net: phy: aquantia: Add some additional phy interfaces

These are documented in the AQR115 register reference. I haven't tested
them, but perhaps they'll be useful to someone.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Sean Anderson 2022-09-20 18:12:34 -04:00 committed by David S. Miller
parent b7e9294885
commit 7de26bf144

View File

@ -27,9 +27,12 @@
#define MDIO_PHYXS_VEND_IF_STATUS 0xe812
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK GENMASK(7, 3)
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR 0
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX 1
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI 2
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII 3
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI 4
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII 6
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI 7
#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII 10
#define MDIO_AN_VEND_PROV 0xc400
@ -401,15 +404,24 @@ static int aqr107_read_status(struct phy_device *phydev)
case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:
phydev->interface = PHY_INTERFACE_MODE_10GKR;
break;
case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX:
phydev->interface = PHY_INTERFACE_MODE_1000BASEKX;
break;
case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
phydev->interface = PHY_INTERFACE_MODE_10GBASER;
break;
case MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII:
phydev->interface = PHY_INTERFACE_MODE_USXGMII;
break;
case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI:
phydev->interface = PHY_INTERFACE_MODE_XAUI;
break;
case MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII:
phydev->interface = PHY_INTERFACE_MODE_SGMII;
break;
case MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI:
phydev->interface = PHY_INTERFACE_MODE_RXAUI;
break;
case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII:
phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
break;
@ -522,11 +534,14 @@ static int aqr107_config_init(struct phy_device *phydev)
/* Check that the PHY interface type is compatible */
if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
phydev->interface != PHY_INTERFACE_MODE_1000BASEKX &&
phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
phydev->interface != PHY_INTERFACE_MODE_XGMII &&
phydev->interface != PHY_INTERFACE_MODE_USXGMII &&
phydev->interface != PHY_INTERFACE_MODE_10GKR &&
phydev->interface != PHY_INTERFACE_MODE_10GBASER)
phydev->interface != PHY_INTERFACE_MODE_10GBASER &&
phydev->interface != PHY_INTERFACE_MODE_XAUI &&
phydev->interface != PHY_INTERFACE_MODE_RXAUI)
return -ENODEV;
WARN(phydev->interface == PHY_INTERFACE_MODE_XGMII,