ARM/arm64: SoC platform updates for v4.14

This branch contains platform updates for 32- and 64-bit ARM,
 including defconfig updates to enable new options, drivers and
 platforms. There are also a few fixes and cleanups for some existing vendors.
 
 Some of the things worth highlighting here are:
 
  - Enabling new crypt drivers on arm64 defconfig
  - QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
  - Debug support enabled for Renesas r8a7743
  - Various config updates for Renesas platforms (sound, USB, other drivers)
  - Platform support (including SMP) for TI dra762
  - OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZtdXjAAoJEIwa5zzehBx3ExIQAJQ6anSZlkGysXqptA4c1HuL
 vgGq/U5xZ1Wa4Z/YX7//wuCMwRClc1j/zSJ5PP+wP0YsaviN7iF/8H1P/HQtCiTT
 DcEQPSI770829wzW4oMNW0PyU/ZnWMtuiMB+FAjdPVjbS8bT4PIK72D8PYKrT7f8
 8bU51+QezjSLamQaA8S2RyX+kYI/4znTa/9Aco4AlCtioV8h9gQanFYd2EI/EMhU
 1uvR3xUFf/YK49+M5J6m3DvtFffllHU9TKV/EAQD1Bhl1s5VPfem+a8JbVh1m7M+
 NzQOOoPJ9jYOGfjlaQQVmZ/1E4iKac1oK4x44Djk/i+RFjl+AT/2co3RcaEq9Npw
 5HNsK8ujnjzWB3xHu5wK5CbrjLNYco9hOpJaGkSeClo4ElDJVSKxyqWkZuhhnSA8
 bXXV5VraMX67tjG7Ou8+NtdbMkGdOUqnNbuBlCxkxpWxhtaUQG1YHHQDofUXNguy
 rtVhKRZRSkNYrp4lDCKCXVFFO077FGzP2Boq6JVzLv+U1l6JlZkkr3EWKYMY45HC
 o2rVcAB4lMR/k6tqE5MAmQC53jCNlFZt2xtf1WRVKf+0TfBVIGX3MxvFxl4E9wA+
 9pdJ9ujZWsPjTcZcktA6AsaK7uevRxcB2YZYv4pXVjR1RcZ/SfiEf4UW+md3j4QB
 igKej5WsRiCPwnkMFKs0
 =g8cF
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch
  contains platform updates for 32- and 64-bit ARM, including defconfig
  updates to enable new options, drivers and platforms. There are also a
  few fixes and cleanups for some existing vendors.

  Some of the things worth highlighting here are:

   - Enabling new crypt drivers on arm64 defconfig

   - QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig

   - Debug support enabled for Renesas r8a7743

   - Various config updates for Renesas platforms (sound, USB, other
     drivers)

   - Platform support (including SMP) for TI dra762

   - OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale
     DMA code"

* tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
  ARM: multi_v7_defconfig: make eSDHC driver built-in
  arm64: defconfig: enable rockchip graphics
  MAINTAINERS: Update Cavium ThunderX2 entry
  ARM: config: aspeed: Add I2C, VUART, LPC Snoop
  ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
  ARM: s3c24xx: Fix NAND ECC mode for mini2440 board
  ARM: davinci_all_defconfig: enable tinydrm and ST7586
  arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
  ARM: defconfig: tegra: Enable ChipIdea UDC driver
  ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
  ARM: tegra: Add Tegra I2S interfaces to defconfig
  ARM: tegra: Update default configuration for v4.13-rc1
  MAINTAINERS: update ARM/ZTE entry
  soc: versatile: remove unnecessary static in realview_soc_probe()
  ARM: Convert to using %pOF instead of full_name
  ARM: hisi: Fix typo in comment
  ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
  arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
  arm64: defconfig: add recently added crypto drivers as modules
  arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG
  ...

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -80,6 +80,9 @@ SoCs:
 - OMAP5432
   compatible = "ti,omap5432", "ti,omap5"
 
+- DRA762
+  compatible = "ti,dra762", "ti,dra7"
+
 - DRA742
   compatible = "ti,dra742", "ti,dra74", "ti,dra7"
 

MAINTAINERS

@@ -2101,17 +2101,38 @@ F:	arch/arm/mach-pxa/include/mach/z2.h
 ARM/ZTE ARCHITECTURE
 M:	Jun Nie <jun.nie@linaro.org>
 M:	Baoyou Xie <baoyou.xie@linaro.org>
+M:	Shawn Guo <shawnguo@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	arch/arm/boot/dts/zx2967*
 F:	arch/arm/mach-zx/
+F:	arch/arm64/boot/dts/zte/
 F:	drivers/clk/zte/
+F:	drivers/dma/zx_dma.c
+F:	drivers/gpio/gpio-zx.c
+F:	drivers/i2c/busses/i2c-zx2967.c
+F:	drivers/mmc/host/dw_mmc-zx.*
+F:	drivers/pinctrl/zte/
 F:	drivers/reset/reset-zx2967.c
 F:	drivers/soc/zte/
+F:	drivers/thermal/zx2967_thermal.c
+F:	drivers/watchdog/zx2967_wdt.c
 F:	Documentation/devicetree/bindings/arm/zte.txt
-F:	Documentation/devicetree/bindings/clock/zx296702-clk.txt
+F:	Documentation/devicetree/bindings/clock/zx2967*.txt
+F:	Documentation/devicetree/bindings/dma/zxdma.txt
+F:	Documentation/devicetree/bindings/gpio/zx296702-gpio.txt
+F:	Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
+F:	Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
+F:	Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt
 F:	Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
 F:	Documentation/devicetree/bindings/soc/zte/
-F:	include/dt-bindings/soc/zx*.h
+F:	Documentation/devicetree/bindings/sound/zte,*.txt
+F:	Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
+F:	Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt
+F:	include/dt-bindings/clock/zx2967*.h
+F:	include/dt-bindings/soc/zte,*.h
+F:	sound/soc/codecs/zx_aud96p22.c
+F:	sound/soc/zte/
 
 ARM/ZYNQ ARCHITECTURE
 M:	Michal Simek <michal.simek@xilinx.com>
@@ -3175,6 +3196,7 @@ S:	Supported
 F:	drivers/crypto/cavium/cpt/
 
 CAVIUM THUNDERX2 ARM64 SOC
+M:	Robert Richter <rrichter@cavium.com>
 M:	Jayachandran C <jnair@caviumnetworks.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained

arch/arm/Kconfig.debug

@@ -646,7 +646,7 @@ choice
 	config DEBUG_OMAP2UART1
 		bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 		help
 		  This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
 		  omap3 torpedo and 3530 lv som.
@@ -654,17 +654,17 @@ choice
 	config DEBUG_OMAP2UART2
 		bool "Kernel low-level debugging messages via OMAP2/3/4 UART2"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP2UART3
 		bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP3UART3
 		bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 		help
 		  This covers at least cm_t3x, beagle, crane, devkit8000,
 		  igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
@@ -673,17 +673,17 @@ choice
 	config DEBUG_OMAP4UART3
 		bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP3UART4
 		bool "Kernel low-level debugging messages via OMAP36XX UART4"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP4UART4
 		bool "Kernel low-level debugging messages via OMAP4/5 UART4"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP7XXUART1
 		bool "Kernel low-level debugging via OMAP730 UART1"
@@ -712,22 +712,22 @@ choice
 	config DEBUG_TI81XXUART1
 		bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_TI81XXUART2
 		bool "Kernel low-level debugging messages via TI81XX UART2"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_TI81XXUART3
 		bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_AM33XXUART1
 		bool "Kernel low-level debugging messages via AM33XX UART1"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_ZOOM_UART
 		bool "Kernel low-level debugging messages via Zoom2/3 UART"
@@ -896,12 +896,13 @@ choice
 		  via SCIF2 on Renesas R-Car H1 (R8A7779).
 
 	config DEBUG_RCAR_GEN2_SCIF0
-		bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7792/R8A7793"
+		bool "Kernel low-level debugging messages via SCIF0 on R-Car Gen2 and RZ/G1"
-		depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793
+		depends on ARCH_R8A7743 || ARCH_R8A7790 || ARCH_R8A7791 || \
+			ARCH_R8A7792 || ARCH_R8A7793
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), V2H
+		  via SCIF0 on Renesas RZ/G1M (R8A7743), R-Car H2 (R8A7790),
-		  (R8A7792), or M2-N (R8A7793).
+		  M2-W (R8A7791), V2H (R8A7792), or M2-N (R8A7793).
 
 	config DEBUG_RCAR_GEN2_SCIF2
 		bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
@@ -1523,6 +1524,17 @@ config DEBUG_UART_PHYS
 	default 0x40090000 if DEBUG_LPC32XX
 	default 0x40100000 if DEBUG_PXA_UART1
 	default 0x42000000 if DEBUG_GEMINI
+	default 0x44e09000 if DEBUG_AM33XXUART1
+	default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
+	default 0x48022000 if DEBUG_TI81XXUART2
+	default 0x48024000 if DEBUG_TI81XXUART3
+	default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
+				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
+	default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
+				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+	default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
+	default 0x49020000 if DEBUG_OMAP3UART3
+	default 0x49042000 if DEBUG_OMAP3UART4
 	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
 				DEBUG_S3C2410_UART0)
 	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
@@ -1641,10 +1653,21 @@ config DEBUG_UART_VIRT
 	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
 	default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
 	default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
+	default 0xf9e09000 if DEBUG_AM33XXUART1
+	default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
+	default 0xfa022000 if DEBUG_TI81XXUART2
+	default 0xfa024000 if DEBUG_TI81XXUART3
+	default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
+				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
+	default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
+				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+	default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
 	default 0xfb002000 if DEBUG_CNS3XXX
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
+	default 0xfb020000 if DEBUG_OMAP3UART3
+	default 0xfb042000 if DEBUG_OMAP3UART4
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfc705000 if DEBUG_ZTE_ZX
 	default 0xfcfe8600 if DEBUG_BCM63XX_UART

arch/arm/boot/dts/dra71-evm.dts

@@ -191,6 +191,7 @@
 		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
 		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
 	};
 
 	dp83867_1: ethernet-phy@3 {
@@ -199,6 +200,7 @@
 		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
 		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
 	};
 };
 

arch/arm/boot/dts/dra72-evm-revc.dts

@@ -70,6 +70,7 @@
 		ti,min-output-impedance;
 		interrupt-parent = <&gpio6>;
 		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		ti,dp83867-rxctrl-strap-quirk;
 	};
 
 	dp83867_1: ethernet-phy@3 {
@@ -80,5 +81,6 @@
 		ti,min-output-impedance;
 		interrupt-parent = <&gpio6>;
 		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		ti,dp83867-rxctrl-strap-quirk;
 	};
 };

arch/arm/configs/aspeed_g4_defconfig

@@ -24,6 +24,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_ASPEED=y
 CONFIG_MACH_ASPEED_G4=y
+CONFIG_VMSPLIT_2G=y
 CONFIG_AEABI=y
 # CONFIG_CPU_SW_DOMAIN_PAN is not set
 # CONFIG_COMPACTION is not set
@@ -64,6 +65,7 @@ CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_ASPEED_LPC_CTRL=y
+CONFIG_ASPEED_LPC_SNOOP=y
 CONFIG_EEPROM_AT24=y
 CONFIG_NETDEVICES=y
 CONFIG_NETCONSOLE=y
@@ -104,6 +106,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_ASPEED_VUART=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_ASPEED_BT_IPMI_BMC=y
@@ -114,6 +117,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA9541=y
 CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_ASPEED=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_ASPEED=y
@@ -166,7 +170,6 @@ CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
-CONFIG_LOCKUP_DETECTOR=y
 CONFIG_WQ_WATCHDOG=y
 CONFIG_PANIC_TIMEOUT=-1
 # CONFIG_SCHED_DEBUG is not set

arch/arm/configs/aspeed_g5_defconfig

@@ -67,6 +67,7 @@ CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_ASPEED_LPC_CTRL=y
+CONFIG_ASPEED_LPC_SNOOP=y
 CONFIG_EEPROM_AT24=y
 CONFIG_NETDEVICES=y
 CONFIG_NETCONSOLE=y
@@ -107,6 +108,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_ASPEED_VUART=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_ASPEED_BT_IPMI_BMC=y
@@ -117,6 +119,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA9541=y
 CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_ASPEED=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_ASPEED=y
@@ -169,7 +172,6 @@ CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
-CONFIG_LOCKUP_DETECTOR=y
 CONFIG_WQ_WATCHDOG=y
 CONFIG_PANIC_TIMEOUT=-1
 # CONFIG_SCHED_DEBUG is not set

arch/arm/configs/bcm2835_defconfig

@@ -55,6 +55,7 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_CONSTANTS=y
@@ -62,9 +63,15 @@ CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_NETDEVICES=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
+CONFIG_BRCMFMAC=m
 CONFIG_ZD1211RW=y
 CONFIG_INPUT_EVDEV=y
 # CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_BCM2835AUX=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_TTY_PRINTK=y

arch/arm/configs/davinci_all_defconfig

@@ -143,6 +143,8 @@ CONFIG_VIDEO_ADV7343=m
 CONFIG_DRM=m
 CONFIG_DRM_TILCDC=m
 CONFIG_DRM_DUMB_VGA_DAC=m
+CONFIG_DRM_TINYDRM=m
+CONFIG_TINYDRM_ST7586=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_DA8XX=y

arch/arm/configs/exynos_defconfig

@@ -3,7 +3,6 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
@@ -48,7 +47,43 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_LEDS=y
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_INTEL=y
+CONFIG_BT_HCIUART_BCM=y
+CONFIG_BT_HCIUART_QCA=y
+CONFIG_BT_HCIUART_AG6XX=y
+CONFIG_BT_HCIUART_MRVL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
 CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_MAC80211_LEDS=y
+CONFIG_NFC=y
+CONFIG_NFC_DIGITAL=m
+CONFIG_NFC_NCI=y
+CONFIG_NFC_NCI_SPI=m
+CONFIG_NFC_NCI_UART=m
+CONFIG_NFC_HCI=m
+CONFIG_NFC_SHDLC=y
+CONFIG_NFC_S3FWRN5_I2C=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DMA_CMA=y
@@ -65,7 +100,9 @@ CONFIG_BLK_DEV_DM=y
 CONFIG_DM_CRYPT=m
 CONFIG_NETDEVICES=y
 CONFIG_SMSC911X=y
+CONFIG_USB_RTL8150=m
 CONFIG_USB_RTL8152=y
+CONFIG_USB_LAN78XX=m
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
@@ -189,7 +226,25 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_EXYNOS=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_EXYNOS=y
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
 CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC2=y
 CONFIG_USB_HSIC_USB3503=y
@@ -209,7 +264,6 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_MAX77693=y
 CONFIG_LEDS_MAX8997=y
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX8997=y
@@ -253,18 +307,30 @@ CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
-CONFIG_DEBUG_RT_MUTEXES=y
+# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_DEBUG_SPINLOCK=y
+CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
 CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_RSA=m
+CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA3=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
@@ -276,6 +342,7 @@ CONFIG_CRYPTO_SHA1_ARM_NEON=m
 CONFIG_CRYPTO_SHA256_ARM=m
 CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRC_CCITT=y
 CONFIG_FONTS=y
 CONFIG_FONT_7x14=y

arch/arm/configs/ezx_defconfig

@@ -27,7 +27,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEBUG=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m

arch/arm/configs/imx_v6_v7_defconfig

@@ -51,6 +51,7 @@ CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_CMA=y
+CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
@@ -186,6 +187,7 @@ CONFIG_SERIAL_FSL_LPUART=y
 CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_GPIO=y
 # CONFIG_I2C_HELPER_AUTO is not set
 CONFIG_I2C_ALGOPCF=m
@@ -193,12 +195,14 @@ CONFIG_I2C_ALGOPCA=m
 CONFIG_I2C_GPIO=y
 CONFIG_I2C_IMX=y
 CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_FSL_DSPI=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_MC9S08DZ60=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_STMPE=y
+CONFIG_GPIO_74X164=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_IMX=y
 CONFIG_POWER_RESET_SYSCON=y
@@ -227,14 +231,20 @@ CONFIG_REGULATOR_PFUZE100=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_RC_CORE=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_GPIO_CIR=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_MUX=y
 CONFIG_SOC_CAMERA=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_CODA=y
+CONFIG_VIDEO_CODA=m
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_OV5640=m
 CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_IMX_IPUV3_CORE=y
 CONFIG_DRM=y
@@ -344,6 +354,9 @@ CONFIG_FSL_EDMA=y
 CONFIG_IMX_SDMA=y
 CONFIG_MXS_DMA=y
 CONFIG_STAGING=y
+CONFIG_STAGING_MEDIA=y
+CONFIG_VIDEO_IMX_MEDIA=y
+CONFIG_COMMON_CLK_PWM=y
 CONFIG_IIO=y
 CONFIG_IMX7D_ADC=y
 CONFIG_VF610_ADC=y

arch/arm/configs/ixp4xx_defconfig

@@ -81,12 +81,8 @@ CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
 CONFIG_X25=m
 CONFIG_LAPB=m
-CONFIG_ECONET=m
-CONFIG_ECONET_AUNUDP=y
-CONFIG_ECONET_NATIVE=y
 CONFIG_WAN_ROUTER=m
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CBQ=m

arch/arm/configs/keystone_defconfig

@@ -112,6 +112,9 @@ CONFIG_IP_NF_ARP_MANGLE=y
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP_SCTP=y
 CONFIG_VLAN_8021Q=y
+CONFIG_CAN=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -156,6 +159,8 @@ CONFIG_POWER_RESET_KEYSTONE=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_DAVINCI_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
@@ -164,6 +169,8 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_KEYSTONE_USB_PHY=y
+CONFIG_MMC=y
+CONFIG_MMC_OMAP_HS=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
@@ -174,12 +181,18 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_DMADEVICES=y
 CONFIG_TI_EDMA=y
+CONFIG_MAILBOX=y
+CONFIG_TI_MESSAGE_MANAGER=y
 CONFIG_SOC_TI=y
 CONFIG_KEYSTONE_NAVIGATOR_QMSS=y
 CONFIG_KEYSTONE_NAVIGATOR_DMA=y
+CONFIG_TI_SCI_PM_DOMAINS=y
 CONFIG_MEMORY=y
 CONFIG_TI_AEMIF=y
 CONFIG_KEYSTONE_IRQ=y
+CONFIG_RESET_TI_SCI=m
+CONFIG_RESET_TI_SYSCON=m
+CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_FANOTIFY=y

arch/arm/configs/multi_v7_defconfig

@@ -104,13 +104,11 @@ CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
 CONFIG_ARCH_TEGRA_114_SOC=y
 CONFIG_ARCH_TEGRA_124_SOC=y
-CONFIG_TEGRA_EMC_SCALING_ENABLE=y
 CONFIG_ARCH_UNIPHIER=y
 CONFIG_ARCH_U8500=y
 CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_ARCH_VEXPRESS=y
-CONFIG_ARCH_VEXPRESS_CA9X4=y
 CONFIG_ARCH_VEXPRESS_TC2_PM=y
 CONFIG_ARCH_WM8850=y
 CONFIG_ARCH_ZYNQ=y
@@ -331,6 +329,7 @@ CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=20
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_SH_SCI_DMA=y
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_SERIAL_VT8500=y
@@ -456,6 +455,7 @@ CONFIG_SENSORS_NTC_THERMISTOR=m
 CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_CPU_THERMAL=y
+CONFIG_BRCMSTB_THERMAL=m
 CONFIG_ROCKCHIP_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
@@ -585,6 +585,7 @@ CONFIG_VIDEO_ADV7180=m
 CONFIG_VIDEO_ML86V7667=m
 CONFIG_DRM=y
 CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_I2C_ADV7511_AUDIO=y
 # CONFIG_DRM_I2C_CH7006 is not set
 # CONFIG_DRM_I2C_SIL164 is not set
 CONFIG_DRM_DUMB_VGA_DAC=m
@@ -604,7 +605,6 @@ CONFIG_ROCKCHIP_DW_MIPI_DSI=y
 CONFIG_ROCKCHIP_INNO_HDMI=y
 CONFIG_DRM_ATMEL_HLCDC=m
 CONFIG_DRM_RCAR_DU=m
-CONFIG_DRM_RCAR_HDMI=y
 CONFIG_DRM_RCAR_LVDS=y
 CONFIG_DRM_SUN4I=m
 CONFIG_DRM_TEGRA=y
@@ -651,9 +651,11 @@ CONFIG_SND_SOC_SMDK_WM8994_PCM=m
 CONFIG_SND_SOC_SNOW=m
 CONFIG_SND_SOC_SH4_FSI=m
 CONFIG_SND_SOC_RCAR=m
-CONFIG_SND_SOC_RSRC_CARD=m
+CONFIG_SND_SIMPLE_SCU_CARD=m
 CONFIG_SND_SUN4I_CODEC=m
 CONFIG_SND_SOC_TEGRA=m
+CONFIG_SND_SOC_TEGRA20_I2S=m
+CONFIG_SND_SOC_TEGRA30_I2S=m
 CONFIG_SND_SOC_TEGRA_RT5640=m
 CONFIG_SND_SOC_TEGRA_WM8753=m
 CONFIG_SND_SOC_TEGRA_WM8903=m
@@ -696,7 +698,6 @@ CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_AB8500_USB=y
 CONFIG_KEYSTONE_USB_PHY=y
-CONFIG_OMAP_USB3=y
 CONFIG_USB_GPIO_VBUS=y
 CONFIG_USB_ISP1301=y
 CONFIG_USB_MSM_OTG=m
@@ -712,7 +713,7 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_ARASAN=y
 CONFIG_MMC_SDHCI_OF_AT91=y
-CONFIG_MMC_SDHCI_OF_ESDHC=m
+CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_SDHCI_DOVE=y
 CONFIG_MMC_SDHCI_TEGRA=y
@@ -729,7 +730,6 @@ CONFIG_MMC_SDHCI_MSM=y
 CONFIG_MMC_MVSDIO=y
 CONFIG_MMC_SDHI=y
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 CONFIG_MMC_DW_PLTFM=y
 CONFIG_MMC_DW_EXYNOS=y
 CONFIG_MMC_DW_ROCKCHIP=y
@@ -826,7 +826,6 @@ CONFIG_BCMA_DRIVER_GPIO=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_PM=y
 CONFIG_QCOM_SMEM=y
-CONFIG_QCOM_SMD=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
 CONFIG_QCOM_SMSM=y
@@ -838,7 +837,6 @@ CONFIG_CHROME_PLATFORMS=y
 CONFIG_STAGING_BOARD=y
 CONFIG_CROS_EC_CHARDEV=m
 CONFIG_COMMON_CLK_MAX77686=y
-CONFIG_COMMON_CLK_MAX77802=m
 CONFIG_COMMON_CLK_RK808=m
 CONFIG_COMMON_CLK_S2MPS11=m
 CONFIG_APQ_MMCC_8084=y
@@ -934,7 +932,6 @@ CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOCKUP_DETECTOR=y
-CONFIG_CRYPTO_DEV_TEGRA_AES=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_KEYSTONE_IRQ=y
 CONFIG_HW_RANDOM=y

arch/arm/configs/omap2plus_defconfig

@@ -170,6 +170,7 @@ CONFIG_TI_CPTS=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_AT803X_PHY=y
 CONFIG_DP83848_PHY=y
+CONFIG_DP83867_PHY=y
 CONFIG_MICREL_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_PPP=m
@@ -250,6 +251,7 @@ CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PCA953X=m
 CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_LP87565=y
 CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_TWL4030=y
 CONFIG_W1=m
@@ -284,6 +286,7 @@ CONFIG_MFD_TI_AM335X_TSCADC=m
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TI_LP873X=y
+CONFIG_MFD_TI_LP87565=y
 CONFIG_MFD_TPS65218=y
 CONFIG_MFD_TPS65910=y
 CONFIG_TWL6040_CORE=y
@@ -292,6 +295,7 @@ CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_LM363X=m
 CONFIG_REGULATOR_LP872X=y
 CONFIG_REGULATOR_LP873X=y
+CONFIG_REGULATOR_LP87565=y
 CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_PBIAS=y
 CONFIG_REGULATOR_TI_ABB=y

arch/arm/configs/qcom_defconfig

@@ -199,7 +199,6 @@ CONFIG_QCOM_WCNSS_PIL=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_PM=y
 CONFIG_QCOM_SMEM=y
-CONFIG_QCOM_SMD=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
 CONFIG_QCOM_SMSM=y

arch/arm/configs/shmobile_defconfig

@@ -27,6 +27,7 @@ CONFIG_ARCH_SH73A0=y
 CONFIG_PL310_ERRATA_588369=y
 CONFIG_ARM_ERRATA_754322=y
 CONFIG_PCI=y
+CONFIG_PCI_MSI=y
 CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCIE_RCAR=y
 CONFIG_SMP=y
@@ -83,14 +84,14 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
 CONFIG_SH_ETH=y
+CONFIG_RAVB=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_SMSC911X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_SMSC_PHY=y
 CONFIG_MICREL_PHY=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_SMSC_PHY=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -105,6 +106,7 @@ CONFIG_SERIAL_8250_EM=y
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=20
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_SH_SCI_DMA=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_DEMUX_PINCTRL=y
@@ -121,9 +123,9 @@ CONFIG_SPI_SH_HSPI=y
 CONFIG_GPIO_EM=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_PCF857X=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_RMOBILE=y
+CONFIG_POWER_SUPPLY=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
@@ -153,10 +155,11 @@ CONFIG_VIDEO_ADV7180=y
 CONFIG_VIDEO_ADV7604=y
 CONFIG_VIDEO_ML86V7667=y
 CONFIG_DRM=y
-CONFIG_DRM_I2C_ADV7511=y
 CONFIG_DRM_RCAR_DU=y
-CONFIG_DRM_RCAR_HDMI=y
 CONFIG_DRM_RCAR_LVDS=y
+CONFIG_DRM_DUMB_VGA_DAC=y
+CONFIG_DRM_I2C_ADV7511=y
+CONFIG_DRM_I2C_ADV7511_AUDIO=y
 CONFIG_FB_SH_MOBILE_LCDC=y
 CONFIG_FB_SH_MOBILE_MERAM=y
 # CONFIG_LCD_CLASS_DEVICE is not set
@@ -169,12 +172,12 @@ CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_SOC_SH4_FSI=y
 CONFIG_SND_SOC_RCAR=y
-CONFIG_SND_SOC_RSRC_CARD=y
 CONFIG_SND_SOC_AK4642=y
 CONFIG_SND_SOC_WM8978=y
+CONFIG_SND_SIMPLE_SCU_CARD=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_RCAR=y
+CONFIG_USB_XHCI_PLATFORM=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_R8A66597_HCD=y
@@ -190,6 +193,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_RS5C372=y
+CONFIG_RTC_DRV_BQ32K=y
 CONFIG_RTC_DRV_S35390A=y
 CONFIG_RTC_DRV_RX8581=y
 CONFIG_RTC_DRV_DA9063=y

arch/arm/configs/sunxi_defconfig

@@ -1,4 +1,3 @@
-CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CGROUPS=y
@@ -56,7 +55,6 @@ CONFIG_STMMAC_ETH=y
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_SUN4I_LRADC=y
 # CONFIG_INPUT_MOUSE is not set
@@ -71,7 +69,6 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=8
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_SUN6I_P2WI=y
@@ -80,14 +77,14 @@ CONFIG_SPI_SUN4I=y
 CONFIG_SPI_SUN6I=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY=y
+CONFIG_CHARGER_AXP20X=y
+CONFIG_BATTERY_AXP20X=y
 CONFIG_AXP20X_POWER=y
 CONFIG_THERMAL=y
-CONFIG_THERMAL_OF=y
 CONFIG_CPU_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_SUNXI_WATCHDOG=y
 CONFIG_MFD_AC100=y
-CONFIG_MFD_AXP20X=y
 CONFIG_MFD_AXP20X_I2C=y
 CONFIG_MFD_AXP20X_RSB=y
 CONFIG_REGULATOR=y
@@ -99,12 +96,9 @@ CONFIG_RC_CORE=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_SUNXI=y
 CONFIG_DRM=y
-CONFIG_DRM_DUMB_VGA_DAC=y
 CONFIG_DRM_SUN4I=y
-CONFIG_FB=y
+CONFIG_DRM_DUMB_VGA_DAC=y
 CONFIG_FB_SIMPLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
@@ -130,12 +124,13 @@ CONFIG_RTC_CLASS=y
 # CONFIG_RTC_INTF_SYSFS is not set
 # CONFIG_RTC_INTF_PROC is not set
 CONFIG_RTC_DRV_AC100=y
-CONFIG_RTC_DRV_SUN6I=y
 CONFIG_RTC_DRV_SUNXI=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_SUN6I=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXTCON=y
+CONFIG_IIO=y
+CONFIG_AXP20X_ADC=y
 CONFIG_PWM=y
 CONFIG_PWM_SUN4I=y
 CONFIG_PHY_SUN4I_USB=y

arch/arm/configs/tegra_defconfig

@@ -121,7 +121,6 @@ CONFIG_TOUCHSCREEN_WM97XX=y
 CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_INPUT_MISC=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
@@ -202,6 +201,8 @@ CONFIG_SND_HDA_CODEC_HDMI=y
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_SOC_TEGRA=y
+CONFIG_SND_SOC_TEGRA20_I2S=y
+CONFIG_SND_SOC_TEGRA30_I2S=y
 CONFIG_SND_SOC_TEGRA_RT5640=y
 CONFIG_SND_SOC_TEGRA_WM8753=y
 CONFIG_SND_SOC_TEGRA_WM8903=y
@@ -218,6 +219,9 @@ CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_ACM=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_GADGET=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_SDHCI=y
@@ -247,8 +251,6 @@ CONFIG_RTC_DRV_TEGRA=y
 CONFIG_DMADEVICES=y
 CONFIG_TEGRA20_APB_DMA=y
 CONFIG_STAGING=y
-CONFIG_SENSORS_ISL29018=y
-CONFIG_SENSORS_ISL29028=y
 CONFIG_MFD_NVEC=y
 CONFIG_KEYBOARD_NVEC=y
 CONFIG_SERIO_NVEC_PS2=y
@@ -263,6 +265,8 @@ CONFIG_ARCH_TEGRA_124_SOC=y
 CONFIG_MEMORY=y
 CONFIG_IIO=y
 CONFIG_MPU3050_I2C=y
+CONFIG_SENSORS_ISL29018=y
+CONFIG_SENSORS_ISL29028=y
 CONFIG_AK8975=y
 CONFIG_PWM=y
 CONFIG_PWM_TEGRA=y
@@ -288,13 +292,11 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_VM=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_SG=y

arch/arm/configs/vexpress_defconfig

@@ -19,7 +19,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_VEXPRESS=y
-CONFIG_ARCH_VEXPRESS_CA9X4=y
 CONFIG_ARCH_VEXPRESS_DCSCB=y
 CONFIG_ARCH_VEXPRESS_TC2_PM=y
 # CONFIG_SWP_EMULATE is not set

arch/arm/include/debug/omap2plus.S

@@ -12,43 +12,6 @@
 
 #include <linux/serial_reg.h>
 
-/* OMAP2 serial ports */
-#define OMAP2_UART1_BASE	0x4806a000
-#define OMAP2_UART2_BASE	0x4806c000
-#define OMAP2_UART3_BASE	0x4806e000
-
-/* OMAP3 serial ports */
-#define OMAP3_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP3_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP3_UART3_BASE	0x49020000
-#define OMAP3_UART4_BASE	0x49042000	/* Only on 36xx */
-#define OMAP3_UART4_AM35XX_BASE	0x4809E000	/* Only on AM35xx */
-
-/* OMAP4 serial ports */
-#define OMAP4_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP4_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP4_UART3_BASE	0x48020000
-#define OMAP4_UART4_BASE	0x4806e000
-
-/* TI81XX serial ports */
-#define TI81XX_UART1_BASE	0x48020000
-#define TI81XX_UART2_BASE	0x48022000
-#define TI81XX_UART3_BASE	0x48024000
-
-/* AM3505/3517 UART4 */
-#define AM35XX_UART4_BASE	0x4809E000	/* Only on AM3505/3517 */
-
-/* AM33XX serial port */
-#define AM33XX_UART1_BASE	0x44E09000
-
-/* OMAP5 serial ports */
-#define OMAP5_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP5_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP5_UART3_BASE	OMAP4_UART3_BASE
-#define OMAP5_UART4_BASE	OMAP4_UART4_BASE
-#define OMAP5_UART5_BASE	0x48066000
-#define OMAP5_UART6_BASE	0x48068000
-
 /* External port on Zoom2/3 */
 #define ZOOM_UART_BASE		0x10000000
 #define ZOOM_UART_VIRT		0xfa400000
@@ -79,55 +42,6 @@ omap_uart_lsr:	.word	0
 		bne	100f			@ already configured
 
 		/* Configure the UART offset from the phys/virt base */
-#ifdef CONFIG_DEBUG_OMAP2UART1
-		mov	\rp, #UART_OFFSET(OMAP2_UART1_BASE)	@ omap2/3/4
-		b	98f
-#endif
-#ifdef CONFIG_DEBUG_OMAP2UART2
-		mov	\rp, #UART_OFFSET(OMAP2_UART2_BASE)	@ omap2/3/4
-		b	98f
-#endif
-#ifdef CONFIG_DEBUG_OMAP2UART3
-		mov	\rp, #UART_OFFSET(OMAP2_UART3_BASE)
-		b	98f
-#endif
-#ifdef CONFIG_DEBUG_OMAP3UART3
-		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
-		add	\rp, \rp, #0x00fb0000
-		add	\rp, \rp, #0x00006000		@ OMAP3_UART3_BASE
-		b	98f
-#endif
-#ifdef CONFIG_DEBUG_OMAP4UART3
-		mov	\rp, #UART_OFFSET(OMAP4_UART3_BASE)
-		b	98f
-#endif
-#ifdef CONFIG_DEBUG_OMAP3UART4
-		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
-		add	\rp, \rp, #0x00fb0000
-		add	\rp, \rp, #0x00028000		@ OMAP3_UART4_BASE
-		b	98f
-#endif
-#ifdef CONFIG_DEBUG_OMAP4UART4
-		mov	\rp, #UART_OFFSET(OMAP4_UART4_BASE)
-		b	98f
-#endif
-#ifdef CONFIG_DEBUG_TI81XXUART1
-		mov	\rp, #UART_OFFSET(TI81XX_UART1_BASE)
-		b	98f
-#endif
-#ifdef CONFIG_DEBUG_TI81XXUART2
-		mov	\rp, #UART_OFFSET(TI81XX_UART2_BASE)
-		b	98f
-#endif
-#ifdef CONFIG_DEBUG_TI81XXUART3
-		mov	\rp, #UART_OFFSET(TI81XX_UART3_BASE)
-		b	98f
-#endif
-#ifdef CONFIG_DEBUG_AM33XXUART1
-		ldr	\rp, =AM33XX_UART1_BASE
-		and	\rp, \rp, #0x00ffffff
-		b	97f
-#endif
 #ifdef CONFIG_DEBUG_ZOOM_UART
 		ldr	\rp, =ZOOM_UART_BASE
 		str	\rp, [\tmp, #0]		@ omap_uart_phys
@@ -138,28 +52,6 @@ omap_uart_lsr:	.word	0
 #endif
 		b	10b
 
-		/* AM33XX: Store both phys and virt address for the uart */
-97:		add	\rp, \rp, #0x44000000	@ phys base
-		str	\rp, [\tmp, #0]		@ omap_uart_phys
-		sub	\rp, \rp, #0x44000000	@ phys base
-		add	\rp, \rp, #0xf9000000	@ virt base
-		str	\rp, [\tmp, #4]		@ omap_uart_virt
-		mov	\rp, #(UART_LSR << OMAP_PORT_SHIFT)
-		str	\rp, [\tmp, #8]		@ omap_uart_lsr
-
-		b	10b
-
-		/* Store both phys and virt address for the uart */
-98:		add	\rp, \rp, #0x48000000	@ phys base
-		str	\rp, [\tmp, #0]		@ omap_uart_phys
-		sub	\rp, \rp, #0x48000000	@ phys base
-		add	\rp, \rp, #0xfa000000	@ virt base
-		str	\rp, [\tmp, #4]		@ omap_uart_virt
-		mov	\rp, #(UART_LSR << OMAP_PORT_SHIFT)
-		str	\rp, [\tmp, #8]		@ omap_uart_lsr
-
-		b	10b
-
 		.align
 99:		.word	.
 		.word	omap_uart_phys

arch/arm/kernel/cpuidle.c

@@ -101,8 +101,8 @@ static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu)
 
 	ops = arm_cpuidle_get_ops(enable_method);
 	if (!ops) {
-		pr_warn("%s: unsupported enable-method property: %s\n",
+		pr_warn("%pOF: unsupported enable-method property: %s\n",
-			dn->full_name, enable_method);
+			dn, enable_method);
 		return -EOPNOTSUPP;
 	}
 

arch/arm/kernel/devtree.c

@@ -95,7 +95,7 @@ void __init arm_dt_init_cpu_maps(void)
 		if (of_node_cmp(cpu->type, "cpu"))
 			continue;
 
-		pr_debug(" * %s...\n", cpu->full_name);
+		pr_debug(" * %pOF...\n", cpu);
 		/*
 		 * A device tree containing CPU nodes with missing "reg"
 		 * properties is considered invalid to build the
@@ -103,8 +103,7 @@ void __init arm_dt_init_cpu_maps(void)
 		 */
 		cell = of_get_property(cpu, "reg", &prop_bytes);
 		if (!cell || prop_bytes < sizeof(*cell)) {
-			pr_debug(" * %s missing reg property\n",
+			pr_debug(" * %pOF missing reg property\n", cpu);
-				     cpu->full_name);
 			of_node_put(cpu);
 			return;
 		}

arch/arm/kernel/topology.c

@@ -127,8 +127,7 @@ static void __init parse_dt_topology(void)
 
 		rate = of_get_property(cn, "clock-frequency", &len);
 		if (!rate || len != 4) {
-			pr_err("%s missing clock-frequency property\n",
+			pr_err("%pOF missing clock-frequency property\n", cn);
-				cn->full_name);
 			continue;
 		}
 

arch/arm/mach-ep93xx/clock.c

@@ -98,6 +98,13 @@ static struct clk clk_keypad = {
 	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
 	.set_rate	= set_keytchclk_rate,
 };
+static struct clk clk_adc = {
+	.parent		= &clk_xtali,
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_TSEN,
+	.set_rate	= set_keytchclk_rate,
+};
 static struct clk clk_spi = {
 	.parent		= &clk_xtali,
 	.rate		= EP93XX_EXT_CLK_RATE,
@@ -214,6 +221,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"pll2",		&clk_pll2),
 	INIT_CK("ohci-platform",	NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
+	INIT_CK("ep93xx-adc",		NULL,		&clk_adc),
 	INIT_CK("ep93xx-fb",		NULL,		&clk_video),
 	INIT_CK("ep93xx-spi.0",		NULL,		&clk_spi),
 	INIT_CK("ep93xx-i2s",		"mclk",		&clk_i2s_mclk),

arch/arm/mach-ep93xx/core.c

@@ -820,6 +820,30 @@ void ep93xx_ide_release_gpio(struct platform_device *pdev)
 }
 EXPORT_SYMBOL(ep93xx_ide_release_gpio);
 
+/*************************************************************************
+ * EP93xx ADC
+ *************************************************************************/
+static struct resource ep93xx_adc_resources[] = {
+	DEFINE_RES_MEM(EP93XX_ADC_PHYS_BASE, 0x28),
+	DEFINE_RES_IRQ(IRQ_EP93XX_TOUCH),
+};
+
+static struct platform_device ep93xx_adc_device = {
+	.name		= "ep93xx-adc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_adc_resources),
+	.resource	= ep93xx_adc_resources,
+};
+
+void __init ep93xx_register_adc(void)
+{
+	/* Power up ADC, deactivate Touch Screen Controller */
+	ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_TIN,
+				EP93XX_SYSCON_DEVCFG_ADCPD);
+
+	platform_device_register(&ep93xx_adc_device);
+}
+
 /*************************************************************************
  * EP93xx Security peripheral
  *************************************************************************/

arch/arm/mach-ep93xx/edb93xx.c

@@ -245,6 +245,7 @@ static void __init edb93xx_init_machine(void)
 	edb93xx_register_pwm();
 	edb93xx_register_fb();
 	edb93xx_register_ide();
+	ep93xx_register_adc();
 }
 
 

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -52,6 +52,7 @@ int ep93xx_i2s_acquire(void);
 void ep93xx_i2s_release(void);
 void ep93xx_register_ac97(void);
 void ep93xx_register_ide(void);
+void ep93xx_register_adc(void);
 int ep93xx_ide_acquire_gpio(struct platform_device *pdev);
 void ep93xx_ide_release_gpio(struct platform_device *pdev);
 

arch/arm/mach-ep93xx/soc.h

@@ -95,6 +95,7 @@
 #define EP93XX_KEY_MATRIX_PHYS_BASE	EP93XX_APB_PHYS(0x000f0000)
 #define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
 
+#define EP93XX_ADC_PHYS_BASE		EP93XX_APB_PHYS(0x00100000)
 #define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
 #define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 

arch/arm/mach-exynos/suspend.c

@@ -187,21 +187,20 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
 	struct irq_domain *parent_domain, *domain;
 
 	if (!parent) {
-		pr_err("%s: no parent, giving up\n", node->full_name);
+		pr_err("%pOF: no parent, giving up\n", node);
 		return -ENODEV;
 	}
 
 	parent_domain = irq_find_host(parent);
 	if (!parent_domain) {
-		pr_err("%s: unable to obtain parent domain\n", node->full_name);
+		pr_err("%pOF: unable to obtain parent domain\n", node);
 		return -ENXIO;
 	}
 
 	pmu_base_addr = of_iomap(node, 0);
 
 	if (!pmu_base_addr) {
-		pr_err("%s: failed to find exynos pmu register\n",
+		pr_err("%pOF: failed to find exynos pmu register\n", node);
-		       node->full_name);
 		return -ENOMEM;
 	}
 

arch/arm/mach-gemini/Kconfig

@@ -1,11 +1,16 @@
 menuconfig ARCH_GEMINI
 	bool "Cortina Systems Gemini"
 	depends on ARCH_MULTI_V4
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_AMBA
 	select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
+	select COMMON_CLK_GEMINI
 	select FARADAY_FTINTC010
 	select FTTMR010_TIMER
 	select GPIO_FTGPIO010
 	select GPIOLIB
+	select PINCTRL
+	select PINCTRL_GEMINI
 	select POWER_RESET
 	select POWER_RESET_GEMINI_POWEROFF
 	select POWER_RESET_SYSCON

arch/arm/mach-hisi/platsmp.c

@@ -109,7 +109,7 @@ static void hix5hd2_set_scu_boot_addr(phys_addr_t start_addr, phys_addr_t jump_a
 
 	virt = ioremap(start_addr, PAGE_SIZE);
 
-	writel_relaxed(0xe51ff004, virt);	/* ldr pc, [rc, #-4] */
+	writel_relaxed(0xe51ff004, virt);	/* ldr pc, [pc, #-4] */
 	writel_relaxed(jump_addr, virt + 4);	/* pc jump phy address */
 	iounmap(virt);
 }

arch/arm/mach-imx/gpc.c

@@ -224,13 +224,13 @@ static int __init imx_gpc_init(struct device_node *node,
 	int i;
 
 	if (!parent) {
-		pr_err("%s: no parent, giving up\n", node->full_name);
+		pr_err("%pOF: no parent, giving up\n", node);
 		return -ENODEV;
 	}
 
 	parent_domain = irq_find_host(parent);
 	if (!parent_domain) {
-		pr_err("%s: unable to obtain parent domain\n", node->full_name);
+		pr_err("%pOF: unable to obtain parent domain\n", node);
 		return -ENXIO;
 	}
 

arch/arm/mach-mvebu/Kconfig

@@ -60,6 +60,8 @@ config MACH_ARMADA_38X
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_753970
 	select ARM_GIC
+	select ARM_GLOBAL_TIMER
+	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 	select ARMADA_370_XP_IRQ
 	select ARMADA_38X_CLK
 	select HAVE_ARM_SCU

arch/arm/mach-mvebu/kirkwood.c

@@ -107,8 +107,7 @@ static void __init kirkwood_dt_eth_fixup(void)
 		clk_prepare_enable(clk);
 
 		/* store MAC address register contents in local-mac-address */
-		pr_err(FW_INFO "%s: local-mac-address is not set\n",
+		pr_err(FW_INFO "%pOF: local-mac-address is not set\n", np);
-		       np->full_name);
 
 		pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
 		if (!pmac)

arch/arm/mach-omap2/Kconfig

@@ -87,6 +87,7 @@ config SOC_DRA7XX
 	select OMAP_INTERCONNECT_BARRIER
 	select PM_OPP if PM
 	select ZONE_DMA if ARM_LPAE
+	select PINCTRL_TI_IODELAY if OF && PINCTRL
 
 config ARCH_OMAP2PLUS
 	bool

arch/arm/mach-omap2/board-generic.c

@@ -313,6 +313,7 @@ MACHINE_END
 
 #ifdef CONFIG_SOC_DRA7XX
 static const char *const dra74x_boards_compat[] __initconst = {
+	"ti,dra762",
 	"ti,am5728",
 	"ti,am5726",
 	"ti,dra742",

arch/arm/mach-omap2/dma.c

@@ -204,61 +204,6 @@ static unsigned configure_dma_errata(void)
 	return errata;
 }
 
-static const struct dma_slave_map omap24xx_sdma_map[] = {
-	{ "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) },
-	{ "omap-aes", "tx", SDMA_FILTER_PARAM(9) },
-	{ "omap-aes", "rx", SDMA_FILTER_PARAM(10) },
-	{ "omap-sham", "rx", SDMA_FILTER_PARAM(13) },
-	{ "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) },
-	{ "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) },
-	{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) },
-	{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) },
-	{ "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) },
-	{ "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) },
-	{ "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) },
-	{ "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) },
-	{ "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) },
-	{ "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) },
-	{ "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) },
-	{ "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) },
-	{ "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) },
-	{ "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) },
-	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) },
-	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) },
-	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) },
-	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) },
-	{ "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) },
-	{ "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) },
-	{ "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) },
-	{ "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) },
-	{ "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) },
-	{ "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) },
-	{ "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) },
-	{ "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) },
-	{ "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) },
-	{ "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) },
-	{ "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) },
-	{ "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) },
-	{ "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) },
-	{ "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) },
-	{ "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) },
-	{ "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) },
-	{ "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) },
-	{ "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) },
-	{ "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) },
-	{ "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) },
-	{ "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) },
-	{ "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) },
-
-	/* external DMA requests when tusb6010 is used */
-	{ "musb-tusb", "dmareq0", SDMA_FILTER_PARAM(2) },
-	{ "musb-tusb", "dmareq1", SDMA_FILTER_PARAM(3) },
-	{ "musb-tusb", "dmareq2", SDMA_FILTER_PARAM(14) }, /* OMAP2420 only */
-	{ "musb-tusb", "dmareq3", SDMA_FILTER_PARAM(15) }, /* OMAP2420 only */
-	{ "musb-tusb", "dmareq4", SDMA_FILTER_PARAM(16) }, /* OMAP2420 only */
-	{ "musb-tusb", "dmareq5", SDMA_FILTER_PARAM(64) }, /* OMAP2420 only */
-};
-
 static const struct dma_slave_map omap24xx_sdma_dt_map[] = {
 	/* external DMA requests when tusb6010 is used */
 	{ "musb-hdrc.1.auto", "dmareq0", SDMA_FILTER_PARAM(2) },
@@ -269,61 +214,6 @@ static const struct dma_slave_map omap24xx_sdma_dt_map[] = {
 	{ "musb-hdrc.1.auto", "dmareq5", SDMA_FILTER_PARAM(64) }, /* OMAP2420 only */
 };
 
-static const struct dma_slave_map omap3xxx_sdma_map[] = {
-	{ "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) },
-	{ "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) },
-	{ "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) },
-	{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) },
-	{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) },
-	{ "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) },
-	{ "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) },
-	{ "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) },
-	{ "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) },
-	{ "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) },
-	{ "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) },
-	{ "omap_i2c.3", "tx", SDMA_FILTER_PARAM(25) },
-	{ "omap_i2c.3", "rx", SDMA_FILTER_PARAM(26) },
-	{ "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) },
-	{ "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) },
-	{ "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) },
-	{ "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) },
-	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) },
-	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) },
-	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) },
-	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) },
-	{ "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) },
-	{ "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) },
-	{ "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) },
-	{ "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) },
-	{ "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) },
-	{ "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) },
-	{ "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) },
-	{ "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) },
-	{ "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) },
-	{ "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) },
-	{ "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) },
-	{ "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) },
-	{ "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) },
-	{ "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) },
-	{ "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) },
-	{ "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) },
-	{ "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) },
-	{ "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) },
-	{ "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) },
-	{ "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) },
-	{ "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) },
-	{ "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) },
-	{ "omap-aes", "tx", SDMA_FILTER_PARAM(65) },
-	{ "omap-aes", "rx", SDMA_FILTER_PARAM(66) },
-	{ "omap-sham", "rx", SDMA_FILTER_PARAM(69) },
-	{ "omap2_mcspi.3", "tx0", SDMA_FILTER_PARAM(70) },
-	{ "omap2_mcspi.3", "rx0", SDMA_FILTER_PARAM(71) },
-	{ "omap_hsmmc.2", "tx", SDMA_FILTER_PARAM(77) },
-	{ "omap_hsmmc.2", "rx", SDMA_FILTER_PARAM(78) },
-	{ "omap_uart.3", "tx", SDMA_FILTER_PARAM(81) },
-	{ "omap_uart.3", "rx", SDMA_FILTER_PARAM(82) },
-};
-
 static struct omap_system_dma_plat_info dma_plat_info __initdata = {
 	.reg_map	= reg_map,
 	.channel_stride	= 0x60,
@@ -352,24 +242,10 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 	p.dma_attr = (struct omap_dma_dev_attr *)oh->dev_attr;
 	p.errata = configure_dma_errata();
 
-	if (!of_have_populated_dt()) {
+	if (soc_is_omap24xx()) {
-		if (soc_is_omap24xx()) {
+		/* DMA slave map for drivers not yet converted to DT */
-			p.slave_map = omap24xx_sdma_map;
+		p.slave_map = omap24xx_sdma_dt_map;
-			p.slavecnt = ARRAY_SIZE(omap24xx_sdma_map);
+		p.slavecnt = ARRAY_SIZE(omap24xx_sdma_dt_map);
-		} else if (soc_is_omap34xx() || soc_is_omap3630()) {
-			p.slave_map = omap3xxx_sdma_map;
-			p.slavecnt = ARRAY_SIZE(omap3xxx_sdma_map);
-		} else {
-			pr_err("%s: The legacy DMA map is not provided!\n",
-			       __func__);
-			return -ENODEV;
-		}
-	} else {
-		if (soc_is_omap24xx()) {
-			/* DMA slave map for drivers not yet converted to DT */
-			p.slave_map = omap24xx_sdma_dt_map;
-			p.slavecnt = ARRAY_SIZE(omap24xx_sdma_dt_map);
-		}
 	}
 
 	pdev = omap_device_build(name, 0, oh, &p, sizeof(p));
@@ -413,21 +289,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 
 static int __init omap2_system_dma_init(void)
 {
-	struct platform_device *pdev;
+	return omap_hwmod_for_each_by_class("dma",
-	int res;
-
-	res = omap_hwmod_for_each_by_class("dma",
 			omap2_system_dma_init_dev, NULL);
-	if (res)
-		return res;
-
-	if (of_have_populated_dt())
-		return res;
-
-	pdev = platform_device_register_full(&omap_dma_dev_info);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return res;
 }
 omap_arch_initcall(omap2_system_dma_init);

arch/arm/mach-omap2/id.c

@@ -663,6 +663,15 @@ void __init dra7xxx_check_revision(void)
 	hawkeye = (idcode >> 12) & 0xffff;
 	rev = (idcode >> 28) & 0xff;
 	switch (hawkeye) {
+	case 0xbb50:
+		switch (rev) {
+		case 0:
+		default:
+			omap_revision = DRA762_REV_ES1_0;
+			break;
+		}
+		break;
+
 	case 0xb990:
 		switch (rev) {
 		case 0:

arch/arm/mach-omap2/omap-smp.c

@@ -342,7 +342,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 		c = &omap443x_cfg;
 	else if (soc_is_omap446x())
 		c = &omap446x_cfg;
-	else if (soc_is_dra74x() || soc_is_omap54xx())
+	else if (soc_is_dra74x() || soc_is_omap54xx() || soc_is_dra76x())
 		c = &omap5_cfg;
 
 	if (!c) {
@@ -355,7 +355,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 	cfg.startup_addr = c->startup_addr;
 	cfg.wakeupgen_base = omap_get_wakeupgen_base();
 
-	if (soc_is_dra74x() || soc_is_omap54xx()) {
+	if (soc_is_dra74x() || soc_is_omap54xx() || soc_is_dra76x()) {
 		if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
 			cfg.startup_addr = omap5_secondary_hyp_startup;
 		omap5_erratum_workaround_801819();

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -522,13 +522,13 @@ static int __init wakeupgen_init(struct device_node *node,
 	u32 val;
 
 	if (!parent) {
-		pr_err("%s: no parent, giving up\n", node->full_name);
+		pr_err("%pOF: no parent, giving up\n", node);
 		return -ENODEV;
 	}
 
 	parent_domain = irq_find_host(parent);
 	if (!parent_domain) {
-		pr_err("%s: unable to obtain parent domain\n", node->full_name);
+		pr_err("%pOF: unable to obtain parent domain\n", node);
 		return -ENXIO;
 	}
 	/* Not supported on OMAP4 ES1.0 silicon */

arch/arm/mach-omap2/omap_device.c

@@ -672,7 +672,6 @@ static int _od_suspend_noirq(struct device *dev)
 
 	if (!ret && !pm_runtime_status_suspended(dev)) {
 		if (pm_generic_runtime_suspend(dev) == 0) {
-			pm_runtime_set_suspended(dev);
 			omap_device_idle(pdev);
 			od->flags |= OMAP_DEVICE_SUSPENDED;
 		}
@@ -689,15 +688,6 @@ static int _od_resume_noirq(struct device *dev)
 	if (od->flags & OMAP_DEVICE_SUSPENDED) {
 		od->flags &= ~OMAP_DEVICE_SUSPENDED;
 		omap_device_enable(pdev);
-		/*
-		 * XXX: we run before core runtime pm has resumed itself. At
-		 * this point in time, we just restore the runtime pm state and
-		 * considering symmetric operations in resume, we donot expect
-		 * to fail. If we failed, something changed in core runtime_pm
-		 * framework OR some device driver messed things up, hence, WARN
-		 */
-		WARN(pm_runtime_set_active(dev),
-		     "Could not set %s runtime state active\n", dev_name(dev));
 		pm_generic_runtime_resume(dev);
 	}
 

arch/arm/mach-omap2/omap_hwmod.c

@@ -2417,8 +2417,8 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
 		if (mem)
 			pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
 		else
-			pr_err("omap_hwmod: %s: Missing dt reg%i for %s\n",
+			pr_err("omap_hwmod: %s: Missing dt reg%i for %pOF\n",
-			       oh->name, index, np->full_name);
+			       oh->name, index, np);
 		return -ENXIO;
 	}
 

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -4070,6 +4070,11 @@ static struct omap_hwmod_ocp_if *dra7xx_gp_hwmod_ocp_ifs[] __initdata = {
 };
 
 /* SoC variant specific hwmod links */
+static struct omap_hwmod_ocp_if *dra76x_hwmod_ocp_ifs[] __initdata = {
+	&dra7xx_l4_per3__usb_otg_ss4,
+	NULL,
+};
+
 static struct omap_hwmod_ocp_if *dra74x_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_per3__usb_otg_ss4,
 	NULL,
@@ -4095,12 +4100,14 @@ int __init dra7xx_hwmod_init(void)
 		ret = omap_hwmod_register_links(dra74x_hwmod_ocp_ifs);
 	else if (!ret && soc_is_dra72x())
 		ret = omap_hwmod_register_links(dra72x_hwmod_ocp_ifs);
+	else if (!ret && soc_is_dra76x())
+		ret = omap_hwmod_register_links(dra76x_hwmod_ocp_ifs);
 
 	if (!ret && omap_type() == OMAP2_DEVICE_TYPE_GP)
 		ret = omap_hwmod_register_links(dra7xx_gp_hwmod_ocp_ifs);
 
-	/* now for the IPs *NOT* in dra71 */
+	/* now for the IPs available only in dra74 and dra72 */
-	if (!ret && !of_machine_is_compatible("ti,dra718"))
+	if (!ret && !of_machine_is_compatible("ti,dra718") && !soc_is_dra76x())
 		ret = omap_hwmod_register_links(dra74x_dra72x_hwmod_ocp_ifs);
 
 	return ret;

arch/arm/mach-omap2/pdata-quirks.c

@@ -434,6 +434,26 @@ static void __init omap5_uevm_legacy_init(void)
 }
 #endif
 
+#ifdef CONFIG_SOC_DRA7XX
+static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc1;
+static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc2;
+static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc3;
+
+static void __init dra7x_evm_mmc_quirk(void)
+{
+	if (omap_rev() == DRA752_REV_ES1_1 || omap_rev() == DRA752_REV_ES1_0) {
+		dra7_hsmmc_data_mmc1.version = "rev11";
+		dra7_hsmmc_data_mmc1.max_freq = 96000000;
+
+		dra7_hsmmc_data_mmc2.version = "rev11";
+		dra7_hsmmc_data_mmc2.max_freq = 48000000;
+
+		dra7_hsmmc_data_mmc3.version = "rev11";
+		dra7_hsmmc_data_mmc3.max_freq = 48000000;
+	}
+}
+#endif
+
 static struct pcs_pdata pcs_pdata;
 
 void omap_pcs_legacy_init(int irq, void (*rearm)(void))
@@ -560,6 +580,14 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 		       &omap4_iommu_pdata),
 	OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
 		       &omap4_iommu_pdata),
+#endif
+#ifdef CONFIG_SOC_DRA7XX
+	OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x4809c000, "4809c000.mmc",
+		       &dra7_hsmmc_data_mmc1),
+	OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x480b4000, "480b4000.mmc",
+		       &dra7_hsmmc_data_mmc2),
+	OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x480ad000, "480ad000.mmc",
+		       &dra7_hsmmc_data_mmc3),
 #endif
 	/* Common auxdata */
 	OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata),
@@ -589,6 +617,9 @@ static struct pdata_init pdata_quirks[] __initdata = {
 #endif
 #ifdef CONFIG_SOC_OMAP5
 	{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
+#endif
+#ifdef CONFIG_SOC_DRA7XX
+	{ "ti,dra7-evm", dra7x_evm_mmc_quirk, },
 #endif
 	{ /* sentinel */ },
 };

arch/arm/mach-omap2/powerdomains7xx_data.c

@@ -29,6 +29,7 @@
 #include "prcm44xx.h"
 #include "prm7xx.h"
 #include "prcm_mpu7xx.h"
+#include "soc.h"
 
 /* iva_7xx_pwrdm: IVA-HD power domain */
 static struct powerdomain iva_7xx_pwrdm = {
@@ -63,6 +64,14 @@ static struct powerdomain custefuse_7xx_pwrdm = {
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
 
+/* custefuse_aon_7xx_pwrdm: Customer efuse controller power domain */
+static struct powerdomain custefuse_aon_7xx_pwrdm = {
+	.name		  = "custefuse_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_CUSTEFUSE_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+};
+
 /* ipu_7xx_pwrdm: Audio back end power domain */
 static struct powerdomain ipu_7xx_pwrdm = {
 	.name		  = "ipu_pwrdm",
@@ -350,7 +359,6 @@ static struct powerdomain eve1_7xx_pwrdm = {
 static struct powerdomain *powerdomains_dra7xx[] __initdata = {
 	&iva_7xx_pwrdm,
 	&rtc_7xx_pwrdm,
-	&custefuse_7xx_pwrdm,
 	&ipu_7xx_pwrdm,
 	&dss_7xx_pwrdm,
 	&l4per_7xx_pwrdm,
@@ -374,9 +382,32 @@ static struct powerdomain *powerdomains_dra7xx[] __initdata = {
 	NULL
 };
 
+static struct powerdomain *powerdomains_dra76x[] __initdata = {
+	&custefuse_aon_7xx_pwrdm,
+	NULL
+};
+
+static struct powerdomain *powerdomains_dra74x[] __initdata = {
+	&custefuse_7xx_pwrdm,
+	NULL
+};
+
+static struct powerdomain *powerdomains_dra72x[] __initdata = {
+	&custefuse_aon_7xx_pwrdm,
+	NULL
+};
+
 void __init dra7xx_powerdomains_init(void)
 {
 	pwrdm_register_platform_funcs(&omap4_pwrdm_operations);
 	pwrdm_register_pwrdms(powerdomains_dra7xx);
+
+	if (soc_is_dra76x())
+		pwrdm_register_pwrdms(powerdomains_dra76x);
+	else if (soc_is_dra74x())
+		pwrdm_register_pwrdms(powerdomains_dra74x);
+	else if (soc_is_dra72x())
+		pwrdm_register_pwrdms(powerdomains_dra72x);
+
 	pwrdm_complete_init();
 }

arch/arm/mach-omap2/prm3xxx.c

@@ -706,7 +706,7 @@ static int omap3xxx_prm_late_init(void)
 	np = of_find_matching_node(NULL, omap3_prm_dt_match_table);
 	if (np) {
 		irq_num = of_irq_get(np, 0);
-		if (irq_num >= 0)
+		if (irq_num > 0)
 			omap3_prcm_irq_setup.irq = irq_num;
 	}
 

arch/arm/mach-omap2/prm44xx.c

@@ -747,7 +747,7 @@ static int omap44xx_prm_late_init(void)
 	 * Already have OMAP4 IRQ num. For all other platforms, we need
 	 * IRQ numbers from DT
 	 */
-	if (irq_num < 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) {
+	if (irq_num <= 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) {
 		if (irq_num == -EPROBE_DEFER)
 			return irq_num;
 
@@ -756,7 +756,7 @@ static int omap44xx_prm_late_init(void)
 	}
 
 	/* Once OMAP4 DT is filled as well */
-	if (irq_num >= 0) {
+	if (irq_num > 0) {
 		omap4_prcm_irq_setup.irq = irq_num;
 		omap4_prcm_irq_setup.xlate_irq = NULL;
 	}

arch/arm/mach-omap2/soc.h

@@ -167,6 +167,7 @@ IS_TI_SUBCLASS(816x, 0x816)
 IS_TI_SUBCLASS(814x, 0x814)
 IS_AM_SUBCLASS(335x, 0x335)
 IS_AM_SUBCLASS(437x, 0x437)
+IS_DRA_SUBCLASS(76x, 0x76)
 IS_DRA_SUBCLASS(75x, 0x75)
 IS_DRA_SUBCLASS(72x, 0x72)
 
@@ -185,6 +186,7 @@ IS_DRA_SUBCLASS(72x, 0x72)
 #define soc_is_omap54xx()		0
 #define soc_is_omap543x()		0
 #define soc_is_dra7xx()			0
+#define soc_is_dra76x()			0
 #define soc_is_dra74x()			0
 #define soc_is_dra72x()			0
 
@@ -314,9 +316,11 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 #if defined(CONFIG_SOC_DRA7XX)
 #undef soc_is_dra7xx
+#undef soc_is_dra76x
 #undef soc_is_dra74x
 #undef soc_is_dra72x
 #define soc_is_dra7xx()	is_dra7xx()
+#define soc_is_dra76x()	is_dra76x()
 #define soc_is_dra74x()	is_dra75x()
 #define soc_is_dra72x()	is_dra72x()
 #endif
@@ -386,6 +390,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP5432_REV_ES2_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8))
 
 #define DRA7XX_CLASS		0x07000000
+#define DRA762_REV_ES1_0	(DRA7XX_CLASS | (0x62 << 16) | (0x10 << 8))
 #define DRA752_REV_ES1_0	(DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8))
 #define DRA752_REV_ES1_1	(DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8))
 #define DRA752_REV_ES2_0	(DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8))

arch/arm/mach-rockchip/Kconfig

@@ -3,6 +3,7 @@ config ARCH_ROCKCHIP
 	depends on ARCH_MULTI_V7
 	select PINCTRL
 	select PINCTRL_ROCKCHIP
+	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_AMBA
 	select ARM_GIC
@@ -16,6 +17,7 @@ config ARCH_ROCKCHIP
 	select ROCKCHIP_TIMER
 	select ARM_GLOBAL_TIMER
 	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
+	select ZONE_DMA if ARM_LPAE
 	help
 	  Support for Rockchip's Cortex-A9 Single-to-Quad-Core-SoCs
 	  containing the RK2928, RK30xx and RK31xx series.

arch/arm/mach-rockchip/platsmp.c

@@ -67,7 +67,7 @@ static struct reset_control *rockchip_get_core_reset(int cpu)
 	else
 		np = of_get_cpu_node(cpu, NULL);
 
-	return of_reset_control_get(np, NULL);
+	return of_reset_control_get_exclusive(np, NULL);
 }
 
 static int pmu_set_power_domain(int pd, bool on)
@@ -182,8 +182,8 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node)
 
 	ret = of_address_to_resource(node, 0, &res);
 	if (ret < 0) {
-		pr_err("%s: could not get address for node %s\n",
+		pr_err("%s: could not get address for node %pOF\n",
-		       __func__, node->full_name);
+		       __func__, node);
 		return ret;
 	}
 

arch/arm/mach-s3c24xx/Kconfig

@@ -229,7 +229,7 @@ config ARCH_H1940
 config H1940BT
 	tristate "Control the state of H1940 bluetooth chip"
 	depends on ARCH_H1940
-	select RFKILL
+	depends on RFKILL
 	help
 	  This is a simple driver that is able to control
 	  the state of built in bluetooth chip on h1940.

arch/arm/mach-s3c24xx/common.c

@@ -173,7 +173,7 @@ static unsigned long s3c24xx_read_idcode_v5(void)
 		return gs;
 #endif
 
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#if defined(CONFIG_CPU_S3C2412)
 	return __raw_readl(S3C2412_GSTATUS1);
 #else
 	return 1UL;	/* don't look like an 2400 */

arch/arm/mach-s3c24xx/include/mach/regs-clock.h

@@ -77,7 +77,7 @@
 
 #endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
 
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#if defined(CONFIG_CPU_S3C2412)
 
 #define S3C2412_OSCSET		S3C2410_CLKREG(0x18)
 #define S3C2412_CLKSRC		S3C2410_CLKREG(0x1C)
@@ -141,7 +141,7 @@
 #define S3C2412_CLKSRC_UREFCLK_EXTCLK	(1<<12)
 #define S3C2412_CLKSRC_EREFCLK_EXTCLK	(1<<14)
 
-#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
+#endif /* CONFIG_CPU_S3C2412 */
 
 #define S3C2416_CLKDIV2		S3C2410_CLKREG(0x28)
 

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -287,7 +287,7 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
 	.nr_sets	= ARRAY_SIZE(mini2440_nand_sets),
 	.sets		= mini2440_nand_sets,
 	.ignore_unset_ecc = 1,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.ecc_mode       = NAND_ECC_HW,
 };
 
 /* DM9000AEP 10/100 ethernet controller */

arch/arm/mach-s3c24xx/mach-smdk2443.c

@@ -111,9 +111,6 @@ static struct platform_device *smdk2443_devices[] __initdata = {
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_hsmmc1,
-#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
-	&s3c_device_ac97,
-#endif
 	&s3c2443_device_dma,
 };
 
@@ -133,11 +130,6 @@ static void __init smdk2443_init_time(void)
 static void __init smdk2443_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
-
-#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
-	s3c24xx_ac97_setup_gpio(S3C24XX_AC97_GPE0);
-#endif
-
 	platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
 	smdk_machine_init();
 }

arch/arm/mach-s3c24xx/sleep.S

@@ -33,10 +33,11 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 
-/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
+/*
+ * S3C24XX_DEBUG_RESUME is dangerous if your bootloader does not
  * reset the UART configuration, only enable if you really need this!
-*/
+ */
-//#define CONFIG_DEBUG_RESUME
+//#define S3C24XX_DEBUG_RESUME
 
 	.text
 
@@ -71,13 +72,13 @@ ENTRY(s3c_cpu_resume)
 	str	r12, [ r14, #0x54 ]
 #endif
 
-#ifdef CONFIG_DEBUG_RESUME
+#ifdef S3C24XX_DEBUG_RESUME
 	mov	r3, #'L'
 	strb	r3, [ r2, #S3C2410_UTXH ]
 1001:
 	ldrb	r14, [ r3, #S3C2410_UTRSTAT ]
 	tst	r14, #S3C2410_UTRSTAT_TXE
 	beq	1001b
-#endif /* CONFIG_DEBUG_RESUME */
+#endif /* S3C24XX_DEBUG_RESUME */
 
 	b	cpu_resume

arch/arm/mach-shmobile/Kconfig

@@ -1,9 +1,6 @@
 config ARCH_SHMOBILE
 	bool
 
-config ARCH_SHMOBILE_MULTI
-	bool
-
 config PM_RMOBILE
 	bool
 	select PM
@@ -34,7 +31,6 @@ menuconfig ARCH_RENESAS
 	depends on ARCH_MULTI_V7 && MMU
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select ARCH_SHMOBILE
-	select ARCH_SHMOBILE_MULTI
 	select ARM_GIC
 	select GPIOLIB
 	select HAVE_ARM_SCU if SMP

arch/arm/mach-shmobile/pm-rcar-gen2.c

@@ -11,7 +11,9 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/ioport.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/smp.h>
 #include <linux/soc/renesas/rcar-sysc.h>
 #include <asm/io.h>
@@ -69,8 +71,9 @@ void __init rcar_gen2_pm_init(void)
 	struct device_node *np, *cpus;
 	bool has_a7 = false;
 	bool has_a15 = false;
-	phys_addr_t boot_vector_addr = ICRAM1;
+	struct resource res;
 	u32 syscier = 0;
+	int error;
 
 	if (once++)
 		return;
@@ -91,14 +94,38 @@ void __init rcar_gen2_pm_init(void)
 	else if (of_machine_is_compatible("renesas,r8a7791"))
 		syscier = 0x00111003;
 
+	np = of_find_compatible_node(NULL, NULL, "renesas,smp-sram");
+	if (!np) {
+		/* No smp-sram in DT, fall back to hardcoded address */
+		res = (struct resource)DEFINE_RES_MEM(ICRAM1,
+						      shmobile_boot_size);
+		goto map;
+	}
+
+	error = of_address_to_resource(np, 0, &res);
+	if (error) {
+		pr_err("Failed to get smp-sram address: %d\n", error);
+		return;
+	}
+
+map:
 	/* RAM for jump stub, because BAR requires 256KB aligned address */
-	p = ioremap_nocache(boot_vector_addr, shmobile_boot_size);
+	if (res.start & (256 * 1024 - 1) ||
+	    resource_size(&res) < shmobile_boot_size) {
+		pr_err("Invalid smp-sram region\n");
+		return;
+	}
+
+	p = ioremap(res.start, resource_size(&res));
+	if (!p)
+		return;
+
 	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
 	iounmap(p);
 
 	/* setup reset vectors */
 	p = ioremap_nocache(RST, 0x63);
-	bar = phys_to_sbar(boot_vector_addr);
+	bar = phys_to_sbar(res.start);
 	if (has_a15) {
 		writel_relaxed(bar, p + CA15BAR);
 		writel_relaxed(bar | SBAR_BAREN, p + CA15BAR);

arch/arm/mach-shmobile/pm-rmobile.c

@@ -195,8 +195,7 @@ static void __init add_special_pd(struct device_node *np, enum pd_types type)
 		return;
 	}
 
-	pr_debug("Special PM domain %s type %d for %s\n", pd->name, type,
+	pr_debug("Special PM domain %s type %d for %pOF\n", pd->name, type, np);
-		 np->full_name);
 
 	special_pds[num_special_pds].pd = pd;
 	special_pds[num_special_pds].type = type;
@@ -331,13 +330,13 @@ static int __init rmobile_init_pm_domains(void)
 	for_each_compatible_node(np, NULL, "renesas,sysc-rmobile") {
 		base = of_iomap(np, 0);
 		if (!base) {
-			pr_warn("%s cannot map reg 0\n", np->full_name);
+			pr_warn("%pOF cannot map reg 0\n", np);
 			continue;
 		}
 
 		pmd = of_get_child_by_name(np, "pm-domains");
 		if (!pmd) {
-			pr_warn("%s lacks pm-domains node\n", np->full_name);
+			pr_warn("%pOF lacks pm-domains node\n", np);
 			continue;
 		}
 

arch/arm/mach-shmobile/setup-rcar-gen2.c

@@ -29,17 +29,29 @@
 #include "common.h"
 #include "rcar-gen2.h"
 
+static const struct of_device_id cpg_matches[] __initconst = {
+	{ .compatible = "renesas,rcar-gen2-cpg-clocks", },
+	{ .compatible = "renesas,r8a7743-cpg-mssr", .data = "extal" },
+	{ .compatible = "renesas,r8a7790-cpg-mssr", .data = "extal" },
+	{ .compatible = "renesas,r8a7791-cpg-mssr", .data = "extal" },
+	{ .compatible = "renesas,r8a7793-cpg-mssr", .data = "extal" },
+	{ /* sentinel */ }
+};
+
 static unsigned int __init get_extal_freq(void)
 {
+	const struct of_device_id *match;
 	struct device_node *cpg, *extal;
 	u32 freq = 20000000;
+	int idx = 0;
 
-	cpg = of_find_compatible_node(NULL, NULL,
+	cpg = of_find_matching_node_and_match(NULL, cpg_matches, &match);
-				      "renesas,rcar-gen2-cpg-clocks");
 	if (!cpg)
 		return freq;
 
-	extal = of_parse_phandle(cpg, "clocks", 0);
+	if (match->data)
+		idx = of_property_match_string(cpg, "clock-names", match->data);
+	extal = of_parse_phandle(cpg, "clocks", idx);
 	of_node_put(cpg);
 	if (!extal)
 		return freq;
@@ -58,7 +70,8 @@ void __init rcar_gen2_timer_init(void)
 	void __iomem *base;
 	u32 freq;
 
-	if (of_machine_is_compatible("renesas,r8a7792") ||
+	if (of_machine_is_compatible("renesas,r8a7745") ||
+	    of_machine_is_compatible("renesas,r8a7792") ||
 	    of_machine_is_compatible("renesas,r8a7794")) {
 		freq = 260000000 / 8;	/* ZS / 8 */
 		/* CNTVOFF has to be initialized either from non-secure

arch/arm/mach-tegra/Kconfig

@@ -13,5 +13,7 @@ menuconfig ARCH_TEGRA
 	select ARCH_HAS_RESET_CONTROLLER
 	select RESET_CONTROLLER
 	select SOC_BUS
+	select ZONE_DMA if ARM_LPAE
+	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	help
 	  This enables support for NVIDIA Tegra based systems.

arch/arm/plat-samsung/include/plat/map-s3c.h

@@ -61,7 +61,7 @@
 
 /* deal with the registers that move under the 2412/2413 */
 
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#if defined(CONFIG_CPU_S3C2412)
 #ifndef __ASSEMBLY__
 extern void __iomem *s3c24xx_va_gpio2;
 #endif

arch/arm64/Kconfig.platforms

@@ -250,6 +250,7 @@ config ARCH_XGENE
 
 config ARCH_ZX
 	bool "ZTE ZX SoC Family"
+	select PINCTRL
 	help
 	  This enables support for ZTE ZX SoC Family
 

arch/arm64/configs/defconfig

@@ -3,6 +3,7 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
@@ -68,6 +69,7 @@ CONFIG_HOTPLUG_PCI_ACPI=y
 CONFIG_PCI_LAYERSCAPE=y
 CONFIG_PCI_HISI=y
 CONFIG_PCIE_QCOM=y
+CONFIG_PCIE_KIRIN=y
 CONFIG_PCIE_ARMADA_8K=y
 CONFIG_PCI_AARDVARK=y
 CONFIG_PCIE_RCAR=y
@@ -88,6 +90,7 @@ CONFIG_XEN=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_COMPAT=y
 CONFIG_HIBERNATION=y
+CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPUFREQ_DT=y
@@ -164,6 +167,7 @@ CONFIG_EEPROM_AT25=m
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_SAS_ATA=y
 CONFIG_SCSI_HISI_SAS=y
+CONFIG_SCSI_HISI_SAS_PCI=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_AHCI_PLATFORM=y
@@ -251,6 +255,8 @@ CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_SERIAL_XILINX_PS_UART=y
 CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
 CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
 CONFIG_VIRTIO_CONSOLE=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
@@ -280,6 +286,7 @@ CONFIG_SPI_ROCKCHIP=y
 CONFIG_SPI_S3C64XX=y
 CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
+CONFIG_PINCTRL_IPQ8074=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_MAX77620=y
 CONFIG_PINCTRL_MSM8916=y
@@ -298,6 +305,7 @@ CONFIG_GPIO_MAX77620=y
 CONFIG_POWER_RESET_MSM=y
 CONFIG_POWER_RESET_XGENE=y
 CONFIG_POWER_RESET_SYSCON=y
+CONFIG_SYSCON_REBOOT_MODE=y
 CONFIG_BATTERY_BQ27XXX=y
 CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_SENSORS_LM90=m
@@ -305,6 +313,7 @@ CONFIG_SENSORS_INA2XX=m
 CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
 CONFIG_CPU_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
+CONFIG_BRCMSTB_THERMAL=m
 CONFIG_EXYNOS_THERMAL=y
 CONFIG_ROCKCHIP_THERMAL=m
 CONFIG_WATCHDOG=y
@@ -312,19 +321,24 @@ CONFIG_S3C2410_WATCHDOG=y
 CONFIG_MESON_GXBB_WATCHDOG=m
 CONFIG_MESON_WATCHDOG=m
 CONFIG_RENESAS_WDT=y
+CONFIG_UNIPHIER_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
+CONFIG_MFD_AXP20X_RSB=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_I2C=y
 CONFIG_MFD_CROS_EC_SPI=y
 CONFIG_MFD_EXYNOS_LPASS=m
+CONFIG_MFD_HI6421_PMIC=y
 CONFIG_MFD_HI655X_PMIC=y
 CONFIG_MFD_MAX77620=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK808=y
 CONFIG_MFD_SEC_CORE=y
+CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_FAN53555=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_HI6421V530=y
 CONFIG_REGULATOR_HI655X=y
 CONFIG_REGULATOR_MAX77620=y
 CONFIG_REGULATOR_PWM=y
@@ -359,6 +373,12 @@ CONFIG_DRM_EXYNOS_DSI=y
 # CONFIG_DRM_EXYNOS_DP is not set
 CONFIG_DRM_EXYNOS_HDMI=y
 CONFIG_DRM_EXYNOS_MIC=y
+CONFIG_DRM_ROCKCHIP=m
+CONFIG_ROCKCHIP_ANALOGIX_DP=y
+CONFIG_ROCKCHIP_CDN_DP=y
+CONFIG_ROCKCHIP_DW_HDMI=y
+CONFIG_ROCKCHIP_DW_MIPI_DSI=y
+CONFIG_ROCKCHIP_INNO_HDMI=y
 CONFIG_DRM_RCAR_DU=m
 CONFIG_DRM_RCAR_LVDS=y
 CONFIG_DRM_RCAR_VSP=y
@@ -371,6 +391,7 @@ CONFIG_DRM_MESON=m
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PWM=m
 CONFIG_BACKLIGHT_LP855X=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
@@ -381,8 +402,8 @@ CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_BCM2835_SOC_I2S=m
 CONFIG_SND_SOC_SAMSUNG=y
-CONFIG_SND_SOC_RCAR=y
+CONFIG_SND_SOC_RCAR=m
-CONFIG_SND_SOC_AK4613=y
+CONFIG_SND_SOC_AK4613=m
 CONFIG_SND_SIMPLE_CARD=y
 CONFIG_USB=y
 CONFIG_USB_OTG=y
@@ -404,6 +425,7 @@ CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_USB_ISP1760=y
 CONFIG_USB_HSIC_USB3503=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_MSM_OTG=y
 CONFIG_USB_QCOM_8X16_PHY=y
 CONFIG_USB_ULPI=y
@@ -452,6 +474,7 @@ CONFIG_RTC_DRV_TEGRA=y
 CONFIG_RTC_DRV_XGENE=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2835=m
+CONFIG_K3_DMA=y
 CONFIG_MV_XOR_V2=y
 CONFIG_PL330_DMA=y
 CONFIG_TEGRA20_APB_DMA=y
@@ -474,6 +497,7 @@ CONFIG_CLK_QORIQ=y
 CONFIG_COMMON_CLK_PWM=y
 CONFIG_COMMON_CLK_QCOM=y
 CONFIG_QCOM_CLK_SMD_RPM=y
+CONFIG_IPQ_GCC_8074=y
 CONFIG_MSM_GCC_8916=y
 CONFIG_MSM_GCC_8994=y
 CONFIG_MSM_MMCC_8996=y
@@ -483,6 +507,7 @@ CONFIG_ARM_MHU=y
 CONFIG_PLATFORM_MHU=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_HI6220_MBOX=y
+CONFIG_ROCKCHIP_IOMMU=y
 CONFIG_ARM_SMMU=y
 CONFIG_ARM_SMMU_V3=y
 CONFIG_RPMSG_QCOM_SMD=y
@@ -516,6 +541,8 @@ CONFIG_PHY_XGENE=y
 CONFIG_PHY_TEGRA_XUSB=y
 CONFIG_QCOM_L2_PMU=y
 CONFIG_QCOM_L3_PMU=y
+CONFIG_TEE=y
+CONFIG_OPTEE=y
 CONFIG_ARM_SCPI_PROTOCOL=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_EFI_CAPSULE_LOADER=y
@@ -564,8 +591,17 @@ CONFIG_SECURITY=y
 CONFIG_CRYPTO_ECHAINIV=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_ARM64_CRYPTO=y
+CONFIG_CRYPTO_SHA256_ARM64=m
+CONFIG_CRYPTO_SHA512_ARM64=m
 CONFIG_CRYPTO_SHA1_ARM64_CE=y
 CONFIG_CRYPTO_SHA2_ARM64_CE=y
 CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
+CONFIG_CRYPTO_CRC32_ARM64_CE=m
+CONFIG_CRYPTO_AES_ARM64=m
+CONFIG_CRYPTO_AES_ARM64_CE=m
 CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
 CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_CRYPTO_AES_ARM64_BS=m

drivers/bus/omap-ocp2scp.c

@@ -70,8 +70,10 @@ static int omap_ocp2scp_probe(struct platform_device *pdev)
 	if (!of_device_is_compatible(np, "ti,am437x-ocp2scp")) {
 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 		regs = devm_ioremap_resource(&pdev->dev, res);
-		if (IS_ERR(regs))
+		if (IS_ERR(regs)) {
-			goto err0;
+			ret = PTR_ERR(regs);
+			goto err1;
+		}
 
 		pm_runtime_get_sync(&pdev->dev);
 		reg = readl_relaxed(regs + OCP2SCP_TIMING);
@@ -83,6 +85,9 @@ static int omap_ocp2scp_probe(struct platform_device *pdev)
 
 	return 0;
 
+err1:
+	pm_runtime_disable(&pdev->dev);
+
 err0:
 	device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
 

drivers/soc/versatile/soc-realview.c

@@ -85,7 +85,7 @@ static struct device_attribute realview_build_attr =
 
 static int realview_soc_probe(struct platform_device *pdev)
 {
-	static struct regmap *syscon_regmap;
+	struct regmap *syscon_regmap;
 	struct soc_device *soc_dev;
 	struct soc_device_attribute *soc_dev_attr;
 	struct device_node *np = pdev->dev.of_node;

include/linux/platform_data/hsmmc-omap.h

@@ -67,6 +67,9 @@ struct omap_hsmmc_platform_data {
 #define HSMMC_HAS_HSPE_SUPPORT	(1 << 2)
 	unsigned features;
 
+	/* string specifying a particular variant of hardware */
+	char *version;
+
 	int gpio_cd;			/* gpio (card detect) */
 	int gpio_cod;			/* gpio (cover detect) */
 	int gpio_wp;			/* gpio (write protect) */