mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-02 16:44:10 +08:00
ab8500-charger: AB8500 charger driver
This driver is responsible for detecting the ac/usb plugin and also includes function to enable ac/usb charging and re-kick the watchdog. It registers with the power supply class and provides information to the user space. The information include status of ac/usb charger device. This information in turn will be used by the abx500 charging algorithm driver to enable/disable and monitor charging. Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
This commit is contained in:
Arun Murthy
Anton Vorontsov
parent
1668f81159
commit
84edbeeab6
2789
drivers/power/ab8500_charger.c
Normal file
2789
drivers/power/ab8500_charger.c
Normal file
File diff suppressed because it is too large
Load Diff
554
include/linux/mfd/abx500/ab8500-bm.h
Normal file
554
include/linux/mfd/abx500/ab8500-bm.h
Normal file
@ -0,0 +1,554 @@
|
|||||||
|
/*
|
||||||
|
* Copyright ST-Ericsson 2012.
|
||||||
|
*
|
||||||
|
* Author: Arun Murthy <arun.murthy@stericsson.com>
|
||||||
|
* Licensed under GPLv2.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef _AB8500_BM_H
|
||||||
|
#define _AB8500_BM_H
|
||||||
|
|
||||||
|
#include <linux/kernel.h>
|
||||||
|
|
||||||
|
/*
|
||||||
|
* System control 2 register offsets.
|
||||||
|
* bank = 0x02
|
||||||
|
*/
|
||||||
|
#define AB8500_MAIN_WDOG_CTRL_REG 0x01
|
||||||
|
#define AB8500_LOW_BAT_REG 0x03
|
||||||
|
#define AB8500_BATT_OK_REG 0x04
|
||||||
|
/*
|
||||||
|
* USB/ULPI register offsets
|
||||||
|
* Bank : 0x5
|
||||||
|
*/
|
||||||
|
#define AB8500_USB_LINE_STAT_REG 0x80
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Charger / status register offfsets
|
||||||
|
* Bank : 0x0B
|
||||||
|
*/
|
||||||
|
#define AB8500_CH_STATUS1_REG 0x00
|
||||||
|
#define AB8500_CH_STATUS2_REG 0x01
|
||||||
|
#define AB8500_CH_USBCH_STAT1_REG 0x02
|
||||||
|
#define AB8500_CH_USBCH_STAT2_REG 0x03
|
||||||
|
#define AB8500_CH_FSM_STAT_REG 0x04
|
||||||
|
#define AB8500_CH_STAT_REG 0x05
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Charger / control register offfsets
|
||||||
|
* Bank : 0x0B
|
||||||
|
*/
|
||||||
|
#define AB8500_CH_VOLT_LVL_REG 0x40
|
||||||
|
#define AB8500_CH_VOLT_LVL_MAX_REG 0x41 /*Only in Cut2.0*/
|
||||||
|
#define AB8500_CH_OPT_CRNTLVL_REG 0x42
|
||||||
|
#define AB8500_CH_OPT_CRNTLVL_MAX_REG 0x43 /*Only in Cut2.0*/
|
||||||
|
#define AB8500_CH_WD_TIMER_REG 0x50
|
||||||
|
#define AB8500_CHARG_WD_CTRL 0x51
|
||||||
|
#define AB8500_BTEMP_HIGH_TH 0x52
|
||||||
|
#define AB8500_LED_INDICATOR_PWM_CTRL 0x53
|
||||||
|
#define AB8500_LED_INDICATOR_PWM_DUTY 0x54
|
||||||
|
#define AB8500_BATT_OVV 0x55
|
||||||
|
#define AB8500_CHARGER_CTRL 0x56
|
||||||
|
#define AB8500_BAT_CTRL_CURRENT_SOURCE 0x60 /*Only in Cut2.0*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Charger / main control register offsets
|
||||||
|
* Bank : 0x0B
|
||||||
|
*/
|
||||||
|
#define AB8500_MCH_CTRL1 0x80
|
||||||
|
#define AB8500_MCH_CTRL2 0x81
|
||||||
|
#define AB8500_MCH_IPT_CURLVL_REG 0x82
|
||||||
|
#define AB8500_CH_WD_REG 0x83
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Charger / USB control register offsets
|
||||||
|
* Bank : 0x0B
|
||||||
|
*/
|
||||||
|
#define AB8500_USBCH_CTRL1_REG 0xC0
|
||||||
|
#define AB8500_USBCH_CTRL2_REG 0xC1
|
||||||
|
#define AB8500_USBCH_IPT_CRNTLVL_REG 0xC2
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Gas Gauge register offsets
|
||||||
|
* Bank : 0x0C
|
||||||
|
*/
|
||||||
|
#define AB8500_GASG_CC_CTRL_REG 0x00
|
||||||
|
#define AB8500_GASG_CC_ACCU1_REG 0x01
|
||||||
|
#define AB8500_GASG_CC_ACCU2_REG 0x02
|
||||||
|
#define AB8500_GASG_CC_ACCU3_REG 0x03
|
||||||
|
#define AB8500_GASG_CC_ACCU4_REG 0x04
|
||||||
|
#define AB8500_GASG_CC_SMPL_CNTRL_REG 0x05
|
||||||
|
#define AB8500_GASG_CC_SMPL_CNTRH_REG 0x06
|
||||||
|
#define AB8500_GASG_CC_SMPL_CNVL_REG 0x07
|
||||||
|
#define AB8500_GASG_CC_SMPL_CNVH_REG 0x08
|
||||||
|
#define AB8500_GASG_CC_CNTR_AVGOFF_REG 0x09
|
||||||
|
#define AB8500_GASG_CC_OFFSET_REG 0x0A
|
||||||
|
#define AB8500_GASG_CC_NCOV_ACCU 0x10
|
||||||
|
#define AB8500_GASG_CC_NCOV_ACCU_CTRL 0x11
|
||||||
|
#define AB8500_GASG_CC_NCOV_ACCU_LOW 0x12
|
||||||
|
#define AB8500_GASG_CC_NCOV_ACCU_MED 0x13
|
||||||
|
#define AB8500_GASG_CC_NCOV_ACCU_HIGH 0x14
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Interrupt register offsets
|
||||||
|
* Bank : 0x0E
|
||||||
|
*/
|
||||||
|
#define AB8500_IT_SOURCE2_REG 0x01
|
||||||
|
#define AB8500_IT_SOURCE21_REG 0x14
|
||||||
|
|
||||||
|
/*
|
||||||
|
* RTC register offsets
|
||||||
|
* Bank: 0x0F
|
||||||
|
*/
|
||||||
|
#define AB8500_RTC_BACKUP_CHG_REG 0x0C
|
||||||
|
#define AB8500_RTC_CC_CONF_REG 0x01
|
||||||
|
#define AB8500_RTC_CTRL_REG 0x0B
|
||||||
|
|
||||||
|
/*
|
||||||
|
* OTP register offsets
|
||||||
|
* Bank : 0x15
|
||||||
|
*/
|
||||||
|
#define AB8500_OTP_CONF_15 0x0E
|
||||||
|
|
||||||
|
/* GPADC constants from AB8500 spec, UM0836 */
|
||||||
|
#define ADC_RESOLUTION 1024
|
||||||
|
#define ADC_CH_MAIN_MIN 0
|
||||||
|
#define ADC_CH_MAIN_MAX 20030
|
||||||
|
#define ADC_CH_VBUS_MIN 0
|
||||||
|
#define ADC_CH_VBUS_MAX 20030
|
||||||
|
#define ADC_CH_VBAT_MIN 2300
|
||||||
|
#define ADC_CH_VBAT_MAX 4800
|
||||||
|
#define ADC_CH_BKBAT_MIN 0
|
||||||
|
#define ADC_CH_BKBAT_MAX 3200
|
||||||
|
|
||||||
|
/* Main charge i/p current */
|
||||||
|
#define MAIN_CH_IP_CUR_0P9A 0x80
|
||||||
|
#define MAIN_CH_IP_CUR_1P0A 0x90
|
||||||
|
#define MAIN_CH_IP_CUR_1P1A 0xA0
|
||||||
|
#define MAIN_CH_IP_CUR_1P2A 0xB0
|
||||||
|
#define MAIN_CH_IP_CUR_1P3A 0xC0
|
||||||
|
#define MAIN_CH_IP_CUR_1P4A 0xD0
|
||||||
|
#define MAIN_CH_IP_CUR_1P5A 0xE0
|
||||||
|
|
||||||
|
/* ChVoltLevel */
|
||||||
|
#define CH_VOL_LVL_3P5 0x00
|
||||||
|
#define CH_VOL_LVL_4P0 0x14
|
||||||
|
#define CH_VOL_LVL_4P05 0x16
|
||||||
|
#define CH_VOL_LVL_4P1 0x1B
|
||||||
|
#define CH_VOL_LVL_4P15 0x20
|
||||||
|
#define CH_VOL_LVL_4P2 0x25
|
||||||
|
#define CH_VOL_LVL_4P6 0x4D
|
||||||
|
|
||||||
|
/* ChOutputCurrentLevel */
|
||||||
|
#define CH_OP_CUR_LVL_0P1 0x00
|
||||||
|
#define CH_OP_CUR_LVL_0P2 0x01
|
||||||
|
#define CH_OP_CUR_LVL_0P3 0x02
|
||||||
|
#define CH_OP_CUR_LVL_0P4 0x03
|
||||||
|
#define CH_OP_CUR_LVL_0P5 0x04
|
||||||
|
#define CH_OP_CUR_LVL_0P6 0x05
|
||||||
|
#define CH_OP_CUR_LVL_0P7 0x06
|
||||||
|
#define CH_OP_CUR_LVL_0P8 0x07
|
||||||
|
#define CH_OP_CUR_LVL_0P9 0x08
|
||||||
|
#define CH_OP_CUR_LVL_1P4 0x0D
|
||||||
|
#define CH_OP_CUR_LVL_1P5 0x0E
|
||||||
|
#define CH_OP_CUR_LVL_1P6 0x0F
|
||||||
|
|
||||||
|
/* BTEMP High thermal limits */
|
||||||
|
#define BTEMP_HIGH_TH_57_0 0x00
|
||||||
|
#define BTEMP_HIGH_TH_52 0x01
|
||||||
|
#define BTEMP_HIGH_TH_57_1 0x02
|
||||||
|
#define BTEMP_HIGH_TH_62 0x03
|
||||||
|
|
||||||
|
/* current is mA */
|
||||||
|
#define USB_0P1A 100
|
||||||
|
#define USB_0P2A 200
|
||||||
|
#define USB_0P3A 300
|
||||||
|
#define USB_0P4A 400
|
||||||
|
#define USB_0P5A 500
|
||||||
|
|
||||||
|
#define LOW_BAT_3P1V 0x20
|
||||||
|
#define LOW_BAT_2P3V 0x00
|
||||||
|
#define LOW_BAT_RESET 0x01
|
||||||
|
#define LOW_BAT_ENABLE 0x01
|
||||||
|
|
||||||
|
/* Backup battery constants */
|
||||||
|
#define BUP_ICH_SEL_50UA 0x00
|
||||||
|
#define BUP_ICH_SEL_150UA 0x04
|
||||||
|
#define BUP_ICH_SEL_300UA 0x08
|
||||||
|
#define BUP_ICH_SEL_700UA 0x0C
|
||||||
|
|
||||||
|
#define BUP_VCH_SEL_2P5V 0x00
|
||||||
|
#define BUP_VCH_SEL_2P6V 0x01
|
||||||
|
#define BUP_VCH_SEL_2P8V 0x02
|
||||||
|
#define BUP_VCH_SEL_3P1V 0x03
|
||||||
|
|
||||||
|
/* Battery OVV constants */
|
||||||
|
#define BATT_OVV_ENA 0x02
|
||||||
|
#define BATT_OVV_TH_3P7 0x00
|
||||||
|
#define BATT_OVV_TH_4P75 0x01
|
||||||
|
|
||||||
|
/* A value to indicate over voltage */
|
||||||
|
#define BATT_OVV_VALUE 4750
|
||||||
|
|
||||||
|
/* VBUS OVV constants */
|
||||||
|
#define VBUS_OVV_SELECT_MASK 0x78
|
||||||
|
#define VBUS_OVV_SELECT_5P6V 0x00
|
||||||
|
#define VBUS_OVV_SELECT_5P7V 0x08
|
||||||
|
#define VBUS_OVV_SELECT_5P8V 0x10
|
||||||
|
#define VBUS_OVV_SELECT_5P9V 0x18
|
||||||
|
#define VBUS_OVV_SELECT_6P0V 0x20
|
||||||
|
#define VBUS_OVV_SELECT_6P1V 0x28
|
||||||
|
#define VBUS_OVV_SELECT_6P2V 0x30
|
||||||
|
#define VBUS_OVV_SELECT_6P3V 0x38
|
||||||
|
|
||||||
|
#define VBUS_AUTO_IN_CURR_LIM_ENA 0x04
|
||||||
|
|
||||||
|
/* Fuel Gauge constants */
|
||||||
|
#define RESET_ACCU 0x02
|
||||||
|
#define READ_REQ 0x01
|
||||||
|
#define CC_DEEP_SLEEP_ENA 0x02
|
||||||
|
#define CC_PWR_UP_ENA 0x01
|
||||||
|
#define CC_SAMPLES_40 0x28
|
||||||
|
#define RD_NCONV_ACCU_REQ 0x01
|
||||||
|
#define CC_CALIB 0x08
|
||||||
|
#define CC_INTAVGOFFSET_ENA 0x10
|
||||||
|
#define CC_MUXOFFSET 0x80
|
||||||
|
#define CC_INT_CAL_N_AVG_MASK 0x60
|
||||||
|
#define CC_INT_CAL_SAMPLES_16 0x40
|
||||||
|
#define CC_INT_CAL_SAMPLES_8 0x20
|
||||||
|
#define CC_INT_CAL_SAMPLES_4 0x00
|
||||||
|
|
||||||
|
/* RTC constants */
|
||||||
|
#define RTC_BUP_CH_ENA 0x10
|
||||||
|
|
||||||
|
/* BatCtrl Current Source Constants */
|
||||||
|
#define BAT_CTRL_7U_ENA 0x01
|
||||||
|
#define BAT_CTRL_20U_ENA 0x02
|
||||||
|
#define BAT_CTRL_CMP_ENA 0x04
|
||||||
|
#define FORCE_BAT_CTRL_CMP_HIGH 0x08
|
||||||
|
#define BAT_CTRL_PULL_UP_ENA 0x10
|
||||||
|
|
||||||
|
/* Battery type */
|
||||||
|
#define BATTERY_UNKNOWN 00
|
||||||
|
|
||||||
|
/*
|
||||||
|
* ADC for the battery thermistor.
|
||||||
|
* When using the ADC_THERM_BATCTRL the battery ID resistor is combined with
|
||||||
|
* a NTC resistor to both identify the battery and to measure its temperature.
|
||||||
|
* Different phone manufactures uses different techniques to both identify the
|
||||||
|
* battery and to read its temperature.
|
||||||
|
*/
|
||||||
|
enum adc_therm {
|
||||||
|
ADC_THERM_BATCTRL,
|
||||||
|
ADC_THERM_BATTEMP,
|
||||||
|
};
|
||||||
|
|
||||||
|
/**
|
||||||
|
* struct res_to_temp - defines one point in a temp to res curve. To
|
||||||
|
* be used in battery packs that combines the identification resistor with a
|
||||||
|
* NTC resistor.
|
||||||
|
* @temp: battery pack temperature in Celcius
|
||||||
|
* @resist: NTC resistor net total resistance
|
||||||
|
*/
|
||||||
|
struct res_to_temp {
|
||||||
|
int temp;
|
||||||
|
int resist;
|
||||||
|
};
|
||||||
|
|
||||||
|
/**
|
||||||
|
* struct batres_vs_temp - defines one point in a temp vs battery internal
|
||||||
|
* resistance curve.
|
||||||
|
* @temp: battery pack temperature in Celcius
|
||||||
|
* @resist: battery internal reistance in mOhm
|
||||||
|
*/
|
||||||
|
struct batres_vs_temp {
|
||||||
|
int temp;
|
||||||
|
int resist;
|
||||||
|
};
|
||||||
|
|
||||||
|
/**
|
||||||
|
* struct v_to_cap - Table for translating voltage to capacity
|
||||||
|
* @voltage: Voltage in mV
|
||||||
|
* @capacity: Capacity in percent
|
||||||
|
*/
|
||||||
|
struct v_to_cap {
|
||||||
|
int voltage;
|
||||||
|
int capacity;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Forward declaration */
|
||||||
|
struct ab8500_fg;
|
||||||
|
|
||||||
|
/**
|
||||||
|
* struct ab8500_fg_parameters - Fuel gauge algorithm parameters, in seconds
|
||||||
|
* if not specified
|
||||||
|
* @recovery_sleep_timer: Time between measurements while recovering
|
||||||
|
* @recovery_total_time: Total recovery time
|
||||||
|
* @init_timer: Measurement interval during startup
|
||||||
|
* @init_discard_time: Time we discard voltage measurement at startup
|
||||||
|
* @init_total_time: Total init time during startup
|
||||||
|
* @high_curr_time: Time current has to be high to go to recovery
|
||||||
|
* @accu_charging: FG accumulation time while charging
|
||||||
|
* @accu_high_curr: FG accumulation time in high current mode
|
||||||
|
* @high_curr_threshold: High current threshold, in mA
|
||||||
|
* @lowbat_threshold: Low battery threshold, in mV
|
||||||
|
* @battok_falling_th_sel0 Threshold in mV for battOk signal sel0
|
||||||
|
* Resolution in 50 mV step.
|
||||||
|
* @battok_raising_th_sel1 Threshold in mV for battOk signal sel1
|
||||||
|
* Resolution in 50 mV step.
|
||||||
|
* @user_cap_limit Capacity reported from user must be within this
|
||||||
|
* limit to be considered as sane, in percentage
|
||||||
|
* points.
|
||||||
|
* @maint_thres This is the threshold where we stop reporting
|
||||||
|
* battery full while in maintenance, in per cent
|
||||||
|
*/
|
||||||
|
struct ab8500_fg_parameters {
|
||||||
|
int recovery_sleep_timer;
|
||||||
|
int recovery_total_time;
|
||||||
|
int init_timer;
|
||||||
|
int init_discard_time;
|
||||||
|
int init_total_time;
|
||||||
|
int high_curr_time;
|
||||||
|
int accu_charging;
|
||||||
|
int accu_high_curr;
|
||||||
|
int high_curr_threshold;
|
||||||
|
int lowbat_threshold;
|
||||||
|
int battok_falling_th_sel0;
|
||||||
|
int battok_raising_th_sel1;
|
||||||
|
int user_cap_limit;
|
||||||
|
int maint_thres;
|
||||||
|
};
|
||||||
|
|
||||||
|
/**
|
||||||
|
* struct ab8500_charger_maximization - struct used by the board config.
|
||||||
|
* @use_maxi: Enable maximization for this battery type
|
||||||
|
* @maxi_chg_curr: Maximum charger current allowed
|
||||||
|
* @maxi_wait_cycles: cycles to wait before setting charger current
|
||||||
|
* @charger_curr_step delta between two charger current settings (mA)
|
||||||
|
*/
|
||||||
|
struct ab8500_maxim_parameters {
|
||||||
|
bool ena_maxi;
|
||||||
|
int chg_curr;
|
||||||
|
int wait_cycles;
|
||||||
|
int charger_curr_step;
|
||||||
|
};
|
||||||
|
|
||||||
|
/**
|
||||||
|
* struct battery_type - different batteries supported
|
||||||
|
* @name: battery technology
|
||||||
|
* @resis_high: battery upper resistance limit
|
||||||
|
* @resis_low: battery lower resistance limit
|
||||||
|
* @charge_full_design: Maximum battery capacity in mAh
|
||||||
|
* @nominal_voltage: Nominal voltage of the battery in mV
|
||||||
|
* @termination_vol: max voltage upto which battery can be charged
|
||||||
|
* @termination_curr battery charging termination current in mA
|
||||||
|
* @recharge_vol battery voltage limit that will trigger a new
|
||||||
|
* full charging cycle in the case where maintenan-
|
||||||
|
* -ce charging has been disabled
|
||||||
|
* @normal_cur_lvl: charger current in normal state in mA
|
||||||
|
* @normal_vol_lvl: charger voltage in normal state in mV
|
||||||
|
* @maint_a_cur_lvl: charger current in maintenance A state in mA
|
||||||
|
* @maint_a_vol_lvl: charger voltage in maintenance A state in mV
|
||||||
|
* @maint_a_chg_timer_h: charge time in maintenance A state
|
||||||
|
* @maint_b_cur_lvl: charger current in maintenance B state in mA
|
||||||
|
* @maint_b_vol_lvl: charger voltage in maintenance B state in mV
|
||||||
|
* @maint_b_chg_timer_h: charge time in maintenance B state
|
||||||
|
* @low_high_cur_lvl: charger current in temp low/high state in mA
|
||||||
|
* @low_high_vol_lvl: charger voltage in temp low/high state in mV'
|
||||||
|
* @battery_resistance: battery inner resistance in mOhm.
|
||||||
|
* @n_r_t_tbl_elements: number of elements in r_to_t_tbl
|
||||||
|
* @r_to_t_tbl: table containing resistance to temp points
|
||||||
|
* @n_v_cap_tbl_elements: number of elements in v_to_cap_tbl
|
||||||
|
* @v_to_cap_tbl: Voltage to capacity (in %) table
|
||||||
|
* @n_batres_tbl_elements number of elements in the batres_tbl
|
||||||
|
* @batres_tbl battery internal resistance vs temperature table
|
||||||
|
*/
|
||||||
|
struct battery_type {
|
||||||
|
int name;
|
||||||
|
int resis_high;
|
||||||
|
int resis_low;
|
||||||
|
int charge_full_design;
|
||||||
|
int nominal_voltage;
|
||||||
|
int termination_vol;
|
||||||
|
int termination_curr;
|
||||||
|
int recharge_vol;
|
||||||
|
int normal_cur_lvl;
|
||||||
|
int normal_vol_lvl;
|
||||||
|
int maint_a_cur_lvl;
|
||||||
|
int maint_a_vol_lvl;
|
||||||
|
int maint_a_chg_timer_h;
|
||||||
|
int maint_b_cur_lvl;
|
||||||
|
int maint_b_vol_lvl;
|
||||||
|
int maint_b_chg_timer_h;
|
||||||
|
int low_high_cur_lvl;
|
||||||
|
int low_high_vol_lvl;
|
||||||
|
int battery_resistance;
|
||||||
|
int n_temp_tbl_elements;
|
||||||
|
struct res_to_temp *r_to_t_tbl;
|
||||||
|
int n_v_cap_tbl_elements;
|
||||||
|
struct v_to_cap *v_to_cap_tbl;
|
||||||
|
int n_batres_tbl_elements;
|
||||||
|
struct batres_vs_temp *batres_tbl;
|
||||||
|
};
|
||||||
|
|
||||||
|
/**
|
||||||
|
* struct ab8500_bm_capacity_levels - ab8500 capacity level data
|
||||||
|
* @critical: critical capacity level in percent
|
||||||
|
* @low: low capacity level in percent
|
||||||
|
* @normal: normal capacity level in percent
|
||||||
|
* @high: high capacity level in percent
|
||||||
|
* @full: full capacity level in percent
|
||||||
|
*/
|
||||||
|
struct ab8500_bm_capacity_levels {
|
||||||
|
int critical;
|
||||||
|
int low;
|
||||||
|
int normal;
|
||||||
|
int high;
|
||||||
|
int full;
|
||||||
|
};
|
||||||
|
|
||||||
|
/**
|
||||||
|
* struct ab8500_bm_charger_parameters - Charger specific parameters
|
||||||
|
* @usb_volt_max: maximum allowed USB charger voltage in mV
|
||||||
|
* @usb_curr_max: maximum allowed USB charger current in mA
|
||||||
|
* @ac_volt_max: maximum allowed AC charger voltage in mV
|
||||||
|
* @ac_curr_max: maximum allowed AC charger current in mA
|
||||||
|
*/
|
||||||
|
struct ab8500_bm_charger_parameters {
|
||||||
|
int usb_volt_max;
|
||||||
|
int usb_curr_max;
|
||||||
|
int ac_volt_max;
|
||||||
|
int ac_curr_max;
|
||||||
|
};
|
||||||
|
|
||||||
|
/**
|
||||||
|
* struct ab8500_bm_data - ab8500 battery management data
|
||||||
|
* @temp_under under this temp, charging is stopped
|
||||||
|
* @temp_low between this temp and temp_under charging is reduced
|
||||||
|
* @temp_high between this temp and temp_over charging is reduced
|
||||||
|
* @temp_over over this temp, charging is stopped
|
||||||
|
* @temp_interval_chg temperature measurement interval in s when charging
|
||||||
|
* @temp_interval_nochg temperature measurement interval in s when not charging
|
||||||
|
* @main_safety_tmr_h safety timer for main charger
|
||||||
|
* @usb_safety_tmr_h safety timer for usb charger
|
||||||
|
* @bkup_bat_v voltage which we charge the backup battery with
|
||||||
|
* @bkup_bat_i current which we charge the backup battery with
|
||||||
|
* @no_maintenance indicates that maintenance charging is disabled
|
||||||
|
* @adc_therm placement of thermistor, batctrl or battemp adc
|
||||||
|
* @chg_unknown_bat flag to enable charging of unknown batteries
|
||||||
|
* @enable_overshoot flag to enable VBAT overshoot control
|
||||||
|
* @fg_res resistance of FG resistor in 0.1mOhm
|
||||||
|
* @n_btypes number of elements in array bat_type
|
||||||
|
* @batt_id index of the identified battery in array bat_type
|
||||||
|
* @interval_charging charge alg cycle period time when charging (sec)
|
||||||
|
* @interval_not_charging charge alg cycle period time when not charging (sec)
|
||||||
|
* @temp_hysteresis temperature hysteresis
|
||||||
|
* @gnd_lift_resistance Battery ground to phone ground resistance (mOhm)
|
||||||
|
* @maxi: maximization parameters
|
||||||
|
* @cap_levels capacity in percent for the different capacity levels
|
||||||
|
* @bat_type table of supported battery types
|
||||||
|
* @chg_params charger parameters
|
||||||
|
* @fg_params fuel gauge parameters
|
||||||
|
*/
|
||||||
|
struct ab8500_bm_data {
|
||||||
|
int temp_under;
|
||||||
|
int temp_low;
|
||||||
|
int temp_high;
|
||||||
|
int temp_over;
|
||||||
|
int temp_interval_chg;
|
||||||
|
int temp_interval_nochg;
|
||||||
|
int main_safety_tmr_h;
|
||||||
|
int usb_safety_tmr_h;
|
||||||
|
int bkup_bat_v;
|
||||||
|
int bkup_bat_i;
|
||||||
|
bool no_maintenance;
|
||||||
|
bool chg_unknown_bat;
|
||||||
|
bool enable_overshoot;
|
||||||
|
enum adc_therm adc_therm;
|
||||||
|
int fg_res;
|
||||||
|
int n_btypes;
|
||||||
|
int batt_id;
|
||||||
|
int interval_charging;
|
||||||
|
int interval_not_charging;
|
||||||
|
int temp_hysteresis;
|
||||||
|
int gnd_lift_resistance;
|
||||||
|
const struct ab8500_maxim_parameters *maxi;
|
||||||
|
const struct ab8500_bm_capacity_levels *cap_levels;
|
||||||
|
const struct battery_type *bat_type;
|
||||||
|
const struct ab8500_bm_charger_parameters *chg_params;
|
||||||
|
const struct ab8500_fg_parameters *fg_params;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct ab8500_charger_platform_data {
|
||||||
|
char **supplied_to;
|
||||||
|
size_t num_supplicants;
|
||||||
|
bool autopower_cfg;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct ab8500_btemp_platform_data {
|
||||||
|
char **supplied_to;
|
||||||
|
size_t num_supplicants;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct ab8500_fg_platform_data {
|
||||||
|
char **supplied_to;
|
||||||
|
size_t num_supplicants;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct ab8500_chargalg_platform_data {
|
||||||
|
char **supplied_to;
|
||||||
|
size_t num_supplicants;
|
||||||
|
};
|
||||||
|
struct ab8500_btemp;
|
||||||
|
struct ab8500_gpadc;
|
||||||
|
struct ab8500_fg;
|
||||||
|
#ifdef CONFIG_AB8500_BM
|
||||||
|
void ab8500_fg_reinit(void);
|
||||||
|
void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA);
|
||||||
|
struct ab8500_btemp *ab8500_btemp_get(void);
|
||||||
|
int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp);
|
||||||
|
struct ab8500_fg *ab8500_fg_get(void);
|
||||||
|
int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev);
|
||||||
|
int ab8500_fg_inst_curr_start(struct ab8500_fg *di);
|
||||||
|
int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res);
|
||||||
|
int ab8500_fg_inst_curr_done(struct ab8500_fg *di);
|
||||||
|
|
||||||
|
#else
|
||||||
|
int ab8500_fg_inst_curr_done(struct ab8500_fg *di)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
static void ab8500_fg_reinit(void)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
static void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
static struct ab8500_btemp *ab8500_btemp_get(void)
|
||||||
|
{
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
static int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp)
|
||||||
|
{
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
struct ab8500_fg *ab8500_fg_get(void)
|
||||||
|
{
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
static int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev)
|
||||||
|
{
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline int ab8500_fg_inst_curr_start(struct ab8500_fg *di)
|
||||||
|
{
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
|
||||||
|
{
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif
|
||||||
|
#endif /* _AB8500_BM_H */
|
||||||
Loading…
Reference in New Issue
Block a user