thermal/drivers/sun8i: Add support for H616 THS controller

Add support for the thermal sensor found in H616 SoCs, is the same as
the H6 thermal sensor controller, but with four sensors.
Also the registers readings are wrong, unless a bit in the first SYS_CFG
register cleared, so set exercise the SRAM regmap to take care of that.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240219153639.179814-7-andre.przywara@arm.com
This commit is contained in:
Martin Botka 2024-02-19 15:36:38 +00:00 committed by Daniel Lezcano
parent bd0b451bd4
commit 83620b3b04

View File

@ -684,6 +684,20 @@ static const struct ths_thermal_chip sun20i_d1_ths = {
.calc_temp = sun8i_ths_calc_temp,
};
static const struct ths_thermal_chip sun50i_h616_ths = {
.sensor_num = 4,
.has_bus_clk_reset = true,
.needs_sram = true,
.ft_deviation = 8000,
.offset = 263655,
.scale = 810,
.temp_data_base = SUN50I_H6_THS_TEMP_DATA,
.calibrate = sun50i_h6_ths_calibrate,
.init = sun50i_h6_thermal_init,
.irq_ack = sun50i_h6_irq_ack,
.calc_temp = sun8i_ths_calc_temp,
};
static const struct of_device_id of_ths_match[] = {
{ .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths },
{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
@ -693,6 +707,7 @@ static const struct of_device_id of_ths_match[] = {
{ .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
{ .compatible = "allwinner,sun20i-d1-ths", .data = &sun20i_d1_ths },
{ .compatible = "allwinner,sun50i-h616-ths", .data = &sun50i_h616_ths },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, of_ths_match);