From e6244deed843bc001697f37e5beb1c0daf4f46a4 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 10 Feb 2016 15:02:45 -0800 Subject: [PATCH 1/3] i2c: omap: Fix PM regression with deferred probe for pm_runtime_reinit Commit 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe error and driver unbind") introduced pm_runtime_reinit() that is used to reinitialize PM runtime after -EPROBE_DEFER. This allows shutting down the device after a failed probe. However, for drivers using pm_runtime_use_autosuspend() this can cause a state where suspend callback is never called after -EPROBE_DEFER. On the following device driver probe, hardware state is different from the PM runtime state causing omap_device to produce the following error: omap_device_enable() called from invalid state 1 And with omap_device and omap hardware being picky for PM, this will block any deeper idle states in hardware. The solution is to fix the drivers to follow the PM runtime documentation: 1. For sections of code that needs the device disabled, use pm_runtime_put_sync_suspend() if pm_runtime_set_autosuspend() has been set. 2. For driver exit code, use pm_runtime_dont_use_autosuspend() before pm_runtime_put_sync() if pm_runtime_use_autosuspend() has been set. Fixes: 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe error and driver unbind") Signed-off-by: Tony Lindgren Acked-by: Ulf Hansson Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 08d26ba61ed3..13c45296ce5b 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1450,7 +1450,8 @@ omap_i2c_probe(struct platform_device *pdev) err_unuse_clocks: omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0); - pm_runtime_put(omap->dev); + pm_runtime_dont_use_autosuspend(omap->dev); + pm_runtime_put_sync(omap->dev); pm_runtime_disable(&pdev->dev); err_free_mem: @@ -1468,6 +1469,7 @@ static int omap_i2c_remove(struct platform_device *pdev) return ret; omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0); + pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); return 0; From bca71ba0343d28d953d74149d9161ab65a520dd6 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 26 Jan 2016 18:09:21 +0900 Subject: [PATCH 2/3] i2c: uniphier: fix typos in error messages Signed-off-by: Masahiro Yamada Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-uniphier-f.c | 2 +- drivers/i2c/busses/i2c-uniphier.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c index f3e5ff8522f0..213ba55e17c3 100644 --- a/drivers/i2c/busses/i2c-uniphier-f.c +++ b/drivers/i2c/busses/i2c-uniphier-f.c @@ -467,7 +467,7 @@ static int uniphier_fi2c_clk_init(struct device *dev, bus_speed = UNIPHIER_FI2C_DEFAULT_SPEED; if (!bus_speed) { - dev_err(dev, "clock-freqyency should not be zero\n"); + dev_err(dev, "clock-frequency should not be zero\n"); return -EINVAL; } diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c index 1f4f3f53819c..89eaa8a7e1e0 100644 --- a/drivers/i2c/busses/i2c-uniphier.c +++ b/drivers/i2c/busses/i2c-uniphier.c @@ -328,7 +328,7 @@ static int uniphier_i2c_clk_init(struct device *dev, bus_speed = UNIPHIER_I2C_DEFAULT_SPEED; if (!bus_speed) { - dev_err(dev, "clock-freqyency should not be zero\n"); + dev_err(dev, "clock-frequency should not be zero\n"); return -EINVAL; } From 1a1503c5396eb7f2edf4b8ef6067853014478c0c Mon Sep 17 00:00:00 2001 From: Alexandra Yates Date: Wed, 17 Feb 2016 18:21:21 -0800 Subject: [PATCH 3/3] i2c: i801: Adding Intel Lewisburg support for iTCO Starting from Intel Sunrisepoint (Skylake PCH) the iTCO watchdog resources have been moved to reside under the i801 SMBus host controller whereas previously they were under the LPC device. This patch adds Intel lewisburg SMBus support for iTCO device. It allows to load watchdog dynamically when the hardware is present. Fixes: cdc5a3110e7c ("i2c: i801: add Intel Lewisburg device IDs") Reviewed-by: Jean Delvare Signed-off-by: Alexandra Yates Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-i801.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index f62d69799a9c..27fa0cb09538 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1271,6 +1271,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) switch (dev->device) { case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS: case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS: + case PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS: + case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS: case PCI_DEVICE_ID_INTEL_DNV_SMBUS: priv->features |= FEATURE_I2C_BLOCK_READ; priv->features |= FEATURE_IRQ;