mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-26 13:44:15 +08:00
[ARM] 2890/1: OMAP 1/4: Update omap1 specific files, take 2
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Convert more drivers to register resources in board-*.c to take advantage of the driver model by David Brownell and Ladislav Michl - Use set_irq_type() for GPIO interrupts instead of omap_set_gpio_edge_ctrl() by David Brownell - Add minimal support for handling optional add-on boards, such as OSK Mistral board with LCD and keypad, by David Brownell - Minimal support for loading functions to SRAM by Tony Lindgren - Wake up from serial port by muxing RX lines temporarily into GPIO interrupts by Tony Lindgren - 32KHz sched_clock by Tony Lindgren and Juha Yrjola Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Tony Lindgren
Russell King
parent
d7b6b35894
commit
7c38cf021b
@ -47,6 +47,14 @@ config MACH_OMAP_OSK
|
||||
TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
|
||||
if you have such a board.
|
||||
|
||||
config OMAP_OSK_MISTRAL
|
||||
bool "Mistral QVGA board Support"
|
||||
depends on MACH_OMAP_OSK
|
||||
help
|
||||
The OSK supports an optional add-on board with a Quarter-VGA
|
||||
touchscreen, PDA-ish buttons, a resume button, bicolor LED,
|
||||
and camera connector. Say Y here if you have this board.
|
||||
|
||||
config MACH_OMAP_PERSEUS2
|
||||
bool "TI Perseus2"
|
||||
depends on ARCH_OMAP1 && ARCH_OMAP730
|
||||
|
||||
@ -3,7 +3,7 @@
|
||||
#
|
||||
|
||||
# Common support
|
||||
obj-y := io.o id.o irq.o time.o serial.o
|
||||
obj-y := io.o id.o irq.o time.o serial.o devices.o
|
||||
led-y := leds.o
|
||||
|
||||
# Specific board support
|
||||
@ -23,6 +23,7 @@ endif
|
||||
|
||||
# LEDs support
|
||||
led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o
|
||||
led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o
|
||||
led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o
|
||||
led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o
|
||||
led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o
|
||||
|
||||
@ -48,19 +48,43 @@ static struct omap_usb_config generic1510_usb_config __initdata = {
|
||||
|
||||
#if defined(CONFIG_ARCH_OMAP16XX)
|
||||
static struct omap_usb_config generic1610_usb_config __initdata = {
|
||||
#ifdef CONFIG_USB_OTG
|
||||
.otg = 1,
|
||||
#endif
|
||||
.register_host = 1,
|
||||
.register_dev = 1,
|
||||
.hmc_mode = 16,
|
||||
.pins[0] = 6,
|
||||
};
|
||||
|
||||
static struct omap_mmc_config generic_mmc_config __initdata = {
|
||||
.mmc [0] = {
|
||||
.enabled = 0,
|
||||
.wire4 = 0,
|
||||
.wp_pin = -1,
|
||||
.power_pin = -1,
|
||||
.switch_pin = -1,
|
||||
},
|
||||
.mmc [1] = {
|
||||
.enabled = 0,
|
||||
.wire4 = 0,
|
||||
.wp_pin = -1,
|
||||
.power_pin = -1,
|
||||
.switch_pin = -1,
|
||||
},
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
static struct omap_board_config_kernel generic_config[] = {
|
||||
{ OMAP_TAG_USB, NULL },
|
||||
{ OMAP_TAG_MMC, &generic_mmc_config },
|
||||
};
|
||||
|
||||
static void __init omap_generic_init(void)
|
||||
{
|
||||
const struct omap_uart_config *uart_conf;
|
||||
|
||||
/*
|
||||
* Make sure the serial ports are muxed on at this point.
|
||||
* You have to mux them off in device drivers later on
|
||||
@ -76,6 +100,18 @@ static void __init omap_generic_init(void)
|
||||
generic_config[0].data = &generic1610_usb_config;
|
||||
}
|
||||
#endif
|
||||
|
||||
uart_conf = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
|
||||
if (uart_conf != NULL) {
|
||||
unsigned int enabled_ports, i;
|
||||
|
||||
enabled_ports = uart_conf->enabled_uarts;
|
||||
for (i = 0; i < 3; i++) {
|
||||
if (!(enabled_ports & (1 << i)))
|
||||
generic_serial_ports[i] = 0;
|
||||
}
|
||||
}
|
||||
|
||||
omap_board_config = generic_config;
|
||||
omap_board_config_size = ARRAY_SIZE(generic_config);
|
||||
omap_serial_init(generic_serial_ports);
|
||||
@ -83,7 +119,7 @@ static void __init omap_generic_init(void)
|
||||
|
||||
static void __init omap_generic_map_io(void)
|
||||
{
|
||||
omap_map_common_io()
|
||||
omap_map_common_io();
|
||||
}
|
||||
|
||||
MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
|
||||
|
||||
@ -33,6 +33,7 @@
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/mux.h>
|
||||
#include <asm/arch/tc.h>
|
||||
#include <asm/arch/usb.h>
|
||||
#include <asm/arch/common.h>
|
||||
@ -80,8 +81,7 @@ static struct flash_platform_data h2_flash_data = {
|
||||
};
|
||||
|
||||
static struct resource h2_flash_resource = {
|
||||
.start = OMAP_CS2B_PHYS,
|
||||
.end = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1,
|
||||
/* This is on CS3, wherever it's mapped */
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
@ -126,10 +126,9 @@ static void __init h2_init_smc91x(void)
|
||||
printk("Error requesting gpio 0 for smc91x irq\n");
|
||||
return;
|
||||
}
|
||||
omap_set_gpio_edge_ctrl(0, OMAP_GPIO_FALLING_EDGE);
|
||||
}
|
||||
|
||||
void h2_init_irq(void)
|
||||
static void __init h2_init_irq(void)
|
||||
{
|
||||
omap_init_irq();
|
||||
omap_gpio_init();
|
||||
@ -152,9 +151,13 @@ static struct omap_usb_config h2_usb_config __initdata = {
|
||||
};
|
||||
|
||||
static struct omap_mmc_config h2_mmc_config __initdata = {
|
||||
.mmc_blocks = 1,
|
||||
.mmc1_power_pin = -1, /* tps65010 gpio3 */
|
||||
.mmc1_switch_pin = OMAP_MPUIO(1),
|
||||
.mmc [0] = {
|
||||
.enabled = 1,
|
||||
.wire4 = 1,
|
||||
.wp_pin = OMAP_MPUIO(3),
|
||||
.power_pin = -1, /* tps65010 gpio3 */
|
||||
.switch_pin = OMAP_MPUIO(1),
|
||||
},
|
||||
};
|
||||
|
||||
static struct omap_board_config_kernel h2_config[] = {
|
||||
@ -164,6 +167,16 @@ static struct omap_board_config_kernel h2_config[] = {
|
||||
|
||||
static void __init h2_init(void)
|
||||
{
|
||||
/* NOTE: revC boards support NAND-boot, which can put NOR on CS2B
|
||||
* and NAND (either 16bit or 8bit) on CS3.
|
||||
*/
|
||||
h2_flash_resource.end = h2_flash_resource.start = omap_cs3_phys();
|
||||
h2_flash_resource.end += SZ_32M - 1;
|
||||
|
||||
/* MMC: card detect and WP */
|
||||
// omap_cfg_reg(U19_ARMIO1); /* CD */
|
||||
omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */
|
||||
|
||||
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
|
||||
omap_board_config = h2_config;
|
||||
omap_board_config_size = ARRAY_SIZE(h2_config);
|
||||
|
||||
@ -82,8 +82,7 @@ static struct flash_platform_data h3_flash_data = {
|
||||
};
|
||||
|
||||
static struct resource h3_flash_resource = {
|
||||
.start = OMAP_CS2B_PHYS,
|
||||
.end = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1,
|
||||
/* This is on CS3, wherever it's mapped */
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
@ -161,13 +160,26 @@ static struct omap_usb_config h3_usb_config __initdata = {
|
||||
.pins[1] = 3,
|
||||
};
|
||||
|
||||
static struct omap_mmc_config h3_mmc_config __initdata = {
|
||||
.mmc[0] = {
|
||||
.enabled = 1,
|
||||
.power_pin = -1, /* tps65010 GPIO4 */
|
||||
.switch_pin = OMAP_MPUIO(1),
|
||||
},
|
||||
};
|
||||
|
||||
static struct omap_board_config_kernel h3_config[] = {
|
||||
{ OMAP_TAG_USB, &h3_usb_config },
|
||||
{ OMAP_TAG_MMC, &h3_mmc_config },
|
||||
};
|
||||
|
||||
static void __init h3_init(void)
|
||||
{
|
||||
h3_flash_resource.end = h3_flash_resource.start = omap_cs3_phys();
|
||||
h3_flash_resource.end += OMAP_CS3_SIZE - 1;
|
||||
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
|
||||
omap_board_config = h3_config;
|
||||
omap_board_config_size = ARRAY_SIZE(h3_config);
|
||||
}
|
||||
|
||||
static void __init h3_init_smc91x(void)
|
||||
@ -177,7 +189,6 @@ static void __init h3_init_smc91x(void)
|
||||
printk("Error requesting gpio 40 for smc91x irq\n");
|
||||
return;
|
||||
}
|
||||
omap_set_gpio_edge_ctrl(40, OMAP_GPIO_FALLING_EDGE);
|
||||
}
|
||||
|
||||
void h3_init_irq(void)
|
||||
|
||||
@ -29,6 +29,7 @@
|
||||
#include <asm/mach/flash.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include <asm/arch/mux.h>
|
||||
#include <asm/arch/fpga.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/tc.h>
|
||||
@ -173,7 +174,6 @@ static void __init innovator_init_smc91x(void)
|
||||
printk("Error requesting gpio 0 for smc91x irq\n");
|
||||
return;
|
||||
}
|
||||
omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE);
|
||||
}
|
||||
}
|
||||
|
||||
@ -220,8 +220,19 @@ static struct omap_usb_config h2_usb_config __initdata = {
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct omap_mmc_config innovator_mmc_config __initdata = {
|
||||
.mmc [0] = {
|
||||
.enabled = 1,
|
||||
.wire4 = 1,
|
||||
.wp_pin = OMAP_MPUIO(3),
|
||||
.power_pin = -1, /* FPGA F3 UIO42 */
|
||||
.switch_pin = -1, /* FPGA F4 UIO43 */
|
||||
},
|
||||
};
|
||||
|
||||
static struct omap_board_config_kernel innovator_config[] = {
|
||||
{ OMAP_TAG_USB, NULL },
|
||||
{ OMAP_TAG_MMC, &innovator_mmc_config },
|
||||
};
|
||||
|
||||
static void __init innovator_init(void)
|
||||
|
||||
@ -75,16 +75,15 @@ static void __init netstar_init(void)
|
||||
mdelay(50); /* 50ms until PHY ready */
|
||||
/* smc91x interrupt pin */
|
||||
omap_request_gpio(8);
|
||||
omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE);
|
||||
|
||||
omap_request_gpio(12);
|
||||
omap_request_gpio(13);
|
||||
omap_request_gpio(14);
|
||||
omap_request_gpio(15);
|
||||
omap_set_gpio_edge_ctrl(12, OMAP_GPIO_FALLING_EDGE);
|
||||
omap_set_gpio_edge_ctrl(13, OMAP_GPIO_FALLING_EDGE);
|
||||
omap_set_gpio_edge_ctrl(14, OMAP_GPIO_FALLING_EDGE);
|
||||
omap_set_gpio_edge_ctrl(15, OMAP_GPIO_FALLING_EDGE);
|
||||
set_irq_type(OMAP_GPIO_IRQ(12), IRQT_FALLING);
|
||||
set_irq_type(OMAP_GPIO_IRQ(13), IRQT_FALLING);
|
||||
set_irq_type(OMAP_GPIO_IRQ(14), IRQT_FALLING);
|
||||
set_irq_type(OMAP_GPIO_IRQ(15), IRQT_FALLING);
|
||||
|
||||
platform_add_devices(netstar_devices, ARRAY_SIZE(netstar_devices));
|
||||
|
||||
|
||||
@ -29,11 +29,16 @@
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/interrupt.h>
|
||||
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/flash.h>
|
||||
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/usb.h>
|
||||
@ -41,12 +46,56 @@
|
||||
#include <asm/arch/tc.h>
|
||||
#include <asm/arch/common.h>
|
||||
|
||||
static struct map_desc osk5912_io_desc[] __initdata = {
|
||||
{ OMAP_OSK_NOR_FLASH_BASE, OMAP_OSK_NOR_FLASH_START, OMAP_OSK_NOR_FLASH_SIZE,
|
||||
MT_DEVICE },
|
||||
static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0};
|
||||
|
||||
static struct mtd_partition osk_partitions[] = {
|
||||
/* bootloader (U-Boot, etc) in first sector */
|
||||
{
|
||||
.name = "bootloader",
|
||||
.offset = 0,
|
||||
.size = SZ_128K,
|
||||
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
||||
},
|
||||
/* bootloader params in the next sector */
|
||||
{
|
||||
.name = "params",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = SZ_128K,
|
||||
.mask_flags = 0,
|
||||
}, {
|
||||
.name = "kernel",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = SZ_2M,
|
||||
.mask_flags = 0
|
||||
}, {
|
||||
.name = "filesystem",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
.mask_flags = 0
|
||||
}
|
||||
};
|
||||
|
||||
static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0};
|
||||
static struct flash_platform_data osk_flash_data = {
|
||||
.map_name = "cfi_probe",
|
||||
.width = 2,
|
||||
.parts = osk_partitions,
|
||||
.nr_parts = ARRAY_SIZE(osk_partitions),
|
||||
};
|
||||
|
||||
static struct resource osk_flash_resource = {
|
||||
/* this is on CS3, wherever it's mapped */
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct platform_device osk5912_flash_device = {
|
||||
.name = "omapflash",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &osk_flash_data,
|
||||
},
|
||||
.num_resources = 1,
|
||||
.resource = &osk_flash_resource,
|
||||
};
|
||||
|
||||
static struct resource osk5912_smc91x_resources[] = {
|
||||
[0] = {
|
||||
@ -86,9 +135,16 @@ static struct platform_device osk5912_cf_device = {
|
||||
.resource = osk5912_cf_resources,
|
||||
};
|
||||
|
||||
static struct platform_device osk5912_mcbsp1_device = {
|
||||
.name = "omap_mcbsp",
|
||||
.id = 1,
|
||||
};
|
||||
|
||||
static struct platform_device *osk5912_devices[] __initdata = {
|
||||
&osk5912_flash_device,
|
||||
&osk5912_smc91x_device,
|
||||
&osk5912_cf_device,
|
||||
&osk5912_mcbsp1_device,
|
||||
};
|
||||
|
||||
static void __init osk_init_smc91x(void)
|
||||
@ -97,7 +153,6 @@ static void __init osk_init_smc91x(void)
|
||||
printk("Error requesting gpio 0 for smc91x irq\n");
|
||||
return;
|
||||
}
|
||||
omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE);
|
||||
|
||||
/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
|
||||
EMIFS_CCS(1) |= 0x2;
|
||||
@ -110,11 +165,11 @@ static void __init osk_init_cf(void)
|
||||
printk("Error requesting gpio 62 for CF irq\n");
|
||||
return;
|
||||
}
|
||||
/* it's really active-low */
|
||||
omap_set_gpio_edge_ctrl(62, OMAP_GPIO_FALLING_EDGE);
|
||||
/* the CF I/O IRQ is really active-low */
|
||||
set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING);
|
||||
}
|
||||
|
||||
void osk_init_irq(void)
|
||||
static void __init osk_init_irq(void)
|
||||
{
|
||||
omap_init_irq();
|
||||
omap_gpio_init();
|
||||
@ -142,18 +197,69 @@ static struct omap_board_config_kernel osk_config[] = {
|
||||
{ OMAP_TAG_USB, &osk_usb_config },
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OMAP_OSK_MISTRAL
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static irqreturn_t
|
||||
osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs)
|
||||
{
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
#endif
|
||||
|
||||
static void __init osk_mistral_init(void)
|
||||
{
|
||||
/* FIXME here's where to feed in framebuffer, touchpad, and
|
||||
* keyboard setup ... not in the drivers for those devices!
|
||||
*
|
||||
* NOTE: we could actually tell if there's a Mistral board
|
||||
* attached, e.g. by trying to read something from the ads7846.
|
||||
* But this is too early for that...
|
||||
*/
|
||||
|
||||
/* the sideways button (SW1) is for use as a "wakeup" button */
|
||||
omap_cfg_reg(N15_1610_MPUIO2);
|
||||
if (omap_request_gpio(OMAP_MPUIO(2)) == 0) {
|
||||
int ret = 0;
|
||||
omap_set_gpio_direction(OMAP_MPUIO(2), 1);
|
||||
set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING);
|
||||
#ifdef CONFIG_PM
|
||||
/* share the IRQ in case someone wants to use the
|
||||
* button for more than wakeup from system sleep.
|
||||
*/
|
||||
ret = request_irq(OMAP_GPIO_IRQ(OMAP_MPUIO(2)),
|
||||
&osk_mistral_wake_interrupt,
|
||||
SA_SHIRQ, "mistral_wakeup",
|
||||
&osk_mistral_wake_interrupt);
|
||||
if (ret != 0) {
|
||||
omap_free_gpio(OMAP_MPUIO(2));
|
||||
printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
|
||||
ret);
|
||||
} else
|
||||
enable_irq_wake(OMAP_GPIO_IRQ(OMAP_MPUIO(2)));
|
||||
#endif
|
||||
} else
|
||||
printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
|
||||
}
|
||||
#else
|
||||
static void __init osk_mistral_init(void) { }
|
||||
#endif
|
||||
|
||||
static void __init osk_init(void)
|
||||
{
|
||||
osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
|
||||
osk_flash_resource.end += SZ_32M - 1;
|
||||
platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
|
||||
omap_board_config = osk_config;
|
||||
omap_board_config_size = ARRAY_SIZE(osk_config);
|
||||
USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
|
||||
|
||||
osk_mistral_init();
|
||||
}
|
||||
|
||||
static void __init osk_map_io(void)
|
||||
{
|
||||
omap_map_common_io();
|
||||
iotable_init(osk5912_io_desc, ARRAY_SIZE(osk5912_io_desc));
|
||||
omap_serial_init(osk_serial_ports);
|
||||
}
|
||||
|
||||
|
||||
@ -24,6 +24,7 @@
|
||||
#include <asm/mach/flash.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include <asm/arch/tc.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/mux.h>
|
||||
#include <asm/arch/fpga.h>
|
||||
@ -83,8 +84,8 @@ static struct flash_platform_data p2_flash_data = {
|
||||
};
|
||||
|
||||
static struct resource p2_flash_resource = {
|
||||
.start = OMAP_FLASH_0_START,
|
||||
.end = OMAP_FLASH_0_START + OMAP_FLASH_0_SIZE - 1,
|
||||
.start = OMAP_CS0_PHYS,
|
||||
.end = OMAP_CS0_PHYS + SZ_32M - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
|
||||
@ -25,13 +25,14 @@
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/flash.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/tc.h>
|
||||
#include <asm/arch/mux.h>
|
||||
#include <asm/arch/usb.h>
|
||||
#include <asm/arch/common.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/mux.h>
|
||||
#include <asm/arch/tc.h>
|
||||
#include <asm/arch/usb.h>
|
||||
|
||||
extern void omap_init_time(void);
|
||||
extern int omap_gpio_init(void);
|
||||
@ -86,6 +87,27 @@ static int __init ext_uart_init(void)
|
||||
}
|
||||
arch_initcall(ext_uart_init);
|
||||
|
||||
static struct flash_platform_data voiceblue_flash_data = {
|
||||
.map_name = "cfi_probe",
|
||||
.width = 2,
|
||||
};
|
||||
|
||||
static struct resource voiceblue_flash_resource = {
|
||||
.start = OMAP_CS0_PHYS,
|
||||
.end = OMAP_CS0_PHYS + SZ_32M - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct platform_device voiceblue_flash_device = {
|
||||
.name = "omapflash",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &voiceblue_flash_data,
|
||||
},
|
||||
.num_resources = 1,
|
||||
.resource = &voiceblue_flash_resource,
|
||||
};
|
||||
|
||||
static struct resource voiceblue_smc91x_resources[] = {
|
||||
[0] = {
|
||||
.start = OMAP_CS2_PHYS + 0x300,
|
||||
@ -107,6 +129,7 @@ static struct platform_device voiceblue_smc91x_device = {
|
||||
};
|
||||
|
||||
static struct platform_device *voiceblue_devices[] __initdata = {
|
||||
&voiceblue_flash_device,
|
||||
&voiceblue_smc91x_device,
|
||||
};
|
||||
|
||||
@ -119,8 +142,17 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
|
||||
.pins[2] = 6,
|
||||
};
|
||||
|
||||
static struct omap_mmc_config voiceblue_mmc_config __initdata = {
|
||||
.mmc[0] = {
|
||||
.enabled = 1,
|
||||
.power_pin = 2,
|
||||
.switch_pin = -1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct omap_board_config_kernel voiceblue_config[] = {
|
||||
{ OMAP_TAG_USB, &voiceblue_usb_config },
|
||||
{ OMAP_TAG_MMC, &voiceblue_mmc_config },
|
||||
};
|
||||
|
||||
static void __init voiceblue_init_irq(void)
|
||||
@ -131,9 +163,6 @@ static void __init voiceblue_init_irq(void)
|
||||
|
||||
static void __init voiceblue_init(void)
|
||||
{
|
||||
/* There is a good chance board is going up, so enable Power LED
|
||||
* (it is connected through invertor) */
|
||||
omap_writeb(0x00, OMAP_LPG1_LCR);
|
||||
/* Watchdog */
|
||||
omap_request_gpio(0);
|
||||
/* smc91x reset */
|
||||
@ -145,7 +174,6 @@ static void __init voiceblue_init(void)
|
||||
mdelay(50); /* 50ms until PHY ready */
|
||||
/* smc91x interrupt pin */
|
||||
omap_request_gpio(8);
|
||||
omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE);
|
||||
/* 16C554 reset*/
|
||||
omap_request_gpio(6);
|
||||
omap_set_gpio_direction(6, 0);
|
||||
@ -155,14 +183,19 @@ static void __init voiceblue_init(void)
|
||||
omap_request_gpio(13);
|
||||
omap_request_gpio(14);
|
||||
omap_request_gpio(15);
|
||||
omap_set_gpio_edge_ctrl(12, OMAP_GPIO_RISING_EDGE);
|
||||
omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE);
|
||||
omap_set_gpio_edge_ctrl(14, OMAP_GPIO_RISING_EDGE);
|
||||
omap_set_gpio_edge_ctrl(15, OMAP_GPIO_RISING_EDGE);
|
||||
set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING);
|
||||
set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
|
||||
set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING);
|
||||
set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING);
|
||||
|
||||
platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
|
||||
omap_board_config = voiceblue_config;
|
||||
omap_board_config_size = ARRAY_SIZE(voiceblue_config);
|
||||
|
||||
/* There is a good chance board is going up, so enable power LED
|
||||
* (it is connected through invertor) */
|
||||
omap_writeb(0x00, OMAP_LPG1_LCR);
|
||||
omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
|
||||
}
|
||||
|
||||
static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
|
||||
@ -184,9 +217,9 @@ static int panic_event(struct notifier_block *this, unsigned long event,
|
||||
if (test_and_set_bit(MACHINE_PANICED, &machine_state))
|
||||
return NOTIFY_DONE;
|
||||
|
||||
/* Flash Power LED
|
||||
* (TODO: Enable clock right way (enabled in bootloader already)) */
|
||||
/* Flash power LED */
|
||||
omap_writeb(0x78, OMAP_LPG1_LCR);
|
||||
omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */
|
||||
|
||||
return NOTIFY_DONE;
|
||||
}
|
||||
@ -195,15 +228,14 @@ static struct notifier_block panic_block = {
|
||||
.notifier_call = panic_event,
|
||||
};
|
||||
|
||||
static int __init setup_notifier(void)
|
||||
static int __init voiceblue_setup(void)
|
||||
{
|
||||
/* Setup panic notifier */
|
||||
notifier_chain_register(&panic_notifier_list, &panic_block);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
postcore_initcall(setup_notifier);
|
||||
postcore_initcall(voiceblue_setup);
|
||||
|
||||
static int wdt_gpio_state;
|
||||
|
||||
|
||||
351
arch/arm/mach-omap1/devices.c
Normal file
351
arch/arm/mach-omap1/devices.c
Normal file
@ -0,0 +1,351 @@
|
||||
/*
|
||||
* linux/arch/arm/mach-omap1/devices.c
|
||||
*
|
||||
* OMAP1 platform device setup/initialization
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/config.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include <asm/arch/tc.h>
|
||||
#include <asm/arch/board.h>
|
||||
#include <asm/arch/mux.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
|
||||
|
||||
static void omap_nop_release(struct device *dev)
|
||||
{
|
||||
/* Nothing */
|
||||
}
|
||||
|
||||
/*-------------------------------------------------------------------------*/
|
||||
|
||||
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
|
||||
|
||||
#define OMAP_I2C_BASE 0xfffb3800
|
||||
|
||||
static struct resource i2c_resources[] = {
|
||||
{
|
||||
.start = OMAP_I2C_BASE,
|
||||
.end = OMAP_I2C_BASE + 0x3f,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
{
|
||||
.start = INT_I2C,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
/* DMA not used; works around erratum writing to non-empty i2c fifo */
|
||||
|
||||
static struct platform_device omap_i2c_device = {
|
||||
.name = "i2c_omap",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.release = omap_nop_release,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(i2c_resources),
|
||||
.resource = i2c_resources,
|
||||
};
|
||||
|
||||
static void omap_init_i2c(void)
|
||||
{
|
||||
/* FIXME define and use a boot tag, in case of boards that
|
||||
* either don't wire up I2C, or chips that mux it differently...
|
||||
* it can include clocking and address info, maybe more.
|
||||
*/
|
||||
omap_cfg_reg(I2C_SCL);
|
||||
omap_cfg_reg(I2C_SDA);
|
||||
|
||||
(void) platform_device_register(&omap_i2c_device);
|
||||
}
|
||||
#else
|
||||
static inline void omap_init_i2c(void) {}
|
||||
#endif
|
||||
|
||||
/*-------------------------------------------------------------------------*/
|
||||
|
||||
#if defined(CONFIG_OMAP1610_IR) || defined(CONFIG_OMAP161O_IR_MODULE)
|
||||
|
||||
static u64 irda_dmamask = 0xffffffff;
|
||||
|
||||
static struct platform_device omap1610ir_device = {
|
||||
.name = "omap1610-ir",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.release = omap_nop_release,
|
||||
.dma_mask = &irda_dmamask,
|
||||
},
|
||||
};
|
||||
|
||||
static void omap_init_irda(void)
|
||||
{
|
||||
/* FIXME define and use a boot tag, members something like:
|
||||
* u8 uart; // uart1, or uart3
|
||||
* ... but driver only handles uart3 for now
|
||||
* s16 fir_sel; // gpio for SIR vs FIR
|
||||
* ... may prefer a callback for SIR/MIR/FIR mode select;
|
||||
* while h2 uses a GPIO, H3 uses a gpio expander
|
||||
*/
|
||||
if (machine_is_omap_h2()
|
||||
|| machine_is_omap_h3())
|
||||
(void) platform_device_register(&omap1610ir_device);
|
||||
}
|
||||
#else
|
||||
static inline void omap_init_irda(void) {}
|
||||
#endif
|
||||
|
||||
/*-------------------------------------------------------------------------*/
|
||||
|
||||
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
|
||||
|
||||
#define OMAP_MMC1_BASE 0xfffb7800
|
||||
#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */
|
||||
|
||||
static struct omap_mmc_conf mmc1_conf;
|
||||
|
||||
static u64 mmc1_dmamask = 0xffffffff;
|
||||
|
||||
static struct resource mmc1_resources[] = {
|
||||
{
|
||||
.start = IO_ADDRESS(OMAP_MMC1_BASE),
|
||||
.end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
{
|
||||
.start = INT_MMC,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device mmc_omap_device1 = {
|
||||
.name = "mmci-omap",
|
||||
.id = 1,
|
||||
.dev = {
|
||||
.release = omap_nop_release,
|
||||
.dma_mask = &mmc1_dmamask,
|
||||
.platform_data = &mmc1_conf,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(mmc1_resources),
|
||||
.resource = mmc1_resources,
|
||||
};
|
||||
|
||||
#ifdef CONFIG_ARCH_OMAP16XX
|
||||
|
||||
static struct omap_mmc_conf mmc2_conf;
|
||||
|
||||
static u64 mmc2_dmamask = 0xffffffff;
|
||||
|
||||
static struct resource mmc2_resources[] = {
|
||||
{
|
||||
.start = IO_ADDRESS(OMAP_MMC2_BASE),
|
||||
.end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
{
|
||||
.start = INT_1610_MMC2,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device mmc_omap_device2 = {
|
||||
.name = "mmci-omap",
|
||||
.id = 2,
|
||||
.dev = {
|
||||
.release = omap_nop_release,
|
||||
.dma_mask = &mmc2_dmamask,
|
||||
.platform_data = &mmc2_conf,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(mmc2_resources),
|
||||
.resource = mmc2_resources,
|
||||
};
|
||||
#endif
|
||||
|
||||
static void __init omap_init_mmc(void)
|
||||
{
|
||||
const struct omap_mmc_config *mmc_conf;
|
||||
const struct omap_mmc_conf *mmc;
|
||||
|
||||
/* NOTE: assumes MMC was never (wrongly) enabled */
|
||||
mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
|
||||
if (!mmc_conf)
|
||||
return;
|
||||
|
||||
/* block 1 is always available and has just one pinout option */
|
||||
mmc = &mmc_conf->mmc[0];
|
||||
if (mmc->enabled) {
|
||||
omap_cfg_reg(MMC_CMD);
|
||||
omap_cfg_reg(MMC_CLK);
|
||||
omap_cfg_reg(MMC_DAT0);
|
||||
if (cpu_is_omap1710()) {
|
||||
omap_cfg_reg(M15_1710_MMC_CLKI);
|
||||
omap_cfg_reg(P19_1710_MMC_CMDDIR);
|
||||
omap_cfg_reg(P20_1710_MMC_DATDIR0);
|
||||
}
|
||||
if (mmc->wire4) {
|
||||
omap_cfg_reg(MMC_DAT1);
|
||||
/* NOTE: DAT2 can be on W10 (here) or M15 */
|
||||
if (!mmc->nomux)
|
||||
omap_cfg_reg(MMC_DAT2);
|
||||
omap_cfg_reg(MMC_DAT3);
|
||||
}
|
||||
mmc1_conf = *mmc;
|
||||
(void) platform_device_register(&mmc_omap_device1);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_ARCH_OMAP16XX
|
||||
/* block 2 is on newer chips, and has many pinout options */
|
||||
mmc = &mmc_conf->mmc[1];
|
||||
if (mmc->enabled) {
|
||||
if (!mmc->nomux) {
|
||||
omap_cfg_reg(Y8_1610_MMC2_CMD);
|
||||
omap_cfg_reg(Y10_1610_MMC2_CLK);
|
||||
omap_cfg_reg(R18_1610_MMC2_CLKIN);
|
||||
omap_cfg_reg(W8_1610_MMC2_DAT0);
|
||||
if (mmc->wire4) {
|
||||
omap_cfg_reg(V8_1610_MMC2_DAT1);
|
||||
omap_cfg_reg(W15_1610_MMC2_DAT2);
|
||||
omap_cfg_reg(R10_1610_MMC2_DAT3);
|
||||
}
|
||||
|
||||
/* These are needed for the level shifter */
|
||||
omap_cfg_reg(V9_1610_MMC2_CMDDIR);
|
||||
omap_cfg_reg(V5_1610_MMC2_DATDIR0);
|
||||
omap_cfg_reg(W19_1610_MMC2_DATDIR1);
|
||||
}
|
||||
|
||||
/* Feedback clock must be set on OMAP-1710 MMC2 */
|
||||
if (cpu_is_omap1710())
|
||||
omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
|
||||
MOD_CONF_CTRL_1);
|
||||
mmc2_conf = *mmc;
|
||||
(void) platform_device_register(&mmc_omap_device2);
|
||||
}
|
||||
#endif
|
||||
return;
|
||||
}
|
||||
#else
|
||||
static inline void omap_init_mmc(void) {}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_OMAP_RTC) || defined(CONFIG_OMAP_RTC)
|
||||
|
||||
#define OMAP_RTC_BASE 0xfffb4800
|
||||
|
||||
static struct resource rtc_resources[] = {
|
||||
{
|
||||
.start = OMAP_RTC_BASE,
|
||||
.end = OMAP_RTC_BASE + 0x5f,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
{
|
||||
.start = INT_RTC_TIMER,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
{
|
||||
.start = INT_RTC_ALARM,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device omap_rtc_device = {
|
||||
.name = "omap_rtc",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.release = omap_nop_release,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(rtc_resources),
|
||||
.resource = rtc_resources,
|
||||
};
|
||||
|
||||
static void omap_init_rtc(void)
|
||||
{
|
||||
(void) platform_device_register(&omap_rtc_device);
|
||||
}
|
||||
#else
|
||||
static inline void omap_init_rtc(void) {}
|
||||
#endif
|
||||
|
||||
/*-------------------------------------------------------------------------*/
|
||||
|
||||
#if defined(CONFIG_OMAP16XX_WATCHDOG) || defined(CONFIG_OMAP16XX_WATCHDOG_MODULE)
|
||||
|
||||
#define OMAP_WDT_BASE 0xfffeb000
|
||||
|
||||
static struct resource wdt_resources[] = {
|
||||
{
|
||||
.start = OMAP_WDT_BASE,
|
||||
.end = OMAP_WDT_BASE + 0x4f,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device omap_wdt_device = {
|
||||
.name = "omap1610_wdt",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.release = omap_nop_release,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(wdt_resources),
|
||||
.resource = wdt_resources,
|
||||
};
|
||||
|
||||
static void omap_init_wdt(void)
|
||||
{
|
||||
(void) platform_device_register(&omap_wdt_device);
|
||||
}
|
||||
#else
|
||||
static inline void omap_init_wdt(void) {}
|
||||
#endif
|
||||
|
||||
|
||||
/*-------------------------------------------------------------------------*/
|
||||
|
||||
/*
|
||||
* This gets called after board-specific INIT_MACHINE, and initializes most
|
||||
* on-chip peripherals accessible on this board (except for few like USB):
|
||||
*
|
||||
* (a) Does any "standard config" pin muxing needed. Board-specific
|
||||
* code will have muxed GPIO pins and done "nonstandard" setup;
|
||||
* that code could live in the boot loader.
|
||||
* (b) Populating board-specific platform_data with the data drivers
|
||||
* rely on to handle wiring variations.
|
||||
* (c) Creating platform devices as meaningful on this board and
|
||||
* with this kernel configuration.
|
||||
*
|
||||
* Claiming GPIOs, and setting their direction and initial values, is the
|
||||
* responsibility of the device drivers. So is responding to probe().
|
||||
*
|
||||
* Board-specific knowlege like creating devices or pin setup is to be
|
||||
* kept out of drivers as much as possible. In particular, pin setup
|
||||
* may be handled by the boot loader, and drivers should expect it will
|
||||
* normally have been done by the time they're probed.
|
||||
*/
|
||||
static int __init omap_init_devices(void)
|
||||
{
|
||||
/* please keep these calls, and their implementations above,
|
||||
* in alphabetical order so they're easier to sort through.
|
||||
*/
|
||||
omap_init_i2c();
|
||||
omap_init_irda();
|
||||
omap_init_mmc();
|
||||
omap_init_rtc();
|
||||
omap_init_wdt();
|
||||
|
||||
return 0;
|
||||
}
|
||||
arch_initcall(omap_init_devices);
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* linux/arch/arm/mach-omap/fpga.c
|
||||
* linux/arch/arm/mach-omap1/fpga.c
|
||||
*
|
||||
* Interrupt handler for OMAP-1510 Innovator FPGA
|
||||
*
|
||||
@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void)
|
||||
*/
|
||||
omap_request_gpio(13);
|
||||
omap_set_gpio_direction(13, 1);
|
||||
omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE);
|
||||
set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
|
||||
set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
|
||||
}
|
||||
|
||||
|
||||
@ -19,6 +19,7 @@
|
||||
|
||||
extern int clk_init(void);
|
||||
extern void omap_check_revision(void);
|
||||
extern void omap_sram_init(void);
|
||||
|
||||
/*
|
||||
* The machine specific code may provide the extra mapping besides the
|
||||
@ -32,7 +33,6 @@ static struct map_desc omap_io_desc[] __initdata = {
|
||||
static struct map_desc omap730_io_desc[] __initdata = {
|
||||
{ OMAP730_DSP_BASE, OMAP730_DSP_START, OMAP730_DSP_SIZE, MT_DEVICE },
|
||||
{ OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE },
|
||||
{ OMAP730_SRAM_BASE, OMAP730_SRAM_START, OMAP730_SRAM_SIZE, MT_DEVICE }
|
||||
};
|
||||
#endif
|
||||
|
||||
@ -40,27 +40,13 @@ static struct map_desc omap730_io_desc[] __initdata = {
|
||||
static struct map_desc omap1510_io_desc[] __initdata = {
|
||||
{ OMAP1510_DSP_BASE, OMAP1510_DSP_START, OMAP1510_DSP_SIZE, MT_DEVICE },
|
||||
{ OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE },
|
||||
{ OMAP1510_SRAM_BASE, OMAP1510_SRAM_START, OMAP1510_SRAM_SIZE, MT_DEVICE }
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ARCH_OMAP16XX)
|
||||
static struct map_desc omap1610_io_desc[] __initdata = {
|
||||
static struct map_desc omap16xx_io_desc[] __initdata = {
|
||||
{ OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE },
|
||||
{ OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
|
||||
{ OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP1610_SRAM_SIZE, MT_DEVICE }
|
||||
};
|
||||
|
||||
static struct map_desc omap5912_io_desc[] __initdata = {
|
||||
{ OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE },
|
||||
{ OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
|
||||
/*
|
||||
* The OMAP5912 has 250kByte internal SRAM. Because the mapping is baseed on page
|
||||
* size (4kByte), it seems that the last 2kByte (=0x800) of the 250kByte are not mapped.
|
||||
* Add additional 2kByte (0x800) so that the last page is mapped and the last 2kByte
|
||||
* can be used.
|
||||
*/
|
||||
{ OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP5912_SRAM_SIZE + 0x800, MT_DEVICE }
|
||||
};
|
||||
#endif
|
||||
|
||||
@ -86,14 +72,13 @@ static void __init _omap_map_io(void)
|
||||
}
|
||||
#endif
|
||||
#if defined(CONFIG_ARCH_OMAP16XX)
|
||||
if (cpu_is_omap1610() || cpu_is_omap1710()) {
|
||||
iotable_init(omap1610_io_desc, ARRAY_SIZE(omap1610_io_desc));
|
||||
}
|
||||
if (cpu_is_omap5912()) {
|
||||
iotable_init(omap5912_io_desc, ARRAY_SIZE(omap5912_io_desc));
|
||||
if (cpu_is_omap16xx()) {
|
||||
iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
|
||||
}
|
||||
#endif
|
||||
|
||||
omap_sram_init();
|
||||
|
||||
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
|
||||
* on a Posted Write in the TIPB Bridge".
|
||||
*/
|
||||
@ -108,8 +93,9 @@ static void __init _omap_map_io(void)
|
||||
/*
|
||||
* This should only get called from board specific init
|
||||
*/
|
||||
void omap_map_common_io(void)
|
||||
void __init omap_map_common_io(void)
|
||||
{
|
||||
if (!initialized)
|
||||
_omap_map_io();
|
||||
}
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* linux/arch/arm/mach-omap/irq.c
|
||||
* linux/arch/arm/mach-omap1/irq.c
|
||||
*
|
||||
* Interrupt handler for all OMAP boards
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* linux/arch/arm/mach-omap/leds-h2p2-debug.c
|
||||
* linux/arch/arm/mach-omap1/leds-h2p2-debug.c
|
||||
*
|
||||
* Copyright 2003 by Texas Instruments Incorporated
|
||||
*
|
||||
@ -13,6 +13,7 @@
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel_stat.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/version.h>
|
||||
|
||||
#include <asm/io.h>
|
||||
#include <asm/hardware.h>
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* linux/arch/arm/mach-omap/leds-innovator.c
|
||||
* linux/arch/arm/mach-omap1/leds-innovator.c
|
||||
*/
|
||||
#include <linux/config.h>
|
||||
#include <linux/init.h>
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* linux/arch/arm/mach-omap/leds-osk.c
|
||||
* linux/arch/arm/mach-omap1/leds-osk.c
|
||||
*
|
||||
* LED driver for OSK, and optionally Mistral QVGA, boards
|
||||
*/
|
||||
@ -64,7 +64,7 @@ static void tps_work(void *unused)
|
||||
|
||||
static DECLARE_WORK(work, tps_work, NULL);
|
||||
|
||||
#ifdef CONFIG_FB_OMAP
|
||||
#ifdef CONFIG_OMAP_OSK_MISTRAL
|
||||
|
||||
/* For now, all system indicators require the Mistral board, since that
|
||||
* LED can be manipulated without a task context. This LED is either red,
|
||||
@ -127,7 +127,7 @@ void osk_leds_event(led_event_t evt)
|
||||
hw_led_state = 0;
|
||||
break;
|
||||
|
||||
#ifdef CONFIG_FB_OMAP
|
||||
#ifdef CONFIG_OMAP_OSK_MISTRAL
|
||||
|
||||
case led_timer:
|
||||
hw_led_state ^= TIMER_LED;
|
||||
@ -144,7 +144,7 @@ void osk_leds_event(led_event_t evt)
|
||||
mistral_setled();
|
||||
break;
|
||||
|
||||
#endif /* CONFIG_FB_OMAP */
|
||||
#endif /* CONFIG_OMAP_OSK_MISTRAL */
|
||||
|
||||
/* "green" == tps LED1 (leftmost, normally power-good)
|
||||
* works only with DC adapter, not on battery power!
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* linux/arch/arm/mach-omap/leds.c
|
||||
* linux/arch/arm/mach-omap1/leds.c
|
||||
*
|
||||
* OMAP LEDs dispatcher
|
||||
*/
|
||||
@ -20,7 +20,9 @@ omap_leds_init(void)
|
||||
if (machine_is_omap_innovator())
|
||||
leds_event = innovator_leds_event;
|
||||
|
||||
else if (machine_is_omap_h2() || machine_is_omap_perseus2())
|
||||
else if (machine_is_omap_h2()
|
||||
|| machine_is_omap_h3()
|
||||
|| machine_is_omap_perseus2())
|
||||
leds_event = h2p2_dbg_leds_event;
|
||||
|
||||
else if (machine_is_omap_osk())
|
||||
@ -30,8 +32,12 @@ omap_leds_init(void)
|
||||
return -1;
|
||||
|
||||
if (machine_is_omap_h2()
|
||||
|| machine_is_omap_h3()
|
||||
|| machine_is_omap_perseus2()
|
||||
|| machine_is_omap_osk()) {
|
||||
#ifdef CONFIG_OMAP_OSK_MISTRAL
|
||||
|| machine_is_omap_osk()
|
||||
#endif
|
||||
) {
|
||||
|
||||
/* LED1/LED2 pins can be used as GPIO (as done here), or by
|
||||
* the LPG (works even in deep sleep!), to drive a bicolor
|
||||
|
||||
@ -24,7 +24,11 @@
|
||||
|
||||
#include <asm/arch/board.h>
|
||||
#include <asm/arch/mux.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/fpga.h>
|
||||
#ifdef CONFIG_PM
|
||||
#include <asm/arch/pm.h>
|
||||
#endif
|
||||
|
||||
static struct clk * uart1_ck = NULL;
|
||||
static struct clk * uart2_ck = NULL;
|
||||
@ -193,6 +197,86 @@ void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS])
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OMAP_SERIAL_WAKE
|
||||
|
||||
static irqreturn_t omap_serial_wake_interrupt(int irq, void *dev_id,
|
||||
struct pt_regs *regs)
|
||||
{
|
||||
/* Need to do something with serial port right after wake-up? */
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/*
|
||||
* Reroutes serial RX lines to GPIO lines for the duration of
|
||||
* sleep to allow waking up the device from serial port even
|
||||
* in deep sleep.
|
||||
*/
|
||||
void omap_serial_wake_trigger(int enable)
|
||||
{
|
||||
if (!cpu_is_omap16xx())
|
||||
return;
|
||||
|
||||
if (uart1_ck != NULL) {
|
||||
if (enable)
|
||||
omap_cfg_reg(V14_16XX_GPIO37);
|
||||
else
|
||||
omap_cfg_reg(V14_16XX_UART1_RX);
|
||||
}
|
||||
if (uart2_ck != NULL) {
|
||||
if (enable)
|
||||
omap_cfg_reg(R9_16XX_GPIO18);
|
||||
else
|
||||
omap_cfg_reg(R9_16XX_UART2_RX);
|
||||
}
|
||||
if (uart3_ck != NULL) {
|
||||
if (enable)
|
||||
omap_cfg_reg(L14_16XX_GPIO49);
|
||||
else
|
||||
omap_cfg_reg(L14_16XX_UART3_RX);
|
||||
}
|
||||
}
|
||||
|
||||
static void __init omap_serial_set_port_wakeup(int gpio_nr)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = omap_request_gpio(gpio_nr);
|
||||
if (ret < 0) {
|
||||
printk(KERN_ERR "Could not request UART wake GPIO: %i\n",
|
||||
gpio_nr);
|
||||
return;
|
||||
}
|
||||
omap_set_gpio_direction(gpio_nr, 1);
|
||||
set_irq_type(OMAP_GPIO_IRQ(gpio_nr), IRQT_RISING);
|
||||
ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt,
|
||||
0, "serial wakeup", NULL);
|
||||
if (ret) {
|
||||
omap_free_gpio(gpio_nr);
|
||||
printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n",
|
||||
gpio_nr);
|
||||
return;
|
||||
}
|
||||
enable_irq_wake(OMAP_GPIO_IRQ(gpio_nr));
|
||||
}
|
||||
|
||||
static int __init omap_serial_wakeup_init(void)
|
||||
{
|
||||
if (!cpu_is_omap16xx())
|
||||
return 0;
|
||||
|
||||
if (uart1_ck != NULL)
|
||||
omap_serial_set_port_wakeup(37);
|
||||
if (uart2_ck != NULL)
|
||||
omap_serial_set_port_wakeup(18);
|
||||
if (uart3_ck != NULL)
|
||||
omap_serial_set_port_wakeup(49);
|
||||
|
||||
return 0;
|
||||
}
|
||||
late_initcall(omap_serial_wakeup_init);
|
||||
|
||||
#endif /* CONFIG_OMAP_SERIAL_WAKE */
|
||||
|
||||
static int __init omap_init(void)
|
||||
{
|
||||
return platform_device_register(&serial_device);
|
||||
|
||||
@ -247,13 +247,6 @@ unsigned long long sched_clock(void)
|
||||
#define OMAP_32K_TIMER_TCR 0x04
|
||||
|
||||
#define OMAP_32K_TICKS_PER_HZ (32768 / HZ)
|
||||
#if (32768 % HZ) != 0
|
||||
/* We cannot ignore modulo.
|
||||
* Potential error can be as high as several percent.
|
||||
*/
|
||||
#define OMAP_32K_TICK_MODULO (32768 % HZ)
|
||||
static unsigned modulo_count = 0; /* Counts 1/HZ units */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1
|
||||
@ -296,13 +289,22 @@ static inline void omap_32k_timer_stop(void)
|
||||
}
|
||||
|
||||
/*
|
||||
* Rounds down to nearest usec
|
||||
* Rounds down to nearest usec. Note that this will overflow for larger values.
|
||||
*/
|
||||
static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k)
|
||||
{
|
||||
return (ticks_32k * 5*5*5*5*5*5) >> 9;
|
||||
}
|
||||
|
||||
/*
|
||||
* Rounds down to nearest nsec.
|
||||
*/
|
||||
static inline unsigned long long
|
||||
omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
|
||||
{
|
||||
return (unsigned long long) ticks_32k * 1000 * 5*5*5*5*5*5 >> 9;
|
||||
}
|
||||
|
||||
static unsigned long omap_32k_last_tick = 0;
|
||||
|
||||
/*
|
||||
@ -314,6 +316,15 @@ static unsigned long omap_32k_timer_gettimeoffset(void)
|
||||
return omap_32k_ticks_to_usecs(now - omap_32k_last_tick);
|
||||
}
|
||||
|
||||
/*
|
||||
* Returns current time from boot in nsecs. It's OK for this to wrap
|
||||
* around for now, as it's just a relative time stamp.
|
||||
*/
|
||||
unsigned long long sched_clock(void)
|
||||
{
|
||||
return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read());
|
||||
}
|
||||
|
||||
/*
|
||||
* Timer interrupt for 32KHz timer. When dynamic tick is enabled, this
|
||||
* function is also called from other interrupts to remove latency
|
||||
@ -330,19 +341,6 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
|
||||
now = omap_32k_sync_timer_read();
|
||||
|
||||
while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) {
|
||||
#ifdef OMAP_32K_TICK_MODULO
|
||||
/* Modulo addition may put omap_32k_last_tick ahead of now
|
||||
* and cause unwanted repetition of the while loop.
|
||||
*/
|
||||
if (unlikely(now - omap_32k_last_tick == ~0))
|
||||
break;
|
||||
|
||||
modulo_count += OMAP_32K_TICK_MODULO;
|
||||
if (modulo_count > HZ) {
|
||||
++omap_32k_last_tick;
|
||||
modulo_count -= HZ;
|
||||
}
|
||||
#endif
|
||||
omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ;
|
||||
timer_tick(regs);
|
||||
}
|
||||
|
||||
Loading…
Reference in New Issue
Block a user