korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-24 04:34:08 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge branches 'x86/apic', 'x86/asm', 'x86/mm' and 'x86/platform' into x86/core, to merge last updates

Browse Source 
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit is contained in:
Ingo Molnar 2015-06-22 09:15:03 +02:00
commit 7ef3d7d58d
643 changed files with 9093 additions and 5866 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/ABI/testing/sysfs-devices-system-cpu
View File

@ -162,7 +162,7 @@ Description: Discover CPUs in the same CPU frequency coordination domain
What: /sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1}
Date: August 2008
KernelVersion: 2.6.27
Contact: discuss@x86-64.org
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: Disable L3 cache indices
These files exist in every CPU's cache/index3 directory. Each

4
Documentation/devicetree/bindings/clock/silabs,si5351.txt
View File

@ -17,7 +17,8 @@ Required properties:
- #clock-cells: from common clock binding; shall be set to 1.
- clocks: from common clock binding; list of parent clock
handles, shall be xtal reference clock or xtal and clkin for
si5351c only.
si5351c only. Corresponding clock input names are "xtal" and
"clkin" respectively.
- #address-cells: shall be set to 1.
- #size-cells: shall be set to 0.
@ -71,6 +72,7 @@ i2c-master-node {
/* connect xtal input to 25MHz reference */
clocks = <&ref25>;
clock-names = "xtal";
/* connect xtal input as source of pll0 and pll1 */
silabs,pll-source = <0 0>, <1 0>;

6
Documentation/devicetree/bindings/mtd/m25p80.txt → Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
View File

@ -8,8 +8,8 @@ Required properties:
is not Linux-only, but in case of Linux, see the "m25p_ids"
table in drivers/mtd/devices/m25p80.c for the list of supported
chips.
Must also include "nor-jedec" for any SPI NOR flash that can be
identified by the JEDEC READ ID opcode (0x9F).
Must also include "jedec,spi-nor" for any SPI NOR flash that can
be identified by the JEDEC READ ID opcode (0x9F).
- reg : Chip-Select number
- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
@ -25,7 +25,7 @@ Example:
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,m25p80", "nor-jedec";
compatible = "spansion,m25p80", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
m25p,fast-read;

3
Documentation/devicetree/bindings/net/cdns-emac.txt
View File

@ -3,7 +3,8 @@
Required properties:
- compatible: Should be "cdns,[<chip>-]{emac}"
Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
or the generic form: "cdns,emac".
Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
Or the generic form: "cdns,emac".
- reg: Address and length of the register set for the device
- interrupts: Should contain macb interrupt
- phy-mode: see ethernet.txt file in the same directory.

2
Documentation/hwmon/tmp401
View File

@ -20,7 +20,7 @@ Supported chips:
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp432.html
* Texas Instruments TMP435
Prefix: 'tmp435'
Addresses scanned: I2C 0x37, 0x48 - 0x4f
Addresses scanned: I2C 0x48 - 0x4f
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html
Authors:

6
Documentation/memory-barriers.txt
View File

@ -1662,7 +1662,7 @@ CPU from reordering them.
There are some more advanced barrier functions:
(*) set_mb(var, value)
(*) smp_store_mb(var, value)
This assigns the value to the variable and then inserts a full memory
barrier after it, depending on the function. It isn't guaranteed to
@ -1975,7 +1975,7 @@ after it has altered the task state:
CPU 1
===============================
set_current_state();
set_mb();
smp_store_mb();
STORE current->state
<general barrier>
LOAD event_indicated
@ -2016,7 +2016,7 @@ between the STORE to indicate the event and the STORE to set TASK_RUNNING:
CPU 1 CPU 2
=============================== ===============================
set_current_state(); STORE event_indicated
set_mb(); wake_up();
smp_store_mb(); wake_up();
STORE current->state <write barrier>
<general barrier> STORE current->state
LOAD event_indicated

33
Documentation/target/tcmu-design.txt
View File

@ -15,8 +15,7 @@ Contents:
a) Discovering and configuring TCMU uio devices
b) Waiting for events on the device(s)
c) Managing the command ring
3) Command filtering and pass_level
4) A final note
3) A final note
TCM Userspace Design
@ -324,7 +323,7 @@ int handle_device_events(int fd, void *map)
/* Process events from cmd ring until we catch up with cmd_head */
while (ent != (void *)mb + mb->cmdr_off + mb->cmd_head) {
if (tcmu_hdr_get_op(&ent->hdr) == TCMU_OP_CMD) {
if (tcmu_hdr_get_op(ent->hdr.len_op) == TCMU_OP_CMD) {
uint8_t *cdb = (void *)mb + ent->req.cdb_off;
bool success = true;
@ -339,8 +338,12 @@ int handle_device_events(int fd, void *map)
ent->rsp.scsi_status = SCSI_CHECK_CONDITION;
}
}
else if (tcmu_hdr_get_op(ent->hdr.len_op) != TCMU_OP_PAD) {
/* Tell the kernel we didn't handle unknown opcodes */
ent->hdr.uflags |= TCMU_UFLAG_UNKNOWN_OP;
}
else {
/* Do nothing for PAD entries */
/* Do nothing for PAD entries except update cmd_tail */
}
/* update cmd_tail */
@ -360,28 +363,6 @@ int handle_device_events(int fd, void *map)
}
Command filtering and pass_level
--------------------------------
TCMU supports a "pass_level" option with valid values of 0 or 1. When
the value is 0 (the default), nearly all SCSI commands received for
the device are passed through to the handler. This allows maximum
flexibility but increases the amount of code required by the handler,
to support all mandatory SCSI commands. If pass_level is set to 1,
then only IO-related commands are presented, and the rest are handled
by LIO's in-kernel command emulation. The commands presented at level
1 include all versions of:
READ
WRITE
WRITE_VERIFY
XDWRITEREAD
WRITE_SAME
COMPARE_AND_WRITE
SYNCHRONIZE_CACHE
UNMAP
A final note
------------

18
Documentation/virtual/kvm/mmu.txt
View File

@ -169,6 +169,10 @@ Shadow pages contain the following information:
Contains the value of cr4.smep && !cr0.wp for which the page is valid
(pages for which this is true are different from other pages; see the
treatment of cr0.wp=0 below).
role.smap_andnot_wp:
Contains the value of cr4.smap && !cr0.wp for which the page is valid
(pages for which this is true are different from other pages; see the
treatment of cr0.wp=0 below).
gfn:
Either the guest page table containing the translations shadowed by this
page, or the base page frame for linear translations. See role.direct.
@ -344,10 +348,16 @@ on fault type:
(user write faults generate a #PF)
In the first case there is an additional complication if CR4.SMEP is
enabled: since we've turned the page into a kernel page, the kernel may now
execute it. We handle this by also setting spte.nx. If we get a user
fetch or read fault, we'll change spte.u=1 and spte.nx=gpte.nx back.
In the first case there are two additional complications:
- if CR4.SMEP is enabled: since we've turned the page into a kernel page,
the kernel may now execute it. We handle this by also setting spte.nx.
If we get a user fetch or read fault, we'll change spte.u=1 and
spte.nx=gpte.nx back.
- if CR4.SMAP is disabled: since the page has been changed to a kernel
page, it can not be reused when CR4.SMAP is enabled. We set
CR4.SMAP && !CR0.WP into shadow page's role to avoid this case. Note,
here we do not care the case that CR4.SMAP is enabled since KVM will
directly inject #PF to guest due to failed permission check.
To prevent an spte that was converted into a kernel page with cr0.wp=0
from being written by the kernel after cr0.wp has changed to 1, we make

4
Documentation/x86/entry_64.txt
View File

@ -18,10 +18,10 @@ Some of these entries are:
- system_call: syscall instruction from 64-bit code.
- ia32_syscall: int 0x80 from 32-bit or 64-bit code; compat syscall
- entry_INT80_compat: int 0x80 from 32-bit or 64-bit code; compat syscall
either way.
- ia32_syscall, ia32_sysenter: syscall and sysenter from 32-bit
- entry_INT80_compat, ia32_sysenter: syscall and sysenter from 32-bit
code
- interrupt: An array of entries. Every IDT vector that doesn't

18
Documentation/x86/mtrr.txt
View File

@ -1,7 +1,19 @@
MTRR (Memory Type Range Register) control
3 Jun 1999
Richard Gooch
<rgooch@atnf.csiro.au>
Richard Gooch <rgooch@atnf.csiro.au> - 3 Jun 1999
Luis R. Rodriguez <mcgrof@do-not-panic.com> - April 9, 2015
===============================================================================
Phasing out MTRR use
MTRR use is replaced on modern x86 hardware with PAT. Over time the only type
of effective MTRR that is expected to be supported will be for write-combining.
As MTRR use is phased out device drivers should use arch_phys_wc_add() to make
MTRR effective on non-PAT systems while a no-op on PAT enabled systems.
For details refer to Documentation/x86/pat.txt.
===============================================================================
On Intel P6 family processors (Pentium Pro, Pentium II and later)
the Memory Type Range Registers (MTRRs) may be used to control

46
Documentation/x86/pat.txt
View File

@ -12,7 +12,7 @@ virtual addresses.
PAT allows for different types of memory attributes. The most commonly used
ones that will be supported at this time are Write-back, Uncached,
Write-combined and Uncached Minus.
Write-combined, Write-through and Uncached Minus.
PAT APIs
@ -34,16 +34,23 @@ ioremap | -- | UC- | UC- |
| | | |
ioremap_cache | -- | WB | WB |
| | | |
ioremap_uc | -- | UC | UC |
| | | |
ioremap_nocache | -- | UC- | UC- |
| | | |
ioremap_wc | -- | -- | WC |
| | | |
ioremap_wt | -- | -- | WT |
| | | |
set_memory_uc | UC- | -- | -- |
set_memory_wb | | | |
| | | |
set_memory_wc | WC | -- | -- |
set_memory_wb | | | |
| | | |
set_memory_wt | WT | -- | -- |
set_memory_wb | | | |
| | | |
pci sysfs resource | -- | -- | UC- |
| | | |
pci sysfs resource_wc | -- | -- | WC |
@ -102,7 +109,38 @@ wants to export a RAM region, it has to do set_memory_uc() or set_memory_wc()
as step 0 above and also track the usage of those pages and use set_memory_wb()
before the page is freed to free pool.
MTRR effects on PAT / non-PAT systems
-------------------------------------
The following table provides the effects of using write-combining MTRRs when
using ioremap*() calls on x86 for both non-PAT and PAT systems. Ideally
mtrr_add() usage will be phased out in favor of arch_phys_wc_add() which will
be a no-op on PAT enabled systems. The region over which a arch_phys_wc_add()
is made, should already have been ioremapped with WC attributes or PAT entries,
this can be done by using ioremap_wc() / set_memory_wc(). Devices which
combine areas of IO memory desired to remain uncacheable with areas where
write-combining is desirable should consider use of ioremap_uc() followed by
set_memory_wc() to white-list effective write-combined areas. Such use is
nevertheless discouraged as the effective memory type is considered
implementation defined, yet this strategy can be used as last resort on devices
with size-constrained regions where otherwise MTRR write-combining would
otherwise not be effective.
----------------------------------------------------------------------
MTRR Non-PAT PAT Linux ioremap value Effective memory type
----------------------------------------------------------------------
Non-PAT | PAT
PAT
|PCD
||PWT
|||
WC 000 WB _PAGE_CACHE_MODE_WB WC | WC
WC 001 WC _PAGE_CACHE_MODE_WC WC* | WC
WC 010 UC- _PAGE_CACHE_MODE_UC_MINUS WC* | UC
WC 011 UC _PAGE_CACHE_MODE_UC UC | UC
----------------------------------------------------------------------
(*) denotes implementation defined and is discouraged
Notes:
@ -115,8 +153,8 @@ can be more restrictive, in case of any existing aliasing for that address.
For example: If there is an existing uncached mapping, a new ioremap_wc can
return uncached mapping in place of write-combine requested.
set_memory_[uc|wc] and set_memory_wb should be used in pairs, where driver will
first make a region uc or wc and switch it back to wb after use.
set_memory_[uc|wc|wt] and set_memory_wb should be used in pairs, where driver
will first make a region uc, wc or wt and switch it back to wb after use.
Over time writes to /proc/mtrr will be deprecated in favor of using PAT based
interfaces. Users writing to /proc/mtrr are suggested to use above interfaces.
@ -124,7 +162,7 @@ interfaces. Users writing to /proc/mtrr are suggested to use above interfaces.
Drivers should use ioremap_[uc|wc] to access PCI BARs with [uc|wc] access
types.
Drivers should use set_memory_[uc|wc] to set access type for RAM ranges.
Drivers should use set_memory_[uc|wc|wt] to set access type for RAM ranges.
PAT debugging

3
Documentation/x86/x86_64/boot-options.txt
View File

@ -31,6 +31,9 @@ Machine check
(e.g. BIOS or hardware monitoring applications), conflicting
with OS's error handling, and you cannot deactivate the agent,
then this option will be a help.
mce=no_lmce
Do not opt-in to Local MCE delivery. Use legacy method
to broadcast MCEs.
mce=bootlog
Enable logging of machine checks left over from booting.
Disabled by default on AMD because some BIOS leave bogus ones.

21
MAINTAINERS
View File

@ -2427,7 +2427,6 @@ L: linux-security-module@vger.kernel.org
S: Supported
F: include/linux/capability.h
F: include/uapi/linux/capability.h
F: security/capability.c
F: security/commoncap.c
F: kernel/capability.c
@ -3825,10 +3824,11 @@ M: David Woodhouse <dwmw2@infradead.org>
L: linux-embedded@vger.kernel.org
S: Maintained
EMULEX LPFC FC SCSI DRIVER
M: James Smart <james.smart@emulex.com>
EMULEX/AVAGO LPFC FC/FCOE SCSI DRIVER
M: James Smart <james.smart@avagotech.com>
M: Dick Kennedy <dick.kennedy@avagotech.com>
L: linux-scsi@vger.kernel.org
W: http://sourceforge.net/projects/lpfcxxxx
W: http://www.avagotech.com
S: Supported
F: drivers/scsi/lpfc/
@ -4536,7 +4536,7 @@ M: Jean Delvare <jdelvare@suse.de>
M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
T: quilt http://jdelvare.nerim.net/devel/linux/jdelvare-hwmon/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
S: Maintained
F: Documentation/hwmon/
@ -8829,9 +8829,11 @@ F: drivers/misc/phantom.c
F: include/uapi/linux/phantom.h
SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
M: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
M: Jayamohan Kallickal <jayamohan.kallickal@avagotech.com>
M: Minh Tran <minh.tran@avagotech.com>
M: John Soni Jose <sony.john-n@avagotech.com>
L: linux-scsi@vger.kernel.org
W: http://www.emulex.com
W: http://www.avagotech.com
S: Supported
F: drivers/scsi/be2iscsi/
@ -10585,8 +10587,7 @@ F: drivers/virtio/virtio_input.c
F: include/uapi/linux/virtio_input.h
VIA RHINE NETWORK DRIVER
M: Roger Luethi <rl@hellgate.ch>
S: Maintained
S: Orphan
F: drivers/net/ethernet/via/via-rhine.c
VIA SD/MMC CARD CONTROLLER DRIVER
@ -10892,7 +10893,7 @@ M: Andy Lutomirski <luto@amacapital.net>
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/vdso
S: Maintained
F: arch/x86/vdso/
F: arch/x86/entry/vdso/
XC2028/3028 TUNER DRIVER
M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 1
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc6
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*

16
arch/alpha/boot/Makefile
View File

@ -14,6 +14,9 @@ targets := vmlinux.gz vmlinux \
tools/bootpzh bootloader bootpheader bootpzheader
OBJSTRIP := $(obj)/tools/objstrip
HOSTCFLAGS := -Wall -I$(objtree)/usr/include
BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj)
# SRM bootable image. Copy to offset 512 of a partition.
$(obj)/bootimage: $(addprefix $(obj)/tools/,mkbb lxboot bootlx) $(obj)/vmlinux.nh
( cat $(obj)/tools/lxboot $(obj)/tools/bootlx $(obj)/vmlinux.nh ) > $@
@ -96,13 +99,14 @@ $(obj)/tools/bootph: $(obj)/bootpheader $(OBJSTRIP) FORCE
$(obj)/tools/bootpzh: $(obj)/bootpzheader $(OBJSTRIP) FORCE
$(call if_changed,objstrip)
LDFLAGS_bootloader := -static -uvsprintf -T #-N -relax
LDFLAGS_bootpheader := -static -uvsprintf -T #-N -relax
LDFLAGS_bootpzheader := -static -uvsprintf -T #-N -relax
LDFLAGS_bootloader := -static -T # -N -relax
LDFLAGS_bootloader := -static -T # -N -relax
LDFLAGS_bootpheader := -static -T # -N -relax
LDFLAGS_bootpzheader := -static -T # -N -relax
OBJ_bootlx := $(obj)/head.o $(obj)/main.o
OBJ_bootph := $(obj)/head.o $(obj)/bootp.o
OBJ_bootpzh := $(obj)/head.o $(obj)/bootpz.o $(obj)/misc.o
OBJ_bootlx := $(obj)/head.o $(obj)/stdio.o $(obj)/main.o
OBJ_bootph := $(obj)/head.o $(obj)/stdio.o $(obj)/bootp.o
OBJ_bootpzh := $(obj)/head.o $(obj)/stdio.o $(obj)/bootpz.o $(obj)/misc.o
$(obj)/bootloader: $(obj)/bootloader.lds $(OBJ_bootlx) $(LIBS_Y) FORCE
$(call if_changed,ld)

1
arch/alpha/boot/main.c
View File

@ -19,7 +19,6 @@
#include "ksize.h"
extern int vsprintf(char *, const char *, va_list);
extern unsigned long switch_to_osf_pal(unsigned long nr,
struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa,
unsigned long *vptb);

306
arch/alpha/boot/stdio.c Normal file
View File

@ -0,0 +1,306 @@
/*
* Copyright (C) Paul Mackerras 1997.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <stdarg.h>
#include <stddef.h>
size_t strnlen(const char * s, size_t count)
{
const char *sc;
for (sc = s; count-- && *sc != '\0'; ++sc)
/* nothing */;
return sc - s;
}
# define do_div(n, base) ({ \
unsigned int __base = (base); \
unsigned int __rem; \
__rem = ((unsigned long long)(n)) % __base; \
(n) = ((unsigned long long)(n)) / __base; \
__rem; \
})
static int skip_atoi(const char **s)
{
int i, c;
for (i = 0; '0' <= (c = **s) && c <= '9'; ++*s)
i = i*10 + c - '0';
return i;
}
#define ZEROPAD 1 /* pad with zero */
#define SIGN 2 /* unsigned/signed long */
#define PLUS 4 /* show plus */
#define SPACE 8 /* space if plus */
#define LEFT 16 /* left justified */
#define SPECIAL 32 /* 0x */
#define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */
static char * number(char * str, unsigned long long num, int base, int size, int precision, int type)
{
char c,sign,tmp[66];
const char *digits="0123456789abcdefghijklmnopqrstuvwxyz";
int i;
if (type & LARGE)
digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ";
if (type & LEFT)
type &= ~ZEROPAD;
if (base < 2 || base > 36)
return 0;
c = (type & ZEROPAD) ? '0' : ' ';
sign = 0;
if (type & SIGN) {
if ((signed long long)num < 0) {
sign = '-';
num = - (signed long long)num;
size--;
} else if (type & PLUS) {
sign = '+';
size--;
} else if (type & SPACE) {
sign = ' ';
size--;
}
}
if (type & SPECIAL) {
if (base == 16)
size -= 2;
else if (base == 8)
size--;
}
i = 0;
if (num == 0)
tmp[i++]='0';
else while (num != 0) {
tmp[i++] = digits[do_div(num, base)];
}
if (i > precision)
precision = i;
size -= precision;
if (!(type&(ZEROPAD+LEFT)))
while(size-->0)
*str++ = ' ';
if (sign)
*str++ = sign;
if (type & SPECIAL) {
if (base==8)
*str++ = '0';
else if (base==16) {
*str++ = '0';
*str++ = digits[33];
}
}
if (!(type & LEFT))
while (size-- > 0)
*str++ = c;
while (i < precision--)
*str++ = '0';
while (i-- > 0)
*str++ = tmp[i];
while (size-- > 0)
*str++ = ' ';
return str;
}
int vsprintf(char *buf, const char *fmt, va_list args)
{
int len;
unsigned long long num;
int i, base;
char * str;
const char *s;
int flags; /* flags to number() */
int field_width; /* width of output field */
int precision; /* min. # of digits for integers; max
number of chars for from string */
int qualifier; /* 'h', 'l', or 'L' for integer fields */
/* 'z' support added 23/7/1999 S.H. */
/* 'z' changed to 'Z' --davidm 1/25/99 */
for (str=buf ; *fmt ; ++fmt) {
if (*fmt != '%') {
*str++ = *fmt;
continue;
}
/* process flags */
flags = 0;
repeat:
++fmt; /* this also skips first '%' */
switch (*fmt) {
case '-': flags |= LEFT; goto repeat;
case '+': flags |= PLUS; goto repeat;
case ' ': flags |= SPACE; goto repeat;
case '#': flags |= SPECIAL; goto repeat;
case '0': flags |= ZEROPAD; goto repeat;
}
/* get field width */
field_width = -1;
if ('0' <= *fmt && *fmt <= '9')
field_width = skip_atoi(&fmt);
else if (*fmt == '*') {
++fmt;
/* it's the next argument */
field_width = va_arg(args, int);
if (field_width < 0) {
field_width = -field_width;
flags |= LEFT;
}
}
/* get the precision */
precision = -1;
if (*fmt == '.') {
++fmt;
if ('0' <= *fmt && *fmt <= '9')
precision = skip_atoi(&fmt);
else if (*fmt == '*') {
++fmt;
/* it's the next argument */
precision = va_arg(args, int);
}
if (precision < 0)
precision = 0;
}
/* get the conversion qualifier */
qualifier = -1;
if (*fmt == 'l' && *(fmt + 1) == 'l') {
qualifier = 'q';
fmt += 2;
} else if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L'
|| *fmt == 'Z') {
qualifier = *fmt;
++fmt;
}
/* default base */
base = 10;
switch (*fmt) {
case 'c':
if (!(flags & LEFT))
while (--field_width > 0)
*str++ = ' ';
*str++ = (unsigned char) va_arg(args, int);
while (--field_width > 0)
*str++ = ' ';
continue;
case 's':
s = va_arg(args, char *);
if (!s)
s = "<NULL>";
len = strnlen(s, precision);
if (!(flags & LEFT))
while (len < field_width--)
*str++ = ' ';
for (i = 0; i < len; ++i)
*str++ = *s++;
while (len < field_width--)
*str++ = ' ';
continue;
case 'p':
if (field_width == -1) {
field_width = 2*sizeof(void *);
flags |= ZEROPAD;
}
str = number(str,
(unsigned long) va_arg(args, void *), 16,
field_width, precision, flags);
continue;
case 'n':
if (qualifier == 'l') {
long * ip = va_arg(args, long *);
*ip = (str - buf);
} else if (qualifier == 'Z') {
size_t * ip = va_arg(args, size_t *);
*ip = (str - buf);
} else {
int * ip = va_arg(args, int *);
*ip = (str - buf);
}
continue;
case '%':
*str++ = '%';
continue;
/* integer number formats - set up the flags and "break" */
case 'o':
base = 8;
break;
case 'X':
flags |= LARGE;
case 'x':
base = 16;
break;
case 'd':
case 'i':
flags |= SIGN;
case 'u':
break;
default:
*str++ = '%';
if (*fmt)
*str++ = *fmt;
else
--fmt;
continue;
}
if (qualifier == 'l') {
num = va_arg(args, unsigned long);
if (flags & SIGN)
num = (signed long) num;
} else if (qualifier == 'q') {
num = va_arg(args, unsigned long long);
if (flags & SIGN)
num = (signed long long) num;
} else if (qualifier == 'Z') {
num = va_arg(args, size_t);
} else if (qualifier == 'h') {
num = (unsigned short) va_arg(args, int);
if (flags & SIGN)
num = (signed short) num;
} else {
num = va_arg(args, unsigned int);
if (flags & SIGN)
num = (signed int) num;
}
str = number(str, num, base, field_width, precision, flags);
}
*str = '\0';
return str-buf;
}
int sprintf(char * buf, const char *fmt, ...)
{
va_list args;
int i;
va_start(args, fmt);
i=vsprintf(buf,fmt,args);
va_end(args);
return i;
}

3
arch/alpha/boot/tools/objstrip.c
View File

@ -27,6 +27,9 @@
#include <linux/param.h>
#ifdef __ELF__
# include <linux/elf.h>
# define elfhdr elf64_hdr
# define elf_phdr elf64_phdr
# define elf_check_arch(x) ((x)->e_machine == EM_ALPHA)
#endif
/* bootfile size must be multiple of BLOCK_SIZE: */

2
arch/alpha/include/asm/cmpxchg.h
View File

@ -66,6 +66,4 @@
#undef __ASM__MB
#undef ____cmpxchg
#define __HAVE_ARCH_CMPXCHG 1
#endif /* _ALPHA_CMPXCHG_H */

1
arch/alpha/include/asm/types.h
View File

@ -2,6 +2,5 @@
#define _ALPHA_TYPES_H
#include <asm-generic/int-ll64.h>
#include <uapi/asm/types.h>
#endif /* _ALPHA_TYPES_H */

2
arch/alpha/include/asm/unistd.h
View File

@ -3,7 +3,7 @@
#include <uapi/asm/unistd.h>
#define NR_SYSCALLS 511
#define NR_SYSCALLS 514
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_STAT64

3
arch/alpha/include/uapi/asm/unistd.h
View File

@ -472,5 +472,8 @@
#define __NR_sched_setattr 508
#define __NR_sched_getattr 509
#define __NR_renameat2 510
#define __NR_getrandom 511
#define __NR_memfd_create 512
#define __NR_execveat 513
#endif /* _UAPI_ALPHA_UNISTD_H */

1
arch/alpha/kernel/err_ev6.c
View File

@ -6,7 +6,6 @@
* Error handling code supporting Alpha systems
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <asm/io.h>

1
arch/alpha/kernel/irq.c
View File

@ -19,7 +19,6 @@
#include <linux/ptrace.h>
#include <linux/interrupt.h>
#include <linux/random.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>

3
arch/alpha/kernel/osf_sys.c
View File

@ -1019,14 +1019,13 @@ SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv,
if (tv) {
if (get_tv32((struct timeval *)&kts, tv))
return -EFAULT;
kts.tv_nsec *= 1000;
}
if (tz) {
if (copy_from_user(&ktz, tz, sizeof(*tz)))
return -EFAULT;
}
kts.tv_nsec *= 1000;
return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
}

7
arch/alpha/kernel/process.c
View File

@ -236,12 +236,11 @@ release_thread(struct task_struct *dead_task)
}
/*
* Copy an alpha thread..
* Copy architecture-specific thread state
*/
int
copy_thread(unsigned long clone_flags, unsigned long usp,
unsigned long arg,
unsigned long kthread_arg,
struct task_struct *p)
{
extern void ret_from_fork(void);
@ -262,7 +261,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp,
sizeof(struct switch_stack) + sizeof(struct pt_regs));
childstack->r26 = (unsigned long) ret_from_kernel_thread;
childstack->r9 = usp; /* function */
childstack->r10 = arg;
childstack->r10 = kthread_arg;
childregs->hae = alpha_mv.hae_cache,
childti->pcb.usp = 0;
return 0;

8
arch/alpha/kernel/smp.c
View File

@ -63,7 +63,6 @@ static struct {
enum ipi_message_type {
IPI_RESCHEDULE,
IPI_CALL_FUNC,
IPI_CALL_FUNC_SINGLE,
IPI_CPU_STOP,
};
@ -506,7 +505,6 @@ setup_profiling_timer(unsigned int multiplier)
return -EINVAL;
}
static void
send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
{
@ -552,10 +550,6 @@ handle_ipi(struct pt_regs *regs)
generic_smp_call_function_interrupt();
break;
case IPI_CALL_FUNC_SINGLE:
generic_smp_call_function_single_interrupt();
break;
case IPI_CPU_STOP:
halt();
@ -606,7 +600,7 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask)
void arch_send_call_function_single_ipi(int cpu)
{
send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC);
}
static void

3
arch/alpha/kernel/srmcons.c
View File

@ -237,8 +237,7 @@ srmcons_init(void)
return -ENODEV;
}
module_init(srmcons_init);
device_initcall(srmcons_init);
/*

2
arch/alpha/kernel/sys_marvel.c
View File

@ -331,7 +331,7 @@ marvel_map_irq(const struct pci_dev *cdev, u8 slot, u8 pin)
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &intline);
irq = intline;
msi_loc = pci_find_capability(dev, PCI_CAP_ID_MSI);
msi_loc = dev->msi_cap;
msg_ctl = 0;
if (msi_loc)
pci_read_config_word(dev, msi_loc + PCI_MSI_FLAGS, &msg_ctl);

3
arch/alpha/kernel/systbls.S
View File

@ -529,6 +529,9 @@ sys_call_table:
.quad sys_sched_setattr
.quad sys_sched_getattr
.quad sys_renameat2 /* 510 */
.quad sys_getrandom
.quad sys_memfd_create
.quad sys_execveat
.size sys_call_table, . - sys_call_table
.type sys_call_table, @object

1
arch/alpha/kernel/traps.c
View File

@ -14,7 +14,6 @@
#include <linux/tty.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kallsyms.h>
#include <linux/ratelimit.h>

1
arch/alpha/oprofile/op_model_ev4.c
View File

@ -8,7 +8,6 @@
*/
#include <linux/oprofile.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <asm/ptrace.h>

1
arch/alpha/oprofile/op_model_ev5.c
View File

@ -8,7 +8,6 @@
*/
#include <linux/oprofile.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <asm/ptrace.h>

1
arch/alpha/oprofile/op_model_ev6.c
View File

@ -8,7 +8,6 @@
*/
#include <linux/oprofile.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <asm/ptrace.h>

1
arch/alpha/oprofile/op_model_ev67.c
View File

@ -9,7 +9,6 @@
*/
#include <linux/oprofile.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <asm/ptrace.h>

1
arch/arc/include/asm/io.h
View File

@ -20,6 +20,7 @@ extern void iounmap(const void __iomem *addr);
#define ioremap_nocache(phy, sz) ioremap(phy, sz)
#define ioremap_wc(phy, sz) ioremap(phy, sz)
#define ioremap_wt(phy, sz) ioremap(phy, sz)
/* Change struct page to physical address */
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)

2
arch/arm/boot/dts/Makefile
View File

@ -223,7 +223,7 @@ dtb-$(CONFIG_SOC_IMX25) += \
imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
imx25-karo-tx25.dtb \
imx25-pdk.dtb
dtb-$(CONFIG_SOC_IMX31) += \
dtb-$(CONFIG_SOC_IMX27) += \
imx27-apf27.dtb \
imx27-apf27dev.dtb \
imx27-eukrea-mbimxsd27-baseboard.dtb \

4
arch/arm/boot/dts/am335x-boneblack.dts
View File

@ -80,7 +80,3 @@
status = "okay";
};
};
&rtc {
system-power-controller;
};

2
arch/arm/boot/dts/am335x-evmsk.dts
View File

@ -654,7 +654,7 @@
wlcore: wlcore@2 {
compatible = "ti,wl1271";
reg = <2>;
interrupt-parent = <&gpio1>;
interrupt-parent = <&gpio0>;
interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
ref-clock-frequency = <38400000>;
};

2
arch/arm/boot/dts/exynos4412-trats2.dts
View File

@ -736,7 +736,7 @@
display-timings {
timing-0 {
clock-frequency = <0>;
clock-frequency = <57153600>;
hactive = <720>;
vactive = <1280>;
hfront-porch = <5>;

2
arch/arm/boot/dts/imx27.dtsi
View File

@ -533,7 +533,7 @@
fec: ethernet@1002b000 {
compatible = "fsl,imx27-fec";
reg = <0x1002b000 0x4000>;
reg = <0x1002b000 0x1000>;
interrupts = <50>;
clocks = <&clks IMX27_CLK_FEC_IPG_GATE>,
<&clks IMX27_CLK_FEC_AHB_GATE>;

2
arch/arm/boot/dts/omap3-devkit8000.dts
View File

@ -110,6 +110,8 @@
nand@0,0 {
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
gpmc,device-width = <2>;
ti,nand-ecc-opt = "sw";
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;

4
arch/arm/boot/dts/zynq-7000.dtsi
View File

@ -193,7 +193,7 @@
};
gem0: ethernet@e000b000 {
compatible = "cdns,gem";
compatible = "cdns,zynq-gem";
reg = <0xe000b000 0x1000>;
status = "disabled";
interrupts = <0 22 4>;
@ -204,7 +204,7 @@
};
gem1: ethernet@e000c000 {
compatible = "cdns,gem";
compatible = "cdns,zynq-gem";
reg = <0xe000c000 0x1000>;
status = "disabled";
interrupts = <0 45 4>;

2
arch/arm/configs/multi_v7_defconfig
View File

@ -429,7 +429,7 @@ CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_HCD_STI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1760=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_STI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y

2
arch/arm/include/asm/barrier.h
View File

@ -81,7 +81,7 @@ do { \
#define read_barrier_depends() do { } while(0)
#define smp_read_barrier_depends() do { } while(0)
#define set_mb(var, value) do { var = value; smp_mb(); } while (0)
#define smp_store_mb(var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)
#define smp_mb__before_atomic() smp_mb()
#define smp_mb__after_atomic() smp_mb()

1
arch/arm/include/asm/io.h
View File

@ -336,6 +336,7 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
#define ioremap_nocache(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE)
#define ioremap_cache(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE_CACHED)
#define ioremap_wc(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE_WC)
#define ioremap_wt(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE)
#define iounmap __arm_iounmap
/*

4
arch/arm/kernel/entry-common.S
View File

@ -33,7 +33,9 @@ ret_fast_syscall:
UNWIND(.fnstart )
UNWIND(.cantunwind )
disable_irq @ disable interrupts
ldr r1, [tsk, #TI_FLAGS]
ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing
tst r1, #_TIF_SYSCALL_WORK
bne __sys_trace_return
tst r1, #_TIF_WORK_MASK
bne fast_work_pending
asm_trace_hardirqs_on

9
arch/arm/kernel/perf_event_cpu.c
View File

@ -304,16 +304,17 @@ static int probe_current_pmu(struct arm_pmu *pmu)
static int of_pmu_irq_cfg(struct platform_device *pdev)
{
int i, irq;
int *irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL);
if (!irqs)
return -ENOMEM;
int *irqs;
/* Don't bother with PPIs; they're already affine */
irq = platform_get_irq(pdev, 0);
if (irq >= 0 && irq_is_percpu(irq))
return 0;
irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL);
if (!irqs)
return -ENOMEM;
for (i = 0; i < pdev->num_resources; ++i) {
struct device_node *dn;
int cpu;

16
arch/arm/mach-imx/gpc.c
View File

@ -280,9 +280,15 @@ void __init imx_gpc_check_dt(void)
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
if (WARN_ON(!np ||
!of_find_property(np, "interrupt-controller", NULL)))
pr_warn("Outdated DT detected, system is about to crash!!!\n");
if (WARN_ON(!np))
return;
if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) {
pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
/* map GPC, so that at least CPUidle and WARs keep working */
gpc_base = of_iomap(np, 0);
}
}
#ifdef CONFIG_PM_GENERIC_DOMAINS
@ -443,6 +449,10 @@ static int imx_gpc_probe(struct platform_device *pdev)
struct regulator *pu_reg;
int ret;
/* bail out if DT too old and doesn't provide the necessary info */
if (!of_property_read_bool(pdev->dev.of_node, "#power-domain-cells"))
return 0;
pu_reg = devm_regulator_get_optional(&pdev->dev, "pu");
if (PTR_ERR(pu_reg) == -ENODEV)
pu_reg = NULL;

2
arch/arm/mach-pxa/pxa_cplds_irqs.c
View File

@ -107,7 +107,7 @@ static int cplds_probe(struct platform_device *pdev)
struct resource *res;
struct cplds *fpga;
int ret;
unsigned int base_irq = 0;
int base_irq;
unsigned long irqflags = 0;
fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL);

20
arch/arm/mm/mmu.c
View File

@ -1112,22 +1112,22 @@ void __init sanity_check_meminfo(void)
}
/*
* Find the first non-section-aligned page, and point
* Find the first non-pmd-aligned page, and point
* memblock_limit at it. This relies on rounding the
* limit down to be section-aligned, which happens at
* the end of this function.
* limit down to be pmd-aligned, which happens at the
* end of this function.
*
* With this algorithm, the start or end of almost any
* bank can be non-section-aligned. The only exception
* is that the start of the bank 0 must be section-
* bank can be non-pmd-aligned. The only exception is
* that the start of the bank 0 must be section-
* aligned, since otherwise memory would need to be
* allocated when mapping the start of bank 0, which
* occurs before any free memory is mapped.
*/
if (!memblock_limit) {
if (!IS_ALIGNED(block_start, SECTION_SIZE))
if (!IS_ALIGNED(block_start, PMD_SIZE))
memblock_limit = block_start;
else if (!IS_ALIGNED(block_end, SECTION_SIZE))
else if (!IS_ALIGNED(block_end, PMD_SIZE))
memblock_limit = arm_lowmem_limit;
}
@ -1137,12 +1137,12 @@ void __init sanity_check_meminfo(void)
high_memory = __va(arm_lowmem_limit - 1) + 1;
/*
* Round the memblock limit down to a section size. This
* Round the memblock limit down to a pmd size. This
* helps to ensure that we will allocate memory from the
* last full section, which should be mapped.
* last full pmd, which should be mapped.
*/
if (memblock_limit)
memblock_limit = round_down(memblock_limit, SECTION_SIZE);
memblock_limit = round_down(memblock_limit, PMD_SIZE);
if (!memblock_limit)
memblock_limit = arm_lowmem_limit;

1
arch/arm/xen/enlighten.c
View File

@ -272,6 +272,7 @@ void xen_arch_pre_suspend(void) { }
void xen_arch_post_suspend(int suspend_cancelled) { }
void xen_timer_resume(void) { }
void xen_arch_resume(void) { }
void xen_arch_suspend(void) { }
/* In the hypervisor.S file. */

2
arch/arm64/include/asm/barrier.h
View File

@ -114,7 +114,7 @@ do { \
#define read_barrier_depends() do { } while(0)
#define smp_read_barrier_depends() do { } while(0)
#define set_mb(var, value) do { var = value; smp_mb(); } while (0)
#define smp_store_mb(var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)
#define nop() asm volatile("nop");
#define smp_mb__before_atomic() smp_mb()

1
arch/arm64/include/asm/io.h
View File

@ -170,6 +170,7 @@ extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size);
#define ioremap(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
#define ioremap_nocache(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
#define ioremap_wc(addr, size) __ioremap((addr), (size), __pgprot(PROT_NORMAL_NC))
#define ioremap_wt(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
#define iounmap __iounmap
/*

2
arch/avr32/include/asm/cmpxchg.h
View File

@ -70,8 +70,6 @@ extern unsigned long __cmpxchg_u64_unsupported_on_32bit_kernels(
if something tries to do an invalid cmpxchg(). */
extern void __cmpxchg_called_with_bad_pointer(void);
#define __HAVE_ARCH_CMPXCHG 1
static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
unsigned long new, int size)
{

1
arch/avr32/include/asm/io.h
View File

@ -296,6 +296,7 @@ extern void __iounmap(void __iomem *addr);
__iounmap(addr)
#define ioremap_wc ioremap_nocache
#define ioremap_wt ioremap_nocache
#define cached(addr) P1SEGADDR(addr)
#define uncached(addr) P2SEGADDR(addr)

4
arch/frv/include/asm/io.h
View File

@ -17,6 +17,8 @@
#ifdef __KERNEL__
#define ARCH_HAS_IOREMAP_WT
#include <linux/types.h>
#include <asm/virtconvert.h>
#include <asm/string.h>
@ -265,7 +267,7 @@ static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned lon
return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
}
static inline void __iomem *ioremap_writethrough(unsigned long physaddr, unsigned long size)
static inline void __iomem *ioremap_wt(unsigned long physaddr, unsigned long size)
{
return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
}

1
arch/hexagon/include/asm/cmpxchg.h
View File

@ -64,7 +64,6 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
* looks just like atomic_cmpxchg on our arch currently with a bunch of
* variable casting.
*/
#define __HAVE_ARCH_CMPXCHG 1
#define cmpxchg(ptr, old, new) \
({ \

7
arch/ia64/include/asm/barrier.h
View File

@ -77,12 +77,7 @@ do { \
___p1; \
})
/*
* XXX check on this ---I suspect what Linus really wants here is
* acquire vs release semantics but we can't discuss this stuff with
* Linus just yet. Grrr...
*/
#define set_mb(var, value) do { (var) = (value); mb(); } while (0)
#define smp_store_mb(var, value) do { WRITE_ONCE(var, value); mb(); } while (0)
/*
* The group barrier in front of the rsm & ssm are necessary to ensure

2
arch/ia64/include/uapi/asm/cmpxchg.h
View File

@ -61,8 +61,6 @@ extern void ia64_xchg_called_with_bad_pointer(void);
* indicated by comparing RETURN with OLD.
*/
#define __HAVE_ARCH_CMPXCHG 1
/*
* This function doesn't exist, so you'll get a linker error
* if something tries to do an invalid cmpxchg().

13
arch/ia64/pci/pci.c
View File

@ -478,9 +478,16 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
{
struct pci_controller *controller = bridge->bus->sysdata;
ACPI_COMPANION_SET(&bridge->dev, controller->companion);
/*
* We pass NULL as parent to pci_create_root_bus(), so if it is not NULL
* here, pci_create_root_bus() has been called by someone else and
* sysdata is likely to be different from what we expect. Let it go in
* that case.
*/
if (!bridge->dev.parent) {
struct pci_controller *controller = bridge->bus->sysdata;
ACPI_COMPANION_SET(&bridge->dev, controller->companion);
}
return 0;
}

2
arch/m32r/include/asm/cmpxchg.h
View File

@ -107,8 +107,6 @@ __xchg_local(unsigned long x, volatile void *ptr, int size)
((__typeof__(*(ptr)))__xchg_local((unsigned long)(x), (ptr), \
sizeof(*(ptr))))
#define __HAVE_ARCH_CMPXCHG 1
static inline unsigned long
__cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new)
{

1
arch/m32r/include/asm/io.h
View File

@ -68,6 +68,7 @@ static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
extern void iounmap(volatile void __iomem *addr);
#define ioremap_nocache(off,size) ioremap(off,size)
#define ioremap_wc ioremap_nocache
#define ioremap_wt ioremap_nocache
/*
* IO bus memory addresses are also 1:1 with the physical address

1
arch/m68k/include/asm/cmpxchg.h
View File

@ -90,7 +90,6 @@ extern unsigned long __invalid_cmpxchg_size(volatile void *,
* indicated by comparing RETURN with OLD.
*/
#ifdef CONFIG_RMW_INSNS
#define __HAVE_ARCH_CMPXCHG 1
static inline unsigned long __cmpxchg(volatile void *p, unsigned long old,
unsigned long new, int size)

4
arch/m68k/include/asm/io_mm.h
View File

@ -20,6 +20,8 @@
#ifdef __KERNEL__
#define ARCH_HAS_IOREMAP_WT
#include <linux/compiler.h>
#include <asm/raw_io.h>
#include <asm/virtconvert.h>
@ -465,7 +467,7 @@ static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned lon
{
return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
}
static inline void __iomem *ioremap_writethrough(unsigned long physaddr,
static inline void __iomem *ioremap_wt(unsigned long physaddr,
unsigned long size)
{
return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);

4
arch/m68k/include/asm/io_no.h
View File

@ -3,6 +3,8 @@
#ifdef __KERNEL__
#define ARCH_HAS_IOREMAP_WT
#include <asm/virtconvert.h>
#include <asm-generic/iomap.h>
@ -153,7 +155,7 @@ static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
{
return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
}
static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
static inline void *ioremap_wt(unsigned long physaddr, unsigned long size)
{
return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
}

2
arch/metag/include/asm/barrier.h
View File

@ -84,7 +84,7 @@ static inline void fence(void)
#define read_barrier_depends() do { } while (0)
#define smp_read_barrier_depends() do { } while (0)
#define set_mb(var, value) do { var = value; smp_mb(); } while (0)
#define smp_store_mb(var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)
#define smp_store_release(p, v) \
do { \

2
arch/metag/include/asm/cmpxchg.h
View File

@ -51,8 +51,6 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
return old;
}
#define __HAVE_ARCH_CMPXCHG 1
#define cmpxchg(ptr, o, n) \
({ \
__typeof__(*(ptr)) _o_ = (o); \

3
arch/metag/include/asm/io.h
View File

@ -160,6 +160,9 @@ extern void __iounmap(void __iomem *addr);
#define ioremap_wc(offset, size) \
__ioremap((offset), (size), _PAGE_WR_COMBINE)
#define ioremap_wt(offset, size) \
__ioremap((offset), (size), 0)
#define iounmap(addr) \
__iounmap(addr)

2
arch/microblaze/include/asm/io.h
View File

@ -39,10 +39,10 @@ extern resource_size_t isa_mem_base;
extern void iounmap(void __iomem *addr);
extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
#define ioremap_writethrough(addr, size) ioremap((addr), (size))
#define ioremap_nocache(addr, size) ioremap((addr), (size))
#define ioremap_fullcache(addr, size) ioremap((addr), (size))
#define ioremap_wc(addr, size) ioremap((addr), (size))
#define ioremap_wt(addr, size) ioremap((addr), (size))
#endif /* CONFIG_MMU */

3
arch/mips/ath79/prom.c
View File

@ -1,6 +1,7 @@
/*
* Atheros AR71XX/AR724X/AR913X specific prom routines
*
* Copyright (C) 2015 Laurent Fasnacht <l@libres.ch>
* Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
@ -25,12 +26,14 @@ void __init prom_init(void)
{
fw_init_cmdline();
#ifdef CONFIG_BLK_DEV_INITRD
/* Read the initrd address from the firmware environment */
initrd_start = fw_getenvl("initrd_start");
if (initrd_start) {
initrd_start = KSEG0ADDR(initrd_start);
initrd_end = initrd_start + fw_getenvl("initrd_size");
}
#endif
}
void __init prom_free_prom_memory(void)

2
arch/mips/configs/fuloong2e_defconfig
View File

@ -194,7 +194,7 @@ CONFIG_USB_WUSB_CBAF=m
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_ISP1760=m
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_R8A66597_HCD=m

4
arch/mips/include/asm/barrier.h
View File

@ -112,8 +112,8 @@
#define __WEAK_LLSC_MB " \n"
#endif
#define set_mb(var, value) \
do { var = value; smp_mb(); } while (0)
#define smp_store_mb(var, value) \
do { WRITE_ONCE(var, value); smp_mb(); } while (0)
#define smp_llsc_mb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")

2
arch/mips/include/asm/cmpxchg.h
View File

@ -138,8 +138,6 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))); \
})
#define __HAVE_ARCH_CMPXCHG 1
#define __cmpxchg_asm(ld, st, m, old, new) \
({ \
__typeof(*(m)) __ret; \

2
arch/mips/kernel/irq.c
View File

@ -29,7 +29,7 @@
int kgdb_early_setup;
#endif
static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
static DECLARE_BITMAP(irq_map, NR_IRQS);
int allocate_irqno(void)
{

2
arch/mips/kernel/smp-bmips.c
View File

@ -444,7 +444,7 @@ struct plat_smp_ops bmips5000_smp_ops = {
static void bmips_wr_vec(unsigned long dst, char *start, char *end)
{
memcpy((void *)dst, start, end - start);
dma_cache_wback((unsigned long)start, end - start);
dma_cache_wback(dst, end - start);
local_flush_icache_range(dst, dst + (end - start));
instruction_hazard();
}

15
arch/mips/lib/strnlen_user.S
View File

@ -34,7 +34,12 @@ LEAF(__strnlen_\func\()_asm)
FEXPORT(__strnlen_\func\()_nocheck_asm)
move v0, a0
PTR_ADDU a1, a0 # stop pointer
1: beq v0, a1, 1f # limit reached?
1:
#ifdef CONFIG_CPU_DADDI_WORKAROUNDS
.set noat
li AT, 1
#endif
beq v0, a1, 1f # limit reached?
.ifeqs "\func", "kernel"
EX(lb, t0, (v0), .Lfault\@)
.else
@ -42,7 +47,13 @@ FEXPORT(__strnlen_\func\()_nocheck_asm)
.endif
.set noreorder
bnez t0, 1b
1: PTR_ADDIU v0, 1
1:
#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
PTR_ADDIU v0, 1
#else
PTR_ADDU v0, AT
.set at
#endif
.set reorder
PTR_SUBU v0, a0
jr ra

1
arch/mn10300/include/asm/io.h
View File

@ -282,6 +282,7 @@ static inline void __iomem *ioremap_nocache(unsigned long offset, unsigned long
}
#define ioremap_wc ioremap_nocache
#define ioremap_wt ioremap_nocache
static inline void iounmap(void __iomem *addr)
{

1
arch/nios2/include/asm/io.h
View File

@ -46,6 +46,7 @@ static inline void iounmap(void __iomem *addr)
}
#define ioremap_wc ioremap_nocache
#define ioremap_wt ioremap_nocache
/* Pages to physical address... */
#define page_to_phys(page) virt_to_phys(page_to_virt(page))

2
arch/parisc/include/asm/cmpxchg.h
View File

@ -46,8 +46,6 @@ __xchg(unsigned long x, __volatile__ void *ptr, int size)
#define xchg(ptr, x) \
((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
#define __HAVE_ARCH_CMPXCHG 1
/* bug catcher for when unsupported size is used - won't link */
extern void __cmpxchg_called_with_bad_pointer(void);

2
arch/powerpc/include/asm/barrier.h
View File

@ -34,7 +34,7 @@
#define rmb() __asm__ __volatile__ ("sync" : : : "memory")
#define wmb() __asm__ __volatile__ ("sync" : : : "memory")
#define set_mb(var, value) do { var = value; mb(); } while (0)
#define smp_store_mb(var, value) do { WRITE_ONCE(var, value); mb(); } while (0)
#ifdef __SUBARCH_HAS_LWSYNC
# define SMPWMB LWSYNC

1
arch/powerpc/include/asm/cmpxchg.h
View File

@ -144,7 +144,6 @@ __xchg_local(volatile void *ptr, unsigned long x, unsigned int size)
* Compare and exchange - if *p == old, set it to new,
* and return the old value of *p.
*/
#define __HAVE_ARCH_CMPXCHG 1
static __always_inline unsigned long
__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)

4
arch/powerpc/kernel/mce.c
View File

@ -73,7 +73,7 @@ void save_mce_event(struct pt_regs *regs, long handled,
uint64_t nip, uint64_t addr)
{
uint64_t srr1;
int index = __this_cpu_inc_return(mce_nest_count);
int index = __this_cpu_inc_return(mce_nest_count) - 1;
struct machine_check_event *mce = this_cpu_ptr(&mce_event[index]);
/*
@ -184,7 +184,7 @@ void machine_check_queue_event(void)
if (!get_mce_event(&evt, MCE_EVENT_RELEASE))
return;
index = __this_cpu_inc_return(mce_queue_count);
index = __this_cpu_inc_return(mce_queue_count) - 1;
/* If queue is full, just return for now. */
if (index >= MAX_MC_EVT) {
__this_cpu_dec(mce_queue_count);

1
arch/powerpc/kernel/vmlinux.lds.S
View File

@ -213,6 +213,7 @@ SECTIONS
*(.opd)
}
. = ALIGN(256);
.got : AT(ADDR(.got) - LOAD_OFFSET) {
__toc_start = .;
#ifndef CONFIG_RELOCATABLE

5
arch/powerpc/kvm/book3s_hv.c
View File

@ -1952,7 +1952,7 @@ static void post_guest_process(struct kvmppc_vcore *vc)
*/
static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
{
struct kvm_vcpu *vcpu;
struct kvm_vcpu *vcpu, *vnext;
int i;
int srcu_idx;
@ -1982,7 +1982,8 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
*/
if ((threads_per_core > 1) &&
((vc->num_threads > threads_per_subcore) || !on_primary_thread())) {
list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
list_for_each_entry_safe(vcpu, vnext, &vc->runnable_threads,
arch.run_list) {
vcpu->arch.ret = -EBUSY;
kvmppc_remove_runnable(vc, vcpu);
wake_up(&vcpu->arch.cpu_run);

25
arch/powerpc/mm/hugetlbpage.c
View File

@ -689,27 +689,34 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb,
struct page *
follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
{
pte_t *ptep;
struct page *page;
pte_t *ptep, pte;
unsigned shift;
unsigned long mask, flags;
struct page *page = ERR_PTR(-EINVAL);
local_irq_save(flags);
ptep = find_linux_pte_or_hugepte(mm->pgd, address, &shift);
if (!ptep)
goto no_page;
pte = READ_ONCE(*ptep);
/*
* Verify it is a huge page else bail.
* Transparent hugepages are handled by generic code. We can skip them
* here.
*/
local_irq_save(flags);
ptep = find_linux_pte_or_hugepte(mm->pgd, address, &shift);
if (!shift || pmd_trans_huge(__pmd(pte_val(pte))))
goto no_page;
/* Verify it is a huge page else bail. */
if (!ptep || !shift || pmd_trans_huge(*(pmd_t *)ptep)) {
local_irq_restore(flags);
return ERR_PTR(-EINVAL);
if (!pte_present(pte)) {
page = NULL;
goto no_page;
}
mask = (1UL << shift) - 1;
page = pte_page(*ptep);
page = pte_page(pte);
if (page)
page += (address & mask) / PAGE_SIZE;
no_page:
local_irq_restore(flags);
return page;
}

11
arch/powerpc/mm/pgtable_64.c
View File

@ -839,6 +839,17 @@ pmd_t pmdp_get_and_clear(struct mm_struct *mm,
* hash fault look at them.
*/
memset(pgtable, 0, PTE_FRAG_SIZE);
/*
* Serialize against find_linux_pte_or_hugepte which does lock-less
* lookup in page tables with local interrupts disabled. For huge pages
* it casts pmd_t to pte_t. Since format of pte_t is different from
* pmd_t we want to prevent transit from pmd pointing to page table
* to pmd pointing to huge page (and back) while interrupts are disabled.
* We clear pmd to possibly replace it with page table pointer in
* different code paths. So make sure we wait for the parallel
* find_linux_pte_or_hugepage to finish.
*/
kick_all_cpus_sync();
return old_pmd;
}

25
arch/s390/crypto/ghash_s390.c
View File

@ -16,11 +16,12 @@
#define GHASH_DIGEST_SIZE 16
struct ghash_ctx {
u8 icv[16];
u8 key[16];
u8 key[GHASH_BLOCK_SIZE];
};
struct ghash_desc_ctx {
u8 icv[GHASH_BLOCK_SIZE];
u8 key[GHASH_BLOCK_SIZE];
u8 buffer[GHASH_BLOCK_SIZE];
u32 bytes;
};
@ -28,8 +29,10 @@ struct ghash_desc_ctx {
static int ghash_init(struct shash_desc *desc)
{
struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
memset(dctx, 0, sizeof(*dctx));
memcpy(dctx->key, ctx->key, GHASH_BLOCK_SIZE);
return 0;
}
@ -45,7 +48,6 @@ static int ghash_setkey(struct crypto_shash *tfm,
}
memcpy(ctx->key, key, GHASH_BLOCK_SIZE);
memset(ctx->icv, 0, GHASH_BLOCK_SIZE);
return 0;
}
@ -54,7 +56,6 @@ static int ghash_update(struct shash_desc *desc,
const u8 *src, unsigned int srclen)
{
struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
unsigned int n;
u8 *buf = dctx->buffer;
int ret;
@ -70,7 +71,7 @@ static int ghash_update(struct shash_desc *desc,
src += n;
if (!dctx->bytes) {
ret = crypt_s390_kimd(KIMD_GHASH, ctx, buf,
ret = crypt_s390_kimd(KIMD_GHASH, dctx, buf,
GHASH_BLOCK_SIZE);
if (ret != GHASH_BLOCK_SIZE)
return -EIO;
@ -79,7 +80,7 @@ static int ghash_update(struct shash_desc *desc,
n = srclen & ~(GHASH_BLOCK_SIZE - 1);
if (n) {
ret = crypt_s390_kimd(KIMD_GHASH, ctx, src, n);
ret = crypt_s390_kimd(KIMD_GHASH, dctx, src, n);
if (ret != n)
return -EIO;
src += n;
@ -94,7 +95,7 @@ static int ghash_update(struct shash_desc *desc,
return 0;
}
static int ghash_flush(struct ghash_ctx *ctx, struct ghash_desc_ctx *dctx)
static int ghash_flush(struct ghash_desc_ctx *dctx)
{
u8 *buf = dctx->buffer;
int ret;
@ -104,24 +105,24 @@ static int ghash_flush(struct ghash_ctx *ctx, struct ghash_desc_ctx *dctx)
memset(pos, 0, dctx->bytes);
ret = crypt_s390_kimd(KIMD_GHASH, ctx, buf, GHASH_BLOCK_SIZE);
ret = crypt_s390_kimd(KIMD_GHASH, dctx, buf, GHASH_BLOCK_SIZE);
if (ret != GHASH_BLOCK_SIZE)
return -EIO;
dctx->bytes = 0;
}
dctx->bytes = 0;
return 0;
}
static int ghash_final(struct shash_desc *desc, u8 *dst)
{
struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
int ret;
ret = ghash_flush(ctx, dctx);
ret = ghash_flush(dctx);
if (!ret)
memcpy(dst, ctx->icv, GHASH_BLOCK_SIZE);
memcpy(dst, dctx->icv, GHASH_BLOCK_SIZE);
return ret;
}

2
arch/s390/crypto/prng.c
View File

@ -125,7 +125,7 @@ static int generate_entropy(u8 *ebuf, size_t nbytes)
/* fill page with urandom bytes */
get_random_bytes(pg, PAGE_SIZE);
/* exor page with stckf values */
for (n = 0; n < sizeof(PAGE_SIZE/sizeof(u64)); n++) {
for (n = 0; n < PAGE_SIZE / sizeof(u64); n++) {
u64 *p = ((u64 *)pg) + n;
*p ^= get_tod_clock_fast();
}

2
arch/s390/include/asm/barrier.h
View File

@ -36,7 +36,7 @@
#define smp_mb__before_atomic() smp_mb()
#define smp_mb__after_atomic() smp_mb()
#define set_mb(var, value) do { var = value; mb(); } while (0)
#define smp_store_mb(var, value) do { WRITE_ONCE(var, value); mb(); } while (0)
#define smp_store_release(p, v) \
do { \

2
arch/s390/include/asm/cmpxchg.h
View File

@ -32,8 +32,6 @@
__old; \
})
#define __HAVE_ARCH_CMPXCHG
#define __cmpxchg_double_op(p1, p2, o1, o2, n1, n2, insn) \
({ \
register __typeof__(*(p1)) __old1 asm("2") = (o1); \

1
arch/s390/include/asm/io.h
View File

@ -29,6 +29,7 @@ void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr);
#define ioremap_nocache(addr, size) ioremap(addr, size)
#define ioremap_wc ioremap_nocache
#define ioremap_wt ioremap_nocache
static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
{

2
arch/s390/include/asm/pgtable.h
View File

@ -494,7 +494,7 @@ static inline int pmd_large(pmd_t pmd)
return (pmd_val(pmd) & _SEGMENT_ENTRY_LARGE) != 0;
}
static inline int pmd_pfn(pmd_t pmd)
static inline unsigned long pmd_pfn(pmd_t pmd)
{
unsigned long origin_mask;

19
arch/s390/net/bpf_jit_comp.c
View File

@ -443,8 +443,11 @@ static void bpf_jit_epilogue(struct bpf_jit *jit)
/*
* Compile one eBPF instruction into s390x code
*
* NOTE: Use noinline because for gcov (-fprofile-arcs) gcc allocates a lot of
* stack space for the large switch statement.
*/
static int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i)
static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i)
{
struct bpf_insn *insn = &fp->insnsi[i];
int jmp_off, last, insn_count = 1;
@ -588,8 +591,8 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i)
EMIT4(0xb9160000, dst_reg, rc_reg);
break;
}
case BPF_ALU64 | BPF_DIV | BPF_X: /* dst = dst / (u32) src */
case BPF_ALU64 | BPF_MOD | BPF_X: /* dst = dst % (u32) src */
case BPF_ALU64 | BPF_DIV | BPF_X: /* dst = dst / src */
case BPF_ALU64 | BPF_MOD | BPF_X: /* dst = dst % src */
{
int rc_reg = BPF_OP(insn->code) == BPF_DIV ? REG_W1 : REG_W0;
@ -602,10 +605,8 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i)
EMIT4_IMM(0xa7090000, REG_W0, 0);
/* lgr %w1,%dst */
EMIT4(0xb9040000, REG_W1, dst_reg);
/* llgfr %dst,%src (u32 cast) */
EMIT4(0xb9160000, dst_reg, src_reg);
/* dlgr %w0,%dst */
EMIT4(0xb9870000, REG_W0, dst_reg);
EMIT4(0xb9870000, REG_W0, src_reg);
/* lgr %dst,%rc */
EMIT4(0xb9040000, dst_reg, rc_reg);
break;
@ -632,8 +633,8 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i)
EMIT4(0xb9160000, dst_reg, rc_reg);
break;
}
case BPF_ALU64 | BPF_DIV | BPF_K: /* dst = dst / (u32) imm */
case BPF_ALU64 | BPF_MOD | BPF_K: /* dst = dst % (u32) imm */
case BPF_ALU64 | BPF_DIV | BPF_K: /* dst = dst / imm */
case BPF_ALU64 | BPF_MOD | BPF_K: /* dst = dst % imm */
{
int rc_reg = BPF_OP(insn->code) == BPF_DIV ? REG_W1 : REG_W0;
@ -649,7 +650,7 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i)
EMIT4(0xb9040000, REG_W1, dst_reg);
/* dlg %w0,<d(imm)>(%l) */
EMIT6_DISP_LH(0xe3000000, 0x0087, REG_W0, REG_0, REG_L,
EMIT_CONST_U64((u32) imm));
EMIT_CONST_U64(imm));
/* lgr %dst,%rc */
EMIT4(0xb9040000, dst_reg, rc_reg);
break;

2
arch/score/include/asm/cmpxchg.h
View File

@ -42,8 +42,6 @@ static inline unsigned long __cmpxchg(volatile unsigned long *m,
(unsigned long)(o), \
(unsigned long)(n)))
#define __HAVE_ARCH_CMPXCHG 1
#include <asm-generic/cmpxchg-local.h>
#endif /* _ASM_SCORE_CMPXCHG_H */

2
arch/sh/include/asm/barrier.h
View File

@ -32,7 +32,7 @@
#define ctrl_barrier() __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
#endif
#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
#define smp_store_mb(var, value) do { (void)xchg(&var, value); } while (0)
#include <asm-generic/barrier.h>

2
arch/sh/include/asm/cmpxchg.h
View File

@ -46,8 +46,6 @@ extern void __xchg_called_with_bad_pointer(void);
* if something tries to do an invalid cmpxchg(). */
extern void __cmpxchg_called_with_bad_pointer(void);
#define __HAVE_ARCH_CMPXCHG 1
static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
unsigned long new, int size)
{

4
arch/sparc/include/asm/barrier_64.h
View File

@ -40,8 +40,8 @@ do { __asm__ __volatile__("ba,pt %%xcc, 1f\n\t" \
#define dma_rmb() rmb()
#define dma_wmb() wmb()
#define set_mb(__var, __value) \
do { __var = __value; membar_safe("#StoreLoad"); } while(0)
#define smp_store_mb(__var, __value) \
do { WRITE_ONCE(__var, __value); membar_safe("#StoreLoad"); } while(0)
#ifdef CONFIG_SMP
#define smp_mb() mb()

1
arch/sparc/include/asm/cmpxchg_32.h
View File

@ -34,7 +34,6 @@ static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int
*
* Cribbed from <asm-parisc/atomic.h>
*/
#define __HAVE_ARCH_CMPXCHG 1
/* bug catcher for when unsupported size is used - won't link */
void __cmpxchg_called_with_bad_pointer(void);

2
arch/sparc/include/asm/cmpxchg_64.h
View File

@ -65,8 +65,6 @@ static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr,
#include <asm-generic/cmpxchg-local.h>
#define __HAVE_ARCH_CMPXCHG 1
static inline unsigned long
__cmpxchg_u32(volatile int *m, int old, int new)
{

Some files were not shown because too many files have changed in this diff Show More