter *adapter, int address, int kind) gl518_init_client((struct i2c_client *) new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &dev_attr_in0_input); device_create_file(&new_client->dev, &dev_attr_in1_input); device_create_file(&new_client->dev, &dev_attr_in2_input); @@ -450,6 +457,8 @@ static int gl518_detect(struct i2c_adapter *adapter, int address, int kind) /* OK, this is not exactly good programming practice, usually. But it is very code-efficient in this case. */ +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -477,16 +486,15 @@ static void gl518_init_client(struct i2c_client *client) static int gl518_detach_client(struct i2c_client *client) { + struct gl518_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); + hwmon_device_unregister(data->class_dev); + + if ((err = i2c_detach_client(client))) return err; - } - - kfree(i2c_get_clientdata(client)); + kfree(data); return 0; } diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c index 80ae8d30c2af..12fd757066fc 100644 --- a/drivers/hwmon/gl520sm.c +++ b/drivers/hwmon/gl520sm.c @@ -26,8 +26,9 @@ #include #include #include -#include -#include +#include +#include +#include /* Type of the extra sensor */ static unsigned short extra_sensor_type; @@ -36,10 +37,9 @@ MODULE_PARM_DESC(extra_sensor_type, "Type of extra sensor (0=autodetect, 1=tempe /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* Insmod parameters */ -SENSORS_INSMOD_1(gl520sm); +I2C_CLIENT_INSMOD_1(gl520sm); /* Many GL520 constants specified below One of the inputs can be configured as either temp or voltage. @@ -120,6 +120,7 @@ static struct i2c_driver gl520_driver = { /* Client data */ struct gl520_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; /* zero until the following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -518,7 +519,7 @@ static int gl520_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, gl520_detect); + return i2c_probe(adapter, &addr_data, gl520_detect); } static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) @@ -571,6 +572,12 @@ static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) gl520_init_client(new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file_vid(new_client, 0); device_create_file_in(new_client, 0); @@ -592,6 +599,8 @@ static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -608,7 +617,7 @@ static void gl520_init_client(struct i2c_client *client) conf = oldconf = gl520_read_value(client, GL520_REG_CONF); data->alarm_mask = 0xff; - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); if (extra_sensor_type == 1) conf &= ~0x10; @@ -639,15 +648,15 @@ static void gl520_init_client(struct i2c_client *client) static int gl520_detach_client(struct i2c_client *client) { + struct gl520_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } + hwmon_device_unregister(data->class_dev); - kfree(i2c_get_clientdata(client)); + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); return 0; } diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c new file mode 100644 index 000000000000..312769ad4dab --- /dev/null +++ b/drivers/hwmon/hwmon-vid.c @@ -0,0 +1,189 @@ +/* + hwmon-vid.c - VID/VRM/VRD voltage conversions + + Copyright (c) 2004 Rudolf Marek + + Partly imported from i2c-vid.h of the lm_sensors project + Copyright (c) 2002 Mark D. Studebaker + With assistance from Trent Piepho + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include + +/* + Common code for decoding VID pins. + + References: + + For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines", + available at http://developer.intel.com/. + + For VRD 10.0 and up, "VRD x.y Design Guide", + available at http://developer.intel.com/. + + AMD Opteron processors don't follow the Intel specifications. + I'm going to "make up" 2.4 as the spec number for the Opterons. + No good reason just a mnemonic for the 24x Opteron processor + series. + + Opteron VID encoding is: + 00000 = 1.550 V + 00001 = 1.525 V + . . . . + 11110 = 0.800 V + 11111 = 0.000 V (off) +*/ + +/* vrm is the VRM/VRD document version multiplied by 10. + val is the 4-, 5- or 6-bit VID code. + Returned value is in mV to avoid floating point in the kernel. */ +int vid_from_reg(int val, int vrm) +{ + int vid; + + switch(vrm) { + + case 0: + return 0; + + case 100: /* VRD 10.0 */ + if((val & 0x1f) == 0x1f) + return 0; + if((val & 0x1f) <= 0x09 || val == 0x0a) + vid = 10875 - (val & 0x1f) * 250; + else + vid = 18625 - (val & 0x1f) * 250; + if(val & 0x20) + vid -= 125; + vid /= 10; /* only return 3 dec. places for now */ + return vid; + + case 24: /* Opteron processor */ + return(val == 0x1f ? 0 : 1550 - val * 25); + + case 91: /* VRM 9.1 */ + case 90: /* VRM 9.0 */ + return(val == 0x1f ? 0 : + 1850 - val * 25); + + case 85: /* VRM 8.5 */ + return((val & 0x10 ? 25 : 0) + + ((val & 0x0f) > 0x04 ? 2050 : 1250) - + ((val & 0x0f) * 50)); + + case 84: /* VRM 8.4 */ + val &= 0x0f; + /* fall through */ + default: /* VRM 8.2 */ + return(val == 0x1f ? 0 : + val & 0x10 ? 5100 - (val) * 100 : + 2050 - (val) * 50); + } +} + + +/* + After this point is the code to automatically determine which + VRM/VRD specification should be used depending on the CPU. +*/ + +struct vrm_model { + u8 vendor; + u8 eff_family; + u8 eff_model; + int vrm_type; +}; + +#define ANY 0xFF + +#ifdef CONFIG_X86 + +static struct vrm_model vrm_models[] = { + {X86_VENDOR_AMD, 0x6, ANY, 90}, /* Athlon Duron etc */ + {X86_VENDOR_AMD, 0xF, ANY, 24}, /* Athlon 64, Opteron */ + {X86_VENDOR_INTEL, 0x6, 0x9, 85}, /* 0.13um too */ + {X86_VENDOR_INTEL, 0x6, 0xB, 85}, /* Tualatin */ + {X86_VENDOR_INTEL, 0x6, ANY, 82}, /* any P6 */ + {X86_VENDOR_INTEL, 0x7, ANY, 0}, /* Itanium */ + {X86_VENDOR_INTEL, 0xF, 0x0, 90}, /* P4 */ + {X86_VENDOR_INTEL, 0xF, 0x1, 90}, /* P4 Willamette */ + {X86_VENDOR_INTEL, 0xF, 0x2, 90}, /* P4 Northwood */ + {X86_VENDOR_INTEL, 0xF, 0x3, 100}, /* P4 Prescott */ + {X86_VENDOR_INTEL, 0xF, 0x4, 100}, /* P4 Prescott */ + {X86_VENDOR_INTEL, 0x10,ANY, 0}, /* Itanium 2 */ + {X86_VENDOR_UNKNOWN, ANY, ANY, 0} /* stop here */ +}; + +static int find_vrm(u8 eff_family, u8 eff_model, u8 vendor) +{ + int i = 0; + + while (vrm_models[i].vendor!=X86_VENDOR_UNKNOWN) { + if (vrm_models[i].vendor==vendor) + if ((vrm_models[i].eff_family==eff_family) + && ((vrm_models[i].eff_model==eff_model) || + (vrm_models[i].eff_model==ANY))) + return vrm_models[i].vrm_type; + i++; + } + + return 0; +} + +int vid_which_vrm(void) +{ + struct cpuinfo_x86 *c = cpu_data; + u32 eax; + u8 eff_family, eff_model; + int vrm_ret; + + if (c->x86 < 6) /* Any CPU with family lower than 6 */ + return 0; /* doesn't have VID and/or CPUID */ + + eax = cpuid_eax(1); + eff_family = ((eax & 0x00000F00)>>8); + eff_model = ((eax & 0x000000F0)>>4); + if (eff_family == 0xF) { /* use extended model & family */ + eff_family += ((eax & 0x00F00000)>>20); + eff_model += ((eax & 0x000F0000)>>16)<<4; + } + vrm_ret = find_vrm(eff_family,eff_model,c->x86_vendor); + if (vrm_ret == 0) + printk(KERN_INFO "hwmon-vid: Unknown VRM version of your " + "x86 CPU\n"); + return vrm_ret; +} + +/* and now something completely different for the non-x86 world */ +#else +int vid_which_vrm(void) +{ + printk(KERN_INFO "hwmon-vid: Unknown VRM version of your CPU\n"); + return 0; +} +#endif + +EXPORT_SYMBOL(vid_from_reg); +EXPORT_SYMBOL(vid_which_vrm); + +MODULE_AUTHOR("Rudolf Marek "); + +MODULE_DESCRIPTION("hwmon-vid driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c new file mode 100644 index 000000000000..9b41c9bd805f --- /dev/null +++ b/drivers/hwmon/hwmon.c @@ -0,0 +1,98 @@ +/* + hwmon.c - part of lm_sensors, Linux kernel modules for hardware monitoring + + This file defines the sysfs class "hwmon", for use by sensors drivers. + + Copyright (C) 2005 Mark M. Hoffman + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. +*/ + +#include +#include +#include +#include +#include +#include + +#define HWMON_ID_PREFIX "hwmon" +#define HWMON_ID_FORMAT HWMON_ID_PREFIX "%d" + +static struct class *hwmon_class; + +static DEFINE_IDR(hwmon_idr); + +/** + * hwmon_device_register - register w/ hwmon sysfs class + * @dev: the device to register + * + * hwmon_device_unregister() must be called when the class device is no + * longer needed. + * + * Returns the pointer to the new struct class device. + */ +struct class_device *hwmon_device_register(struct device *dev) +{ + struct class_device *cdev; + int id; + + if (idr_pre_get(&hwmon_idr, GFP_KERNEL) == 0) + return ERR_PTR(-ENOMEM); + + if (idr_get_new(&hwmon_idr, NULL, &id) < 0) + return ERR_PTR(-ENOMEM); + + id = id & MAX_ID_MASK; + cdev = class_device_create(hwmon_class, MKDEV(0,0), dev, + HWMON_ID_FORMAT, id); + + if (IS_ERR(cdev)) + idr_remove(&hwmon_idr, id); + + return cdev; +} + +/** + * hwmon_device_unregister - removes the previously registered class device + * + * @cdev: the class device to destroy + */ +void hwmon_device_unregister(struct class_device *cdev) +{ + int id; + + if (sscanf(cdev->class_id, HWMON_ID_FORMAT, &id) == 1) { + class_device_unregister(cdev); + idr_remove(&hwmon_idr, id); + } else + dev_dbg(cdev->dev, + "hwmon_device_unregister() failed: bad class ID!\n"); +} + +static int __init hwmon_init(void) +{ + hwmon_class = class_create(THIS_MODULE, "hwmon"); + if (IS_ERR(hwmon_class)) { + printk(KERN_ERR "hwmon.c: couldn't create sysfs class\n"); + return PTR_ERR(hwmon_class); + } + return 0; +} + +static void __exit hwmon_exit(void) +{ + class_destroy(hwmon_class); +} + +module_init(hwmon_init); +module_exit(hwmon_exit); + +EXPORT_SYMBOL_GPL(hwmon_device_register); +EXPORT_SYMBOL_GPL(hwmon_device_unregister); + +MODULE_AUTHOR("Mark M. Hoffman "); +MODULE_DESCRIPTION("hardware monitoring sysfs/class support"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index db20c9e47393..53cc2b6d6385 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -36,19 +36,21 @@ #include #include #include -#include -#include +#include +#include #include +#include +#include #include /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END }; +static unsigned short isa_address = 0x290; /* Insmod parameters */ -SENSORS_INSMOD_2(it87, it8712); +I2C_CLIENT_INSMOD_2(it87, it8712); #define REG 0x2e /* The register to read/write */ #define DEV 0x07 /* Register: Logical device select */ @@ -192,6 +194,7 @@ static int DIV_TO_REG(int val) allocated. */ struct it87_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore lock; enum chips type; @@ -218,7 +221,7 @@ struct it87_data { static int it87_attach_adapter(struct i2c_adapter *adapter); -static int it87_find(int *address); +static int it87_isa_attach_adapter(struct i2c_adapter *adapter); static int it87_detect(struct i2c_adapter *adapter, int address, int kind); static int it87_detach_client(struct i2c_client *client); @@ -239,6 +242,14 @@ static struct i2c_driver it87_driver = { .detach_client = it87_detach_client, }; +static struct i2c_driver it87_isa_driver = { + .owner = THIS_MODULE, + .name = "it87-isa", + .attach_adapter = it87_isa_attach_adapter, + .detach_client = it87_detach_client, +}; + + static ssize_t show_in(struct device *dev, struct device_attribute *attr, char *buf) { @@ -686,11 +697,16 @@ static int it87_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, it87_detect); + return i2c_probe(adapter, &addr_data, it87_detect); } -/* SuperIO detection - will change normal_isa[0] if a chip is found */ -static int it87_find(int *address) +static int it87_isa_attach_adapter(struct i2c_adapter *adapter) +{ + return it87_detect(adapter, isa_address, -1); +} + +/* SuperIO detection - will change isa_address if a chip is found */ +static int __init it87_find(int *address) { int err = -ENODEV; @@ -721,7 +737,7 @@ exit: return err; } -/* This function is called by i2c_detect */ +/* This function is called by i2c_probe */ int it87_detect(struct i2c_adapter *adapter, int address, int kind) { int i; @@ -738,7 +754,7 @@ int it87_detect(struct i2c_adapter *adapter, int address, int kind) /* Reserve the ISA region */ if (is_isa) - if (!request_region(address, IT87_EXTENT, it87_driver.name)) + if (!request_region(address, IT87_EXTENT, it87_isa_driver.name)) goto ERROR0; /* Probe whether there is anything available on this address. Already @@ -784,7 +800,7 @@ int it87_detect(struct i2c_adapter *adapter, int address, int kind) i2c_set_clientdata(new_client, data); new_client->addr = address; new_client->adapter = adapter; - new_client->driver = &it87_driver; + new_client->driver = is_isa ? &it87_isa_driver : &it87_driver; new_client->flags = 0; /* Now, we do the remaining detection. */ @@ -840,6 +856,12 @@ int it87_detect(struct i2c_adapter *adapter, int address, int kind) it87_init_client(new_client, data); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto ERROR3; + } + device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr); device_create_file(&new_client->dev, &sensor_dev_attr_in1_input.dev_attr); device_create_file(&new_client->dev, &sensor_dev_attr_in2_input.dev_attr); @@ -897,13 +919,15 @@ int it87_detect(struct i2c_adapter *adapter, int address, int kind) } if (data->type == it8712) { - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); device_create_file_vrm(new_client); device_create_file_vid(new_client); } return 0; +ERROR3: + i2c_detach_client(new_client); ERROR2: kfree(data); ERROR1: @@ -915,17 +939,17 @@ ERROR0: static int it87_detach_client(struct i2c_client *client) { + struct it87_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); + hwmon_device_unregister(data->class_dev); + + if ((err = i2c_detach_client(client))) return err; - } if(i2c_is_isa_client(client)) release_region(client->addr, IT87_EXTENT); - kfree(i2c_get_clientdata(client)); + kfree(data); return 0; } @@ -1158,16 +1182,28 @@ static struct it87_data *it87_update_device(struct device *dev) static int __init sm_it87_init(void) { - int addr; + int addr, res; if (!it87_find(&addr)) { - normal_isa[0] = addr; + isa_address = addr; } - return i2c_add_driver(&it87_driver); + + res = i2c_add_driver(&it87_driver); + if (res) + return res; + + res = i2c_isa_add_driver(&it87_isa_driver); + if (res) { + i2c_del_driver(&it87_driver); + return res; + } + + return 0; } static void __exit sm_it87_exit(void) { + i2c_isa_del_driver(&it87_isa_driver); i2c_del_driver(&it87_driver); } diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index 7c6f9ea5a254..be5c7095ecbb 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -42,8 +42,9 @@ #include #include #include -#include #include +#include +#include /* * Addresses to scan @@ -51,13 +52,12 @@ */ static unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* * Insmod parameters */ -SENSORS_INSMOD_1(lm63); +I2C_CLIENT_INSMOD_1(lm63); /* * The LM63 registers @@ -152,6 +152,7 @@ static struct i2c_driver lm63_driver = { struct lm63_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -358,7 +359,7 @@ static int lm63_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, lm63_detect); + return i2c_probe(adapter, &addr_data, lm63_detect); } /* @@ -437,6 +438,12 @@ static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) lm63_init_client(new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + if (data->config & 0x04) { /* tachometer enabled */ device_create_file(&new_client->dev, &sensor_dev_attr_fan1_input.dev_attr); @@ -462,6 +469,8 @@ static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -505,15 +514,15 @@ static void lm63_init_client(struct i2c_client *client) static int lm63_detach_client(struct i2c_client *client) { + struct lm63_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached\n"); - return err; - } + hwmon_device_unregister(data->class_dev); - kfree(i2c_get_clientdata(client)); + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); return 0; } diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 5be164ed278e..9a3ebdf583f4 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -23,17 +23,17 @@ #include #include #include -#include +#include +#include #include "lm75.h" /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* Insmod parameters */ -SENSORS_INSMOD_1(lm75); +I2C_CLIENT_INSMOD_1(lm75); /* Many LM75 constants specified below */ @@ -46,6 +46,7 @@ SENSORS_INSMOD_1(lm75); /* Each client has this additional data */ struct lm75_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -107,10 +108,10 @@ static int lm75_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, lm75_detect); + return i2c_probe(adapter, &addr_data, lm75_detect); } -/* This function is called by i2c_detect */ +/* This function is called by i2c_probe */ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) { int i; @@ -119,16 +120,6 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) int err = 0; const char *name = ""; - /* Make sure we aren't probing the ISA bus!! This is just a safety check - at this moment; i2c_detect really won't call us. */ -#ifdef DEBUG - if (i2c_is_isa_adapter(adapter)) { - dev_dbg(&adapter->dev, - "lm75_detect called for an ISA bus adapter?!?\n"); - goto exit; - } -#endif - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) goto exit; @@ -208,12 +199,20 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) lm75_init_client(new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &dev_attr_temp1_max); device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); device_create_file(&new_client->dev, &dev_attr_temp1_input); return 0; +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -222,8 +221,10 @@ exit: static int lm75_detach_client(struct i2c_client *client) { + struct lm75_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->class_dev); i2c_detach_client(client); - kfree(i2c_get_clientdata(client)); + kfree(data); return 0; } @@ -251,8 +252,12 @@ static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value) static void lm75_init_client(struct i2c_client *client) { - /* Initialize the LM75 chip */ - lm75_write_value(client, LM75_REG_CONF, 0); + int reg; + + /* Enable if in shutdown mode */ + reg = lm75_read_value(client, LM75_REG_CONF); + if (reg >= 0 && (reg & 0x01)) + lm75_write_value(client, LM75_REG_CONF, reg & 0xfe); } static struct lm75_data *lm75_update_device(struct device *dev) diff --git a/drivers/hwmon/lm75.h b/drivers/hwmon/lm75.h index 63e3f2fb4c21..af7dc650ee15 100644 --- a/drivers/hwmon/lm75.h +++ b/drivers/hwmon/lm75.h @@ -25,7 +25,7 @@ which contains this code, we don't worry about the wasted space. */ -#include +#include /* straight from the datasheet */ #define LM75_TEMP_MIN (-55000) diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c index b98f44952997..866eab96a6f6 100644 --- a/drivers/hwmon/lm77.c +++ b/drivers/hwmon/lm77.c @@ -30,15 +30,14 @@ #include #include #include -#include - +#include +#include /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* Insmod parameters */ -SENSORS_INSMOD_1(lm77); +I2C_CLIENT_INSMOD_1(lm77); /* The LM77 registers */ #define LM77_REG_TEMP 0x00 @@ -51,6 +50,7 @@ SENSORS_INSMOD_1(lm77); /* Each client has this additional data */ struct lm77_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; unsigned long last_updated; /* In jiffies */ @@ -208,10 +208,10 @@ static int lm77_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, lm77_detect); + return i2c_probe(adapter, &addr_data, lm77_detect); } -/* This function is called by i2c_detect */ +/* This function is called by i2c_probe */ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; @@ -317,6 +317,12 @@ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) lm77_init_client(new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &dev_attr_temp1_input); device_create_file(&new_client->dev, &dev_attr_temp1_crit); device_create_file(&new_client->dev, &dev_attr_temp1_min); @@ -327,6 +333,8 @@ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) device_create_file(&new_client->dev, &dev_attr_alarms); return 0; +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -335,8 +343,10 @@ exit: static int lm77_detach_client(struct i2c_client *client) { + struct lm77_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->class_dev); i2c_detach_client(client); - kfree(i2c_get_clientdata(client)); + kfree(data); return 0; } diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index 29241469dcba..f6730dc3573b 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -23,7 +23,10 @@ #include #include #include -#include +#include +#include +#include +#include #include /* Addresses to scan */ @@ -31,10 +34,10 @@ static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END }; +static unsigned short isa_address = 0x290; /* Insmod parameters */ -SENSORS_INSMOD_3(lm78, lm78j, lm79); +I2C_CLIENT_INSMOD_2(lm78, lm79); /* Many LM78 constants specified below */ @@ -104,13 +107,6 @@ static inline int TEMP_FROM_REG(s8 val) return val * 1000; } -/* VID: mV - REG: (see doc/vid) */ -static inline int VID_FROM_REG(u8 val) -{ - return val==0x1f ? 0 : val>=0x10 ? 5100-val*100 : 2050-val*50; -} - #define DIV_FROM_REG(val) (1 << (val)) /* There are some complications in a module like this. First off, LM78 chips @@ -134,6 +130,7 @@ static inline int VID_FROM_REG(u8 val) allocated. */ struct lm78_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore lock; enum chips type; @@ -156,6 +153,7 @@ struct lm78_data { static int lm78_attach_adapter(struct i2c_adapter *adapter); +static int lm78_isa_attach_adapter(struct i2c_adapter *adapter); static int lm78_detect(struct i2c_adapter *adapter, int address, int kind); static int lm78_detach_client(struct i2c_client *client); @@ -174,6 +172,14 @@ static struct i2c_driver lm78_driver = { .detach_client = lm78_detach_client, }; +static struct i2c_driver lm78_isa_driver = { + .owner = THIS_MODULE, + .name = "lm78-isa", + .attach_adapter = lm78_isa_attach_adapter, + .detach_client = lm78_detach_client, +}; + + /* 7 Voltages */ static ssize_t show_in(struct device *dev, char *buf, int nr) { @@ -445,7 +451,7 @@ static DEVICE_ATTR(fan3_div, S_IRUGO, show_fan_3_div, NULL); static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) { struct lm78_data *data = lm78_update_device(dev); - return sprintf(buf, "%d\n", VID_FROM_REG(data->vid)); + return sprintf(buf, "%d\n", vid_from_reg(82, data->vid)); } static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); @@ -465,10 +471,15 @@ static int lm78_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, lm78_detect); + return i2c_probe(adapter, &addr_data, lm78_detect); } -/* This function is called by i2c_detect */ +static int lm78_isa_attach_adapter(struct i2c_adapter *adapter) +{ + return lm78_detect(adapter, isa_address, -1); +} + +/* This function is called by i2c_probe */ int lm78_detect(struct i2c_adapter *adapter, int address, int kind) { int i, err; @@ -485,7 +496,8 @@ int lm78_detect(struct i2c_adapter *adapter, int address, int kind) /* Reserve the ISA region */ if (is_isa) - if (!request_region(address, LM78_EXTENT, lm78_driver.name)) { + if (!request_region(address, LM78_EXTENT, + lm78_isa_driver.name)) { err = -EBUSY; goto ERROR0; } @@ -540,7 +552,7 @@ int lm78_detect(struct i2c_adapter *adapter, int address, int kind) i2c_set_clientdata(new_client, data); new_client->addr = address; new_client->adapter = adapter; - new_client->driver = &lm78_driver; + new_client->driver = is_isa ? &lm78_isa_driver : &lm78_driver; new_client->flags = 0; /* Now, we do the remaining detection. */ @@ -559,10 +571,9 @@ int lm78_detect(struct i2c_adapter *adapter, int address, int kind) /* Determine the chip type. */ if (kind <= 0) { i = lm78_read_value(new_client, LM78_REG_CHIPID); - if (i == 0x00 || i == 0x20) + if (i == 0x00 || i == 0x20 /* LM78 */ + || i == 0x40) /* LM78-J */ kind = lm78; - else if (i == 0x40) - kind = lm78j; else if ((i & 0xfe) == 0xc0) kind = lm79; else { @@ -578,8 +589,6 @@ int lm78_detect(struct i2c_adapter *adapter, int address, int kind) if (kind == lm78) { client_name = "lm78"; - } else if (kind == lm78j) { - client_name = "lm78-j"; } else if (kind == lm79) { client_name = "lm79"; } @@ -605,6 +614,12 @@ int lm78_detect(struct i2c_adapter *adapter, int address, int kind) } /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto ERROR3; + } + device_create_file(&new_client->dev, &dev_attr_in0_input); device_create_file(&new_client->dev, &dev_attr_in0_min); device_create_file(&new_client->dev, &dev_attr_in0_max); @@ -643,6 +658,8 @@ int lm78_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +ERROR3: + i2c_detach_client(new_client); ERROR2: kfree(data); ERROR1: @@ -654,18 +671,18 @@ ERROR0: static int lm78_detach_client(struct i2c_client *client) { + struct lm78_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); + hwmon_device_unregister(data->class_dev); + + if ((err = i2c_detach_client(client))) return err; - } if(i2c_is_isa_client(client)) release_region(client->addr, LM78_EXTENT); - kfree(i2c_get_clientdata(client)); + kfree(data); return 0; } @@ -777,18 +794,31 @@ static struct lm78_data *lm78_update_device(struct device *dev) static int __init sm_lm78_init(void) { - return i2c_add_driver(&lm78_driver); + int res; + + res = i2c_add_driver(&lm78_driver); + if (res) + return res; + + res = i2c_isa_add_driver(&lm78_isa_driver); + if (res) { + i2c_del_driver(&lm78_driver); + return res; + } + + return 0; } static void __exit sm_lm78_exit(void) { + i2c_isa_del_driver(&lm78_isa_driver); i2c_del_driver(&lm78_driver); } MODULE_AUTHOR("Frodo Looijaard "); -MODULE_DESCRIPTION("LM78, LM78-J and LM79 driver"); +MODULE_DESCRIPTION("LM78/LM79 driver"); MODULE_LICENSE("GPL"); module_init(sm_lm78_init); diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c index 8100595feb44..83af8b3a0cac 100644 --- a/drivers/hwmon/lm80.c +++ b/drivers/hwmon/lm80.c @@ -26,15 +26,15 @@ #include #include #include -#include +#include +#include /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* Insmod parameters */ -SENSORS_INSMOD_1(lm80); +I2C_CLIENT_INSMOD_1(lm80); /* Many LM80 constants specified below */ @@ -107,6 +107,7 @@ static inline long TEMP_FROM_REG(u16 temp) struct lm80_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -389,7 +390,7 @@ static int lm80_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, lm80_detect); + return i2c_probe(adapter, &addr_data, lm80_detect); } int lm80_detect(struct i2c_adapter *adapter, int address, int kind) @@ -451,6 +452,12 @@ int lm80_detect(struct i2c_adapter *adapter, int address, int kind) data->fan_min[1] = lm80_read_value(new_client, LM80_REG_FAN_MIN(2)); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto error_detach; + } + device_create_file(&new_client->dev, &dev_attr_in0_min); device_create_file(&new_client->dev, &dev_attr_in1_min); device_create_file(&new_client->dev, &dev_attr_in2_min); @@ -487,6 +494,8 @@ int lm80_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +error_detach: + i2c_detach_client(new_client); error_free: kfree(data); exit: @@ -495,15 +504,15 @@ exit: static int lm80_detach_client(struct i2c_client *client) { + struct lm80_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } + hwmon_device_unregister(data->class_dev); - kfree(i2c_get_clientdata(client)); + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); return 0; } diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c index a49008b444c8..d74b2c20c719 100644 --- a/drivers/hwmon/lm83.c +++ b/drivers/hwmon/lm83.c @@ -32,8 +32,9 @@ #include #include #include -#include #include +#include +#include /* * Addresses to scan @@ -45,13 +46,12 @@ static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* * Insmod parameters */ -SENSORS_INSMOD_1(lm83); +I2C_CLIENT_INSMOD_1(lm83); /* * The LM83 registers @@ -138,6 +138,7 @@ static struct i2c_driver lm83_driver = { struct lm83_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -212,7 +213,7 @@ static int lm83_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, lm83_detect); + return i2c_probe(adapter, &addr_data, lm83_detect); } /* @@ -312,6 +313,12 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) */ /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr); device_create_file(&new_client->dev, @@ -340,6 +347,8 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -348,15 +357,15 @@ exit: static int lm83_detach_client(struct i2c_client *client) { + struct lm83_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); - return err; - } + hwmon_device_unregister(data->class_dev); - kfree(i2c_get_clientdata(client)); + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); return 0; } diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index b4d7fd418264..ab214df9624b 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -28,15 +28,15 @@ #include #include #include -#include -#include +#include +#include +#include /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* Insmod parameters */ -SENSORS_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); +I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); /* The LM85 registers */ @@ -281,15 +281,6 @@ static int ZONE_TO_REG( int zone ) #define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2)) #define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1) -/* i2c-vid.h defines vid_from_reg() */ -#define VID_FROM_REG(val,vrm) (vid_from_reg((val),(vrm))) - -/* Unlike some other drivers we DO NOT set initial limits. Use - * the config file to set limits. Some users have reported - * motherboards shutting down when we set limits in a previous - * version of the driver. - */ - /* Chip sampling rates * * Some sensors are not updated more frequently than once per second @@ -339,6 +330,7 @@ struct lm85_autofan { struct lm85_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore lock; enum chips type; @@ -1019,7 +1011,7 @@ int lm85_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, lm85_detect); + return i2c_probe(adapter, &addr_data, lm85_detect); } int lm85_detect(struct i2c_adapter *adapter, int address, @@ -1031,11 +1023,6 @@ int lm85_detect(struct i2c_adapter *adapter, int address, int err = 0; const char *type_name = ""; - if (i2c_is_isa_adapter(adapter)) { - /* This chip has no ISA interface */ - goto ERROR0 ; - }; - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { /* We need to be able to do byte I/O */ @@ -1160,12 +1147,18 @@ int lm85_detect(struct i2c_adapter *adapter, int address, goto ERROR1; /* Set the VRM version */ - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); /* Initialize the LM85 chip */ lm85_init_client(new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto ERROR2; + } + device_create_file(&new_client->dev, &dev_attr_fan1_input); device_create_file(&new_client->dev, &dev_attr_fan2_input); device_create_file(&new_client->dev, &dev_attr_fan3_input); @@ -1235,6 +1228,8 @@ int lm85_detect(struct i2c_adapter *adapter, int address, return 0; /* Error out and cleanup code */ + ERROR2: + i2c_detach_client(new_client); ERROR1: kfree(data); ERROR0: @@ -1243,8 +1238,10 @@ int lm85_detect(struct i2c_adapter *adapter, int address, int lm85_detach_client(struct i2c_client *client) { + struct lm85_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->class_dev); i2c_detach_client(client); - kfree(i2c_get_clientdata(client)); + kfree(data); return 0; } diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c index 1921ed1af182..dca996de4c33 100644 --- a/drivers/hwmon/lm87.c +++ b/drivers/hwmon/lm87.c @@ -57,8 +57,9 @@ #include #include #include -#include -#include +#include +#include +#include /* * Addresses to scan @@ -66,13 +67,12 @@ */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* * Insmod parameters */ -SENSORS_INSMOD_1(lm87); +I2C_CLIENT_INSMOD_1(lm87); /* * The LM87 registers @@ -175,6 +175,7 @@ static struct i2c_driver lm87_driver = { struct lm87_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -537,7 +538,7 @@ static int lm87_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, lm87_detect); + return i2c_probe(adapter, &addr_data, lm87_detect); } /* @@ -608,6 +609,12 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) data->in_scale[7] = 1875; /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &dev_attr_in1_input); device_create_file(&new_client->dev, &dev_attr_in1_min); device_create_file(&new_client->dev, &dev_attr_in1_max); @@ -673,6 +680,8 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -685,7 +694,7 @@ static void lm87_init_client(struct i2c_client *client) u8 config; data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE); - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); config = lm87_read_value(client, LM87_REG_CONFIG); if (!(config & 0x01)) { @@ -719,15 +728,15 @@ static void lm87_init_client(struct i2c_client *client) static int lm87_detach_client(struct i2c_client *client) { + struct lm87_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } + hwmon_device_unregister(data->class_dev); - kfree(i2c_get_clientdata(client)); + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); return 0; } diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index a67dcadf7cb0..14de05fcd431 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -75,8 +75,9 @@ #include #include #include -#include #include +#include +#include /* * Addresses to scan @@ -89,13 +90,12 @@ */ static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* * Insmod parameters */ -SENSORS_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461); +I2C_CLIENT_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461); /* * The LM90 registers @@ -200,6 +200,7 @@ static struct i2c_driver lm90_driver = { struct lm90_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -352,7 +353,7 @@ static int lm90_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, lm90_detect); + return i2c_probe(adapter, &addr_data, lm90_detect); } /* @@ -500,6 +501,12 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) lm90_init_client(new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr); device_create_file(&new_client->dev, @@ -524,6 +531,8 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -547,15 +556,15 @@ static void lm90_init_client(struct i2c_client *client) static int lm90_detach_client(struct i2c_client *client) { + struct lm90_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } + hwmon_device_unregister(data->class_dev); - kfree(i2c_get_clientdata(client)); + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); return 0; } diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c index 215c8e40ffdd..647b7c7cd575 100644 --- a/drivers/hwmon/lm92.c +++ b/drivers/hwmon/lm92.c @@ -44,17 +44,16 @@ #include #include #include -#include - +#include +#include /* The LM92 and MAX6635 have 2 two-state pins for address selection, resulting in 4 possible addresses. */ static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* Insmod parameters */ -SENSORS_INSMOD_1(lm92); +I2C_CLIENT_INSMOD_1(lm92); /* The LM92 registers */ #define LM92_REG_CONFIG 0x01 /* 8-bit, RW */ @@ -96,6 +95,7 @@ static struct i2c_driver lm92_driver; /* Client data (each client gets its own) */ struct lm92_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -359,6 +359,12 @@ static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) lm92_init_client(new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &dev_attr_temp1_input); device_create_file(&new_client->dev, &dev_attr_temp1_crit); device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst); @@ -370,6 +376,8 @@ static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -380,20 +388,20 @@ static int lm92_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, lm92_detect); + return i2c_probe(adapter, &addr_data, lm92_detect); } static int lm92_detach_client(struct i2c_client *client) { + struct lm92_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } + hwmon_device_unregister(data->class_dev); - kfree(i2c_get_clientdata(client)); + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); return 0; } diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c index 3c159f1d49ee..16bf71f3a04d 100644 --- a/drivers/hwmon/max1619.c +++ b/drivers/hwmon/max1619.c @@ -31,20 +31,19 @@ #include #include #include -#include - +#include +#include static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* * Insmod parameters */ -SENSORS_INSMOD_1(max1619); +I2C_CLIENT_INSMOD_1(max1619); /* * The MAX1619 registers @@ -104,6 +103,7 @@ static struct i2c_driver max1619_driver = { struct max1619_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -179,7 +179,7 @@ static int max1619_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, max1619_detect); + return i2c_probe(adapter, &addr_data, max1619_detect); } /* @@ -275,6 +275,12 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) max1619_init_client(new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &dev_attr_temp1_input); device_create_file(&new_client->dev, &dev_attr_temp2_input); device_create_file(&new_client->dev, &dev_attr_temp2_min); @@ -285,6 +291,8 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -308,15 +316,15 @@ static void max1619_init_client(struct i2c_client *client) static int max1619_detach_client(struct i2c_client *client) { + struct max1619_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } + hwmon_device_unregister(data->class_dev); - kfree(i2c_get_clientdata(client)); + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); return 0; } diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c index fa4032d53b79..cf2a35799c7c 100644 --- a/drivers/hwmon/pc87360.c +++ b/drivers/hwmon/pc87360.c @@ -38,23 +38,19 @@ #include #include #include -#include -#include +#include +#include +#include +#include +#include #include -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END }; -static struct i2c_force_data forces[] = {{ NULL }}; static u8 devid; -static unsigned int extra_isa[3]; +static unsigned short address; +static unsigned short extra_isa[3]; static u8 confreg[4]; enum chips { any_chip, pc87360, pc87363, pc87364, pc87365, pc87366 }; -static struct i2c_address_data addr_data = { - .normal_i2c = normal_i2c, - .normal_isa = normal_isa, - .forces = forces, -}; static int init = 1; module_param(init, int, 0); @@ -186,6 +182,7 @@ static inline u8 PWM_TO_REG(int val, int inv) struct pc87360_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore lock; struct semaphore update_lock; char valid; /* !=0 if following fields are valid */ @@ -224,8 +221,7 @@ struct pc87360_data { * Functions declaration */ -static int pc87360_attach_adapter(struct i2c_adapter *adapter); -static int pc87360_detect(struct i2c_adapter *adapter, int address, int kind); +static int pc87360_detect(struct i2c_adapter *adapter); static int pc87360_detach_client(struct i2c_client *client); static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank, @@ -242,8 +238,7 @@ static struct pc87360_data *pc87360_update_device(struct device *dev); static struct i2c_driver pc87360_driver = { .owner = THIS_MODULE, .name = "pc87360", - .flags = I2C_DF_NOTIFY, - .attach_adapter = pc87360_attach_adapter, + .attach_adapter = pc87360_detect, .detach_client = pc87360_detach_client, }; @@ -251,168 +246,178 @@ static struct i2c_driver pc87360_driver = { * Sysfs stuff */ -static ssize_t set_fan_min(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t show_fan_input(struct device *dev, struct device_attribute *devattr, char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan[attr->index], + FAN_DIV_FROM_REG(data->fan_status[attr->index]))); +} +static ssize_t show_fan_min(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan_min[attr->index], + FAN_DIV_FROM_REG(data->fan_status[attr->index]))); +} +static ssize_t show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", + FAN_DIV_FROM_REG(data->fan_status[attr->index])); +} +static ssize_t show_fan_status(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", + FAN_STATUS_FROM_REG(data->fan_status[attr->index])); +} +static ssize_t set_fan_min(struct device *dev, struct device_attribute *devattr, const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct pc87360_data *data = i2c_get_clientdata(client); long fan_min = simple_strtol(buf, NULL, 10); down(&data->update_lock); - fan_min = FAN_TO_REG(fan_min, FAN_DIV_FROM_REG(data->fan_status[nr])); + fan_min = FAN_TO_REG(fan_min, FAN_DIV_FROM_REG(data->fan_status[attr->index])); /* If it wouldn't fit, change clock divisor */ while (fan_min > 255 - && (data->fan_status[nr] & 0x60) != 0x60) { + && (data->fan_status[attr->index] & 0x60) != 0x60) { fan_min >>= 1; - data->fan[nr] >>= 1; - data->fan_status[nr] += 0x20; + data->fan[attr->index] >>= 1; + data->fan_status[attr->index] += 0x20; } - data->fan_min[nr] = fan_min > 255 ? 255 : fan_min; - pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_MIN(nr), - data->fan_min[nr]); + data->fan_min[attr->index] = fan_min > 255 ? 255 : fan_min; + pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_MIN(attr->index), + data->fan_min[attr->index]); /* Write new divider, preserve alarm bits */ - pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_STATUS(nr), - data->fan_status[nr] & 0xF9); + pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_STATUS(attr->index), + data->fan_status[attr->index] & 0xF9); up(&data->update_lock); return count; } #define show_and_set_fan(offset) \ -static ssize_t show_fan##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan[offset-1], \ - FAN_DIV_FROM_REG(data->fan_status[offset-1]))); \ -} \ -static ssize_t show_fan##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan_min[offset-1], \ - FAN_DIV_FROM_REG(data->fan_status[offset-1]))); \ -} \ -static ssize_t show_fan##offset##_div(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", \ - FAN_DIV_FROM_REG(data->fan_status[offset-1])); \ -} \ -static ssize_t show_fan##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", \ - FAN_STATUS_FROM_REG(data->fan_status[offset-1])); \ -} \ -static ssize_t set_fan##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - return set_fan_min(dev, buf, count, offset-1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan##offset##_input, NULL); \ -static DEVICE_ATTR(fan##offset##_min, S_IWUSR | S_IRUGO, \ - show_fan##offset##_min, set_fan##offset##_min); \ -static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \ - show_fan##offset##_div, NULL); \ -static DEVICE_ATTR(fan##offset##_status, S_IRUGO, \ - show_fan##offset##_status, NULL); +static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ + show_fan_input, NULL, offset-1); \ +static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IWUSR | S_IRUGO, \ + show_fan_min, set_fan_min, offset-1); \ +static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO, \ + show_fan_div, NULL, offset-1); \ +static SENSOR_DEVICE_ATTR(fan##offset##_status, S_IRUGO, \ + show_fan_status, NULL, offset-1); show_and_set_fan(1) show_and_set_fan(2) show_and_set_fan(3) +static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", + PWM_FROM_REG(data->pwm[attr->index], + FAN_CONFIG_INVERT(data->fan_conf, + attr->index))); +} +static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct pc87360_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->pwm[attr->index] = PWM_TO_REG(val, + FAN_CONFIG_INVERT(data->fan_conf, attr->index)); + pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_PWM(attr->index), + data->pwm[attr->index]); + up(&data->update_lock); + return count; +} + #define show_and_set_pwm(offset) \ -static ssize_t show_pwm##offset(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", \ - PWM_FROM_REG(data->pwm[offset-1], \ - FAN_CONFIG_INVERT(data->fan_conf, \ - offset-1))); \ -} \ -static ssize_t set_pwm##offset(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->pwm[offset-1] = PWM_TO_REG(val, \ - FAN_CONFIG_INVERT(data->fan_conf, offset-1)); \ - pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_PWM(offset-1), \ - data->pwm[offset-1]); \ - up(&data->update_lock); \ - return count; \ -} \ -static DEVICE_ATTR(pwm##offset, S_IWUSR | S_IRUGO, \ - show_pwm##offset, set_pwm##offset); +static SENSOR_DEVICE_ATTR(pwm##offset, S_IWUSR | S_IRUGO, \ + show_pwm, set_pwm, offset-1); show_and_set_pwm(1) show_and_set_pwm(2) show_and_set_pwm(3) +static ssize_t show_in_input(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", IN_FROM_REG(data->in[attr->index], + data->in_vref)); +} +static ssize_t show_in_min(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[attr->index], + data->in_vref)); +} +static ssize_t show_in_max(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[attr->index], + data->in_vref)); +} +static ssize_t show_in_status(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", data->in_status[attr->index]); +} +static ssize_t set_in_min(struct device *dev, struct device_attribute *devattr, const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct pc87360_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->in_min[attr->index] = IN_TO_REG(val, data->in_vref); + pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_IN_MIN, + data->in_min[attr->index]); + up(&data->update_lock); + return count; +} +static ssize_t set_in_max(struct device *dev, struct device_attribute *devattr, const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct pc87360_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->in_max[attr->index] = IN_TO_REG(val, + data->in_vref); + pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_IN_MAX, + data->in_max[attr->index]); + up(&data->update_lock); + return count; +} + #define show_and_set_in(offset) \ -static ssize_t show_in##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \ - data->in_vref)); \ -} \ -static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \ - data->in_vref)); \ -} \ -static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \ - data->in_vref)); \ -} \ -static ssize_t show_in##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", data->in_status[offset]); \ -} \ -static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->in_min[offset] = IN_TO_REG(val, data->in_vref); \ - pc87360_write_value(data, LD_IN, offset, PC87365_REG_IN_MIN, \ - data->in_min[offset]); \ - up(&data->update_lock); \ - return count; \ -} \ -static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->in_max[offset] = IN_TO_REG(val, \ - data->in_vref); \ - pc87360_write_value(data, LD_IN, offset, PC87365_REG_IN_MAX, \ - data->in_max[offset]); \ - up(&data->update_lock); \ - return count; \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in##offset##_input, NULL); \ -static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \ - show_in##offset##_min, set_in##offset##_min); \ -static DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \ - show_in##offset##_max, set_in##offset##_max); \ -static DEVICE_ATTR(in##offset##_status, S_IRUGO, \ - show_in##offset##_status, NULL); +static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ + show_in_input, NULL, offset); \ +static SENSOR_DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \ + show_in_min, set_in_min, offset); \ +static SENSOR_DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \ + show_in_max, set_in_max, offset); \ +static SENSOR_DEVICE_ATTR(in##offset##_status, S_IRUGO, \ + show_in_status, NULL, offset); show_and_set_in(0) show_and_set_in(1) show_and_set_in(2) @@ -425,88 +430,97 @@ show_and_set_in(8) show_and_set_in(9) show_and_set_in(10) +static ssize_t show_therm_input(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", IN_FROM_REG(data->in[attr->index], + data->in_vref)); +} +static ssize_t show_therm_min(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[attr->index], + data->in_vref)); +} +static ssize_t show_therm_max(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[attr->index], + data->in_vref)); +} +static ssize_t show_therm_crit(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_crit[attr->index-11], + data->in_vref)); +} +static ssize_t show_therm_status(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%u\n", data->in_status[attr->index]); +} +static ssize_t set_therm_min(struct device *dev, struct device_attribute *devattr, const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct pc87360_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->in_min[attr->index] = IN_TO_REG(val, data->in_vref); + pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_MIN, + data->in_min[attr->index]); + up(&data->update_lock); + return count; +} +static ssize_t set_therm_max(struct device *dev, struct device_attribute *devattr, const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct pc87360_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->in_max[attr->index] = IN_TO_REG(val, data->in_vref); + pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_MAX, + data->in_max[attr->index]); + up(&data->update_lock); + return count; +} +static ssize_t set_therm_crit(struct device *dev, struct device_attribute *devattr, const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct pc87360_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->in_crit[attr->index-11] = IN_TO_REG(val, data->in_vref); + pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_CRIT, + data->in_crit[attr->index-11]); + up(&data->update_lock); + return count; +} + #define show_and_set_therm(offset) \ -static ssize_t show_temp##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset+7], \ - data->in_vref)); \ -} \ -static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset+7], \ - data->in_vref)); \ -} \ -static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset+7], \ - data->in_vref)); \ -} \ -static ssize_t show_temp##offset##_crit(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in_crit[offset-4], \ - data->in_vref)); \ -} \ -static ssize_t show_temp##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", data->in_status[offset+7]); \ -} \ -static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->in_min[offset+7] = IN_TO_REG(val, data->in_vref); \ - pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_MIN, \ - data->in_min[offset+7]); \ - up(&data->update_lock); \ - return count; \ -} \ -static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->in_max[offset+7] = IN_TO_REG(val, data->in_vref); \ - pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_MAX, \ - data->in_max[offset+7]); \ - up(&data->update_lock); \ - return count; \ -} \ -static ssize_t set_temp##offset##_crit(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->in_crit[offset-4] = IN_TO_REG(val, data->in_vref); \ - pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_CRIT, \ - data->in_crit[offset-4]); \ - up(&data->update_lock); \ - return count; \ -} \ -static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp##offset##_input, NULL); \ -static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \ - show_temp##offset##_min, set_temp##offset##_min); \ -static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \ - show_temp##offset##_max, set_temp##offset##_max); \ -static DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \ - show_temp##offset##_crit, set_temp##offset##_crit); \ -static DEVICE_ATTR(temp##offset##_status, S_IRUGO, \ - show_temp##offset##_status, NULL); +static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ + show_therm_input, NULL, 11+offset-4); \ +static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \ + show_therm_min, set_therm_min, 11+offset-4); \ +static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \ + show_therm_max, set_therm_max, 11+offset-4); \ +static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \ + show_therm_crit, set_therm_crit, 11+offset-4); \ +static SENSOR_DEVICE_ATTR(temp##offset##_status, S_IRUGO, \ + show_therm_status, NULL, 11+offset-4); show_and_set_therm(4) show_and_set_therm(5) show_and_set_therm(6) @@ -539,84 +553,93 @@ static ssize_t show_in_alarms(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR(alarms_in, S_IRUGO, show_in_alarms, NULL); +static ssize_t show_temp_input(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); +} +static ssize_t show_temp_min(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[attr->index])); +} +static ssize_t show_temp_max(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[attr->index])); +} +static ssize_t show_temp_crit(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[attr->index])); +} +static ssize_t show_temp_status(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pc87360_data *data = pc87360_update_device(dev); + return sprintf(buf, "%d\n", data->temp_status[attr->index]); +} +static ssize_t set_temp_min(struct device *dev, struct device_attribute *devattr, const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct pc87360_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_min[attr->index] = TEMP_TO_REG(val); + pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_MIN, + data->temp_min[attr->index]); + up(&data->update_lock); + return count; +} +static ssize_t set_temp_max(struct device *dev, struct device_attribute *devattr, const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct pc87360_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_max[attr->index] = TEMP_TO_REG(val); + pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_MAX, + data->temp_max[attr->index]); + up(&data->update_lock); + return count; +} +static ssize_t set_temp_crit(struct device *dev, struct device_attribute *devattr, const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct pc87360_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_crit[attr->index] = TEMP_TO_REG(val); + pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_CRIT, + data->temp_crit[attr->index]); + up(&data->update_lock); + return count; +} + #define show_and_set_temp(offset) \ -static ssize_t show_temp##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \ -} \ -static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \ -} \ -static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \ -}\ -static ssize_t show_temp##offset##_crit(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[offset-1])); \ -}\ -static ssize_t show_temp##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%d\n", data->temp_status[offset-1]); \ -}\ -static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->temp_min[offset-1] = TEMP_TO_REG(val); \ - pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_MIN, \ - data->temp_min[offset-1]); \ - up(&data->update_lock); \ - return count; \ -} \ -static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->temp_max[offset-1] = TEMP_TO_REG(val); \ - pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_MAX, \ - data->temp_max[offset-1]); \ - up(&data->update_lock); \ - return count; \ -} \ -static ssize_t set_temp##offset##_crit(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->temp_crit[offset-1] = TEMP_TO_REG(val); \ - pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_CRIT, \ - data->temp_crit[offset-1]); \ - up(&data->update_lock); \ - return count; \ -} \ -static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp##offset##_input, NULL); \ -static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \ - show_temp##offset##_min, set_temp##offset##_min); \ -static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \ - show_temp##offset##_max, set_temp##offset##_max); \ -static DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \ - show_temp##offset##_crit, set_temp##offset##_crit); \ -static DEVICE_ATTR(temp##offset##_status, S_IRUGO, \ - show_temp##offset##_status, NULL); +static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ + show_temp_input, NULL, offset-1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \ + show_temp_min, set_temp_min, offset-1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \ + show_temp_max, set_temp_max, offset-1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \ + show_temp_crit, set_temp_crit, offset-1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_status, S_IRUGO, \ + show_temp_status, NULL, offset-1); show_and_set_temp(1) show_and_set_temp(2) show_and_set_temp(3) @@ -632,12 +655,7 @@ static DEVICE_ATTR(alarms_temp, S_IRUGO, show_temp_alarms, NULL); * Device detection, registration and update */ -static int pc87360_attach_adapter(struct i2c_adapter *adapter) -{ - return i2c_detect(adapter, &addr_data, pc87360_detect); -} - -static int pc87360_find(int sioaddr, u8 *devid, int *address) +static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses) { u16 val; int i; @@ -683,7 +701,7 @@ static int pc87360_find(int sioaddr, u8 *devid, int *address) continue; } - address[i] = val; + addresses[i] = val; if (i==0) { /* Fans */ confreg[0] = superio_inb(sioaddr, 0xF0); @@ -727,9 +745,7 @@ static int pc87360_find(int sioaddr, u8 *devid, int *address) return 0; } -/* We don't really care about the address. - Read from extra_isa instead. */ -int pc87360_detect(struct i2c_adapter *adapter, int address, int kind) +static int pc87360_detect(struct i2c_adapter *adapter) { int i; struct i2c_client *new_client; @@ -738,9 +754,6 @@ int pc87360_detect(struct i2c_adapter *adapter, int address, int kind) const char *name = "pc87360"; int use_thermistors = 0; - if (!i2c_is_isa_adapter(adapter)) - return -ENODEV; - if (!(data = kmalloc(sizeof(struct pc87360_data), GFP_KERNEL))) return -ENOMEM; memset(data, 0x00, sizeof(struct pc87360_data)); @@ -838,51 +851,57 @@ int pc87360_detect(struct i2c_adapter *adapter, int address, int kind) } /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto ERROR3; + } + if (data->innr) { - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in5_input); - device_create_file(&new_client->dev, &dev_attr_in6_input); - device_create_file(&new_client->dev, &dev_attr_in7_input); - device_create_file(&new_client->dev, &dev_attr_in8_input); - device_create_file(&new_client->dev, &dev_attr_in9_input); - device_create_file(&new_client->dev, &dev_attr_in10_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in5_min); - device_create_file(&new_client->dev, &dev_attr_in6_min); - device_create_file(&new_client->dev, &dev_attr_in7_min); - device_create_file(&new_client->dev, &dev_attr_in8_min); - device_create_file(&new_client->dev, &dev_attr_in9_min); - device_create_file(&new_client->dev, &dev_attr_in10_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_max); - device_create_file(&new_client->dev, &dev_attr_in5_max); - device_create_file(&new_client->dev, &dev_attr_in6_max); - device_create_file(&new_client->dev, &dev_attr_in7_max); - device_create_file(&new_client->dev, &dev_attr_in8_max); - device_create_file(&new_client->dev, &dev_attr_in9_max); - device_create_file(&new_client->dev, &dev_attr_in10_max); - device_create_file(&new_client->dev, &dev_attr_in0_status); - device_create_file(&new_client->dev, &dev_attr_in1_status); - device_create_file(&new_client->dev, &dev_attr_in2_status); - device_create_file(&new_client->dev, &dev_attr_in3_status); - device_create_file(&new_client->dev, &dev_attr_in4_status); - device_create_file(&new_client->dev, &dev_attr_in5_status); - device_create_file(&new_client->dev, &dev_attr_in6_status); - device_create_file(&new_client->dev, &dev_attr_in7_status); - device_create_file(&new_client->dev, &dev_attr_in8_status); - device_create_file(&new_client->dev, &dev_attr_in9_status); - device_create_file(&new_client->dev, &dev_attr_in10_status); + device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in1_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in2_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in3_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in4_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in5_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in6_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in7_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in8_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in9_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in10_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in0_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in1_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in2_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in3_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in4_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in5_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in6_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in7_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in8_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in9_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in10_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in0_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in1_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in2_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in3_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in4_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in5_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in6_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in7_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in8_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in9_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in10_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in0_status.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in1_status.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in2_status.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in3_status.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in4_status.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in5_status.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in6_status.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in7_status.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in8_status.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in9_status.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in10_status.dev_attr); device_create_file(&new_client->dev, &dev_attr_cpu0_vid); device_create_file(&new_client->dev, &dev_attr_vrm); @@ -890,90 +909,92 @@ int pc87360_detect(struct i2c_adapter *adapter, int address, int kind) } if (data->tempnr) { - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp1_crit); - device_create_file(&new_client->dev, &dev_attr_temp2_crit); - device_create_file(&new_client->dev, &dev_attr_temp1_status); - device_create_file(&new_client->dev, &dev_attr_temp2_status); + device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp2_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp1_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp2_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp2_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp1_crit.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp2_crit.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp1_status.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp2_status.dev_attr); device_create_file(&new_client->dev, &dev_attr_alarms_temp); } if (data->tempnr == 3) { - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp3_min); - device_create_file(&new_client->dev, &dev_attr_temp3_max); - device_create_file(&new_client->dev, &dev_attr_temp3_crit); - device_create_file(&new_client->dev, &dev_attr_temp3_status); + device_create_file(&new_client->dev, &sensor_dev_attr_temp3_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp3_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp3_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp3_crit.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp3_status.dev_attr); } if (data->innr == 14) { - device_create_file(&new_client->dev, &dev_attr_temp4_input); - device_create_file(&new_client->dev, &dev_attr_temp5_input); - device_create_file(&new_client->dev, &dev_attr_temp6_input); - device_create_file(&new_client->dev, &dev_attr_temp4_min); - device_create_file(&new_client->dev, &dev_attr_temp5_min); - device_create_file(&new_client->dev, &dev_attr_temp6_min); - device_create_file(&new_client->dev, &dev_attr_temp4_max); - device_create_file(&new_client->dev, &dev_attr_temp5_max); - device_create_file(&new_client->dev, &dev_attr_temp6_max); - device_create_file(&new_client->dev, &dev_attr_temp4_crit); - device_create_file(&new_client->dev, &dev_attr_temp5_crit); - device_create_file(&new_client->dev, &dev_attr_temp6_crit); - device_create_file(&new_client->dev, &dev_attr_temp4_status); - device_create_file(&new_client->dev, &dev_attr_temp5_status); - device_create_file(&new_client->dev, &dev_attr_temp6_status); + device_create_file(&new_client->dev, &sensor_dev_attr_temp4_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp5_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp6_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp4_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp5_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp6_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp4_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp5_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp6_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp4_crit.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp5_crit.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp6_crit.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp4_status.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp5_status.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp6_status.dev_attr); } if (data->fannr) { if (FAN_CONFIG_MONITOR(data->fan_conf, 0)) { device_create_file(&new_client->dev, - &dev_attr_fan1_input); + &sensor_dev_attr_fan1_input.dev_attr); device_create_file(&new_client->dev, - &dev_attr_fan1_min); + &sensor_dev_attr_fan1_min.dev_attr); device_create_file(&new_client->dev, - &dev_attr_fan1_div); + &sensor_dev_attr_fan1_div.dev_attr); device_create_file(&new_client->dev, - &dev_attr_fan1_status); + &sensor_dev_attr_fan1_status.dev_attr); } if (FAN_CONFIG_MONITOR(data->fan_conf, 1)) { device_create_file(&new_client->dev, - &dev_attr_fan2_input); + &sensor_dev_attr_fan2_input.dev_attr); device_create_file(&new_client->dev, - &dev_attr_fan2_min); + &sensor_dev_attr_fan2_min.dev_attr); device_create_file(&new_client->dev, - &dev_attr_fan2_div); + &sensor_dev_attr_fan2_div.dev_attr); device_create_file(&new_client->dev, - &dev_attr_fan2_status); + &sensor_dev_attr_fan2_status.dev_attr); } if (FAN_CONFIG_CONTROL(data->fan_conf, 0)) - device_create_file(&new_client->dev, &dev_attr_pwm1); + device_create_file(&new_client->dev, &sensor_dev_attr_pwm1.dev_attr); if (FAN_CONFIG_CONTROL(data->fan_conf, 1)) - device_create_file(&new_client->dev, &dev_attr_pwm2); + device_create_file(&new_client->dev, &sensor_dev_attr_pwm2.dev_attr); } if (data->fannr == 3) { if (FAN_CONFIG_MONITOR(data->fan_conf, 2)) { device_create_file(&new_client->dev, - &dev_attr_fan3_input); + &sensor_dev_attr_fan3_input.dev_attr); device_create_file(&new_client->dev, - &dev_attr_fan3_min); + &sensor_dev_attr_fan3_min.dev_attr); device_create_file(&new_client->dev, - &dev_attr_fan3_div); + &sensor_dev_attr_fan3_div.dev_attr); device_create_file(&new_client->dev, - &dev_attr_fan3_status); + &sensor_dev_attr_fan3_status.dev_attr); } if (FAN_CONFIG_CONTROL(data->fan_conf, 2)) - device_create_file(&new_client->dev, &dev_attr_pwm3); + device_create_file(&new_client->dev, &sensor_dev_attr_pwm3.dev_attr); } return 0; +ERROR3: + i2c_detach_client(new_client); ERROR2: for (i = 0; i < 3; i++) { if (data->address[i]) { @@ -990,11 +1011,10 @@ static int pc87360_detach_client(struct i2c_client *client) struct pc87360_data *data = i2c_get_clientdata(client); int i; - if ((i = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); + hwmon_device_unregister(data->class_dev); + + if ((i = i2c_detach_client(client))) return i; - } for (i = 0; i < 3; i++) { if (data->address[i]) { @@ -1320,23 +1340,23 @@ static int __init pc87360_init(void) /* Arbitrarily pick one of the addresses */ for (i = 0; i < 3; i++) { if (extra_isa[i] != 0x0000) { - normal_isa[0] = extra_isa[i]; + address = extra_isa[i]; break; } } - if (normal_isa[0] == 0x0000) { + if (address == 0x0000) { printk(KERN_WARNING "pc87360: No active logical device, " "module not inserted.\n"); return -ENODEV; } - return i2c_add_driver(&pc87360_driver); + return i2c_isa_add_driver(&pc87360_driver); } static void __exit pc87360_exit(void) { - i2c_del_driver(&pc87360_driver); + i2c_isa_del_driver(&pc87360_driver); } diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c index 6bbfc8fb4f13..8610bce08244 100644 --- a/drivers/hwmon/sis5595.c +++ b/drivers/hwmon/sis5595.c @@ -55,7 +55,9 @@ #include #include #include -#include +#include +#include +#include #include #include #include @@ -68,14 +70,10 @@ module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the sensors"); -/* Addresses to scan. +/* Device address Note that we can't determine the ISA address until we have initialized our module */ -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(sis5595); +static unsigned short address; /* Many SIS5595 constants specified below */ @@ -168,6 +166,7 @@ static inline u8 DIV_TO_REG(int val) allocated. */ struct sis5595_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore lock; struct semaphore update_lock; @@ -190,8 +189,7 @@ struct sis5595_data { static struct pci_dev *s_bridge; /* pointer to the (only) sis5595 */ -static int sis5595_attach_adapter(struct i2c_adapter *adapter); -static int sis5595_detect(struct i2c_adapter *adapter, int address, int kind); +static int sis5595_detect(struct i2c_adapter *adapter); static int sis5595_detach_client(struct i2c_client *client); static int sis5595_read_value(struct i2c_client *client, u8 register); @@ -202,9 +200,7 @@ static void sis5595_init_client(struct i2c_client *client); static struct i2c_driver sis5595_driver = { .owner = THIS_MODULE, .name = "sis5595", - .id = I2C_DRIVERID_SIS5595, - .flags = I2C_DF_NOTIFY, - .attach_adapter = sis5595_attach_adapter, + .attach_adapter = sis5595_detect, .detach_client = sis5595_detach_client, }; @@ -476,14 +472,7 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, ch static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); /* This is called when the module is loaded */ -static int sis5595_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, sis5595_detect); -} - -int sis5595_detect(struct i2c_adapter *adapter, int address, int kind) +static int sis5595_detect(struct i2c_adapter *adapter) { int err = 0; int i; @@ -492,10 +481,6 @@ int sis5595_detect(struct i2c_adapter *adapter, int address, int kind) char val; u16 a; - /* Make sure we are probing the ISA bus!! */ - if (!i2c_is_isa_adapter(adapter)) - goto exit; - if (force_addr) address = force_addr & ~(SIS5595_EXTENT - 1); /* Reserve the ISA region */ @@ -578,6 +563,12 @@ int sis5595_detect(struct i2c_adapter *adapter, int address, int kind) } /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &dev_attr_in0_input); device_create_file(&new_client->dev, &dev_attr_in0_min); device_create_file(&new_client->dev, &dev_attr_in0_max); @@ -608,7 +599,9 @@ int sis5595_detect(struct i2c_adapter *adapter, int address, int kind) device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); } return 0; - + +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit_release: @@ -619,18 +612,17 @@ exit: static int sis5595_detach_client(struct i2c_client *client) { + struct sis5595_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); + hwmon_device_unregister(data->class_dev); + + if ((err = i2c_detach_client(client))) return err; - } - if (i2c_is_isa_client(client)) - release_region(client->addr, SIS5595_EXTENT); + release_region(client->addr, SIS5595_EXTENT); - kfree(i2c_get_clientdata(client)); + kfree(data); return 0; } @@ -745,7 +737,6 @@ static int __devinit sis5595_pci_probe(struct pci_dev *dev, { u16 val; int *i; - int addr = 0; for (i = blacklist; *i != 0; i++) { struct pci_dev *dev; @@ -761,22 +752,19 @@ static int __devinit sis5595_pci_probe(struct pci_dev *dev, pci_read_config_word(dev, SIS5595_BASE_REG, &val)) return -ENODEV; - addr = val & ~(SIS5595_EXTENT - 1); - if (addr == 0 && force_addr == 0) { + address = val & ~(SIS5595_EXTENT - 1); + if (address == 0 && force_addr == 0) { dev_err(&dev->dev, "Base address not set - upgrade BIOS or use force_addr=0xaddr\n"); return -ENODEV; } - if (force_addr) - addr = force_addr; /* so detect will get called */ - if (!addr) { + if (!address) { dev_err(&dev->dev,"No SiS 5595 sensors found.\n"); return -ENODEV; } - normal_isa[0] = addr; s_bridge = pci_dev_get(dev); - if (i2c_add_driver(&sis5595_driver)) { + if (i2c_isa_add_driver(&sis5595_driver)) { pci_dev_put(s_bridge); s_bridge = NULL; } @@ -803,7 +791,7 @@ static void __exit sm_sis5595_exit(void) { pci_unregister_driver(&sis5595_pci_driver); if (s_bridge != NULL) { - i2c_del_driver(&sis5595_driver); + i2c_isa_del_driver(&sis5595_driver); pci_dev_put(s_bridge); s_bridge = NULL; } diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index fdeeb3ab6f2f..7fe71576dea4 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -31,23 +31,14 @@ #include #include #include -#include +#include +#include +#include #include #include -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; /* Address is autodetected, there is no default value */ -static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END }; -static struct i2c_force_data forces[] = {{NULL}}; - -enum chips { any_chip, smsc47b397 }; -static struct i2c_address_data addr_data = { - .normal_i2c = normal_i2c, - .normal_isa = normal_isa, - .probe = normal_i2c, /* cheat */ - .ignore = normal_i2c, /* cheat */ - .forces = forces, -}; +static unsigned short address; /* Super-I/0 registers and commands */ @@ -100,6 +91,7 @@ static u8 smsc47b397_reg_temp[] = {0x25, 0x26, 0x27, 0x80}; struct smsc47b397_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore lock; struct semaphore update_lock; @@ -215,52 +207,40 @@ sysfs_fan(4); #define device_create_file_fan(client, num) \ device_create_file(&client->dev, &dev_attr_fan##num##_input) -static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind); - -static int smsc47b397_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, smsc47b397_detect); -} - static int smsc47b397_detach_client(struct i2c_client *client) { + struct smsc47b397_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); + hwmon_device_unregister(data->class_dev); + + if ((err = i2c_detach_client(client))) return err; - } release_region(client->addr, SMSC_EXTENT); - kfree(i2c_get_clientdata(client)); + kfree(data); return 0; } +static int smsc47b397_detect(struct i2c_adapter *adapter); + static struct i2c_driver smsc47b397_driver = { .owner = THIS_MODULE, .name = "smsc47b397", - .id = I2C_DRIVERID_SMSC47B397, - .flags = I2C_DF_NOTIFY, - .attach_adapter = smsc47b397_attach_adapter, + .attach_adapter = smsc47b397_detect, .detach_client = smsc47b397_detach_client, }; -static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind) +static int smsc47b397_detect(struct i2c_adapter *adapter) { struct i2c_client *new_client; struct smsc47b397_data *data; int err = 0; - if (!i2c_is_isa_adapter(adapter)) { - return 0; - } - - if (!request_region(addr, SMSC_EXTENT, smsc47b397_driver.name)) { - dev_err(&adapter->dev, "Region 0x%x already in use!\n", addr); + if (!request_region(address, SMSC_EXTENT, smsc47b397_driver.name)) { + dev_err(&adapter->dev, "Region 0x%x already in use!\n", + address); return -EBUSY; } @@ -272,7 +252,7 @@ static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind) new_client = &data->client; i2c_set_clientdata(new_client, data); - new_client->addr = addr; + new_client->addr = address; init_MUTEX(&data->lock); new_client->adapter = adapter; new_client->driver = &smsc47b397_driver; @@ -285,6 +265,12 @@ static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind) if ((err = i2c_attach_client(new_client))) goto error_free; + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto error_detach; + } + device_create_file_temp(new_client, 1); device_create_file_temp(new_client, 2); device_create_file_temp(new_client, 3); @@ -297,14 +283,16 @@ static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind) return 0; +error_detach: + i2c_detach_client(new_client); error_free: kfree(data); error_release: - release_region(addr, SMSC_EXTENT); + release_region(address, SMSC_EXTENT); return err; } -static int __init smsc47b397_find(unsigned int *addr) +static int __init smsc47b397_find(unsigned short *addr) { u8 id, rev; @@ -333,15 +321,15 @@ static int __init smsc47b397_init(void) { int ret; - if ((ret = smsc47b397_find(normal_isa))) + if ((ret = smsc47b397_find(&address))) return ret; - return i2c_add_driver(&smsc47b397_driver); + return i2c_isa_add_driver(&smsc47b397_driver); } static void __exit smsc47b397_exit(void) { - i2c_del_driver(&smsc47b397_driver); + i2c_isa_del_driver(&smsc47b397_driver); } MODULE_AUTHOR("Mark M. Hoffman "); diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index 7166ad0b2fda..7e699a8ede26 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -30,21 +30,14 @@ #include #include #include -#include +#include +#include +#include #include #include -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; /* Address is autodetected, there is no default value */ -static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END }; -static struct i2c_force_data forces[] = {{NULL}}; - -enum chips { any_chip, smsc47m1 }; -static struct i2c_address_data addr_data = { - .normal_i2c = normal_i2c, - .normal_isa = normal_isa, - .forces = forces, -}; +static unsigned short address; /* Super-I/0 registers and commands */ @@ -108,6 +101,7 @@ superio_exit(void) struct smsc47m1_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore lock; struct semaphore update_lock; @@ -121,9 +115,7 @@ struct smsc47m1_data { }; -static int smsc47m1_attach_adapter(struct i2c_adapter *adapter); -static int smsc47m1_find(int *address); -static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind); +static int smsc47m1_detect(struct i2c_adapter *adapter); static int smsc47m1_detach_client(struct i2c_client *client); static int smsc47m1_read_value(struct i2c_client *client, u8 reg); @@ -136,9 +128,7 @@ static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, static struct i2c_driver smsc47m1_driver = { .owner = THIS_MODULE, .name = "smsc47m1", - .id = I2C_DRIVERID_SMSC47M1, - .flags = I2C_DF_NOTIFY, - .attach_adapter = smsc47m1_attach_adapter, + .attach_adapter = smsc47m1_detect, .detach_client = smsc47m1_detach_client, }; @@ -354,14 +344,7 @@ fan_present(2); static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL); -static int smsc47m1_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, smsc47m1_detect); -} - -static int smsc47m1_find(int *address) +static int __init smsc47m1_find(unsigned short *addr) { u8 val; @@ -388,10 +371,10 @@ static int smsc47m1_find(int *address) } superio_select(); - *address = (superio_inb(SUPERIO_REG_BASE) << 8) - | superio_inb(SUPERIO_REG_BASE + 1); + *addr = (superio_inb(SUPERIO_REG_BASE) << 8) + | superio_inb(SUPERIO_REG_BASE + 1); val = superio_inb(SUPERIO_REG_ACT); - if (*address == 0 || (val & 0x01) == 0) { + if (*addr == 0 || (val & 0x01) == 0) { printk(KERN_INFO "smsc47m1: Device is disabled, will not use\n"); superio_exit(); return -ENODEV; @@ -401,17 +384,13 @@ static int smsc47m1_find(int *address) return 0; } -static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind) +static int smsc47m1_detect(struct i2c_adapter *adapter) { struct i2c_client *new_client; struct smsc47m1_data *data; int err = 0; int fan1, fan2, pwm1, pwm2; - if (!i2c_is_isa_adapter(adapter)) { - return 0; - } - if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.name)) { dev_err(&adapter->dev, "Region 0x%x already in use!\n", address); return -EBUSY; @@ -461,6 +440,13 @@ static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind) function. */ smsc47m1_update_device(&new_client->dev, 1); + /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto error_detach; + } + if (fan1) { device_create_file(&new_client->dev, &dev_attr_fan1_input); device_create_file(&new_client->dev, &dev_attr_fan1_min); @@ -494,6 +480,8 @@ static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +error_detach: + i2c_detach_client(new_client); error_free: kfree(data); error_release: @@ -503,16 +491,16 @@ error_release: static int smsc47m1_detach_client(struct i2c_client *client) { + struct smsc47m1_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); + hwmon_device_unregister(data->class_dev); + + if ((err = i2c_detach_client(client))) return err; - } release_region(client->addr, SMSC_EXTENT); - kfree(i2c_get_clientdata(client)); + kfree(data); return 0; } @@ -573,16 +561,16 @@ static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, static int __init sm_smsc47m1_init(void) { - if (smsc47m1_find(normal_isa)) { + if (smsc47m1_find(&address)) { return -ENODEV; } - return i2c_add_driver(&smsc47m1_driver); + return i2c_isa_add_driver(&smsc47m1_driver); } static void __exit sm_smsc47m1_exit(void) { - i2c_del_driver(&smsc47m1_driver); + i2c_isa_del_driver(&smsc47m1_driver); } MODULE_AUTHOR("Mark D. Studebaker "); diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 164d47948390..eb84997627c8 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -35,7 +35,9 @@ #include #include #include -#include +#include +#include +#include #include #include @@ -47,14 +49,10 @@ module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the sensors"); -/* Addresses to scan. +/* Device address Note that we can't determine the ISA address until we have initialized our module */ -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(via686a); +static unsigned short address; /* The Via 686a southbridge has a LM78-like chip integrated on the same IC. @@ -297,6 +295,7 @@ static inline long TEMP_FROM_REG10(u16 val) via686a client is allocated. */ struct via686a_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -315,8 +314,7 @@ struct via686a_data { static struct pci_dev *s_bridge; /* pointer to the (only) via686a */ -static int via686a_attach_adapter(struct i2c_adapter *adapter); -static int via686a_detect(struct i2c_adapter *adapter, int address, int kind); +static int via686a_detect(struct i2c_adapter *adapter); static int via686a_detach_client(struct i2c_client *client); static inline int via686a_read_value(struct i2c_client *client, u8 reg) @@ -576,22 +574,13 @@ static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); static struct i2c_driver via686a_driver = { .owner = THIS_MODULE, .name = "via686a", - .id = I2C_DRIVERID_VIA686A, - .flags = I2C_DF_NOTIFY, - .attach_adapter = via686a_attach_adapter, + .attach_adapter = via686a_detect, .detach_client = via686a_detach_client, }; /* This is called when the module is loaded */ -static int via686a_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, via686a_detect); -} - -static int via686a_detect(struct i2c_adapter *adapter, int address, int kind) +static int via686a_detect(struct i2c_adapter *adapter) { struct i2c_client *new_client; struct via686a_data *data; @@ -599,13 +588,6 @@ static int via686a_detect(struct i2c_adapter *adapter, int address, int kind) const char client_name[] = "via686a"; u16 val; - /* Make sure we are probing the ISA bus!! */ - if (!i2c_is_isa_adapter(adapter)) { - dev_err(&adapter->dev, - "via686a_detect called for an I2C bus adapter?!?\n"); - return 0; - } - /* 8231 requires multiple of 256, we enforce that on 686 as well */ if (force_addr) address = force_addr & 0xFF00; @@ -637,7 +619,7 @@ static int via686a_detect(struct i2c_adapter *adapter, int address, int kind) if (!(data = kmalloc(sizeof(struct via686a_data), GFP_KERNEL))) { err = -ENOMEM; - goto ERROR0; + goto exit_release; } memset(data, 0, sizeof(struct via686a_data)); @@ -655,12 +637,18 @@ static int via686a_detect(struct i2c_adapter *adapter, int address, int kind) init_MUTEX(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) - goto ERROR3; + goto exit_free; /* Initialize the VIA686A chip */ via686a_init_client(new_client); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &dev_attr_in0_input); device_create_file(&new_client->dev, &dev_attr_in1_input); device_create_file(&new_client->dev, &dev_attr_in2_input); @@ -695,25 +683,27 @@ static int via686a_detect(struct i2c_adapter *adapter, int address, int kind) return 0; -ERROR3: +exit_detach: + i2c_detach_client(new_client); +exit_free: kfree(data); -ERROR0: +exit_release: release_region(address, VIA686A_EXTENT); return err; } static int via686a_detach_client(struct i2c_client *client) { + struct via686a_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); + hwmon_device_unregister(data->class_dev); + + if ((err = i2c_detach_client(client))) return err; - } release_region(client->addr, VIA686A_EXTENT); - kfree(i2c_get_clientdata(client)); + kfree(data); return 0; } @@ -810,29 +800,25 @@ static int __devinit via686a_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { u16 val; - int addr = 0; if (PCIBIOS_SUCCESSFUL != pci_read_config_word(dev, VIA686A_BASE_REG, &val)) return -ENODEV; - addr = val & ~(VIA686A_EXTENT - 1); - if (addr == 0 && force_addr == 0) { + address = val & ~(VIA686A_EXTENT - 1); + if (address == 0 && force_addr == 0) { dev_err(&dev->dev, "base address not set - upgrade BIOS " "or use force_addr=0xaddr\n"); return -ENODEV; } - if (force_addr) - addr = force_addr; /* so detect will get called */ - if (!addr) { + if (!address) { dev_err(&dev->dev, "No Via 686A sensors found.\n"); return -ENODEV; } - normal_isa[0] = addr; s_bridge = pci_dev_get(dev); - if (i2c_add_driver(&via686a_driver)) { + if (i2c_isa_add_driver(&via686a_driver)) { pci_dev_put(s_bridge); s_bridge = NULL; } @@ -859,7 +845,7 @@ static void __exit sm_via686a_exit(void) { pci_unregister_driver(&via686a_pci_driver); if (s_bridge != NULL) { - i2c_del_driver(&via686a_driver); + i2c_isa_del_driver(&via686a_driver); pci_dev_put(s_bridge); s_bridge = NULL; } diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 8a40b6976e1a..b60efe8f8b26 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -9,6 +9,9 @@ Thanks to Leon Moonen, Steve Cliffe and Grant Coady for their help in testing and debugging this driver. + This driver also supports the W83627EHG, which is the lead-free + version of the W83627EHF. + This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or @@ -37,17 +40,14 @@ #include #include #include -#include +#include +#include +#include #include #include "lm75.h" -/* Addresses to scan - The actual ISA address is read from Super-I/O configuration space */ -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(w83627ehf); +/* The actual ISA address is read from Super-I/O configuration space */ +static unsigned short address; /* * Super-I/O constants and functions @@ -174,6 +174,7 @@ temp1_to_reg(int temp) struct w83627ehf_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore lock; struct semaphore update_lock; @@ -666,15 +667,12 @@ static void w83627ehf_init_client(struct i2c_client *client) } } -static int w83627ehf_detect(struct i2c_adapter *adapter, int address, int kind) +static int w83627ehf_detect(struct i2c_adapter *adapter) { struct i2c_client *client; struct w83627ehf_data *data; int i, err = 0; - if (!i2c_is_isa_adapter(adapter)) - return 0; - if (!request_region(address, REGION_LENGTH, w83627ehf_driver.name)) { err = -EBUSY; goto exit; @@ -720,6 +718,12 @@ static int w83627ehf_detect(struct i2c_adapter *adapter, int address, int kind) data->has_fan |= (1 << 4); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&client->dev, &dev_attr_fan1_input); device_create_file(&client->dev, &dev_attr_fan1_min); device_create_file(&client->dev, &dev_attr_fan1_div); @@ -753,6 +757,8 @@ static int w83627ehf_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +exit_detach: + i2c_detach_client(client); exit_free: kfree(data); exit_release: @@ -761,24 +767,17 @@ exit: return err; } -static int w83627ehf_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, w83627ehf_detect); -} - static int w83627ehf_detach_client(struct i2c_client *client) { + struct w83627ehf_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); + hwmon_device_unregister(data->class_dev); + + if ((err = i2c_detach_client(client))) return err; - } release_region(client->addr, REGION_LENGTH); - kfree(i2c_get_clientdata(client)); + kfree(data); return 0; } @@ -786,12 +785,11 @@ static int w83627ehf_detach_client(struct i2c_client *client) static struct i2c_driver w83627ehf_driver = { .owner = THIS_MODULE, .name = "w83627ehf", - .flags = I2C_DF_NOTIFY, - .attach_adapter = w83627ehf_attach_adapter, + .attach_adapter = w83627ehf_detect, .detach_client = w83627ehf_detach_client, }; -static int __init w83627ehf_find(int sioaddr, int *address) +static int __init w83627ehf_find(int sioaddr, unsigned short *addr) { u16 val; @@ -809,8 +807,8 @@ static int __init w83627ehf_find(int sioaddr, int *address) superio_select(W83627EHF_LD_HWM); val = (superio_inb(SIO_REG_ADDR) << 8) | superio_inb(SIO_REG_ADDR + 1); - *address = val & ~(REGION_LENGTH - 1); - if (*address == 0) { + *addr = val & ~(REGION_LENGTH - 1); + if (*addr == 0) { superio_exit(); return -ENODEV; } @@ -826,16 +824,16 @@ static int __init w83627ehf_find(int sioaddr, int *address) static int __init sensors_w83627ehf_init(void) { - if (w83627ehf_find(0x2e, &normal_isa[0]) - && w83627ehf_find(0x4e, &normal_isa[0])) + if (w83627ehf_find(0x2e, &address) + && w83627ehf_find(0x4e, &address)) return -ENODEV; - return i2c_add_driver(&w83627ehf_driver); + return i2c_isa_add_driver(&w83627ehf_driver); } static void __exit sensors_w83627ehf_exit(void) { - i2c_del_driver(&w83627ehf_driver); + i2c_isa_del_driver(&w83627ehf_driver); } MODULE_AUTHOR("Jean Delvare "); diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index bd87a42e068a..02bd5c0239a2 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -42,8 +42,10 @@ #include #include #include -#include -#include +#include +#include +#include +#include #include #include "lm75.h" @@ -56,12 +58,11 @@ module_param(force_i2c, byte, 0); MODULE_PARM_DESC(force_i2c, "Initialize the i2c address of the sensors"); -/* Addresses to scan */ -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END }; +/* The actual ISA address is read from Super-I/O configuration space */ +static unsigned short address; /* Insmod parameters */ -SENSORS_INSMOD_4(w83627hf, w83627thf, w83697hf, w83637hf); +enum chips { any_chip, w83627hf, w83627thf, w83697hf, w83637hf }; static int init = 1; module_param(init, bool, 0); @@ -277,6 +278,7 @@ static inline u8 DIV_TO_REG(long val) dynamically allocated, at the same time when a new client is allocated. */ struct w83627hf_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore lock; enum chips type; @@ -314,9 +316,7 @@ struct w83627hf_data { }; -static int w83627hf_attach_adapter(struct i2c_adapter *adapter); -static int w83627hf_detect(struct i2c_adapter *adapter, int address, - int kind); +static int w83627hf_detect(struct i2c_adapter *adapter); static int w83627hf_detach_client(struct i2c_client *client); static int w83627hf_read_value(struct i2c_client *client, u16 register); @@ -328,9 +328,7 @@ static void w83627hf_init_client(struct i2c_client *client); static struct i2c_driver w83627hf_driver = { .owner = THIS_MODULE, .name = "w83627hf", - .id = I2C_DRIVERID_W83627HF, - .flags = I2C_DF_NOTIFY, - .attach_adapter = w83627hf_attach_adapter, + .attach_adapter = w83627hf_detect, .detach_client = w83627hf_detach_client, }; @@ -959,16 +957,7 @@ device_create_file(&client->dev, &dev_attr_temp##offset##_type); \ } while (0) -/* This function is called when: - * w83627hf_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and w83627hf_driver is still present) */ -static int w83627hf_attach_adapter(struct i2c_adapter *adapter) -{ - return i2c_detect(adapter, &addr_data, w83627hf_detect); -} - -static int w83627hf_find(int sioaddr, int *address) +static int __init w83627hf_find(int sioaddr, unsigned short *addr) { u16 val; @@ -988,32 +977,24 @@ static int w83627hf_find(int sioaddr, int *address) superio_select(W83627HF_LD_HWM); val = (superio_inb(WINB_BASE_REG) << 8) | superio_inb(WINB_BASE_REG + 1); - *address = val & ~(WINB_EXTENT - 1); - if (*address == 0 && force_addr == 0) { + *addr = val & ~(WINB_EXTENT - 1); + if (*addr == 0 && force_addr == 0) { superio_exit(); return -ENODEV; } - if (force_addr) - *address = force_addr; /* so detect will get called */ superio_exit(); return 0; } -int w83627hf_detect(struct i2c_adapter *adapter, int address, - int kind) +static int w83627hf_detect(struct i2c_adapter *adapter) { - int val; + int val, kind; struct i2c_client *new_client; struct w83627hf_data *data; int err = 0; const char *client_name = ""; - if (!i2c_is_isa_adapter(adapter)) { - err = -ENODEV; - goto ERROR0; - } - if(force_addr) address = force_addr & ~(WINB_EXTENT - 1); @@ -1102,6 +1083,12 @@ int w83627hf_detect(struct i2c_adapter *adapter, int address, data->fan_min[2] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(3)); /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto ERROR3; + } + device_create_file_in(new_client, 0); if (kind != w83697hf) device_create_file_in(new_client, 1); @@ -1152,6 +1139,8 @@ int w83627hf_detect(struct i2c_adapter *adapter, int address, return 0; + ERROR3: + i2c_detach_client(new_client); ERROR2: kfree(data); ERROR1: @@ -1162,16 +1151,16 @@ int w83627hf_detect(struct i2c_adapter *adapter, int address, static int w83627hf_detach_client(struct i2c_client *client) { + struct w83627hf_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); + hwmon_device_unregister(data->class_dev); + + if ((err = i2c_detach_client(client))) return err; - } release_region(client->addr, WINB_EXTENT); - kfree(i2c_get_clientdata(client)); + kfree(data); return 0; } @@ -1327,7 +1316,7 @@ static void w83627hf_init_client(struct i2c_client *client) data->vrm = (data->vrm_ovt & 0x01) ? 90 : 82; } else { /* Convert VID to voltage based on default VRM */ - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); } tmp = w83627hf_read_value(client, W83781D_REG_SCFG1); @@ -1485,20 +1474,17 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev) static int __init sensors_w83627hf_init(void) { - int addr; - - if (w83627hf_find(0x2e, &addr) - && w83627hf_find(0x4e, &addr)) { + if (w83627hf_find(0x2e, &address) + && w83627hf_find(0x4e, &address)) { return -ENODEV; } - normal_isa[0] = addr; - return i2c_add_driver(&w83627hf_driver); + return i2c_isa_add_driver(&w83627hf_driver); } static void __exit sensors_w83627hf_exit(void) { - i2c_del_driver(&w83627hf_driver); + i2c_isa_del_driver(&w83627hf_driver); } MODULE_AUTHOR("Frodo Looijaard , " diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 0bb131ce09eb..4c43337ca780 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -38,8 +38,10 @@ #include #include #include -#include -#include +#include +#include +#include +#include #include #include "lm75.h" @@ -47,10 +49,10 @@ static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END }; +static unsigned short isa_address = 0x290; /* Insmod parameters */ -SENSORS_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f); +I2C_CLIENT_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f); I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); @@ -218,6 +220,7 @@ DIV_TO_REG(long val, enum chips type) allocated. */ struct w83781d_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore lock; enum chips type; @@ -255,6 +258,7 @@ struct w83781d_data { }; static int w83781d_attach_adapter(struct i2c_adapter *adapter); +static int w83781d_isa_attach_adapter(struct i2c_adapter *adapter); static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind); static int w83781d_detach_client(struct i2c_client *client); @@ -273,6 +277,14 @@ static struct i2c_driver w83781d_driver = { .detach_client = w83781d_detach_client, }; +static struct i2c_driver w83781d_isa_driver = { + .owner = THIS_MODULE, + .name = "w83781d-isa", + .attach_adapter = w83781d_isa_attach_adapter, + .detach_client = w83781d_detach_client, +}; + + /* following are the sysfs callback functions */ #define show_in_reg(reg) \ static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ @@ -856,7 +868,13 @@ w83781d_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, w83781d_detect); + return i2c_probe(adapter, &addr_data, w83781d_detect); +} + +static int +w83781d_isa_attach_adapter(struct i2c_adapter *adapter) +{ + return w83781d_detect(adapter, isa_address, -1); } /* Assumes that adapter is of I2C, not ISA variety. @@ -961,10 +979,10 @@ w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, ERROR_SC_3: i2c_detach_client(data->lm75[0]); ERROR_SC_2: - if (NULL != data->lm75[1]) + if (data->lm75[1]) kfree(data->lm75[1]); ERROR_SC_1: - if (NULL != data->lm75[0]) + if (data->lm75[0]) kfree(data->lm75[0]); ERROR_SC_0: return err; @@ -999,7 +1017,7 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) if (is_isa) if (!request_region(address, W83781D_EXTENT, - w83781d_driver.name)) { + w83781d_isa_driver.name)) { dev_dbg(&adapter->dev, "Request of region " "0x%x-0x%x for w83781d failed\n", address, address + W83781D_EXTENT - 1); @@ -1057,7 +1075,7 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) new_client->addr = address; init_MUTEX(&data->lock); new_client->adapter = adapter; - new_client->driver = &w83781d_driver; + new_client->driver = is_isa ? &w83781d_isa_driver : &w83781d_driver; new_client->flags = 0; /* Now, we do the remaining detection. */ @@ -1189,6 +1207,12 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) data->pwmenable[i] = 1; /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto ERROR4; + } + device_create_file_in(new_client, 0); if (kind != w83783s) device_create_file_in(new_client, 1); @@ -1241,6 +1265,15 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) return 0; +ERROR4: + if (data->lm75[1]) { + i2c_detach_client(data->lm75[1]); + kfree(data->lm75[1]); + } + if (data->lm75[0]) { + i2c_detach_client(data->lm75[0]); + kfree(data->lm75[0]); + } ERROR3: i2c_detach_client(new_client); ERROR2: @@ -1255,24 +1288,26 @@ ERROR0: static int w83781d_detach_client(struct i2c_client *client) { + struct w83781d_data *data = i2c_get_clientdata(client); int err; + /* main client */ + if (data) + hwmon_device_unregister(data->class_dev); + if (i2c_is_isa_client(client)) release_region(client->addr, W83781D_EXTENT); - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); + if ((err = i2c_detach_client(client))) return err; - } - if (i2c_get_clientdata(client)==NULL) { - /* subclients */ + /* main client */ + if (data) + kfree(data); + + /* subclient */ + else kfree(client); - } else { - /* main client */ - kfree(i2c_get_clientdata(client)); - } return 0; } @@ -1443,7 +1478,7 @@ w83781d_init_client(struct i2c_client *client) w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0); } - data->vrm = i2c_which_vrm(); + data->vrm = vid_which_vrm(); if ((type != w83781d) && (type != as99127f)) { tmp = w83781d_read_value(client, W83781D_REG_SCFG1); @@ -1613,12 +1648,25 @@ static struct w83781d_data *w83781d_update_device(struct device *dev) static int __init sensors_w83781d_init(void) { - return i2c_add_driver(&w83781d_driver); + int res; + + res = i2c_add_driver(&w83781d_driver); + if (res) + return res; + + res = i2c_isa_add_driver(&w83781d_isa_driver); + if (res) { + i2c_del_driver(&w83781d_driver); + return res; + } + + return 0; } static void __exit sensors_w83781d_exit(void) { + i2c_isa_del_driver(&w83781d_isa_driver); i2c_del_driver(&w83781d_driver); } diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c new file mode 100644 index 000000000000..ba0c28015f6a --- /dev/null +++ b/drivers/hwmon/w83792d.c @@ -0,0 +1,1649 @@ +/* + w83792d.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (C) 2004, 2005 Winbond Electronics Corp. + Chunhao Huang , + Rudolf Marek + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Note: + 1. This driver is only for 2.6 kernel, 2.4 kernel need a different driver. + 2. This driver is only for Winbond W83792D C version device, there + are also some motherboards with B version W83792D device. The + calculation method to in6-in7(measured value, limits) is a little + different between C and B version. C or B version can be identified + by CR[0x49h]. +*/ + +/* + Supports following chips: + + Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA + w83792d 9 7 7 3 0x7a 0x5ca3 yes no +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(w83792d); +I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " + "{bus, clientaddr, subclientaddr1, subclientaddr2}"); + +static int init; +module_param(init, bool, 0); +MODULE_PARM_DESC(init, "Set to one to force chip initialization"); + +/* The W83792D registers */ +static const u8 W83792D_REG_IN[9] = { + 0x20, /* Vcore A in DataSheet */ + 0x21, /* Vcore B in DataSheet */ + 0x22, /* VIN0 in DataSheet */ + 0x23, /* VIN1 in DataSheet */ + 0x24, /* VIN2 in DataSheet */ + 0x25, /* VIN3 in DataSheet */ + 0x26, /* 5VCC in DataSheet */ + 0xB0, /* 5VSB in DataSheet */ + 0xB1 /* VBAT in DataSheet */ +}; +#define W83792D_REG_LOW_BITS1 0x3E /* Low Bits I in DataSheet */ +#define W83792D_REG_LOW_BITS2 0x3F /* Low Bits II in DataSheet */ +static const u8 W83792D_REG_IN_MAX[9] = { + 0x2B, /* Vcore A High Limit in DataSheet */ + 0x2D, /* Vcore B High Limit in DataSheet */ + 0x2F, /* VIN0 High Limit in DataSheet */ + 0x31, /* VIN1 High Limit in DataSheet */ + 0x33, /* VIN2 High Limit in DataSheet */ + 0x35, /* VIN3 High Limit in DataSheet */ + 0x37, /* 5VCC High Limit in DataSheet */ + 0xB4, /* 5VSB High Limit in DataSheet */ + 0xB6 /* VBAT High Limit in DataSheet */ +}; +static const u8 W83792D_REG_IN_MIN[9] = { + 0x2C, /* Vcore A Low Limit in DataSheet */ + 0x2E, /* Vcore B Low Limit in DataSheet */ + 0x30, /* VIN0 Low Limit in DataSheet */ + 0x32, /* VIN1 Low Limit in DataSheet */ + 0x34, /* VIN2 Low Limit in DataSheet */ + 0x36, /* VIN3 Low Limit in DataSheet */ + 0x38, /* 5VCC Low Limit in DataSheet */ + 0xB5, /* 5VSB Low Limit in DataSheet */ + 0xB7 /* VBAT Low Limit in DataSheet */ +}; +static const u8 W83792D_REG_FAN[7] = { + 0x28, /* FAN 1 Count in DataSheet */ + 0x29, /* FAN 2 Count in DataSheet */ + 0x2A, /* FAN 3 Count in DataSheet */ + 0xB8, /* FAN 4 Count in DataSheet */ + 0xB9, /* FAN 5 Count in DataSheet */ + 0xBA, /* FAN 6 Count in DataSheet */ + 0xBE /* FAN 7 Count in DataSheet */ +}; +static const u8 W83792D_REG_FAN_MIN[7] = { + 0x3B, /* FAN 1 Count Low Limit in DataSheet */ + 0x3C, /* FAN 2 Count Low Limit in DataSheet */ + 0x3D, /* FAN 3 Count Low Limit in DataSheet */ + 0xBB, /* FAN 4 Count Low Limit in DataSheet */ + 0xBC, /* FAN 5 Count Low Limit in DataSheet */ + 0xBD, /* FAN 6 Count Low Limit in DataSheet */ + 0xBF /* FAN 7 Count Low Limit in DataSheet */ +}; +#define W83792D_REG_FAN_CFG 0x84 /* FAN Configuration in DataSheet */ +static const u8 W83792D_REG_FAN_DIV[4] = { + 0x47, /* contains FAN2 and FAN1 Divisor */ + 0x5B, /* contains FAN4 and FAN3 Divisor */ + 0x5C, /* contains FAN6 and FAN5 Divisor */ + 0x9E /* contains FAN7 Divisor. */ +}; +static const u8 W83792D_REG_PWM[7] = { + 0x81, /* FAN 1 Duty Cycle, be used to control */ + 0x83, /* FAN 2 Duty Cycle, be used to control */ + 0x94, /* FAN 3 Duty Cycle, be used to control */ + 0xA3, /* FAN 4 Duty Cycle, be used to control */ + 0xA4, /* FAN 5 Duty Cycle, be used to control */ + 0xA5, /* FAN 6 Duty Cycle, be used to control */ + 0xA6 /* FAN 7 Duty Cycle, be used to control */ +}; +#define W83792D_REG_BANK 0x4E +#define W83792D_REG_TEMP2_CONFIG 0xC2 +#define W83792D_REG_TEMP3_CONFIG 0xCA + +static const u8 W83792D_REG_TEMP1[3] = { + 0x27, /* TEMP 1 in DataSheet */ + 0x39, /* TEMP 1 Over in DataSheet */ + 0x3A, /* TEMP 1 Hyst in DataSheet */ +}; + +static const u8 W83792D_REG_TEMP_ADD[2][6] = { + { 0xC0, /* TEMP 2 in DataSheet */ + 0xC1, /* TEMP 2(0.5 deg) in DataSheet */ + 0xC5, /* TEMP 2 Over High part in DataSheet */ + 0xC6, /* TEMP 2 Over Low part in DataSheet */ + 0xC3, /* TEMP 2 Thyst High part in DataSheet */ + 0xC4 }, /* TEMP 2 Thyst Low part in DataSheet */ + { 0xC8, /* TEMP 3 in DataSheet */ + 0xC9, /* TEMP 3(0.5 deg) in DataSheet */ + 0xCD, /* TEMP 3 Over High part in DataSheet */ + 0xCE, /* TEMP 3 Over Low part in DataSheet */ + 0xCB, /* TEMP 3 Thyst High part in DataSheet */ + 0xCC } /* TEMP 3 Thyst Low part in DataSheet */ +}; + +static const u8 W83792D_REG_THERMAL[3] = { + 0x85, /* SmartFanI: Fan1 target value */ + 0x86, /* SmartFanI: Fan2 target value */ + 0x96 /* SmartFanI: Fan3 target value */ +}; + +static const u8 W83792D_REG_TOLERANCE[3] = { + 0x87, /* (bit3-0)SmartFan Fan1 tolerance */ + 0x87, /* (bit7-4)SmartFan Fan2 tolerance */ + 0x97 /* (bit3-0)SmartFan Fan3 tolerance */ +}; + +static const u8 W83792D_REG_POINTS[3][4] = { + { 0x85, /* SmartFanII: Fan1 temp point 1 */ + 0xE3, /* SmartFanII: Fan1 temp point 2 */ + 0xE4, /* SmartFanII: Fan1 temp point 3 */ + 0xE5 }, /* SmartFanII: Fan1 temp point 4 */ + { 0x86, /* SmartFanII: Fan2 temp point 1 */ + 0xE6, /* SmartFanII: Fan2 temp point 2 */ + 0xE7, /* SmartFanII: Fan2 temp point 3 */ + 0xE8 }, /* SmartFanII: Fan2 temp point 4 */ + { 0x96, /* SmartFanII: Fan3 temp point 1 */ + 0xE9, /* SmartFanII: Fan3 temp point 2 */ + 0xEA, /* SmartFanII: Fan3 temp point 3 */ + 0xEB } /* SmartFanII: Fan3 temp point 4 */ +}; + +static const u8 W83792D_REG_LEVELS[3][4] = { + { 0x88, /* (bit3-0) SmartFanII: Fan1 Non-Stop */ + 0x88, /* (bit7-4) SmartFanII: Fan1 Level 1 */ + 0xE0, /* (bit7-4) SmartFanII: Fan1 Level 2 */ + 0xE0 }, /* (bit3-0) SmartFanII: Fan1 Level 3 */ + { 0x89, /* (bit3-0) SmartFanII: Fan2 Non-Stop */ + 0x89, /* (bit7-4) SmartFanII: Fan2 Level 1 */ + 0xE1, /* (bit7-4) SmartFanII: Fan2 Level 2 */ + 0xE1 }, /* (bit3-0) SmartFanII: Fan2 Level 3 */ + { 0x98, /* (bit3-0) SmartFanII: Fan3 Non-Stop */ + 0x98, /* (bit7-4) SmartFanII: Fan3 Level 1 */ + 0xE2, /* (bit7-4) SmartFanII: Fan3 Level 2 */ + 0xE2 } /* (bit3-0) SmartFanII: Fan3 Level 3 */ +}; + +#define W83792D_REG_CONFIG 0x40 +#define W83792D_REG_VID_FANDIV 0x47 +#define W83792D_REG_CHIPID 0x49 +#define W83792D_REG_WCHIPID 0x58 +#define W83792D_REG_CHIPMAN 0x4F +#define W83792D_REG_PIN 0x4B +#define W83792D_REG_I2C_SUBADDR 0x4A + +#define W83792D_REG_ALARM1 0xA9 /* realtime status register1 */ +#define W83792D_REG_ALARM2 0xAA /* realtime status register2 */ +#define W83792D_REG_ALARM3 0xAB /* realtime status register3 */ +#define W83792D_REG_CHASSIS 0x42 /* Bit 5: Case Open status bit */ +#define W83792D_REG_CHASSIS_CLR 0x44 /* Bit 7: Case Open CLR_CHS/Reset bit */ + +/* control in0/in1 's limit modifiability */ +#define W83792D_REG_VID_IN_B 0x17 + +#define W83792D_REG_VBAT 0x5D +#define W83792D_REG_I2C_ADDR 0x48 + +/* Conversions. Rounding and limit checking is only done on the TO_REG + variants. Note that you should be a bit careful with which arguments + these macros are called: arguments may be evaluated more than once. + Fixing this is just not worth it. */ +#define IN_FROM_REG(nr,val) (((nr)<=1)?(val*2): \ + ((((nr)==6)||((nr)==7))?(val*6):(val*4))) +#define IN_TO_REG(nr,val) (((nr)<=1)?(val/2): \ + ((((nr)==6)||((nr)==7))?(val/6):(val/4))) + +static inline u8 +FAN_TO_REG(long rpm, int div) +{ + if (rpm == 0) + return 255; + rpm = SENSORS_LIMIT(rpm, 1, 1000000); + return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); +} + +#define FAN_FROM_REG(val,div) ((val) == 0 ? -1 : \ + ((val) == 255 ? 0 : \ + 1350000 / ((val) * (div)))) + +/* for temp1 */ +#define TEMP1_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \ + : (val)) / 1000, 0, 0xff)) +#define TEMP1_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000) +/* for temp2 and temp3, because they need addtional resolution */ +#define TEMP_ADD_FROM_REG(val1, val2) \ + ((((val1) & 0x80 ? (val1)-0x100 \ + : (val1)) * 1000) + ((val2 & 0x80) ? 500 : 0)) +#define TEMP_ADD_TO_REG_HIGH(val) \ + (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \ + : (val)) / 1000, 0, 0xff)) +#define TEMP_ADD_TO_REG_LOW(val) ((val%1000) ? 0x80 : 0x00) + +#define PWM_FROM_REG(val) (val) +#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255)) +#define DIV_FROM_REG(val) (1 << (val)) + +static inline u8 +DIV_TO_REG(long val) +{ + int i; + val = SENSORS_LIMIT(val, 1, 128) >> 1; + for (i = 0; i < 6; i++) { + if (val == 0) + break; + val >>= 1; + } + return ((u8) i); +} + +struct w83792d_data { + struct i2c_client client; + struct class_device *class_dev; + struct semaphore lock; + enum chips type; + + struct semaphore update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + /* array of 2 pointers to subclients */ + struct i2c_client *lm75[2]; + + u8 in[9]; /* Register value */ + u8 in_max[9]; /* Register value */ + u8 in_min[9]; /* Register value */ + u8 low_bits[2]; /* Additional resolution to voltage in0-6 */ + u8 fan[7]; /* Register value */ + u8 fan_min[7]; /* Register value */ + u8 temp1[3]; /* current, over, thyst */ + u8 temp_add[2][6]; /* Register value */ + u8 fan_div[7]; /* Register encoding, shifted right */ + u8 pwm[7]; /* We only consider the first 3 set of pwm, + although 792 chip has 7 set of pwm. */ + u8 pwmenable[3]; + u8 pwm_mode[7]; /* indicates PWM or DC mode: 1->PWM; 0->DC */ + u32 alarms; /* realtime status register encoding,combined */ + u8 chassis; /* Chassis status */ + u8 chassis_clear; /* CLR_CHS, clear chassis intrusion detection */ + u8 thermal_cruise[3]; /* Smart FanI: Fan1,2,3 target value */ + u8 tolerance[3]; /* Fan1,2,3 tolerance(Smart Fan I/II) */ + u8 sf2_points[3][4]; /* Smart FanII: Fan1,2,3 temperature points */ + u8 sf2_levels[3][4]; /* Smart FanII: Fan1,2,3 duty cycle levels */ +}; + +static int w83792d_attach_adapter(struct i2c_adapter *adapter); +static int w83792d_detect(struct i2c_adapter *adapter, int address, int kind); +static int w83792d_detach_client(struct i2c_client *client); + +static int w83792d_read_value(struct i2c_client *client, u8 register); +static int w83792d_write_value(struct i2c_client *client, u8 register, + u8 value); +static struct w83792d_data *w83792d_update_device(struct device *dev); + +#ifdef DEBUG +static void w83792d_print_debug(struct w83792d_data *data, struct device *dev); +#endif + +static void w83792d_init_client(struct i2c_client *client); + +static struct i2c_driver w83792d_driver = { + .owner = THIS_MODULE, + .name = "w83792d", + .flags = I2C_DF_NOTIFY, + .attach_adapter = w83792d_attach_adapter, + .detach_client = w83792d_detach_client, +}; + +static long in_count_from_reg(int nr, struct w83792d_data *data) +{ + u16 vol_count = data->in[nr]; + u16 low_bits = 0; + vol_count = (vol_count << 2); + switch (nr) + { + case 0: /* vin0 */ + low_bits = (data->low_bits[0]) & 0x03; + break; + case 1: /* vin1 */ + low_bits = ((data->low_bits[0]) & 0x0c) >> 2; + break; + case 2: /* vin2 */ + low_bits = ((data->low_bits[0]) & 0x30) >> 4; + break; + case 3: /* vin3 */ + low_bits = ((data->low_bits[0]) & 0xc0) >> 6; + break; + case 4: /* vin4 */ + low_bits = (data->low_bits[1]) & 0x03; + break; + case 5: /* vin5 */ + low_bits = ((data->low_bits[1]) & 0x0c) >> 2; + break; + case 6: /* vin6 */ + low_bits = ((data->low_bits[1]) & 0x30) >> 4; + default: + break; + } + vol_count = vol_count | low_bits; + return vol_count; +} + +/* following are the sysfs callback functions */ +static ssize_t show_in(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct w83792d_data *data = w83792d_update_device(dev); + return sprintf(buf,"%ld\n", IN_FROM_REG(nr,(in_count_from_reg(nr, data)))); +} + +#define show_in_reg(reg) \ +static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + struct w83792d_data *data = w83792d_update_device(dev); \ + return sprintf(buf,"%ld\n", (long)(IN_FROM_REG(nr, (data->reg[nr])*4))); \ +} + +show_in_reg(in_min); +show_in_reg(in_max); + +#define store_in_reg(REG, reg) \ +static ssize_t store_in_##reg (struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + struct i2c_client *client = to_i2c_client(dev); \ + struct w83792d_data *data = i2c_get_clientdata(client); \ + u32 val; \ + \ + val = simple_strtoul(buf, NULL, 10); \ + data->in_##reg[nr] = SENSORS_LIMIT(IN_TO_REG(nr, val)/4, 0, 255); \ + w83792d_write_value(client, W83792D_REG_IN_##REG[nr], data->in_##reg[nr]); \ + \ + return count; \ +} +store_in_reg(MIN, min); +store_in_reg(MAX, max); + +#define sysfs_in_reg(offset) \ +static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in, \ + NULL, offset); \ +static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ + show_in_min, store_in_min, offset); \ +static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ + show_in_max, store_in_max, offset); + +sysfs_in_reg(0); +sysfs_in_reg(1); +sysfs_in_reg(2); +sysfs_in_reg(3); +sysfs_in_reg(4); +sysfs_in_reg(5); +sysfs_in_reg(6); +sysfs_in_reg(7); +sysfs_in_reg(8); + +#define device_create_file_in(client, offset) \ +do { \ +device_create_file(&client->dev, &sensor_dev_attr_in##offset##_input.dev_attr); \ +device_create_file(&client->dev, &sensor_dev_attr_in##offset##_max.dev_attr); \ +device_create_file(&client->dev, &sensor_dev_attr_in##offset##_min.dev_attr); \ +} while (0) + +#define show_fan_reg(reg) \ +static ssize_t show_##reg (struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index - 1; \ + struct w83792d_data *data = w83792d_update_device(dev); \ + return sprintf(buf,"%d\n", \ + FAN_FROM_REG(data->reg[nr], DIV_FROM_REG(data->fan_div[nr]))); \ +} + +show_fan_reg(fan); +show_fan_reg(fan_min); + +static ssize_t +store_fan_min(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index - 1; + struct i2c_client *client = to_i2c_client(dev); + struct w83792d_data *data = i2c_get_clientdata(client); + u32 val; + + val = simple_strtoul(buf, NULL, 10); + data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); + w83792d_write_value(client, W83792D_REG_FAN_MIN[nr], + data->fan_min[nr]); + + return count; +} + +static ssize_t +show_fan_div(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct w83792d_data *data = w83792d_update_device(dev); + return sprintf(buf, "%u\n", DIV_FROM_REG(data->fan_div[nr - 1])); +} + +/* Note: we save and restore the fan minimum here, because its value is + determined in part by the fan divisor. This follows the principle of + least suprise; the user doesn't expect the fan minimum to change just + because the divisor changed. */ +static ssize_t +store_fan_div(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index - 1; + struct i2c_client *client = to_i2c_client(dev); + struct w83792d_data *data = i2c_get_clientdata(client); + unsigned long min; + /*u8 reg;*/ + u8 fan_div_reg = 0; + u8 tmp_fan_div; + + /* Save fan_min */ + min = FAN_FROM_REG(data->fan_min[nr], + DIV_FROM_REG(data->fan_div[nr])); + + data->fan_div[nr] = DIV_TO_REG(simple_strtoul(buf, NULL, 10)); + + fan_div_reg = w83792d_read_value(client, W83792D_REG_FAN_DIV[nr >> 1]); + fan_div_reg &= (nr & 0x01) ? 0x8f : 0xf8; + tmp_fan_div = (nr & 0x01) ? (((data->fan_div[nr]) << 4) & 0x70) + : ((data->fan_div[nr]) & 0x07); + w83792d_write_value(client, W83792D_REG_FAN_DIV[nr >> 1], + fan_div_reg | tmp_fan_div); + + /* Restore fan_min */ + data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); + w83792d_write_value(client, W83792D_REG_FAN_MIN[nr], data->fan_min[nr]); + + return count; +} + +#define sysfs_fan(offset) \ +static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan, NULL, \ + offset); \ +static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ + show_fan_div, store_fan_div, offset); \ +static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan_min, store_fan_min, offset); + +sysfs_fan(1); +sysfs_fan(2); +sysfs_fan(3); +sysfs_fan(4); +sysfs_fan(5); +sysfs_fan(6); +sysfs_fan(7); + +#define device_create_file_fan(client, offset) \ +do { \ +device_create_file(&client->dev, &sensor_dev_attr_fan##offset##_input.dev_attr); \ +device_create_file(&client->dev, &sensor_dev_attr_fan##offset##_div.dev_attr); \ +device_create_file(&client->dev, &sensor_dev_attr_fan##offset##_min.dev_attr); \ +} while (0) + + +/* read/write the temperature1, includes measured value and limits */ + +static ssize_t show_temp1(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct w83792d_data *data = w83792d_update_device(dev); + return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp1[nr])); +} + +static ssize_t store_temp1(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); + struct w83792d_data *data = i2c_get_clientdata(client); + s32 val; + + val = simple_strtol(buf, NULL, 10); + + data->temp1[nr] = TEMP1_TO_REG(val); + w83792d_write_value(client, W83792D_REG_TEMP1[nr], + data->temp1[nr]); + + return count; +} + + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp1, + store_temp1, 1); +static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp1, + store_temp1, 2); + +#define device_create_file_temp1(client) \ +do { \ +device_create_file(&client->dev, &sensor_dev_attr_temp1_input.dev_attr); \ +device_create_file(&client->dev, &sensor_dev_attr_temp1_max.dev_attr); \ +device_create_file(&client->dev, &sensor_dev_attr_temp1_max_hyst.dev_attr); \ +} while (0) + + +/* read/write the temperature2-3, includes measured value and limits */ + +static ssize_t show_temp23(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + struct w83792d_data *data = w83792d_update_device(dev); + return sprintf(buf,"%ld\n", + (long)TEMP_ADD_FROM_REG(data->temp_add[nr][index], + data->temp_add[nr][index+1])); +} + +static ssize_t store_temp23(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); + struct w83792d_data *data = i2c_get_clientdata(client); + s32 val; + + val = simple_strtol(buf, NULL, 10); + + data->temp_add[nr][index] = TEMP_ADD_TO_REG_HIGH(val); + data->temp_add[nr][index+1] = TEMP_ADD_TO_REG_LOW(val); + w83792d_write_value(client, W83792D_REG_TEMP_ADD[nr][index], + data->temp_add[nr][index]); + w83792d_write_value(client, W83792D_REG_TEMP_ADD[nr][index+1], + data->temp_add[nr][index+1]); + + return count; +} + +#define sysfs_temp23(name,idx) \ +static SENSOR_DEVICE_ATTR_2(name##_input, S_IRUGO, show_temp23, NULL, \ + idx, 0); \ +static SENSOR_DEVICE_ATTR_2(name##_max, S_IRUGO | S_IWUSR, \ + show_temp23, store_temp23, idx, 2); \ +static SENSOR_DEVICE_ATTR_2(name##_max_hyst, S_IRUGO | S_IWUSR, \ + show_temp23, store_temp23, idx, 4); + +sysfs_temp23(temp2,0) +sysfs_temp23(temp3,1) + +#define device_create_file_temp_add(client, offset) \ +do { \ +device_create_file(&client->dev, &sensor_dev_attr_temp##offset##_input.dev_attr); \ +device_create_file(&client->dev, &sensor_dev_attr_temp##offset##_max.dev_attr); \ +device_create_file(&client->dev, \ +&sensor_dev_attr_temp##offset##_max_hyst.dev_attr); \ +} while (0) + + +/* get reatime status of all sensors items: voltage, temp, fan */ +static ssize_t +show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83792d_data *data = w83792d_update_device(dev); + return sprintf(buf, "%d\n", data->alarms); +} + +static +DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); +#define device_create_file_alarms(client) \ +device_create_file(&client->dev, &dev_attr_alarms); + + + +static ssize_t +show_pwm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct w83792d_data *data = w83792d_update_device(dev); + return sprintf(buf, "%ld\n", (long) PWM_FROM_REG(data->pwm[nr-1])); +} + +static ssize_t +show_pwmenable(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index - 1; + struct w83792d_data *data = w83792d_update_device(dev); + long pwm_enable_tmp = 1; + + switch (data->pwmenable[nr]) { + case 0: + pwm_enable_tmp = 1; /* manual mode */ + break; + case 1: + pwm_enable_tmp = 3; /*thermal cruise/Smart Fan I */ + break; + case 2: + pwm_enable_tmp = 2; /* Smart Fan II */ + break; + } + + return sprintf(buf, "%ld\n", pwm_enable_tmp); +} + +static ssize_t +store_pwm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index - 1; + struct i2c_client *client = to_i2c_client(dev); + struct w83792d_data *data = i2c_get_clientdata(client); + u32 val; + + val = simple_strtoul(buf, NULL, 10); + data->pwm[nr] = PWM_TO_REG(val); + w83792d_write_value(client, W83792D_REG_PWM[nr], data->pwm[nr]); + + return count; +} + +static ssize_t +store_pwmenable(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index - 1; + struct i2c_client *client = to_i2c_client(dev); + struct w83792d_data *data = i2c_get_clientdata(client); + u32 val; + u8 fan_cfg_tmp, cfg1_tmp, cfg2_tmp, cfg3_tmp, cfg4_tmp; + + val = simple_strtoul(buf, NULL, 10); + switch (val) { + case 1: + data->pwmenable[nr] = 0; /* manual mode */ + break; + case 2: + data->pwmenable[nr] = 2; /* Smart Fan II */ + break; + case 3: + data->pwmenable[nr] = 1; /* thermal cruise/Smart Fan I */ + break; + default: + return -EINVAL; + } + cfg1_tmp = data->pwmenable[0]; + cfg2_tmp = (data->pwmenable[1]) << 2; + cfg3_tmp = (data->pwmenable[2]) << 4; + cfg4_tmp = w83792d_read_value(client,W83792D_REG_FAN_CFG) & 0xc0; + fan_cfg_tmp = ((cfg4_tmp | cfg3_tmp) | cfg2_tmp) | cfg1_tmp; + w83792d_write_value(client, W83792D_REG_FAN_CFG, fan_cfg_tmp); + + return count; +} + +#define sysfs_pwm(offset) \ +static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ + show_pwm, store_pwm, offset); \ +static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ + show_pwmenable, store_pwmenable, offset); \ + +sysfs_pwm(1); +sysfs_pwm(2); +sysfs_pwm(3); + + +#define device_create_file_pwm(client, offset) \ +do { \ +device_create_file(&client->dev, &sensor_dev_attr_pwm##offset.dev_attr); \ +} while (0) + +#define device_create_file_pwmenable(client, offset) \ +do { \ +device_create_file(&client->dev, &sensor_dev_attr_pwm##offset##_enable.dev_attr); \ +} while (0) + + +static ssize_t +show_pwm_mode(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct w83792d_data *data = w83792d_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_mode[nr-1]); +} + +static ssize_t +store_pwm_mode(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index - 1; + struct i2c_client *client = to_i2c_client(dev); + struct w83792d_data *data = i2c_get_clientdata(client); + u32 val; + u8 pwm_mode_mask = 0; + + val = simple_strtoul(buf, NULL, 10); + data->pwm_mode[nr] = SENSORS_LIMIT(val, 0, 1); + pwm_mode_mask = w83792d_read_value(client, + W83792D_REG_PWM[nr]) & 0x7f; + w83792d_write_value(client, W83792D_REG_PWM[nr], + ((data->pwm_mode[nr]) << 7) | pwm_mode_mask); + + return count; +} + +#define sysfs_pwm_mode(offset) \ +static SENSOR_DEVICE_ATTR(pwm##offset##_mode, S_IRUGO | S_IWUSR, \ + show_pwm_mode, store_pwm_mode, offset); + +sysfs_pwm_mode(1); +sysfs_pwm_mode(2); +sysfs_pwm_mode(3); + +#define device_create_file_pwm_mode(client, offset) \ +do { \ +device_create_file(&client->dev, &sensor_dev_attr_pwm##offset##_mode.dev_attr); \ +} while (0) + + +static ssize_t +show_regs_chassis(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct w83792d_data *data = w83792d_update_device(dev); + return sprintf(buf, "%d\n", data->chassis); +} + +static DEVICE_ATTR(chassis, S_IRUGO, show_regs_chassis, NULL); + +#define device_create_file_chassis(client) \ +do { \ +device_create_file(&client->dev, &dev_attr_chassis); \ +} while (0) + + +static ssize_t +show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct w83792d_data *data = w83792d_update_device(dev); + return sprintf(buf, "%d\n", data->chassis_clear); +} + +static ssize_t +store_chassis_clear(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83792d_data *data = i2c_get_clientdata(client); + u32 val; + u8 temp1 = 0, temp2 = 0; + + val = simple_strtoul(buf, NULL, 10); + + data->chassis_clear = SENSORS_LIMIT(val, 0 ,1); + temp1 = ((data->chassis_clear) << 7) & 0x80; + temp2 = w83792d_read_value(client, + W83792D_REG_CHASSIS_CLR) & 0x7f; + w83792d_write_value(client, W83792D_REG_CHASSIS_CLR, temp1 | temp2); + + return count; +} + +static DEVICE_ATTR(chassis_clear, S_IRUGO | S_IWUSR, + show_chassis_clear, store_chassis_clear); + +#define device_create_file_chassis_clear(client) \ +do { \ +device_create_file(&client->dev, &dev_attr_chassis_clear); \ +} while (0) + + + +/* For Smart Fan I / Thermal Cruise */ +static ssize_t +show_thermal_cruise(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct w83792d_data *data = w83792d_update_device(dev); + return sprintf(buf, "%ld\n", (long)data->thermal_cruise[nr-1]); +} + +static ssize_t +store_thermal_cruise(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index - 1; + struct i2c_client *client = to_i2c_client(dev); + struct w83792d_data *data = i2c_get_clientdata(client); + u32 val; + u8 target_tmp=0, target_mask=0; + + val = simple_strtoul(buf, NULL, 10); + target_tmp = val; + target_tmp = target_tmp & 0x7f; + target_mask = w83792d_read_value(client, W83792D_REG_THERMAL[nr]) & 0x80; + data->thermal_cruise[nr] = SENSORS_LIMIT(target_tmp, 0, 255); + w83792d_write_value(client, W83792D_REG_THERMAL[nr], + (data->thermal_cruise[nr]) | target_mask); + + return count; +} + +#define sysfs_thermal_cruise(offset) \ +static SENSOR_DEVICE_ATTR(thermal_cruise##offset, S_IRUGO | S_IWUSR, \ + show_thermal_cruise, store_thermal_cruise, offset); + +sysfs_thermal_cruise(1); +sysfs_thermal_cruise(2); +sysfs_thermal_cruise(3); + +#define device_create_file_thermal_cruise(client, offset) \ +do { \ +device_create_file(&client->dev, \ +&sensor_dev_attr_thermal_cruise##offset.dev_attr); \ +} while (0) + + +/* For Smart Fan I/Thermal Cruise and Smart Fan II */ +static ssize_t +show_tolerance(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct w83792d_data *data = w83792d_update_device(dev); + return sprintf(buf, "%ld\n", (long)data->tolerance[nr-1]); +} + +static ssize_t +store_tolerance(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index - 1; + struct i2c_client *client = to_i2c_client(dev); + struct w83792d_data *data = i2c_get_clientdata(client); + u32 val; + u8 tol_tmp, tol_mask; + + val = simple_strtoul(buf, NULL, 10); + tol_mask = w83792d_read_value(client, + W83792D_REG_TOLERANCE[nr]) & ((nr == 1) ? 0x0f : 0xf0); + tol_tmp = SENSORS_LIMIT(val, 0, 15); + tol_tmp &= 0x0f; + data->tolerance[nr] = tol_tmp; + if (nr == 1) { + tol_tmp <<= 4; + } + w83792d_write_value(client, W83792D_REG_TOLERANCE[nr], + tol_mask | tol_tmp); + + return count; +} + +#define sysfs_tolerance(offset) \ +static SENSOR_DEVICE_ATTR(tolerance##offset, S_IRUGO | S_IWUSR, \ + show_tolerance, store_tolerance, offset); + +sysfs_tolerance(1); +sysfs_tolerance(2); +sysfs_tolerance(3); + +#define device_create_file_tolerance(client, offset) \ +do { \ +device_create_file(&client->dev, &sensor_dev_attr_tolerance##offset.dev_attr); \ +} while (0) + + +/* For Smart Fan II */ +static ssize_t +show_sf2_point(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + struct w83792d_data *data = w83792d_update_device(dev); + return sprintf(buf, "%ld\n", (long)data->sf2_points[index-1][nr-1]); +} + +static ssize_t +store_sf2_point(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr - 1; + int index = sensor_attr->index - 1; + struct i2c_client *client = to_i2c_client(dev); + struct w83792d_data *data = i2c_get_clientdata(client); + u32 val; + u8 mask_tmp = 0; + + val = simple_strtoul(buf, NULL, 10); + data->sf2_points[index][nr] = SENSORS_LIMIT(val, 0, 127); + mask_tmp = w83792d_read_value(client, + W83792D_REG_POINTS[index][nr]) & 0x80; + w83792d_write_value(client, W83792D_REG_POINTS[index][nr], + mask_tmp|data->sf2_points[index][nr]); + + return count; +} + +#define sysfs_sf2_point(offset, index) \ +static SENSOR_DEVICE_ATTR_2(sf2_point##offset##_fan##index, S_IRUGO | S_IWUSR, \ + show_sf2_point, store_sf2_point, offset, index); + +sysfs_sf2_point(1, 1); /* Fan1 */ +sysfs_sf2_point(2, 1); /* Fan1 */ +sysfs_sf2_point(3, 1); /* Fan1 */ +sysfs_sf2_point(4, 1); /* Fan1 */ +sysfs_sf2_point(1, 2); /* Fan2 */ +sysfs_sf2_point(2, 2); /* Fan2 */ +sysfs_sf2_point(3, 2); /* Fan2 */ +sysfs_sf2_point(4, 2); /* Fan2 */ +sysfs_sf2_point(1, 3); /* Fan3 */ +sysfs_sf2_point(2, 3); /* Fan3 */ +sysfs_sf2_point(3, 3); /* Fan3 */ +sysfs_sf2_point(4, 3); /* Fan3 */ + +#define device_create_file_sf2_point(client, offset, index) \ +do { \ +device_create_file(&client->dev, \ +&sensor_dev_attr_sf2_point##offset##_fan##index.dev_attr); \ +} while (0) + + +static ssize_t +show_sf2_level(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index; + struct w83792d_data *data = w83792d_update_device(dev); + return sprintf(buf, "%d\n", + (((data->sf2_levels[index-1][nr]) * 100) / 15)); +} + +static ssize_t +store_sf2_level(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr); + int nr = sensor_attr->nr; + int index = sensor_attr->index - 1; + struct i2c_client *client = to_i2c_client(dev); + struct w83792d_data *data = i2c_get_clientdata(client); + u32 val; + u8 mask_tmp=0, level_tmp=0; + + val = simple_strtoul(buf, NULL, 10); + data->sf2_levels[index][nr] = SENSORS_LIMIT((val * 15) / 100, 0, 15); + mask_tmp = w83792d_read_value(client, W83792D_REG_LEVELS[index][nr]) + & ((nr==3) ? 0xf0 : 0x0f); + if (nr==3) { + level_tmp = data->sf2_levels[index][nr]; + } else { + level_tmp = data->sf2_levels[index][nr] << 4; + } + w83792d_write_value(client, W83792D_REG_LEVELS[index][nr], level_tmp | mask_tmp); + + return count; +} + +#define sysfs_sf2_level(offset, index) \ +static SENSOR_DEVICE_ATTR_2(sf2_level##offset##_fan##index, S_IRUGO | S_IWUSR, \ + show_sf2_level, store_sf2_level, offset, index); + +sysfs_sf2_level(1, 1); /* Fan1 */ +sysfs_sf2_level(2, 1); /* Fan1 */ +sysfs_sf2_level(3, 1); /* Fan1 */ +sysfs_sf2_level(1, 2); /* Fan2 */ +sysfs_sf2_level(2, 2); /* Fan2 */ +sysfs_sf2_level(3, 2); /* Fan2 */ +sysfs_sf2_level(1, 3); /* Fan3 */ +sysfs_sf2_level(2, 3); /* Fan3 */ +sysfs_sf2_level(3, 3); /* Fan3 */ + +#define device_create_file_sf2_level(client, offset, index) \ +do { \ +device_create_file(&client->dev, \ +&sensor_dev_attr_sf2_level##offset##_fan##index.dev_attr); \ +} while (0) + + +/* This function is called when: + * w83792d_driver is inserted (when this module is loaded), for each + available adapter + * when a new adapter is inserted (and w83792d_driver is still present) */ +static int +w83792d_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_probe(adapter, &addr_data, w83792d_detect); +} + + +static int +w83792d_create_subclient(struct i2c_adapter *adapter, + struct i2c_client *new_client, int addr, + struct i2c_client **sub_cli) +{ + int err; + struct i2c_client *sub_client; + + (*sub_cli) = sub_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (!(sub_client)) { + return -ENOMEM; + } + memset(sub_client, 0x00, sizeof(struct i2c_client)); + sub_client->addr = 0x48 + addr; + i2c_set_clientdata(sub_client, NULL); + sub_client->adapter = adapter; + sub_client->driver = &w83792d_driver; + sub_client->flags = 0; + strlcpy(sub_client->name, "w83792d subclient", I2C_NAME_SIZE); + if ((err = i2c_attach_client(sub_client))) { + dev_err(&new_client->dev, "subclient registration " + "at address 0x%x failed\n", sub_client->addr); + kfree(sub_client); + return err; + } + return 0; +} + + +static int +w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, + struct i2c_client *new_client) +{ + int i, id, err; + u8 val; + struct w83792d_data *data = i2c_get_clientdata(new_client); + + id = i2c_adapter_id(adapter); + if (force_subclients[0] == id && force_subclients[1] == address) { + for (i = 2; i <= 3; i++) { + if (force_subclients[i] < 0x48 || + force_subclients[i] > 0x4f) { + dev_err(&new_client->dev, "invalid subclient " + "address %d; must be 0x48-0x4f\n", + force_subclients[i]); + err = -ENODEV; + goto ERROR_SC_0; + } + } + w83792d_write_value(new_client, W83792D_REG_I2C_SUBADDR, + (force_subclients[2] & 0x07) | + ((force_subclients[3] & 0x07) << 4)); + } + + val = w83792d_read_value(new_client, W83792D_REG_I2C_SUBADDR); + if (!(val & 0x08)) { + err = w83792d_create_subclient(adapter, new_client, val & 0x7, + &data->lm75[0]); + if (err < 0) + goto ERROR_SC_0; + } + if (!(val & 0x80)) { + if ((data->lm75[0] != NULL) && + ((val & 0x7) == ((val >> 4) & 0x7))) { + dev_err(&new_client->dev, "duplicate addresses 0x%x, " + "use force_subclient\n", data->lm75[0]->addr); + err = -ENODEV; + goto ERROR_SC_1; + } + err = w83792d_create_subclient(adapter, new_client, + (val >> 4) & 0x7, &data->lm75[1]); + if (err < 0) + goto ERROR_SC_1; + } + + return 0; + +/* Undo inits in case of errors */ + +ERROR_SC_1: + if (data->lm75[0] != NULL) { + i2c_detach_client(data->lm75[0]); + kfree(data->lm75[0]); + } +ERROR_SC_0: + return err; +} + + +static int +w83792d_detect(struct i2c_adapter *adapter, int address, int kind) +{ + int i = 0, val1 = 0, val2; + struct i2c_client *new_client; + struct w83792d_data *data; + int err = 0; + const char *client_name = ""; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + goto ERROR0; + } + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access w83792d_{read,write}_value. */ + + if (!(data = kmalloc(sizeof(struct w83792d_data), GFP_KERNEL))) { + err = -ENOMEM; + goto ERROR0; + } + memset(data, 0, sizeof(struct w83792d_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + init_MUTEX(&data->lock); + new_client->adapter = adapter; + new_client->driver = &w83792d_driver; + new_client->flags = 0; + + /* Now, we do the remaining detection. */ + + /* The w83792d may be stuck in some other bank than bank 0. This may + make reading other information impossible. Specify a force=... or + force_*=... parameter, and the Winbond will be reset to the right + bank. */ + if (kind < 0) { + if (w83792d_read_value(new_client, W83792D_REG_CONFIG) & 0x80) { + dev_warn(&new_client->dev, "Detection failed at step " + "3\n"); + goto ERROR1; + } + val1 = w83792d_read_value(new_client, W83792D_REG_BANK); + val2 = w83792d_read_value(new_client, W83792D_REG_CHIPMAN); + /* Check for Winbond ID if in bank 0 */ + if (!(val1 & 0x07)) { /* is Bank0 */ + if (((!(val1 & 0x80)) && (val2 != 0xa3)) || + ((val1 & 0x80) && (val2 != 0x5c))) { + goto ERROR1; + } + } + /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR + should match */ + if (w83792d_read_value(new_client, + W83792D_REG_I2C_ADDR) != address) { + dev_warn(&new_client->dev, "Detection failed " + "at step 5\n"); + goto ERROR1; + } + } + + /* We have either had a force parameter, or we have already detected the + Winbond. Put it now into bank 0 and Vendor ID High Byte */ + w83792d_write_value(new_client, + W83792D_REG_BANK, + (w83792d_read_value(new_client, + W83792D_REG_BANK) & 0x78) | 0x80); + + /* Determine the chip type. */ + if (kind <= 0) { + /* get vendor ID */ + val2 = w83792d_read_value(new_client, W83792D_REG_CHIPMAN); + if (val2 != 0x5c) { /* the vendor is NOT Winbond */ + goto ERROR1; + } + val1 = w83792d_read_value(new_client, W83792D_REG_WCHIPID); + if (val1 == 0x7a && address >= 0x2c) { + kind = w83792d; + } else { + if (kind == 0) + dev_warn(&new_client->dev, + "w83792d: Ignoring 'force' parameter for" + " unknown chip at adapter %d, address" + " 0x%02x\n", i2c_adapter_id(adapter), + address); + goto ERROR1; + } + } + + if (kind == w83792d) { + client_name = "w83792d"; + } else { + dev_err(&new_client->dev, "w83792d: Internal error: unknown" + " kind (%d)?!?", kind); + goto ERROR1; + } + + /* Fill in the remaining client fields and put into the global list */ + strlcpy(new_client->name, client_name, I2C_NAME_SIZE); + data->type = kind; + + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto ERROR1; + + if ((err = w83792d_detect_subclients(adapter, address, + kind, new_client))) + goto ERROR2; + + /* Initialize the chip */ + w83792d_init_client(new_client); + + /* A few vars need to be filled upon startup */ + for (i = 1; i <= 7; i++) { + data->fan_min[i - 1] = w83792d_read_value(new_client, + W83792D_REG_FAN_MIN[i]); + } + + /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto ERROR3; + } + device_create_file_in(new_client, 0); + device_create_file_in(new_client, 1); + device_create_file_in(new_client, 2); + device_create_file_in(new_client, 3); + device_create_file_in(new_client, 4); + device_create_file_in(new_client, 5); + device_create_file_in(new_client, 6); + device_create_file_in(new_client, 7); + device_create_file_in(new_client, 8); + + device_create_file_fan(new_client, 1); + device_create_file_fan(new_client, 2); + device_create_file_fan(new_client, 3); + device_create_file_fan(new_client, 4); + device_create_file_fan(new_client, 5); + device_create_file_fan(new_client, 6); + device_create_file_fan(new_client, 7); + + device_create_file_temp1(new_client); /* Temp1 */ + device_create_file_temp_add(new_client, 2); /* Temp2 */ + device_create_file_temp_add(new_client, 3); /* Temp3 */ + + device_create_file_alarms(new_client); + + device_create_file_pwm(new_client, 1); + device_create_file_pwm(new_client, 2); + device_create_file_pwm(new_client, 3); + + device_create_file_pwmenable(new_client, 1); + device_create_file_pwmenable(new_client, 2); + device_create_file_pwmenable(new_client, 3); + + device_create_file_pwm_mode(new_client, 1); + device_create_file_pwm_mode(new_client, 2); + device_create_file_pwm_mode(new_client, 3); + + device_create_file_chassis(new_client); + device_create_file_chassis_clear(new_client); + + device_create_file_thermal_cruise(new_client, 1); + device_create_file_thermal_cruise(new_client, 2); + device_create_file_thermal_cruise(new_client, 3); + + device_create_file_tolerance(new_client, 1); + device_create_file_tolerance(new_client, 2); + device_create_file_tolerance(new_client, 3); + + device_create_file_sf2_point(new_client, 1, 1); /* Fan1 */ + device_create_file_sf2_point(new_client, 2, 1); /* Fan1 */ + device_create_file_sf2_point(new_client, 3, 1); /* Fan1 */ + device_create_file_sf2_point(new_client, 4, 1); /* Fan1 */ + device_create_file_sf2_point(new_client, 1, 2); /* Fan2 */ + device_create_file_sf2_point(new_client, 2, 2); /* Fan2 */ + device_create_file_sf2_point(new_client, 3, 2); /* Fan2 */ + device_create_file_sf2_point(new_client, 4, 2); /* Fan2 */ + device_create_file_sf2_point(new_client, 1, 3); /* Fan3 */ + device_create_file_sf2_point(new_client, 2, 3); /* Fan3 */ + device_create_file_sf2_point(new_client, 3, 3); /* Fan3 */ + device_create_file_sf2_point(new_client, 4, 3); /* Fan3 */ + + device_create_file_sf2_level(new_client, 1, 1); /* Fan1 */ + device_create_file_sf2_level(new_client, 2, 1); /* Fan1 */ + device_create_file_sf2_level(new_client, 3, 1); /* Fan1 */ + device_create_file_sf2_level(new_client, 1, 2); /* Fan2 */ + device_create_file_sf2_level(new_client, 2, 2); /* Fan2 */ + device_create_file_sf2_level(new_client, 3, 2); /* Fan2 */ + device_create_file_sf2_level(new_client, 1, 3); /* Fan3 */ + device_create_file_sf2_level(new_client, 2, 3); /* Fan3 */ + device_create_file_sf2_level(new_client, 3, 3); /* Fan3 */ + + return 0; + +ERROR3: + if (data->lm75[0] != NULL) { + i2c_detach_client(data->lm75[0]); + kfree(data->lm75[0]); + } + if (data->lm75[1] != NULL) { + i2c_detach_client(data->lm75[1]); + kfree(data->lm75[1]); + } +ERROR2: + i2c_detach_client(new_client); +ERROR1: + kfree(data); +ERROR0: + return err; +} + +static int +w83792d_detach_client(struct i2c_client *client) +{ + struct w83792d_data *data = i2c_get_clientdata(client); + int err; + + /* main client */ + if (data) + hwmon_device_unregister(data->class_dev); + + if ((err = i2c_detach_client(client))) + return err; + + /* main client */ + if (data) + kfree(data); + /* subclient */ + else + kfree(client); + + return 0; +} + +/* The SMBus locks itself, usually, but nothing may access the Winbond between + bank switches. ISA access must always be locked explicitly! + We ignore the W83792D BUSY flag at this moment - it could lead to deadlocks, + would slow down the W83792D access and should not be necessary. + There are some ugly typecasts here, but the good news is - they should + nowhere else be necessary! */ +static int +w83792d_read_value(struct i2c_client *client, u8 reg) +{ + int res=0; + res = i2c_smbus_read_byte_data(client, reg); + + return res; +} + +static int +w83792d_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + i2c_smbus_write_byte_data(client, reg, value); + return 0; +} + +/* Called when we have found a new W83792D. It should set limits, etc. */ +static void +w83792d_init_client(struct i2c_client *client) +{ + u8 temp2_cfg, temp3_cfg, vid_in_b; + + if (init) { + w83792d_write_value(client, W83792D_REG_CONFIG, 0x80); + } + /* Clear the bit6 of W83792D_REG_VID_IN_B(set it into 0): + W83792D_REG_VID_IN_B bit6 = 0: the high/low limit of + vin0/vin1 can be modified by user; + W83792D_REG_VID_IN_B bit6 = 1: the high/low limit of + vin0/vin1 auto-updated, can NOT be modified by user. */ + vid_in_b = w83792d_read_value(client, W83792D_REG_VID_IN_B); + w83792d_write_value(client, W83792D_REG_VID_IN_B, + vid_in_b & 0xbf); + + temp2_cfg = w83792d_read_value(client, W83792D_REG_TEMP2_CONFIG); + temp3_cfg = w83792d_read_value(client, W83792D_REG_TEMP3_CONFIG); + w83792d_write_value(client, W83792D_REG_TEMP2_CONFIG, + temp2_cfg & 0xe6); + w83792d_write_value(client, W83792D_REG_TEMP3_CONFIG, + temp3_cfg & 0xe6); + + /* Start monitoring */ + w83792d_write_value(client, W83792D_REG_CONFIG, + (w83792d_read_value(client, + W83792D_REG_CONFIG) & 0xf7) + | 0x01); +} + +static struct w83792d_data *w83792d_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83792d_data *data = i2c_get_clientdata(client); + int i, j; + u8 reg_array_tmp[4], pwm_array_tmp[7], reg_tmp; + + down(&data->update_lock); + + if (time_after + (jiffies - data->last_updated, (unsigned long) (HZ * 3)) + || time_before(jiffies, data->last_updated) || !data->valid) { + dev_dbg(dev, "Starting device update\n"); + + /* Update the voltages measured value and limits */ + for (i = 0; i < 9; i++) { + data->in[i] = w83792d_read_value(client, + W83792D_REG_IN[i]); + data->in_max[i] = w83792d_read_value(client, + W83792D_REG_IN_MAX[i]); + data->in_min[i] = w83792d_read_value(client, + W83792D_REG_IN_MIN[i]); + } + data->low_bits[0] = w83792d_read_value(client, + W83792D_REG_LOW_BITS1); + data->low_bits[1] = w83792d_read_value(client, + W83792D_REG_LOW_BITS2); + for (i = 0; i < 7; i++) { + /* Update the Fan measured value and limits */ + data->fan[i] = w83792d_read_value(client, + W83792D_REG_FAN[i]); + data->fan_min[i] = w83792d_read_value(client, + W83792D_REG_FAN_MIN[i]); + /* Update the PWM/DC Value and PWM/DC flag */ + pwm_array_tmp[i] = w83792d_read_value(client, + W83792D_REG_PWM[i]); + data->pwm[i] = pwm_array_tmp[i] & 0x0f; + data->pwm_mode[i] = (pwm_array_tmp[i] >> 7) & 0x01; + } + + reg_tmp = w83792d_read_value(client, W83792D_REG_FAN_CFG); + data->pwmenable[0] = reg_tmp & 0x03; + data->pwmenable[1] = (reg_tmp>>2) & 0x03; + data->pwmenable[2] = (reg_tmp>>4) & 0x03; + + for (i = 0; i < 3; i++) { + data->temp1[i] = w83792d_read_value(client, + W83792D_REG_TEMP1[i]); + } + for (i = 0; i < 2; i++) { + for (j = 0; j < 6; j++) { + data->temp_add[i][j] = w83792d_read_value( + client,W83792D_REG_TEMP_ADD[i][j]); + } + } + + /* Update the Fan Divisor */ + for (i = 0; i < 4; i++) { + reg_array_tmp[i] = w83792d_read_value(client, + W83792D_REG_FAN_DIV[i]); + } + data->fan_div[0] = reg_array_tmp[0] & 0x07; + data->fan_div[1] = (reg_array_tmp[0] >> 4) & 0x07; + data->fan_div[2] = reg_array_tmp[1] & 0x07; + data->fan_div[3] = (reg_array_tmp[1] >> 4) & 0x07; + data->fan_div[4] = reg_array_tmp[2] & 0x07; + data->fan_div[5] = (reg_array_tmp[2] >> 4) & 0x07; + data->fan_div[6] = reg_array_tmp[3] & 0x07; + + /* Update the realtime status */ + data->alarms = w83792d_read_value(client, W83792D_REG_ALARM1) + + (w83792d_read_value(client, W83792D_REG_ALARM2) << 8) + + (w83792d_read_value(client, W83792D_REG_ALARM3) << 16); + + /* Update CaseOpen status and it's CLR_CHS. */ + data->chassis = (w83792d_read_value(client, + W83792D_REG_CHASSIS) >> 5) & 0x01; + data->chassis_clear = (w83792d_read_value(client, + W83792D_REG_CHASSIS_CLR) >> 7) & 0x01; + + /* Update Thermal Cruise/Smart Fan I target value */ + for (i = 0; i < 3; i++) { + data->thermal_cruise[i] = + w83792d_read_value(client, + W83792D_REG_THERMAL[i]) & 0x7f; + } + + /* Update Smart Fan I/II tolerance */ + reg_tmp = w83792d_read_value(client, W83792D_REG_TOLERANCE[0]); + data->tolerance[0] = reg_tmp & 0x0f; + data->tolerance[1] = (reg_tmp >> 4) & 0x0f; + data->tolerance[2] = w83792d_read_value(client, + W83792D_REG_TOLERANCE[2]) & 0x0f; + + /* Update Smart Fan II temperature points */ + for (i = 0; i < 3; i++) { + for (j = 0; j < 4; j++) { + data->sf2_points[i][j] = w83792d_read_value( + client,W83792D_REG_POINTS[i][j]) & 0x7f; + } + } + + /* Update Smart Fan II duty cycle levels */ + for (i = 0; i < 3; i++) { + reg_tmp = w83792d_read_value(client, + W83792D_REG_LEVELS[i][0]); + data->sf2_levels[i][0] = reg_tmp & 0x0f; + data->sf2_levels[i][1] = (reg_tmp >> 4) & 0x0f; + reg_tmp = w83792d_read_value(client, + W83792D_REG_LEVELS[i][2]); + data->sf2_levels[i][2] = (reg_tmp >> 4) & 0x0f; + data->sf2_levels[i][3] = reg_tmp & 0x0f; + } + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + +#ifdef DEBUG + w83792d_print_debug(data, dev); +#endif + + return data; +} + +#ifdef DEBUG +static void w83792d_print_debug(struct w83792d_data *data, struct device *dev) +{ + int i=0, j=0; + dev_dbg(dev, "==========The following is the debug message...========\n"); + dev_dbg(dev, "9 set of Voltages: =====>\n"); + for (i=0; i<9; i++) { + dev_dbg(dev, "vin[%d] is: 0x%x\n", i, data->in[i]); + dev_dbg(dev, "vin[%d] max is: 0x%x\n", i, data->in_max[i]); + dev_dbg(dev, "vin[%d] min is: 0x%x\n", i, data->in_min[i]); + } + dev_dbg(dev, "Low Bit1 is: 0x%x\n", data->low_bits[0]); + dev_dbg(dev, "Low Bit2 is: 0x%x\n", data->low_bits[1]); + dev_dbg(dev, "7 set of Fan Counts and Duty Cycles: =====>\n"); + for (i=0; i<7; i++) { + dev_dbg(dev, "fan[%d] is: 0x%x\n", i, data->fan[i]); + dev_dbg(dev, "fan[%d] min is: 0x%x\n", i, data->fan_min[i]); + dev_dbg(dev, "pwm[%d] is: 0x%x\n", i, data->pwm[i]); + dev_dbg(dev, "pwm_mode[%d] is: 0x%x\n", i, data->pwm_mode[i]); + } + dev_dbg(dev, "3 set of Temperatures: =====>\n"); + for (i=0; i<3; i++) { + dev_dbg(dev, "temp1[%d] is: 0x%x\n", i, data->temp1[i]); + } + + for (i=0; i<2; i++) { + for (j=0; j<6; j++) { + dev_dbg(dev, "temp_add[%d][%d] is: 0x%x\n", i, j, + data->temp_add[i][j]); + } + } + + for (i=0; i<7; i++) { + dev_dbg(dev, "fan_div[%d] is: 0x%x\n", i, data->fan_div[i]); + } + dev_dbg(dev, "==========End of the debug message...==================\n"); + dev_dbg(dev, "\n"); +} +#endif + +static int __init +sensors_w83792d_init(void) +{ + return i2c_add_driver(&w83792d_driver); +} + +static void __exit +sensors_w83792d_exit(void) +{ + i2c_del_driver(&w83792d_driver); +} + +MODULE_AUTHOR("Chunhao Huang @ Winbond "); +MODULE_DESCRIPTION("W83792AD/D driver for linux-2.6"); +MODULE_LICENSE("GPL"); + +module_init(sensors_w83792d_init); +module_exit(sensors_w83792d_exit); + diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c index 4469d52aba4c..133e34ab1d0a 100644 --- a/drivers/hwmon/w83l785ts.c +++ b/drivers/hwmon/w83l785ts.c @@ -36,7 +36,8 @@ #include #include #include -#include +#include +#include /* How many retries on register read error */ #define MAX_RETRIES 5 @@ -47,13 +48,12 @@ */ static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* * Insmod parameters */ -SENSORS_INSMOD_1(w83l785ts); +I2C_CLIENT_INSMOD_1(w83l785ts); /* * The W83L785TS-S registers @@ -105,6 +105,7 @@ static struct i2c_driver w83l785ts_driver = { struct w83l785ts_data { struct i2c_client client; + struct class_device *class_dev; struct semaphore update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ @@ -140,7 +141,7 @@ static int w83l785ts_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; - return i2c_detect(adapter, &addr_data, w83l785ts_detect); + return i2c_probe(adapter, &addr_data, w83l785ts_detect); } /* @@ -239,11 +240,19 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) */ /* Register sysfs hooks */ + data->class_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_detach; + } + device_create_file(&new_client->dev, &dev_attr_temp1_input); device_create_file(&new_client->dev, &dev_attr_temp1_max); return 0; +exit_detach: + i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -252,15 +261,15 @@ exit: static int w83l785ts_detach_client(struct i2c_client *client) { + struct w83l785ts_data *data = i2c_get_clientdata(client); int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } + hwmon_device_unregister(data->class_dev); - kfree(i2c_get_clientdata(client)); + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); return 0; } diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index cd170395a8c7..71c5a854ac5d 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -4,12 +4,8 @@ obj-$(CONFIG_I2C) += i2c-core.o obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o -obj-$(CONFIG_I2C_SENSOR) += i2c-sensor.o obj-y += busses/ chips/ algos/ -i2c-sensor-objs := i2c-sensor-detect.o i2c-sensor-vid.o - - ifeq ($(CONFIG_I2C_DEBUG_CORE),y) EXTRA_CFLAGS += -DDEBUG endif diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index fb5b732238ed..df05df1a0ef6 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -519,8 +519,6 @@ static u32 bit_func(struct i2c_adapter *adap) /* -----exported algorithm data: ------------------------------------- */ static struct i2c_algorithm i2c_bit_algo = { - .name = "Bit-shift algorithm", - .id = I2C_ALGO_BIT, .master_xfer = bit_xfer, .functionality = bit_func, }; @@ -541,8 +539,6 @@ int i2c_bit_add_bus(struct i2c_adapter *adap) DEB2(dev_dbg(&adap->dev, "hw routines registered.\n")); /* register new adapter to i2c module... */ - - adap->id |= i2c_bit_algo.id; adap->algo = &i2c_bit_algo; adap->timeout = 100; /* default values, should */ diff --git a/drivers/i2c/algos/i2c-algo-ite.c b/drivers/i2c/algos/i2c-algo-ite.c index e6cae39f47aa..2db7bfc85225 100644 --- a/drivers/i2c/algos/i2c-algo-ite.c +++ b/drivers/i2c/algos/i2c-algo-ite.c @@ -713,8 +713,6 @@ static u32 iic_func(struct i2c_adapter *adap) /* -----exported algorithm data: ------------------------------------- */ static struct i2c_algorithm iic_algo = { - .name = "ITE IIC algorithm", - .id = I2C_ALGO_IIC, .master_xfer = iic_xfer, .algo_control = algo_control, /* ioctl */ .functionality = iic_func, @@ -738,8 +736,6 @@ int i2c_iic_add_bus(struct i2c_adapter *adap) adap->name)); /* register new adapter to i2c module... */ - - adap->id |= iic_algo.id; adap->algo = &iic_algo; adap->timeout = 100; /* default values, should */ diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index cc3a952401f2..beb10edfe9c1 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -187,12 +187,14 @@ static int pca_xfer(struct i2c_adapter *i2c_adap, int numbytes = 0; int state; int ret; + int timeout = 100; - state = pca_status(adap); - if ( state != 0xF8 ) { - dev_dbg(&i2c_adap->dev, "bus is not idle. status is %#04x\n", state ); - /* FIXME: what to do. Force stop ? */ - return -EREMOTEIO; + while ((state = pca_status(adap)) != 0xf8 && timeout--) { + msleep(10); + } + if (state != 0xf8) { + dev_dbg(&i2c_adap->dev, "bus is not idle. status is %#04x\n", state); + return -EIO; } DEB1("{{{ XFER %d messages\n", num); @@ -354,8 +356,6 @@ static int pca_init(struct i2c_algo_pca_data *adap) } static struct i2c_algorithm pca_algo = { - .name = "PCA9564 algorithm", - .id = I2C_ALGO_PCA, .master_xfer = pca_xfer, .functionality = pca_func, }; @@ -369,8 +369,6 @@ int i2c_pca_add_bus(struct i2c_adapter *adap) int rval; /* register new adapter to i2c module... */ - - adap->id |= pca_algo.id; adap->algo = &pca_algo; adap->timeout = 100; /* default values, should */ diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c index 8d087dac32af..6e498df1f717 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.c +++ b/drivers/i2c/algos/i2c-algo-pcf.c @@ -459,8 +459,6 @@ static u32 pcf_func(struct i2c_adapter *adap) /* -----exported algorithm data: ------------------------------------- */ static struct i2c_algorithm pcf_algo = { - .name = "PCF8584 algorithm", - .id = I2C_ALGO_PCF, .master_xfer = pcf_xfer, .functionality = pcf_func, }; @@ -476,8 +474,6 @@ int i2c_pcf_add_bus(struct i2c_adapter *adap) DEB2(dev_dbg(&adap->dev, "hw routines registered.\n")); /* register new adapter to i2c module... */ - - adap->id |= pcf_algo.id; adap->algo = &pcf_algo; adap->timeout = 100; /* default values, should */ diff --git a/drivers/i2c/algos/i2c-algo-sgi.c b/drivers/i2c/algos/i2c-algo-sgi.c index 422721b241e5..932c4fa86c73 100644 --- a/drivers/i2c/algos/i2c-algo-sgi.c +++ b/drivers/i2c/algos/i2c-algo-sgi.c @@ -149,7 +149,7 @@ static int sgi_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, err = i2c_write(adap, p->buf, p->len); } - return err; + return (err < 0) ? err : i; } static u32 sgi_func(struct i2c_adapter *adap) @@ -158,8 +158,6 @@ static u32 sgi_func(struct i2c_adapter *adap) } static struct i2c_algorithm sgi_algo = { - .name = "SGI algorithm", - .id = I2C_ALGO_SGI, .master_xfer = sgi_xfer, .functionality = sgi_func, }; @@ -169,7 +167,6 @@ static struct i2c_algorithm sgi_algo = { */ int i2c_sgi_add_bus(struct i2c_adapter *adap) { - adap->id |= sgi_algo.id; adap->algo = &sgi_algo; return i2c_add_adapter(adap); diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c index f2785499237b..8ed5ad12552f 100644 --- a/drivers/i2c/algos/i2c-algo-sibyte.c +++ b/drivers/i2c/algos/i2c-algo-sibyte.c @@ -135,8 +135,6 @@ static u32 bit_func(struct i2c_adapter *adap) /* -----exported algorithm data: ------------------------------------- */ static struct i2c_algorithm i2c_sibyte_algo = { - .name = "SiByte algorithm", - .id = I2C_ALGO_SIBYTE, .smbus_xfer = smbus_xfer, .algo_control = algo_control, /* ioctl */ .functionality = bit_func, @@ -151,8 +149,6 @@ int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed) struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data; /* register new adapter to i2c module... */ - - i2c_adap->id |= i2c_sibyte_algo.id; i2c_adap->algo = &i2c_sibyte_algo; /* Set the frequency to 100 kHz */ diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 916ba5e40a96..6e9da1372225 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -182,14 +182,8 @@ config I2C_IOP3XX will be called i2c-iop3xx. config I2C_ISA - tristate "ISA Bus support" + tristate depends on I2C - help - If you say yes to this option, support will be included for i2c - interfaces that are on the ISA bus. - - This driver can also be built as a module. If so, the module - will be called i2c-isa. config I2C_ITE tristate "ITE I2C Adapter" diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index f634a0780cf0..f021acd2674e 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -472,8 +472,6 @@ static u32 ali1535_func(struct i2c_adapter *adapter) } static struct i2c_algorithm smbus_algorithm = { - .name = "Non-i2c SMBus adapter", - .id = I2C_ALGO_SMBUS, .smbus_xfer = ali1535_access, .functionality = ali1535_func, }; diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index fdd881aee618..86947504aea1 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -366,8 +366,6 @@ static void ali1563_shutdown(struct pci_dev *dev) } static struct i2c_algorithm ali1563_algorithm = { - .name = "Non-i2c SMBus adapter", - .id = I2C_ALGO_SMBUS, .smbus_xfer = ali1563_access, .functionality = ali1563_func, }; diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 0f781a1a3323..b3f50bff39a0 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -462,8 +462,6 @@ static u32 ali15x3_func(struct i2c_adapter *adapter) } static struct i2c_algorithm smbus_algorithm = { - .name = "Non-I2C SMBus adapter", - .id = I2C_ALGO_SMBUS, .smbus_xfer = ali15x3_access, .functionality = ali15x3_func, }; diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 6347ebc6fb53..6ad0603384b8 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -295,8 +295,6 @@ static u32 amd756_func(struct i2c_adapter *adapter) } static struct i2c_algorithm smbus_algorithm = { - .name = "Non-I2C SMBus adapter", - .id = I2C_ALGO_SMBUS, .smbus_xfer = amd756_access, .functionality = amd756_func, }; diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index d6644481d2a0..45ea24ba14d5 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -323,8 +323,6 @@ static u32 amd8111_func(struct i2c_adapter *adapter) } static struct i2c_algorithm smbus_algorithm = { - .name = "Non-I2C SMBus 2.0 adapter", - .id = I2C_ALGO_SMBUS, .smbus_xfer = amd8111_access, .functionality = amd8111_func, }; diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c index a7ff112e49bf..d06edce03bf4 100644 --- a/drivers/i2c/busses/i2c-au1550.c +++ b/drivers/i2c/busses/i2c-au1550.c @@ -283,8 +283,6 @@ au1550_func(struct i2c_adapter *adap) } static struct i2c_algorithm au1550_algo = { - .name = "Au1550 algorithm", - .id = I2C_ALGO_AU1550, .master_xfer = au1550_xfer, .functionality = au1550_func, }; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 1ab41313ce51..709beab76609 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -535,8 +535,6 @@ static u32 i801_func(struct i2c_adapter *adapter) } static struct i2c_algorithm smbus_algorithm = { - .name = "Non-I2C SMBus adapter", - .id = I2C_ALGO_SMBUS, .smbus_xfer = i801_access, .functionality = i801_func, }; diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 93ca36dc777e..a3ed9590f028 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -627,8 +627,6 @@ static u32 iic_func(struct i2c_adapter *adap) } static struct i2c_algorithm iic_algo = { - .name = "IBM IIC algorithm", - .id = I2C_ALGO_OCP, .master_xfer = iic_xfer, .functionality = iic_func }; @@ -727,7 +725,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){ adap = &dev->adap; strcpy(adap->name, "IBM IIC"); i2c_set_adapdata(adap, dev); - adap->id = I2C_HW_OCP | iic_algo.id; + adap->id = I2C_HW_OCP; adap->algo = &iic_algo; adap->client_register = NULL; adap->client_unregister = NULL; diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 6b682e903f09..7bd9102db701 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -399,8 +399,6 @@ iop3xx_i2c_func(struct i2c_adapter *adap) } static struct i2c_algorithm iop3xx_i2c_algo = { - .name = "IOP3xx I2C algorithm", - .id = I2C_ALGO_IOP3XX, .master_xfer = iop3xx_i2c_master_xfer, .algo_control = iop3xx_i2c_algo_control, .functionality = iop3xx_i2c_func, diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c index 00e7f7157b75..bdc6806dafae 100644 --- a/drivers/i2c/busses/i2c-isa.c +++ b/drivers/i2c/busses/i2c-isa.c @@ -1,6 +1,8 @@ /* - i2c-isa.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring + i2c-isa.c - an i2c-core-like thing for ISA hardware monitoring chips + Copyright (C) 2005 Jean Delvare + + Based on the i2c-isa pseudo-adapter from the lm_sensors project Copyright (c) 1998, 1999 Frodo Looijaard This program is free software; you can redistribute it and/or modify @@ -18,30 +20,36 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* This implements an i2c algorithm/adapter for ISA bus. Not that this is - on first sight very useful; almost no functionality is preserved. - Except that it makes writing drivers for chips which can be on both - the SMBus and the ISA bus very much easier. See lm78.c for an example - of this. */ +/* This implements an i2c-core-like thing for ISA hardware monitoring + chips. Such chips are linked to the i2c subsystem for historical + reasons (because the early ISA hardware monitoring chips such as the + LM78 had both an I2C and an ISA interface). They used to be + registered with the main i2c-core, but as a first step in the + direction of a clean separation between I2C and ISA chip drivers, + we now have this separate core for ISA ones. It is significantly + more simple than the real one, of course, because we don't have to + handle multiple busses: there is only one (fake) ISA adapter. + It is worth noting that we still rely on i2c-core for some things + at the moment - but hopefully this won't last. */ #include #include #include #include #include +#include static u32 isa_func(struct i2c_adapter *adapter); /* This is the actual algorithm we define */ static struct i2c_algorithm isa_algorithm = { - .name = "ISA bus algorithm", - .id = I2C_ALGO_ISA, .functionality = isa_func, }; /* There can only be one... */ static struct i2c_adapter isa_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_ISA, .class = I2C_CLASS_HWMON, .algo = &isa_algorithm, .name = "ISA main adapter", @@ -53,17 +61,146 @@ static u32 isa_func(struct i2c_adapter *adapter) return 0; } + +/* Copied from i2c-core */ +static ssize_t show_adapter_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_adapter *adap = dev_to_i2c_adapter(dev); + return sprintf(buf, "%s\n", adap->name); +} +static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL); + +static int i2c_isa_device_probe(struct device *dev) +{ + return -ENODEV; +} + +static int i2c_isa_device_remove(struct device *dev) +{ + return 0; +} + + +/* We implement an interface which resembles i2c_{add,del}_driver, + but for i2c-isa drivers. We don't have to remember and handle lists + of drivers and adapters so this is much more simple, of course. */ + +int i2c_isa_add_driver(struct i2c_driver *driver) +{ + int res; + + /* Add the driver to the list of i2c drivers in the driver core */ + driver->driver.name = driver->name; + driver->driver.bus = &i2c_bus_type; + driver->driver.probe = i2c_isa_device_probe; + driver->driver.remove = i2c_isa_device_remove; + res = driver_register(&driver->driver); + if (res) + return res; + dev_dbg(&isa_adapter.dev, "Driver %s registered\n", driver->name); + + /* Now look for clients */ + driver->attach_adapter(&isa_adapter); + + return 0; +} + +int i2c_isa_del_driver(struct i2c_driver *driver) +{ + struct list_head *item, *_n; + struct i2c_client *client; + int res; + + /* Detach all clients belonging to this one driver */ + list_for_each_safe(item, _n, &isa_adapter.clients) { + client = list_entry(item, struct i2c_client, list); + if (client->driver != driver) + continue; + dev_dbg(&isa_adapter.dev, "Detaching client %s at 0x%x\n", + client->name, client->addr); + if ((res = driver->detach_client(client))) { + dev_err(&isa_adapter.dev, "Failed, driver " + "%s not unregistered!\n", + driver->name); + return res; + } + } + + /* Get the driver off the core list */ + driver_unregister(&driver->driver); + dev_dbg(&isa_adapter.dev, "Driver %s unregistered\n", driver->name); + + return 0; +} + + static int __init i2c_isa_init(void) { - return i2c_add_adapter(&isa_adapter); + init_MUTEX(&isa_adapter.clist_lock); + INIT_LIST_HEAD(&isa_adapter.clients); + + isa_adapter.nr = ANY_I2C_ISA_BUS; + isa_adapter.dev.parent = &platform_bus; + sprintf(isa_adapter.dev.bus_id, "i2c-%d", isa_adapter.nr); + isa_adapter.dev.driver = &i2c_adapter_driver; + isa_adapter.dev.release = &i2c_adapter_dev_release; + device_register(&isa_adapter.dev); + device_create_file(&isa_adapter.dev, &dev_attr_name); + + /* Add this adapter to the i2c_adapter class */ + memset(&isa_adapter.class_dev, 0x00, sizeof(struct class_device)); + isa_adapter.class_dev.dev = &isa_adapter.dev; + isa_adapter.class_dev.class = &i2c_adapter_class; + strlcpy(isa_adapter.class_dev.class_id, isa_adapter.dev.bus_id, + BUS_ID_SIZE); + class_device_register(&isa_adapter.class_dev); + + dev_dbg(&isa_adapter.dev, "%s registered\n", isa_adapter.name); + + return 0; } static void __exit i2c_isa_exit(void) { - i2c_del_adapter(&isa_adapter); +#ifdef DEBUG + struct list_head *item, *_n; + struct i2c_client *client = NULL; +#endif + + /* There should be no more active client */ +#ifdef DEBUG + dev_dbg(&isa_adapter.dev, "Looking for clients\n"); + list_for_each_safe(item, _n, &isa_adapter.clients) { + client = list_entry(item, struct i2c_client, list); + dev_err(&isa_adapter.dev, "Driver %s still has an active " + "ISA client at 0x%x\n", client->driver->name, + client->addr); + } + if (client != NULL) + return; +#endif + + /* Clean up the sysfs representation */ + dev_dbg(&isa_adapter.dev, "Unregistering from sysfs\n"); + init_completion(&isa_adapter.dev_released); + init_completion(&isa_adapter.class_dev_released); + class_device_unregister(&isa_adapter.class_dev); + device_remove_file(&isa_adapter.dev, &dev_attr_name); + device_unregister(&isa_adapter.dev); + + /* Wait for sysfs to drop all references */ + dev_dbg(&isa_adapter.dev, "Waiting for sysfs completion\n"); + wait_for_completion(&isa_adapter.dev_released); + wait_for_completion(&isa_adapter.class_dev_released); + + dev_dbg(&isa_adapter.dev, "%s unregistered\n", isa_adapter.name); } -MODULE_AUTHOR("Frodo Looijaard "); +EXPORT_SYMBOL(i2c_isa_add_driver); +EXPORT_SYMBOL(i2c_isa_del_driver); + +MODULE_AUTHOR("Jean Delvare "); MODULE_DESCRIPTION("ISA bus access through i2c"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c index 94ae808314f7..37b49c2daf5f 100644 --- a/drivers/i2c/busses/i2c-keywest.c +++ b/drivers/i2c/busses/i2c-keywest.c @@ -87,12 +87,9 @@ static const char *__kw_state_names[] = { }; #endif /* DEBUG */ -static int probe; - MODULE_AUTHOR("Benjamin Herrenschmidt "); MODULE_DESCRIPTION("I2C driver for Apple's Keywest"); MODULE_LICENSE("GPL"); -module_param(probe, bool, 0); #ifdef POLLED_MODE /* Don't schedule, the g5 fan controller is too @@ -498,8 +495,6 @@ keywest_func(struct i2c_adapter * adapter) /* For now, we only handle combined mode (smbus) */ static struct i2c_algorithm keywest_algorithm = { - .name = "Keywest i2c", - .id = I2C_ALGO_SMBUS, .smbus_xfer = keywest_smbus_xfer, .master_xfer = keywest_xfer, .functionality = keywest_func, @@ -621,7 +616,6 @@ create_iface(struct device_node *np, struct device *dev) sprintf(chan->adapter.name, "%s %d", np->parent->name, i); chan->iface = iface; chan->chan_no = i; - chan->adapter.id = I2C_ALGO_SMBUS; chan->adapter.algo = &keywest_algorithm; chan->adapter.algo_data = NULL; chan->adapter.client_register = NULL; @@ -635,15 +629,6 @@ create_iface(struct device_node *np, struct device *dev) chan->adapter.name); i2c_set_adapdata(&chan->adapter, NULL); } - if (probe) { - printk("Probe: "); - for (addr = 0x00; addr <= 0x7f; addr++) { - if (i2c_smbus_xfer(&chan->adapter,addr, - 0,0,0,I2C_SMBUS_QUICK,NULL) >= 0) - printk("%02x ", addr); - } - printk("\n"); - } } printk(KERN_INFO "Found KeyWest i2c on \"%s\", %d channel%s, stepping: %d bits\n", diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 9ad3e9262e8a..f065583ddcf1 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -272,8 +272,6 @@ static u32 mpc_functionality(struct i2c_adapter *adap) } static struct i2c_algorithm mpc_algo = { - .name = "MPC algorithm", - .id = I2C_ALGO_MPC107, .master_xfer = mpc_xfer, .functionality = mpc_functionality, }; @@ -281,7 +279,7 @@ static struct i2c_algorithm mpc_algo = { static struct i2c_adapter mpc_ops = { .owner = THIS_MODULE, .name = "MPC adapter", - .id = I2C_ALGO_MPC107 | I2C_HW_MPC107, + .id = I2C_HW_MPC107, .algo = &mpc_algo, .class = I2C_CLASS_HWMON, .timeout = 1, diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 5b852782d2f5..99abca45fece 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -423,18 +423,16 @@ static int mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap); - int i, rc = 0; + int i, rc; for (i=0; ifreq_m = pdata->freq_m; drv_data->freq_n = pdata->freq_n; drv_data->irq = platform_get_irq(pd, 0); - drv_data->adapter.id = I2C_ALGO_MV64XXX | I2C_HW_MV64XXX; + drv_data->adapter.id = I2C_HW_MV64XXX; drv_data->adapter.algo = &mv64xxx_i2c_algo; drv_data->adapter.owner = THIS_MODULE; drv_data->adapter.class = I2C_CLASS_HWMON; diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 74eb89aa9350..e0b7a913431e 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -110,8 +110,6 @@ static u32 nforce2_func(struct i2c_adapter *adapter); static struct i2c_algorithm smbus_algorithm = { - .name = "Non-I2C SMBus adapter", - .id = I2C_ALGO_SMBUS, .smbus_xfer = nforce2_access, .functionality = nforce2_func, }; @@ -131,7 +129,6 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, struct nforce2_smbus *smbus = adap->algo_data; unsigned char protocol, pec, temp; unsigned char len = 0; /* to keep the compiler quiet */ - int timeout = 0; int i; protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ : @@ -191,29 +188,10 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, case I2C_SMBUS_PROC_CALL: dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); return -1; - /* - outb_p(command, NVIDIA_SMB_CMD); - outb_p(data->word, NVIDIA_SMB_DATA); - outb_p(data->word >> 8, NVIDIA_SMB_DATA + 1); - protocol = NVIDIA_SMB_PRTCL_PROC_CALL | pec; - read_write = I2C_SMBUS_READ; - break; - */ case I2C_SMBUS_BLOCK_PROC_CALL: dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n"); return -1; - /* - protocol |= pec; - len = min_t(u8, data->block[0], 31); - outb_p(command, NVIDIA_SMB_CMD); - outb_p(len, NVIDIA_SMB_BCNT); - for (i = 0; i < len; i++) - outb_p(data->block[i + 1], NVIDIA_SMB_DATA + i); - protocol = NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL | pec; - read_write = I2C_SMBUS_READ; - break; - */ case I2C_SMBUS_WORD_DATA_PEC: case I2C_SMBUS_BLOCK_DATA_PEC: @@ -232,12 +210,6 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, temp = inb_p(NVIDIA_SMB_STS); -#if 0 - do { - i2c_do_pause(1); - temp = inb_p(NVIDIA_SMB_STS); - } while (((temp & NVIDIA_SMB_STS_DONE) == 0) && (timeout++ < MAX_TIMEOUT)); -#endif if (~temp & NVIDIA_SMB_STS_DONE) { udelay(500); temp = inb_p(NVIDIA_SMB_STS); @@ -247,9 +219,10 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, temp = inb_p(NVIDIA_SMB_STS); } - if ((timeout >= MAX_TIMEOUT) || (~temp & NVIDIA_SMB_STS_DONE) - || (temp & NVIDIA_SMB_STS_STATUS)) + if ((~temp & NVIDIA_SMB_STS_DONE) || (temp & NVIDIA_SMB_STS_STATUS)) { + dev_dbg(&adap->dev, "SMBus Timeout! (0x%02x)\n", temp); return -1; + } if (read_write == I2C_SMBUS_WRITE) return 0; diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 6d34ee381ce1..6d48a4da7bed 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -399,8 +399,6 @@ static u32 piix4_func(struct i2c_adapter *adapter) } static struct i2c_algorithm smbus_algorithm = { - .name = "Non-I2C SMBus adapter", - .id = I2C_ALGO_SMBUS, .smbus_xfer = piix4_access, .functionality = piix4_func, }; diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index a3b38257cc3d..73a092fb0e7e 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -568,7 +568,6 @@ static u32 s3c24xx_i2c_func(struct i2c_adapter *adap) /* i2c bus registration info */ static struct i2c_algorithm s3c24xx_i2c_algorithm = { - .name = "S3C2410-I2C-Algorithm", .master_xfer = s3c24xx_i2c_xfer, .functionality = s3c24xx_i2c_func, }; diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index bbd5e4e52f09..080318d6f54b 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -357,8 +357,6 @@ static u32 sis5595_func(struct i2c_adapter *adapter) } static struct i2c_algorithm smbus_algorithm = { - .name = "Non-I2C SMBus adapter", - .id = I2C_ALGO_SMBUS, .smbus_xfer = sis5595_access, .functionality = sis5595_func, }; diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index f58455e7689e..86f0f448fa0b 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -448,8 +448,6 @@ exit: static struct i2c_algorithm smbus_algorithm = { - .name = "Non-I2C SMBus adapter", - .id = I2C_ALGO_SMBUS, .smbus_xfer = sis630_access, .functionality = sis630_func, }; diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 6484792e23a1..ead2ff3cf60e 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -249,8 +249,6 @@ static u32 sis96x_func(struct i2c_adapter *adapter) } static struct i2c_algorithm smbus_algorithm = { - .name = "Non-I2C SMBus adapter", - .id = I2C_ALGO_SMBUS, .smbus_xfer = sis96x_access, .functionality = sis96x_func, }; diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c index 00d94e886955..73f481e93a36 100644 --- a/drivers/i2c/busses/i2c-stub.c +++ b/drivers/i2c/busses/i2c-stub.c @@ -109,8 +109,6 @@ static u32 stub_func(struct i2c_adapter *adapter) } static struct i2c_algorithm smbus_algorithm = { - .name = "Non-I2C SMBus adapter", - .id = I2C_ALGO_SMBUS, .functionality = stub_func, .smbus_xfer = stub_xfer, }; diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 6b5008005c6f..99d209e0485a 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -286,8 +286,6 @@ static u32 vt596_func(struct i2c_adapter *adapter) } static struct i2c_algorithm smbus_algorithm = { - .name = "Non-I2C SMBus adapter", - .id = I2C_ALGO_SMBUS, .smbus_xfer = vt596_access, .functionality = vt596_func, }; diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index a18bdd9aa7ba..a1d580e05361 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -395,8 +395,6 @@ static u32 scx200_acb_func(struct i2c_adapter *adapter) /* For now, we only handle combined mode (smbus) */ static struct i2c_algorithm scx200_acb_algorithm = { - .name = "NatSemi SCx200 ACCESS.bus", - .id = I2C_ALGO_SMBUS, .smbus_xfer = scx200_acb_smbus_xfer, .functionality = scx200_acb_func, }; @@ -456,7 +454,7 @@ static int __init scx200_acb_create(int base, int index) i2c_set_adapdata(adapter, iface); snprintf(adapter->name, I2C_NAME_SIZE, "SCx200 ACB%d", index); adapter->owner = THIS_MODULE; - adapter->id = I2C_ALGO_SMBUS; + adapter->id = I2C_HW_SMBUS_SCX200; adapter->algo = &scx200_acb_algorithm; adapter->class = I2C_CLASS_HWMON; diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 43f70dbfc03f..6bd44a44cd28 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -2,17 +2,12 @@ # Miscellaneous I2C chip drivers configuration # -config I2C_SENSOR - tristate - default n - menu "Miscellaneous I2C Chip support" depends on I2C config SENSORS_DS1337 tristate "Dallas Semiconductor DS1337 and DS1339 Real Time Clock" depends on I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for Dallas Semiconductor DS1337 and DS1339 real-time clock chips. @@ -23,7 +18,6 @@ config SENSORS_DS1337 config SENSORS_DS1374 tristate "Maxim/Dallas Semiconductor DS1374 Real Time Clock" depends on I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for Dallas Semiconductor DS1374 real-time clock chips. @@ -34,7 +28,6 @@ config SENSORS_DS1374 config SENSORS_EEPROM tristate "EEPROM reader" depends on I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get read-only access to the EEPROM data available on modern memory DIMMs and Sony Vaio laptops. Such @@ -46,7 +39,6 @@ config SENSORS_EEPROM config SENSORS_PCF8574 tristate "Philips PCF8574 and PCF8574A" depends on I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for Philips PCF8574 and PCF8574A chips. @@ -67,7 +59,6 @@ config SENSORS_PCA9539 config SENSORS_PCF8591 tristate "Philips PCF8591" depends on I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for Philips PCF8591 chips. @@ -77,7 +68,6 @@ config SENSORS_PCF8591 config SENSORS_RTC8564 tristate "Epson 8564 RTC chip" depends on I2C && EXPERIMENTAL - select I2C_SENSOR help If you say yes here you get support for the Epson 8564 RTC chip. diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c index 82cf959989fd..9d3175c03395 100644 --- a/drivers/i2c/chips/ds1337.c +++ b/drivers/i2c/chips/ds1337.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include /* get the user-level API */ #include @@ -39,9 +38,8 @@ * Functions declaration */ static unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; -SENSORS_INSMOD_1(ds1337); +I2C_CLIENT_INSMOD_1(ds1337); static int ds1337_attach_adapter(struct i2c_adapter *adapter); static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind); @@ -227,7 +225,7 @@ int ds1337_do_command(int bus, int cmd, void *arg) static int ds1337_attach_adapter(struct i2c_adapter *adapter) { - return i2c_detect(adapter, &addr_data, ds1337_detect); + return i2c_probe(adapter, &addr_data, ds1337_detect); } /* @@ -354,11 +352,8 @@ static int ds1337_detach_client(struct i2c_client *client) int err; struct ds1337_data *data = i2c_get_clientdata(client); - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); + if ((err = i2c_detach_client(client))) return err; - } list_del(&data->list); kfree(data); diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c index a445736d8838..0936327a946d 100644 --- a/drivers/i2c/chips/ds1374.c +++ b/drivers/i2c/chips/ds1374.c @@ -53,7 +53,6 @@ static struct i2c_client_address_data addr_data = { .normal_i2c = normal_addr, .probe = ignore, .ignore = ignore, - .force = ignore, }; static ulong ds1374_read_rtc(void) @@ -166,7 +165,7 @@ static void ds1374_set_tlet(ulong arg) "can't confirm time set from rtc chip\n"); } -ulong new_time; +static ulong new_time; DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet, (ulong) & new_time); diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index a2da31b0dd7b..d58403a47908 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -33,15 +33,13 @@ #include #include #include -#include /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* Insmod parameters */ -SENSORS_INSMOD_1(eeprom); +I2C_CLIENT_INSMOD_1(eeprom); /* Size of EEPROM in bytes */ @@ -153,21 +151,16 @@ static struct bin_attribute eeprom_attr = { static int eeprom_attach_adapter(struct i2c_adapter *adapter) { - return i2c_detect(adapter, &addr_data, eeprom_detect); + return i2c_probe(adapter, &addr_data, eeprom_detect); } -/* This function is called by i2c_detect */ +/* This function is called by i2c_probe */ int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; struct eeprom_data *data; int err = 0; - /* prevent 24RF08 corruption */ - if (kind < 0) - i2c_smbus_xfer(adapter, address, 0, 0, 0, - I2C_SMBUS_QUICK, NULL); - /* There are three ways we can read the EEPROM data: (1) I2C block reads (faster, but unsupported by most adapters) (2) Consecutive byte reads (100% overhead) @@ -231,10 +224,8 @@ static int eeprom_detach_client(struct i2c_client *client) int err; err = i2c_detach_client(client); - if (err) { - dev_err(&client->dev, "Client deregistration failed, client not detached.\n"); + if (err) return err; - } kfree(i2c_get_clientdata(client)); diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c index 778d7e12859d..3f14528a52a9 100644 --- a/drivers/i2c/chips/m41t00.c +++ b/drivers/i2c/chips/m41t00.c @@ -42,7 +42,6 @@ static struct i2c_client_address_data addr_data = { .normal_i2c = normal_addr, .probe = ignore, .ignore = ignore, - .force = ignore, }; ulong @@ -145,7 +144,7 @@ m41t00_set_tlet(ulong arg) return; } -ulong new_time; +static ulong new_time; DECLARE_TASKLET_DISABLED(m41t00_tasklet, m41t00_set_tlet, (ulong)&new_time); diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c index 0230375f72e5..9e1aeb69abf9 100644 --- a/drivers/i2c/chips/max6875.c +++ b/drivers/i2c/chips/max6875.c @@ -5,97 +5,60 @@ Based on i2c/chips/eeprom.c - The MAX6875 has two EEPROM sections: config and user. - At reset, the config EEPROM is read into the registers. + The MAX6875 has a bank of registers and two banks of EEPROM. + Address ranges are defined as follows: + * 0x0000 - 0x0046 = configuration registers + * 0x8000 - 0x8046 = configuration EEPROM + * 0x8100 - 0x82FF = user EEPROM - This driver make 3 binary files available in sysfs: - reg_config - direct access to the registers - eeprom_config - acesses configuration eeprom space - eeprom_user - free for application use + This driver makes the user EEPROM available for read. - In our application, we put device serial & model numbers in user eeprom. + The registers & config EEPROM should be accessed via i2c-dev. - Notes: - 1) The datasheet says that register 0x44 / EEPROM 0x8044 should NOT - be overwritten, so the driver explicitly prevents that. - 2) It's a good idea to keep the config (0x45) locked in config EEPROM. - You can temporarily enable config writes by changing register 0x45. + The MAX6875 ignores the lowest address bit, so each chip responds to + two addresses - 0x50/0x51 and 0x52/0x53. + + Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read + address, so this driver is destructive if loaded for the wrong EEPROM chip. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License. */ -#include #include #include #include #include -#include -#include #include -#include +#include -/* Addresses to scan */ -/* No address scanned by default, as this could corrupt standard EEPROMS. */ +/* Do not scan - the MAX6875 access method will write to some EEPROM chips */ static unsigned short normal_i2c[] = {I2C_CLIENT_END}; -static unsigned int normal_isa[] = {I2C_CLIENT_ISA_END}; /* Insmod parameters */ -SENSORS_INSMOD_1(max6875); - -/* this param will prevent 'accidental' writes to the eeprom */ -static int allow_write = 0; -module_param(allow_write, int, 0); -MODULE_PARM_DESC(allow_write, - "Enable write access:\n" - "*0: Read only\n" - " 1: Read/Write access"); +I2C_CLIENT_INSMOD_1(max6875); /* The MAX6875 can only read/write 16 bytes at a time */ #define SLICE_SIZE 16 #define SLICE_BITS 4 -/* CONFIG EEPROM is at addresses 0x8000 - 0x8045, registers are at 0 - 0x45 */ -#define CONFIG_EEPROM_BASE 0x8000 -#define CONFIG_EEPROM_SIZE 0x0046 -#define CONFIG_EEPROM_SLICES 5 - /* USER EEPROM is at addresses 0x8100 - 0x82FF */ #define USER_EEPROM_BASE 0x8100 #define USER_EEPROM_SIZE 0x0200 #define USER_EEPROM_SLICES 32 /* MAX6875 commands */ -#define MAX6875_CMD_BLOCK_WRITE 0x83 -#define MAX6875_CMD_BLOCK_READ 0x84 -#define MAX6875_CMD_REBOOT 0x88 - -enum max6875_area_type { - max6875_register_config=0, - max6875_eeprom_config, - max6875_eeprom_user, - max6857_max -}; - -struct eeprom_block { - enum max6875_area_type type; - u8 slices; - u32 size; - u32 valid; - u32 base; - unsigned long *updated; - u8 *data; -}; +#define MAX6875_CMD_BLK_READ 0x84 /* Each client has this additional data */ struct max6875_data { struct i2c_client client; struct semaphore update_lock; - struct eeprom_block blocks[max6857_max]; - /* the above structs point into the arrays below */ - u8 data[USER_EEPROM_SIZE + (CONFIG_EEPROM_SIZE*2)]; - unsigned long last_updated[USER_EEPROM_SLICES + (CONFIG_EEPROM_SLICES*2)]; + + u32 valid; + u8 data[USER_EEPROM_SIZE]; + unsigned long last_updated[USER_EEPROM_SLICES]; }; static int max6875_attach_adapter(struct i2c_adapter *adapter); @@ -111,337 +74,160 @@ static struct i2c_driver max6875_driver = { .detach_client = max6875_detach_client, }; -static int max6875_update_slice(struct i2c_client *client, - struct eeprom_block *blk, - int slice) +static void max6875_update_slice(struct i2c_client *client, int slice) { struct max6875_data *data = i2c_get_clientdata(client); - int i, j, addr, count; - u8 rdbuf[SLICE_SIZE]; - int retval = 0; + int i, j, addr; + u8 *buf; - if (slice >= blk->slices) - return -1; + if (slice >= USER_EEPROM_SLICES) + return; down(&data->update_lock); - if (!(blk->valid & (1 << slice)) || - (jiffies - blk->updated[slice] > 300 * HZ) || - (jiffies < blk->updated[slice])) { - dev_dbg(&client->dev, "Starting eeprom update, slice %u, base %u\n", - slice, blk->base); + buf = &data->data[slice << SLICE_BITS]; - addr = blk->base + (slice << SLICE_BITS); - count = blk->size - (slice << SLICE_BITS); - if (count > SLICE_SIZE) { - count = SLICE_SIZE; + if (!(data->valid & (1 << slice)) || + time_after(jiffies, data->last_updated[slice])) { + + dev_dbg(&client->dev, "Starting update of slice %u\n", slice); + + data->valid &= ~(1 << slice); + + addr = USER_EEPROM_BASE + (slice << SLICE_BITS); + + /* select the eeprom address */ + if (i2c_smbus_write_byte_data(client, addr >> 8, addr & 0xFF)) { + dev_err(&client->dev, "address set failed\n"); + goto exit_up; } - /* Preset the read address */ - if (addr < 0x100) { - /* select the register */ - if (i2c_smbus_write_byte(client, addr & 0xFF)) { - dev_dbg(&client->dev, "max6875 register select has failed!\n"); - retval = -1; - goto exit; + if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + if (i2c_smbus_read_i2c_block_data(client, + MAX6875_CMD_BLK_READ, + buf) != SLICE_SIZE) { + goto exit_up; } } else { - /* select the eeprom */ - if (i2c_smbus_write_byte_data(client, addr >> 8, addr & 0xFF)) { - dev_dbg(&client->dev, "max6875 address set has failed!\n"); - retval = -1; - goto exit; - } - } - - if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { - if (i2c_smbus_read_i2c_block_data(client, MAX6875_CMD_BLOCK_READ, - rdbuf) != SLICE_SIZE) - { - retval = -1; - goto exit; - } - - memcpy(&blk->data[slice << SLICE_BITS], rdbuf, count); - } else { - for (i = 0; i < count; i++) { + for (i = 0; i < SLICE_SIZE; i++) { j = i2c_smbus_read_byte(client); - if (j < 0) - { - retval = -1; - goto exit; + if (j < 0) { + goto exit_up; } - blk->data[(slice << SLICE_BITS) + i] = (u8) j; + buf[i] = j; } } - blk->updated[slice] = jiffies; - blk->valid |= (1 << slice); + data->last_updated[slice] = jiffies; + data->valid |= (1 << slice); } - exit: +exit_up: up(&data->update_lock); - return retval; } -static ssize_t max6875_read(struct kobject *kobj, char *buf, loff_t off, size_t count, - enum max6875_area_type area_type) +static ssize_t max6875_read(struct kobject *kobj, char *buf, loff_t off, + size_t count) { - struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct i2c_client *client = kobj_to_i2c_client(kobj); struct max6875_data *data = i2c_get_clientdata(client); - struct eeprom_block *blk; - int slice; + int slice, max_slice; - blk = &data->blocks[area_type]; - - if (off > blk->size) + if (off > USER_EEPROM_SIZE) return 0; - if (off + count > blk->size) - count = blk->size - off; - /* Only refresh slices which contain requested bytes */ - for (slice = (off >> SLICE_BITS); slice <= ((off + count - 1) >> SLICE_BITS); slice++) - max6875_update_slice(client, blk, slice); + if (off + count > USER_EEPROM_SIZE) + count = USER_EEPROM_SIZE - off; - memcpy(buf, &blk->data[off], count); + /* refresh slices which contain requested bytes */ + max_slice = (off + count - 1) >> SLICE_BITS; + for (slice = (off >> SLICE_BITS); slice <= max_slice; slice++) + max6875_update_slice(client, slice); + + memcpy(buf, &data->data[off], count); return count; } -static ssize_t max6875_user_read(struct kobject *kobj, char *buf, loff_t off, size_t count) -{ - return max6875_read(kobj, buf, off, count, max6875_eeprom_user); -} - -static ssize_t max6875_config_read(struct kobject *kobj, char *buf, loff_t off, size_t count) -{ - return max6875_read(kobj, buf, off, count, max6875_eeprom_config); -} - -static ssize_t max6875_cfgreg_read(struct kobject *kobj, char *buf, loff_t off, size_t count) -{ - return max6875_read(kobj, buf, off, count, max6875_register_config); -} - - -static ssize_t max6875_write(struct kobject *kobj, char *buf, loff_t off, size_t count, - enum max6875_area_type area_type) -{ - struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); - struct max6875_data *data = i2c_get_clientdata(client); - struct eeprom_block *blk; - int slice, addr, retval; - ssize_t sent = 0; - - blk = &data->blocks[area_type]; - - if (off > blk->size) - return 0; - if ((off + count) > blk->size) - count = blk->size - off; - - if (down_interruptible(&data->update_lock)) - return -EAGAIN; - - /* writing to a register is done with i2c_smbus_write_byte_data() */ - if (blk->type == max6875_register_config) { - for (sent = 0; sent < count; sent++) { - addr = off + sent; - if (addr == 0x44) - continue; - - retval = i2c_smbus_write_byte_data(client, addr, buf[sent]); - } - } else { - int cmd, val; - - /* We are writing to EEPROM */ - for (sent = 0; sent < count; sent++) { - addr = blk->base + off + sent; - cmd = addr >> 8; - val = (addr & 0xff) | (buf[sent] << 8); // reversed - - if (addr == 0x8044) - continue; - - retval = i2c_smbus_write_word_data(client, cmd, val); - - if (retval) { - goto error_exit; - } - - /* A write takes up to 11 ms */ - msleep(11); - } - } - - /* Invalidate the scratch buffer */ - for (slice = (off >> SLICE_BITS); slice <= ((off + count - 1) >> SLICE_BITS); slice++) - blk->valid &= ~(1 << slice); - - error_exit: - up(&data->update_lock); - - return sent; -} - -static ssize_t max6875_user_write(struct kobject *kobj, char *buf, loff_t off, size_t count) -{ - return max6875_write(kobj, buf, off, count, max6875_eeprom_user); -} - -static ssize_t max6875_config_write(struct kobject *kobj, char *buf, loff_t off, size_t count) -{ - return max6875_write(kobj, buf, off, count, max6875_eeprom_config); -} - -static ssize_t max6875_cfgreg_write(struct kobject *kobj, char *buf, loff_t off, size_t count) -{ - return max6875_write(kobj, buf, off, count, max6875_register_config); -} - static struct bin_attribute user_eeprom_attr = { .attr = { - .name = "eeprom_user", - .mode = S_IRUGO | S_IWUSR | S_IWGRP, + .name = "eeprom", + .mode = S_IRUGO, .owner = THIS_MODULE, }, - .size = USER_EEPROM_SIZE, - .read = max6875_user_read, - .write = max6875_user_write, -}; - -static struct bin_attribute config_eeprom_attr = { - .attr = { - .name = "eeprom_config", - .mode = S_IRUGO | S_IWUSR, - .owner = THIS_MODULE, - }, - .size = CONFIG_EEPROM_SIZE, - .read = max6875_config_read, - .write = max6875_config_write, -}; - -static struct bin_attribute config_register_attr = { - .attr = { - .name = "reg_config", - .mode = S_IRUGO | S_IWUSR, - .owner = THIS_MODULE, - }, - .size = CONFIG_EEPROM_SIZE, - .read = max6875_cfgreg_read, - .write = max6875_cfgreg_write, + .size = USER_EEPROM_SIZE, + .read = max6875_read, }; static int max6875_attach_adapter(struct i2c_adapter *adapter) { - return i2c_detect(adapter, &addr_data, max6875_detect); + return i2c_probe(adapter, &addr_data, max6875_detect); } -/* This function is called by i2c_detect */ +/* This function is called by i2c_probe */ static int max6875_detect(struct i2c_adapter *adapter, int address, int kind) { - struct i2c_client *new_client; + struct i2c_client *real_client; + struct i2c_client *fake_client; struct max6875_data *data; int err = 0; - /* Prevent 24RF08 corruption (in case of user error) */ - if (kind < 0) - i2c_smbus_xfer(adapter, address, 0, 0, 0, - I2C_SMBUS_QUICK, NULL); + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA + | I2C_FUNC_SMBUS_READ_BYTE)) + return 0; - /* There are three ways we can read the EEPROM data: - (1) I2C block reads (faster, but unsupported by most adapters) - (2) Consecutive byte reads (100% overhead) - (3) Regular byte data reads (200% overhead) - The third method is not implemented by this driver because all - known adapters support at least the second. */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA | - I2C_FUNC_SMBUS_BYTE | - I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) - goto exit; + /* Only check even addresses */ + if (address & 1) + return 0; - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access eeprom_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct max6875_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } + if (!(data = kmalloc(sizeof(struct max6875_data), GFP_KERNEL))) + return -ENOMEM; memset(data, 0, sizeof(struct max6875_data)); - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &max6875_driver; - new_client->flags = 0; + /* A fake client is created on the odd address */ + if (!(fake_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) { + err = -ENOMEM; + goto exit_kfree1; + } + memset(fake_client, 0, sizeof(struct i2c_client)); - /* Setup the user section */ - data->blocks[max6875_eeprom_user].type = max6875_eeprom_user; - data->blocks[max6875_eeprom_user].slices = USER_EEPROM_SLICES; - data->blocks[max6875_eeprom_user].size = USER_EEPROM_SIZE; - data->blocks[max6875_eeprom_user].base = USER_EEPROM_BASE; - data->blocks[max6875_eeprom_user].data = data->data; - data->blocks[max6875_eeprom_user].updated = data->last_updated; - - /* Setup the config section */ - data->blocks[max6875_eeprom_config].type = max6875_eeprom_config; - data->blocks[max6875_eeprom_config].slices = CONFIG_EEPROM_SLICES; - data->blocks[max6875_eeprom_config].size = CONFIG_EEPROM_SIZE; - data->blocks[max6875_eeprom_config].base = CONFIG_EEPROM_BASE; - data->blocks[max6875_eeprom_config].data = &data->data[USER_EEPROM_SIZE]; - data->blocks[max6875_eeprom_config].updated = &data->last_updated[USER_EEPROM_SLICES]; - - /* Setup the register section */ - data->blocks[max6875_register_config].type = max6875_register_config; - data->blocks[max6875_register_config].slices = CONFIG_EEPROM_SLICES; - data->blocks[max6875_register_config].size = CONFIG_EEPROM_SIZE; - data->blocks[max6875_register_config].base = 0; - data->blocks[max6875_register_config].data = &data->data[USER_EEPROM_SIZE+CONFIG_EEPROM_SIZE]; - data->blocks[max6875_register_config].updated = &data->last_updated[USER_EEPROM_SLICES+CONFIG_EEPROM_SLICES]; - - /* Init the data */ - memset(data->data, 0xff, sizeof(data->data)); - - /* Fill in the remaining client fields */ - strlcpy(new_client->name, "max6875", I2C_NAME_SIZE); + /* Init real i2c_client */ + real_client = &data->client; + i2c_set_clientdata(real_client, data); + real_client->addr = address; + real_client->adapter = adapter; + real_client->driver = &max6875_driver; + real_client->flags = 0; + strlcpy(real_client->name, "max6875", I2C_NAME_SIZE); init_MUTEX(&data->update_lock); - /* Verify that the chip is really what we think it is */ - if ((max6875_update_slice(new_client, &data->blocks[max6875_eeprom_config], 4) < 0) || - (max6875_update_slice(new_client, &data->blocks[max6875_register_config], 4) < 0)) - goto exit_kfree; + /* Init fake client data */ + /* set the client data to the i2c_client so that it will get freed */ + i2c_set_clientdata(fake_client, fake_client); + fake_client->addr = address | 1; + fake_client->adapter = adapter; + fake_client->driver = &max6875_driver; + fake_client->flags = 0; + strlcpy(fake_client->name, "max6875 subclient", I2C_NAME_SIZE); - /* 0x41,0x42 must be zero and 0x40 must match in eeprom and registers */ - if ((data->blocks[max6875_eeprom_config].data[0x41] != 0) || - (data->blocks[max6875_eeprom_config].data[0x42] != 0) || - (data->blocks[max6875_register_config].data[0x41] != 0) || - (data->blocks[max6875_register_config].data[0x42] != 0) || - (data->blocks[max6875_eeprom_config].data[0x40] != - data->blocks[max6875_register_config].data[0x40])) - goto exit_kfree; + /* Prevent 24RF08 corruption (in case of user error) */ + i2c_smbus_write_quick(real_client, 0); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_kfree; + if ((err = i2c_attach_client(real_client)) != 0) + goto exit_kfree2; - /* create the sysfs eeprom files with the correct permissions */ - if (allow_write == 0) { - user_eeprom_attr.attr.mode &= ~S_IWUGO; - user_eeprom_attr.write = NULL; - config_eeprom_attr.attr.mode &= ~S_IWUGO; - config_eeprom_attr.write = NULL; - config_register_attr.attr.mode &= ~S_IWUGO; - config_register_attr.write = NULL; - } - sysfs_create_bin_file(&new_client->dev.kobj, &user_eeprom_attr); - sysfs_create_bin_file(&new_client->dev.kobj, &config_eeprom_attr); - sysfs_create_bin_file(&new_client->dev.kobj, &config_register_attr); + if ((err = i2c_attach_client(fake_client)) != 0) + goto exit_detach; + + sysfs_create_bin_file(&real_client->dev.kobj, &user_eeprom_attr); return 0; -exit_kfree: +exit_detach: + i2c_detach_client(real_client); +exit_kfree2: + kfree(fake_client); +exit_kfree1: kfree(data); -exit: return err; } @@ -450,13 +236,9 @@ static int max6875_detach_client(struct i2c_client *client) int err; err = i2c_detach_client(client); - if (err) { - dev_err(&client->dev, "Client deregistration failed, client not detached.\n"); + if (err) return err; - } - kfree(i2c_get_clientdata(client)); - return 0; } diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c index 9f3ad45daae2..225577fdda4d 100644 --- a/drivers/i2c/chips/pca9539.c +++ b/drivers/i2c/chips/pca9539.c @@ -13,14 +13,12 @@ #include #include #include -#include /* Addresses to scan */ static unsigned short normal_i2c[] = {0x74, 0x75, 0x76, 0x77, I2C_CLIENT_END}; -static unsigned int normal_isa[] = {I2C_CLIENT_ISA_END}; /* Insmod parameters */ -SENSORS_INSMOD_1(pca9539); +I2C_CLIENT_INSMOD_1(pca9539); enum pca9539_cmd { @@ -109,10 +107,10 @@ static struct attribute_group pca9539_defattr_group = { static int pca9539_attach_adapter(struct i2c_adapter *adapter) { - return i2c_detect(adapter, &addr_data, pca9539_detect); + return i2c_probe(adapter, &addr_data, pca9539_detect); } -/* This function is called by i2c_detect */ +/* This function is called by i2c_probe */ static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; @@ -164,10 +162,8 @@ static int pca9539_detach_client(struct i2c_client *client) { int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed.\n"); + if ((err = i2c_detach_client(client))) return err; - } kfree(i2c_get_clientdata(client)); return 0; diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c index cfcf64654080..6525743ff9fd 100644 --- a/drivers/i2c/chips/pcf8574.c +++ b/drivers/i2c/chips/pcf8574.c @@ -39,16 +39,14 @@ #include #include #include -#include /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* Insmod parameters */ -SENSORS_INSMOD_2(pcf8574, pcf8574a); +I2C_CLIENT_INSMOD_2(pcf8574, pcf8574a); /* Initial values */ #define PCF8574_INIT 255 /* All outputs on (input mode) */ @@ -113,10 +111,10 @@ static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write); static int pcf8574_attach_adapter(struct i2c_adapter *adapter) { - return i2c_detect(adapter, &addr_data, pcf8574_detect); + return i2c_probe(adapter, &addr_data, pcf8574_detect); } -/* This function is called by i2c_detect */ +/* This function is called by i2c_probe */ int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; @@ -186,11 +184,8 @@ static int pcf8574_detach_client(struct i2c_client *client) { int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); + if ((err = i2c_detach_client(client))) return err; - } kfree(i2c_get_clientdata(client)); return 0; diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c index db812ade8564..80f1df9a4500 100644 --- a/drivers/i2c/chips/pcf8591.c +++ b/drivers/i2c/chips/pcf8591.c @@ -24,15 +24,13 @@ #include #include #include -#include /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; /* Insmod parameters */ -SENSORS_INSMOD_1(pcf8591); +I2C_CLIENT_INSMOD_1(pcf8591); static int input_mode; module_param(input_mode, int, 0); @@ -164,10 +162,10 @@ static DEVICE_ATTR(out0_enable, S_IWUSR | S_IRUGO, */ static int pcf8591_attach_adapter(struct i2c_adapter *adapter) { - return i2c_detect(adapter, &addr_data, pcf8591_detect); + return i2c_probe(adapter, &addr_data, pcf8591_detect); } -/* This function is called by i2c_detect */ +/* This function is called by i2c_probe */ int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; @@ -241,11 +239,8 @@ static int pcf8591_detach_client(struct i2c_client *client) { int err; - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); + if ((err = i2c_detach_client(client))) return err; - } kfree(i2c_get_clientdata(client)); return 0; diff --git a/drivers/i2c/chips/rtc8564.c b/drivers/i2c/chips/rtc8564.c index 588fc2261a91..0b5385c892b1 100644 --- a/drivers/i2c/chips/rtc8564.c +++ b/drivers/i2c/chips/rtc8564.c @@ -67,7 +67,6 @@ static struct i2c_client_address_data addr_data = { .normal_i2c = normal_addr, .probe = ignore, .ignore = ignore, - .force = ignore, }; static int rtc8564_read_mem(struct i2c_client *client, struct mem *mem); diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 4a9ead277596..dda472e5e8be 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -61,7 +61,7 @@ static int i2c_bus_resume(struct device * dev) return rc; } -static struct bus_type i2c_bus_type = { +struct bus_type i2c_bus_type = { .name = "i2c", .match = i2c_device_match, .suspend = i2c_bus_suspend, @@ -78,13 +78,13 @@ static int i2c_device_remove(struct device *dev) return 0; } -static void i2c_adapter_dev_release(struct device *dev) +void i2c_adapter_dev_release(struct device *dev) { struct i2c_adapter *adap = dev_to_i2c_adapter(dev); complete(&adap->dev_released); } -static struct device_driver i2c_adapter_driver = { +struct device_driver i2c_adapter_driver = { .name = "i2c_adapter", .bus = &i2c_bus_type, .probe = i2c_device_probe, @@ -97,7 +97,7 @@ static void i2c_adapter_class_dev_release(struct class_device *dev) complete(&adap->class_dev_released); } -static struct class i2c_adapter_class = { +struct class i2c_adapter_class = { .name = "i2c-adapter", .release = &i2c_adapter_class_dev_release, }; @@ -188,6 +188,8 @@ int i2c_add_adapter(struct i2c_adapter *adap) strlcpy(adap->class_dev.class_id, adap->dev.bus_id, BUS_ID_SIZE); class_device_register(&adap->class_dev); + dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name); + /* inform drivers of new adapters */ list_for_each(item,&drivers) { driver = list_entry(item, struct i2c_driver, list); @@ -196,8 +198,6 @@ int i2c_add_adapter(struct i2c_adapter *adap) driver->attach_adapter(adap); } - dev_dbg(&adap->dev, "registered as adapter #%d\n", adap->nr); - out_unlock: up(&core_lists); return res; @@ -220,8 +220,8 @@ int i2c_del_adapter(struct i2c_adapter *adap) break; } if (adap_from_list != adap) { - pr_debug("I2C: Attempting to delete an unregistered " - "adapter\n"); + pr_debug("i2c-core: attempting to delete unregistered " + "adapter [%s]\n", adap->name); res = -EINVAL; goto out_unlock; } @@ -230,9 +230,8 @@ int i2c_del_adapter(struct i2c_adapter *adap) driver = list_entry(item, struct i2c_driver, list); if (driver->detach_adapter) if ((res = driver->detach_adapter(adap))) { - dev_warn(&adap->dev, "can't detach adapter " - "while detaching driver %s: driver " - "not detached!\n", driver->name); + dev_err(&adap->dev, "detach_adapter failed " + "for driver [%s]\n", driver->name); goto out_unlock; } } @@ -247,9 +246,8 @@ int i2c_del_adapter(struct i2c_adapter *adap) * must be deleted, as this would cause invalid states. */ if ((res=client->driver->detach_client(client))) { - dev_err(&adap->dev, "adapter not " - "unregistered, because client at " - "address %02x can't be detached. ", + dev_err(&adap->dev, "detach_client failed for client " + "[%s] at address 0x%02x\n", client->name, client->addr); goto out_unlock; } @@ -270,7 +268,7 @@ int i2c_del_adapter(struct i2c_adapter *adap) /* free dynamically allocated bus id */ idr_remove(&i2c_adapter_idr, adap->nr); - dev_dbg(&adap->dev, "adapter unregistered\n"); + dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name); out_unlock: up(&core_lists); @@ -303,7 +301,7 @@ int i2c_add_driver(struct i2c_driver *driver) goto out_unlock; list_add_tail(&driver->list,&drivers); - pr_debug("i2c-core: driver %s registered.\n", driver->name); + pr_debug("i2c-core: driver [%s] registered\n", driver->name); /* now look for instances of driver on our adapters */ if (driver->flags & I2C_DF_NOTIFY) { @@ -331,21 +329,17 @@ int i2c_del_driver(struct i2c_driver *driver) /* Have a look at each adapter, if clients of this driver are still * attached. If so, detach them to be able to kill the driver * afterwards. - */ - pr_debug("i2c-core: unregister_driver - looking for clients.\n"); - /* removing clients does not depend on the notify flag, else + * + * Removing clients does not depend on the notify flag, else * invalid operation might (will!) result, when using stale client * pointers. */ list_for_each(item1,&adapters) { adap = list_entry(item1, struct i2c_adapter, list); - dev_dbg(&adap->dev, "examining adapter\n"); if (driver->detach_adapter) { if ((res = driver->detach_adapter(adap))) { - dev_warn(&adap->dev, "while unregistering " - "dummy driver %s, adapter could " - "not be detached properly; driver " - "not unloaded!",driver->name); + dev_err(&adap->dev, "detach_adapter failed " + "for driver [%s]\n", driver->name); goto out_unlock; } } else { @@ -353,16 +347,13 @@ int i2c_del_driver(struct i2c_driver *driver) client = list_entry(item2, struct i2c_client, list); if (client->driver != driver) continue; - pr_debug("i2c-core.o: detaching client %s:\n", client->name); + dev_dbg(&adap->dev, "detaching client [%s] " + "at 0x%02x\n", client->name, + client->addr); if ((res = driver->detach_client(client))) { - dev_err(&adap->dev, "while " - "unregistering driver " - "`%s', the client at " - "address %02x of " - "adapter could not " - "be detached; driver " - "not unloaded!", - driver->name, + dev_err(&adap->dev, "detach_client " + "failed for client [%s] at " + "0x%02x\n", client->name, client->addr); goto out_unlock; } @@ -372,7 +363,7 @@ int i2c_del_driver(struct i2c_driver *driver) driver_unregister(&driver->driver); list_del(&driver->list); - pr_debug("i2c-core: driver unregistered: %s\n", driver->name); + pr_debug("i2c-core: driver [%s] unregistered\n", driver->name); out_unlock: up(&core_lists); @@ -417,15 +408,12 @@ int i2c_attach_client(struct i2c_client *client) if (adapter->client_register) { if (adapter->client_register(client)) { - dev_warn(&adapter->dev, "warning: client_register " - "seems to have failed for client %02x\n", - client->addr); + dev_dbg(&adapter->dev, "client_register " + "failed for client [%s] at 0x%02x\n", + client->name, client->addr); } } - dev_dbg(&adapter->dev, "client [%s] registered to adapter\n", - client->name); - if (client->flags & I2C_CLIENT_ALLOW_USE) client->usage_count = 0; @@ -436,7 +424,8 @@ int i2c_attach_client(struct i2c_client *client) snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id), "%d-%04x", i2c_adapter_id(adapter), client->addr); - pr_debug("registering %s\n", client->dev.bus_id); + dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n", + client->name, client->dev.bus_id); device_register(&client->dev); device_create_file(&client->dev, &dev_attr_client_name); @@ -449,8 +438,12 @@ int i2c_detach_client(struct i2c_client *client) struct i2c_adapter *adapter = client->adapter; int res = 0; - if ((client->flags & I2C_CLIENT_ALLOW_USE) && (client->usage_count > 0)) + if ((client->flags & I2C_CLIENT_ALLOW_USE) + && (client->usage_count > 0)) { + dev_warn(&client->dev, "Client [%s] still busy, " + "can't detach\n", client->name); return -EBUSY; + } if (adapter->client_unregister) { res = adapter->client_unregister(client); @@ -669,98 +662,128 @@ int i2c_control(struct i2c_client *client, * Will not work for 10-bit addresses! * ---------------------------------------------------- */ +static int i2c_probe_address(struct i2c_adapter *adapter, int addr, int kind, + int (*found_proc) (struct i2c_adapter *, int, int)) +{ + int err; + + /* Make sure the address is valid */ + if (addr < 0x03 || addr > 0x77) { + dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n", + addr); + return -EINVAL; + } + + /* Skip if already in use */ + if (i2c_check_addr(adapter, addr)) + return 0; + + /* Make sure there is something at this address, unless forced */ + if (kind < 0) { + if (i2c_smbus_xfer(adapter, addr, 0, 0, 0, + I2C_SMBUS_QUICK, NULL) < 0) + return 0; + + /* prevent 24RF08 corruption */ + if ((addr & ~0x0f) == 0x50) + i2c_smbus_xfer(adapter, addr, 0, 0, 0, + I2C_SMBUS_QUICK, NULL); + } + + /* Finally call the custom detection function */ + err = found_proc(adapter, addr, kind); + + /* -ENODEV can be returned if there is a chip at the given address + but it isn't supported by this chip driver. We catch it here as + this isn't an error. */ + return (err == -ENODEV) ? 0 : err; +} + int i2c_probe(struct i2c_adapter *adapter, struct i2c_client_address_data *address_data, int (*found_proc) (struct i2c_adapter *, int, int)) { - int addr,i,found,err; + int i, err; int adap_id = i2c_adapter_id(adapter); /* Forget it if we can't probe using SMBUS_QUICK */ if (! i2c_check_functionality(adapter,I2C_FUNC_SMBUS_QUICK)) return -1; - for (addr = 0x00; addr <= 0x7f; addr++) { + /* Force entries are done first, and are not affected by ignore + entries */ + if (address_data->forces) { + unsigned short **forces = address_data->forces; + int kind; - /* Skip if already in use */ - if (i2c_check_addr(adapter,addr)) - continue; - - /* If it is in one of the force entries, we don't do any detection - at all */ - found = 0; - - for (i = 0; !found && (address_data->force[i] != I2C_CLIENT_END); i += 2) { - if (((adap_id == address_data->force[i]) || - (address_data->force[i] == ANY_I2C_BUS)) && - (addr == address_data->force[i+1])) { - dev_dbg(&adapter->dev, "found force parameter for adapter %d, addr %04x\n", - adap_id, addr); - if ((err = found_proc(adapter,addr,0))) - return err; - found = 1; + for (kind = 0; forces[kind]; kind++) { + for (i = 0; forces[kind][i] != I2C_CLIENT_END; + i += 2) { + if (forces[kind][i] == adap_id + || forces[kind][i] == ANY_I2C_BUS) { + dev_dbg(&adapter->dev, "found force " + "parameter for adapter %d, " + "addr 0x%02x, kind %d\n", + adap_id, forces[kind][i + 1], + kind); + err = i2c_probe_address(adapter, + forces[kind][i + 1], + kind, found_proc); + if (err) + return err; + } } } - if (found) - continue; - - /* If this address is in one of the ignores, we can forget about - it right now */ - for (i = 0; - !found && (address_data->ignore[i] != I2C_CLIENT_END); - i += 2) { - if (((adap_id == address_data->ignore[i]) || - ((address_data->ignore[i] == ANY_I2C_BUS))) && - (addr == address_data->ignore[i+1])) { - dev_dbg(&adapter->dev, "found ignore parameter for adapter %d, " - "addr %04x\n", adap_id ,addr); - found = 1; - } - } - if (found) - continue; - - /* Now, we will do a detection, but only if it is in the normal or - probe entries */ - for (i = 0; - !found && (address_data->normal_i2c[i] != I2C_CLIENT_END); - i += 1) { - if (addr == address_data->normal_i2c[i]) { - found = 1; - dev_dbg(&adapter->dev, "found normal i2c entry for adapter %d, " - "addr %02x\n", adap_id, addr); - } - } - - for (i = 0; - !found && (address_data->probe[i] != I2C_CLIENT_END); - i += 2) { - if (((adap_id == address_data->probe[i]) || - ((address_data->probe[i] == ANY_I2C_BUS))) && - (addr == address_data->probe[i+1])) { - found = 1; - dev_dbg(&adapter->dev, "found probe parameter for adapter %d, " - "addr %04x\n", adap_id,addr); - } - } - if (!found) - continue; - - /* OK, so we really should examine this address. First check - whether there is some client here at all! */ - if (i2c_smbus_xfer(adapter,addr,0,0,0,I2C_SMBUS_QUICK,NULL) >= 0) - if ((err = found_proc(adapter,addr,-1))) - return err; } - return 0; -} -/* - * return id number for a specific adapter - */ -int i2c_adapter_id(struct i2c_adapter *adap) -{ - return adap->nr; + /* Probe entries are done second, and are not affected by ignore + entries either */ + for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) { + if (address_data->probe[i] == adap_id + || address_data->probe[i] == ANY_I2C_BUS) { + dev_dbg(&adapter->dev, "found probe parameter for " + "adapter %d, addr 0x%02x\n", adap_id, + address_data->probe[i + 1]); + err = i2c_probe_address(adapter, + address_data->probe[i + 1], + -1, found_proc); + if (err) + return err; + } + } + + /* Normal entries are done last, unless shadowed by an ignore entry */ + for (i = 0; address_data->normal_i2c[i] != I2C_CLIENT_END; i += 1) { + int j, ignore; + + ignore = 0; + for (j = 0; address_data->ignore[j] != I2C_CLIENT_END; + j += 2) { + if ((address_data->ignore[j] == adap_id || + address_data->ignore[j] == ANY_I2C_BUS) + && address_data->ignore[j + 1] + == address_data->normal_i2c[i]) { + dev_dbg(&adapter->dev, "found ignore " + "parameter for adapter %d, " + "addr 0x%02x\n", adap_id, + address_data->ignore[j + 1]); + } + ignore = 1; + break; + } + if (ignore) + continue; + + dev_dbg(&adapter->dev, "found normal entry for adapter %d, " + "addr 0x%02x\n", adap_id, + address_data->normal_i2c[i]); + err = i2c_probe_address(adapter, address_data->normal_i2c[i], + -1, found_proc); + if (err) + return err; + } + + return 0; } struct i2c_adapter* i2c_get_adapter(int id) @@ -1171,6 +1194,12 @@ s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags, } +/* Next four are needed by i2c-isa */ +EXPORT_SYMBOL_GPL(i2c_adapter_dev_release); +EXPORT_SYMBOL_GPL(i2c_adapter_driver); +EXPORT_SYMBOL_GPL(i2c_adapter_class); +EXPORT_SYMBOL_GPL(i2c_bus_type); + EXPORT_SYMBOL(i2c_add_adapter); EXPORT_SYMBOL(i2c_del_adapter); EXPORT_SYMBOL(i2c_add_driver); @@ -1186,7 +1215,6 @@ EXPORT_SYMBOL(i2c_master_send); EXPORT_SYMBOL(i2c_master_recv); EXPORT_SYMBOL(i2c_control); EXPORT_SYMBOL(i2c_transfer); -EXPORT_SYMBOL(i2c_adapter_id); EXPORT_SYMBOL(i2c_get_adapter); EXPORT_SYMBOL(i2c_put_adapter); EXPORT_SYMBOL(i2c_probe); diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index bc5d557e5dd9..aa7a4fadef64 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -434,7 +434,8 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap) devfs_mk_cdev(MKDEV(I2C_MAJOR, i2c_dev->minor), S_IFCHR|S_IRUSR|S_IWUSR, "i2c/%d", i2c_dev->minor); - dev_dbg(&adap->dev, "Registered as minor %d\n", i2c_dev->minor); + pr_debug("i2c-dev: adapter [%s] registered as minor %d\n", + adap->name, i2c_dev->minor); /* register this i2c device with the driver core */ i2c_dev->adap = adap; @@ -471,7 +472,7 @@ static int i2cdev_detach_adapter(struct i2c_adapter *adap) wait_for_completion(&i2c_dev->released); kfree(i2c_dev); - dev_dbg(&adap->dev, "Adapter unregistered\n"); + pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name); return 0; } diff --git a/drivers/i2c/i2c-sensor-detect.c b/drivers/i2c/i2c-sensor-detect.c deleted file mode 100644 index f99a8161a9f1..000000000000 --- a/drivers/i2c/i2c-sensor-detect.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - i2c-sensor-detect.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 1998 - 2001 Frodo Looijaard and - Mark D. Studebaker - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include -#include -#include -#include - -static unsigned short empty[] = {I2C_CLIENT_END}; -static unsigned int empty_isa[] = {I2C_CLIENT_ISA_END}; - -/* Very inefficient for ISA detects, and won't work for 10-bit addresses! */ -int i2c_detect(struct i2c_adapter *adapter, - struct i2c_address_data *address_data, - int (*found_proc) (struct i2c_adapter *, int, int)) -{ - int addr, i, found, j, err; - struct i2c_force_data *this_force; - int is_isa = i2c_is_isa_adapter(adapter); - int adapter_id = - is_isa ? ANY_I2C_ISA_BUS : i2c_adapter_id(adapter); - unsigned short *normal_i2c; - unsigned int *normal_isa; - unsigned short *probe; - unsigned short *ignore; - - /* Forget it if we can't probe using SMBUS_QUICK */ - if ((!is_isa) && - !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) - return -1; - - /* Use default "empty" list if the adapter doesn't specify any */ - normal_i2c = probe = ignore = empty; - normal_isa = empty_isa; - if (address_data->normal_i2c) - normal_i2c = address_data->normal_i2c; - if (address_data->normal_isa) - normal_isa = address_data->normal_isa; - if (address_data->probe) - probe = address_data->probe; - if (address_data->ignore) - ignore = address_data->ignore; - - for (addr = 0x00; addr <= (is_isa ? 0xffff : 0x7f); addr++) { - if (!is_isa && i2c_check_addr(adapter, addr)) - continue; - - /* If it is in one of the force entries, we don't do any - detection at all */ - found = 0; - for (i = 0; !found && (this_force = address_data->forces + i, this_force->force); i++) { - for (j = 0; !found && (this_force->force[j] != I2C_CLIENT_END); j += 2) { - if ( ((adapter_id == this_force->force[j]) || - ((this_force->force[j] == ANY_I2C_BUS) && !is_isa)) && - (addr == this_force->force[j + 1]) ) { - dev_dbg(&adapter->dev, "found force parameter for adapter %d, addr %04x\n", adapter_id, addr); - if ((err = found_proc(adapter, addr, this_force->kind))) - return err; - found = 1; - } - } - } - if (found) - continue; - - /* If this address is in one of the ignores, we can forget about it - right now */ - for (i = 0; !found && (ignore[i] != I2C_CLIENT_END); i += 2) { - if ( ((adapter_id == ignore[i]) || - ((ignore[i] == ANY_I2C_BUS) && - !is_isa)) && - (addr == ignore[i + 1])) { - dev_dbg(&adapter->dev, "found ignore parameter for adapter %d, addr %04x\n", adapter_id, addr); - found = 1; - } - } - if (found) - continue; - - /* Now, we will do a detection, but only if it is in the normal or - probe entries */ - if (is_isa) { - for (i = 0; !found && (normal_isa[i] != I2C_CLIENT_ISA_END); i += 1) { - if (addr == normal_isa[i]) { - dev_dbg(&adapter->dev, "found normal isa entry for adapter %d, addr %04x\n", adapter_id, addr); - found = 1; - } - } - } else { - for (i = 0; !found && (normal_i2c[i] != I2C_CLIENT_END); i += 1) { - if (addr == normal_i2c[i]) { - found = 1; - dev_dbg(&adapter->dev, "found normal i2c entry for adapter %d, addr %02x\n", adapter_id, addr); - } - } - } - - for (i = 0; - !found && (probe[i] != I2C_CLIENT_END); - i += 2) { - if (((adapter_id == probe[i]) || - ((probe[i] == ANY_I2C_BUS) && !is_isa)) - && (addr == probe[i + 1])) { - dev_dbg(&adapter->dev, "found probe parameter for adapter %d, addr %04x\n", adapter_id, addr); - found = 1; - } - } - if (!found) - continue; - - /* OK, so we really should examine this address. First check - whether there is some client here at all! */ - if (is_isa || - (i2c_smbus_xfer (adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) >= 0)) - if ((err = found_proc(adapter, addr, -1))) - return err; - } - return 0; -} - -EXPORT_SYMBOL(i2c_detect); - -MODULE_AUTHOR("Frodo Looijaard , " - "Rudolf Marek "); - -MODULE_DESCRIPTION("i2c-sensor driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/i2c-sensor-vid.c b/drivers/i2c/i2c-sensor-vid.c deleted file mode 100644 index 922e22f054bb..000000000000 --- a/drivers/i2c/i2c-sensor-vid.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - i2c-sensor-vid.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - - Copyright (c) 2004 Rudolf Marek - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include -#include -#include - -struct vrm_model { - u8 vendor; - u8 eff_family; - u8 eff_model; - int vrm_type; -}; - -#define ANY 0xFF - -#ifdef CONFIG_X86 - -static struct vrm_model vrm_models[] = { - {X86_VENDOR_AMD, 0x6, ANY, 90}, /* Athlon Duron etc */ - {X86_VENDOR_AMD, 0xF, ANY, 24}, /* Athlon 64, Opteron */ - {X86_VENDOR_INTEL, 0x6, 0x9, 85}, /* 0.13um too */ - {X86_VENDOR_INTEL, 0x6, 0xB, 85}, /* 0xB Tualatin */ - {X86_VENDOR_INTEL, 0x6, ANY, 82}, /* any P6 */ - {X86_VENDOR_INTEL, 0x7, ANY, 0}, /* Itanium */ - {X86_VENDOR_INTEL, 0xF, 0x3, 100}, /* P4 Prescott */ - {X86_VENDOR_INTEL, 0xF, ANY, 90}, /* P4 before Prescott */ - {X86_VENDOR_INTEL, 0x10,ANY, 0}, /* Itanium 2 */ - {X86_VENDOR_UNKNOWN, ANY, ANY, 0} /* stop here */ - }; - -static int find_vrm(u8 eff_family, u8 eff_model, u8 vendor) -{ - int i = 0; - - while (vrm_models[i].vendor!=X86_VENDOR_UNKNOWN) { - if (vrm_models[i].vendor==vendor) - if ((vrm_models[i].eff_family==eff_family)&& \ - ((vrm_models[i].eff_model==eff_model)|| \ - (vrm_models[i].eff_model==ANY))) - return vrm_models[i].vrm_type; - i++; - } - - return 0; -} - -int i2c_which_vrm(void) -{ - struct cpuinfo_x86 *c = cpu_data; - u32 eax; - u8 eff_family, eff_model; - int vrm_ret; - - if (c->x86 < 6) return 0; /* any CPU with familly lower than 6 - dont have VID and/or CPUID */ - eax = cpuid_eax(1); - eff_family = ((eax & 0x00000F00)>>8); - eff_model = ((eax & 0x000000F0)>>4); - if (eff_family == 0xF) { /* use extended model & family */ - eff_family += ((eax & 0x00F00000)>>20); - eff_model += ((eax & 0x000F0000)>>16)<<4; - } - vrm_ret = find_vrm(eff_family,eff_model,c->x86_vendor); - if (vrm_ret == 0) - printk(KERN_INFO "i2c-sensor.o: Unknown VRM version of your" - " x86 CPU\n"); - return vrm_ret; -} - -/* and now for something completely different for Non-x86 world*/ -#else -int i2c_which_vrm(void) -{ - printk(KERN_INFO "i2c-sensor.o: Unknown VRM version of your CPU\n"); - return 0; -} -#endif - -EXPORT_SYMBOL(i2c_which_vrm); diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c index 36074e6eeebb..6b1ab875333b 100644 --- a/drivers/ieee1394/pcilynx.c +++ b/drivers/ieee1394/pcilynx.c @@ -1464,26 +1464,6 @@ static int __devinit add_card(struct pci_dev *dev, { 0x50, I2C_M_RD, 20, (unsigned char*) lynx->bus_info_block } }; - -#ifdef CONFIG_IEEE1394_VERBOSEDEBUG - union i2c_smbus_data data; - - if (i2c_smbus_xfer(i2c_ad, 80, 0, I2C_SMBUS_WRITE, 0, I2C_SMBUS_BYTE,NULL)) - PRINT(KERN_ERR, lynx->id,"eeprom read start has failed"); - else - { - u16 addr; - for (addr=0x00; addr < 0x100; addr++) { - if (i2c_smbus_xfer(i2c_ad, 80, 0, I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE,& data)) { - PRINT(KERN_ERR, lynx->id, "unable to read i2c %x", addr); - break; - } - else - PRINT(KERN_DEBUG, lynx->id,"got serial eeprom data at %x: %x",addr, data.byte); - } - } -#endif - /* we use i2c_transfer, because i2c_smbus_read_block_data does not work properly and we do it more efficiently in one transaction rather then using several reads */ if (i2c_transfer(i2c_ad, msg, 2) < 0) { diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c index 781f23f0cbcc..6284894505c6 100644 --- a/drivers/media/common/saa7146_i2c.c +++ b/drivers/media/common/saa7146_i2c.c @@ -387,8 +387,6 @@ static int saa7146_i2c_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, in /* exported algorithm data */ static struct i2c_algorithm saa7146_algo = { - .name = "saa7146 i2c algorithm", - .id = I2C_ALGO_SAA7146, .master_xfer = saa7146_i2c_xfer, .functionality = saa7146_i2c_func, }; @@ -412,7 +410,7 @@ int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c #endif i2c_adapter->algo = &saa7146_algo; i2c_adapter->algo_data = NULL; - i2c_adapter->id = I2C_ALGO_SAA7146; + i2c_adapter->id = I2C_HW_SAA7146; i2c_adapter->timeout = SAA7146_I2C_TIMEOUT; i2c_adapter->retries = SAA7146_I2C_RETRIES; } diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c index be4266d4ae91..56495cb6cd02 100644 --- a/drivers/media/dvb/b2c2/flexcop-i2c.c +++ b/drivers/media/dvb/b2c2/flexcop-i2c.c @@ -172,8 +172,6 @@ static u32 flexcop_i2c_func(struct i2c_adapter *adapter) } static struct i2c_algorithm flexcop_algo = { - .name = "FlexCop I2C algorithm", - .id = I2C_ALGO_BIT, .master_xfer = flexcop_master_xfer, .functionality = flexcop_i2c_func, }; @@ -192,7 +190,6 @@ int flexcop_i2c_init(struct flexcop_device *fc) fc->i2c_adap.class = I2C_CLASS_TV_DIGITAL; fc->i2c_adap.algo = &flexcop_algo; fc->i2c_adap.algo_data = NULL; - fc->i2c_adap.id = I2C_ALGO_BIT; if ((ret = i2c_add_adapter(&fc->i2c_adap)) < 0) return ret; diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index c3e1b661aae6..9e96a188f1e9 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -141,8 +141,6 @@ static u32 cxusb_i2c_func(struct i2c_adapter *adapter) } static struct i2c_algorithm cxusb_i2c_algo = { - .name = "Conexant USB I2C algorithm", - .id = I2C_ALGO_BIT, .master_xfer = cxusb_i2c_xfer, .functionality = cxusb_i2c_func, }; diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c index 9b9d6f8ee74e..00b946419b40 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-common.c +++ b/drivers/media/dvb/dvb-usb/dibusb-common.c @@ -156,8 +156,6 @@ static u32 dibusb_i2c_func(struct i2c_adapter *adapter) } struct i2c_algorithm dibusb_i2c_algo = { - .name = "DiBcom USB I2C algorithm", - .id = I2C_ALGO_BIT, .master_xfer = dibusb_i2c_xfer, .functionality = dibusb_i2c_func, }; diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c index 9a676afc1d6e..f70e0be0920a 100644 --- a/drivers/media/dvb/dvb-usb/digitv.c +++ b/drivers/media/dvb/dvb-usb/digitv.c @@ -77,8 +77,6 @@ static u32 digitv_i2c_func(struct i2c_adapter *adapter) } static struct i2c_algorithm digitv_i2c_algo = { - .name = "Nebula DigiTV USB I2C algorithm", - .id = I2C_ALGO_BIT, .master_xfer = digitv_i2c_xfer, .functionality = digitv_i2c_func, }; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c index 9f0a8d90d146..da970947dfc7 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c @@ -27,7 +27,6 @@ int dvb_usb_i2c_init(struct dvb_usb_device *d) #endif d->i2c_adap.algo = d->props.i2c_algo; d->i2c_adap.algo_data = NULL; - d->i2c_adap.id = I2C_ALGO_BIT; i2c_set_adapdata(&d->i2c_adap, d); diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c index 706e0bcb5ede..85b437bbddcd 100644 --- a/drivers/media/dvb/pluto2/pluto2.c +++ b/drivers/media/dvb/pluto2/pluto2.c @@ -633,7 +633,6 @@ static int __devinit pluto2_probe(struct pci_dev *pdev, i2c_set_adapdata(&pluto->i2c_adap, pluto); strcpy(pluto->i2c_adap.name, DRIVER_NAME); pluto->i2c_adap.owner = THIS_MODULE; - pluto->i2c_adap.id = I2C_ALGO_BIT; pluto->i2c_adap.class = I2C_CLASS_TV_DIGITAL; pluto->i2c_adap.dev.parent = &pdev->dev; pluto->i2c_adap.algo_data = &pluto->i2c_bit; diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index aa43b5fcb8e7..7daf7b1598a0 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -1472,8 +1472,6 @@ static void frontend_init(struct ttusb* ttusb) static struct i2c_algorithm ttusb_dec_algo = { - .name = "ttusb dec i2c algorithm", - .id = I2C_ALGO_BIT, .master_xfer = master_xfer, .functionality = functionality, }; @@ -1525,7 +1523,6 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i #endif ttusb->i2c_adap.algo = &ttusb_dec_algo; ttusb->i2c_adap.algo_data = NULL; - ttusb->i2c_adap.id = I2C_ALGO_BIT; result = i2c_add_adapter(&ttusb->i2c_adap); if (result) { diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c index 48989eda2400..52e32f05d625 100644 --- a/drivers/media/video/adv7170.c +++ b/drivers/media/video/adv7170.c @@ -391,7 +391,6 @@ static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, .ignore = &ignore, - .force = &ignore, }; static struct i2c_driver i2c_driver_adv7170; diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c index f898b6586374..b5ed9544bdea 100644 --- a/drivers/media/video/adv7175.c +++ b/drivers/media/video/adv7175.c @@ -441,7 +441,6 @@ static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, .ignore = &ignore, - .force = &ignore, }; static struct i2c_driver i2c_driver_adv7175; diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c index 8733588f6db3..c6cfa7c48b04 100644 --- a/drivers/media/video/bt819.c +++ b/drivers/media/video/bt819.c @@ -507,7 +507,6 @@ static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, .ignore = &ignore, - .force = &ignore, }; static struct i2c_driver i2c_driver_bt819; diff --git a/drivers/media/video/bt832.c b/drivers/media/video/bt832.c index a070417e65e6..76c1b63ebdf2 100644 --- a/drivers/media/video/bt832.c +++ b/drivers/media/video/bt832.c @@ -188,7 +188,7 @@ static int bt832_probe(struct i2c_adapter *adap) if (adap->class & I2C_CLASS_TV_ANALOG) return i2c_probe(adap, &addr_data, bt832_attach); #else - if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_BT848)) + if (adap->id == I2C_HW_B_BT848) return i2c_probe(adap, &addr_data, bt832_attach); #endif return 0; @@ -241,7 +241,7 @@ static struct i2c_driver driver = { }; static struct i2c_client client_template = { - I2C_DEVNAME("bt832"), + .name = "bt832", .flags = I2C_CLIENT_ALLOW_USE, .driver = &driver, }; diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c index a5d529ccf3ad..c13d28658868 100644 --- a/drivers/media/video/bt856.c +++ b/drivers/media/video/bt856.c @@ -295,7 +295,6 @@ static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, .ignore = &ignore, - .force = &ignore, }; static struct i2c_driver i2c_driver_bt856; diff --git a/drivers/media/video/bttv-i2c.c b/drivers/media/video/bttv-i2c.c index 234a85563769..706dc48df962 100644 --- a/drivers/media/video/bttv-i2c.c +++ b/drivers/media/video/bttv-i2c.c @@ -109,7 +109,7 @@ static struct i2c_adapter bttv_i2c_adap_sw_template = { #ifdef I2C_CLASS_TV_ANALOG .class = I2C_CLASS_TV_ANALOG, #endif - I2C_DEVNAME("bt848"), + .name = "bt848", .id = I2C_HW_B_BT848, .client_register = attach_inform, }; @@ -270,8 +270,6 @@ static int bttv_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int } static struct i2c_algorithm bttv_algo = { - .name = "bt878", - .id = I2C_ALGO_BIT | I2C_HW_B_BT848 /* FIXME */, .master_xfer = bttv_i2c_xfer, .algo_control = algo_control, .functionality = functionality, @@ -282,8 +280,8 @@ static struct i2c_adapter bttv_i2c_adap_hw_template = { #ifdef I2C_CLASS_TV_ANALOG .class = I2C_CLASS_TV_ANALOG, #endif - I2C_DEVNAME("bt878"), - .id = I2C_ALGO_BIT | I2C_HW_B_BT848 /* FIXME */, + .name = "bt878", + .id = I2C_HW_B_BT848 /* FIXME */, .algo = &bttv_algo, .client_register = attach_inform, }; @@ -298,7 +296,7 @@ static int attach_inform(struct i2c_client *client) if (bttv_debug) printk(KERN_DEBUG "bttv%d: %s i2c attach [addr=0x%x,client=%s]\n", btv->c.nr,client->driver->name,client->addr, - i2c_clientname(client)); + client->name); if (!client->driver->command) return 0; @@ -326,7 +324,7 @@ void bttv_call_i2c_clients(struct bttv *btv, unsigned int cmd, void *arg) } static struct i2c_client bttv_i2c_client_template = { - I2C_DEVNAME("bttv internal"), + .name = "bttv internal", }; diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c index a628a55299c6..7f598039e025 100644 --- a/drivers/media/video/cx88/cx88-i2c.c +++ b/drivers/media/video/cx88/cx88-i2c.c @@ -95,7 +95,7 @@ static int attach_inform(struct i2c_client *client) struct cx88_core *core = i2c_get_adapdata(client->adapter); dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n", - client->driver->name,client->addr,i2c_clientname(client)); + client->driver->name, client->addr, client->name); if (!client->driver->command) return 0; @@ -128,7 +128,7 @@ static int detach_inform(struct i2c_client *client) { struct cx88_core *core = i2c_get_adapdata(client->adapter); - dprintk(1, "i2c detach [client=%s]\n", i2c_clientname(client)); + dprintk(1, "i2c detach [client=%s]\n", client->name); return 0; } @@ -152,7 +152,7 @@ static struct i2c_algo_bit_data cx8800_i2c_algo_template = { /* ----------------------------------------------------------------------- */ static struct i2c_adapter cx8800_i2c_adap_template = { - I2C_DEVNAME("cx2388x"), + .name = "cx2388x", .owner = THIS_MODULE, .id = I2C_HW_B_CX2388x, .client_register = attach_inform, @@ -160,7 +160,7 @@ static struct i2c_adapter cx8800_i2c_adap_template = { }; static struct i2c_client cx8800_i2c_client_template = { - I2C_DEVNAME("cx88xx internal"), + .name = "cx88xx internal", }; static char *i2c_devs[128] = { diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index 9fc5055e001c..1e273ff3f956 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -308,7 +308,7 @@ static struct i2c_driver driver = { static struct i2c_client client_template = { - I2C_DEVNAME("unset"), + .name = "unset", .driver = &driver }; @@ -429,10 +429,10 @@ static int ir_probe(struct i2c_adapter *adap) struct i2c_client c; char buf; int i,rc; switch (adap->id) { - case I2C_ALGO_BIT | I2C_HW_B_BT848: + case I2C_HW_B_BT848: probe = probe_bttv; break; - case I2C_ALGO_SAA7134: + case I2C_HW_SAA7134: probe = probe_saa7134; break; } diff --git a/drivers/media/video/msp3400.c b/drivers/media/video/msp3400.c index e956234abf24..ca02f6f14b00 100644 --- a/drivers/media/video/msp3400.c +++ b/drivers/media/video/msp3400.c @@ -1437,7 +1437,7 @@ static struct i2c_driver driver = { static struct i2c_client client_template = { - I2C_DEVNAME("(unset)"), + .name = "(unset)", .flags = I2C_CLIENT_ALLOW_USE, .driver = &driver, }; @@ -1509,7 +1509,7 @@ static int msp_attach(struct i2c_adapter *adap, int addr, int kind) } /* hello world :-) */ - printk(KERN_INFO "msp34xx: init: chip=%s",i2c_clientname(c)); + printk(KERN_INFO "msp34xx: init: chip=%s", c->name); if (HAVE_NICAM(msp)) printk(" +nicam"); if (HAVE_SIMPLE(msp)) diff --git a/drivers/media/video/ovcamchip/ov6x20.c b/drivers/media/video/ovcamchip/ov6x20.c index 3433619ad93f..b3f4d266cede 100644 --- a/drivers/media/video/ovcamchip/ov6x20.c +++ b/drivers/media/video/ovcamchip/ov6x20.c @@ -164,10 +164,10 @@ static int ov6x20_init(struct i2c_client *c) DDEBUG(4, &c->dev, "entered"); switch (c->adapter->id) { - case I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV511: + case I2C_HW_SMBUS_OV511: rc = ov_write_regvals(c, regvals_init_6x20_511); break; - case I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518: + case I2C_HW_SMBUS_OV518: rc = ov_write_regvals(c, regvals_init_6x20_518); break; default: @@ -338,7 +338,7 @@ static int ov6x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win) /******** Palette-specific regs ********/ /* OV518 needs 8 bit multiplexed in color mode, and 16 bit in B&W */ - if (c->adapter->id == (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518)) { + if (c->adapter->id == I2C_HW_SMBUS_OV518) { if (win->format == VIDEO_PALETTE_GREY) ov_write_mask(c, 0x13, 0x00, 0x20); else diff --git a/drivers/media/video/ovcamchip/ov6x30.c b/drivers/media/video/ovcamchip/ov6x30.c index 44a842379b45..6eab458ab792 100644 --- a/drivers/media/video/ovcamchip/ov6x30.c +++ b/drivers/media/video/ovcamchip/ov6x30.c @@ -301,7 +301,7 @@ static int ov6x30_mode_init(struct i2c_client *c, struct ovcamchip_window *win) /******** Palette-specific regs ********/ if (win->format == VIDEO_PALETTE_GREY) { - if (c->adapter->id == (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518)) { + if (c->adapter->id == I2C_HW_SMBUS_OV518) { /* Do nothing - we're already in 8-bit mode */ } else { ov_write_mask(c, 0x13, 0x20, 0x20); @@ -313,7 +313,7 @@ static int ov6x30_mode_init(struct i2c_client *c, struct ovcamchip_window *win) * Therefore, the OV6630 needs to be in 8-bit multiplexed * output mode */ - if (c->adapter->id == (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518)) { + if (c->adapter->id == I2C_HW_SMBUS_OV518) { /* Do nothing - we want to stay in 8-bit mode */ /* Warning: Messing with reg 0x13 breaks OV518 color */ } else { diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c index 54dd5612d3b8..2de34ebf0673 100644 --- a/drivers/media/video/ovcamchip/ovcamchip_core.c +++ b/drivers/media/video/ovcamchip/ovcamchip_core.c @@ -296,10 +296,10 @@ static int ovcamchip_attach(struct i2c_adapter *adap) * attach to adapters that are known to contain OV camera chips. */ switch (adap->id) { - case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV511): - case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518): - case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OVFX2): - case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_W9968CF): + case I2C_HW_SMBUS_OV511: + case I2C_HW_SMBUS_OV518: + case I2C_HW_SMBUS_OVFX2: + case I2C_HW_SMBUS_W9968CF: PDEBUG(1, "Adapter ID 0x%06x accepted", adap->id); break; default: @@ -314,7 +314,7 @@ static int ovcamchip_attach(struct i2c_adapter *adap) } memcpy(c, &client_template, sizeof *c); c->adapter = adap; - strcpy(i2c_clientname(c), "OV????"); + strcpy(c->name, "OV????"); ov = kmalloc(sizeof *ov, GFP_KERNEL); if (!ov) { @@ -328,7 +328,7 @@ static int ovcamchip_attach(struct i2c_adapter *adap) if (rc < 0) goto error; - strcpy(i2c_clientname(c), chip_names[ov->subtype]); + strcpy(c->name, chip_names[ov->subtype]); PDEBUG(1, "Camera chip detection complete"); @@ -421,7 +421,7 @@ static struct i2c_driver driver = { }; static struct i2c_client client_template = { - I2C_DEVNAME("(unset)"), + .name = "(unset)", .driver = &driver, }; diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c index 22d055d8a695..e116bdbed310 100644 --- a/drivers/media/video/saa7110.c +++ b/drivers/media/video/saa7110.c @@ -470,7 +470,6 @@ static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, .ignore = &ignore, - .force = &ignore, }; static struct i2c_driver i2c_driver_saa7110; diff --git a/drivers/media/video/saa7111.c b/drivers/media/video/saa7111.c index fcd897382fcf..f18df53d98ff 100644 --- a/drivers/media/video/saa7111.c +++ b/drivers/media/video/saa7111.c @@ -489,7 +489,6 @@ static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, .ignore = &ignore, - .force = &ignore, }; static struct i2c_driver i2c_driver_saa7111; diff --git a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c index 2ba997f5ef1d..e0c70f54f073 100644 --- a/drivers/media/video/saa7114.c +++ b/drivers/media/video/saa7114.c @@ -827,7 +827,6 @@ static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, .ignore = &ignore, - .force = &ignore, }; static struct i2c_driver i2c_driver_saa7114; diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c index 79d05ea1b69b..382911c6ef22 100644 --- a/drivers/media/video/saa7134/saa6752hs.c +++ b/drivers/media/video/saa7134/saa6752hs.c @@ -598,7 +598,7 @@ static struct i2c_driver driver = { static struct i2c_client client_template = { - I2C_DEVNAME("saa6752hs"), + .name = "saa6752hs", .flags = I2C_CLIENT_ALLOW_USE, .driver = &driver, }; diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c index 1203b93a572c..eae6b529713f 100644 --- a/drivers/media/video/saa7134/saa7134-i2c.c +++ b/drivers/media/video/saa7134/saa7134-i2c.c @@ -334,7 +334,7 @@ static int attach_inform(struct i2c_client *client) struct tuner_setup tun_setup; d1printk( "%s i2c attach [addr=0x%x,client=%s]\n", - client->driver->name,client->addr,i2c_clientname(client)); + client->driver->name, client->addr, client->name); if (!client->driver->command) return 0; @@ -370,8 +370,6 @@ static int attach_inform(struct i2c_client *client) } static struct i2c_algorithm saa7134_algo = { - .name = "saa7134", - .id = I2C_ALGO_SAA7134, .master_xfer = saa7134_i2c_xfer, .algo_control = algo_control, .functionality = functionality, @@ -382,14 +380,14 @@ static struct i2c_adapter saa7134_adap_template = { #ifdef I2C_CLASS_TV_ANALOG .class = I2C_CLASS_TV_ANALOG, #endif - I2C_DEVNAME("saa7134"), - .id = I2C_ALGO_SAA7134, + .name = "saa7134", + .id = I2C_HW_SAA7134, .algo = &saa7134_algo, .client_register = attach_inform, }; static struct i2c_client saa7134_client_template = { - I2C_DEVNAME("saa7134 internal"), + .name = "saa7134 internal", }; /* ----------------------------------------------------------- */ diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c index 108e7a4a0273..e93412f4407c 100644 --- a/drivers/media/video/saa7185.c +++ b/drivers/media/video/saa7185.c @@ -387,7 +387,6 @@ static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, .ignore = &ignore, - .force = &ignore, }; static struct i2c_driver i2c_driver_saa7185; diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c index 7cb1fb3e66f9..255b6088ebf9 100644 --- a/drivers/media/video/tda7432.c +++ b/drivers/media/video/tda7432.c @@ -328,7 +328,7 @@ static int tda7432_probe(struct i2c_adapter *adap) if (adap->class & I2C_CLASS_TV_ANALOG) return i2c_probe(adap, &addr_data, tda7432_attach); #else - if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_BT848)) + if (adap->id == I2C_HW_B_BT848) return i2c_probe(adap, &addr_data, tda7432_attach); #endif return 0; @@ -513,7 +513,7 @@ static struct i2c_driver driver = { static struct i2c_client client_template = { - I2C_DEVNAME("tda7432"), + .name = "tda7432", .driver = &driver, }; diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c index c29bdfc3244e..1794686612c6 100644 --- a/drivers/media/video/tda9840.c +++ b/drivers/media/video/tda9840.c @@ -205,7 +205,7 @@ static int detect(struct i2c_adapter *adapter, int address, int kind) static int attach(struct i2c_adapter *adapter) { /* let's see whether this is a know adapter we can attach to */ - if (adapter->id != I2C_ALGO_SAA7146) { + if (adapter->id != I2C_HW_SAA7146) { dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id); return -ENODEV; } @@ -231,7 +231,7 @@ static struct i2c_driver driver = { }; static struct i2c_client client_template = { - I2C_DEVNAME("tda9840"), + .name = "tda9840", .driver = &driver, }; diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c index 566e1a5ca135..7e3dcdb262b0 100644 --- a/drivers/media/video/tda9875.c +++ b/drivers/media/video/tda9875.c @@ -262,7 +262,7 @@ static int tda9875_probe(struct i2c_adapter *adap) if (adap->class & I2C_CLASS_TV_ANALOG) return i2c_probe(adap, &addr_data, tda9875_attach); #else - if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_BT848)) + if (adap->id == I2C_HW_B_BT848) return i2c_probe(adap, &addr_data, tda9875_attach); #endif return 0; @@ -384,7 +384,7 @@ static struct i2c_driver driver = { static struct i2c_client client_template = { - I2C_DEVNAME("tda9875"), + .name = "tda9875", .driver = &driver, }; diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index a28a395d6dfe..d60fc562aecd 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -618,9 +618,9 @@ static int tda9887_probe(struct i2c_adapter *adap) return i2c_probe(adap, &addr_data, tda9887_attach); #else switch (adap->id) { - case I2C_ALGO_BIT | I2C_HW_B_BT848: - case I2C_ALGO_BIT | I2C_HW_B_RIVA: - case I2C_ALGO_SAA7134: + case I2C_HW_B_BT848: + case I2C_HW_B_RIVA: + case I2C_HW_SAA7134: return i2c_probe(adap, &addr_data, tda9887_attach); break; } @@ -793,7 +793,7 @@ static struct i2c_driver driver = { }; static struct i2c_client client_template = { - I2C_DEVNAME("tda9887"), + .name = "tda9887", .flags = I2C_CLIENT_ALLOW_USE, .driver = &driver, }; diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c index b44db8a7b94d..ee3688348b66 100644 --- a/drivers/media/video/tea6415c.c +++ b/drivers/media/video/tea6415c.c @@ -86,7 +86,7 @@ static int detect(struct i2c_adapter *adapter, int address, int kind) static int attach(struct i2c_adapter *adapter) { /* let's see whether this is a know adapter we can attach to */ - if (adapter->id != I2C_ALGO_SAA7146) { + if (adapter->id != I2C_HW_SAA7146) { dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id); return -ENODEV; } @@ -200,7 +200,7 @@ static struct i2c_driver driver = { }; static struct i2c_client client_template = { - I2C_DEVNAME("tea6415c"), + .name = "tea6415c", .driver = &driver, }; diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c index 48d4db7d507b..17975c19da5e 100644 --- a/drivers/media/video/tea6420.c +++ b/drivers/media/video/tea6420.c @@ -135,7 +135,7 @@ static int tea6420_detect(struct i2c_adapter *adapter, int address, int kind) static int attach(struct i2c_adapter *adapter) { /* let's see whether this is a know adapter we can attach to */ - if (adapter->id != I2C_ALGO_SAA7146) { + if (adapter->id != I2C_HW_SAA7146) { dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id); return -ENODEV; } @@ -177,7 +177,7 @@ static struct i2c_driver driver = { }; static struct i2c_client client_template = { - I2C_DEVNAME("tea6420"), + .name = "tea6420", .driver = &driver, }; diff --git a/drivers/media/video/tuner-3036.c b/drivers/media/video/tuner-3036.c index 7d825e510ffd..79203595b9c1 100644 --- a/drivers/media/video/tuner-3036.c +++ b/drivers/media/video/tuner-3036.c @@ -41,7 +41,6 @@ static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, .ignore = &ignore, - .force = &ignore, }; /* ---------------------------------------------------------------------- */ @@ -166,7 +165,7 @@ static int tuner_probe(struct i2c_adapter *adap) { this_adap = 0; - if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_LP)) + if (adap->id == I2C_HW_B_LP) return i2c_probe(adap, &addr_data, tuner_attach); return 0; } diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index a155e99a263b..3b1893c2ae3b 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -709,7 +709,7 @@ static struct i2c_driver driver = { }, }; static struct i2c_client client_template = { - I2C_DEVNAME("(tuner unset)"), + .name = "(tuner unset)", .flags = I2C_CLIENT_ALLOW_USE, .driver = &driver, }; diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index f42a1efa8fcf..258724b2d6d2 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -162,24 +162,23 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) unsigned char buffer[2]; if (-1 == subaddr) { - dprintk("%s: chip_write: 0x%x\n", - i2c_clientname(&chip->c), val); + dprintk("%s: chip_write: 0x%x\n", chip->c.name, val); chip->shadow.bytes[1] = val; buffer[0] = val; if (1 != i2c_master_send(&chip->c,buffer,1)) { printk(KERN_WARNING "%s: I/O error (write 0x%x)\n", - i2c_clientname(&chip->c), val); + chip->c.name, val); return -1; } } else { dprintk("%s: chip_write: reg%d=0x%x\n", - i2c_clientname(&chip->c), subaddr, val); + chip->c.name, subaddr, val); chip->shadow.bytes[subaddr+1] = val; buffer[0] = subaddr; buffer[1] = val; if (2 != i2c_master_send(&chip->c,buffer,2)) { printk(KERN_WARNING "%s: I/O error (write reg%d=0x%x)\n", - i2c_clientname(&chip->c), subaddr, val); + chip->c.name, subaddr, val); return -1; } } @@ -203,11 +202,10 @@ static int chip_read(struct CHIPSTATE *chip) unsigned char buffer; if (1 != i2c_master_recv(&chip->c,&buffer,1)) { - printk(KERN_WARNING "%s: I/O error (read)\n", - i2c_clientname(&chip->c)); + printk(KERN_WARNING "%s: I/O error (read)\n", chip->c.name); return -1; } - dprintk("%s: chip_read: 0x%x\n",i2c_clientname(&chip->c),buffer); + dprintk("%s: chip_read: 0x%x\n", chip->c.name, buffer); return buffer; } @@ -222,12 +220,11 @@ static int chip_read2(struct CHIPSTATE *chip, int subaddr) write[0] = subaddr; if (2 != i2c_transfer(chip->c.adapter,msgs,2)) { - printk(KERN_WARNING "%s: I/O error (read2)\n", - i2c_clientname(&chip->c)); + printk(KERN_WARNING "%s: I/O error (read2)\n", chip->c.name); return -1; } dprintk("%s: chip_read2: reg%d=0x%x\n", - i2c_clientname(&chip->c),subaddr,read[0]); + chip->c.name, subaddr, read[0]); return read[0]; } @@ -240,7 +237,7 @@ static int chip_cmd(struct CHIPSTATE *chip, char *name, audiocmd *cmd) /* update our shadow register set; print bytes if (debug > 0) */ dprintk("%s: chip_cmd(%s): reg=%d, data:", - i2c_clientname(&chip->c),name,cmd->bytes[0]); + chip->c.name, name, cmd->bytes[0]); for (i = 1; i < cmd->count; i++) { dprintk(" 0x%x",cmd->bytes[i]); chip->shadow.bytes[i+cmd->bytes[0]] = cmd->bytes[i]; @@ -249,7 +246,7 @@ static int chip_cmd(struct CHIPSTATE *chip, char *name, audiocmd *cmd) /* send data to the chip */ if (cmd->count != i2c_master_send(&chip->c,cmd->bytes,cmd->count)) { - printk(KERN_WARNING "%s: I/O error (%s)\n", i2c_clientname(&chip->c), name); + printk(KERN_WARNING "%s: I/O error (%s)\n", chip->c.name, name); return -1; } return 0; @@ -274,9 +271,9 @@ static int chip_thread(void *data) struct CHIPSTATE *chip = data; struct CHIPDESC *desc = chiplist + chip->type; - daemonize("%s",i2c_clientname(&chip->c)); + daemonize("%s", chip->c.name); allow_signal(SIGTERM); - dprintk("%s: thread started\n", i2c_clientname(&chip->c)); + dprintk("%s: thread started\n", chip->c.name); for (;;) { add_wait_queue(&chip->wq, &wait); @@ -288,7 +285,7 @@ static int chip_thread(void *data) try_to_freeze(); if (chip->done || signal_pending(current)) break; - dprintk("%s: thread wakeup\n", i2c_clientname(&chip->c)); + dprintk("%s: thread wakeup\n", chip->c.name); /* don't do anything for radio or if mode != auto */ if (chip->norm == VIDEO_MODE_RADIO || chip->mode != 0) @@ -301,7 +298,7 @@ static int chip_thread(void *data) mod_timer(&chip->wt, jiffies+2*HZ); } - dprintk("%s: thread exiting\n", i2c_clientname(&chip->c)); + dprintk("%s: thread exiting\n", chip->c.name); complete_and_exit(&chip->texit, 0); return 0; } @@ -314,7 +311,7 @@ static void generic_checkmode(struct CHIPSTATE *chip) if (mode == chip->prevmode) return; - dprintk("%s: thread checkmode\n", i2c_clientname(&chip->c)); + dprintk("%s: thread checkmode\n", chip->c.name); chip->prevmode = mode; if (mode & VIDEO_SOUND_STEREO) @@ -1098,7 +1095,7 @@ static int tda8425_initialize(struct CHIPSTATE *chip) /* extern */ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF, /* off */ TDA8425_S1_OFF, /* on */ TDA8425_S1_CH2}; - if (chip->c.adapter->id == (I2C_ALGO_BIT | I2C_HW_B_RIVA)) { + if (chip->c.adapter->id == I2C_HW_B_RIVA) { memcpy (desc->inputmap, inputmap, sizeof (inputmap)); } return 0; @@ -1501,7 +1498,7 @@ static int chip_attach(struct i2c_adapter *adap, int addr, int kind) (desc->flags & CHIP_HAS_INPUTSEL) ? " audiomux" : ""); /* fill required data structures */ - strcpy(i2c_clientname(&chip->c),desc->name); + strcpy(chip->c.name, desc->name); chip->type = desc-chiplist; chip->shadow.count = desc->registers+1; chip->prevmode = -1; @@ -1538,7 +1535,7 @@ static int chip_attach(struct i2c_adapter *adap, int addr, int kind) chip->tpid = kernel_thread(chip_thread,(void *)chip,0); if (chip->tpid < 0) printk(KERN_WARNING "%s: kernel_thread() failed\n", - i2c_clientname(&chip->c)); + chip->c.name); wake_up_interruptible(&chip->wq); } return 0; @@ -1548,16 +1545,16 @@ static int chip_probe(struct i2c_adapter *adap) { /* don't attach on saa7146 based cards, because dedicated drivers are used */ - if ((adap->id & I2C_ALGO_SAA7146)) + if (adap->id == I2C_HW_SAA7146) return 0; #ifdef I2C_CLASS_TV_ANALOG if (adap->class & I2C_CLASS_TV_ANALOG) return i2c_probe(adap, &addr_data, chip_attach); #else switch (adap->id) { - case I2C_ALGO_BIT | I2C_HW_B_BT848: - case I2C_ALGO_BIT | I2C_HW_B_RIVA: - case I2C_ALGO_SAA7134: + case I2C_HW_B_BT848: + case I2C_HW_B_RIVA: + case I2C_HW_SAA7134: return i2c_probe(adap, &addr_data, chip_attach); } #endif @@ -1591,7 +1588,7 @@ static int chip_command(struct i2c_client *client, struct CHIPSTATE *chip = i2c_get_clientdata(client); struct CHIPDESC *desc = chiplist + chip->type; - dprintk("%s: chip_command 0x%x\n",i2c_clientname(&chip->c),cmd); + dprintk("%s: chip_command 0x%x\n", chip->c.name, cmd); switch (cmd) { case AUDC_SET_INPUT: @@ -1702,7 +1699,7 @@ static struct i2c_driver driver = { static struct i2c_client client_template = { - I2C_DEVNAME("(unset)"), + .name = "(unset)", .flags = I2C_CLIENT_ALLOW_USE, .driver = &driver, }; diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index 127ec38ebd60..3c3356a01cc6 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -534,7 +534,7 @@ static int tveeprom_attach_adapter (struct i2c_adapter *adapter) { dprintk(1,"%s: id 0x%x\n",__FUNCTION__,adapter->id); - if (adapter->id != (I2C_ALGO_BIT | I2C_HW_B_BT848)) + if (adapter->id != I2C_HW_B_BT848) return 0; return i2c_probe(adapter, &addr_data, tveeprom_detect_client); } diff --git a/drivers/media/video/tvmixer.c b/drivers/media/video/tvmixer.c index 51b99cdbf29e..a43301a154af 100644 --- a/drivers/media/video/tvmixer.c +++ b/drivers/media/video/tvmixer.c @@ -91,7 +91,7 @@ static int tvmixer_ioctl(struct inode *inode, struct file *file, unsigned int cm if (cmd == SOUND_MIXER_INFO) { mixer_info info; strlcpy(info.id, "tv card", sizeof(info.id)); - strlcpy(info.name, i2c_clientname(client), sizeof(info.name)); + strlcpy(info.name, client->name, sizeof(info.name)); info.modify_counter = 42 /* FIXME */; if (copy_to_user(argp, &info, sizeof(info))) return -EFAULT; @@ -100,7 +100,7 @@ static int tvmixer_ioctl(struct inode *inode, struct file *file, unsigned int cm if (cmd == SOUND_OLD_MIXER_INFO) { _old_mixer_info info; strlcpy(info.id, "tv card", sizeof(info.id)); - strlcpy(info.name, i2c_clientname(client), sizeof(info.name)); + strlcpy(info.name, client->name, sizeof(info.name)); if (copy_to_user(argp, &info, sizeof(info))) return -EFAULT; return 0; @@ -276,9 +276,9 @@ static int tvmixer_clients(struct i2c_client *client) #else /* TV card ??? */ switch (client->adapter->id) { - case I2C_ALGO_BIT | I2C_HW_SMBUS_VOODOO3: - case I2C_ALGO_BIT | I2C_HW_B_BT848: - case I2C_ALGO_BIT | I2C_HW_B_RIVA: + case I2C_HW_SMBUS_VOODOO3: + case I2C_HW_B_BT848: + case I2C_HW_B_RIVA: /* ok, have a look ... */ break; default: @@ -295,7 +295,7 @@ static int tvmixer_clients(struct i2c_client *client) devices[i].dev = NULL; devices[i].minor = -1; printk("tvmixer: %s unregistered (#1)\n", - i2c_clientname(client)); + client->name); return 0; } } @@ -354,7 +354,7 @@ static void __exit tvmixer_cleanup_module(void) if (devices[i].minor != -1) { unregister_sound_mixer(devices[i].minor); printk("tvmixer: %s unregistered (#2)\n", - i2c_clientname(devices[i].dev)); + devices[i].dev->name); } } } diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c index 5dbd9f6bf353..4437bdebe24f 100644 --- a/drivers/media/video/vpx3220.c +++ b/drivers/media/video/vpx3220.c @@ -576,7 +576,6 @@ static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, .ignore = &ignore, - .force = &ignore, }; static struct i2c_driver vpx3220_i2c_driver; diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c index 25743085b2d5..eed2acea1779 100644 --- a/drivers/media/video/zoran_card.c +++ b/drivers/media/video/zoran_card.c @@ -737,7 +737,7 @@ static struct i2c_algo_bit_data zoran_i2c_bit_data_template = { }; static struct i2c_adapter zoran_i2c_adapter_template = { - I2C_DEVNAME("zr36057"), + .name = "zr36057", .id = I2C_HW_B_ZR36067, .algo = NULL, .client_register = zoran_i2c_client_register, diff --git a/drivers/usb/media/w9968cf.c b/drivers/usb/media/w9968cf.c index ca9f3a30634f..f36c0b6c6e36 100644 --- a/drivers/usb/media/w9968cf.c +++ b/drivers/usb/media/w9968cf.c @@ -1523,7 +1523,6 @@ static u32 w9968cf_i2c_func(struct i2c_adapter* adap) static int w9968cf_i2c_attach_inform(struct i2c_client* client) { struct w9968cf_device* cam = i2c_get_adapdata(client->adapter); - const char* clientname = i2c_clientname(client); int id = client->driver->id, err = 0; if (id == I2C_DRIVERID_OVCAMCHIP) { @@ -1535,12 +1534,12 @@ static int w9968cf_i2c_attach_inform(struct i2c_client* client) } } else { DBG(4, "Rejected client [%s] with driver [%s]", - clientname, client->driver->name) + client->name, client->driver->name) return -EINVAL; } DBG(5, "I2C attach client [%s] with driver [%s]", - clientname, client->driver->name) + client->name, client->driver->name) return 0; } @@ -1549,12 +1548,11 @@ static int w9968cf_i2c_attach_inform(struct i2c_client* client) static int w9968cf_i2c_detach_inform(struct i2c_client* client) { struct w9968cf_device* cam = i2c_get_adapdata(client->adapter); - const char* clientname = i2c_clientname(client); if (cam->sensor_client == client) cam->sensor_client = NULL; - DBG(5, "I2C detach client [%s]", clientname) + DBG(5, "I2C detach client [%s]", client->name) return 0; } @@ -1573,15 +1571,13 @@ static int w9968cf_i2c_init(struct w9968cf_device* cam) int err = 0; static struct i2c_algorithm algo = { - .name = "W996[87]CF algorithm", - .id = I2C_ALGO_SMBUS, .smbus_xfer = w9968cf_i2c_smbus_xfer, .algo_control = w9968cf_i2c_control, .functionality = w9968cf_i2c_func, }; static struct i2c_adapter adap = { - .id = I2C_ALGO_SMBUS | I2C_HW_SMBUS_W9968CF, + .id = I2C_HW_SMBUS_W9968CF, .class = I2C_CLASS_CAM_DIGITAL, .owner = THIS_MODULE, .client_register = w9968cf_i2c_attach_inform, diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c index 762244164c81..a9d0414e4655 100644 --- a/drivers/video/aty/radeon_i2c.c +++ b/drivers/video/aty/radeon_i2c.c @@ -75,7 +75,7 @@ static int radeon_setup_i2c_bus(struct radeon_i2c_chan *chan, const char *name) strcpy(chan->adapter.name, name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_ALGO_ATI; + chan->adapter.id = I2C_HW_B_RADEON; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->rinfo->pdev->dev; chan->algo.setsda = radeon_gpio_setsda; diff --git a/drivers/video/matrox/matroxfb_maven.c b/drivers/video/matrox/matroxfb_maven.c index 67f85344f0cc..ad60bbb16cdf 100644 --- a/drivers/video/matrox/matroxfb_maven.c +++ b/drivers/video/matrox/matroxfb_maven.c @@ -1271,7 +1271,7 @@ ERROR0:; } static int maven_attach_adapter(struct i2c_adapter* adapter) { - if (adapter->id == (I2C_ALGO_BIT | I2C_HW_B_G400)) + if (adapter->id == I2C_HW_B_G400) return i2c_probe(adapter, &addr_data, &maven_detect_client); return 0; } diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c index 3757c1407c19..1a91bffdda26 100644 --- a/drivers/video/nvidia/nv_i2c.c +++ b/drivers/video/nvidia/nv_i2c.c @@ -90,14 +90,13 @@ static int nvidia_gpio_getsda(void *data) return val; } -#define I2C_ALGO_NVIDIA 0x0e0000 static int nvidia_setup_i2c_bus(struct nvidia_i2c_chan *chan, const char *name) { int rc; strcpy(chan->adapter.name, name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_ALGO_NVIDIA; + chan->adapter.id = I2C_HW_B_NVIDIA; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->pci_dev->dev; chan->algo.setsda = nvidia_gpio_setsda; diff --git a/drivers/video/riva/rivafb-i2c.c b/drivers/video/riva/rivafb-i2c.c index da1334dfd51d..77151d8e0766 100644 --- a/drivers/video/riva/rivafb-i2c.c +++ b/drivers/video/riva/rivafb-i2c.c @@ -92,14 +92,13 @@ static int riva_gpio_getsda(void* data) return val; } -#define I2C_ALGO_RIVA 0x0e0000 static int riva_setup_i2c_bus(struct riva_i2c_chan *chan, const char *name) { int rc; strcpy(chan->adapter.name, name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_ALGO_RIVA; + chan->adapter.id = I2C_HW_B_RIVA; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->pdev->dev; chan->algo.setsda = riva_gpio_setsda; diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c index 024a0cecff15..847698b5cfe7 100644 --- a/drivers/video/savage/savagefb-i2c.c +++ b/drivers/video/savage/savagefb-i2c.c @@ -137,7 +137,6 @@ static int prosavage_gpio_getsda(void* data) return (0 != (GET_CR_DATA(chan->ioaddr) & PROSAVAGE_I2C_SDA_IN)); } -#define I2C_ALGO_SAVAGE 0x0f0000 static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan, const char *name) { @@ -147,7 +146,7 @@ static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan, if (add_bus && chan->par) { strcpy(chan->adapter.name, name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_ALGO_SAVAGE; + chan->adapter.id = I2C_HW_B_SAVAGE; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->pcidev->dev; chan->algo.udelay = 40; diff --git a/include/linux/hwmon-sysfs.h b/include/linux/hwmon-sysfs.h index 1b5018a965f5..7eb4004b3601 100644 --- a/include/linux/hwmon-sysfs.h +++ b/include/linux/hwmon-sysfs.h @@ -33,4 +33,19 @@ struct sensor_device_attribute sensor_dev_attr_##_name = { \ .index = _index, \ } +struct sensor_device_attribute_2 { + struct device_attribute dev_attr; + u8 index; + u8 nr; +}; +#define to_sensor_dev_attr_2(_dev_attr) \ + container_of(_dev_attr, struct sensor_device_attribute_2, dev_attr) + +#define SENSOR_DEVICE_ATTR_2(_name,_mode,_show,_store,_nr,_index) \ +struct sensor_device_attribute_2 sensor_dev_attr_##_name = { \ + .dev_attr = __ATTR(_name,_mode,_show,_store), \ + .index = _index, \ + .nr = _nr, \ +} + #endif /* _LINUX_HWMON_SYSFS_H */ diff --git a/include/linux/hwmon-vid.h b/include/linux/hwmon-vid.h new file mode 100644 index 000000000000..cd4b7a042b86 --- /dev/null +++ b/include/linux/hwmon-vid.h @@ -0,0 +1,45 @@ +/* + hwmon-vid.h - VID/VRM/VRD voltage conversions + + Originally part of lm_sensors + Copyright (c) 2002 Mark D. Studebaker + With assistance from Trent Piepho + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _LINUX_HWMON_VID_H +#define _LINUX_HWMON_VID_H + +int vid_from_reg(int val, int vrm); +int vid_which_vrm(void); + +/* vrm is the VRM/VRD document version multiplied by 10. + val is in mV to avoid floating point in the kernel. + Returned value is the 4-, 5- or 6-bit VID code. + Note that only VRM 9.x is supported for now. */ +static inline int vid_to_reg(int val, int vrm) +{ + switch (vrm) { + case 91: /* VRM 9.1 */ + case 90: /* VRM 9.0 */ + return ((val >= 1100) && (val <= 1850) ? + ((18499 - val * 10) / 25 + 5) / 10 : -1); + default: + return -1; + } +} + +#endif /* _LINUX_HWMON_VID_H */ diff --git a/include/linux/hwmon.h b/include/linux/hwmon.h new file mode 100644 index 000000000000..0efd994c37f1 --- /dev/null +++ b/include/linux/hwmon.h @@ -0,0 +1,35 @@ +/* + hwmon.h - part of lm_sensors, Linux kernel modules for hardware monitoring + + This file declares helper functions for the sysfs class "hwmon", + for use by sensors drivers. + + Copyright (C) 2005 Mark M. Hoffman + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. +*/ + +#ifndef _HWMON_H_ +#define _HWMON_H_ + +#include + +struct class_device *hwmon_device_register(struct device *dev); + +void hwmon_device_unregister(struct class_device *cdev); + +/* Scale user input to sensible values */ +static inline int SENSORS_LIMIT(long value, long low, long high) +{ + if (value < low) + return low; + else if (value > high) + return high; + else + return value; +} + +#endif + diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 33f08258f22b..44f30876a1c9 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -1,6 +1,6 @@ /* ------------------------------------------------------------------------- */ /* */ -/* i2c.h - definitions for the i2c-bus interface */ +/* i2c-id.h - identifier values for i2c drivers and adapters */ /* */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-1999 Simon G. Vogl @@ -23,16 +23,6 @@ #ifndef LINUX_I2C_ID_H #define LINUX_I2C_ID_H -/* - * This file is part of the i2c-bus package and contains the identifier - * values for drivers, adapters and other folk populating these serial - * worlds. - * - * These will change often (i.e. additions) , therefore this has been - * separated from the functional interface definitions of the i2c api. - * - */ - /* * ---- Driver types ----------------------------------------------------- * device id name + number function description, i2c address(es) @@ -170,151 +160,113 @@ /* * ---- Adapter types ---------------------------------------------------- - * - * First, we distinguish between several algorithms to access the hardware - * interface types, as a PCF 8584 needs other care than a bit adapter. - */ - -#define I2C_ALGO_NONE 0x000000 -#define I2C_ALGO_BIT 0x010000 /* bit style adapters */ -#define I2C_ALGO_PCF 0x020000 /* PCF 8584 style adapters */ -#define I2C_ALGO_ATI 0x030000 /* ATI video card */ -#define I2C_ALGO_SMBUS 0x040000 -#define I2C_ALGO_ISA 0x050000 /* lm_sensors ISA pseudo-adapter */ -#define I2C_ALGO_SAA7146 0x060000 /* SAA 7146 video decoder bus */ -#define I2C_ALGO_ACB 0x070000 /* ACCESS.bus algorithm */ -#define I2C_ALGO_IIC 0x080000 /* ITE IIC bus */ -#define I2C_ALGO_SAA7134 0x090000 -#define I2C_ALGO_MPC824X 0x0a0000 /* Motorola 8240 / 8245 */ -#define I2C_ALGO_IPMI 0x0b0000 /* IPMI dummy adapter */ -#define I2C_ALGO_IPMB 0x0c0000 /* IPMB adapter */ -#define I2C_ALGO_MPC107 0x0d0000 -#define I2C_ALGO_EC 0x100000 /* ACPI embedded controller */ - -#define I2C_ALGO_MPC8XX 0x110000 /* MPC8xx PowerPC I2C algorithm */ -#define I2C_ALGO_OCP 0x120000 /* IBM or otherwise On-chip I2C algorithm */ -#define I2C_ALGO_BITHS 0x130000 /* enhanced bit style adapters */ -#define I2C_ALGO_IOP3XX 0x140000 /* XSCALE IOP3XX On-chip I2C alg */ -#define I2C_ALGO_SIBYTE 0x150000 /* Broadcom SiByte SOCs */ -#define I2C_ALGO_SGI 0x160000 /* SGI algorithm */ - -#define I2C_ALGO_USB 0x170000 /* USB algorithm */ -#define I2C_ALGO_VIRT 0x180000 /* Virtual bus adapter */ - -#define I2C_ALGO_MV64XXX 0x190000 /* Marvell mv64xxx i2c ctlr */ -#define I2C_ALGO_PCA 0x1a0000 /* PCA 9564 style adapters */ -#define I2C_ALGO_AU1550 0x1b0000 /* Au1550 PSC algorithm */ - -#define I2C_ALGO_EXP 0x800000 /* experimental */ - -#define I2C_ALGO_MASK 0xff0000 /* Mask for algorithms */ -#define I2C_ALGO_SHIFT 0x10 /* right shift to get index values */ - -#define I2C_HW_ADAPS 0x10000 /* # adapter types */ -#define I2C_HW_MASK 0xffff - - -/* hw specific modules that are defined per algorithm layer */ /* --- Bit algorithm adapters */ -#define I2C_HW_B_LP 0x00 /* Parallel port Philips style adapter */ -#define I2C_HW_B_LPC 0x01 /* Parallel port, over control reg. */ -#define I2C_HW_B_SER 0x02 /* Serial line interface */ -#define I2C_HW_B_ELV 0x03 /* ELV Card */ -#define I2C_HW_B_VELLE 0x04 /* Vellemann K8000 */ -#define I2C_HW_B_BT848 0x05 /* BT848 video boards */ -#define I2C_HW_B_WNV 0x06 /* Winnov Videums */ -#define I2C_HW_B_VIA 0x07 /* Via vt82c586b */ -#define I2C_HW_B_HYDRA 0x08 /* Apple Hydra Mac I/O */ -#define I2C_HW_B_G400 0x09 /* Matrox G400 */ -#define I2C_HW_B_I810 0x0a /* Intel I810 */ -#define I2C_HW_B_VOO 0x0b /* 3dfx Voodoo 3 / Banshee */ -#define I2C_HW_B_PPORT 0x0c /* Primitive parallel port adapter */ -#define I2C_HW_B_SAVG 0x0d /* Savage 4 */ -#define I2C_HW_B_SCX200 0x0e /* Nat'l Semi SCx200 I2C */ -#define I2C_HW_B_RIVA 0x10 /* Riva based graphics cards */ -#define I2C_HW_B_IOC 0x11 /* IOC bit-wiggling */ -#define I2C_HW_B_TSUNA 0x12 /* DEC Tsunami chipset */ -#define I2C_HW_B_FRODO 0x13 /* 2d3D, Inc. SA-1110 Development Board */ -#define I2C_HW_B_OMAHA 0x14 /* Omaha I2C interface (ARM) */ -#define I2C_HW_B_GUIDE 0x15 /* Guide bit-basher */ -#define I2C_HW_B_IXP2000 0x16 /* GPIO on IXP2000 systems */ -#define I2C_HW_B_IXP4XX 0x17 /* GPIO on IXP4XX systems */ -#define I2C_HW_B_S3VIA 0x18 /* S3Via ProSavage adapter */ -#define I2C_HW_B_ZR36067 0x19 /* Zoran-36057/36067 based boards */ -#define I2C_HW_B_PCILYNX 0x1a /* TI PCILynx I2C adapter */ -#define I2C_HW_B_CX2388x 0x1b /* connexant 2388x based tv cards */ +#define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */ +#define I2C_HW_B_LPC 0x010001 /* Parallel port control reg. */ +#define I2C_HW_B_SER 0x010002 /* Serial line interface */ +#define I2C_HW_B_ELV 0x010003 /* ELV Card */ +#define I2C_HW_B_VELLE 0x010004 /* Vellemann K8000 */ +#define I2C_HW_B_BT848 0x010005 /* BT848 video boards */ +#define I2C_HW_B_WNV 0x010006 /* Winnov Videums */ +#define I2C_HW_B_VIA 0x010007 /* Via vt82c586b */ +#define I2C_HW_B_HYDRA 0x010008 /* Apple Hydra Mac I/O */ +#define I2C_HW_B_G400 0x010009 /* Matrox G400 */ +#define I2C_HW_B_I810 0x01000a /* Intel I810 */ +#define I2C_HW_B_VOO 0x01000b /* 3dfx Voodoo 3 / Banshee */ +#define I2C_HW_B_PPORT 0x01000c /* Primitive parallel port adapter */ +#define I2C_HW_B_SAVG 0x01000d /* Savage 4 */ +#define I2C_HW_B_SCX200 0x01000e /* Nat'l Semi SCx200 I2C */ +#define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */ +#define I2C_HW_B_IOC 0x010011 /* IOC bit-wiggling */ +#define I2C_HW_B_TSUNA 0x010012 /* DEC Tsunami chipset */ +#define I2C_HW_B_FRODO 0x010013 /* 2d3D SA-1110 Development Board */ +#define I2C_HW_B_OMAHA 0x010014 /* Omaha I2C interface (ARM) */ +#define I2C_HW_B_GUIDE 0x010015 /* Guide bit-basher */ +#define I2C_HW_B_IXP2000 0x010016 /* GPIO on IXP2000 systems */ +#define I2C_HW_B_IXP4XX 0x010017 /* GPIO on IXP4XX systems */ +#define I2C_HW_B_S3VIA 0x010018 /* S3Via ProSavage adapter */ +#define I2C_HW_B_ZR36067 0x010019 /* Zoran-36057/36067 based boards */ +#define I2C_HW_B_PCILYNX 0x01001a /* TI PCILynx I2C adapter */ +#define I2C_HW_B_CX2388x 0x01001b /* connexant 2388x based tv cards */ +#define I2C_HW_B_NVIDIA 0x01001c /* nvidia framebuffer driver */ +#define I2C_HW_B_SAVAGE 0x01001d /* savage framebuffer driver */ +#define I2C_HW_B_RADEON 0x01001e /* radeon framebuffer driver */ /* --- PCF 8584 based algorithms */ -#define I2C_HW_P_LP 0x00 /* Parallel port interface */ -#define I2C_HW_P_ISA 0x01 /* generic ISA Bus inteface card */ -#define I2C_HW_P_ELEK 0x02 /* Elektor ISA Bus inteface card */ +#define I2C_HW_P_LP 0x020000 /* Parallel port interface */ +#define I2C_HW_P_ISA 0x020001 /* generic ISA Bus inteface card */ +#define I2C_HW_P_ELEK 0x020002 /* Elektor ISA Bus inteface card */ /* --- PCA 9564 based algorithms */ -#define I2C_HW_A_ISA 0x00 /* generic ISA Bus interface card */ +#define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */ /* --- ACPI Embedded controller algorithms */ -#define I2C_HW_ACPI_EC 0x00 +#define I2C_HW_ACPI_EC 0x1f0000 /* --- MPC824x PowerPC adapters */ -#define I2C_HW_MPC824X 0x00 /* Motorola 8240 / 8245 */ +#define I2C_HW_MPC824X 0x100001 /* Motorola 8240 / 8245 */ /* --- MPC8xx PowerPC adapters */ -#define I2C_HW_MPC8XX_EPON 0x00 /* Eponymous MPC8xx I2C adapter */ +#define I2C_HW_MPC8XX_EPON 0x110000 /* Eponymous MPC8xx I2C adapter */ /* --- ITE based algorithms */ -#define I2C_HW_I_IIC 0x00 /* controller on the ITE */ +#define I2C_HW_I_IIC 0x080000 /* controller on the ITE */ /* --- PowerPC on-chip adapters */ -#define I2C_HW_OCP 0x00 /* IBM on-chip I2C adapter */ +#define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */ /* --- Broadcom SiByte adapters */ -#define I2C_HW_SIBYTE 0x00 +#define I2C_HW_SIBYTE 0x150000 /* --- SGI adapters */ -#define I2C_HW_SGI_VINO 0x00 -#define I2C_HW_SGI_MACE 0x01 +#define I2C_HW_SGI_VINO 0x160000 +#define I2C_HW_SGI_MACE 0x160001 /* --- XSCALE on-chip adapters */ -#define I2C_HW_IOP3XX 0x00 +#define I2C_HW_IOP3XX 0x140000 /* --- Au1550 PSC adapters adapters */ -#define I2C_HW_AU1550_PSC 0x00 +#define I2C_HW_AU1550_PSC 0x1b0000 /* --- SMBus only adapters */ -#define I2C_HW_SMBUS_PIIX4 0x00 -#define I2C_HW_SMBUS_ALI15X3 0x01 -#define I2C_HW_SMBUS_VIA2 0x02 -#define I2C_HW_SMBUS_VOODOO3 0x03 -#define I2C_HW_SMBUS_I801 0x04 -#define I2C_HW_SMBUS_AMD756 0x05 -#define I2C_HW_SMBUS_SIS5595 0x06 -#define I2C_HW_SMBUS_ALI1535 0x07 -#define I2C_HW_SMBUS_SIS630 0x08 -#define I2C_HW_SMBUS_SIS96X 0x09 -#define I2C_HW_SMBUS_AMD8111 0x0a -#define I2C_HW_SMBUS_SCX200 0x0b -#define I2C_HW_SMBUS_NFORCE2 0x0c -#define I2C_HW_SMBUS_W9968CF 0x0d -#define I2C_HW_SMBUS_OV511 0x0e /* OV511(+) USB 1.1 webcam ICs */ -#define I2C_HW_SMBUS_OV518 0x0f /* OV518(+) USB 1.1 webcam ICs */ -#define I2C_HW_SMBUS_OV519 0x10 /* OV519 USB 1.1 webcam IC */ -#define I2C_HW_SMBUS_OVFX2 0x11 /* Cypress/OmniVision FX2 webcam */ +#define I2C_HW_SMBUS_PIIX4 0x040000 +#define I2C_HW_SMBUS_ALI15X3 0x040001 +#define I2C_HW_SMBUS_VIA2 0x040002 +#define I2C_HW_SMBUS_VOODOO3 0x040003 +#define I2C_HW_SMBUS_I801 0x040004 +#define I2C_HW_SMBUS_AMD756 0x040005 +#define I2C_HW_SMBUS_SIS5595 0x040006 +#define I2C_HW_SMBUS_ALI1535 0x040007 +#define I2C_HW_SMBUS_SIS630 0x040008 +#define I2C_HW_SMBUS_SIS96X 0x040009 +#define I2C_HW_SMBUS_AMD8111 0x04000a +#define I2C_HW_SMBUS_SCX200 0x04000b +#define I2C_HW_SMBUS_NFORCE2 0x04000c +#define I2C_HW_SMBUS_W9968CF 0x04000d +#define I2C_HW_SMBUS_OV511 0x04000e /* OV511(+) USB 1.1 webcam ICs */ +#define I2C_HW_SMBUS_OV518 0x04000f /* OV518(+) USB 1.1 webcam ICs */ +#define I2C_HW_SMBUS_OV519 0x040010 /* OV519 USB 1.1 webcam IC */ +#define I2C_HW_SMBUS_OVFX2 0x040011 /* Cypress/OmniVision FX2 webcam */ /* --- ISA pseudo-adapter */ -#define I2C_HW_ISA 0x00 +#define I2C_HW_ISA 0x050000 /* --- IPMI pseudo-adapter */ -#define I2C_HW_IPMI 0x00 +#define I2C_HW_IPMI 0x0b0000 /* --- IPMB adapter */ -#define I2C_HW_IPMB 0x00 +#define I2C_HW_IPMB 0x0c0000 /* --- MCP107 adapter */ -#define I2C_HW_MPC107 0x00 +#define I2C_HW_MPC107 0x0d0000 /* --- Marvell mv64xxx i2c adapter */ -#define I2C_HW_MV64XXX 0x00 +#define I2C_HW_MV64XXX 0x190000 + +/* --- Miscellaneous adapters */ +#define I2C_HW_SAA7146 0x060000 /* SAA7146 video decoder bus */ +#define I2C_HW_SAA7134 0x090000 /* SAA7134 video decoder bus */ #endif /* LINUX_I2C_ID_H */ diff --git a/include/linux/i2c-isa.h b/include/linux/i2c-isa.h new file mode 100644 index 000000000000..67e3598c4cec --- /dev/null +++ b/include/linux/i2c-isa.h @@ -0,0 +1,36 @@ +/* + * i2c-isa.h - definitions for the i2c-isa pseudo-i2c-adapter interface + * + * Copyright (C) 2005 Jean Delvare + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _LINUX_I2C_ISA_H +#define _LINUX_I2C_ISA_H + +#include + +extern int i2c_isa_add_driver(struct i2c_driver *driver); +extern int i2c_isa_del_driver(struct i2c_driver *driver); + +/* Detect whether we are on the isa bus. This is only useful to hybrid + (i2c+isa) drivers. */ +#define i2c_is_isa_adapter(adapptr) \ + ((adapptr)->id == I2C_HW_ISA) +#define i2c_is_isa_client(clientptr) \ + i2c_is_isa_adapter((clientptr)->adapter) + +#endif /* _LINUX_I2C_ISA_H */ diff --git a/include/linux/i2c-sensor.h b/include/linux/i2c-sensor.h deleted file mode 100644 index 21b625204956..000000000000 --- a/include/linux/i2c-sensor.h +++ /dev/null @@ -1,263 +0,0 @@ -/* - i2c-sensor.h - Part of the i2c package - was originally sensors.h - Part of lm_sensors, Linux kernel modules - for hardware monitoring - Copyright (c) 1998, 1999 Frodo Looijaard - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#ifndef _LINUX_I2C_SENSOR_H -#define _LINUX_I2C_SENSOR_H - -/* A structure containing detect information. - Force variables overrule all other variables; they force a detection on - that place. If a specific chip is given, the module blindly assumes this - chip type is present; if a general force (kind == 0) is given, the module - will still try to figure out what type of chip is present. This is useful - if for some reasons the detect for SMBus or ISA address space filled - fails. - probe: insmod parameter. Initialize this list with I2C_CLIENT_ISA_END values. - A list of pairs. The first value is a bus number (ANY_I2C_ISA_BUS for - the ISA bus, -1 for any I2C bus), the second is the address. - kind: The kind of chip. 0 equals any chip. -*/ -struct i2c_force_data { - unsigned short *force; - unsigned short kind; -}; - -/* A structure containing the detect information. - normal_i2c: filled in by the module writer. Terminated by I2C_CLIENT_ISA_END. - A list of I2C addresses which should normally be examined. - normal_isa: filled in by the module writer. Terminated by SENSORS_ISA_END. - A list of ISA addresses which should normally be examined. - probe: insmod parameter. Initialize this list with I2C_CLIENT_ISA_END values. - A list of pairs. The first value is a bus number (ANY_I2C_ISA_BUS for - the ISA bus, -1 for any I2C bus), the second is the address. These - addresses are also probed, as if they were in the 'normal' list. - ignore: insmod parameter. Initialize this list with I2C_CLIENT_ISA_END values. - A list of pairs. The first value is a bus number (ANY_I2C_ISA_BUS for - the ISA bus, -1 for any I2C bus), the second is the I2C address. These - addresses are never probed. This parameter overrules 'normal' and - 'probe', but not the 'force' lists. - force_data: insmod parameters. A list, ending with an element of which - the force field is NULL. -*/ -struct i2c_address_data { - unsigned short *normal_i2c; - unsigned int *normal_isa; - unsigned short *probe; - unsigned short *ignore; - struct i2c_force_data *forces; -}; - -#define SENSORS_MODULE_PARM_FORCE(name) \ - I2C_CLIENT_MODULE_PARM(force_ ## name, \ - "List of adapter,address pairs which are unquestionably" \ - " assumed to contain a `" # name "' chip") - - -/* This defines several insmod variables, and the addr_data structure */ -#define SENSORS_INSMOD \ - I2C_CLIENT_MODULE_PARM(probe, \ - "List of adapter,address pairs to scan additionally"); \ - I2C_CLIENT_MODULE_PARM(ignore, \ - "List of adapter,address pairs not to scan"); \ - static struct i2c_address_data addr_data = { \ - .normal_i2c = normal_i2c, \ - .normal_isa = normal_isa, \ - .probe = probe, \ - .ignore = ignore, \ - .forces = forces, \ - } - -/* The following functions create an enum with the chip names as elements. - The first element of the enum is any_chip. These are the only macros - a module will want to use. */ - -#define SENSORS_INSMOD_0 \ - enum chips { any_chip }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - static struct i2c_force_data forces[] = {{force,any_chip},{NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_1(chip1) \ - enum chips { any_chip, chip1 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - static struct i2c_force_data forces[] = {{force,any_chip},\ - {force_ ## chip1,chip1}, \ - {NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_2(chip1,chip2) \ - enum chips { any_chip, chip1, chip2 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - SENSORS_MODULE_PARM_FORCE(chip2); \ - static struct i2c_force_data forces[] = {{force,any_chip}, \ - {force_ ## chip1,chip1}, \ - {force_ ## chip2,chip2}, \ - {NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_3(chip1,chip2,chip3) \ - enum chips { any_chip, chip1, chip2, chip3 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - SENSORS_MODULE_PARM_FORCE(chip2); \ - SENSORS_MODULE_PARM_FORCE(chip3); \ - static struct i2c_force_data forces[] = {{force,any_chip}, \ - {force_ ## chip1,chip1}, \ - {force_ ## chip2,chip2}, \ - {force_ ## chip3,chip3}, \ - {NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_4(chip1,chip2,chip3,chip4) \ - enum chips { any_chip, chip1, chip2, chip3, chip4 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - SENSORS_MODULE_PARM_FORCE(chip2); \ - SENSORS_MODULE_PARM_FORCE(chip3); \ - SENSORS_MODULE_PARM_FORCE(chip4); \ - static struct i2c_force_data forces[] = {{force,any_chip}, \ - {force_ ## chip1,chip1}, \ - {force_ ## chip2,chip2}, \ - {force_ ## chip3,chip3}, \ - {force_ ## chip4,chip4}, \ - {NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_5(chip1,chip2,chip3,chip4,chip5) \ - enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - SENSORS_MODULE_PARM_FORCE(chip2); \ - SENSORS_MODULE_PARM_FORCE(chip3); \ - SENSORS_MODULE_PARM_FORCE(chip4); \ - SENSORS_MODULE_PARM_FORCE(chip5); \ - static struct i2c_force_data forces[] = {{force,any_chip}, \ - {force_ ## chip1,chip1}, \ - {force_ ## chip2,chip2}, \ - {force_ ## chip3,chip3}, \ - {force_ ## chip4,chip4}, \ - {force_ ## chip5,chip5}, \ - {NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_6(chip1,chip2,chip3,chip4,chip5,chip6) \ - enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - SENSORS_MODULE_PARM_FORCE(chip2); \ - SENSORS_MODULE_PARM_FORCE(chip3); \ - SENSORS_MODULE_PARM_FORCE(chip4); \ - SENSORS_MODULE_PARM_FORCE(chip5); \ - SENSORS_MODULE_PARM_FORCE(chip6); \ - static struct i2c_force_data forces[] = {{force,any_chip}, \ - {force_ ## chip1,chip1}, \ - {force_ ## chip2,chip2}, \ - {force_ ## chip3,chip3}, \ - {force_ ## chip4,chip4}, \ - {force_ ## chip5,chip5}, \ - {force_ ## chip6,chip6}, \ - {NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_7(chip1,chip2,chip3,chip4,chip5,chip6,chip7) \ - enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, chip7 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - SENSORS_MODULE_PARM_FORCE(chip2); \ - SENSORS_MODULE_PARM_FORCE(chip3); \ - SENSORS_MODULE_PARM_FORCE(chip4); \ - SENSORS_MODULE_PARM_FORCE(chip5); \ - SENSORS_MODULE_PARM_FORCE(chip6); \ - SENSORS_MODULE_PARM_FORCE(chip7); \ - static struct i2c_force_data forces[] = {{force,any_chip}, \ - {force_ ## chip1,chip1}, \ - {force_ ## chip2,chip2}, \ - {force_ ## chip3,chip3}, \ - {force_ ## chip4,chip4}, \ - {force_ ## chip5,chip5}, \ - {force_ ## chip6,chip6}, \ - {force_ ## chip7,chip7}, \ - {NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_8(chip1,chip2,chip3,chip4,chip5,chip6,chip7,chip8) \ - enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, chip7, chip8 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - SENSORS_MODULE_PARM_FORCE(chip2); \ - SENSORS_MODULE_PARM_FORCE(chip3); \ - SENSORS_MODULE_PARM_FORCE(chip4); \ - SENSORS_MODULE_PARM_FORCE(chip5); \ - SENSORS_MODULE_PARM_FORCE(chip6); \ - SENSORS_MODULE_PARM_FORCE(chip7); \ - SENSORS_MODULE_PARM_FORCE(chip8); \ - static struct i2c_force_data forces[] = {{force,any_chip}, \ - {force_ ## chip1,chip1}, \ - {force_ ## chip2,chip2}, \ - {force_ ## chip3,chip3}, \ - {force_ ## chip4,chip4}, \ - {force_ ## chip5,chip5}, \ - {force_ ## chip6,chip6}, \ - {force_ ## chip7,chip7}, \ - {force_ ## chip8,chip8}, \ - {NULL}}; \ - SENSORS_INSMOD - -/* Detect function. It iterates over all possible addresses itself. For - SMBus addresses, it will only call found_proc if some client is connected - to the SMBus (unless a 'force' matched); for ISA detections, this is not - done. */ -extern int i2c_detect(struct i2c_adapter *adapter, - struct i2c_address_data *address_data, - int (*found_proc) (struct i2c_adapter *, int, int)); - - -/* This macro is used to scale user-input to sensible values in almost all - chip drivers. */ -static inline int SENSORS_LIMIT(long value, long low, long high) -{ - if (value < low) - return low; - else if (value > high) - return high; - else - return value; -} -#endif /* def _LINUX_I2C_SENSOR_H */ diff --git a/include/linux/i2c-vid.h b/include/linux/i2c-vid.h deleted file mode 100644 index 41d0635e0ba9..000000000000 --- a/include/linux/i2c-vid.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - i2c-vid.h - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 2002 Mark D. Studebaker - With assistance from Trent Piepho - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - This file contains common code for decoding VID pins. - This file is #included in various chip drivers in this directory. - As the user is unlikely to load more than one driver which - includes this code we don't worry about the wasted space. - Reference: VRM x.y DC-DC Converter Design Guidelines, - available at http://developer.intel.com -*/ - -/* - AMD Opteron processors don't follow the Intel VRM spec. - I'm going to "make up" 2.4 as the VRM spec for the Opterons. - No good reason just a mnemonic for the 24x Opteron processor - series - - Opteron VID encoding is: - - 00000 = 1.550 V - 00001 = 1.525 V - . . . . - 11110 = 0.800 V - 11111 = 0.000 V (off) - */ - -/* - Legal val values 0x00 - 0x1f; except for VRD 10.0, 0x00 - 0x3f. - vrm is the Intel VRM document version. - Note: vrm version is scaled by 10 and the return value is scaled by 1000 - to avoid floating point in the kernel. -*/ - -int i2c_which_vrm(void); - -#define DEFAULT_VRM 82 - -static inline int vid_from_reg(int val, int vrm) -{ - int vid; - - switch(vrm) { - - case 0: - return 0; - - case 100: /* VRD 10.0 */ - if((val & 0x1f) == 0x1f) - return 0; - if((val & 0x1f) <= 0x09 || val == 0x0a) - vid = 10875 - (val & 0x1f) * 250; - else - vid = 18625 - (val & 0x1f) * 250; - if(val & 0x20) - vid -= 125; - vid /= 10; /* only return 3 dec. places for now */ - return vid; - - case 24: /* Opteron processor */ - return(val == 0x1f ? 0 : 1550 - val * 25); - - case 91: /* VRM 9.1 */ - case 90: /* VRM 9.0 */ - return(val == 0x1f ? 0 : - 1850 - val * 25); - - case 85: /* VRM 8.5 */ - return((val & 0x10 ? 25 : 0) + - ((val & 0x0f) > 0x04 ? 2050 : 1250) - - ((val & 0x0f) * 50)); - - case 84: /* VRM 8.4 */ - val &= 0x0f; - /* fall through */ - default: /* VRM 8.2 */ - return(val == 0x1f ? 0 : - val & 0x10 ? 5100 - (val) * 100 : - 2050 - (val) * 50); - } -} - -static inline int vid_to_reg(int val, int vrm) -{ - switch (vrm) { - case 91: /* VRM 9.1 */ - case 90: /* VRM 9.0 */ - return ((val >= 1100) && (val <= 1850) ? - ((18499 - val * 10) / 25 + 5) / 10 : -1); - default: - return -1; - } -} diff --git a/include/linux/i2c.h b/include/linux/i2c.h index be837b13f297..be35332b67e6 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -34,6 +34,13 @@ #include /* for struct device */ #include +/* --- For i2c-isa ---------------------------------------------------- */ + +extern void i2c_adapter_dev_release(struct device *dev); +extern struct device_driver i2c_adapter_driver; +extern struct class i2c_adapter_class; +extern struct bus_type i2c_bus_type; + /* --- General options ------------------------------------------------ */ struct i2c_msg; @@ -41,7 +48,6 @@ struct i2c_algorithm; struct i2c_adapter; struct i2c_client; struct i2c_driver; -struct i2c_client_address_data; union i2c_smbus_data; /* @@ -143,12 +149,9 @@ struct i2c_driver { */ struct i2c_client { unsigned int flags; /* div., see below */ - unsigned int addr; /* chip address - NOTE: 7bit */ + unsigned short addr; /* chip address - NOTE: 7bit */ /* addresses are stored in the */ - /* _LOWER_ 7 bits of this char */ - /* addr: unsigned int to make lm_sensors i2c-isa adapter work - more cleanly. It does not take any more memory space, due to - alignment considerations */ + /* _LOWER_ 7 bits */ struct i2c_adapter *adapter; /* the adapter we sit on */ struct i2c_driver *driver; /* and our access routines */ int usage_count; /* How many accesses currently */ @@ -160,6 +163,11 @@ struct i2c_client { }; #define to_i2c_client(d) container_of(d, struct i2c_client, dev) +static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj) +{ + return to_i2c_client(container_of(kobj, struct device, kobj)); +} + static inline void *i2c_get_clientdata (struct i2c_client *dev) { return dev_get_drvdata (&dev->dev); @@ -170,13 +178,6 @@ static inline void i2c_set_clientdata (struct i2c_client *dev, void *data) dev_set_drvdata (&dev->dev, data); } -#define I2C_DEVNAME(str) .name = str - -static inline char *i2c_clientname(struct i2c_client *c) -{ - return &c->name[0]; -} - /* * The following structs are for those who like to implement new bus drivers: * i2c_algorithm is the interface to a class of hardware solutions which can @@ -184,9 +185,6 @@ static inline char *i2c_clientname(struct i2c_client *c) * to name two of the most common. */ struct i2c_algorithm { - char name[32]; /* textual description */ - unsigned int id; - /* If an adapter algorithm can't do I2C-level access, set master_xfer to NULL. If an adapter algorithm can do SMBus access, set smbus_xfer. If set to NULL, the SMBus protocol is simulated @@ -214,8 +212,7 @@ struct i2c_algorithm { */ struct i2c_adapter { struct module *owner; - unsigned int id;/* == is algo->id | hwdep.struct->id, */ - /* for registered values see below */ + unsigned int id; unsigned int class; struct i2c_algorithm *algo;/* the algorithm to access the bus */ void *algo_data; @@ -292,12 +289,11 @@ struct i2c_client_address_data { unsigned short *normal_i2c; unsigned short *probe; unsigned short *ignore; - unsigned short *force; + unsigned short **forces; }; /* Internal numbers to terminate lists */ #define I2C_CLIENT_END 0xfffeU -#define I2C_CLIENT_ISA_END 0xfffefffeU /* The numbers to use to set I2C bus address */ #define ANY_I2C_BUS 0xffff @@ -356,10 +352,6 @@ extern int i2c_probe(struct i2c_adapter *adapter, */ extern int i2c_control(struct i2c_client *,unsigned int, unsigned long); -/* This call returns a unique low identifier for each registered adapter, - * or -1 if the adapter was not registered. - */ -extern int i2c_adapter_id(struct i2c_adapter *adap); extern struct i2c_adapter* i2c_get_adapter(int id); extern void i2c_put_adapter(struct i2c_adapter *adap); @@ -376,6 +368,12 @@ static inline int i2c_check_functionality(struct i2c_adapter *adap, u32 func) return (func & i2c_get_functionality(adap)) == func; } +/* Return id number for a specific adapter */ +static inline int i2c_adapter_id(struct i2c_adapter *adap) +{ + return adap->nr; +} + /* * I2C Message - used for pure i2c transaction, also from /dev interface */ @@ -510,9 +508,6 @@ union i2c_smbus_data { #define I2C_FUNCS 0x0705 /* Get the adapter functionality */ #define I2C_RDWR 0x0707 /* Combined R/W transfer (one stop only)*/ #define I2C_PEC 0x0708 /* != 0 for SMBus PEC */ -#if 0 -#define I2C_ACK_TEST 0x0710 /* See if a slave is at a specific address */ -#endif #define I2C_SMBUS 0x0720 /* SMBus-level access */ @@ -556,27 +551,148 @@ union i2c_smbus_data { module_param_array(var, short, &var##_num, 0); \ MODULE_PARM_DESC(var,desc) -/* This is the one you want to use in your own modules */ +#define I2C_CLIENT_MODULE_PARM_FORCE(name) \ +I2C_CLIENT_MODULE_PARM(force_##name, \ + "List of adapter,address pairs which are " \ + "unquestionably assumed to contain a `" \ + # name "' chip") + + +#define I2C_CLIENT_INSMOD_COMMON \ +I2C_CLIENT_MODULE_PARM(probe, "List of adapter,address pairs to scan " \ + "additionally"); \ +I2C_CLIENT_MODULE_PARM(ignore, "List of adapter,address pairs not to " \ + "scan"); \ +static struct i2c_client_address_data addr_data = { \ + .normal_i2c = normal_i2c, \ + .probe = probe, \ + .ignore = ignore, \ + .forces = forces, \ +} + +/* These are the ones you want to use in your own drivers. Pick the one + which matches the number of devices the driver differenciates between. */ #define I2C_CLIENT_INSMOD \ - I2C_CLIENT_MODULE_PARM(probe, \ - "List of adapter,address pairs to scan additionally"); \ - I2C_CLIENT_MODULE_PARM(ignore, \ - "List of adapter,address pairs not to scan"); \ I2C_CLIENT_MODULE_PARM(force, \ "List of adapter,address pairs to boldly assume " \ "to be present"); \ - static struct i2c_client_address_data addr_data = { \ - .normal_i2c = normal_i2c, \ - .probe = probe, \ - .ignore = ignore, \ - .force = force, \ - } + static unsigned short *forces[] = { \ + force, \ + NULL \ + }; \ +I2C_CLIENT_INSMOD_COMMON -/* Detect whether we are on the isa bus. If this returns true, all i2c - access will fail! */ -#define i2c_is_isa_client(clientptr) \ - ((clientptr)->adapter->algo->id == I2C_ALGO_ISA) -#define i2c_is_isa_adapter(adapptr) \ - ((adapptr)->algo->id == I2C_ALGO_ISA) +#define I2C_CLIENT_INSMOD_1(chip1) \ +enum chips { any_chip, chip1 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +static unsigned short *forces[] = { force, force_##chip1, NULL }; \ +I2C_CLIENT_INSMOD_COMMON + +#define I2C_CLIENT_INSMOD_2(chip1, chip2) \ +enum chips { any_chip, chip1, chip2 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ +static unsigned short *forces[] = { force, force_##chip1, \ + force_##chip2, NULL }; \ +I2C_CLIENT_INSMOD_COMMON + +#define I2C_CLIENT_INSMOD_3(chip1, chip2, chip3) \ +enum chips { any_chip, chip1, chip2, chip3 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ +static unsigned short *forces[] = { force, force_##chip1, \ + force_##chip2, force_##chip3, \ + NULL }; \ +I2C_CLIENT_INSMOD_COMMON + +#define I2C_CLIENT_INSMOD_4(chip1, chip2, chip3, chip4) \ +enum chips { any_chip, chip1, chip2, chip3, chip4 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ +static unsigned short *forces[] = { force, force_##chip1, \ + force_##chip2, force_##chip3, \ + force_##chip4, NULL}; \ +I2C_CLIENT_INSMOD_COMMON + +#define I2C_CLIENT_INSMOD_5(chip1, chip2, chip3, chip4, chip5) \ +enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ +static unsigned short *forces[] = { force, force_##chip1, \ + force_##chip2, force_##chip3, \ + force_##chip4, force_##chip5, \ + NULL }; \ +I2C_CLIENT_INSMOD_COMMON + +#define I2C_CLIENT_INSMOD_6(chip1, chip2, chip3, chip4, chip5, chip6) \ +enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip6); \ +static unsigned short *forces[] = { force, force_##chip1, \ + force_##chip2, force_##chip3, \ + force_##chip4, force_##chip5, \ + force_##chip6, NULL }; \ +I2C_CLIENT_INSMOD_COMMON + +#define I2C_CLIENT_INSMOD_7(chip1, chip2, chip3, chip4, chip5, chip6, chip7) \ +enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \ + chip7 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip6); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip7); \ +static unsigned short *forces[] = { force, force_##chip1, \ + force_##chip2, force_##chip3, \ + force_##chip4, force_##chip5, \ + force_##chip6, force_##chip7, \ + NULL }; \ +I2C_CLIENT_INSMOD_COMMON + +#define I2C_CLIENT_INSMOD_8(chip1, chip2, chip3, chip4, chip5, chip6, chip7, chip8) \ +enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \ + chip7, chip8 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip6); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip7); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip8); \ +static unsigned short *forces[] = { force, force_##chip1, \ + force_##chip2, force_##chip3, \ + force_##chip4, force_##chip5, \ + force_##chip6, force_##chip7, \ + force_##chip8, NULL }; \ +I2C_CLIENT_INSMOD_COMMON #endif /* _LINUX_I2C_H */ diff --git a/include/media/id.h b/include/media/id.h index a39a6423914b..801ddef301aa 100644 --- a/include/media/id.h +++ b/include/media/id.h @@ -34,8 +34,3 @@ #ifndef I2C_DRIVERID_SAA6752HS # define I2C_DRIVERID_SAA6752HS I2C_DRIVERID_EXP0+8 #endif - -/* algorithms */ -#ifndef I2C_ALGO_SAA7134 -# define I2C_ALGO_SAA7134 0x090000 -#endif