Merge 4.19-rc4 into staging-next

Handle the merge issues and take the iio and staging driver fixes. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-11 21:38:32 +08:00 · 2018-09-16 22:04:13 +02:00 · 2018-09-16 22:04:13 +02:00 · 7dc074348e
commit 7dc074348e
parent 6029b7ac29 7876320f88
827 changed files with 8259 additions and 5236 deletions
--- a/Documentation/ABI/stable/sysfs-bus-xen-backend
+++ b/Documentation/ABI/stable/sysfs-bus-xen-backend
@ -73,3 +73,12 @@ KernelVersion:	3.0
 Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 Description:
                Number of sectors written by the frontend.
+
+What:		/sys/bus/xen-backend/devices/*/state
+Date:		August 2018
+KernelVersion:	4.19
+Contact:	Joe Jin <joe.jin@oracle.com>
+Description:
+                The state of the device. One of: 'Unknown',
+                'Initialising', 'Initialised', 'Connected', 'Closing',
+                'Closed', 'Reconfiguring', 'Reconfigured'.
--- a/Documentation/ABI/stable/sysfs-devices-system-xen_memory
+++ b/Documentation/ABI/stable/sysfs-devices-system-xen_memory
@ -75,3 +75,12 @@ Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 Description:
 		Amount (in KiB) of low (or normal) memory in the
 		balloon.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/scrub_pages
+Date:		September 2018
+KernelVersion:	4.20
+Contact:	xen-devel@lists.xenproject.org
+Description:
+		Control scrubbing pages before returning them to Xen for others domains
+		use. Can be set with xen_scrub_pages cmdline
+		parameter. Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.
--- a/Documentation/ABI/testing/sysfs-driver-xen-blkback
+++ b/Documentation/ABI/testing/sysfs-driver-xen-blkback
@ -15,3 +15,13 @@ Description:
                blkback. If the frontend tries to use more than
                max_persistent_grants, the LRU kicks in and starts
                removing 5% of max_persistent_grants every 100ms.
+
+What:           /sys/module/xen_blkback/parameters/persistent_grant_unused_seconds
+Date:           August 2018
+KernelVersion:  4.19
+Contact:        Roger Pau Monné <roger.pau@citrix.com>
+Description:
+                How long a persistent grant is allowed to remain
+                allocated without being in use. The time is in
+                seconds, 0 means indefinitely long.
+                The default is 60 seconds.
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@ -3523,6 +3523,12 @@
 	ramdisk_size=	[RAM] Sizes of RAM disks in kilobytes
 			See Documentation/blockdev/ramdisk.txt.

+	random.trust_cpu={on,off}
+			[KNL] Enable or disable trusting the use of the
+			CPU's random number generator (if available) to
+			fully seed the kernel's CRNG. Default is controlled
+			by CONFIG_RANDOM_TRUST_CPU.
+
 	ras=option[,option,...]	[KNL] RAS-specific options

 		cec_disable	[X86]
@ -4994,6 +5000,12 @@
 			Disables the PV optimizations forcing the HVM guest to
 			run as generic HVM guest with no PV drivers.

+	xen_scrub_pages=	[XEN]
+			Boolean option to control scrubbing pages before giving them back
+			to Xen, for use by other domains. Can be also changed at runtime
+			with /sys/devices/system/xen_memory/xen_memory0/scrub_pages.
+			Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.
+
 	xirc2ps_cs=	[NET,PCMCIA]
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
--- a/Documentation/arm64/sve.txt
+++ b/Documentation/arm64/sve.txt
@ -200,7 +200,7 @@ prctl(PR_SVE_SET_VL, unsigned long arg)
      thread.

    * Changing the vector length causes all of P0..P15, FFR and all bits of
-      Z0..V31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
+      Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
      unspecified.  Calling PR_SVE_SET_VL with vl equal to the thread's current
      vector length, or calling PR_SVE_SET_VL with the PR_SVE_SET_VL_ONEXEC
      flag, does not constitute a change to the vector length for this purpose.
@ -500,7 +500,7 @@ References
 [2] arch/arm64/include/uapi/asm/ptrace.h
    AArch64 Linux ptrace ABI definitions

-[3] linux/Documentation/arm64/cpu-feature-registers.txt
+[3] Documentation/arm64/cpu-feature-registers.txt

 [4] ARM IHI0055C
    http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf
--- a/Documentation/device-mapper/dm-raid.txt
+++ b/Documentation/device-mapper/dm-raid.txt
@ -348,3 +348,7 @@ Version History
 1.13.1  Fix deadlock caused by early md_stop_writes().  Also fix size an
 	state races.
 1.13.2  Fix raid redundancy validation and avoid keeping raid set frozen
+1.14.0  Fix reshape race on small devices.  Fix stripe adding reshape
+	deadlock/potential data corruption.  Update superblock when
+	specific devices are requested via rebuild.  Fix RAID leg
+	rebuild errors.
--- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
@ -3,7 +3,6 @@
 Required properties:
 - compatible :
  - "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
-  - "fsl,imx8dv-lpi2c" for LPI2C compatible with the one integrated on i.MX8DV soc
 - reg : address and length of the lpi2c master registers
 - interrupts : lpi2c interrupt
 - clocks : lpi2c clock specifier
@ -11,7 +10,7 @@ Required properties:
 Examples:

 lpi2c7: lpi2c7@40a50000 {
-	compatible = "fsl,imx8dv-lpi2c";
+	compatible = "fsl,imx7ulp-lpi2c";
 	reg = <0x40A50000 0x10000>;
 	interrupt-parent = <&intc>;
 	interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
--- a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
@ -11,7 +11,7 @@ The RISC-V supervisor ISA manual specifies three interrupt sources that are
 attached to every HLIC: software interrupts, the timer interrupt, and external
 interrupts.  Software interrupts are used to send IPIs between cores.  The
 timer interrupt comes from an architecturally mandated real-time timer that is
-controller via Supervisor Binary Interface (SBI) calls and CSR reads.  External
+controlled via Supervisor Binary Interface (SBI) calls and CSR reads.  External
 interrupts connect all other device interrupts to the HLIC, which are routed
 via the platform-level interrupt controller (PLIC).

@ -25,7 +25,15 @@ in the system.

 Required properties:
 - compatible : "riscv,cpu-intc"
- #interrupt-cells : should be <1>
+- #interrupt-cells : should be <1>.  The interrupt sources are defined by the
+  RISC-V supervisor ISA manual, with only the following three interrupts being
+  defined for supervisor mode:
+    - Source 1 is the supervisor software interrupt, which can be sent by an SBI
+      call and is reserved for use by software.
+    - Source 5 is the supervisor timer interrupt, which can be configured by
+      SBI calls and implements a one-shot timer.
+    - Source 9 is the supervisor external interrupt, which chains to all other
+      device interrupts.
 - interrupt-controller : Identifies the node as an interrupt controller

 Furthermore, this interrupt-controller MUST be embedded inside the cpu
@ -38,7 +46,7 @@ An example device tree entry for a HLIC is show below.
 		...
 		cpu1-intc: interrupt-controller {
 			#interrupt-cells = <1>;
-			compatible = "riscv,cpu-intc", "sifive,fu540-c000-cpu-intc";
+			compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc";
 			interrupt-controller;
 		};
 	};
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@ -19,6 +19,10 @@ Required properties:
 - slaves		: Specifies number for slaves
 - active_slave		: Specifies the slave to use for time stamping,
 			  ethtool and SIOCGMIIPHY
+- cpsw-phy-sel		: Specifies the phandle to the CPSW phy mode selection
+			  device. See also cpsw-phy-sel.txt for it's binding.
+			  Note that in legacy cases cpsw-phy-sel may be
+			  a child device instead of a phandle.

 Optional properties:
 - ti,hwmods		: Must be "cpgmac0"
@ -75,6 +79,7 @@ Examples:
 		cpts_clock_mult = <0x80000000>;
 		cpts_clock_shift = <29>;
 		syscon = <&cm>;
+		cpsw-phy-sel = <&phy_sel>;
 		cpsw_emac0: slave@0 {
 			phy_id = <&davinci_mdio>, <0>;
 			phy-mode = "rgmii-txid";
@ -103,6 +108,7 @@ Examples:
 		cpts_clock_mult = <0x80000000>;
 		cpts_clock_shift = <29>;
 		syscon = <&cm>;
+		cpsw-phy-sel = <&phy_sel>;
 		cpsw_emac0: slave@0 {
 			phy_id = <&davinci_mdio>, <0>;
 			phy-mode = "rgmii-txid";
--- a/Documentation/devicetree/bindings/net/sh_eth.txt
+++ b/Documentation/devicetree/bindings/net/sh_eth.txt
@ -16,6 +16,7 @@ Required properties:
 	      "renesas,ether-r8a7794"  if the device is a part of R8A7794 SoC.
 	      "renesas,gether-r8a77980" if the device is a part of R8A77980 SoC.
 	      "renesas,ether-r7s72100" if the device is a part of R7S72100 SoC.
+	      "renesas,ether-r7s9210" if the device is a part of R7S9210 SoC.
 	      "renesas,rcar-gen1-ether" for a generic R-Car Gen1 device.
 	      "renesas,rcar-gen2-ether" for a generic R-Car Gen2 or RZ/G1
 	                                device.
--- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
@ -7,6 +7,7 @@ Required properties:
 	       Examples with soctypes are:
 		 - "renesas,r8a7743-wdt" (RZ/G1M)
 		 - "renesas,r8a7745-wdt" (RZ/G1E)
+		 - "renesas,r8a774a1-wdt" (RZ/G2M)
 	         - "renesas,r8a7790-wdt" (R-Car H2)
 	         - "renesas,r8a7791-wdt" (R-Car M2-W)
 	         - "renesas,r8a7792-wdt" (R-Car V2H)
@ -21,8 +22,8 @@ Required properties:
 	         - "renesas,r7s72100-wdt" (RZ/A1)
 		The generic compatible string must be:
 		 - "renesas,rza-wdt" for RZ/A
-		 - "renesas,rcar-gen2-wdt" for R-Car Gen2 and RZ/G
-		 - "renesas,rcar-gen3-wdt" for R-Car Gen3
+		 - "renesas,rcar-gen2-wdt" for R-Car Gen2 and RZ/G1
+		 - "renesas,rcar-gen3-wdt" for R-Car Gen3 and RZ/G2

 - reg : Should contain WDT registers location and length
 - clocks : the clock feeding the watchdog timer.
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@ -848,7 +848,7 @@ struct file_operations
 ----------------------

 This describes how the VFS can manipulate an open file. As of kernel
-4.1, the following members are defined:
+4.18, the following members are defined:

 struct file_operations {
 	struct module *owner;
@ -858,11 +858,11 @@ struct file_operations {
 	ssize_t (*read_iter) (struct kiocb *, struct iov_iter *);
 	ssize_t (*write_iter) (struct kiocb *, struct iov_iter *);
 	int (*iterate) (struct file *, struct dir_context *);
+	int (*iterate_shared) (struct file *, struct dir_context *);
 	__poll_t (*poll) (struct file *, struct poll_table_struct *);
 	long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
 	long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
 	int (*mmap) (struct file *, struct vm_area_struct *);
-	int (*mremap)(struct file *, struct vm_area_struct *);
 	int (*open) (struct inode *, struct file *);
 	int (*flush) (struct file *, fl_owner_t id);
 	int (*release) (struct inode *, struct file *);
@ -882,6 +882,10 @@ struct file_operations {
 #ifndef CONFIG_MMU
 	unsigned (*mmap_capabilities)(struct file *);
 #endif
+	ssize_t (*copy_file_range)(struct file *, loff_t, struct file *, loff_t, size_t, unsigned int);
+	int (*clone_file_range)(struct file *, loff_t, struct file *, loff_t, u64);
+	int (*dedupe_file_range)(struct file *, loff_t, struct file *, loff_t, u64);
+	int (*fadvise)(struct file *, loff_t, loff_t, int);
 };

 Again, all methods are called without any locks being held, unless
@ -899,6 +903,9 @@ otherwise noted.

  iterate: called when the VFS needs to read the directory contents

+  iterate_shared: called when the VFS needs to read the directory contents
+	when filesystem supports concurrent dir iterators
+
  poll: called by the VFS when a process wants to check if there is
 	activity on this file and (optionally) go to sleep until there
 	is activity. Called by the select(2) and poll(2) system calls
@ -951,6 +958,16 @@ otherwise noted.

  fallocate: called by the VFS to preallocate blocks or punch a hole.

+  copy_file_range: called by the copy_file_range(2) system call.
+
+  clone_file_range: called by the ioctl(2) system call for FICLONERANGE and
+	FICLONE commands.
+
+  dedupe_file_range: called by the ioctl(2) system call for FIDEDUPERANGE
+	command.
+
+  fadvise: possibly called by the fadvise64() system call.
+
 Note that the file operations are implemented by the specific
 filesystem in which the inode resides. When opening a device node
 (character or block special) most filesystems will call special
--- a/Documentation/hwmon/ina2xx
+++ b/Documentation/hwmon/ina2xx
@ -32,7 +32,7 @@ Supported chips:
    Datasheet: Publicly available at the Texas Instruments website
               http://www.ti.com/

-Author: Lothar Felten <l-felten@ti.com>
+Author: Lothar Felten <lothar.felten@gmail.com>

 Description
 -----------
--- a/Documentation/i2c/DMA-considerations
+++ b/Documentation/i2c/DMA-considerations
@ -50,10 +50,14 @@ bounce buffer. But you don't need to care about that detail, just use the
 returned buffer. If NULL is returned, the threshold was not met or a bounce
 buffer could not be allocated. Fall back to PIO in that case.

-In any case, a buffer obtained from above needs to be released. It ensures data
-is copied back to the message and a potentially used bounce buffer is freed::
+In any case, a buffer obtained from above needs to be released. Another helper
+function ensures a potentially used bounce buffer is freed::

-	i2c_release_dma_safe_msg_buf(msg, dma_buf);
+	i2c_put_dma_safe_msg_buf(dma_buf, msg, xferred);
+
+The last argument 'xferred' controls if the buffer is synced back to the
+message or not. No syncing is needed in cases setting up DMA had an error and
+there was no data transferred.

 The bounce buffer handling from the core is generic and simple. It will always
 allocate a new bounce buffer. If you want a more sophisticated handling (e.g.
--- a/Documentation/process/changes.rst
+++ b/Documentation/process/changes.rst
@ -86,7 +86,7 @@ pkg-config

 The build system, as of 4.18, requires pkg-config to check for installed
 kconfig tools and to determine flags settings for use in
-'make {menu,n,g,x}config'.  Previously pkg-config was being used but not
+'make {g,x}config'.  Previously pkg-config was being used but not
 verified or documented.

 Flex
--- a/Documentation/process/code-of-conduct.rst
+++ b/Documentation/process/code-of-conduct.rst
@ -0,0 +1,81 @@
+Contributor Covenant Code of Conduct
++++++++++++++++++++++++++++++++++++
+
+Our Pledge
+==========
+
+In the interest of fostering an open and welcoming environment, we as
+contributors and maintainers pledge to making participation in our project and
+our community a harassment-free experience for everyone, regardless of age, body
+size, disability, ethnicity, sex characteristics, gender identity and
+expression, level of experience, education, socio-economic status, nationality,
+personal appearance, race, religion, or sexual identity and orientation.
+
+Our Standards
+=============
+
+Examples of behavior that contributes to creating a positive environment
+include:
+
+* Using welcoming and inclusive language
+* Being respectful of differing viewpoints and experiences
+* Gracefully accepting constructive criticism
+* Focusing on what is best for the community
+* Showing empathy towards other community members
+
+
+Examples of unacceptable behavior by participants include:
+
+* The use of sexualized language or imagery and unwelcome sexual attention or
+  advances
+* Trolling, insulting/derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others’ private information, such as a physical or electronic
+  address, without explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+
+Our Responsibilities
+====================
+
+Maintainers are responsible for clarifying the standards of acceptable behavior
+and are expected to take appropriate and fair corrective action in response to
+any instances of unacceptable behavior.
+
+Maintainers have the right and responsibility to remove, edit, or reject
+comments, commits, code, wiki edits, issues, and other contributions that are
+not aligned to this Code of Conduct, or to ban temporarily or permanently any
+contributor for other behaviors that they deem inappropriate, threatening,
+offensive, or harmful.
+
+Scope
+=====
+
+This Code of Conduct applies both within project spaces and in public spaces
+when an individual is representing the project or its community. Examples of
+representing a project or community include using an official project e-mail
+address, posting via an official social media account, or acting as an appointed
+representative at an online or offline event. Representation of a project may be
+further defined and clarified by project maintainers.
+
+Enforcement
+===========
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported by contacting the Technical Advisory Board (TAB) at
+<tab@lists.linux-foundation.org>. All complaints will be reviewed and
+investigated and will result in a response that is deemed necessary and
+appropriate to the circumstances. The TAB is obligated to maintain
+confidentiality with regard to the reporter of an incident.  Further details of
+specific enforcement policies may be posted separately.
+
+Maintainers who do not follow or enforce the Code of Conduct in good faith may
+face temporary or permanent repercussions as determined by other members of the
+project’s leadership.
+
+Attribution
+===========
+
+This Code of Conduct is adapted from the Contributor Covenant, version 1.4,
+available at https://www.contributor-covenant.org/version/1/4/code-of-conduct.html
--- a/Documentation/process/code-of-conflict.rst
+++ b/Documentation/process/code-of-conflict.rst
@ -1,28 +0,0 @@
-Code of Conflict
----------------
-
-The Linux kernel development effort is a very personal process compared
-to "traditional" ways of developing software.  Your code and ideas
-behind it will be carefully reviewed, often resulting in critique and
-criticism.  The review will almost always require improvements to the
-code before it can be included in the kernel.  Know that this happens
-because everyone involved wants to see the best possible solution for
-the overall success of Linux.  This development process has been proven
-to create the most robust operating system kernel ever, and we do not
-want to do anything to cause the quality of submission and eventual
-result to ever decrease.
-
-If however, anyone feels personally abused, threatened, or otherwise
-uncomfortable due to this process, that is not acceptable.  If so,
-please contact the Linux Foundation's Technical Advisory Board at
-<tab@lists.linux-foundation.org>, or the individual members, and they
-will work to resolve the issue to the best of their ability.  For more
-information on who is on the Technical Advisory Board and what their
-role is, please see:
-
-	- http://www.linuxfoundation.org/projects/linux/tab
-
-As a reviewer of code, please strive to keep things civil and focused on
-the technical issues involved.  We are all humans, and frustrations can
-be high on both sides of the process.  Try to keep in mind the immortal
-words of Bill and Ted, "Be excellent to each other."
--- a/Documentation/process/index.rst
+++ b/Documentation/process/index.rst
@ -20,7 +20,7 @@ Below are the essential guides that every developer should read.
   :maxdepth: 1

   howto
-   code-of-conflict
+   code-of-conduct
   development-process
   submitting-patches
   coding-style
--- a/Documentation/scsi/scsi-parameters.txt
+++ b/Documentation/scsi/scsi-parameters.txt
@ -97,6 +97,11 @@ parameters may be changed at runtime by the command
 			allowing boot to proceed.  none ignores them, expecting
 			user space to do the scan.

+	scsi_mod.use_blk_mq=
+			[SCSI] use blk-mq I/O path by default
+			See SCSI_MQ_DEFAULT in drivers/scsi/Kconfig.
+			Format: <y/n>
+
 	sim710=		[SCSI,HW]
 			See header of drivers/scsi/sim710.c.

--- a/Documentation/x86/earlyprintk.txt
+++ b/Documentation/x86/earlyprintk.txt
@ -35,25 +35,25 @@ and two USB cables, connected like this:
 ( If your system does not list a debug port capability then you probably
  won't be able to use the USB debug key. )

- b.) You also need a Netchip USB debug cable/key:
+ b.) You also need a NetChip USB debug cable/key:

        http://www.plxtech.com/products/NET2000/NET20DC/default.asp

-     This is a small blue plastic connector with two USB connections,
+     This is a small blue plastic connector with two USB connections;
     it draws power from its USB connections.

 c.) You need a second client/console system with a high speed USB 2.0
     port.

- d.) The Netchip device must be plugged directly into the physical
+ d.) The NetChip device must be plugged directly into the physical
     debug port on the "host/target" system.  You cannot use a USB hub in
     between the physical debug port and the "host/target" system.

     The EHCI debug controller is bound to a specific physical USB
-     port and the Netchip device will only work as an early printk
+     port and the NetChip device will only work as an early printk
     device in this port.  The EHCI host controllers are electrically
     wired such that the EHCI debug controller is hooked up to the
-     first physical and there is no way to change this via software.
+     first physical port and there is no way to change this via software.
     You can find the physical port through experimentation by trying
     each physical port on the system and rebooting.  Or you can try
     and use lsusb or look at the kernel info messages emitted by the
@ -65,9 +65,9 @@ and two USB cables, connected like this:
     to the hardware vendor, because there is no reason not to wire
     this port into one of the physically accessible ports.

- e.) It is also important to note, that many versions of the Netchip
+ e.) It is also important to note, that many versions of the NetChip
     device require the "client/console" system to be plugged into the
-     right and side of the device (with the product logo facing up and
+     right hand side of the device (with the product logo facing up and
     readable left to right).  The reason being is that the 5 volt
     power supply is taken from only one side of the device and it
     must be the side that does not get rebooted.
@ -81,13 +81,18 @@ and two USB cables, connected like this:
      CONFIG_EARLY_PRINTK_DBGP=y

    And you need to add the boot command line: "earlyprintk=dbgp".
+
    (If you are using Grub, append it to the 'kernel' line in
-     /etc/grub.conf)
+     /etc/grub.conf.  If you are using Grub2 on a BIOS firmware system,
+     append it to the 'linux' line in /boot/grub2/grub.cfg. If you are
+     using Grub2 on an EFI firmware system, append it to the 'linux'
+     or 'linuxefi' line in /boot/grub2/grub.cfg or
+     /boot/efi/EFI/<distro>/grub.cfg.)

    On systems with more than one EHCI debug controller you must
    specify the correct EHCI debug controller number.  The ordering
    comes from the PCI bus enumeration of the EHCI controllers.  The
-    default with no number argument is "0" the first EHCI debug
+    default with no number argument is "0" or the first EHCI debug
    controller.  To use the second EHCI debug controller, you would
    use the command line: "earlyprintk=dbgp1"

@ -111,7 +116,7 @@ and two USB cables, connected like this:
    see the raw output.

 c.) On Nvidia Southbridge based systems: the kernel will try to probe
-     and find out which port has debug device connected.
+     and find out which port has a debug device connected.

 3. Testing that it works fine:

--- a/35
+++ b/35
@ -2320,6 +2320,7 @@ F:	drivers/clocksource/cadence_ttc_timer.c
 F:	drivers/i2c/busses/i2c-cadence.c
 F:	drivers/mmc/host/sdhci-of-arasan.c
 F:	drivers/edac/synopsys_edac.c
+F:	drivers/i2c/busses/i2c-xiic.c

 ARM64 PORT (AARCH64 ARCHITECTURE)
 M:	Catalin Marinas <catalin.marinas@arm.com>
@ -5633,6 +5634,8 @@ F:	lib/fault-inject.c

 FBTFT Framebuffer drivers
 S:	Orphan
+L:	dri-devel@lists.freedesktop.org
+L:	linux-fbdev@vger.kernel.org
 F:	drivers/staging/fbtft/

 FC0011 TUNER DRIVER
@ -6067,7 +6070,7 @@ F:	Documentation/gcc-plugins.txt

 GASKET DRIVER FRAMEWORK
 M:	Rob Springer <rspringer@google.com>
-M:	John Joseph <jnjoseph@google.com>
+M:	Todd Poynor <toddpoynor@google.com>
 M:	Ben Chan <benchan@chromium.org>
 S:	Maintained
 F:	drivers/staging/gasket/
@ -7023,6 +7026,20 @@ F:	drivers/crypto/vmx/aes*
 F:	drivers/crypto/vmx/ghash*
 F:	drivers/crypto/vmx/ppc-xlate.pl

+IBM Power PCI Hotplug Driver for RPA-compliant PPC64 platform
+M:	Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
+L:	linux-pci@vger.kernel.org
+L:	linuxppc-dev@lists.ozlabs.org
+S:	Supported
+F:	drivers/pci/hotplug/rpaphp*
+
+IBM Power IO DLPAR Driver for RPA-compliant PPC64 platform
+M:	Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
+L:	linux-pci@vger.kernel.org
+L:	linuxppc-dev@lists.ozlabs.org
+S:	Supported
+F:	drivers/pci/hotplug/rpadlpar*
+
 IBM ServeRAID RAID DRIVER
 S:	Orphan
 F:	drivers/scsi/ips.*
@ -8263,9 +8280,9 @@ F:	drivers/ata/pata_arasan_cf.c

 LIBATA PATA DRIVERS
 M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-M:	Jens Axboe <kernel.dk>
+M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 S:	Maintained
 F:	drivers/ata/pata_*.c
 F:	drivers/ata/ata_generic.c
@ -8283,7 +8300,7 @@ LIBATA SATA AHCI PLATFORM devices support
 M:	Hans de Goede <hdegoede@redhat.com>
 M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 S:	Maintained
 F:	drivers/ata/ahci_platform.c
 F:	drivers/ata/libahci_platform.c
@ -8299,7 +8316,7 @@ F:	drivers/ata/sata_promise.*
 LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)
 M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 S:	Maintained
 F:	drivers/ata/
 F:	include/linux/ata.h
@ -8307,7 +8324,7 @@ F:	include/linux/libata.h
 F:	Documentation/devicetree/bindings/ata/

 LIBLOCKDEP
-M:	Sasha Levin <alexander.levin@verizon.com>
+M:	Sasha Levin <alexander.levin@microsoft.com>
 S:	Maintained
 F:	tools/lib/lockdep/

@ -11176,7 +11193,7 @@ F:	drivers/pci/controller/dwc/pci-exynos.c

 PCI DRIVER FOR SYNOPSYS DESIGNWARE
 M:	Jingoo Han <jingoohan1@gmail.com>
-M:	Joao Pinto <Joao.Pinto@synopsys.com>
+M:	Gustavo Pimentel <gustavo.pimentel@synopsys.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/designware-pcie.txt
@ -11368,10 +11385,10 @@ S:	Maintained
 F:	drivers/platform/x86/peaq-wmi.c

 PER-CPU MEMORY ALLOCATOR
+M:	Dennis Zhou <dennis@kernel.org>
 M:	Tejun Heo <tj@kernel.org>
 M:	Christoph Lameter <cl@linux.com>
-M:	Dennis Zhou <dennisszhou@gmail.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu.git
 S:	Maintained
 F:	include/linux/percpu*.h
 F:	mm/percpu*.c
--- a/13
+++ b/13
@ -2,7 +2,7 @@
 VERSION = 4
 PATCHLEVEL = 19
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc4
 NAME = Merciless Moray

 # *DOCUMENTATION*
@ -616,6 +616,11 @@ CFLAGS_GCOV	:= -fprofile-arcs -ftest-coverage \
 	$(call cc-disable-warning,maybe-uninitialized,)
 export CFLAGS_GCOV

+# The arch Makefiles can override CC_FLAGS_FTRACE. We may also append it later.
+ifdef CONFIG_FUNCTION_TRACER
+  CC_FLAGS_FTRACE := -pg
+endif
+
 # The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default
 # values of the respective KBUILD_* variables
 ARCH_CPPFLAGS :=
@ -755,9 +760,6 @@ KBUILD_CFLAGS 	+= $(call cc-option, -femit-struct-debug-baseonly) \
 endif

 ifdef CONFIG_FUNCTION_TRACER
-ifndef CC_FLAGS_FTRACE
-CC_FLAGS_FTRACE := -pg
-endif
 ifdef CONFIG_FTRACE_MCOUNT_RECORD
  # gcc 5 supports generating the mcount tables directly
  ifeq ($(call cc-option-yn,-mrecord-mcount),y)
@ -807,6 +809,9 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 # disable pointer signed / unsigned warnings in gcc 4.0
 KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)

+# disable stringop warnings in gcc 8+
+KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
+
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)

--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@ -9,6 +9,7 @@
 config ARC
 	def_bool y
 	select ARC_TIMERS
+	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select ARCH_HAS_SG_CHAIN
@ -28,8 +29,12 @@ config ARC
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_FUTEX_CMPXCHG if FUTEX
+	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IOREMAP_PROT
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_LZMA
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_MEMBLOCK
@ -44,11 +49,6 @@ config ARC
 	select OF_EARLY_FLATTREE
 	select OF_RESERVED_MEM
 	select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING
-	select HAVE_DEBUG_STACKOVERFLOW
-	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_KERNEL_GZIP
-	select HAVE_KERNEL_LZMA
-	select ARCH_HAS_PTE_SPECIAL

 config ARCH_HAS_CACHE_LINE_SIZE
 	def_bool y
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@ -43,10 +43,7 @@ ifdef CONFIG_ARC_CURR_IN_REG
 LINUXINCLUDE	+=  -include ${src}/arch/arc/include/asm/current.h
 endif

-upto_gcc44    :=  $(call cc-ifversion, -le, 0404, y)
-atleast_gcc44 :=  $(call cc-ifversion, -ge, 0404, y)
-
-cflags-$(atleast_gcc44)			+= -fsection-anchors
+cflags-y				+= -fsection-anchors

 cflags-$(CONFIG_ARC_HAS_LLSC)		+= -mlock
 cflags-$(CONFIG_ARC_HAS_SWAPE)		+= -mswape
@ -82,11 +79,6 @@ cflags-$(disable_small_data)		+= -mno-sdata -fcall-used-gp
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mbig-endian
 ldflags-$(CONFIG_CPU_BIG_ENDIAN)	+= -EB

-# STAR 9000518362: (fixed with binutils shipping with gcc 4.8)
-# arc-linux-uclibc-ld (buildroot) or arceb-elf32-ld (EZChip) don't accept
-# --build-id w/o "-marclinux". Default arc-elf32-ld is OK
-ldflags-$(upto_gcc44)			+= -marclinux
-
 LIBGCC	:= $(shell $(CC) $(cflags-y) --print-libgcc-file-name)

 # Modules with short calls might break for calls into builtin-kernel
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@ -93,6 +93,32 @@
 		};
 	};

+	/*
+	 * Mark DMA peripherals connected via IOC port as dma-coherent. We do
+	 * it via overlay because peripherals defined in axs10x_mb.dtsi are
+	 * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
+	 * only AXS103 board has HW-coherent DMA peripherals)
+	 * We don't need to mark pgu@17000 as dma-coherent because it uses
+	 * external DMA buffer located outside of IOC aperture.
+	 */
+	axs10x_mb {
+		ethernet@0x18000 {
+			dma-coherent;
+		};
+
+		ehci@0x40000 {
+			dma-coherent;
+		};
+
+		ohci@0x60000 {
+			dma-coherent;
+		};
+
+		mmc@0x15000 {
+			dma-coherent;
+		};
+	};
+
 	/*
 	 * The DW APB ICTL intc on MB is connected to CPU intc via a
 	 * DT "invisible" DW APB GPIO block, configured to simply pass thru
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@ -100,6 +100,32 @@
 		};
 	};

+	/*
+	 * Mark DMA peripherals connected via IOC port as dma-coherent. We do
+	 * it via overlay because peripherals defined in axs10x_mb.dtsi are
+	 * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
+	 * only AXS103 board has HW-coherent DMA peripherals)
+	 * We don't need to mark pgu@17000 as dma-coherent because it uses
+	 * external DMA buffer located outside of IOC aperture.
+	 */
+	axs10x_mb {
+		ethernet@0x18000 {
+			dma-coherent;
+		};
+
+		ehci@0x40000 {
+			dma-coherent;
+		};
+
+		ohci@0x60000 {
+			dma-coherent;
+		};
+
+		mmc@0x15000 {
+			dma-coherent;
+		};
+	};
+
 	/*
 	 * This INTC is actually connected to DW APB GPIO
 	 * which acts as a wire between MB INTC and CPU INTC.
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@ -9,6 +9,10 @@
 */

 / {
+	aliases {
+		ethernet = &gmac;
+	};
+
 	axs10x_mb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@ -68,7 +72,7 @@
 			};
 		};

-		ethernet@0x18000 {
+		gmac: ethernet@0x18000 {
 			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
 			reg = < 0x18000 0x2000 >;
@ -81,6 +85,7 @@
 			max-speed = <100>;
 			resets = <&creg_rst 5>;
 			reset-names = "stmmaceth";
+			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
 		};

 		ehci@0x40000 {
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@ -25,6 +25,10 @@
 		bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
 	};

+	aliases {
+		ethernet = &gmac;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@ -163,7 +167,7 @@
 			#clock-cells = <0>;
 		};

-		ethernet@8000 {
+		gmac: ethernet@8000 {
 			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
 			reg = <0x8000 0x2000>;
@ -176,6 +180,8 @@
 			phy-handle = <&phy0>;
 			resets = <&cgu_rst HSDK_ETH_RESET>;
 			reset-names = "stmmaceth";
+			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
+			dma-coherent;

 			mdio {
 				#address-cells = <1>;
@ -194,12 +200,14 @@
 			compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
 			reg = <0x60000 0x100>;
 			interrupts = <15>;
+			dma-coherent;
 		};

 		ehci@40000 {
 			compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
 			reg = <0x40000 0x100>;
 			interrupts = <15>;
+			dma-coherent;
 		};

 		mmc@a000 {
@ -212,6 +220,7 @@
 			clock-names = "biu", "ciu";
 			interrupts = <12>;
 			bus-width = <4>;
+			dma-coherent;
 		};
 	};

--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@ -1,5 +1,3 @@
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@ -63,7 +61,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 CONFIG_MOUSE_SERIAL=y
 CONFIG_MOUSE_SYNAPTICS_USB=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@ -1,5 +1,3 @@
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@ -64,7 +62,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 CONFIG_MOUSE_SERIAL=y
 CONFIG_MOUSE_SYNAPTICS_USB=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@ -1,5 +1,3 @@
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@ -65,7 +63,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 CONFIG_MOUSE_SERIAL=y
 CONFIG_MOUSE_SYNAPTICS_USB=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
--- a/arch/arc/configs/haps_hs_defconfig
+++ b/arch/arc/configs/haps_hs_defconfig
@ -1,4 +1,3 @@
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@ -57,7 +56,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_ARC_PS2=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
--- a/arch/arc/configs/haps_hs_smp_defconfig
+++ b/arch/arc/configs/haps_hs_smp_defconfig
@ -1,4 +1,3 @@
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@ -60,7 +59,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_ARC_PS2=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
--- a/arch/arc/configs/hsdk_defconfig
+++ b/arch/arc/configs/hsdk_defconfig
@ -1,4 +1,3 @@
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 CONFIG_SYSVIPC=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NO_HZ_IDLE=y
--- a/arch/arc/configs/nps_defconfig
+++ b/arch/arc/configs/nps_defconfig
@ -59,7 +59,6 @@ CONFIG_NETCONSOLE=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
--- a/arch/arc/configs/nsim_700_defconfig
+++ b/arch/arc/configs/nsim_700_defconfig
@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@ -44,7 +43,6 @@ CONFIG_LXT_PHY=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
--- a/arch/arc/configs/nsim_hs_defconfig
+++ b/arch/arc/configs/nsim_hs_defconfig
@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@ -45,7 +44,6 @@ CONFIG_DEVTMPFS=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
--- a/arch/arc/configs/nsim_hs_smp_defconfig
+++ b/arch/arc/configs/nsim_hs_smp_defconfig
@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 # CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
@ -44,7 +43,6 @@ CONFIG_DEVTMPFS=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
--- a/arch/arc/configs/nsimosci_defconfig
+++ b/arch/arc/configs/nsimosci_defconfig
@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@ -48,7 +47,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_ARC_PS2=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
--- a/arch/arc/configs/nsimosci_hs_defconfig
+++ b/arch/arc/configs/nsimosci_hs_defconfig
@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@ -47,7 +46,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_ARC_PS2=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
--- a/arch/arc/configs/nsimosci_hs_smp_defconfig
+++ b/arch/arc/configs/nsimosci_hs_smp_defconfig
@ -1,4 +1,3 @@
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@ -58,7 +57,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_ARC_PS2=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
--- a/arch/arc/configs/tb10x_defconfig
+++ b/arch/arc/configs/tb10x_defconfig
@ -57,7 +57,6 @@ CONFIG_STMMAC_ETH=y
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
--- a/arch/arc/configs/vdk_hs38_defconfig
+++ b/arch/arc/configs/vdk_hs38_defconfig
@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
@ -53,7 +52,6 @@ CONFIG_NATIONAL_PHY=y
 CONFIG_MOUSE_PS2_TOUCHKIT=y
 CONFIG_SERIO_ARC_PS2=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
--- a/arch/arc/include/asm/atomic.h
+++ b/arch/arc/include/asm/atomic.h
@ -84,7 +84,7 @@ static inline int atomic_fetch_##op(int i, atomic_t *v)			\
 	"1:	llock   %[orig], [%[ctr]]		\n"		\
 	"	" #asm_op " %[val], %[orig], %[i]	\n"		\
 	"	scond   %[val], [%[ctr]]		\n"		\
-	"						\n"		\
+	"	bnz     1b				\n"		\
 	: [val]	"=&r"	(val),						\
 	  [orig] "=&r" (orig)						\
 	: [ctr]	"r"	(&v->counter),					\
--- a/arch/arc/include/asm/dma-mapping.h
+++ b/arch/arc/include/asm/dma-mapping.h
@ -0,0 +1,13 @@
+// SPDX-License-Identifier:  GPL-2.0
+// (C) 2018 Synopsys, Inc. (www.synopsys.com)
+
+#ifndef ASM_ARC_DMA_MAPPING_H
+#define ASM_ARC_DMA_MAPPING_H
+
+#include <asm-generic/dma-mapping.h>
+
+void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+			const struct iommu_ops *iommu, bool coherent);
+#define arch_setup_dma_ops arch_setup_dma_ops
+
+#endif
--- a/arch/arc/kernel/troubleshoot.c
+++ b/arch/arc/kernel/troubleshoot.c
@ -83,9 +83,6 @@ done:
 static void show_faulting_vma(unsigned long address, char *buf)
 {
 	struct vm_area_struct *vma;
-	struct inode *inode;
-	unsigned long ino = 0;
-	dev_t dev = 0;
 	char *nm = buf;
 	struct mm_struct *active_mm = current->active_mm;

@ -99,12 +96,10 @@ static void show_faulting_vma(unsigned long address, char *buf)
 	 * if the container VMA is not found
 	 */
 	if (vma && (vma->vm_start <= address)) {
-		struct file *file = vma->vm_file;
-		if (file) {
-			nm = file_path(file, buf, PAGE_SIZE - 1);
-			inode = file_inode(vma->vm_file);
-			dev = inode->i_sb->s_dev;
-			ino = inode->i_ino;
+		if (vma->vm_file) {
+			nm = file_path(vma->vm_file, buf, PAGE_SIZE - 1);
+			if (IS_ERR(nm))
+				nm = "?";
 		}
 		pr_info("    @off 0x%lx in [%s]\n"
 			"    VMA: 0x%08lx to 0x%08lx\n",
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@ -65,7 +65,7 @@ char *arc_cache_mumbojumbo(int c, char *buf, int len)

 	n += scnprintf(buf + n, len - n, "Peripherals\t: %#lx%s%s\n",
 		       perip_base,
-		       IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency "));
+		       IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency (per-device) "));

 	return buf;
 }
@ -896,15 +896,6 @@ static void __dma_cache_wback_slc(phys_addr_t start, unsigned long sz)
 	slc_op(start, sz, OP_FLUSH);
 }

-/*
- * DMA ops for systems with IOC
- * IOC hardware snoops all DMA traffic keeping the caches consistent with
- * memory - eliding need for any explicit cache maintenance of DMA buffers
- */
-static void __dma_cache_wback_inv_ioc(phys_addr_t start, unsigned long sz) {}
-static void __dma_cache_inv_ioc(phys_addr_t start, unsigned long sz) {}
-static void __dma_cache_wback_ioc(phys_addr_t start, unsigned long sz) {}
-
 /*
 * Exported DMA API
 */
@ -1153,6 +1144,19 @@ noinline void __init arc_ioc_setup(void)
 {
 	unsigned int ioc_base, mem_sz;

+	/*
+	 * As for today we don't support both IOC and ZONE_HIGHMEM enabled
+	 * simultaneously. This happens because as of today IOC aperture covers
+	 * only ZONE_NORMAL (low mem) and any dma transactions outside this
+	 * region won't be HW coherent.
+	 * If we want to use both IOC and ZONE_HIGHMEM we can use
+	 * bounce_buffer to handle dma transactions to HIGHMEM.
+	 * Also it is possible to modify dma_direct cache ops or increase IOC
+	 * aperture size if we are planning to use HIGHMEM without PAE.
+	 */
+	if (IS_ENABLED(CONFIG_HIGHMEM))
+		panic("IOC and HIGHMEM can't be used simultaneously");
+
 	/* Flush + invalidate + disable L1 dcache */
 	__dc_disable();

@ -1264,11 +1268,7 @@ void __init arc_cache_init_master(void)
 	if (is_isa_arcv2() && ioc_enable)
 		arc_ioc_setup();

-	if (is_isa_arcv2() && ioc_enable) {
-		__dma_cache_wback_inv = __dma_cache_wback_inv_ioc;
-		__dma_cache_inv = __dma_cache_inv_ioc;
-		__dma_cache_wback = __dma_cache_wback_ioc;
-	} else if (is_isa_arcv2() && l2_line_sz && slc_enable) {
+	if (is_isa_arcv2() && l2_line_sz && slc_enable) {
 		__dma_cache_wback_inv = __dma_cache_wback_inv_slc;
 		__dma_cache_inv = __dma_cache_inv_slc;
 		__dma_cache_wback = __dma_cache_wback_slc;
@ -1277,6 +1277,12 @@ void __init arc_cache_init_master(void)
 		__dma_cache_inv = __dma_cache_inv_l1;
 		__dma_cache_wback = __dma_cache_wback_l1;
 	}
+	/*
+	 * In case of IOC (say IOC+SLC case), pointers above could still be set
+	 * but end up not being relevant as the first function in chain is not
+	 * called at all for @dma_direct_ops
+	 *     arch_sync_dma_for_cpu() -> dma_cache_*() -> __dma_cache_*()
+	 */
 }

 void __ref arc_cache_init(void)
--- a/arch/arc/mm/dma.c
+++ b/arch/arc/mm/dma.c
@ -6,20 +6,17 @@
 * published by the Free Software Foundation.
 */

-/*
- * DMA Coherent API Notes
- *
- * I/O is inherently non-coherent on ARC. So a coherent DMA buffer is
- * implemented by accessing it using a kernel virtual address, with
- * Cache bit off in the TLB entry.
- *
- * The default DMA address == Phy address which is 0x8000_0000 based.
- */
-
 #include <linux/dma-noncoherent.h>
 #include <asm/cache.h>
 #include <asm/cacheflush.h>

+/*
+ * ARCH specific callbacks for generic noncoherent DMA ops (dma/noncoherent.c)
+ *  - hardware IOC not available (or "dma-coherent" not set for device in DT)
+ *  - But still handle both coherent and non-coherent requests from caller
+ *
+ * For DMA coherent hardware (IOC) generic code suffices
+ */
 void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		gfp_t gfp, unsigned long attrs)
 {
@ -27,42 +24,29 @@ void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	struct page *page;
 	phys_addr_t paddr;
 	void *kvaddr;
-	int need_coh = 1, need_kvaddr = 0;
+	bool need_coh = !(attrs & DMA_ATTR_NON_CONSISTENT);
+
+	/*
+	 * __GFP_HIGHMEM flag is cleared by upper layer functions
+	 * (in include/linux/dma-mapping.h) so we should never get a
+	 * __GFP_HIGHMEM here.
+	 */
+	BUG_ON(gfp & __GFP_HIGHMEM);

 	page = alloc_pages(gfp, order);
 	if (!page)
 		return NULL;

-	/*
-	 * IOC relies on all data (even coherent DMA data) being in cache
-	 * Thus allocate normal cached memory
-	 *
-	 * The gains with IOC are two pronged:
-	 *   -For streaming data, elides need for cache maintenance, saving
-	 *    cycles in flush code, and bus bandwidth as all the lines of a
-	 *    buffer need to be flushed out to memory
-	 *   -For coherent data, Read/Write to buffers terminate early in cache
-	 *   (vs. always going to memory - thus are faster)
-	 */
-	if ((is_isa_arcv2() && ioc_enable) ||
-	    (attrs & DMA_ATTR_NON_CONSISTENT))
-		need_coh = 0;
-
-	/*
-	 * - A coherent buffer needs MMU mapping to enforce non-cachability
-	 * - A highmem page needs a virtual handle (hence MMU mapping)
-	 *   independent of cachability
-	 */
-	if (PageHighMem(page) || need_coh)
-		need_kvaddr = 1;
-
 	/* This is linear addr (0x8000_0000 based) */
 	paddr = page_to_phys(page);

 	*dma_handle = paddr;

-	/* This is kernel Virtual address (0x7000_0000 based) */
-	if (need_kvaddr) {
+	/*
+	 * A coherent buffer needs MMU mapping to enforce non-cachability.
+	 * kvaddr is kernel Virtual address (0x7000_0000 based).
+	 */
+	if (need_coh) {
 		kvaddr = ioremap_nocache(paddr, size);
 		if (kvaddr == NULL) {
 			__free_pages(page, order);
@ -93,12 +77,8 @@ void arch_dma_free(struct device *dev, size_t size, void *vaddr,
 {
 	phys_addr_t paddr = dma_handle;
 	struct page *page = virt_to_page(paddr);
-	int is_non_coh = 1;

-	is_non_coh = (attrs & DMA_ATTR_NON_CONSISTENT) ||
-			(is_isa_arcv2() && ioc_enable);
-
-	if (PageHighMem(page) || !is_non_coh)
+	if (!(attrs & DMA_ATTR_NON_CONSISTENT))
 		iounmap((void __force __iomem *)vaddr);

 	__free_pages(page, get_order(size));
@ -185,3 +165,23 @@ void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
 		break;
 	}
 }
+
+/*
+ * Plug in coherent or noncoherent dma ops
+ */
+void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+			const struct iommu_ops *iommu, bool coherent)
+{
+	/*
+	 * IOC hardware snoops all DMA traffic keeping the caches consistent
+	 * with memory - eliding need for any explicit cache maintenance of
+	 * DMA buffers - so we can use dma_direct cache ops.
+	 */
+	if (is_isa_arcv2() && ioc_enable && coherent) {
+		set_dma_ops(dev, &dma_direct_ops);
+		dev_info(dev, "use dma_direct_ops cache ops\n");
+	} else {
+		set_dma_ops(dev, &dma_noncoherent_ops);
+		dev_info(dev, "use dma_noncoherent_ops cache ops\n");
+	}
+}
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@ -469,6 +469,7 @@
 			ti,hwmods = "rtc";
 			clocks = <&clk_32768_ck>;
 			clock-names = "int-clk";
+			system-power-controller;
 			status = "disabled";
 		};

--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@ -13,6 +13,43 @@
 		reg = <0x40000000 0x08000000>;
 	};

+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 0>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 18 0>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
 	apb@80000000 {
 		apbh@80000000 {
 			gpmi-nand@8000c000 {
@ -52,31 +89,11 @@
 			lcdif@80030000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&lcdif_24bit_pins_a>;
-				lcd-supply = <&reg_lcd_3v3>;
-				display = <&display0>;
 				status = "okay";

-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9200000>;
-							hactive = <480>;
-							vactive = <272>;
-							hback-porch = <15>;
-							hfront-porch = <8>;
-							vback-porch = <12>;
-							vfront-porch = <4>;
-							hsync-len = <1>;
-							vsync-len = <1>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
+				port {
+					display_out: endpoint {
+						remote-endpoint = <&panel_in>;
 					};
 				};
 			};
@ -118,32 +135,7 @@
 		};
 	};

-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_vddio_sd0: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 29 0>;
-		};
-
-		reg_lcd_3v3: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 18 0>;
-			enable-active-high;
-		};
-	};
-
-	backlight {
+	backlight_display: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 2 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@ -13,6 +13,87 @@
 		reg = <0x40000000 0x08000000>;
 	};

+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 28 0>;
+	};
+
+	reg_fec_3v3: regulator-fec-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 15 0>;
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 9 0>;
+		enable-active-high;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 8 0>;
+		enable-active-high;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 30 0>;
+		enable-active-high;
+	};
+
+	reg_can_3v3: regulator-can-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 13 0>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
 	apb@80000000 {
 		apbh@80000000 {
 			gpmi-nand@8000c000 {
@ -116,31 +197,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&lcdif_24bit_pins_a
 					     &lcdif_pins_evk>;
-				lcd-supply = <&reg_lcd_3v3>;
-				display = <&display0>;
 				status = "okay";

-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33500000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <89>;
-							hfront-porch = <164>;
-							vback-porch = <23>;
-							vfront-porch = <10>;
-							hsync-len = <10>;
-							vsync-len = <10>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
+				port {
+					display_out: endpoint {
+						remote-endpoint = <&panel_in>;
 					};
 				};
 			};
@ -269,80 +330,6 @@
 		};
 	};

-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 28 0>;
-		};
-
-		reg_fec_3v3: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "fec-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 15 0>;
-		};
-
-		reg_usb0_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 9 0>;
-			enable-active-high;
-		};
-
-		reg_usb1_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 8 0>;
-			enable-active-high;
-		};
-
-		reg_lcd_3v3: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 30 0>;
-			enable-active-high;
-		};
-
-		reg_can_3v3: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "can-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 13 0>;
-			enable-active-high;
-		};
-
-	};
-
 	sound {
 		compatible = "fsl,imx28-evk-sgtl5000",
 			     "fsl,mxs-audio-sgtl5000";
@ -363,7 +350,7 @@
 		};
 	};

-	backlight {
+	backlight_display: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 2 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@ -126,10 +126,14 @@
 		interrupt-names = "msi";
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		/*
+		 * Reference manual lists pci irqs incorrectly
+		 * Real hardware ordering is same as imx6: D+MSI, C, B, A
+		 */
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
 			 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
 			 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@ -354,7 +354,7 @@
 &mmc2 {
 	vmmc-supply = <&vsdio>;
 	bus-width = <8>;
-	non-removable;
+	ti,non-removable;
 };

 &mmc3 {
@ -621,15 +621,6 @@
 		OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_fsx */
 		>;
 	};
-};
-
-&omap4_pmx_wkup {
-	usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
-		/* gpio_wk0 */
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
-		>;
-	};

 	vibrator_direction_pin: pinmux_vibrator_direction_pin {
 		pinctrl-single,pins = <
@ -644,6 +635,15 @@
 	};
 };

+&omap4_pmx_wkup {
+	usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
+		/* gpio_wk0 */
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+};
+
 /*
 * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
 * uart1 wakeirq.
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@ -257,6 +257,7 @@ CONFIG_IMX_IPUV3_CORE=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
 CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
 CONFIG_DRM_DW_HDMI_CEC=y
 CONFIG_DRM_IMX=y
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@ -95,6 +95,7 @@ CONFIG_MFD_MXS_LRADC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_DRM=y
+CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
 CONFIG_DRM_MXSFB=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@ -5,19 +5,19 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_VERSATILE=y
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_CMA=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
 CONFIG_FPE_NWFPE=y
 CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@ -59,6 +59,7 @@ CONFIG_GPIO_PL061=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_ARM_VERSATILE=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_DUMB_VGA_DAC=y
 CONFIG_DRM_PL111=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
@ -89,9 +90,10 @@ CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=m
+CONFIG_FONTS=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_FONTS=y
-CONFIG_FONT_ACORN_8x8=y
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@ -223,7 +223,6 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
 			      struct kvm_vcpu_events *events);

 #define KVM_ARCH_WANT_MMU_NOTIFIER
-int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
 int kvm_unmap_hva_range(struct kvm *kvm,
 			unsigned long start, unsigned long end);
 void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@ -2160,6 +2160,37 @@ static int of_dev_hwmod_lookup(struct device_node *np,
 	return -ENODEV;
 }

+/**
+ * omap_hwmod_fix_mpu_rt_idx - fix up mpu_rt_idx register offsets
+ *
+ * @oh: struct omap_hwmod *
+ * @np: struct device_node *
+ *
+ * Fix up module register offsets for modules with mpu_rt_idx.
+ * Only needed for cpsw with interconnect target module defined
+ * in device tree while still using legacy hwmod platform data
+ * for rev, sysc and syss registers.
+ *
+ * Can be removed when all cpsw hwmod platform data has been
+ * dropped.
+ */
+static void omap_hwmod_fix_mpu_rt_idx(struct omap_hwmod *oh,
+				      struct device_node *np,
+				      struct resource *res)
+{
+	struct device_node *child = NULL;
+	int error;
+
+	child = of_get_next_child(np, child);
+	if (!child)
+		return;
+
+	error = of_address_to_resource(child, oh->mpu_rt_idx, res);
+	if (error)
+		pr_err("%s: error mapping mpu_rt_idx: %i\n",
+		       __func__, error);
+}
+
 /**
 * omap_hwmod_parse_module_range - map module IO range from device tree
 * @oh: struct omap_hwmod *
@ -2220,7 +2251,13 @@ int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
 	size = be32_to_cpup(ranges);

 	pr_debug("omap_hwmod: %s %s at 0x%llx size 0x%llx\n",
-		 oh->name, np->name, base, size);
+		 oh ? oh->name : "", np->name, base, size);
+
+	if (oh && oh->mpu_rt_idx) {
+		omap_hwmod_fix_mpu_rt_idx(oh, np, res);
+
+		return 0;
+	}

 	res->start = base;
 	res->end = base + size - 1;
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@ -763,7 +763,6 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK

 config HOLES_IN_ZONE
 	def_bool y
-	depends on NUMA

 source kernel/Kconfig.hz

--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@ -46,6 +46,7 @@
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
 	status = "okay";
 };

@ -56,6 +57,7 @@
 	vqmmc-supply = <&reg_bldo2>;
 	non-removable;
 	cap-mmc-hw-reset;
+	bus-width = <8>;
 	status = "okay";
 };

--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@ -38,6 +38,7 @@ CONFIG_ARCH_BCM_IPROC=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_ARCH_BRCMSTB=y
 CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_K3=y
 CONFIG_ARCH_LAYERSCAPE=y
 CONFIG_ARCH_LG1K=y
 CONFIG_ARCH_HISI=y
@ -605,6 +606,8 @@ CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
 CONFIG_ARCH_TEGRA_186_SOC=y
 CONFIG_ARCH_TEGRA_194_SOC=y
+CONFIG_ARCH_K3_AM6_SOC=y
+CONFIG_SOC_TI=y
 CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
 CONFIG_EXTCON_USB_GPIO=y
 CONFIG_EXTCON_USBC_CROS_EC=y
--- a/arch/arm64/crypto/ghash-ce-glue.c
+++ b/arch/arm64/crypto/ghash-ce-glue.c
@ -417,7 +417,7 @@ static int gcm_encrypt(struct aead_request *req)
 		__aes_arm64_encrypt(ctx->aes_key.key_enc, tag, iv, nrounds);
 		put_unaligned_be32(2, iv + GCM_IV_SIZE);

-		while (walk.nbytes >= AES_BLOCK_SIZE) {
+		while (walk.nbytes >= (2 * AES_BLOCK_SIZE)) {
 			int blocks = walk.nbytes / AES_BLOCK_SIZE;
 			u8 *dst = walk.dst.virt.addr;
 			u8 *src = walk.src.virt.addr;
@ -437,11 +437,18 @@ static int gcm_encrypt(struct aead_request *req)
 					NULL);

 			err = skcipher_walk_done(&walk,
-						 walk.nbytes % AES_BLOCK_SIZE);
+						 walk.nbytes % (2 * AES_BLOCK_SIZE));
 		}
-		if (walk.nbytes)
+		if (walk.nbytes) {
 			__aes_arm64_encrypt(ctx->aes_key.key_enc, ks, iv,
 					    nrounds);
+			if (walk.nbytes > AES_BLOCK_SIZE) {
+				crypto_inc(iv, AES_BLOCK_SIZE);
+				__aes_arm64_encrypt(ctx->aes_key.key_enc,
+					            ks + AES_BLOCK_SIZE, iv,
+						    nrounds);
+			}
+		}
 	}

 	/* handle the tail */
@ -545,7 +552,7 @@ static int gcm_decrypt(struct aead_request *req)
 		__aes_arm64_encrypt(ctx->aes_key.key_enc, tag, iv, nrounds);
 		put_unaligned_be32(2, iv + GCM_IV_SIZE);

-		while (walk.nbytes >= AES_BLOCK_SIZE) {
+		while (walk.nbytes >= (2 * AES_BLOCK_SIZE)) {
 			int blocks = walk.nbytes / AES_BLOCK_SIZE;
 			u8 *dst = walk.dst.virt.addr;
 			u8 *src = walk.src.virt.addr;
@ -564,11 +571,21 @@ static int gcm_decrypt(struct aead_request *req)
 			} while (--blocks > 0);

 			err = skcipher_walk_done(&walk,
-						 walk.nbytes % AES_BLOCK_SIZE);
+						 walk.nbytes % (2 * AES_BLOCK_SIZE));
 		}
-		if (walk.nbytes)
+		if (walk.nbytes) {
+			if (walk.nbytes > AES_BLOCK_SIZE) {
+				u8 *iv2 = iv + AES_BLOCK_SIZE;
+
+				memcpy(iv2, iv, AES_BLOCK_SIZE);
+				crypto_inc(iv2, AES_BLOCK_SIZE);
+
+				__aes_arm64_encrypt(ctx->aes_key.key_enc, iv2,
+						    iv2, nrounds);
+			}
 			__aes_arm64_encrypt(ctx->aes_key.key_enc, iv, iv,
 					    nrounds);
+		}
 	}

 	/* handle the tail */
--- a/arch/arm64/crypto/sm4-ce-glue.c
+++ b/arch/arm64/crypto/sm4-ce-glue.c
@ -69,5 +69,5 @@ static void __exit sm4_ce_mod_fini(void)
 	crypto_unregister_alg(&sm4_ce_alg);
 }

-module_cpu_feature_match(SM3, sm4_ce_mod_init);
+module_cpu_feature_match(SM4, sm4_ce_mod_init);
 module_exit(sm4_ce_mod_fini);
--- a/arch/arm64/include/asm/jump_label.h
+++ b/arch/arm64/include/asm/jump_label.h
@ -28,7 +28,7 @@

 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm goto("1: nop\n\t"
+	asm_volatile_goto("1: nop\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".align 3\n\t"
 		 ".quad 1b, %l[l_yes], %c0\n\t"
@ -42,7 +42,7 @@ l_yes:

 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm goto("1: b %l[l_yes]\n\t"
+	asm_volatile_goto("1: b %l[l_yes]\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".align 3\n\t"
 		 ".quad 1b, %l[l_yes], %c0\n\t"
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@ -61,8 +61,7 @@ struct kvm_arch {
 	u64    vmid_gen;
 	u32    vmid;

-	/* 1-level 2nd stage table and lock */
-	spinlock_t pgd_lock;
+	/* 1-level 2nd stage table, protected by kvm->mmu_lock */
 	pgd_t *pgd;

 	/* VTTBR value associated with above pgd and vmid */
@ -357,7 +356,6 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
 			      struct kvm_vcpu_events *events);

 #define KVM_ARCH_WANT_MMU_NOTIFIER
-int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
 int kvm_unmap_hva_range(struct kvm *kvm,
 			unsigned long start, unsigned long end);
 void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@ -54,6 +54,7 @@ arm64-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o	\
 arm64-obj-$(CONFIG_ARM64_RELOC_TEST)	+= arm64-reloc-test.o
 arm64-reloc-test-y := reloc_test_core.o reloc_test_syms.o
 arm64-obj-$(CONFIG_CRASH_DUMP)		+= crash_dump.o
+arm64-obj-$(CONFIG_CRASH_CORE)		+= crash_core.o
 arm64-obj-$(CONFIG_ARM_SDE_INTERFACE)	+= sdei.o
 arm64-obj-$(CONFIG_ARM64_SSBD)		+= ssbd.o

--- a/arch/arm64/kernel/crash_core.c
+++ b/arch/arm64/kernel/crash_core.c
@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) Linaro.
+ * Copyright (C) Huawei Futurewei Technologies.
+ */
+
+#include <linux/crash_core.h>
+#include <asm/memory.h>
+
+void arch_crash_save_vmcoreinfo(void)
+{
+	VMCOREINFO_NUMBER(VA_BITS);
+	/* Please note VMCOREINFO_NUMBER() uses "%d", not "%x" */
+	vmcoreinfo_append_str("NUMBER(kimage_voffset)=0x%llx\n",
+						kimage_voffset);
+	vmcoreinfo_append_str("NUMBER(PHYS_OFFSET)=0x%llx\n",
+						PHYS_OFFSET);
+	vmcoreinfo_append_str("KERNELOFFSET=%lx\n", kaslr_offset());
+}
--- a/arch/arm64/kernel/machine_kexec.c
+++ b/arch/arm64/kernel/machine_kexec.c
@ -358,14 +358,3 @@ void crash_free_reserved_phys_range(unsigned long begin, unsigned long end)
 	}
 }
 #endif /* CONFIG_HIBERNATION */
-
-void arch_crash_save_vmcoreinfo(void)
-{
-	VMCOREINFO_NUMBER(VA_BITS);
-	/* Please note VMCOREINFO_NUMBER() uses "%d", not "%x" */
-	vmcoreinfo_append_str("NUMBER(kimage_voffset)=0x%llx\n",
-						kimage_voffset);
-	vmcoreinfo_append_str("NUMBER(PHYS_OFFSET)=0x%llx\n",
-						PHYS_OFFSET);
-	vmcoreinfo_append_str("KERNELOFFSET=%lx\n", kaslr_offset());
-}
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@ -98,8 +98,10 @@ static void activate_traps_vhe(struct kvm_vcpu *vcpu)
 	val = read_sysreg(cpacr_el1);
 	val |= CPACR_EL1_TTA;
 	val &= ~CPACR_EL1_ZEN;
-	if (!update_fp_enabled(vcpu))
+	if (!update_fp_enabled(vcpu)) {
 		val &= ~CPACR_EL1_FPEN;
+		__activate_traps_fpsimd32(vcpu);
+	}

 	write_sysreg(val, cpacr_el1);

@ -114,8 +116,10 @@ static void __hyp_text __activate_traps_nvhe(struct kvm_vcpu *vcpu)

 	val = CPTR_EL2_DEFAULT;
 	val |= CPTR_EL2_TTA | CPTR_EL2_TZ;
-	if (!update_fp_enabled(vcpu))
+	if (!update_fp_enabled(vcpu)) {
 		val |= CPTR_EL2_TFP;
+		__activate_traps_fpsimd32(vcpu);
+	}

 	write_sysreg(val, cptr_el2);
 }
@ -129,7 +133,6 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
 	if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN) && (hcr & HCR_VSE))
 		write_sysreg_s(vcpu->arch.vsesr_el2, SYS_VSESR_EL2);

-	__activate_traps_fpsimd32(vcpu);
 	if (has_vhe())
 		activate_traps_vhe(vcpu);
 	else
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@ -985,8 +985,9 @@ int pmd_free_pte_page(pmd_t *pmdp, unsigned long addr)

 	pmd = READ_ONCE(*pmdp);

-	/* No-op for empty entry and WARN_ON for valid entry */
-	if (!pmd_present(pmd) || !pmd_table(pmd)) {
+	if (!pmd_present(pmd))
+		return 1;
+	if (!pmd_table(pmd)) {
 		VM_WARN_ON(!pmd_table(pmd));
 		return 1;
 	}
@ -1007,8 +1008,9 @@ int pud_free_pmd_page(pud_t *pudp, unsigned long addr)

 	pud = READ_ONCE(*pudp);

-	/* No-op for empty entry and WARN_ON for valid entry */
-	if (!pud_present(pud) || !pud_table(pud)) {
+	if (!pud_present(pud))
+		return 1;
+	if (!pud_table(pud)) {
 		VM_WARN_ON(!pud_table(pud));
 		return 1;
 	}
--- a/arch/hexagon/include/asm/bitops.h
+++ b/arch/hexagon/include/asm/bitops.h
@ -211,7 +211,7 @@ static inline long ffz(int x)
 * This is defined the same way as ffs.
 * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
 */
-static inline long fls(int x)
+static inline int fls(int x)
 {
 	int r;

@ -232,7 +232,7 @@ static inline long fls(int x)
 * the libc and compiler builtin ffs routines, therefore
 * differs in spirit from the above ffz (man ffs).
 */
-static inline long ffs(int x)
+static inline int ffs(int x)
 {
 	int r;

--- a/arch/hexagon/kernel/dma.c
+++ b/arch/hexagon/kernel/dma.c
@ -60,7 +60,7 @@ static void *hexagon_dma_alloc_coherent(struct device *dev, size_t size,
 			panic("Can't create %s() memory pool!", __func__);
 		else
 			gen_pool_add(coherent_pool,
-				pfn_to_virt(max_low_pfn),
+				(unsigned long)pfn_to_virt(max_low_pfn),
 				hexagon_coherent_pool_size, -1);
 	}

--- a/arch/m68k/mac/misc.c
+++ b/arch/m68k/mac/misc.c
@ -98,11 +98,10 @@ static time64_t pmu_read_time(void)

 	if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
 		return 0;
-	while (!req.complete)
-		pmu_poll();
+	pmu_wait_complete(&req);

-	time = (u32)((req.reply[1] << 24) | (req.reply[2] << 16) |
-		     (req.reply[3] << 8) | req.reply[4]);
+	time = (u32)((req.reply[0] << 24) | (req.reply[1] << 16) |
+		     (req.reply[2] << 8) | req.reply[3]);

 	return time - RTC_OFFSET;
 }
@ -116,8 +115,7 @@ static void pmu_write_time(time64_t time)
 			(data >> 24) & 0xFF, (data >> 16) & 0xFF,
 			(data >> 8) & 0xFF, data & 0xFF) < 0)
 		return;
-	while (!req.complete)
-		pmu_poll();
+	pmu_wait_complete(&req);
 }

 static __u8 pmu_read_pram(int offset)
--- a/arch/m68k/mm/mcfmmu.c
+++ b/arch/m68k/mm/mcfmmu.c
@ -172,7 +172,7 @@ void __init cf_bootmem_alloc(void)
 	high_memory = (void *)_ramend;

 	/* Reserve kernel text/data/bss */
-	memblock_reserve(memstart, memstart - _rambase);
+	memblock_reserve(_rambase, memstart - _rambase);

 	m68k_virt_to_node_shift = fls(_ramend - 1) - 6;
 	module_fixup(NULL, __start_fixup, __stop_fixup);
--- a/arch/mips/include/asm/kvm_host.h
+++ b/arch/mips/include/asm/kvm_host.h
@ -931,7 +931,6 @@ enum kvm_mips_fault_result kvm_trap_emul_gva_fault(struct kvm_vcpu *vcpu,
 						   bool write);

 #define KVM_ARCH_WANT_MMU_NOTIFIER
-int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
 int kvm_unmap_hva_range(struct kvm *kvm,
 			unsigned long start, unsigned long end);
 void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
--- a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
@ -40,6 +40,7 @@ struct ltq_dma_channel {
 	int desc;			/* the current descriptor */
 	struct ltq_dma_desc *desc_base; /* the descriptor base */
 	int phys;			/* physical addr */
+	struct device *dev;
 };

 enum {
--- a/arch/mips/kernel/vdso.c
+++ b/arch/mips/kernel/vdso.c
@ -13,6 +13,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
@ -20,6 +21,7 @@

 #include <asm/abi.h>
 #include <asm/mips-cps.h>
+#include <asm/page.h>
 #include <asm/vdso.h>

 /* Kernel-provided data used by the VDSO. */
@ -128,12 +130,30 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 	vvar_size = gic_size + PAGE_SIZE;
 	size = vvar_size + image->size;

+	/*
+	 * Find a region that's large enough for us to perform the
+	 * colour-matching alignment below.
+	 */
+	if (cpu_has_dc_aliases)
+		size += shm_align_mask + 1;
+
 	base = get_unmapped_area(NULL, 0, size, 0, 0);
 	if (IS_ERR_VALUE(base)) {
 		ret = base;
 		goto out;
 	}

+	/*
+	 * If we suffer from dcache aliasing, ensure that the VDSO data page
+	 * mapping is coloured the same as the kernel's mapping of that memory.
+	 * This ensures that when the kernel updates the VDSO data userland
+	 * will observe it without requiring cache invalidations.
+	 */
+	if (cpu_has_dc_aliases) {
+		base = __ALIGN_MASK(base, shm_align_mask);
+		base += ((unsigned long)&vdso_data - gic_size) & shm_align_mask;
+	}
+
 	data_addr = base + gic_size;
 	vdso_addr = data_addr + PAGE_SIZE;

--- a/arch/mips/kvm/mmu.c
+++ b/arch/mips/kvm/mmu.c
@ -512,16 +512,6 @@ static int kvm_unmap_hva_handler(struct kvm *kvm, gfn_t gfn, gfn_t gfn_end,
 	return 1;
 }

-int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
-{
-	unsigned long end = hva + PAGE_SIZE;
-
-	handle_hva_to_gpa(kvm, hva, end, &kvm_unmap_hva_handler, NULL);
-
-	kvm_mips_callbacks->flush_shadow_all(kvm);
-	return 0;
-}
-
 int kvm_unmap_hva_range(struct kvm *kvm, unsigned long start, unsigned long end)
 {
 	handle_hva_to_gpa(kvm, start, end, &kvm_unmap_hva_handler, NULL);
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@ -130,7 +130,7 @@ ltq_dma_alloc(struct ltq_dma_channel *ch)
 	unsigned long flags;

 	ch->desc = 0;
-	ch->desc_base = dma_zalloc_coherent(NULL,
+	ch->desc_base = dma_zalloc_coherent(ch->dev,
 				LTQ_DESC_NUM * LTQ_DESC_SIZE,
 				&ch->phys, GFP_ATOMIC);

@ -182,7 +182,7 @@ ltq_dma_free(struct ltq_dma_channel *ch)
 	if (!ch->desc_base)
 		return;
 	ltq_dma_close(ch);
-	dma_free_coherent(NULL, LTQ_DESC_NUM * LTQ_DESC_SIZE,
+	dma_free_coherent(ch->dev, LTQ_DESC_NUM * LTQ_DESC_SIZE,
 		ch->desc_base, ch->phys);
 }
 EXPORT_SYMBOL_GPL(ltq_dma_free);
--- a/arch/nds32/Kconfig
+++ b/arch/nds32/Kconfig
@ -40,6 +40,10 @@ config NDS32
 	select NO_IOPORT_MAP
 	select RTC_LIB
 	select THREAD_INFO_IN_TASK
+	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_DYNAMIC_FTRACE
 	help
 	  Andes(nds32) Linux support.

--- a/arch/nds32/Makefile
+++ b/arch/nds32/Makefile
@ -5,6 +5,10 @@ KBUILD_DEFCONFIG := defconfig

 comma = ,

+ifdef CONFIG_FUNCTION_TRACER
+arch-y += -malways-save-lp -mno-relax
+endif
+
 KBUILD_CFLAGS	+= $(call cc-option, -mno-sched-prolog-epilog)
 KBUILD_CFLAGS	+= -mcmodel=large

--- a/arch/nds32/include/asm/elf.h
+++ b/arch/nds32/include/asm/elf.h
@ -121,9 +121,9 @@ struct elf32_hdr;
 */
 #define ELF_CLASS	ELFCLASS32
 #ifdef __NDS32_EB__
-#define ELF_DATA	ELFDATA2MSB;
+#define ELF_DATA	ELFDATA2MSB
 #else
-#define ELF_DATA	ELFDATA2LSB;
+#define ELF_DATA	ELFDATA2LSB
 #endif
 #define ELF_ARCH	EM_NDS32
 #define USE_ELF_CORE_DUMP
--- a/arch/nds32/include/asm/ftrace.h
+++ b/arch/nds32/include/asm/ftrace.h
@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __ASM_NDS32_FTRACE_H
+#define __ASM_NDS32_FTRACE_H
+
+#ifdef CONFIG_FUNCTION_TRACER
+
+#define HAVE_FUNCTION_GRAPH_FP_TEST
+
+#define MCOUNT_ADDR ((unsigned long)(_mcount))
+/* mcount call is composed of three instructions:
+ * sethi + ori + jral
+ */
+#define MCOUNT_INSN_SIZE 12
+
+extern void _mcount(unsigned long parent_ip);
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+#define FTRACE_ADDR ((unsigned long)_ftrace_caller)
+
+#ifdef __NDS32_EL__
+#define INSN_NOP		0x09000040
+#define INSN_SIZE(insn)		(((insn & 0x00000080) == 0) ? 4 : 2)
+#define IS_SETHI(insn)		((insn & 0x000000fe) == 0x00000046)
+#define ENDIAN_CONVERT(insn)	be32_to_cpu(insn)
+#else /* __NDS32_EB__ */
+#define INSN_NOP		0x40000009
+#define INSN_SIZE(insn)		(((insn & 0x80000000) == 0) ? 4 : 2)
+#define IS_SETHI(insn)		((insn & 0xfe000000) == 0x46000000)
+#define ENDIAN_CONVERT(insn)	(insn)
+#endif
+
+extern void _ftrace_caller(unsigned long parent_ip);
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr;
+}
+struct dyn_arch_ftrace {
+};
+
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#endif /* CONFIG_FUNCTION_TRACER */
+
+#endif /* __ASM_NDS32_FTRACE_H */
--- a/arch/nds32/include/asm/nds32.h
+++ b/arch/nds32/include/asm/nds32.h
@ -17,6 +17,7 @@
 #else
 #define FP_OFFSET (-2)
 #endif
+#define LP_OFFSET (-1)

 extern void __init early_trap_init(void);
 static inline void GIE_ENABLE(void)
--- a/arch/nds32/include/asm/uaccess.h
+++ b/arch/nds32/include/asm/uaccess.h
@ -38,7 +38,7 @@ struct exception_table_entry {
 extern int fixup_exception(struct pt_regs *regs);

 #define KERNEL_DS 	((mm_segment_t) { ~0UL })
-#define USER_DS     	((mm_segment_t) {TASK_SIZE - 1})
+#define USER_DS		((mm_segment_t) {TASK_SIZE - 1})

 #define get_ds()	(KERNEL_DS)
 #define get_fs()	(current_thread_info()->addr_limit)
@ -49,11 +49,11 @@ static inline void set_fs(mm_segment_t fs)
 	current_thread_info()->addr_limit = fs;
 }

-#define segment_eq(a, b)    ((a) == (b))
+#define segment_eq(a, b)	((a) == (b))

 #define __range_ok(addr, size) (size <= get_fs() && addr <= (get_fs() -size))

-#define access_ok(type, addr, size)                 \
+#define access_ok(type, addr, size)	\
 	__range_ok((unsigned long)addr, (unsigned long)size)
 /*
 * Single-value transfer routines.  They automatically use the right
@ -75,70 +75,73 @@ static inline void set_fs(mm_segment_t fs)
 * versions are void (ie, don't return a value as such).
 */

-#define get_user(x,p)							\
-({									\
-	long __e = -EFAULT;						\
-	if(likely(access_ok(VERIFY_READ,  p, sizeof(*p)))) {		\
-		__e = __get_user(x,p);					\
-	} else								\
-		x = 0;							\
-	__e;								\
-})
-#define __get_user(x,ptr)						\
+#define get_user	__get_user					\
+
+#define __get_user(x, ptr)						\
 ({									\
 	long __gu_err = 0;						\
-	__get_user_err((x),(ptr),__gu_err);				\
+	__get_user_check((x), (ptr), __gu_err);				\
 	__gu_err;							\
 })

-#define __get_user_error(x,ptr,err)					\
+#define __get_user_error(x, ptr, err)					\
 ({									\
-	__get_user_err((x),(ptr),err);					\
-	(void) 0;							\
+	__get_user_check((x), (ptr), (err));				\
+	(void)0;							\
 })

-#define __get_user_err(x,ptr,err)					\
+#define __get_user_check(x, ptr, err)					\
+({									\
+	const __typeof__(*(ptr)) __user *__p = (ptr);			\
+	might_fault();							\
+	if (access_ok(VERIFY_READ, __p, sizeof(*__p))) {		\
+		__get_user_err((x), __p, (err));			\
+	} else {							\
+		(x) = 0; (err) = -EFAULT;				\
+	}								\
+})
+
+#define __get_user_err(x, ptr, err)					\
 do {									\
-	unsigned long __gu_addr = (unsigned long)(ptr);			\
 	unsigned long __gu_val;						\
 	__chk_user_ptr(ptr);						\
 	switch (sizeof(*(ptr))) {					\
 	case 1:								\
-		__get_user_asm("lbi",__gu_val,__gu_addr,err);		\
+		__get_user_asm("lbi", __gu_val, (ptr), (err));		\
 		break;							\
 	case 2:								\
-		__get_user_asm("lhi",__gu_val,__gu_addr,err);		\
+		__get_user_asm("lhi", __gu_val, (ptr), (err));		\
 		break;							\
 	case 4:								\
-		__get_user_asm("lwi",__gu_val,__gu_addr,err);		\
+		__get_user_asm("lwi", __gu_val, (ptr), (err));		\
 		break;							\
 	case 8:								\
-		__get_user_asm_dword(__gu_val,__gu_addr,err);		\
+		__get_user_asm_dword(__gu_val, (ptr), (err));		\
 		break;							\
 	default:							\
 		BUILD_BUG(); 						\
 		break;							\
 	}								\
-	(x) = (__typeof__(*(ptr)))__gu_val;				\
+	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
 } while (0)

-#define __get_user_asm(inst,x,addr,err)					\
-	asm volatile(							\
-	"1:	"inst"	%1,[%2]\n"					\
-	"2:\n"								\
-	"	.section .fixup,\"ax\"\n"				\
-	"	.align	2\n"						\
-	"3:	move %0, %3\n"						\
-	"	move %1, #0\n"						\
-	"	b	2b\n"						\
-	"	.previous\n"						\
-	"	.section __ex_table,\"a\"\n"				\
-	"	.align	3\n"						\
-	"	.long	1b, 3b\n"					\
-	"	.previous"						\
-	: "+r" (err), "=&r" (x)						\
-	: "r" (addr), "i" (-EFAULT)					\
-	: "cc")
+#define __get_user_asm(inst, x, addr, err)				\
+	__asm__ __volatile__ (						\
+		"1:	"inst"	%1,[%2]\n"				\
+		"2:\n"							\
+		"	.section .fixup,\"ax\"\n"			\
+		"	.align	2\n"					\
+		"3:	move %0, %3\n"					\
+		"	move %1, #0\n"					\
+		"	b	2b\n"					\
+		"	.previous\n"					\
+		"	.section __ex_table,\"a\"\n"			\
+		"	.align	3\n"					\
+		"	.long	1b, 3b\n"				\
+		"	.previous"					\
+		: "+r" (err), "=&r" (x)					\
+		: "r" (addr), "i" (-EFAULT)				\
+		: "cc")

 #ifdef __NDS32_EB__
 #define __gu_reg_oper0 "%H1"
@ -149,61 +152,66 @@ do {									\
 #endif

 #define __get_user_asm_dword(x, addr, err) 				\
-	asm volatile(			    				\
-	"\n1:\tlwi " __gu_reg_oper0 ",[%2]\n"				\
-	"\n2:\tlwi " __gu_reg_oper1 ",[%2+4]\n"				\
-	"3:\n"								\
-	"	.section .fixup,\"ax\"\n"				\
-	"	.align	2\n"						\
-	"4:	move	%0, %3\n"					\
-	"	b	3b\n"						\
-	"	.previous\n"						\
-	"	.section __ex_table,\"a\"\n"				\
-	"	.align	3\n"						\
-	"	.long	1b, 4b\n"					\
-	"	.long	2b, 4b\n"					\
-	"	.previous"						\
-	: "+r"(err), "=&r"(x)                				\
-	: "r"(addr), "i"(-EFAULT) 					\
-	: "cc")
-#define put_user(x,p)							\
-({									\
-	long __e = -EFAULT;						\
-	if(likely(access_ok(VERIFY_WRITE,  p, sizeof(*p)))) {		\
-		__e = __put_user(x,p);					\
-	}								\
-	__e;								\
-})
-#define __put_user(x,ptr)						\
+	__asm__ __volatile__ (						\
+		"\n1:\tlwi " __gu_reg_oper0 ",[%2]\n"			\
+		"\n2:\tlwi " __gu_reg_oper1 ",[%2+4]\n"			\
+		"3:\n"							\
+		"	.section .fixup,\"ax\"\n"			\
+		"	.align	2\n"					\
+		"4:	move	%0, %3\n"				\
+		"	b	3b\n"					\
+		"	.previous\n"					\
+		"	.section __ex_table,\"a\"\n"			\
+		"	.align	3\n"					\
+		"	.long	1b, 4b\n"				\
+		"	.long	2b, 4b\n"				\
+		"	.previous"					\
+		: "+r"(err), "=&r"(x)					\
+		: "r"(addr), "i"(-EFAULT)				\
+		: "cc")
+
+#define put_user	__put_user					\
+
+#define __put_user(x, ptr)						\
 ({									\
 	long __pu_err = 0;						\
-	__put_user_err((x),(ptr),__pu_err);				\
+	__put_user_err((x), (ptr), __pu_err);				\
 	__pu_err;							\
 })

-#define __put_user_error(x,ptr,err)					\
+#define __put_user_error(x, ptr, err)					\
 ({									\
-	__put_user_err((x),(ptr),err);					\
-	(void) 0;							\
+	__put_user_err((x), (ptr), (err));				\
+	(void)0;							\
 })

-#define __put_user_err(x,ptr,err)					\
+#define __put_user_check(x, ptr, err)					\
+({									\
+	__typeof__(*(ptr)) __user *__p = (ptr);				\
+	might_fault();							\
+	if (access_ok(VERIFY_WRITE, __p, sizeof(*__p))) {		\
+		__put_user_err((x), __p, (err));			\
+	} else	{							\
+		(err) = -EFAULT;					\
+	}								\
+})
+
+#define __put_user_err(x, ptr, err)					\
 do {									\
-	unsigned long __pu_addr = (unsigned long)(ptr);			\
 	__typeof__(*(ptr)) __pu_val = (x);				\
 	__chk_user_ptr(ptr);						\
 	switch (sizeof(*(ptr))) {					\
 	case 1:								\
-		__put_user_asm("sbi",__pu_val,__pu_addr,err);		\
+		__put_user_asm("sbi", __pu_val, (ptr), (err));		\
 		break;							\
 	case 2: 							\
-		__put_user_asm("shi",__pu_val,__pu_addr,err);		\
+		__put_user_asm("shi", __pu_val, (ptr), (err));		\
 		break;							\
 	case 4: 							\
-		__put_user_asm("swi",__pu_val,__pu_addr,err);		\
+		__put_user_asm("swi", __pu_val, (ptr), (err));		\
 		break;							\
 	case 8:								\
-		__put_user_asm_dword(__pu_val,__pu_addr,err);		\
+		__put_user_asm_dword(__pu_val, (ptr), (err));		\
 		break;							\
 	default:							\
 		BUILD_BUG(); 						\
@ -211,22 +219,22 @@ do {									\
 	}								\
 } while (0)

-#define __put_user_asm(inst,x,addr,err)					\
-	asm volatile(							\
-	"1:	"inst"	%1,[%2]\n"					\
-	"2:\n"								\
-	"	.section .fixup,\"ax\"\n"				\
-	"	.align	2\n"						\
-	"3:	move	%0, %3\n"					\
-	"	b	2b\n"						\
-	"	.previous\n"						\
-	"	.section __ex_table,\"a\"\n"				\
-	"	.align	3\n"						\
-	"	.long	1b, 3b\n"					\
-	"	.previous"						\
-	: "+r" (err)							\
-	: "r" (x), "r" (addr), "i" (-EFAULT)				\
-	: "cc")
+#define __put_user_asm(inst, x, addr, err)				\
+	__asm__ __volatile__ (						\
+		"1:	"inst"	%1,[%2]\n"				\
+		"2:\n"							\
+		"	.section .fixup,\"ax\"\n"			\
+		"	.align	2\n"					\
+		"3:	move	%0, %3\n"				\
+		"	b	2b\n"					\
+		"	.previous\n"					\
+		"	.section __ex_table,\"a\"\n"			\
+		"	.align	3\n"					\
+		"	.long	1b, 3b\n"				\
+		"	.previous"					\
+		: "+r" (err)						\
+		: "r" (x), "r" (addr), "i" (-EFAULT)			\
+		: "cc")

 #ifdef __NDS32_EB__
 #define __pu_reg_oper0 "%H2"
@ -237,23 +245,24 @@ do {									\
 #endif

 #define __put_user_asm_dword(x, addr, err) 				\
-	asm volatile(			    				\
-	"\n1:\tswi " __pu_reg_oper0 ",[%1]\n"				\
-	"\n2:\tswi " __pu_reg_oper1 ",[%1+4]\n"				\
-	"3:\n"								\
-	"	.section .fixup,\"ax\"\n"				\
-	"	.align	2\n"						\
-	"4:	move	%0, %3\n"					\
-	"	b	3b\n"						\
-	"	.previous\n"						\
-	"	.section __ex_table,\"a\"\n"				\
-	"	.align	3\n"						\
-	"	.long	1b, 4b\n"					\
-	"	.long	2b, 4b\n"					\
-	"	.previous"						\
-	: "+r"(err)                					\
-	: "r"(addr), "r"(x), "i"(-EFAULT) 				\
-	: "cc")
+	__asm__ __volatile__ (						\
+		"\n1:\tswi " __pu_reg_oper0 ",[%1]\n"			\
+		"\n2:\tswi " __pu_reg_oper1 ",[%1+4]\n"			\
+		"3:\n"							\
+		"	.section .fixup,\"ax\"\n"			\
+		"	.align	2\n"					\
+		"4:	move	%0, %3\n"				\
+		"	b	3b\n"					\
+		"	.previous\n"					\
+		"	.section __ex_table,\"a\"\n"			\
+		"	.align	3\n"					\
+		"	.long	1b, 4b\n"				\
+		"	.long	2b, 4b\n"				\
+		"	.previous"					\
+		: "+r"(err)						\
+		: "r"(addr), "r"(x), "i"(-EFAULT)			\
+		: "cc")
+
 extern unsigned long __arch_clear_user(void __user * addr, unsigned long n);
 extern long strncpy_from_user(char *dest, const char __user * src, long count);
 extern __must_check long strlen_user(const char __user * str);
--- a/arch/nds32/kernel/Makefile
+++ b/arch/nds32/kernel/Makefile
@ -21,3 +21,9 @@ extra-y := head.o vmlinux.lds


 obj-y				+= vdso/
+
+obj-$(CONFIG_FUNCTION_TRACER)   += ftrace.o
+
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_ftrace.o = $(CC_FLAGS_FTRACE)
+endif
--- a/arch/nds32/kernel/atl2c.c
+++ b/arch/nds32/kernel/atl2c.c
@ -9,7 +9,8 @@

 void __iomem *atl2c_base;
 static const struct of_device_id atl2c_ids[] __initconst = {
-	{.compatible = "andestech,atl2c",}
+	{.compatible = "andestech,atl2c",},
+	{}
 };

 static int __init atl2c_of_init(void)
--- a/arch/nds32/kernel/ex-entry.S
+++ b/arch/nds32/kernel/ex-entry.S
@ -118,7 +118,7 @@ common_exception_handler:
 	/* interrupt */
 2:
 #ifdef CONFIG_TRACE_IRQFLAGS
-	jal     trace_hardirqs_off
+	jal     __trace_hardirqs_off
 #endif
 	move	$r0, $sp
 	sethi	$lp, hi20(ret_from_intr)
--- a/arch/nds32/kernel/ex-exit.S
+++ b/arch/nds32/kernel/ex-exit.S
@ -138,8 +138,8 @@ no_work_pending:
 #ifdef CONFIG_TRACE_IRQFLAGS
 	lwi	$p0, [$sp+(#IPSW_OFFSET)]
 	andi	$p0, $p0, #0x1
-	la	$r10, trace_hardirqs_off
-	la	$r9, trace_hardirqs_on
+	la	$r10, __trace_hardirqs_off
+	la	$r9, __trace_hardirqs_on
 	cmovz	$r9, $p0, $r10
 	jral	$r9
 #endif
--- a/arch/nds32/kernel/ftrace.c
+++ b/arch/nds32/kernel/ftrace.c
@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/ftrace.h>
+#include <linux/uaccess.h>
+#include <asm/cacheflush.h>
+
+#ifndef CONFIG_DYNAMIC_FTRACE
+extern void (*ftrace_trace_function)(unsigned long, unsigned long,
+				     struct ftrace_ops*, struct pt_regs*);
+extern int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace);
+extern void ftrace_graph_caller(void);
+
+noinline void __naked ftrace_stub(unsigned long ip, unsigned long parent_ip,
+				  struct ftrace_ops *op, struct pt_regs *regs)
+{
+	__asm__ ("");  /* avoid to optimize as pure function */
+}
+
+noinline void _mcount(unsigned long parent_ip)
+{
+	/* save all state by the compiler prologue */
+
+	unsigned long ip = (unsigned long)__builtin_return_address(0);
+
+	if (ftrace_trace_function != ftrace_stub)
+		ftrace_trace_function(ip - MCOUNT_INSN_SIZE, parent_ip,
+				      NULL, NULL);
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	if (ftrace_graph_return != (trace_func_graph_ret_t)ftrace_stub
+	    || ftrace_graph_entry != ftrace_graph_entry_stub)
+		ftrace_graph_caller();
+#endif
+
+	/* restore all state by the compiler epilogue */
+}
+EXPORT_SYMBOL(_mcount);
+
+#else /* CONFIG_DYNAMIC_FTRACE */
+
+noinline void __naked ftrace_stub(unsigned long ip, unsigned long parent_ip,
+				  struct ftrace_ops *op, struct pt_regs *regs)
+{
+	__asm__ ("");  /* avoid to optimize as pure function */
+}
+
+noinline void __naked _mcount(unsigned long parent_ip)
+{
+	__asm__ ("");  /* avoid to optimize as pure function */
+}
+EXPORT_SYMBOL(_mcount);
+
+#define XSTR(s) STR(s)
+#define STR(s) #s
+void _ftrace_caller(unsigned long parent_ip)
+{
+	/* save all state needed by the compiler prologue */
+
+	/*
+	 * prepare arguments for real tracing function
+	 * first  arg : __builtin_return_address(0) - MCOUNT_INSN_SIZE
+	 * second arg : parent_ip
+	 */
+	__asm__ __volatile__ (
+		"move $r1, %0				   \n\t"
+		"addi $r0, %1, #-" XSTR(MCOUNT_INSN_SIZE) "\n\t"
+		:
+		: "r" (parent_ip), "r" (__builtin_return_address(0)));
+
+	/* a placeholder for the call to a real tracing function */
+	__asm__ __volatile__ (
+		"ftrace_call:		\n\t"
+		"nop			\n\t"
+		"nop			\n\t"
+		"nop			\n\t");
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/* a placeholder for the call to ftrace_graph_caller */
+	__asm__ __volatile__ (
+		"ftrace_graph_call:	\n\t"
+		"nop			\n\t"
+		"nop			\n\t"
+		"nop			\n\t");
+#endif
+	/* restore all state needed by the compiler epilogue */
+}
+
+int __init ftrace_dyn_arch_init(void)
+{
+	return 0;
+}
+
+int ftrace_arch_code_modify_prepare(void)
+{
+	set_all_modules_text_rw();
+	return 0;
+}
+
+int ftrace_arch_code_modify_post_process(void)
+{
+	set_all_modules_text_ro();
+	return 0;
+}
+
+static unsigned long gen_sethi_insn(unsigned long addr)
+{
+	unsigned long opcode = 0x46000000;
+	unsigned long imm = addr >> 12;
+	unsigned long rt_num = 0xf << 20;
+
+	return ENDIAN_CONVERT(opcode | rt_num | imm);
+}
+
+static unsigned long gen_ori_insn(unsigned long addr)
+{
+	unsigned long opcode = 0x58000000;
+	unsigned long imm = addr & 0x0000fff;
+	unsigned long rt_num = 0xf << 20;
+	unsigned long ra_num = 0xf << 15;
+
+	return ENDIAN_CONVERT(opcode | rt_num | ra_num | imm);
+}
+
+static unsigned long gen_jral_insn(unsigned long addr)
+{
+	unsigned long opcode = 0x4a000001;
+	unsigned long rt_num = 0x1e << 20;
+	unsigned long rb_num = 0xf << 10;
+
+	return ENDIAN_CONVERT(opcode | rt_num | rb_num);
+}
+
+static void ftrace_gen_call_insn(unsigned long *call_insns,
+				 unsigned long addr)
+{
+	call_insns[0] = gen_sethi_insn(addr); /* sethi $r15, imm20u       */
+	call_insns[1] = gen_ori_insn(addr);   /* ori   $r15, $r15, imm15u */
+	call_insns[2] = gen_jral_insn(addr);  /* jral  $lp,  $r15         */
+}
+
+static int __ftrace_modify_code(unsigned long pc, unsigned long *old_insn,
+				unsigned long *new_insn, bool validate)
+{
+	unsigned long orig_insn[3];
+
+	if (validate) {
+		if (probe_kernel_read(orig_insn, (void *)pc, MCOUNT_INSN_SIZE))
+			return -EFAULT;
+		if (memcmp(orig_insn, old_insn, MCOUNT_INSN_SIZE))
+			return -EINVAL;
+	}
+
+	if (probe_kernel_write((void *)pc, new_insn, MCOUNT_INSN_SIZE))
+		return -EPERM;
+
+	return 0;
+}
+
+static int ftrace_modify_code(unsigned long pc, unsigned long *old_insn,
+			      unsigned long *new_insn, bool validate)
+{
+	int ret;
+
+	ret = __ftrace_modify_code(pc, old_insn, new_insn, validate);
+	if (ret)
+		return ret;
+
+	flush_icache_range(pc, pc + MCOUNT_INSN_SIZE);
+
+	return ret;
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	unsigned long pc = (unsigned long)&ftrace_call;
+	unsigned long old_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
+	unsigned long new_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
+
+	if (func != ftrace_stub)
+		ftrace_gen_call_insn(new_insn, (unsigned long)func);
+
+	return ftrace_modify_code(pc, old_insn, new_insn, false);
+}
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned long pc = rec->ip;
+	unsigned long nop_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
+	unsigned long call_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
+
+	ftrace_gen_call_insn(call_insn, addr);
+
+	return ftrace_modify_code(pc, nop_insn, call_insn, true);
+}
+
+int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
+		    unsigned long addr)
+{
+	unsigned long pc = rec->ip;
+	unsigned long nop_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
+	unsigned long call_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
+
+	ftrace_gen_call_insn(call_insn, addr);
+
+	return ftrace_modify_code(pc, call_insn, nop_insn, true);
+}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
+			   unsigned long frame_pointer)
+{
+	unsigned long return_hooker = (unsigned long)&return_to_handler;
+	struct ftrace_graph_ent trace;
+	unsigned long old;
+	int err;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	old = *parent;
+
+	trace.func = self_addr;
+	trace.depth = current->curr_ret_stack + 1;
+
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace))
+		return;
+
+	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
+				       frame_pointer, NULL);
+
+	if (err == -EBUSY)
+		return;
+
+	*parent = return_hooker;
+}
+
+noinline void ftrace_graph_caller(void)
+{
+	unsigned long *parent_ip =
+		(unsigned long *)(__builtin_frame_address(2) - 4);
+
+	unsigned long selfpc =
+		(unsigned long)(__builtin_return_address(1) - MCOUNT_INSN_SIZE);
+
+	unsigned long frame_pointer =
+		(unsigned long)__builtin_frame_address(3);
+
+	prepare_ftrace_return(parent_ip, selfpc, frame_pointer);
+}
+
+extern unsigned long ftrace_return_to_handler(unsigned long frame_pointer);
+void __naked return_to_handler(void)
+{
+	__asm__ __volatile__ (
+		/* save state needed by the ABI     */
+		"smw.adm $r0,[$sp],$r1,#0x0  \n\t"
+
+		/* get original return address      */
+		"move $r0, $fp               \n\t"
+		"bal ftrace_return_to_handler\n\t"
+		"move $lp, $r0               \n\t"
+
+		/* restore state nedded by the ABI  */
+		"lmw.bim $r0,[$sp],$r1,#0x0  \n\t");
+}
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+extern unsigned long ftrace_graph_call;
+
+static int ftrace_modify_graph_caller(bool enable)
+{
+	unsigned long pc = (unsigned long)&ftrace_graph_call;
+	unsigned long nop_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
+	unsigned long call_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
+
+	ftrace_gen_call_insn(call_insn, (unsigned long)ftrace_graph_caller);
+
+	if (enable)
+		return ftrace_modify_code(pc, nop_insn, call_insn, true);
+	else
+		return ftrace_modify_code(pc, call_insn, nop_insn, true);
+}
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	return ftrace_modify_graph_caller(true);
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	return ftrace_modify_graph_caller(false);
+}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+noinline void __trace_hardirqs_off(void)
+{
+	trace_hardirqs_off();
+}
+noinline void __trace_hardirqs_on(void)
+{
+	trace_hardirqs_on();
+}
+#endif /* CONFIG_TRACE_IRQFLAGS */
--- a/arch/nds32/kernel/module.c
+++ b/arch/nds32/kernel/module.c
@ -40,7 +40,7 @@ void do_reloc16(unsigned int val, unsigned int *loc, unsigned int val_mask,

 	tmp2 = tmp & loc_mask;
 	if (partial_in_place) {
-		tmp &= (!loc_mask);
+		tmp &= (~loc_mask);
 		tmp =
 		    tmp2 | ((tmp + ((val & val_mask) >> val_shift)) & val_mask);
 	} else {
@ -70,7 +70,7 @@ void do_reloc32(unsigned int val, unsigned int *loc, unsigned int val_mask,

 	tmp2 = tmp & loc_mask;
 	if (partial_in_place) {
-		tmp &= (!loc_mask);
+		tmp &= (~loc_mask);
 		tmp =
 		    tmp2 | ((tmp + ((val & val_mask) >> val_shift)) & val_mask);
 	} else {
--- a/arch/nds32/kernel/stacktrace.c
+++ b/arch/nds32/kernel/stacktrace.c
@ -4,6 +4,7 @@
 #include <linux/sched/debug.h>
 #include <linux/sched/task_stack.h>
 #include <linux/stacktrace.h>
+#include <linux/ftrace.h>

 void save_stack_trace(struct stack_trace *trace)
 {
@ -16,6 +17,7 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 	unsigned long *fpn;
 	int skip = trace->skip;
 	int savesched;
+	int graph_idx = 0;

 	if (tsk == current) {
 		__asm__ __volatile__("\tori\t%0, $fp, #0\n":"=r"(fpn));
@ -29,10 +31,12 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 	       && (fpn >= (unsigned long *)TASK_SIZE)) {
 		unsigned long lpp, fpp;

-		lpp = fpn[-1];
+		lpp = fpn[LP_OFFSET];
 		fpp = fpn[FP_OFFSET];
 		if (!__kernel_text_address(lpp))
 			break;
+		else
+			lpp = ftrace_graph_ret_addr(tsk, &graph_idx, lpp, NULL);

 		if (savesched || !in_sched_functions(lpp)) {
 			if (skip) {
--- a/arch/nds32/kernel/traps.c
+++ b/arch/nds32/kernel/traps.c
@ -8,6 +8,7 @@
 #include <linux/kdebug.h>
 #include <linux/sched/task_stack.h>
 #include <linux/uaccess.h>
+#include <linux/ftrace.h>

 #include <asm/proc-fns.h>
 #include <asm/unistd.h>
@ -94,28 +95,6 @@ static void dump_instr(struct pt_regs *regs)
 	set_fs(fs);
 }

-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-#include <linux/ftrace.h>
-static void
-get_real_ret_addr(unsigned long *addr, struct task_struct *tsk, int *graph)
-{
-	if (*addr == (unsigned long)return_to_handler) {
-		int index = tsk->curr_ret_stack;
-
-		if (tsk->ret_stack && index >= *graph) {
-			index -= *graph;
-			*addr = tsk->ret_stack[index].ret;
-			(*graph)++;
-		}
-	}
-}
-#else
-static inline void
-get_real_ret_addr(unsigned long *addr, struct task_struct *tsk, int *graph)
-{
-}
-#endif
-
 #define LOOP_TIMES (100)
 static void __dump(struct task_struct *tsk, unsigned long *base_reg)
 {
@ -126,7 +105,8 @@ static void __dump(struct task_struct *tsk, unsigned long *base_reg)
 		while (!kstack_end(base_reg)) {
 			ret_addr = *base_reg++;
 			if (__kernel_text_address(ret_addr)) {
-				get_real_ret_addr(&ret_addr, tsk, &graph);
+				ret_addr = ftrace_graph_ret_addr(
+						tsk, &graph, ret_addr, NULL);
 				print_ip_sym(ret_addr);
 			}
 			if (--cnt < 0)
@ -137,15 +117,12 @@ static void __dump(struct task_struct *tsk, unsigned long *base_reg)
 		       !((unsigned long)base_reg & 0x3) &&
 		       ((unsigned long)base_reg >= TASK_SIZE)) {
 			unsigned long next_fp;
-#if !defined(NDS32_ABI_2)
-			ret_addr = base_reg[0];
-			next_fp = base_reg[1];
-#else
-			ret_addr = base_reg[-1];
+			ret_addr = base_reg[LP_OFFSET];
 			next_fp = base_reg[FP_OFFSET];
-#endif
 			if (__kernel_text_address(ret_addr)) {
-				get_real_ret_addr(&ret_addr, tsk, &graph);
+
+				ret_addr = ftrace_graph_ret_addr(
+						tsk, &graph, ret_addr, NULL);
 				print_ip_sym(ret_addr);
 			}
 			if (--cnt < 0)
@ -196,11 +173,10 @@ void die(const char *str, struct pt_regs *regs, int err)
 	pr_emerg("CPU: %i\n", smp_processor_id());
 	show_regs(regs);
 	pr_emerg("Process %s (pid: %d, stack limit = 0x%p)\n",
-		 tsk->comm, tsk->pid, task_thread_info(tsk) + 1);
+		 tsk->comm, tsk->pid, end_of_stack(tsk));

 	if (!user_mode(regs) || in_interrupt()) {
-		dump_mem("Stack: ", regs->sp,
-			 THREAD_SIZE + (unsigned long)task_thread_info(tsk));
+		dump_mem("Stack: ", regs->sp, (regs->sp + PAGE_SIZE) & PAGE_MASK);
 		dump_instr(regs);
 		dump_stack();
 	}
--- a/arch/nds32/kernel/vmlinux.lds.S
+++ b/arch/nds32/kernel/vmlinux.lds.S
@ -13,14 +13,26 @@ OUTPUT_ARCH(nds32)
 ENTRY(_stext_lma)
 jiffies = jiffies_64;

+#if defined(CONFIG_GCOV_KERNEL)
+#define NDS32_EXIT_KEEP(x)	x
+#else
+#define NDS32_EXIT_KEEP(x)
+#endif
+
 SECTIONS
 {
 	_stext_lma = TEXTADDR - LOAD_OFFSET;
 	. = TEXTADDR;
 	__init_begin = .;
 	HEAD_TEXT_SECTION
+	.exit.text : {
+		NDS32_EXIT_KEEP(EXIT_TEXT)
+	}
 	INIT_TEXT_SECTION(PAGE_SIZE)
 	INIT_DATA_SECTION(16)
+	.exit.data : {
+		NDS32_EXIT_KEEP(EXIT_DATA)
+	}
 	PERCPU_SECTION(L1_CACHE_BYTES)
 	__init_end = .;

--- a/arch/nios2/Kconfig.debug
+++ b/arch/nios2/Kconfig.debug
@ -3,15 +3,6 @@
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y

-config DEBUG_STACK_USAGE
-	bool "Enable stack utilization instrumentation"
-	depends on DEBUG_KERNEL
-	help
-	  Enables the display of the minimum amount of free stack which each
-	  task has ever had available in the sysrq-T and sysrq-P debug output.
-
-	  This option will slow down process creation somewhat.
-
 config EARLY_PRINTK
 	bool "Activate early kernel debugging"
 	default y
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@ -177,7 +177,6 @@ config PPC
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_MMAP_RND_BITS
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS	if COMPAT
-	select HAVE_ARCH_PREL32_RELOCATIONS
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_CBPF_JIT			if !PPC64
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@ -358,7 +358,7 @@ static int kvmppc_mmu_book3s_64_hv_xlate(struct kvm_vcpu *vcpu, gva_t eaddr,
 	unsigned long pp, key;
 	unsigned long v, orig_v, gr;
 	__be64 *hptep;
-	int index;
+	long int index;
 	int virtmode = vcpu->arch.shregs.msr & (data ? MSR_DR : MSR_IR);

 	if (kvm_is_radix(vcpu->kvm))
--- a/arch/powerpc/kvm/book3s_64_mmu_radix.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_radix.c
@ -725,10 +725,10 @@ int kvm_unmap_radix(struct kvm *kvm, struct kvm_memory_slot *memslot,
 					      gpa, shift);
 		kvmppc_radix_tlbie_page(kvm, gpa, shift);
 		if ((old & _PAGE_DIRTY) && memslot->dirty_bitmap) {
-			unsigned long npages = 1;
+			unsigned long psize = PAGE_SIZE;
 			if (shift)
-				npages = 1ul << (shift - PAGE_SHIFT);
-			kvmppc_update_dirty_map(memslot, gfn, npages);
+				psize = 1ul << shift;
+			kvmppc_update_dirty_map(memslot, gfn, psize);
 		}
 	}
 	return 0;				
--- a/Show More
+++ b/Show More