diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index 2a68be6a1b97..0faaab24376e 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -2,6 +2,10 @@ config ALCHEMY_GPIOINT_AU1000 bool +# au1300-style GPIO/INT controller +config ALCHEMY_GPIOINT_AU1300 + bool + # select this in your board config if you don't want to use the gpio # namespace as documented in the manuals. In this case however you need # to create the necessary gpio_* functions in your board code/headers! @@ -22,38 +26,8 @@ config MIPS_MTX1 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK -config MIPS_BOSPORUS - bool "Alchemy Bosporus board" - select ALCHEMY_GPIOINT_AU1000 - select DMA_NONCOHERENT - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_EARLY_PRINTK - config MIPS_DB1000 - bool "Alchemy DB1000 board" - select ALCHEMY_GPIOINT_AU1000 - select DMA_NONCOHERENT - select HW_HAS_PCI - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_EARLY_PRINTK - -config MIPS_DB1100 - bool "Alchemy DB1100 board" - select ALCHEMY_GPIOINT_AU1000 - select DMA_NONCOHERENT - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_EARLY_PRINTK - -config MIPS_DB1200 - bool "Alchemy DB1200 board" - select ALCHEMY_GPIOINT_AU1000 - select DMA_COHERENT - select MIPS_DISABLE_OBSOLETE_IDE - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_EARLY_PRINTK - -config MIPS_DB1500 - bool "Alchemy DB1500 board" + bool "Alchemy DB1000/DB1500/DB1100 boards" select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI @@ -62,28 +36,28 @@ config MIPS_DB1500 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK -config MIPS_DB1550 - bool "Alchemy DB1550 board" +config MIPS_DB1200 + bool "Alchemy DB1200/PB1200 board" select ALCHEMY_GPIOINT_AU1000 - select HW_HAS_PCI - select DMA_NONCOHERENT + select DMA_COHERENT select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK -config MIPS_MIRAGE - bool "Alchemy Mirage board" - select DMA_NONCOHERENT - select ALCHEMY_GPIOINT_AU1000 +config MIPS_DB1300 + bool "NetLogic DB1300 board" + select ALCHEMY_GPIOINT_AU1300 + select DMA_COHERENT + select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK -config MIPS_PB1000 - bool "Alchemy PB1000 board" +config MIPS_DB1550 + bool "Alchemy DB1550 board" select ALCHEMY_GPIOINT_AU1000 - select DMA_NONCOHERENT select HW_HAS_PCI - select SWAP_IO_SPACE + select DMA_COHERENT + select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK @@ -96,14 +70,6 @@ config MIPS_PB1100 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK -config MIPS_PB1200 - bool "Alchemy PB1200 board" - select ALCHEMY_GPIOINT_AU1000 - select DMA_NONCOHERENT - select MIPS_DISABLE_OBSOLETE_IDE - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_EARLY_PRINTK - config MIPS_PB1500 bool "Alchemy PB1500 board" select ALCHEMY_GPIOINT_AU1000 diff --git a/arch/mips/alchemy/Makefile b/arch/mips/alchemy/Makefile new file mode 100644 index 000000000000..aac3b179bbc0 --- /dev/null +++ b/arch/mips/alchemy/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_MIPS_GPR) += board-gpr.o +obj-$(CONFIG_MIPS_MTX1) += board-mtx1.o +obj-$(CONFIG_MIPS_XXS1500) += board-xxs1500.o diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform index 96e9e41f1b2a..7956274de15f 100644 --- a/arch/mips/alchemy/Platform +++ b/arch/mips/alchemy/Platform @@ -4,62 +4,31 @@ platform-$(CONFIG_MIPS_ALCHEMY) += alchemy/common/ -# -# AMD Alchemy Pb1000 eval board -# -platform-$(CONFIG_MIPS_PB1000) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_PB1000) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 -load-$(CONFIG_MIPS_PB1000) += 0xffffffff80100000 - # # AMD Alchemy Pb1100 eval board # platform-$(CONFIG_MIPS_PB1100) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_PB1100) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1100) += 0xffffffff80100000 # # AMD Alchemy Pb1500 eval board # platform-$(CONFIG_MIPS_PB1500) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_PB1500) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1500) += 0xffffffff80100000 # # AMD Alchemy Pb1550 eval board # platform-$(CONFIG_MIPS_PB1550) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_PB1550) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000 # -# AMD Alchemy Pb1200 eval board -# -platform-$(CONFIG_MIPS_PB1200) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_PB1200) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 -load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000 - -# -# AMD Alchemy Db1000 eval board +# AMD Alchemy Db1000/Db1500/Db1100 eval boards # platform-$(CONFIG_MIPS_DB1000) += alchemy/devboards/ cflags-$(CONFIG_MIPS_DB1000) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1000) += 0xffffffff80100000 -# -# AMD Alchemy Db1100 eval board -# -platform-$(CONFIG_MIPS_DB1100) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_DB1100) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 -load-$(CONFIG_MIPS_DB1100) += 0xffffffff80100000 - -# -# AMD Alchemy Db1500 eval board -# -platform-$(CONFIG_MIPS_DB1500) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_DB1500) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 -load-$(CONFIG_MIPS_DB1500) += 0xffffffff80100000 - # # AMD Alchemy Db1550 eval board # @@ -68,42 +37,35 @@ cflags-$(CONFIG_MIPS_DB1550) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000 # -# AMD Alchemy Db1200 eval board +# AMD Alchemy Db1200/Pb1200 eval boards # platform-$(CONFIG_MIPS_DB1200) += alchemy/devboards/ cflags-$(CONFIG_MIPS_DB1200) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000 # -# AMD Alchemy Bosporus eval board +# NetLogic DBAu1300 development platform # -platform-$(CONFIG_MIPS_BOSPORUS) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_BOSPORUS) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 -load-$(CONFIG_MIPS_BOSPORUS) += 0xffffffff80100000 +platform-$(CONFIG_MIPS_DB1300) += alchemy/devboards/ +cflags-$(CONFIG_MIPS_DB1300) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 +load-$(CONFIG_MIPS_DB1300) += 0xffffffff80100000 # -# AMD Alchemy Mirage eval board +# 4G-Systems MTX-1 "MeshCube" wireless router # -platform-$(CONFIG_MIPS_MIRAGE) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_MIRAGE) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 -load-$(CONFIG_MIPS_MIRAGE) += 0xffffffff80100000 - -# -# 4G-Systems eval board -# -platform-$(CONFIG_MIPS_MTX1) += alchemy/mtx-1/ +platform-$(CONFIG_MIPS_MTX1) += alchemy/ load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000 # # MyCable eval board # -platform-$(CONFIG_MIPS_XXS1500) += alchemy/xxs1500/ +platform-$(CONFIG_MIPS_XXS1500) += alchemy/ load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000 # # Trapeze ITS GRP board # -platform-$(CONFIG_MIPS_GPR) += alchemy/gpr/ +platform-$(CONFIG_MIPS_GPR) += alchemy/ load-$(CONFIG_MIPS_GPR) += 0xffffffff80100000 # boards can specify their own in one of their include dirs. diff --git a/arch/mips/alchemy/gpr/platform.c b/arch/mips/alchemy/board-gpr.c similarity index 75% rename from arch/mips/alchemy/gpr/platform.c rename to arch/mips/alchemy/board-gpr.c index 982ce85db60d..ba3259086b9d 100644 --- a/arch/mips/alchemy/gpr/platform.c +++ b/arch/mips/alchemy/board-gpr.c @@ -1,5 +1,5 @@ /* - * GPR board platform device registration + * GPR board platform device registration (Au1550) * * Copyright (C) 2010 Wolfgang Grandegger * @@ -18,16 +18,89 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include #include +#include +#include #include +#include #include #include #include #include #include #include - +#include +#include #include +#include + +const char *get_system_type(void) +{ + return "GPR"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtoul(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} + +void prom_putchar(unsigned char c) +{ + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); +} + +static void gpr_reset(char *c) +{ + /* switch System-LED to orange (red# and green# on) */ + alchemy_gpio_direction_output(4, 0); + alchemy_gpio_direction_output(5, 0); + + /* trigger watchdog to reset board in 200ms */ + printk(KERN_EMERG "Triggering watchdog soft reset...\n"); + raw_local_irq_disable(); + alchemy_gpio_direction_output(1, 0); + udelay(1); + alchemy_gpio_set_value(1, 1); + while (1) + cpu_wait(); +} + +static void gpr_power_off(void) +{ + while (1) + cpu_wait(); +} + +void __init board_setup(void) +{ + printk(KERN_INFO "Trapeze ITS GPR board\n"); + + pm_power_off = gpr_power_off; + _machine_halt = gpr_power_off; + _machine_restart = gpr_reset; + + /* Enable UART1/3 */ + alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); + alchemy_uart_enable(AU1000_UART1_PHYS_ADDR); + + /* Take away Reset of UMTS-card */ + alchemy_gpio_direction_output(215, 1); +} /* * Watchdog @@ -152,7 +225,7 @@ static struct i2c_gpio_platform_data gpr_i2c_data = { .scl_is_open_drain = 1, .udelay = 2, /* ~100 kHz */ .timeout = HZ, - }; +}; static struct platform_device gpr_i2c_device = { .name = "i2c-gpio", @@ -184,7 +257,7 @@ static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) else if ((slot == 0) && (pin == 2)) return AU1550_PCI_INTB; - return -1; + return 0xff; } static struct alchemy_pci_platdata gpr_pci_pd = { diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/board-mtx1.c similarity index 71% rename from arch/mips/alchemy/mtx-1/platform.c rename to arch/mips/alchemy/board-mtx1.c index cc47b6868ca3..295f1a95f745 100644 --- a/arch/mips/alchemy/mtx-1/platform.c +++ b/arch/mips/alchemy/board-mtx1.c @@ -1,5 +1,5 @@ /* - * MTX-1 platform devices registration + * MTX-1 platform devices registration (Au1500) * * Copyright (C) 2007-2009, Florian Fainelli * @@ -19,6 +19,8 @@ */ #include +#include +#include #include #include #include @@ -27,8 +29,85 @@ #include #include #include - +#include +#include +#include #include +#include + +const char *get_system_type(void) +{ + return "MTX-1"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtoul(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} + +void prom_putchar(unsigned char c) +{ + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); +} + +static void mtx1_reset(char *c) +{ + /* Jump to the reset vector */ + __asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000)); +} + +static void mtx1_power_off(void) +{ + while (1) + asm volatile ( + " .set mips32 \n" + " wait \n" + " .set mips0 \n"); +} + +void __init board_setup(void) +{ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + /* Enable USB power switch */ + alchemy_gpio_direction_output(204, 0); +#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ + + /* Initialize sys_pinfunc */ + au_writel(SYS_PF_NI2, SYS_PINFUNC); + + /* Initialize GPIO */ + au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR); + alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */ + alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */ + alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */ + alchemy_gpio_direction_output(5, 0); /* Disable eth PHY TX_ER */ + + /* Enable LED and set it to green */ + alchemy_gpio_direction_output(211, 1); /* green on */ + alchemy_gpio_direction_output(212, 0); /* red off */ + + pm_power_off = mtx1_power_off; + _machine_halt = mtx1_power_off; + _machine_restart = mtx1_reset; + + printk(KERN_INFO "4G Systems MTX-1 Board\n"); +} + +/******************************************************************************/ static struct gpio_keys_button mtx1_gpio_button[] = { { @@ -195,7 +274,6 @@ static struct platform_device mtx1_pci_host = { .resource = alchemy_pci_host_res, }; - static struct __initdata platform_device * mtx1_devs[] = { &mtx1_pci_host, &mtx1_gpio_leds, @@ -206,13 +284,19 @@ static struct __initdata platform_device * mtx1_devs[] = { static struct au1000_eth_platform_data mtx1_au1000_eth0_pdata = { .phy_search_highest_addr = 1, - .phy1_search_mac0 = 1, + .phy1_search_mac0 = 1, }; static int __init mtx1_register_devices(void) { int rc; + irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_HIGH); + irq_set_irq_type(AU1500_GPIO201_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO202_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO203_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW); + au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata); rc = gpio_request(mtx1_gpio_button[0].gpio, @@ -226,5 +310,4 @@ static int __init mtx1_register_devices(void) out: return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs)); } - arch_initcall(mtx1_register_devices); diff --git a/arch/mips/alchemy/board-xxs1500.c b/arch/mips/alchemy/board-xxs1500.c new file mode 100644 index 000000000000..bd5513650293 --- /dev/null +++ b/arch/mips/alchemy/board-xxs1500.c @@ -0,0 +1,154 @@ +/* + * BRIEF MODULE DESCRIPTION + * MyCable XXS1500 board support + * + * Copyright 2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +const char *get_system_type(void) +{ + return "XXS1500"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize)) + memsize = 0x04000000; + + add_memory_region(0, memsize, BOOT_MEM_RAM); +} + +void prom_putchar(unsigned char c) +{ + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); +} + +static void xxs1500_reset(char *c) +{ + /* Jump to the reset vector */ + __asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000)); +} + +static void xxs1500_power_off(void) +{ + while (1) + asm volatile ( + " .set mips32 \n" + " wait \n" + " .set mips0 \n"); +} + +void __init board_setup(void) +{ + u32 pin_func; + + pm_power_off = xxs1500_power_off; + _machine_halt = xxs1500_power_off; + _machine_restart = xxs1500_reset; + + alchemy_gpio1_input_enable(); + alchemy_gpio2_enable(); + + /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; + pin_func |= SYS_PF_UR3; + au_writel(pin_func, SYS_PINFUNC); + + /* Enable UART */ + alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); + /* Enable DTR (MCR bit 0) = USB power up */ + __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18)); + wmb(); +} + +/******************************************************************************/ + +static struct resource xxs1500_pcmcia_res[] = { + { + .name = "pcmcia-io", + .flags = IORESOURCE_MEM, + .start = AU1000_PCMCIA_IO_PHYS_ADDR, + .end = AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1, + }, + { + .name = "pcmcia-attr", + .flags = IORESOURCE_MEM, + .start = AU1000_PCMCIA_ATTR_PHYS_ADDR, + .end = AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + }, + { + .name = "pcmcia-mem", + .flags = IORESOURCE_MEM, + .start = AU1000_PCMCIA_MEM_PHYS_ADDR, + .end = AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + }, +}; + +static struct platform_device xxs1500_pcmcia_dev = { + .name = "xxs1500_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(xxs1500_pcmcia_res), + .resource = xxs1500_pcmcia_res, +}; + +static struct platform_device *xxs1500_devs[] __initdata = { + &xxs1500_pcmcia_dev, +}; + +static int __init xxs1500_dev_init(void) +{ + irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_HIGH); + irq_set_irq_type(AU1500_GPIO201_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO202_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO203_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO207_INT, IRQ_TYPE_LEVEL_LOW); + + irq_set_irq_type(AU1500_GPIO0_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO1_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO2_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO3_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO4_INT, IRQ_TYPE_LEVEL_LOW); /* CF irq */ + irq_set_irq_type(AU1500_GPIO5_INT, IRQ_TYPE_LEVEL_LOW); + + return platform_add_devices(xxs1500_devs, + ARRAY_SIZE(xxs1500_devs)); +} +device_initcall(xxs1500_dev_init); diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile index 811ece7b22e3..407ebc00e661 100644 --- a/arch/mips/alchemy/common/Makefile +++ b/arch/mips/alchemy/common/Makefile @@ -6,9 +6,7 @@ # obj-y += prom.o time.o clocks.o platform.o power.o setup.o \ - sleeper.o dma.o dbdma.o - -obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o + sleeper.o dma.o dbdma.o vss.o irq.o # optional gpiolib support ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),) diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index 9ba407b4fc97..cf02d7dc2df0 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -148,6 +148,50 @@ static dbdev_tab_t au1200_dbdev_tab[] __initdata = { { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, }; +static dbdev_tab_t au1300_dbdev_tab[] __initdata = { + { AU1300_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x10100004, 0, 0 }, + { AU1300_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x10100000, 0, 0 }, + { AU1300_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x10101004, 0, 0 }, + { AU1300_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x10101000, 0, 0 }, + { AU1300_DSCR_CMD0_UART2_TX, DEV_FLAGS_OUT, 0, 8, 0x10102004, 0, 0 }, + { AU1300_DSCR_CMD0_UART2_RX, DEV_FLAGS_IN, 0, 8, 0x10102000, 0, 0 }, + { AU1300_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x10103004, 0, 0 }, + { AU1300_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x10103000, 0, 0 }, + + { AU1300_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 }, + { AU1300_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 }, + { AU1300_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 8, 8, 0x10601000, 0, 0 }, + { AU1300_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 8, 8, 0x10601004, 0, 0 }, + + { AU1300_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 }, + { AU1300_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 }, + + { AU1300_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0001c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x10a0001c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0101c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x10a0101c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0201c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 16, 0x10a0201c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0301c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 16, 0x10a0301c, 0, 0 }, + + { AU1300_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1300_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + + { AU1300_DSCR_CMD0_SDMS_TX2, DEV_FLAGS_OUT, 4, 8, 0x10602000, 0, 0 }, + { AU1300_DSCR_CMD0_SDMS_RX2, DEV_FLAGS_IN, 4, 8, 0x10602004, 0, 0 }, + + { AU1300_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + { AU1300_DSCR_CMD0_UDMA, DEV_FLAGS_ANYUSE, 0, 32, 0x14001810, 0, 0 }, + + { AU1300_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1300_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, + + { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, +}; + /* 32 predefined plus 32 custom */ #define DBDEV_TAB_SIZE 64 @@ -1037,6 +1081,8 @@ static int __init alchemy_dbdma_init(void) return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab); case ALCHEMY_CPU_AU1200: return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab); + case ALCHEMY_CPU_AU1300: + return dbdma_setup(AU1300_DDMA_INT, au1300_dbdev_tab); } return 0; } diff --git a/arch/mips/alchemy/common/gpiolib.c b/arch/mips/alchemy/common/gpiolib.c index 91fb4d9e30fd..f1b50f0c01db 100644 --- a/arch/mips/alchemy/common/gpiolib.c +++ b/arch/mips/alchemy/common/gpiolib.c @@ -27,6 +27,7 @@ * CONFIG_ALCHEMY_GPIO_INDIRECT=n, otherwise compilation will fail! * au1000 SoC have only one GPIO block : GPIO1 * Au1100, Au15x0, Au12x0 have a second one : GPIO2 + * Au1300 is totally different: 1 block with up to 128 GPIOs */ #include @@ -35,6 +36,7 @@ #include #include #include +#include static int gpio2_get(struct gpio_chip *chip, unsigned offset) { @@ -115,6 +117,43 @@ struct gpio_chip alchemy_gpio_chip[] = { }, }; +static int alchemy_gpic_get(struct gpio_chip *chip, unsigned int off) +{ + return au1300_gpio_get_value(off + AU1300_GPIO_BASE); +} + +static void alchemy_gpic_set(struct gpio_chip *chip, unsigned int off, int v) +{ + au1300_gpio_set_value(off + AU1300_GPIO_BASE, v); +} + +static int alchemy_gpic_dir_input(struct gpio_chip *chip, unsigned int off) +{ + return au1300_gpio_direction_input(off + AU1300_GPIO_BASE); +} + +static int alchemy_gpic_dir_output(struct gpio_chip *chip, unsigned int off, + int v) +{ + return au1300_gpio_direction_output(off + AU1300_GPIO_BASE, v); +} + +static int alchemy_gpic_gpio_to_irq(struct gpio_chip *chip, unsigned int off) +{ + return au1300_gpio_to_irq(off + AU1300_GPIO_BASE); +} + +static struct gpio_chip au1300_gpiochip = { + .label = "alchemy-gpic", + .direction_input = alchemy_gpic_dir_input, + .direction_output = alchemy_gpic_dir_output, + .get = alchemy_gpic_get, + .set = alchemy_gpic_set, + .to_irq = alchemy_gpic_gpio_to_irq, + .base = AU1300_GPIO_BASE, + .ngpio = AU1300_GPIO_NUM, +}; + static int __init alchemy_gpiochip_init(void) { int ret = 0; @@ -127,6 +166,9 @@ static int __init alchemy_gpiochip_init(void) ret = gpiochip_add(&alchemy_gpio_chip[0]); ret |= gpiochip_add(&alchemy_gpio_chip[1]); break; + case ALCHEMY_CPU_AU1300: + ret = gpiochip_add(&au1300_gpiochip); + break; } return ret; } diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c index 8b60ba0675e2..94fbcd19eb9c 100644 --- a/arch/mips/alchemy/common/irq.c +++ b/arch/mips/alchemy/common/irq.c @@ -25,19 +25,15 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include +#include #include #include -#include #include #include #include -#include #include -#ifdef CONFIG_MIPS_PB1000 -#include -#endif +#include /* Interrupt Controller register offsets */ #define IC_CFG0RD 0x40 @@ -69,7 +65,17 @@ #define IC_FALLINGCLR 0x7C #define IC_TESTBIT 0x80 -static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type); +/* per-processor fixed function irqs */ +struct alchemy_irqmap { + int irq; /* linux IRQ number */ + int type; /* IRQ_TYPE_ */ + int prio; /* irq priority, 0 highest, 3 lowest */ + int internal; /* GPIC: internal source (no ext. pin)? */ +}; + +static int au1x_ic_settype(struct irq_data *d, unsigned int type); +static int au1300_gpic_settype(struct irq_data *d, unsigned int type); + /* NOTE on interrupt priorities: The original writers of this code said: * @@ -77,176 +83,207 @@ static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type); * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT) * needs the highest priority. */ - -/* per-processor fixed function irqs */ -struct au1xxx_irqmap { - int im_irq; - int im_type; - int im_request; /* set 1 to get higher priority */ -}; - -struct au1xxx_irqmap au1000_irqmap[] __initdata = { - { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, - { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, +struct alchemy_irqmap au1000_irqmap[] __initdata = { + { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { -1, }, }; -struct au1xxx_irqmap au1500_irqmap[] __initdata = { - { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, - { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, +struct alchemy_irqmap au1500_irqmap[] __initdata = { + { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { -1, }, }; -struct au1xxx_irqmap au1100_irqmap[] __initdata = { - { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, - { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, +struct alchemy_irqmap au1100_irqmap[] __initdata = { + { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { -1, }, }; -struct au1xxx_irqmap au1550_irqmap[] __initdata = { - { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, - { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, +struct alchemy_irqmap au1550_irqmap[] __initdata = { + { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { -1, }, }; -struct au1xxx_irqmap au1200_irqmap[] __initdata = { - { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, +struct alchemy_irqmap au1200_irqmap[] __initdata = { + { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { -1, }, }; +static struct alchemy_irqmap au1300_irqmap[] __initdata = { + /* multifunction: gpio pin or device */ + { AU1300_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_SD1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_SD2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_NAND_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + /* au1300 internal */ + { AU1300_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_MMU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_MPU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_GPU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_UDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 1, }, + { AU1300_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_SD0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_USB_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_BSA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_MPE_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_ITE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_AES_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_CIM_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { -1, }, /* terminator */ +}; + +/******************************************************************************/ static void au1x_ic0_unmask(struct irq_data *d) { @@ -265,14 +302,6 @@ static void au1x_ic1_unmask(struct irq_data *d) __raw_writel(1 << bit, base + IC_MASKSET); __raw_writel(1 << bit, base + IC_WAKESET); - -/* very hacky. does the pb1000 cpld auto-disable this int? - * nowhere in the current kernel sources is it disabled. --mlau - */ -#if defined(CONFIG_MIPS_PB1000) - if (d->irq == AU1000_GPIO15_INT) - __raw_writel(0x4000, (void __iomem *)PB1000_MDR); /* enable int */ -#endif wmb(); } @@ -470,40 +499,219 @@ static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type) return ret; } -asmlinkage void plat_irq_dispatch(void) +/******************************************************************************/ + +/* + * au1300_gpic_chgcfg - change PIN configuration. + * @gpio: pin to change (0-based GPIO number from datasheet). + * @clr: clear all bits set in 'clr'. + * @set: set these bits. + * + * modifies a pins' configuration register, bits set in @clr will + * be cleared in the register, bits in @set will be set. + */ +static inline void au1300_gpic_chgcfg(unsigned int gpio, + unsigned long clr, + unsigned long set) { - unsigned int pending = read_c0_status() & read_c0_cause(); - unsigned long s, off; + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long l; - if (pending & CAUSEF_IP7) { - off = MIPS_CPU_IRQ_BASE + 7; - goto handle; - } else if (pending & CAUSEF_IP2) { - s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ0INT; - off = AU1000_INTC0_INT_BASE; - } else if (pending & CAUSEF_IP3) { - s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ1INT; - off = AU1000_INTC0_INT_BASE; - } else if (pending & CAUSEF_IP4) { - s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ0INT; - off = AU1000_INTC1_INT_BASE; - } else if (pending & CAUSEF_IP5) { - s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ1INT; - off = AU1000_INTC1_INT_BASE; - } else - goto spurious; - - s = __raw_readl((void __iomem *)s); - if (unlikely(!s)) { -spurious: - spurious_interrupt(); - return; - } - off += __ffs(s); -handle: - do_IRQ(off); + r += gpio * 4; /* offset into pin config array */ + l = __raw_readl(r + AU1300_GPIC_PINCFG); + l &= ~clr; + l |= set; + __raw_writel(l, r + AU1300_GPIC_PINCFG); + wmb(); } +/* + * au1300_pinfunc_to_gpio - assign a pin as GPIO input (GPIO ctrl). + * @pin: pin (0-based GPIO number from datasheet). + * + * Assigns a GPIO pin to the GPIO controller, so its level can either + * be read or set through the generic GPIO functions. + * If you need a GPOUT, use au1300_gpio_set_value(pin, 0/1). + * REVISIT: is this function really necessary? + */ +void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio) +{ + au1300_gpio_direction_input(gpio + AU1300_GPIO_BASE); +} +EXPORT_SYMBOL_GPL(au1300_pinfunc_to_gpio); + +/* + * au1300_pinfunc_to_dev - assign a pin to the device function. + * @pin: pin (0-based GPIO number from datasheet). + * + * Assigns a GPIO pin to its associated device function; the pin will be + * driven by the device and not through GPIO functions. + */ +void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit; + + r += GPIC_GPIO_BANKOFF(gpio); + bit = GPIC_GPIO_TO_BIT(gpio); + __raw_writel(bit, r + AU1300_GPIC_DEVSEL); + wmb(); +} +EXPORT_SYMBOL_GPL(au1300_pinfunc_to_dev); + +/* + * au1300_set_irq_priority - set internal priority of IRQ. + * @irq: irq to set priority (linux irq number). + * @p: priority (0 = highest, 3 = lowest). + */ +void au1300_set_irq_priority(unsigned int irq, int p) +{ + irq -= ALCHEMY_GPIC_INT_BASE; + au1300_gpic_chgcfg(irq, GPIC_CFG_IL_MASK, GPIC_CFG_IL_SET(p)); +} +EXPORT_SYMBOL_GPL(au1300_set_irq_priority); + +/* + * au1300_set_dbdma_gpio - assign a gpio to one of the DBDMA triggers. + * @dchan: dbdma trigger select (0, 1). + * @gpio: pin to assign as trigger. + * + * DBDMA controller has 2 external trigger sources; this function + * assigns a GPIO to the selected trigger. + */ +void au1300_set_dbdma_gpio(int dchan, unsigned int gpio) +{ + unsigned long r; + + if ((dchan >= 0) && (dchan <= 1)) { + r = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL); + r &= ~(0xff << (8 * dchan)); + r |= (gpio & 0x7f) << (8 * dchan); + __raw_writel(r, AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL); + wmb(); + } +} + +static inline void gpic_pin_set_idlewake(unsigned int gpio, int allow) +{ + au1300_gpic_chgcfg(gpio, GPIC_CFG_IDLEWAKE, + allow ? GPIC_CFG_IDLEWAKE : 0); +} + +static void au1300_gpic_mask(struct irq_data *d) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; + + irq -= ALCHEMY_GPIC_INT_BASE; + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IDIS); + wmb(); + + gpic_pin_set_idlewake(irq, 0); +} + +static void au1300_gpic_unmask(struct irq_data *d) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; + + irq -= ALCHEMY_GPIC_INT_BASE; + + gpic_pin_set_idlewake(irq, 1); + + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IEN); + wmb(); +} + +static void au1300_gpic_maskack(struct irq_data *d) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; + + irq -= ALCHEMY_GPIC_INT_BASE; + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IPEND); /* ack */ + __raw_writel(bit, r + AU1300_GPIC_IDIS); /* mask */ + wmb(); + + gpic_pin_set_idlewake(irq, 0); +} + +static void au1300_gpic_ack(struct irq_data *d) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; + + irq -= ALCHEMY_GPIC_INT_BASE; + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IPEND); /* ack */ + wmb(); +} + +static struct irq_chip au1300_gpic = { + .name = "GPIOINT", + .irq_ack = au1300_gpic_ack, + .irq_mask = au1300_gpic_mask, + .irq_mask_ack = au1300_gpic_maskack, + .irq_unmask = au1300_gpic_unmask, + .irq_set_type = au1300_gpic_settype, +}; + +static int au1300_gpic_settype(struct irq_data *d, unsigned int type) +{ + unsigned long s; + unsigned char *name = NULL; + irq_flow_handler_t hdl = NULL; + + switch (type) { + case IRQ_TYPE_LEVEL_HIGH: + s = GPIC_CFG_IC_LEVEL_HIGH; + name = "high"; + hdl = handle_level_irq; + break; + case IRQ_TYPE_LEVEL_LOW: + s = GPIC_CFG_IC_LEVEL_LOW; + name = "low"; + hdl = handle_level_irq; + break; + case IRQ_TYPE_EDGE_RISING: + s = GPIC_CFG_IC_EDGE_RISE; + name = "posedge"; + hdl = handle_edge_irq; + break; + case IRQ_TYPE_EDGE_FALLING: + s = GPIC_CFG_IC_EDGE_FALL; + name = "negedge"; + hdl = handle_edge_irq; + break; + case IRQ_TYPE_EDGE_BOTH: + s = GPIC_CFG_IC_EDGE_BOTH; + name = "bothedge"; + hdl = handle_edge_irq; + break; + case IRQ_TYPE_NONE: + s = GPIC_CFG_IC_OFF; + name = "disabled"; + hdl = handle_level_irq; + break; + default: + return -EINVAL; + } + + __irq_set_chip_handler_name_locked(d->irq, &au1300_gpic, hdl, name); + + au1300_gpic_chgcfg(d->irq - ALCHEMY_GPIC_INT_BASE, GPIC_CFG_IC_MASK, s); + + return 0; +} + +/******************************************************************************/ static inline void ic_init(void __iomem *base) { @@ -521,72 +729,7 @@ static inline void ic_init(void __iomem *base) wmb(); } -static void __init au1000_init_irq(struct au1xxx_irqmap *map) -{ - unsigned int bit, irq_nr; - void __iomem *base; - - ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR)); - ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR)); - mips_cpu_irq_init(); - - /* register all 64 possible IC0+IC1 irq sources as type "none". - * Use set_irq_type() to set edge/level behaviour at runtime. - */ - for (irq_nr = AU1000_INTC0_INT_BASE; - (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++) - au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); - - for (irq_nr = AU1000_INTC1_INT_BASE; - (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++) - au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); - - /* - * Initialize IC0, which is fixed per processor. - */ - while (map->im_irq != -1) { - irq_nr = map->im_irq; - - if (irq_nr >= AU1000_INTC1_INT_BASE) { - bit = irq_nr - AU1000_INTC1_INT_BASE; - base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); - } else { - bit = irq_nr - AU1000_INTC0_INT_BASE; - base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); - } - if (map->im_request) - __raw_writel(1 << bit, base + IC_ASSIGNSET); - - au1x_ic_settype(irq_get_irq_data(irq_nr), map->im_type); - ++map; - } - - set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3); -} - -void __init arch_init_irq(void) -{ - switch (alchemy_get_cputype()) { - case ALCHEMY_CPU_AU1000: - au1000_init_irq(au1000_irqmap); - break; - case ALCHEMY_CPU_AU1500: - au1000_init_irq(au1500_irqmap); - break; - case ALCHEMY_CPU_AU1100: - au1000_init_irq(au1100_irqmap); - break; - case ALCHEMY_CPU_AU1550: - au1000_init_irq(au1550_irqmap); - break; - case ALCHEMY_CPU_AU1200: - au1000_init_irq(au1200_irqmap); - break; - } -} - - -static unsigned long alchemy_ic_pmdata[7 * 2]; +static unsigned long alchemy_gpic_pmdata[ALCHEMY_GPIC_INT_NUM + 6]; static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d) { @@ -619,28 +762,236 @@ static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d) static int alchemy_ic_suspend(void) { alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), - alchemy_ic_pmdata); + alchemy_gpic_pmdata); alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), - &alchemy_ic_pmdata[7]); + &alchemy_gpic_pmdata[7]); return 0; } static void alchemy_ic_resume(void) { alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), - &alchemy_ic_pmdata[7]); + &alchemy_gpic_pmdata[7]); alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), - alchemy_ic_pmdata); + alchemy_gpic_pmdata); } -static struct syscore_ops alchemy_ic_syscore_ops = { +static int alchemy_gpic_suspend(void) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); + int i; + + /* save 4 interrupt mask status registers */ + alchemy_gpic_pmdata[0] = __raw_readl(base + AU1300_GPIC_IEN + 0x0); + alchemy_gpic_pmdata[1] = __raw_readl(base + AU1300_GPIC_IEN + 0x4); + alchemy_gpic_pmdata[2] = __raw_readl(base + AU1300_GPIC_IEN + 0x8); + alchemy_gpic_pmdata[3] = __raw_readl(base + AU1300_GPIC_IEN + 0xc); + + /* save misc register(s) */ + alchemy_gpic_pmdata[4] = __raw_readl(base + AU1300_GPIC_DMASEL); + + /* molto silenzioso */ + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc); + wmb(); + + /* save pin/int-type configuration */ + base += AU1300_GPIC_PINCFG; + for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++) + alchemy_gpic_pmdata[i + 5] = __raw_readl(base + (i << 2)); + + wmb(); + + return 0; +} + +static void alchemy_gpic_resume(void) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); + int i; + + /* disable all first */ + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc); + wmb(); + + /* restore pin/int-type configurations */ + base += AU1300_GPIC_PINCFG; + for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++) + __raw_writel(alchemy_gpic_pmdata[i + 5], base + (i << 2)); + wmb(); + + /* restore misc register(s) */ + base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); + __raw_writel(alchemy_gpic_pmdata[4], base + AU1300_GPIC_DMASEL); + wmb(); + + /* finally restore masks */ + __raw_writel(alchemy_gpic_pmdata[0], base + AU1300_GPIC_IEN + 0x0); + __raw_writel(alchemy_gpic_pmdata[1], base + AU1300_GPIC_IEN + 0x4); + __raw_writel(alchemy_gpic_pmdata[2], base + AU1300_GPIC_IEN + 0x8); + __raw_writel(alchemy_gpic_pmdata[3], base + AU1300_GPIC_IEN + 0xc); + wmb(); +} + +static struct syscore_ops alchemy_ic_pmops = { .suspend = alchemy_ic_suspend, .resume = alchemy_ic_resume, }; -static int __init alchemy_ic_pm_init(void) -{ - register_syscore_ops(&alchemy_ic_syscore_ops); - return 0; +static struct syscore_ops alchemy_gpic_pmops = { + .suspend = alchemy_gpic_suspend, + .resume = alchemy_gpic_resume, +}; + +/******************************************************************************/ + +/* create chained handlers for the 4 IC requests to the MIPS IRQ ctrl */ +#define DISP(name, base, addr) \ +static void au1000_##name##_dispatch(unsigned int irq, struct irq_desc *d) \ +{ \ + unsigned long r = __raw_readl((void __iomem *)KSEG1ADDR(addr)); \ + if (likely(r)) \ + generic_handle_irq(base + __ffs(r)); \ + else \ + spurious_interrupt(); \ +} + +DISP(ic0r0, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ0INT) +DISP(ic0r1, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ1INT) +DISP(ic1r0, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ0INT) +DISP(ic1r1, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ1INT) + +static void alchemy_gpic_dispatch(unsigned int irq, struct irq_desc *d) +{ + int i = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_PRIENC); + generic_handle_irq(ALCHEMY_GPIC_INT_BASE + i); +} + +/******************************************************************************/ + +static void __init au1000_init_irq(struct alchemy_irqmap *map) +{ + unsigned int bit, irq_nr; + void __iomem *base; + + ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR)); + ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR)); + register_syscore_ops(&alchemy_ic_pmops); + mips_cpu_irq_init(); + + /* register all 64 possible IC0+IC1 irq sources as type "none". + * Use set_irq_type() to set edge/level behaviour at runtime. + */ + for (irq_nr = AU1000_INTC0_INT_BASE; + (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++) + au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); + + for (irq_nr = AU1000_INTC1_INT_BASE; + (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++) + au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); + + /* + * Initialize IC0, which is fixed per processor. + */ + while (map->irq != -1) { + irq_nr = map->irq; + + if (irq_nr >= AU1000_INTC1_INT_BASE) { + bit = irq_nr - AU1000_INTC1_INT_BASE; + base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + } else { + bit = irq_nr - AU1000_INTC0_INT_BASE; + base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); + } + if (map->prio == 0) + __raw_writel(1 << bit, base + IC_ASSIGNSET); + + au1x_ic_settype(irq_get_irq_data(irq_nr), map->type); + ++map; + } + + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, au1000_ic0r0_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, au1000_ic0r1_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, au1000_ic1r0_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, au1000_ic1r1_dispatch); +} + +static void __init alchemy_gpic_init_irq(const struct alchemy_irqmap *dints) +{ + int i; + void __iomem *bank_base; + + register_syscore_ops(&alchemy_gpic_pmops); + mips_cpu_irq_init(); + + /* disable & ack all possible interrupt sources */ + for (i = 0; i < 4; i++) { + bank_base = AU1300_GPIC_ADDR + (i * 4); + __raw_writel(~0UL, bank_base + AU1300_GPIC_IDIS); + wmb(); + __raw_writel(~0UL, bank_base + AU1300_GPIC_IPEND); + wmb(); + } + + /* register an irq_chip for them, with 2nd highest priority */ + for (i = ALCHEMY_GPIC_INT_BASE; i <= ALCHEMY_GPIC_INT_LAST; i++) { + au1300_set_irq_priority(i, 1); + au1300_gpic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE); + } + + /* setup known on-chip sources */ + while ((i = dints->irq) != -1) { + au1300_gpic_settype(irq_get_irq_data(i), dints->type); + au1300_set_irq_priority(i, dints->prio); + + if (dints->internal) + au1300_pinfunc_to_dev(i - ALCHEMY_GPIC_INT_BASE); + + dints++; + } + + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, alchemy_gpic_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, alchemy_gpic_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, alchemy_gpic_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, alchemy_gpic_dispatch); +} + +/******************************************************************************/ + +void __init arch_init_irq(void) +{ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + au1000_init_irq(au1000_irqmap); + break; + case ALCHEMY_CPU_AU1500: + au1000_init_irq(au1500_irqmap); + break; + case ALCHEMY_CPU_AU1100: + au1000_init_irq(au1100_irqmap); + break; + case ALCHEMY_CPU_AU1550: + au1000_init_irq(au1550_irqmap); + break; + case ALCHEMY_CPU_AU1200: + au1000_init_irq(au1200_irqmap); + break; + case ALCHEMY_CPU_AU1300: + alchemy_gpic_init_irq(au1300_irqmap); + break; + default: + pr_err("unknown Alchemy IRQ core\n"); + break; + } +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long r = (read_c0_status() & read_c0_cause()) >> 8; + do_IRQ(MIPS_CPU_IRQ_BASE + __ffs(r & 0xff)); } -device_initcall(alchemy_ic_pm_init); diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index c8e5d72a5826..95cb9113b12c 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -82,6 +82,12 @@ static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = { PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT), PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT), }, + [ALCHEMY_CPU_AU1300] = { + PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT), + PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT), + PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT), + PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT), + }, }; static struct platform_device au1xx0_uart_device = { @@ -122,10 +128,12 @@ static unsigned long alchemy_ohci_data[][2] __initdata = { [ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT }, [ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT }, [ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT }, + [ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT }, }; static unsigned long alchemy_ehci_data[][2] __initdata = { [ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT }, + [ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT }, }; static int __init _new_usbres(struct resource **r, struct platform_device **d) @@ -169,8 +177,8 @@ static void __init alchemy_setup_usb(int ctype) printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n"); - /* setup EHCI0: Au1200 */ - if (ctype == ALCHEMY_CPU_AU1200) { + /* setup EHCI0: Au1200/Au1300 */ + if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) { if (_new_usbres(&res, &pdev)) return; @@ -187,6 +195,25 @@ static void __init alchemy_setup_usb(int ctype) if (platform_device_register(pdev)) printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n"); } + + /* Au1300: OHCI1 */ + if (ctype == ALCHEMY_CPU_AU1300) { + if (_new_usbres(&res, &pdev)) + return; + + res[0].start = AU1300_USB_OHCI1_PHYS_ADDR; + res[0].end = res[0].start + 0x100 - 1; + res[0].flags = IORESOURCE_MEM; + res[1].start = AU1300_USB_INT; + res[1].end = res[1].start; + res[1].flags = IORESOURCE_IRQ; + pdev->name = "au1xxx-ohci"; + pdev->id = 1; + pdev->dev.dma_mask = &alchemy_ohci_dmamask; + + if (platform_device_register(pdev)) + printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n"); + } } /* Macro to help defining the Ethernet MAC resources */ diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c index bdd6651e9a4f..0c7fce2a3c12 100644 --- a/arch/mips/alchemy/common/power.c +++ b/arch/mips/alchemy/common/power.c @@ -126,6 +126,9 @@ void au_sleep(void) case ALCHEMY_CPU_AU1200: alchemy_sleep_au1550(); break; + case ALCHEMY_CPU_AU1300: + alchemy_sleep_au1300(); + break; } restore_core_regs(); diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S index 77f3c743b716..c7bcc7e5c822 100644 --- a/arch/mips/alchemy/common/sleeper.S +++ b/arch/mips/alchemy/common/sleeper.S @@ -153,6 +153,79 @@ LEAF(alchemy_sleep_au1550) END(alchemy_sleep_au1550) +/* sleepcode for Au1300 memory controller type */ +LEAF(alchemy_sleep_au1300) + + SETUP_SLEEP + + /* cache following instructions, as memory gets put to sleep */ + la t0, 2f + la t1, 4f + subu t2, t1, t0 + + .set mips3 + +1: cache 0x14, 0(t0) + subu t2, t2, 32 + bgez t2, 1b + addu t0, t0, 32 + + .set mips0 + +2: lui a0, 0xb400 /* mem_xxx */ + + /* disable all ports in mem_sdportcfga */ + sw zero, 0x868(a0) /* mem_sdportcfga */ + sync + + /* disable ODT */ + li t0, 0x03010000 + sw t0, 0x08d8(a0) /* mem_sdcmd0 */ + sw t0, 0x08dc(a0) /* mem_sdcmd1 */ + sync + + /* precharge */ + li t0, 0x23000400 + sw t0, 0x08dc(a0) /* mem_sdcmd1 */ + sw t0, 0x08d8(a0) /* mem_sdcmd0 */ + sync + + /* auto refresh */ + sw zero, 0x08c8(a0) /* mem_sdautoref */ + sync + + /* block access to the DDR */ + lw t0, 0x0848(a0) /* mem_sdconfigb */ + li t1, (1 << 7 | 0x3F) + or t0, t0, t1 + sw t0, 0x0848(a0) /* mem_sdconfigb */ + sync + + /* issue the Self Refresh command */ + li t0, 0x10000000 + sw t0, 0x08dc(a0) /* mem_sdcmd1 */ + sw t0, 0x08d8(a0) /* mem_sdcmd0 */ + sync + + /* wait for sdram to enter self-refresh mode */ + lui t0, 0x0300 +3: lw t1, 0x0850(a0) /* mem_sdstat */ + and t2, t1, t0 + bne t2, t0, 3b + nop + + /* disable SDRAM clocks */ + li t0, ~(3<<28) + lw t1, 0x0840(a0) /* mem_sdconfiga */ + and t1, t1, t0 /* clear CE[1:0] */ + sw t1, 0x0840(a0) /* mem_sdconfiga */ + sync + + DO_SLEEP +4: + +END(alchemy_sleep_au1300) + /* This is where we return upon wakeup. * Reload all of the registers and return. diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 146a5fa80360..7da4d0081487 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -178,6 +178,7 @@ static int alchemy_m2inttab[] __initdata = { AU1100_RTC_MATCH2_INT, AU1550_RTC_MATCH2_INT, AU1200_RTC_MATCH2_INT, + AU1300_RTC_MATCH2_INT, }; void __init plat_time_init(void) diff --git a/arch/mips/alchemy/common/vss.c b/arch/mips/alchemy/common/vss.c new file mode 100644 index 000000000000..d23b1444d365 --- /dev/null +++ b/arch/mips/alchemy/common/vss.c @@ -0,0 +1,84 @@ +/* + * Au1300 media block power gating (VSS) + * + * This is a stop-gap solution until I have the clock framework integration + * ready. This stuff here really must be handled transparently when clocks + * for various media blocks are enabled/disabled. + */ + +#include +#include +#include + +#define VSS_GATE 0x00 /* gate wait timers */ +#define VSS_CLKRST 0x04 /* clock/block control */ +#define VSS_FTR 0x08 /* footers */ + +#define VSS_ADDR(blk) (KSEG1ADDR(AU1300_VSS_PHYS_ADDR) + (blk * 0x0c)) + +static DEFINE_SPINLOCK(au1300_vss_lock); + +/* enable a block as outlined in the databook */ +static inline void __enable_block(int block) +{ + void __iomem *base = (void __iomem *)VSS_ADDR(block); + + __raw_writel(3, base + VSS_CLKRST); /* enable clock, assert reset */ + wmb(); + + __raw_writel(0x01fffffe, base + VSS_GATE); /* maximum setup time */ + wmb(); + + /* enable footers in sequence */ + __raw_writel(0x01, base + VSS_FTR); + wmb(); + __raw_writel(0x03, base + VSS_FTR); + wmb(); + __raw_writel(0x07, base + VSS_FTR); + wmb(); + __raw_writel(0x0f, base + VSS_FTR); + wmb(); + + __raw_writel(0x01ffffff, base + VSS_GATE); /* start FSM too */ + wmb(); + + __raw_writel(2, base + VSS_CLKRST); /* deassert reset */ + wmb(); + + __raw_writel(0x1f, base + VSS_FTR); /* enable isolation cells */ + wmb(); +} + +/* disable a block as outlined in the databook */ +static inline void __disable_block(int block) +{ + void __iomem *base = (void __iomem *)VSS_ADDR(block); + + __raw_writel(0x0f, base + VSS_FTR); /* disable isolation cells */ + wmb(); + __raw_writel(0, base + VSS_GATE); /* disable FSM */ + wmb(); + __raw_writel(3, base + VSS_CLKRST); /* assert reset */ + wmb(); + __raw_writel(1, base + VSS_CLKRST); /* disable clock */ + wmb(); + __raw_writel(0, base + VSS_FTR); /* disable all footers */ + wmb(); +} + +void au1300_vss_block_control(int block, int enable) +{ + unsigned long flags; + + if (alchemy_get_cputype() != ALCHEMY_CPU_AU1300) + return; + + /* only one block at a time */ + spin_lock_irqsave(&au1300_vss_lock, flags); + if (enable) + __enable_block(block); + else + __disable_block(block); + spin_unlock_irqrestore(&au1300_vss_lock, flags); +} +EXPORT_SYMBOL_GPL(au1300_vss_block_control); diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile index 826449c817c3..3c37fb303364 100644 --- a/arch/mips/alchemy/devboards/Makefile +++ b/arch/mips/alchemy/devboards/Makefile @@ -4,15 +4,10 @@ obj-y += prom.o bcsr.o platform.o obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_MIPS_PB1000) += pb1000/ -obj-$(CONFIG_MIPS_PB1100) += pb1100/ -obj-$(CONFIG_MIPS_PB1200) += pb1200/ -obj-$(CONFIG_MIPS_PB1500) += pb1500/ -obj-$(CONFIG_MIPS_PB1550) += pb1550/ -obj-$(CONFIG_MIPS_DB1000) += db1x00/ -obj-$(CONFIG_MIPS_DB1100) += db1x00/ -obj-$(CONFIG_MIPS_DB1200) += db1200/ -obj-$(CONFIG_MIPS_DB1500) += db1x00/ -obj-$(CONFIG_MIPS_DB1550) += db1x00/ -obj-$(CONFIG_MIPS_BOSPORUS) += db1x00/ -obj-$(CONFIG_MIPS_MIRAGE) += db1x00/ +obj-$(CONFIG_MIPS_PB1100) += pb1100.o +obj-$(CONFIG_MIPS_PB1500) += pb1500.o +obj-$(CONFIG_MIPS_PB1550) += pb1550.o +obj-$(CONFIG_MIPS_DB1000) += db1000.o +obj-$(CONFIG_MIPS_DB1200) += db1200.o +obj-$(CONFIG_MIPS_DB1300) += db1300.o +obj-$(CONFIG_MIPS_DB1550) += db1550.o diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c index 463d2c4d9441..1e83ce2e1147 100644 --- a/arch/mips/alchemy/devboards/bcsr.c +++ b/arch/mips/alchemy/devboards/bcsr.c @@ -97,14 +97,9 @@ static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d) enable_irq(irq); } -/* NOTE: both the enable and mask bits must be cleared, otherwise the - * CPLD generates tons of spurious interrupts (at least on my DB1200). - * -- mlau - */ static void bcsr_irq_mask(struct irq_data *d) { unsigned short v = 1 << (d->irq - bcsr_csc_base); - __raw_writew(v, bcsr_virt + BCSR_REG_INTCLR); __raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR); wmb(); } @@ -112,7 +107,6 @@ static void bcsr_irq_mask(struct irq_data *d) static void bcsr_irq_maskack(struct irq_data *d) { unsigned short v = 1 << (d->irq - bcsr_csc_base); - __raw_writew(v, bcsr_virt + BCSR_REG_INTCLR); __raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR); __raw_writew(v, bcsr_virt + BCSR_REG_INTSTAT); /* ack */ wmb(); @@ -121,7 +115,6 @@ static void bcsr_irq_maskack(struct irq_data *d) static void bcsr_irq_unmask(struct irq_data *d) { unsigned short v = 1 << (d->irq - bcsr_csc_base); - __raw_writew(v, bcsr_virt + BCSR_REG_INTSET); __raw_writew(v, bcsr_virt + BCSR_REG_MASKSET); wmb(); } @@ -137,9 +130,9 @@ void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq) { unsigned int irq; - /* mask & disable & ack all */ - __raw_writew(0xffff, bcsr_virt + BCSR_REG_INTCLR); + /* mask & enable & ack all */ __raw_writew(0xffff, bcsr_virt + BCSR_REG_MASKCLR); + __raw_writew(0xffff, bcsr_virt + BCSR_REG_INTSET); __raw_writew(0xffff, bcsr_virt + BCSR_REG_INTSTAT); wmb(); diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c new file mode 100644 index 000000000000..1b81dbf6b804 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1000.c @@ -0,0 +1,565 @@ +/* + * DBAu1000/1500/1100 board support + * + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "platform.h" + +#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT) + +struct pci_dev; + +static const char *board_type_str(void) +{ + switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { + case BCSR_WHOAMI_DB1000: + return "DB1000"; + case BCSR_WHOAMI_DB1500: + return "DB1500"; + case BCSR_WHOAMI_DB1100: + return "DB1100"; + default: + return "(unknown)"; + } +} + +const char *get_system_type(void) +{ + return board_type_str(); +} + +void __init board_setup(void) +{ + /* initialize board register space */ + bcsr_init(DB1000_BCSR_PHYS_ADDR, + DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); + + printk(KERN_INFO "AMD Alchemy %s Board\n", board_type_str()); +} + + +static int db1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata db1500_pci_pd = { + .board_map_irq = db1500_map_pci_irq, +}; + +static struct platform_device db1500_pci_host_dev = { + .dev.platform_data = &db1500_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + +static int __init db1500_pci_init(void) +{ + if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1500) + return platform_device_register(&db1500_pci_host_dev); + return 0; +} +/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ +arch_initcall(db1500_pci_init); + + +static struct resource au1100_lcd_resources[] = { + [0] = { + .start = AU1100_LCD_PHYS_ADDR, + .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_LCD_INT, + .end = AU1100_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device au1100_lcd_device = { + .name = "au1100-lcd", + .id = 0, + .dev = { + .dma_mask = &au1100_lcd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(au1100_lcd_resources), + .resource = au1100_lcd_resources, +}; + +static struct resource alchemy_ac97c_res[] = { + [0] = { + .start = AU1000_AC97_PHYS_ADDR, + .end = AU1000_AC97_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMA_ID_AC97C_TX, + .end = DMA_ID_AC97C_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMA_ID_AC97C_RX, + .end = DMA_ID_AC97C_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device alchemy_ac97c_dev = { + .name = "alchemy-ac97c", + .id = -1, + .resource = alchemy_ac97c_res, + .num_resources = ARRAY_SIZE(alchemy_ac97c_res), +}; + +static struct platform_device alchemy_ac97c_dma_dev = { + .name = "alchemy-pcm-dma", + .id = 0, +}; + +static struct platform_device db1x00_codec_dev = { + .name = "ac97-codec", + .id = -1, +}; + +static struct platform_device db1x00_audio_dev = { + .name = "db1000-audio", +}; + +/******************************************************************************/ + +static irqreturn_t db1100_mmc_cd(int irq, void *ptr) +{ + void (*mmc_cd)(struct mmc_host *, unsigned long); + /* link against CONFIG_MMC=m */ + mmc_cd = symbol_get(mmc_detect_change); + mmc_cd(ptr, msecs_to_jiffies(500)); + symbol_put(mmc_detect_change); + + return IRQ_HANDLED; +} + +static int db1100_mmc_cd_setup(void *mmc_host, int en) +{ + int ret = 0; + + if (en) { + irq_set_irq_type(AU1100_GPIO19_INT, IRQ_TYPE_EDGE_BOTH); + ret = request_irq(AU1100_GPIO19_INT, db1100_mmc_cd, 0, + "sd0_cd", mmc_host); + } else + free_irq(AU1100_GPIO19_INT, mmc_host); + return ret; +} + +static int db1100_mmc1_cd_setup(void *mmc_host, int en) +{ + int ret = 0; + + if (en) { + irq_set_irq_type(AU1100_GPIO20_INT, IRQ_TYPE_EDGE_BOTH); + ret = request_irq(AU1100_GPIO20_INT, db1100_mmc_cd, 0, + "sd1_cd", mmc_host); + } else + free_irq(AU1100_GPIO20_INT, mmc_host); + return ret; +} + +static int db1100_mmc_card_readonly(void *mmc_host) +{ + /* testing suggests that this bit is inverted */ + return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 0 : 1; +} + +static int db1100_mmc_card_inserted(void *mmc_host) +{ + return !alchemy_gpio_get_value(19); +} + +static void db1100_mmc_set_power(void *mmc_host, int state) +{ + if (state) { + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR); + msleep(400); /* stabilization time */ + } else + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0); +} + +static void db1100_mmcled_set(struct led_classdev *led, enum led_brightness b) +{ + if (b != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); +} + +static struct led_classdev db1100_mmc_led = { + .brightness_set = db1100_mmcled_set, +}; + +static int db1100_mmc1_card_readonly(void *mmc_host) +{ + return (bcsr_read(BCSR_BOARD) & BCSR_BOARD_SD1WP) ? 1 : 0; +} + +static int db1100_mmc1_card_inserted(void *mmc_host) +{ + return !alchemy_gpio_get_value(20); +} + +static void db1100_mmc1_set_power(void *mmc_host, int state) +{ + if (state) { + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR); + msleep(400); /* stabilization time */ + } else + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0); +} + +static void db1100_mmc1led_set(struct led_classdev *led, enum led_brightness b) +{ + if (b != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1); +} + +static struct led_classdev db1100_mmc1_led = { + .brightness_set = db1100_mmc1led_set, +}; + +static struct au1xmmc_platform_data db1100_mmc_platdata[2] = { + [0] = { + .cd_setup = db1100_mmc_cd_setup, + .set_power = db1100_mmc_set_power, + .card_inserted = db1100_mmc_card_inserted, + .card_readonly = db1100_mmc_card_readonly, + .led = &db1100_mmc_led, + }, + [1] = { + .cd_setup = db1100_mmc1_cd_setup, + .set_power = db1100_mmc1_set_power, + .card_inserted = db1100_mmc1_card_inserted, + .card_readonly = db1100_mmc1_card_readonly, + .led = &db1100_mmc1_led, + }, +}; + +static struct resource au1100_mmc0_resources[] = { + [0] = { + .start = AU1100_SD0_PHYS_ADDR, + .end = AU1100_SD0_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_SD_INT, + .end = AU1100_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DMA_ID_SD0_TX, + .end = DMA_ID_SD0_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DMA_ID_SD0_RX, + .end = DMA_ID_SD0_RX, + .flags = IORESOURCE_DMA, + } +}; + +static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); + +static struct platform_device db1100_mmc0_dev = { + .name = "au1xxx-mmc", + .id = 0, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1100_mmc_platdata[0], + }, + .num_resources = ARRAY_SIZE(au1100_mmc0_resources), + .resource = au1100_mmc0_resources, +}; + +static struct resource au1100_mmc1_res[] = { + [0] = { + .start = AU1100_SD1_PHYS_ADDR, + .end = AU1100_SD1_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_SD_INT, + .end = AU1100_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DMA_ID_SD1_TX, + .end = DMA_ID_SD1_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DMA_ID_SD1_RX, + .end = DMA_ID_SD1_RX, + .flags = IORESOURCE_DMA, + } +}; + +static struct platform_device db1100_mmc1_dev = { + .name = "au1xxx-mmc", + .id = 1, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1100_mmc_platdata[1], + }, + .num_resources = ARRAY_SIZE(au1100_mmc1_res), + .resource = au1100_mmc1_res, +}; + +/******************************************************************************/ + +static void db1000_irda_set_phy_mode(int mode) +{ + unsigned short mask = BCSR_RESETS_IRDA_MODE_MASK | BCSR_RESETS_FIR_SEL; + + switch (mode) { + case AU1000_IRDA_PHY_MODE_OFF: + bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_OFF); + break; + case AU1000_IRDA_PHY_MODE_SIR: + bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_FULL); + break; + case AU1000_IRDA_PHY_MODE_FIR: + bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_FULL | + BCSR_RESETS_FIR_SEL); + break; + } +} + +static struct au1k_irda_platform_data db1000_irda_platdata = { + .set_phy_mode = db1000_irda_set_phy_mode, +}; + +static struct resource au1000_irda_res[] = { + [0] = { + .start = AU1000_IRDA_PHYS_ADDR, + .end = AU1000_IRDA_PHYS_ADDR + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1000_IRDA_TX_INT, + .end = AU1000_IRDA_TX_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1000_IRDA_RX_INT, + .end = AU1000_IRDA_RX_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device db1000_irda_dev = { + .name = "au1000-irda", + .id = -1, + .dev = { + .platform_data = &db1000_irda_platdata, + }, + .resource = au1000_irda_res, + .num_resources = ARRAY_SIZE(au1000_irda_res), +}; + +/******************************************************************************/ + +static struct ads7846_platform_data db1100_touch_pd = { + .model = 7846, + .vref_mv = 3300, + .gpio_pendown = 21, +}; + +static struct spi_gpio_platform_data db1100_spictl_pd = { + .sck = 209, + .mosi = 208, + .miso = 207, + .num_chipselect = 1, +}; + +static struct spi_board_info db1100_spi_info[] __initdata = { + [0] = { + .modalias = "ads7846", + .max_speed_hz = 3250000, + .bus_num = 0, + .chip_select = 0, + .mode = 0, + .irq = AU1100_GPIO21_INT, + .platform_data = &db1100_touch_pd, + .controller_data = (void *)210, /* for spi_gpio: CS# GPIO210 */ + }, +}; + +static struct platform_device db1100_spi_dev = { + .name = "spi_gpio", + .id = 0, + .dev = { + .platform_data = &db1100_spictl_pd, + }, +}; + + +static struct platform_device *db1x00_devs[] = { + &db1x00_codec_dev, + &alchemy_ac97c_dma_dev, + &alchemy_ac97c_dev, + &db1x00_audio_dev, +}; + +static struct platform_device *db1000_devs[] = { + &db1000_irda_dev, +}; + +static struct platform_device *db1100_devs[] = { + &au1100_lcd_device, + &db1100_mmc0_dev, + &db1100_mmc1_dev, + &db1000_irda_dev, + &db1100_spi_dev, +}; + +static int __init db1000_dev_init(void) +{ + int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); + int c0, c1, d0, d1, s0, s1; + unsigned long pfc; + + if (board == BCSR_WHOAMI_DB1500) { + c0 = AU1500_GPIO2_INT; + c1 = AU1500_GPIO5_INT; + d0 = AU1500_GPIO0_INT; + d1 = AU1500_GPIO3_INT; + s0 = AU1500_GPIO1_INT; + s1 = AU1500_GPIO4_INT; + } else if (board == BCSR_WHOAMI_DB1100) { + c0 = AU1100_GPIO2_INT; + c1 = AU1100_GPIO5_INT; + d0 = AU1100_GPIO0_INT; + d1 = AU1100_GPIO3_INT; + s0 = AU1100_GPIO1_INT; + s1 = AU1100_GPIO4_INT; + + gpio_direction_input(19); /* sd0 cd# */ + gpio_direction_input(20); /* sd1 cd# */ + gpio_direction_input(21); /* touch pendown# */ + gpio_direction_input(207); /* SPI MISO */ + gpio_direction_output(208, 0); /* SPI MOSI */ + gpio_direction_output(209, 1); /* SPI SCK */ + gpio_direction_output(210, 1); /* SPI CS# */ + + /* spi_gpio on SSI0 pins */ + pfc = __raw_readl((void __iomem *)SYS_PINFUNC); + pfc |= (1 << 0); /* SSI0 pins as GPIOs */ + __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); + wmb(); + + spi_register_board_info(db1100_spi_info, + ARRAY_SIZE(db1100_spi_info)); + + platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs)); + } else if (board == BCSR_WHOAMI_DB1000) { + c0 = AU1000_GPIO2_INT; + c1 = AU1000_GPIO5_INT; + d0 = AU1000_GPIO0_INT; + d1 = AU1000_GPIO3_INT; + s0 = AU1000_GPIO1_INT; + s1 = AU1000_GPIO4_INT; + platform_add_devices(db1000_devs, ARRAY_SIZE(db1000_devs)); + } else + return 0; /* unknown board, no further dev setup to do */ + + irq_set_irq_type(d0, IRQ_TYPE_EDGE_BOTH); + irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH); + irq_set_irq_type(c0, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(c1, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(s0, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(s1, IRQ_TYPE_LEVEL_LOW); + + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + c0, d0, /*s0*/0, 0, 0); + + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, + c1, d1, /*s1*/0, 0, 1); + + platform_add_devices(db1x00_devs, ARRAY_SIZE(db1x00_devs)); + db1x_register_norflash(32 << 20, 4 /* 32bit */, F_SWAPPED); + return 0; +} +device_initcall(db1000_dev_init); diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200.c similarity index 62% rename from arch/mips/alchemy/devboards/db1200/platform.c rename to arch/mips/alchemy/devboards/db1200.c index 78459c17c628..a83302b96c01 100644 --- a/arch/mips/alchemy/devboards/db1200/platform.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -1,7 +1,7 @@ /* - * DBAu1200 board platform device registration + * DBAu1200/PBAu1200 board platform device registration * - * Copyright (C) 2008-2009 Manuel Lauss + * Copyright (C) 2008-2011 Manuel Lauss * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -33,18 +34,116 @@ #include #include #include - +#include #include #include +#include #include #include #include -#include "../platform.h" +#include "platform.h" + +static const char *board_type_str(void) +{ + switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { + case BCSR_WHOAMI_PB1200_DDR1: + case BCSR_WHOAMI_PB1200_DDR2: + return "PB1200"; + case BCSR_WHOAMI_DB1200: + return "DB1200"; + default: + return "(unknown)"; + } +} + +const char *get_system_type(void) +{ + return board_type_str(); +} + +static int __init detect_board(void) +{ + int bid; + + /* try the DB1200 first */ + bcsr_init(DB1200_BCSR_PHYS_ADDR, + DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); + if (BCSR_WHOAMI_DB1200 == BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { + unsigned short t = bcsr_read(BCSR_HEXLEDS); + bcsr_write(BCSR_HEXLEDS, ~t); + if (bcsr_read(BCSR_HEXLEDS) != t) { + bcsr_write(BCSR_HEXLEDS, t); + return 0; + } + } + + /* okay, try the PB1200 then */ + bcsr_init(PB1200_BCSR_PHYS_ADDR, + PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); + bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); + if ((bid == BCSR_WHOAMI_PB1200_DDR1) || + (bid == BCSR_WHOAMI_PB1200_DDR2)) { + unsigned short t = bcsr_read(BCSR_HEXLEDS); + bcsr_write(BCSR_HEXLEDS, ~t); + if (bcsr_read(BCSR_HEXLEDS) != t) { + bcsr_write(BCSR_HEXLEDS, t); + return 0; + } + } + + return 1; /* it's neither */ +} + +void __init board_setup(void) +{ + unsigned long freq0, clksrc, div, pfc; + unsigned short whoami; + + if (detect_board()) { + printk(KERN_ERR "NOT running on a DB1200/PB1200 board!\n"); + return; + } + + whoami = bcsr_read(BCSR_WHOAMI); + printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d" + " Board-ID %d Daughtercard ID %d\n", board_type_str(), + (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); + + /* SMBus/SPI on PSC0, Audio on PSC1 */ + pfc = __raw_readl((void __iomem *)SYS_PINFUNC); + pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); + pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); + pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ + __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); + wmb(); + + /* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from + * CPU clock; all other clock generators off/unused. + */ + div = (get_au1x00_speed() + 25000000) / 50000000; + if (div & 1) + div++; + div = ((div >> 1) - 1) & 0xff; + + freq0 = div << SYS_FC_FRDIV0_BIT; + __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); + wmb(); + freq0 |= SYS_FC_FE0; /* enable F0 */ + __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); + wmb(); + + /* psc0_intclk comes 1:1 from F0 */ + clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT; + __raw_writel(clksrc, (void __iomem *)SYS_CLKSRC); + wmb(); +} + +/******************************************************************************/ static struct mtd_partition db1200_spiflash_parts[] = { { - .name = "DB1200 SPI flash", + .name = "spi_flash", .offset = 0, .size = MTDPART_SIZ_FULL, }, @@ -78,18 +177,9 @@ static struct spi_board_info db1200_spi_devs[] __initdata = { }; static struct i2c_board_info db1200_i2c_devs[] __initdata = { - { - /* AT24C04-10 I2C eeprom */ - I2C_BOARD_INFO("24c04", 0x52), - }, - { - /* Philips NE1619 temp/voltage sensor (adm1025 drv) */ - I2C_BOARD_INFO("ne1619", 0x2d), - }, - { - /* I2S audio codec WM8731 */ - I2C_BOARD_INFO("wm8731", 0x1b), - }, + { I2C_BOARD_INFO("24c04", 0x52), }, /* AT24C04-10 I2C eeprom */ + { I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */ + { I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec WM8731 */ }; /**********************************************************************/ @@ -206,7 +296,7 @@ static struct platform_device db1200_eth_dev = { static struct resource db1200_ide_res[] = { [0] = { .start = DB1200_IDE_PHYS_ADDR, - .end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1, + .end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -221,13 +311,13 @@ static struct resource db1200_ide_res[] = { }, }; -static u64 ide_dmamask = DMA_BIT_MASK(32); +static u64 au1200_ide_dmamask = DMA_BIT_MASK(32); static struct platform_device db1200_ide_dev = { .name = "au1200-ide", .id = 0, .dev = { - .dma_mask = &ide_dmamask, + .dma_mask = &au1200_ide_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(db1200_ide_res), @@ -236,13 +326,6 @@ static struct platform_device db1200_ide_dev = { /**********************************************************************/ -static struct platform_device db1200_rtc_dev = { - .name = "rtc-au1xxx", - .id = -1, -}; - -/**********************************************************************/ - /* SD carddetects: they're supposed to be edge-triggered, but ack * doesn't seem to work (CPLD Rev 2). Instead, the screaming one * is disabled and its counterpart enabled. The 500ms timeout is @@ -333,12 +416,109 @@ static struct led_classdev db1200_mmc_led = { .brightness_set = db1200_mmcled_set, }; -static struct au1xmmc_platform_data db1200mmc_platdata = { - .cd_setup = db1200_mmc_cd_setup, - .set_power = db1200_mmc_set_power, - .card_inserted = db1200_mmc_card_inserted, - .card_readonly = db1200_mmc_card_readonly, - .led = &db1200_mmc_led, +/* -- */ + +static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr) +{ + void(*mmc_cd)(struct mmc_host *, unsigned long); + + if (irq == PB1200_SD1_INSERT_INT) { + disable_irq_nosync(PB1200_SD1_INSERT_INT); + enable_irq(PB1200_SD1_EJECT_INT); + } else { + disable_irq_nosync(PB1200_SD1_EJECT_INT); + enable_irq(PB1200_SD1_INSERT_INT); + } + + /* link against CONFIG_MMC=m */ + mmc_cd = symbol_get(mmc_detect_change); + if (mmc_cd) { + mmc_cd(ptr, msecs_to_jiffies(500)); + symbol_put(mmc_detect_change); + } + + return IRQ_HANDLED; +} + +static int pb1200_mmc1_cd_setup(void *mmc_host, int en) +{ + int ret; + + if (en) { + ret = request_irq(PB1200_SD1_INSERT_INT, pb1200_mmc1_cd, 0, + "sd1_insert", mmc_host); + if (ret) + goto out; + + ret = request_irq(PB1200_SD1_EJECT_INT, pb1200_mmc1_cd, 0, + "sd1_eject", mmc_host); + if (ret) { + free_irq(PB1200_SD1_INSERT_INT, mmc_host); + goto out; + } + + if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) + enable_irq(PB1200_SD1_EJECT_INT); + else + enable_irq(PB1200_SD1_INSERT_INT); + + } else { + free_irq(PB1200_SD1_INSERT_INT, mmc_host); + free_irq(PB1200_SD1_EJECT_INT, mmc_host); + } + ret = 0; +out: + return ret; +} + +static void pb1200_mmc1led_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1); +} + +static struct led_classdev pb1200_mmc1_led = { + .brightness_set = pb1200_mmc1led_set, +}; + +static void pb1200_mmc1_set_power(void *mmc_host, int state) +{ + if (state) { + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR); + msleep(400); /* stabilization time */ + } else + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0); +} + +static int pb1200_mmc1_card_readonly(void *mmc_host) +{ + return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0; +} + +static int pb1200_mmc1_card_inserted(void *mmc_host) +{ + return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0; +} + + +static struct au1xmmc_platform_data db1200_mmc_platdata[2] = { + [0] = { + .cd_setup = db1200_mmc_cd_setup, + .set_power = db1200_mmc_set_power, + .card_inserted = db1200_mmc_card_inserted, + .card_readonly = db1200_mmc_card_readonly, + .led = &db1200_mmc_led, + }, + [1] = { + .cd_setup = pb1200_mmc1_cd_setup, + .set_power = pb1200_mmc1_set_power, + .card_inserted = pb1200_mmc1_card_inserted, + .card_readonly = pb1200_mmc1_card_readonly, + .led = &pb1200_mmc1_led, + }, }; static struct resource au1200_mmc0_resources[] = { @@ -372,14 +552,76 @@ static struct platform_device db1200_mmc0_dev = { .dev = { .dma_mask = &au1xxx_mmc_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &db1200mmc_platdata, + .platform_data = &db1200_mmc_platdata[0], }, .num_resources = ARRAY_SIZE(au1200_mmc0_resources), .resource = au1200_mmc0_resources, }; +static struct resource au1200_mmc1_res[] = { + [0] = { + .start = AU1100_SD1_PHYS_ADDR, + .end = AU1100_SD1_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1200_DSCR_CMD0_SDMS_TX1, + .end = AU1200_DSCR_CMD0_SDMS_TX1, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1200_DSCR_CMD0_SDMS_RX1, + .end = AU1200_DSCR_CMD0_SDMS_RX1, + .flags = IORESOURCE_DMA, + } +}; + +static struct platform_device pb1200_mmc1_dev = { + .name = "au1xxx-mmc", + .id = 1, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1200_mmc_platdata[1], + }, + .num_resources = ARRAY_SIZE(au1200_mmc1_res), + .resource = au1200_mmc1_res, +}; + /**********************************************************************/ +static int db1200fb_panel_index(void) +{ + return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; +} + +static int db1200fb_panel_init(void) +{ + /* Apply power */ + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL); + return 0; +} + +static int db1200fb_panel_shutdown(void) +{ + /* Remove power */ + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL, 0); + return 0; +} + +static struct au1200fb_platdata db1200fb_pd = { + .panel_index = db1200fb_panel_index, + .panel_init = db1200fb_panel_init, + .panel_shutdown = db1200fb_panel_shutdown, +}; + static struct resource au1200_lcd_res[] = { [0] = { .start = AU1200_LCD_PHYS_ADDR, @@ -401,6 +643,7 @@ static struct platform_device au1200_lcd_dev = { .dev = { .dma_mask = &au1200_lcd_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1200fb_pd, }, .num_resources = ARRAY_SIZE(au1200_lcd_res), .resource = au1200_lcd_res, @@ -519,7 +762,6 @@ static struct platform_device *db1200_devs[] __initdata = { &db1200_mmc0_dev, &au1200_lcd_dev, &db1200_eth_dev, - &db1200_rtc_dev, &db1200_nand_dev, &db1200_audiodma_dev, &db1200_audio_dev, @@ -527,11 +769,62 @@ static struct platform_device *db1200_devs[] __initdata = { &db1200_sound_dev, }; +static struct platform_device *pb1200_devs[] __initdata = { + &pb1200_mmc1_dev, +}; + +/* Some peripheral base addresses differ on the PB1200 */ +static int __init pb1200_res_fixup(void) +{ + /* CPLD Revs earlier than 4 cause problems */ + if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "PB1200 must be at CPLD rev 4. Please have\n"); + printk(KERN_ERR "the board updated to latest revisions.\n"); + printk(KERN_ERR "This software will not work reliably\n"); + printk(KERN_ERR "on anything older than CPLD rev 4.!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + return 1; + } + + db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR; + db1200_nand_res[0].end = PB1200_NAND_PHYS_ADDR + 0xff; + db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR; + db1200_ide_res[0].end = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1; + db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR; + db1200_eth_res[0].end = PB1200_ETH_PHYS_ADDR + 0xff; + return 0; +} + static int __init db1200_dev_init(void) { unsigned long pfc; unsigned short sw; - int swapped; + int swapped, bid; + + bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); + if ((bid == BCSR_WHOAMI_PB1200_DDR1) || + (bid == BCSR_WHOAMI_PB1200_DDR2)) { + if (pb1200_res_fixup()) + return -ENODEV; + } + + /* GPIO7 is low-level triggered CPLD cascade */ + irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW); + bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); + + /* insert/eject pairs: one of both is always screaming. To avoid + * issues they must not be automatically enabled when initially + * requested. + */ + irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN); i2c_register_board_info(0, db1200_i2c_devs, ARRAY_SIZE(db1200_i2c_devs)); @@ -540,6 +833,7 @@ static int __init db1200_dev_init(void) /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI) * S6.7 AC97/I2S selector (OFF=AC97 ON=I2S) + * or S12 on the PB1200. */ /* NOTE: GPIO215 controls OTG VBUS supply. In SPI mode however @@ -554,7 +848,7 @@ static int __init db1200_dev_init(void) gpio_request(215, "otg-vbus"); gpio_direction_output(215, 1); - printk(KERN_INFO "DB1200 device configuration:\n"); + printk(KERN_INFO "%s device configuration:\n", board_type_str()); sw = bcsr_read(BCSR_SWITCHES); if (sw & BCSR_SWITCHES_DIP_8) { @@ -595,7 +889,7 @@ static int __init db1200_dev_init(void) /* Audio PSC clock is supplied externally. (FIXME: platdata!!) */ __raw_writel(PSC_SEL_CLK_SERCLK, - (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); + (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); wmb(); db1x_register_pcmcia_socket( @@ -621,28 +915,13 @@ static int __init db1200_dev_init(void) swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; db1x_register_norflash(64 << 20, 2, swapped); - return platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs)); + platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs)); + + /* PB1200 is a DB1200 with a 2nd MMC and Camera connector */ + if ((bid == BCSR_WHOAMI_PB1200_DDR1) || + (bid == BCSR_WHOAMI_PB1200_DDR2)) + platform_add_devices(pb1200_devs, ARRAY_SIZE(pb1200_devs)); + + return 0; } device_initcall(db1200_dev_init); - -/* au1200fb calls these: STERBT EINEN TRAGISCHEN TOD!!! */ -int board_au1200fb_panel(void) -{ - return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; -} - -int board_au1200fb_panel_init(void) -{ - /* Apply power */ - bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL); - return 0; -} - -int board_au1200fb_panel_shutdown(void) -{ - /* Remove power */ - bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL, 0); - return 0; -} diff --git a/arch/mips/alchemy/devboards/db1200/Makefile b/arch/mips/alchemy/devboards/db1200/Makefile deleted file mode 100644 index 17840a5e2738..000000000000 --- a/arch/mips/alchemy/devboards/db1200/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y += setup.o platform.o diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c deleted file mode 100644 index 4a8980027ecf..000000000000 --- a/arch/mips/alchemy/devboards/db1200/setup.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Alchemy/AMD/RMI DB1200 board setup. - * - * Licensed under the terms outlined in the file COPYING in the root of - * this source archive. - */ - -#include -#include -#include -#include -#include -#include -#include - -const char *get_system_type(void) -{ - return "Alchemy Db1200"; -} - -void __init board_setup(void) -{ - unsigned long freq0, clksrc, div, pfc; - unsigned short whoami; - - bcsr_init(DB1200_BCSR_PHYS_ADDR, - DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); - - whoami = bcsr_read(BCSR_WHOAMI); - printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d" - " Board-ID %d Daughtercard ID %d\n", - (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); - - /* SMBus/SPI on PSC0, Audio on PSC1 */ - pfc = __raw_readl((void __iomem *)SYS_PINFUNC); - pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); - pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); - pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ - __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); - wmb(); - - /* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from - * CPU clock; all other clock generators off/unused. - */ - div = (get_au1x00_speed() + 25000000) / 50000000; - if (div & 1) - div++; - div = ((div >> 1) - 1) & 0xff; - - freq0 = div << SYS_FC_FRDIV0_BIT; - __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); - wmb(); - freq0 |= SYS_FC_FE0; /* enable F0 */ - __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); - wmb(); - - /* psc0_intclk comes 1:1 from F0 */ - clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT; - __raw_writel(clksrc, (void __iomem *)SYS_CLKSRC); - wmb(); -} - -static int __init db1200_arch_init(void) -{ - /* GPIO7 is low-level triggered CPLD cascade */ - irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); - bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); - - /* insert/eject pairs: one of both is always screaming. To avoid - * issues they must not be automatically enabled when initially - * requested. - */ - irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN); - irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN); - irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN); - irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN); - irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN); - irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN); - return 0; -} -arch_initcall(db1200_arch_init); diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c new file mode 100644 index 000000000000..0893f2af0d01 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1300.c @@ -0,0 +1,785 @@ +/* + * DBAu1300 init and platform device setup. + * + * (c) 2009 Manuel Lauss + */ + +#include +#include +#include +#include +#include /* KEY_* codes */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "platform.h" + +static struct i2c_board_info db1300_i2c_devs[] __initdata = { + { I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec */ + { I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */ +}; + +/* multifunction pins to assign to GPIO controller */ +static int db1300_gpio_pins[] __initdata = { + AU1300_PIN_LCDPWM0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_WAKE1, + AU1300_PIN_WAKE2, AU1300_PIN_WAKE3, AU1300_PIN_FG3AUX, + AU1300_PIN_EXTCLK1, + -1, /* terminator */ +}; + +/* multifunction pins to assign to device functions */ +static int db1300_dev_pins[] __initdata = { + /* wake-from-str pins 0-3 */ + AU1300_PIN_WAKE0, + /* external clock sources for PSC0 */ + AU1300_PIN_EXTCLK0, + /* 8bit MMC interface on SD0: 6-9 */ + AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6, + AU1300_PIN_SD0DAT7, + /* UART1 pins: 11-18 */ + AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR, + AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR, + AU1300_PIN_U1RX, AU1300_PIN_U1TX, + /* UART0 pins: 19-24 */ + AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR, + AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR, + /* UART2: 25-26 */ + AU1300_PIN_U2RX, AU1300_PIN_U2TX, + /* UART3: 27-28 */ + AU1300_PIN_U3RX, AU1300_PIN_U3TX, + /* LCD controller PWMs, ext pixclock: 30-31 */ + AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN, + /* SD1 interface: 32-37 */ + AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2, + AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK, + /* SD2 interface: 38-43 */ + AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2, + AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK, + /* PSC0/1 clocks: 44-45 */ + AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK, + /* PSCs: 46-49/50-53/54-57/58-61 */ + AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0, + AU1300_PIN_PSC0D1, + AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0, + AU1300_PIN_PSC1D1, + AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2D0, + AU1300_PIN_PSC2D1, + AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0, + AU1300_PIN_PSC3D1, + /* PCMCIA interface: 62-70 */ + AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16, + AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT, + AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW, + /* camera interface H/V sync inputs: 71-72 */ + AU1300_PIN_CIMLS, AU1300_PIN_CIMFS, + /* PSC2/3 clocks: 73-74 */ + AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK, + -1, /* terminator */ +}; + +static void __init db1300_gpio_config(void) +{ + int *i; + + i = &db1300_dev_pins[0]; + while (*i != -1) + au1300_pinfunc_to_dev(*i++); + + i = &db1300_gpio_pins[0]; + while (*i != -1) + au1300_gpio_direction_input(*i++);/* implies pin_to_gpio */ + + au1300_set_dbdma_gpio(1, AU1300_PIN_FG3AUX); +} + +char *get_system_type(void) +{ + return "DB1300"; +} + +/**********************************************************************/ + +static void au1300_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long ioaddr = (unsigned long)this->IO_ADDR_W; + + ioaddr &= 0xffffff00; + + if (ctrl & NAND_CLE) { + ioaddr += MEM_STNAND_CMD; + } else if (ctrl & NAND_ALE) { + ioaddr += MEM_STNAND_ADDR; + } else { + /* assume we want to r/w real data by default */ + ioaddr += MEM_STNAND_DATA; + } + this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr; + if (cmd != NAND_CMD_NONE) { + __raw_writeb(cmd, this->IO_ADDR_W); + wmb(); + } +} + +static int au1300_nand_device_ready(struct mtd_info *mtd) +{ + return __raw_readl((void __iomem *)MEM_STSTAT) & 1; +} + +static const char *db1300_part_probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition db1300_nand_parts[] = { + { + .name = "NAND FS 0", + .offset = 0, + .size = 8 * 1024 * 1024, + }, + { + .name = "NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, +}; + +struct platform_nand_data db1300_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(db1300_nand_parts), + .partitions = db1300_nand_parts, + .chip_delay = 20, + .part_probe_types = db1300_part_probes, + }, + .ctrl = { + .dev_ready = au1300_nand_device_ready, + .cmd_ctrl = au1300_nand_cmd_ctrl, + }, +}; + +static struct resource db1300_nand_res[] = { + [0] = { + .start = DB1300_NAND_PHYS_ADDR, + .end = DB1300_NAND_PHYS_ADDR + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device db1300_nand_dev = { + .name = "gen_nand", + .num_resources = ARRAY_SIZE(db1300_nand_res), + .resource = db1300_nand_res, + .id = -1, + .dev = { + .platform_data = &db1300_nand_platdata, + } +}; + +/**********************************************************************/ + +static struct resource db1300_eth_res[] = { + [0] = { + .start = DB1300_ETH_PHYS_ADDR, + .end = DB1300_ETH_PHYS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1300_ETH_INT, + .end = DB1300_ETH_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config db1300_eth_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT, +}; + +static struct platform_device db1300_eth_dev = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(db1300_eth_res), + .resource = db1300_eth_res, + .dev = { + .platform_data = &db1300_eth_config, + }, +}; + +/**********************************************************************/ + +static struct resource au1300_psc1_res[] = { + [0] = { + .start = AU1300_PSC1_PHYS_ADDR, + .end = AU1300_PSC1_PHYS_ADDR + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_PSC1_INT, + .end = AU1300_PSC1_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_PSC1_TX, + .end = AU1300_DSCR_CMD0_PSC1_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_PSC1_RX, + .end = AU1300_DSCR_CMD0_PSC1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_ac97_dev = { + .name = "au1xpsc_ac97", + .id = 1, /* PSC ID. match with AC97 codec ID! */ + .num_resources = ARRAY_SIZE(au1300_psc1_res), + .resource = au1300_psc1_res, +}; + +/**********************************************************************/ + +static struct resource au1300_psc2_res[] = { + [0] = { + .start = AU1300_PSC2_PHYS_ADDR, + .end = AU1300_PSC2_PHYS_ADDR + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_PSC2_INT, + .end = AU1300_PSC2_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_PSC2_TX, + .end = AU1300_DSCR_CMD0_PSC2_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_PSC2_RX, + .end = AU1300_DSCR_CMD0_PSC2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_i2s_dev = { + .name = "au1xpsc_i2s", + .id = 2, /* PSC ID */ + .num_resources = ARRAY_SIZE(au1300_psc2_res), + .resource = au1300_psc2_res, +}; + +/**********************************************************************/ + +static struct resource au1300_psc3_res[] = { + [0] = { + .start = AU1300_PSC3_PHYS_ADDR, + .end = AU1300_PSC3_PHYS_ADDR + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_PSC3_INT, + .end = AU1300_PSC3_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_PSC3_TX, + .end = AU1300_DSCR_CMD0_PSC3_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_PSC3_RX, + .end = AU1300_DSCR_CMD0_PSC3_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_i2c_dev = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1300_psc3_res), + .resource = au1300_psc3_res, +}; + +/**********************************************************************/ + +/* proper key assignments when facing the LCD panel. For key assignments + * according to the schematics swap up with down and left with right. + * I chose to use it to emulate the arrow keys of a keyboard. + */ +static struct gpio_keys_button db1300_5waysw_arrowkeys[] = { + { + .code = KEY_DOWN, + .gpio = AU1300_PIN_LCDPWM0, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-down", + }, + { + .code = KEY_UP, + .gpio = AU1300_PIN_PSC2SYNC1, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-up", + }, + { + .code = KEY_RIGHT, + .gpio = AU1300_PIN_WAKE3, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-right", + }, + { + .code = KEY_LEFT, + .gpio = AU1300_PIN_WAKE2, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-left", + }, + { + .code = KEY_ENTER, + .gpio = AU1300_PIN_WAKE1, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-push", + }, +}; + +static struct gpio_keys_platform_data db1300_5waysw_data = { + .buttons = db1300_5waysw_arrowkeys, + .nbuttons = ARRAY_SIZE(db1300_5waysw_arrowkeys), + .rep = 1, + .name = "db1300-5wayswitch", +}; + +static struct platform_device db1300_5waysw_dev = { + .name = "gpio-keys", + .dev = { + .platform_data = &db1300_5waysw_data, + }, +}; + +/**********************************************************************/ + +static struct pata_platform_info db1300_ide_info = { + .ioport_shift = DB1300_IDE_REG_SHIFT, +}; + +#define IDE_ALT_START (14 << DB1300_IDE_REG_SHIFT) +static struct resource db1300_ide_res[] = { + [0] = { + .start = DB1300_IDE_PHYS_ADDR, + .end = DB1300_IDE_PHYS_ADDR + IDE_ALT_START - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1300_IDE_PHYS_ADDR + IDE_ALT_START, + .end = DB1300_IDE_PHYS_ADDR + DB1300_IDE_PHYS_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = DB1300_IDE_INT, + .end = DB1300_IDE_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device db1300_ide_dev = { + .dev = { + .platform_data = &db1300_ide_info, + }, + .name = "pata_platform", + .resource = db1300_ide_res, + .num_resources = ARRAY_SIZE(db1300_ide_res), +}; + +/**********************************************************************/ + +static irqreturn_t db1300_mmc_cd(int irq, void *ptr) +{ + void(*mmc_cd)(struct mmc_host *, unsigned long); + + /* disable the one currently screaming. No other way to shut it up */ + if (irq == DB1300_SD1_INSERT_INT) { + disable_irq_nosync(DB1300_SD1_INSERT_INT); + enable_irq(DB1300_SD1_EJECT_INT); + } else { + disable_irq_nosync(DB1300_SD1_EJECT_INT); + enable_irq(DB1300_SD1_INSERT_INT); + } + + /* link against CONFIG_MMC=m. We can only be called once MMC core has + * initialized the controller, so symbol_get() should always succeed. + */ + mmc_cd = symbol_get(mmc_detect_change); + mmc_cd(ptr, msecs_to_jiffies(500)); + symbol_put(mmc_detect_change); + + return IRQ_HANDLED; +} + +static int db1300_mmc_card_readonly(void *mmc_host) +{ + /* it uses SD1 interface, but the DB1200's SD0 bit in the CPLD */ + return bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP; +} + +static int db1300_mmc_card_inserted(void *mmc_host) +{ + return bcsr_read(BCSR_SIGSTAT) & (1 << 12); /* insertion irq signal */ +} + +static int db1300_mmc_cd_setup(void *mmc_host, int en) +{ + int ret; + + if (en) { + ret = request_irq(DB1300_SD1_INSERT_INT, db1300_mmc_cd, 0, + "sd_insert", mmc_host); + if (ret) + goto out; + + ret = request_irq(DB1300_SD1_EJECT_INT, db1300_mmc_cd, 0, + "sd_eject", mmc_host); + if (ret) { + free_irq(DB1300_SD1_INSERT_INT, mmc_host); + goto out; + } + + if (db1300_mmc_card_inserted(mmc_host)) + enable_irq(DB1300_SD1_EJECT_INT); + else + enable_irq(DB1300_SD1_INSERT_INT); + + } else { + free_irq(DB1300_SD1_INSERT_INT, mmc_host); + free_irq(DB1300_SD1_EJECT_INT, mmc_host); + } + ret = 0; +out: + return ret; +} + +static void db1300_mmcled_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); +} + +static struct led_classdev db1300_mmc_led = { + .brightness_set = db1300_mmcled_set, +}; + +struct au1xmmc_platform_data db1300_sd1_platdata = { + .cd_setup = db1300_mmc_cd_setup, + .card_inserted = db1300_mmc_card_inserted, + .card_readonly = db1300_mmc_card_readonly, + .led = &db1300_mmc_led, +}; + +static struct resource au1300_sd1_res[] = { + [0] = { + .start = AU1300_SD1_PHYS_ADDR, + .end = AU1300_SD1_PHYS_ADDR, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_SD1_INT, + .end = AU1300_SD1_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_SDMS_TX1, + .end = AU1300_DSCR_CMD0_SDMS_TX1, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_SDMS_RX1, + .end = AU1300_DSCR_CMD0_SDMS_RX1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_sd1_dev = { + .dev = { + .platform_data = &db1300_sd1_platdata, + }, + .name = "au1xxx-mmc", + .id = 1, + .resource = au1300_sd1_res, + .num_resources = ARRAY_SIZE(au1300_sd1_res), +}; + +/**********************************************************************/ + +static int db1300_movinand_inserted(void *mmc_host) +{ + return 0; /* disable for now, it doesn't work yet */ +} + +static int db1300_movinand_readonly(void *mmc_host) +{ + return 0; +} + +static void db1300_movinand_led_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1); +} + +static struct led_classdev db1300_movinand_led = { + .brightness_set = db1300_movinand_led_set, +}; + +struct au1xmmc_platform_data db1300_sd0_platdata = { + .card_inserted = db1300_movinand_inserted, + .card_readonly = db1300_movinand_readonly, + .led = &db1300_movinand_led, + .mask_host_caps = MMC_CAP_NEEDS_POLL, +}; + +static struct resource au1300_sd0_res[] = { + [0] = { + .start = AU1100_SD0_PHYS_ADDR, + .end = AU1100_SD0_PHYS_ADDR, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_SD0_INT, + .end = AU1300_SD0_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_SDMS_TX0, + .end = AU1300_DSCR_CMD0_SDMS_TX0, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_SDMS_RX0, + .end = AU1300_DSCR_CMD0_SDMS_RX0, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_sd0_dev = { + .dev = { + .platform_data = &db1300_sd0_platdata, + }, + .name = "au1xxx-mmc", + .id = 0, + .resource = au1300_sd0_res, + .num_resources = ARRAY_SIZE(au1300_sd0_res), +}; + +/**********************************************************************/ + +static struct platform_device db1300_wm9715_dev = { + .name = "wm9712-codec", + .id = 1, /* ID of PSC for AC97 audio, see asoc glue! */ +}; + +static struct platform_device db1300_ac97dma_dev = { + .name = "au1xpsc-pcm", + .id = 1, /* PSC ID */ +}; + +static struct platform_device db1300_i2sdma_dev = { + .name = "au1xpsc-pcm", + .id = 2, /* PSC ID */ +}; + +static struct platform_device db1300_sndac97_dev = { + .name = "db1300-ac97", +}; + +static struct platform_device db1300_sndi2s_dev = { + .name = "db1300-i2s", +}; + +/**********************************************************************/ + +static int db1300fb_panel_index(void) +{ + return 9; /* DB1300_800x480 */ +} + +static int db1300fb_panel_init(void) +{ + /* Apply power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */ + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD, + BCSR_BOARD_LCDBL); + return 0; +} + +static int db1300fb_panel_shutdown(void) +{ + /* Remove power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */ + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDBL, + BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD); + return 0; +} + +static struct au1200fb_platdata db1300fb_pd = { + .panel_index = db1300fb_panel_index, + .panel_init = db1300fb_panel_init, + .panel_shutdown = db1300fb_panel_shutdown, +}; + +static struct resource au1300_lcd_res[] = { + [0] = { + .start = AU1200_LCD_PHYS_ADDR, + .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_LCD_INT, + .end = AU1300_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1300_lcd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device db1300_lcd_dev = { + .name = "au1200-lcd", + .id = 0, + .dev = { + .dma_mask = &au1300_lcd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1300fb_pd, + }, + .num_resources = ARRAY_SIZE(au1300_lcd_res), + .resource = au1300_lcd_res, +}; + +/**********************************************************************/ + +static struct platform_device *db1300_dev[] __initdata = { + &db1300_eth_dev, + &db1300_i2c_dev, + &db1300_5waysw_dev, + &db1300_nand_dev, + &db1300_ide_dev, + &db1300_sd0_dev, + &db1300_sd1_dev, + &db1300_lcd_dev, + &db1300_ac97_dev, + &db1300_i2s_dev, + &db1300_wm9715_dev, + &db1300_ac97dma_dev, + &db1300_i2sdma_dev, + &db1300_sndac97_dev, + &db1300_sndi2s_dev, +}; + +static int __init db1300_device_init(void) +{ + int swapped, cpldirq; + + /* setup CPLD IRQ muxer */ + cpldirq = au1300_gpio_to_irq(AU1300_PIN_EXTCLK1); + irq_set_irq_type(cpldirq, IRQ_TYPE_LEVEL_HIGH); + bcsr_init_irq(DB1300_FIRST_INT, DB1300_LAST_INT, cpldirq); + + /* insert/eject IRQs: one always triggers so don't enable them + * when doing request_irq() on them. DB1200 has this bug too. + */ + irq_set_status_flags(DB1300_SD1_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1300_SD1_EJECT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1300_CF_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1300_CF_EJECT_INT, IRQ_NOAUTOEN); + + /* + * setup board + */ + prom_get_ethernet_addr(&db1300_eth_config.mac[0]); + + i2c_register_board_info(0, db1300_i2c_devs, + ARRAY_SIZE(db1300_i2c_devs)); + + /* Audio PSC clock is supplied by codecs (PSC1, 2) */ + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(AU1300_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + /* I2C uses internal 48MHz EXTCLK1 */ + __raw_writel(PSC_SEL_CLK_INTCLK, + (void __iomem *)KSEG1ADDR(AU1300_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + + /* enable power to USB ports */ + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_USBHPWR | BCSR_RESETS_OTGPWR); + + /* although it is socket #0, it uses the CPLD bits which previous boards + * have used for socket #1. + */ + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x00400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x00400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x00010000 - 1, + DB1300_CF_INT, DB1300_CF_INSERT_INT, 0, DB1300_CF_EJECT_INT, 1); + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; + db1x_register_norflash(64 << 20, 2, swapped); + + return platform_add_devices(db1300_dev, ARRAY_SIZE(db1300_dev)); +} +device_initcall(db1300_device_init); + + +void __init board_setup(void) +{ + unsigned short whoami; + + db1300_gpio_config(); + bcsr_init(DB1300_BCSR_PHYS_ADDR, + DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS); + + whoami = bcsr_read(BCSR_WHOAMI); + printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t" + "BoardID %d CPLD Rev %d DaughtercardID %d\n", + BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami), + BCSR_WHOAMI_DCID(whoami)); + + /* enable UARTs, YAMON only enables #2 */ + alchemy_uart_enable(AU1300_UART0_PHYS_ADDR); + alchemy_uart_enable(AU1300_UART1_PHYS_ADDR); + alchemy_uart_enable(AU1300_UART3_PHYS_ADDR); +} diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c new file mode 100644 index 000000000000..6815d0783cd8 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1550.c @@ -0,0 +1,498 @@ +/* + * Alchemy Db1550 board support + * + * (c) 2011 Manuel Lauss + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "platform.h" + + +const char *get_system_type(void) +{ + return "DB1550"; +} + +static void __init db1550_hw_setup(void) +{ + void __iomem *base; + + alchemy_gpio_direction_output(203, 0); /* red led on */ + + /* complete SPI setup: link psc0_intclk to a 48MHz source, + * and assign GPIO16 to PSC0_SYNC1 (SPI cs# line) + */ + base = (void __iomem *)SYS_CLKSRC; + __raw_writel(__raw_readl(base) | 0x000001e0, base); + base = (void __iomem *)SYS_PINFUNC; + __raw_writel(__raw_readl(base) | 1, base); + wmb(); + + /* reset the AC97 codec now, the reset time in the psc-ac97 driver + * is apparently too short although it's ridiculous as it is. + */ + base = (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR); + __raw_writel(PSC_SEL_CLK_SERCLK | PSC_SEL_PS_AC97MODE, + base + PSC_SEL_OFFSET); + __raw_writel(PSC_CTRL_DISABLE, base + PSC_CTRL_OFFSET); + wmb(); + __raw_writel(PSC_AC97RST_RST, base + PSC_AC97RST_OFFSET); + wmb(); + + alchemy_gpio_direction_output(202, 0); /* green led on */ +} + +void __init board_setup(void) +{ + unsigned short whoami; + + bcsr_init(DB1550_BCSR_PHYS_ADDR, + DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS); + + whoami = bcsr_read(BCSR_WHOAMI); + printk(KERN_INFO "Alchemy/AMD DB1550 Board, CPLD Rev %d" + " Board-ID %d Daughtercard ID %d\n", + (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); + + db1550_hw_setup(); +} + +/*****************************************************************************/ + +static struct mtd_partition db1550_spiflash_parts[] = { + { + .name = "spi_flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct flash_platform_data db1550_spiflash_data = { + .name = "s25fl010", + .parts = db1550_spiflash_parts, + .nr_parts = ARRAY_SIZE(db1550_spiflash_parts), + .type = "m25p10", +}; + +static struct spi_board_info db1550_spi_devs[] __initdata = { + { + /* TI TMP121AIDBVR temp sensor */ + .modalias = "tmp121", + .max_speed_hz = 2400000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, + { + /* Spansion S25FL001D0FMA SPI flash */ + .modalias = "m25p80", + .max_speed_hz = 2400000, + .bus_num = 0, + .chip_select = 1, + .mode = SPI_MODE_0, + .platform_data = &db1550_spiflash_data, + }, +}; + +static struct i2c_board_info db1550_i2c_devs[] __initdata = { + { I2C_BOARD_INFO("24c04", 0x52),}, /* AT24C04-10 I2C eeprom */ + { I2C_BOARD_INFO("ne1619", 0x2d),}, /* adm1025-compat hwmon */ + { I2C_BOARD_INFO("wm8731", 0x1b),}, /* I2S audio codec WM8731 */ +}; + +/**********************************************************************/ + +static void au1550_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long ioaddr = (unsigned long)this->IO_ADDR_W; + + ioaddr &= 0xffffff00; + + if (ctrl & NAND_CLE) { + ioaddr += MEM_STNAND_CMD; + } else if (ctrl & NAND_ALE) { + ioaddr += MEM_STNAND_ADDR; + } else { + /* assume we want to r/w real data by default */ + ioaddr += MEM_STNAND_DATA; + } + this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr; + if (cmd != NAND_CMD_NONE) { + __raw_writeb(cmd, this->IO_ADDR_W); + wmb(); + } +} + +static int au1550_nand_device_ready(struct mtd_info *mtd) +{ + return __raw_readl((void __iomem *)MEM_STSTAT) & 1; +} + +static const char *db1550_part_probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition db1550_nand_parts[] = { + { + .name = "NAND FS 0", + .offset = 0, + .size = 8 * 1024 * 1024, + }, + { + .name = "NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, +}; + +struct platform_nand_data db1550_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(db1550_nand_parts), + .partitions = db1550_nand_parts, + .chip_delay = 20, + .part_probe_types = db1550_part_probes, + }, + .ctrl = { + .dev_ready = au1550_nand_device_ready, + .cmd_ctrl = au1550_nand_cmd_ctrl, + }, +}; + +static struct resource db1550_nand_res[] = { + [0] = { + .start = 0x20000000, + .end = 0x200000ff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device db1550_nand_dev = { + .name = "gen_nand", + .num_resources = ARRAY_SIZE(db1550_nand_res), + .resource = db1550_nand_res, + .id = -1, + .dev = { + .platform_data = &db1550_nand_platdata, + } +}; + +/**********************************************************************/ + +static struct resource au1550_psc0_res[] = { + [0] = { + .start = AU1550_PSC0_PHYS_ADDR, + .end = AU1550_PSC0_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1550_PSC0_INT, + .end = AU1550_PSC0_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1550_DSCR_CMD0_PSC0_TX, + .end = AU1550_DSCR_CMD0_PSC0_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1550_DSCR_CMD0_PSC0_RX, + .end = AU1550_DSCR_CMD0_PSC0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static void db1550_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol) +{ + if (cs) + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SPISEL); + else + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SPISEL, 0); +} + +static struct au1550_spi_info db1550_spi_platdata = { + .mainclk_hz = 48000000, /* PSC0 clock: max. 2.4MHz SPI clk */ + .num_chipselect = 2, + .activate_cs = db1550_spi_cs_en, +}; + +static u64 spi_dmamask = DMA_BIT_MASK(32); + +static struct platform_device db1550_spi_dev = { + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1550_spi_platdata, + }, + .name = "au1550-spi", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1550_psc0_res), + .resource = au1550_psc0_res, +}; + +/**********************************************************************/ + +static struct resource au1550_psc1_res[] = { + [0] = { + .start = AU1550_PSC1_PHYS_ADDR, + .end = AU1550_PSC1_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1550_PSC1_INT, + .end = AU1550_PSC1_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1550_DSCR_CMD0_PSC1_TX, + .end = AU1550_DSCR_CMD0_PSC1_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1550_DSCR_CMD0_PSC1_RX, + .end = AU1550_DSCR_CMD0_PSC1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1550_ac97_dev = { + .name = "au1xpsc_ac97", + .id = 1, /* PSC ID */ + .num_resources = ARRAY_SIZE(au1550_psc1_res), + .resource = au1550_psc1_res, +}; + + +static struct resource au1550_psc2_res[] = { + [0] = { + .start = AU1550_PSC2_PHYS_ADDR, + .end = AU1550_PSC2_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1550_PSC2_INT, + .end = AU1550_PSC2_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1550_DSCR_CMD0_PSC2_TX, + .end = AU1550_DSCR_CMD0_PSC2_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1550_DSCR_CMD0_PSC2_RX, + .end = AU1550_DSCR_CMD0_PSC2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1550_i2c_dev = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1550_psc2_res), + .resource = au1550_psc2_res, +}; + +/**********************************************************************/ + +static struct resource au1550_psc3_res[] = { + [0] = { + .start = AU1550_PSC3_PHYS_ADDR, + .end = AU1550_PSC3_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1550_PSC3_INT, + .end = AU1550_PSC3_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1550_DSCR_CMD0_PSC3_TX, + .end = AU1550_DSCR_CMD0_PSC3_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1550_DSCR_CMD0_PSC3_RX, + .end = AU1550_DSCR_CMD0_PSC3_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1550_i2s_dev = { + .name = "au1xpsc_i2s", + .id = 3, /* PSC ID */ + .num_resources = ARRAY_SIZE(au1550_psc3_res), + .resource = au1550_psc3_res, +}; + +/**********************************************************************/ + +static struct platform_device db1550_stac_dev = { + .name = "ac97-codec", + .id = 1, /* on PSC1 */ +}; + +static struct platform_device db1550_ac97dma_dev = { + .name = "au1xpsc-pcm", + .id = 1, /* on PSC3 */ +}; + +static struct platform_device db1550_i2sdma_dev = { + .name = "au1xpsc-pcm", + .id = 3, /* on PSC3 */ +}; + +static struct platform_device db1550_sndac97_dev = { + .name = "db1550-ac97", +}; + +static struct platform_device db1550_sndi2s_dev = { + .name = "db1550-i2s", +}; + +/**********************************************************************/ + +static int db1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 11) || (slot > 13) || pin == 0) + return -1; + if (slot == 11) + return (pin == 1) ? AU1550_PCI_INTC : 0xff; + if (slot == 12) { + switch (pin) { + case 1: return AU1550_PCI_INTB; + case 2: return AU1550_PCI_INTC; + case 3: return AU1550_PCI_INTD; + case 4: return AU1550_PCI_INTA; + } + } + if (slot == 13) { + switch (pin) { + case 1: return AU1550_PCI_INTA; + case 2: return AU1550_PCI_INTB; + case 3: return AU1550_PCI_INTC; + case 4: return AU1550_PCI_INTD; + } + } + return -1; +} + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata db1550_pci_pd = { + .board_map_irq = db1550_map_pci_irq, +}; + +static struct platform_device db1550_pci_host_dev = { + .dev.platform_data = &db1550_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + +/**********************************************************************/ + +static struct platform_device *db1550_devs[] __initdata = { + &db1550_nand_dev, + &db1550_i2c_dev, + &db1550_ac97_dev, + &db1550_spi_dev, + &db1550_i2s_dev, + &db1550_stac_dev, + &db1550_ac97dma_dev, + &db1550_i2sdma_dev, + &db1550_sndac97_dev, + &db1550_sndi2s_dev, +}; + +/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ +static int __init db1550_pci_init(void) +{ + return platform_device_register(&db1550_pci_host_dev); +} +arch_initcall(db1550_pci_init); + +static int __init db1550_dev_init(void) +{ + int swapped; + + irq_set_irq_type(AU1550_GPIO0_INT, IRQ_TYPE_EDGE_BOTH); /* CD0# */ + irq_set_irq_type(AU1550_GPIO1_INT, IRQ_TYPE_EDGE_BOTH); /* CD1# */ + irq_set_irq_type(AU1550_GPIO3_INT, IRQ_TYPE_LEVEL_LOW); /* CARD0# */ + irq_set_irq_type(AU1550_GPIO5_INT, IRQ_TYPE_LEVEL_LOW); /* CARD1# */ + irq_set_irq_type(AU1550_GPIO21_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG0# */ + irq_set_irq_type(AU1550_GPIO22_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG1# */ + + i2c_register_board_info(0, db1550_i2c_devs, + ARRAY_SIZE(db1550_i2c_devs)); + spi_register_board_info(db1550_spi_devs, + ARRAY_SIZE(db1550_i2c_devs)); + + /* Audio PSC clock is supplied by codecs (PSC1, 3) FIXME: platdata!! */ + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(AU1550_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + /* SPI/I2C use internally supplied 50MHz source */ + __raw_writel(PSC_SEL_CLK_INTCLK, + (void __iomem *)KSEG1ADDR(AU1550_PSC0_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + __raw_writel(PSC_SEL_CLK_INTCLK, + (void __iomem *)KSEG1ADDR(AU1550_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1550_GPIO3_INT, AU1550_GPIO0_INT, + /*AU1550_GPIO21_INT*/0, 0, 0); + + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, + AU1550_GPIO5_INT, AU1550_GPIO1_INT, + /*AU1550_GPIO22_INT*/0, 0, 1); + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; + db1x_register_norflash(128 << 20, 4, swapped); + + return platform_add_devices(db1550_devs, ARRAY_SIZE(db1550_devs)); +} +device_initcall(db1550_dev_init); diff --git a/arch/mips/alchemy/devboards/db1x00/Makefile b/arch/mips/alchemy/devboards/db1x00/Makefile deleted file mode 100644 index 613c0c0c8be9..000000000000 --- a/arch/mips/alchemy/devboards/db1x00/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# -# Makefile for the Alchemy Semiconductor DBAu1xx0 boards. -# - -obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c deleted file mode 100644 index 7cd36e631f6c..000000000000 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Db1x00 board setup. - * - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -#ifdef CONFIG_MIPS_BOSPORUS -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI */ - [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741 */ - [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ -}; - -/* - * Micrel/Kendin 5 port switch attached to MAC0, - * MAC0 is associated with PHY address 5 (== WAN port) - * MAC1 is not associated with any PHY, since it's connected directly - * to the switch. - * no interrupts are used - */ -static struct au1000_eth_platform_data eth0_pdata = { - .phy_static_config = 1, - .phy_addr = 5, -}; - -static void bosporus_power_off(void) -{ - while (1) - asm volatile (".set mips3 ; wait ; .set mips0"); -} - -const char *get_system_type(void) -{ - return "Alchemy Bosporus Gateway Reference"; -} -#endif - - -#ifdef CONFIG_MIPS_MIRAGE -static void mirage_power_off(void) -{ - alchemy_gpio_direction_output(210, 1); -} - -const char *get_system_type(void) -{ - return "Alchemy Mirage"; -} -#endif - - -#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE) -static void mips_softreset(void) -{ - asm volatile ("jr\t%0" : : "r"(0xbfc00000)); -} - -#else - -const char *get_system_type(void) -{ - return "Alchemy Db1x00"; -} -#endif - - -void __init board_setup(void) -{ - unsigned long bcsr1, bcsr2; - - bcsr1 = DB1000_BCSR_PHYS_ADDR; - bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS; - -#ifdef CONFIG_MIPS_DB1000 - printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1500 - printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1100 - printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); -#endif -#ifdef CONFIG_MIPS_BOSPORUS - au1xxx_override_eth_cfg(0, ð0_pdata); - - printk(KERN_INFO "AMD Alchemy Bosporus Board\n"); -#endif -#ifdef CONFIG_MIPS_MIRAGE - printk(KERN_INFO "AMD Alchemy Mirage Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1550 - printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n"); - - bcsr1 = DB1550_BCSR_PHYS_ADDR; - bcsr2 = DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS; -#endif - - /* initialize board register space */ - bcsr_init(bcsr1, bcsr2); - -#if defined(CONFIG_IRDA) && defined(CONFIG_AU1000_FIR) - { - u32 pin_func; - - /* Set IRFIRSEL instead of GPIO15 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; - au_writel(pin_func, SYS_PINFUNC); - /* Power off until the driver is in use */ - bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, - BCSR_RESETS_IRDA_MODE_OFF); - } -#endif - bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ - - /* Enable GPIO[31:0] inputs */ - alchemy_gpio1_input_enable(); - -#ifdef CONFIG_MIPS_MIRAGE - { - u32 pin_func; - - /* GPIO[20] is output */ - alchemy_gpio_direction_output(20, 0); - - /* Set GPIO[210:208] instead of SSI_0 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; - - /* Set GPIO[215:211] for LEDs */ - pin_func |= 5 << 2; - - /* Set GPIO[214:213] for more LEDs */ - pin_func |= 5 << 12; - - /* Set GPIO[207:200] instead of PCMCIA/LCD */ - pin_func |= SYS_PF_LCD | SYS_PF_PC; - au_writel(pin_func, SYS_PINFUNC); - - /* - * Enable speaker amplifier. This should - * be part of the audio driver. - */ - alchemy_gpio_direction_output(209, 1); - - pm_power_off = mirage_power_off; - _machine_halt = mirage_power_off; - _machine_restart = (void(*)(char *))mips_softreset; - } -#endif - -#ifdef CONFIG_MIPS_BOSPORUS - pm_power_off = bosporus_power_off; - _machine_halt = bosporus_power_off; - _machine_restart = (void(*)(char *))mips_softreset; -#endif - au_sync(); -} - -static int __init db1x00_init_irq(void) -{ -#if defined(CONFIG_MIPS_MIRAGE) - irq_set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */ -#elif defined(CONFIG_MIPS_DB1550) - irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); /* CD1# */ - irq_set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW); /* CARD0# */ - irq_set_irq_type(AU1550_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ - irq_set_irq_type(AU1550_GPIO21_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ - irq_set_irq_type(AU1550_GPIO22_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ -#elif defined(CONFIG_MIPS_DB1500) - irq_set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ - irq_set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ - irq_set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ - irq_set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ - irq_set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ -#elif defined(CONFIG_MIPS_DB1100) - irq_set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ - irq_set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ - irq_set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ - irq_set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ - irq_set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ -#elif defined(CONFIG_MIPS_DB1000) - irq_set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ - irq_set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ - irq_set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ - irq_set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ - irq_set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ -#endif - return 0; -} -arch_initcall(db1x00_init_irq); diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c deleted file mode 100644 index 9e6b3d442acd..000000000000 --- a/arch/mips/alchemy/devboards/db1x00/platform.c +++ /dev/null @@ -1,316 +0,0 @@ -/* - * DBAu1xxx board platform device registration - * - * Copyright (C) 2009 Manuel Lauss - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include - -#include -#include -#include -#include "../platform.h" - -struct pci_dev; - -/* DB1xxx PCMCIA interrupt sources: - * CD0/1 GPIO0/3 - * STSCHG0/1 GPIO1/4 - * CARD0/1 GPIO2/5 - * Db1550: 0/1, 21/22, 3/5 - */ - -#define DB1XXX_HAS_PCMCIA -#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT) - -#if defined(CONFIG_MIPS_DB1000) -#define DB1XXX_PCMCIA_CD0 AU1000_GPIO0_INT -#define DB1XXX_PCMCIA_STSCHG0 AU1000_GPIO1_INT -#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO2_INT -#define DB1XXX_PCMCIA_CD1 AU1000_GPIO3_INT -#define DB1XXX_PCMCIA_STSCHG1 AU1000_GPIO4_INT -#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO5_INT -#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#elif defined(CONFIG_MIPS_DB1100) -#define DB1XXX_PCMCIA_CD0 AU1100_GPIO0_INT -#define DB1XXX_PCMCIA_STSCHG0 AU1100_GPIO1_INT -#define DB1XXX_PCMCIA_CARD0 AU1100_GPIO2_INT -#define DB1XXX_PCMCIA_CD1 AU1100_GPIO3_INT -#define DB1XXX_PCMCIA_STSCHG1 AU1100_GPIO4_INT -#define DB1XXX_PCMCIA_CARD1 AU1100_GPIO5_INT -#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#elif defined(CONFIG_MIPS_DB1500) -#define DB1XXX_PCMCIA_CD0 AU1500_GPIO0_INT -#define DB1XXX_PCMCIA_STSCHG0 AU1500_GPIO1_INT -#define DB1XXX_PCMCIA_CARD0 AU1500_GPIO2_INT -#define DB1XXX_PCMCIA_CD1 AU1500_GPIO3_INT -#define DB1XXX_PCMCIA_STSCHG1 AU1500_GPIO4_INT -#define DB1XXX_PCMCIA_CARD1 AU1500_GPIO5_INT -#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#elif defined(CONFIG_MIPS_DB1550) -#define DB1XXX_PCMCIA_CD0 AU1550_GPIO0_INT -#define DB1XXX_PCMCIA_STSCHG0 AU1550_GPIO21_INT -#define DB1XXX_PCMCIA_CARD0 AU1550_GPIO3_INT -#define DB1XXX_PCMCIA_CD1 AU1550_GPIO1_INT -#define DB1XXX_PCMCIA_STSCHG1 AU1550_GPIO22_INT -#define DB1XXX_PCMCIA_CARD1 AU1550_GPIO5_INT -#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#else -/* other board: no PCMCIA */ -#undef DB1XXX_HAS_PCMCIA -#undef F_SWAPPED -#define F_SWAPPED 0 -#if defined(CONFIG_MIPS_BOSPORUS) -#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */ -#define BOARD_FLASH_WIDTH 2 /* 16-bits */ -#elif defined(CONFIG_MIPS_MIRAGE) -#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#endif -#endif - -#ifdef CONFIG_PCI -#ifdef CONFIG_MIPS_DB1500 -static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) -{ - if ((slot < 12) || (slot > 13) || pin == 0) - return -1; - if (slot == 12) - return (pin == 1) ? AU1500_PCI_INTA : 0xff; - if (slot == 13) { - switch (pin) { - case 1: return AU1500_PCI_INTA; - case 2: return AU1500_PCI_INTB; - case 3: return AU1500_PCI_INTC; - case 4: return AU1500_PCI_INTD; - } - } - return -1; -} -#endif - -#ifdef CONFIG_MIPS_DB1550 -static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) -{ - if ((slot < 11) || (slot > 13) || pin == 0) - return -1; - if (slot == 11) - return (pin == 1) ? AU1550_PCI_INTC : 0xff; - if (slot == 12) { - switch (pin) { - case 1: return AU1550_PCI_INTB; - case 2: return AU1550_PCI_INTC; - case 3: return AU1550_PCI_INTD; - case 4: return AU1550_PCI_INTA; - } - } - if (slot == 13) { - switch (pin) { - case 1: return AU1550_PCI_INTA; - case 2: return AU1550_PCI_INTB; - case 3: return AU1550_PCI_INTC; - case 4: return AU1550_PCI_INTD; - } - } - return -1; -} -#endif - -#ifdef CONFIG_MIPS_BOSPORUS -static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) -{ - if ((slot < 11) || (slot > 13) || pin == 0) - return -1; - if (slot == 12) - return (pin == 1) ? AU1500_PCI_INTA : 0xff; - if (slot == 11) { - switch (pin) { - case 1: return AU1500_PCI_INTA; - case 2: return AU1500_PCI_INTB; - default: return 0xff; - } - } - if (slot == 13) { - switch (pin) { - case 1: return AU1500_PCI_INTA; - case 2: return AU1500_PCI_INTB; - case 3: return AU1500_PCI_INTC; - case 4: return AU1500_PCI_INTD; - } - } - return -1; -} -#endif - -#ifdef CONFIG_MIPS_MIRAGE -static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) -{ - if ((slot < 11) || (slot > 13) || pin == 0) - return -1; - if (slot == 11) - return (pin == 1) ? AU1500_PCI_INTD : 0xff; - if (slot == 12) - return (pin == 3) ? AU1500_PCI_INTC : 0xff; - if (slot == 13) { - switch (pin) { - case 1: return AU1500_PCI_INTA; - case 2: return AU1500_PCI_INTB; - default: return 0xff; - } - } - return -1; -} -#endif - -static struct resource alchemy_pci_host_res[] = { - [0] = { - .start = AU1500_PCI_PHYS_ADDR, - .end = AU1500_PCI_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct alchemy_pci_platdata db1xxx_pci_pd = { - .board_map_irq = db1xxx_map_pci_irq, -}; - -static struct platform_device db1xxx_pci_host_dev = { - .dev.platform_data = &db1xxx_pci_pd, - .name = "alchemy-pci", - .id = 0, - .num_resources = ARRAY_SIZE(alchemy_pci_host_res), - .resource = alchemy_pci_host_res, -}; - -static int __init db15x0_pci_init(void) -{ - return platform_device_register(&db1xxx_pci_host_dev); -} -/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ -arch_initcall(db15x0_pci_init); -#endif - -#ifdef CONFIG_MIPS_DB1100 -static struct resource au1100_lcd_resources[] = { - [0] = { - .start = AU1100_LCD_PHYS_ADDR, - .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1100_LCD_INT, - .end = AU1100_LCD_INT, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); - -static struct platform_device au1100_lcd_device = { - .name = "au1100-lcd", - .id = 0, - .dev = { - .dma_mask = &au1100_lcd_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(au1100_lcd_resources), - .resource = au1100_lcd_resources, -}; -#endif - -static struct resource alchemy_ac97c_res[] = { - [0] = { - .start = AU1000_AC97_PHYS_ADDR, - .end = AU1000_AC97_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMA_ID_AC97C_TX, - .end = DMA_ID_AC97C_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMA_ID_AC97C_RX, - .end = DMA_ID_AC97C_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device alchemy_ac97c_dev = { - .name = "alchemy-ac97c", - .id = -1, - .resource = alchemy_ac97c_res, - .num_resources = ARRAY_SIZE(alchemy_ac97c_res), -}; - -static struct platform_device alchemy_ac97c_dma_dev = { - .name = "alchemy-pcm-dma", - .id = 0, -}; - -static struct platform_device db1x00_codec_dev = { - .name = "ac97-codec", - .id = -1, -}; - -static struct platform_device db1x00_audio_dev = { - .name = "db1000-audio", -}; - -static int __init db1xxx_dev_init(void) -{ -#ifdef DB1XXX_HAS_PCMCIA - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - DB1XXX_PCMCIA_CARD0, DB1XXX_PCMCIA_CD0, - /*DB1XXX_PCMCIA_STSCHG0*/0, 0, 0); - - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, - DB1XXX_PCMCIA_CARD1, DB1XXX_PCMCIA_CD1, - /*DB1XXX_PCMCIA_STSCHG1*/0, 0, 1); -#endif -#ifdef CONFIG_MIPS_DB1100 - platform_device_register(&au1100_lcd_device); -#endif - db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED); - - platform_device_register(&db1x00_codec_dev); - platform_device_register(&alchemy_ac97c_dma_dev); - platform_device_register(&alchemy_ac97c_dev); - platform_device_register(&db1x00_audio_dev); - - return 0; -} -device_initcall(db1xxx_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1000/Makefile b/arch/mips/alchemy/devboards/pb1000/Makefile deleted file mode 100644 index 97c6615ba2bb..000000000000 --- a/arch/mips/alchemy/devboards/pb1000/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# -# Makefile for the Alchemy Semiconductor Pb1000 board. -# - -obj-y := board_setup.o diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c deleted file mode 100644 index e64fdcbf75d0..000000000000 --- a/arch/mips/alchemy/devboards/pb1000/board_setup.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "../platform.h" - -const char *get_system_type(void) -{ - return "Alchemy Pb1000"; -} - -static void board_reset(char *c) -{ - asm volatile ("jr %0" : : "r" (0xbfc00000)); -} - -static void board_power_off(void) -{ - while (1) - asm volatile ( - " .set mips32 \n" - " wait \n" - " .set mips0 \n"); -} - -void __init board_setup(void) -{ - u32 pin_func, static_cfg0; - u32 sys_freqctrl, sys_clksrc; - u32 prid = read_c0_prid(); - - sys_freqctrl = 0; - sys_clksrc = 0; - - /* Set AUX clock to 12 MHz * 8 = 96 MHz */ - au_writel(8, SYS_AUXPLL); - alchemy_gpio1_input_enable(); - udelay(100); - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - /* Zero and disable FREQ2 */ - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* Zero and disable USBH/USBD clocks */ - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | - SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); - au_writel(sys_clksrc, SYS_CLKSRC); - - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | - SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); - - switch (prid & 0x000000FF) { - case 0x00: /* DA */ - case 0x01: /* HA */ - case 0x02: /* HB */ - /* CPU core freq to 48 MHz to slow it way down... */ - au_writel(4, SYS_CPUPLL); - - /* - * Setup 48 MHz FREQ2 from CPUPLL for USB Host - * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz - */ - sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* CPU core freq to 384 MHz */ - au_writel(0x20, SYS_CPUPLL); - - printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n"); - break; - - default: /* HC and newer */ - /* FREQ2 = aux / 2 = 48 MHz */ - sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | - SYS_FC_FE2 | SYS_FC_FS2; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - break; - } - - /* - * Route 48 MHz FREQ2 into USB Host and/or Device - */ - sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT; - au_writel(sys_clksrc, SYS_CLKSRC); - - /* Configure pins GPIO[14:9] as GPIO */ - pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB); - - /* 2nd USB port is USB host */ - pin_func |= SYS_PF_USB; - - au_writel(pin_func, SYS_PINFUNC); - - alchemy_gpio_direction_input(11); - alchemy_gpio_direction_input(13); - alchemy_gpio_direction_output(4, 0); - alchemy_gpio_direction_output(5, 0); -#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ - - /* Make GPIO 15 an input (for interrupt line) */ - pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF; - /* We don't need I2S, so make it available for GPIO[31:29] */ - pin_func |= SYS_PF_I2S; - au_writel(pin_func, SYS_PINFUNC); - - alchemy_gpio_direction_input(15); - - static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00; - au_writel(static_cfg0, MEM_STCFG0); - - /* configure RCE2* for LCD */ - au_writel(0x00000004, MEM_STCFG2); - - /* MEM_STTIME2 */ - au_writel(0x09000000, MEM_STTIME2); - - /* Set 32-bit base address decoding for RCE2* */ - au_writel(0x10003ff0, MEM_STADDR2); - - /* - * PCI CPLD setup - * Expand CE0 to cover PCI - */ - au_writel(0x11803e40, MEM_STADDR1); - - /* Burst visibility on */ - au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0); - - au_writel(0x83, MEM_STCFG1); /* ewait enabled, flash timing */ - au_writel(0x33030a10, MEM_STTIME1); /* slower timing for FPGA */ - - /* Setup the static bus controller */ - au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */ - au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ - au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ - - /* - * Enable Au1000 BCLK switching - note: sed1356 must not use - * its BCLK (Au1000 LCLK) for any timings - */ - switch (prid & 0x000000FF) { - case 0x00: /* DA */ - case 0x01: /* HA */ - case 0x02: /* HB */ - break; - default: /* HC and newer */ - /* - * Enable sys bus clock divider when IDLE state or no bus - * activity. - */ - au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); - break; - } - - pm_power_off = board_power_off; - _machine_halt = board_power_off; - _machine_restart = board_reset; -} - -static int __init pb1000_init_irq(void) -{ - irq_set_irq_type(AU1000_GPIO15_INT, IRQF_TRIGGER_LOW); - return 0; -} -arch_initcall(pb1000_init_irq); - -static int __init pb1000_device_init(void) -{ - return db1x_register_norflash(8 * 1024 * 1024, 4, 0); -} -device_initcall(pb1000_device_init); diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100.c similarity index 55% rename from arch/mips/alchemy/devboards/pb1100/board_setup.c rename to arch/mips/alchemy/devboards/pb1100.c index d108fd573aaf..cff50d05ddd4 100644 --- a/arch/mips/alchemy/devboards/pb1100/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1100.c @@ -1,42 +1,37 @@ /* - * Copyright 2002, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. + * Pb1100 board platform device registration * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * Copyright (C) 2009 Manuel Lauss * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include #include #include -#include #include - +#include +#include #include #include - #include - +#include "platform.h" const char *get_system_type(void) { - return "Alchemy Pb1100"; + return "PB1100"; } void __init board_setup(void) @@ -115,13 +110,58 @@ void __init board_setup(void) } } -static int __init pb1100_init_irq(void) +/******************************************************************************/ + +static struct resource au1100_lcd_resources[] = { + [0] = { + .start = AU1100_LCD_PHYS_ADDR, + .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_LCD_INT, + .end = AU1100_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device au1100_lcd_device = { + .name = "au1100-lcd", + .id = 0, + .dev = { + .dma_mask = &au1100_lcd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(au1100_lcd_resources), + .resource = au1100_lcd_resources, +}; + +static int __init pb1100_dev_init(void) { + int swapped; + irq_set_irq_type(AU1100_GPIO9_INT, IRQF_TRIGGER_LOW); /* PCCD# */ irq_set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */ irq_set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */ irq_set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */ + /* PCMCIA. single socket, identical to Pb1500 */ + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1100_GPIO11_INT, AU1100_GPIO9_INT, /* card / insert */ + /*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */ + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; + db1x_register_norflash(64 * 1024 * 1024, 4, swapped); + platform_device_register(&au1100_lcd_device); + return 0; } -arch_initcall(pb1100_init_irq); +device_initcall(pb1100_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1100/Makefile b/arch/mips/alchemy/devboards/pb1100/Makefile deleted file mode 100644 index 7e3756c83fe5..000000000000 --- a/arch/mips/alchemy/devboards/pb1100/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2001, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# -# Makefile for the Alchemy Semiconductor Pb1100 board. -# - -obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1100/platform.c b/arch/mips/alchemy/devboards/pb1100/platform.c deleted file mode 100644 index 9c57c01a68c4..000000000000 --- a/arch/mips/alchemy/devboards/pb1100/platform.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Pb1100 board platform device registration - * - * Copyright (C) 2009 Manuel Lauss - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include - -#include -#include - -#include "../platform.h" - -static struct resource au1100_lcd_resources[] = { - [0] = { - .start = AU1100_LCD_PHYS_ADDR, - .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1100_LCD_INT, - .end = AU1100_LCD_INT, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); - -static struct platform_device au1100_lcd_device = { - .name = "au1100-lcd", - .id = 0, - .dev = { - .dma_mask = &au1100_lcd_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(au1100_lcd_resources), - .resource = au1100_lcd_resources, -}; - -static int __init pb1100_dev_init(void) -{ - int swapped; - - /* PCMCIA. single socket, identical to Pb1500 */ - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - AU1100_GPIO11_INT, AU1100_GPIO9_INT, /* card / insert */ - /*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */ - - swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; - db1x_register_norflash(64 * 1024 * 1024, 4, swapped); - platform_device_register(&au1100_lcd_device); - - return 0; -} -device_initcall(pb1100_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1200/Makefile b/arch/mips/alchemy/devboards/pb1200/Makefile deleted file mode 100644 index 18c1bd53e4c0..000000000000 --- a/arch/mips/alchemy/devboards/pb1200/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards. -# - -obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c deleted file mode 100644 index 6d06b07c2381..000000000000 --- a/arch/mips/alchemy/devboards/pb1200/board_setup.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Pb1200/Db1200 board setup. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include - -#include -#include - -#ifdef CONFIG_MIPS_PB1200 -#include -#endif - -#ifdef CONFIG_MIPS_DB1200 -#include -#define PB1200_INT_BEGIN DB1200_INT_BEGIN -#define PB1200_INT_END DB1200_INT_END -#endif - -#include - -const char *get_system_type(void) -{ - return "Alchemy Pb1200"; -} - -void __init board_setup(void) -{ - printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); - bcsr_init(PB1200_BCSR_PHYS_ADDR, - PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); - -#if 0 - { - u32 pin_func; - - /* - * Enable PSC1 SYNC for AC97. Normaly done in audio driver, - * but it is board specific code, so put it here. - */ - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; - au_writel(pin_func, SYS_PINFUNC); - - au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ - au_sync(); - } -#endif - -#if defined(CONFIG_I2C_AU1550) - { - u32 freq0, clksrc; - u32 pin_func; - - /* Select SMBus in CPLD */ - bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); - - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); - /* Set GPIOs correctly */ - pin_func |= 2 << 17; - au_writel(pin_func, SYS_PINFUNC); - au_sync(); - - /* The I2C driver depends on 50 MHz clock */ - freq0 = au_readl(SYS_FREQCTRL0); - au_sync(); - freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); - freq0 |= 3 << SYS_FC_FRDIV1_BIT; - /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */ - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - freq0 |= SYS_FC_FE1; - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - - clksrc = au_readl(SYS_CLKSRC); - au_sync(); - clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK); - /* Bit 22 is EXTCLK0 for PSC0 */ - clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT; - au_writel(clksrc, SYS_CLKSRC); - au_sync(); - } -#endif - - /* - * The Pb1200 development board uses external MUX for PSC0 to - * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI - */ -#ifdef CONFIG_I2C_AU1550 - bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); -#endif - au_sync(); -} - -static int __init pb1200_init_irq(void) -{ - /* We have a problem with CPLD rev 3. */ - if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); - printk(KERN_ERR "updated to latest revision. This software will\n"); - printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - panic("Game over. Your score is 0."); - } - - irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); - bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT); - - return 0; -} -arch_initcall(pb1200_init_irq); - - -int board_au1200fb_panel(void) -{ - return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; -} - -int board_au1200fb_panel_init(void) -{ - /* Apply power */ - bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL); - /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */ - return 0; -} - -int board_au1200fb_panel_shutdown(void) -{ - /* Remove power */ - bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL, 0); - /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */ - return 0; -} diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c deleted file mode 100644 index 54f7f7b0676e..000000000000 --- a/arch/mips/alchemy/devboards/pb1200/platform.c +++ /dev/null @@ -1,339 +0,0 @@ -/* - * Pb1200/DBAu1200 board platform device registration - * - * Copyright (C) 2008 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include "../platform.h" - -static int mmc_activity; - -static void pb1200mmc0_set_power(void *mmc_host, int state) -{ - if (state) - bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR); - else - bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0); - - msleep(1); -} - -static int pb1200mmc0_card_readonly(void *mmc_host) -{ - return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0; -} - -static int pb1200mmc0_card_inserted(void *mmc_host) -{ - return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0; -} - -static void pb1200_mmcled_set(struct led_classdev *led, - enum led_brightness brightness) -{ - if (brightness != LED_OFF) { - if (++mmc_activity == 1) - bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); - } else { - if (--mmc_activity == 0) - bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); - } -} - -static struct led_classdev pb1200mmc_led = { - .brightness_set = pb1200_mmcled_set, -}; - -static void pb1200mmc1_set_power(void *mmc_host, int state) -{ - if (state) - bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR); - else - bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0); - - msleep(1); -} - -static int pb1200mmc1_card_readonly(void *mmc_host) -{ - return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0; -} - -static int pb1200mmc1_card_inserted(void *mmc_host) -{ - return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0; -} - -static struct au1xmmc_platform_data pb1200mmc_platdata[2] = { - [0] = { - .set_power = pb1200mmc0_set_power, - .card_inserted = pb1200mmc0_card_inserted, - .card_readonly = pb1200mmc0_card_readonly, - .cd_setup = NULL, /* use poll-timer in driver */ - .led = &pb1200mmc_led, - }, - [1] = { - .set_power = pb1200mmc1_set_power, - .card_inserted = pb1200mmc1_card_inserted, - .card_readonly = pb1200mmc1_card_readonly, - .cd_setup = NULL, /* use poll-timer in driver */ - .led = &pb1200mmc_led, - }, -}; - -static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); - -static struct resource au1200_mmc0_res[] = { - [0] = { - .start = AU1100_SD0_PHYS_ADDR, - .end = AU1100_SD0_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_SD_INT, - .end = AU1200_SD_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AU1200_DSCR_CMD0_SDMS_TX0, - .end = AU1200_DSCR_CMD0_SDMS_TX0, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = AU1200_DSCR_CMD0_SDMS_RX0, - .end = AU1200_DSCR_CMD0_SDMS_RX0, - .flags = IORESOURCE_DMA, - } -}; - -static struct platform_device pb1200_mmc0_dev = { - .name = "au1xxx-mmc", - .id = 0, - .dev = { - .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &pb1200mmc_platdata[0], - }, - .num_resources = ARRAY_SIZE(au1200_mmc0_res), - .resource = au1200_mmc0_res, -}; - -static struct resource au1200_mmc1_res[] = { - [0] = { - .start = AU1100_SD1_PHYS_ADDR, - .end = AU1100_SD1_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_SD_INT, - .end = AU1200_SD_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AU1200_DSCR_CMD0_SDMS_TX1, - .end = AU1200_DSCR_CMD0_SDMS_TX1, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = AU1200_DSCR_CMD0_SDMS_RX1, - .end = AU1200_DSCR_CMD0_SDMS_RX1, - .flags = IORESOURCE_DMA, - } -}; - -static struct platform_device pb1200_mmc1_dev = { - .name = "au1xxx-mmc", - .id = 1, - .dev = { - .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &pb1200mmc_platdata[1], - }, - .num_resources = ARRAY_SIZE(au1200_mmc1_res), - .resource = au1200_mmc1_res, -}; - - -static struct resource ide_resources[] = { - [0] = { - .start = IDE_PHYS_ADDR, - .end = IDE_PHYS_ADDR + IDE_PHYS_LEN - 1, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = IDE_INT, - .end = IDE_INT, - .flags = IORESOURCE_IRQ - }, - [2] = { - .start = AU1200_DSCR_CMD0_DMA_REQ1, - .end = AU1200_DSCR_CMD0_DMA_REQ1, - .flags = IORESOURCE_DMA, - }, -}; - -static u64 ide_dmamask = DMA_BIT_MASK(32); - -static struct platform_device ide_device = { - .name = "au1200-ide", - .id = 0, - .dev = { - .dma_mask = &ide_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(ide_resources), - .resource = ide_resources -}; - -static struct smc91x_platdata smc_data = { - .flags = SMC91X_NOWAIT | SMC91X_USE_16BIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91c111_resources[] = { - [0] = { - .name = "smc91x-regs", - .start = SMC91C111_PHYS_ADDR, - .end = SMC91C111_PHYS_ADDR + 0xf, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = SMC91C111_INT, - .end = SMC91C111_INT, - .flags = IORESOURCE_IRQ - }, -}; - -static struct platform_device smc91c111_device = { - .dev = { - .platform_data = &smc_data, - }, - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(smc91c111_resources), - .resource = smc91c111_resources -}; - -static struct resource au1200_psc0_res[] = { - [0] = { - .start = AU1550_PSC0_PHYS_ADDR, - .end = AU1550_PSC0_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_PSC0_INT, - .end = AU1200_PSC0_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AU1200_DSCR_CMD0_PSC0_TX, - .end = AU1200_DSCR_CMD0_PSC0_TX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = AU1200_DSCR_CMD0_PSC0_RX, - .end = AU1200_DSCR_CMD0_PSC0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device pb1200_i2c_dev = { - .name = "au1xpsc_smbus", - .id = 0, /* bus number */ - .num_resources = ARRAY_SIZE(au1200_psc0_res), - .resource = au1200_psc0_res, -}; - -static struct resource au1200_lcd_res[] = { - [0] = { - .start = AU1200_LCD_PHYS_ADDR, - .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_LCD_INT, - .end = AU1200_LCD_INT, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32); - -static struct platform_device au1200_lcd_dev = { - .name = "au1200-lcd", - .id = 0, - .dev = { - .dma_mask = &au1200_lcd_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(au1200_lcd_res), - .resource = au1200_lcd_res, -}; - -static struct platform_device *board_platform_devices[] __initdata = { - &ide_device, - &smc91c111_device, - &pb1200_i2c_dev, - &pb1200_mmc0_dev, - &pb1200_mmc1_dev, - &au1200_lcd_dev, -}; - -static int __init board_register_devices(void) -{ - int swapped; - - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - PB1200_PC0_INT, PB1200_PC0_INSERT_INT, - /*PB1200_PC0_STSCHG_INT*/0, PB1200_PC0_EJECT_INT, 0); - - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008000000, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x008000000, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1, - PB1200_PC1_INT, PB1200_PC1_INSERT_INT, - /*PB1200_PC1_STSCHG_INT*/0, PB1200_PC1_EJECT_INT, 1); - - swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; - db1x_register_norflash(128 * 1024 * 1024, 2, swapped); - - return platform_add_devices(board_platform_devices, - ARRAY_SIZE(board_platform_devices)); -} -device_initcall(board_register_devices); diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500.c similarity index 51% rename from arch/mips/alchemy/devboards/pb1500/board_setup.c rename to arch/mips/alchemy/devboards/pb1500.c index 37c1883b5ea9..e7b807b3ec51 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500.c @@ -1,41 +1,37 @@ /* - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. + * Pb1500 board support. * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * Copyright (C) 2009 Manuel Lauss * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include +#include #include #include #include - +#include #include #include - #include +#include "platform.h" const char *get_system_type(void) { - return "Alchemy Pb1500"; + return "PB1500"; } void __init board_setup(void) @@ -123,17 +119,80 @@ void __init board_setup(void) } } -static int __init pb1500_init_irq(void) +/******************************************************************************/ + +static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) { - irq_set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW); /* CARD0 */ - irq_set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata pb1500_pci_pd = { + .board_map_irq = pb1500_map_pci_irq, + .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | + PCI_CONFIG_CH | +#if defined(__MIPSEB__) + PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, +#else + 0, +#endif +}; + +static struct platform_device pb1500_pci_host = { + .dev.platform_data = &pb1500_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + +static int __init pb1500_dev_init(void) +{ + int swapped; + + irq_set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW); /* CD0# */ + irq_set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW); /* CARD0 */ + irq_set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); + /* PCMCIA. single socket, identical to Pb1100 */ + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1500_GPIO11_INT, AU1500_GPIO9_INT, /* card / insert */ + /*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */ + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; + db1x_register_norflash(64 * 1024 * 1024, 4, swapped); + platform_device_register(&pb1500_pci_host); + return 0; } -arch_initcall(pb1500_init_irq); +arch_initcall(pb1500_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1500/Makefile b/arch/mips/alchemy/devboards/pb1500/Makefile deleted file mode 100644 index e83b151b5b63..000000000000 --- a/arch/mips/alchemy/devboards/pb1500/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2001, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# -# Makefile for the Alchemy Semiconductor Pb1500 board. -# - -obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c deleted file mode 100644 index 1e52a01bac00..000000000000 --- a/arch/mips/alchemy/devboards/pb1500/platform.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Pb1500 board platform device registration - * - * Copyright (C) 2009 Manuel Lauss - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include - -#include "../platform.h" - -static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) -{ - if ((slot < 12) || (slot > 13) || pin == 0) - return -1; - if (slot == 12) - return (pin == 1) ? AU1500_PCI_INTA : 0xff; - if (slot == 13) { - switch (pin) { - case 1: return AU1500_PCI_INTA; - case 2: return AU1500_PCI_INTB; - case 3: return AU1500_PCI_INTC; - case 4: return AU1500_PCI_INTD; - } - } - return -1; -} - -static struct resource alchemy_pci_host_res[] = { - [0] = { - .start = AU1500_PCI_PHYS_ADDR, - .end = AU1500_PCI_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct alchemy_pci_platdata pb1500_pci_pd = { - .board_map_irq = pb1500_map_pci_irq, - .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | - PCI_CONFIG_CH | -#if defined(__MIPSEB__) - PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, -#else - 0, -#endif -}; - -static struct platform_device pb1500_pci_host = { - .dev.platform_data = &pb1500_pci_pd, - .name = "alchemy-pci", - .id = 0, - .num_resources = ARRAY_SIZE(alchemy_pci_host_res), - .resource = alchemy_pci_host_res, -}; - -static int __init pb1500_dev_init(void) -{ - int swapped; - - /* PCMCIA. single socket, identical to Pb1100 */ - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - AU1500_GPIO11_INT, AU1500_GPIO9_INT, /* card / insert */ - /*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */ - - swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; - db1x_register_norflash(64 * 1024 * 1024, 4, swapped); - platform_device_register(&pb1500_pci_host); - - return 0; -} -arch_initcall(pb1500_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1550/platform.c b/arch/mips/alchemy/devboards/pb1550.c similarity index 61% rename from arch/mips/alchemy/devboards/pb1550/platform.c rename to arch/mips/alchemy/devboards/pb1550.c index a4604b8a349e..b37e7de8d920 100644 --- a/arch/mips/alchemy/devboards/pb1550/platform.c +++ b/arch/mips/alchemy/devboards/pb1550.c @@ -1,7 +1,7 @@ /* - * Pb1550 board platform device registration + * Pb1550 board support. * - * Copyright (C) 2009 Manuel Lauss + * Copyright (C) 2009-2011 Manuel Lauss * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,13 +20,44 @@ #include #include +#include #include #include #include -#include +#include +#include #include +#include "platform.h" -#include "../platform.h" +const char *get_system_type(void) +{ + return "PB1550"; +} + +void __init board_setup(void) +{ + u32 pin_func; + + bcsr_init(PB1550_BCSR_PHYS_ADDR, + PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS); + + alchemy_gpio2_enable(); + + /* + * Enable PSC1 SYNC for AC'97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ + + printk(KERN_INFO "AMD Alchemy Pb1550 Board\n"); +} + +/******************************************************************************/ static int pb1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) { @@ -101,10 +132,79 @@ static struct platform_device pb1550_i2c_dev = { .resource = au1550_psc2_res, }; +static struct mtd_partition pb1550_nand_parts[] = { + [0] = { + .name = "NAND FS 0", + .offset = 0, + .size = 8 * 1024 * 1024, + }, + [1] = { + .name = "NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct au1550nd_platdata pb1550_nand_pd = { + .parts = pb1550_nand_parts, + .num_parts = ARRAY_SIZE(pb1550_nand_parts), + .devwidth = 0, /* x8 NAND default, needs fixing up */ +}; + +static struct resource pb1550_nand_res[] = { + [0] = { + .start = 0x20000000, + .end = 0x20000fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device pb1550_nand_dev = { + .name = "au1550-nand", + .id = -1, + .resource = pb1550_nand_res, + .num_resources = ARRAY_SIZE(pb1550_nand_res), + .dev = { + .platform_data = &pb1550_nand_pd, + }, +}; + +static void __init pb1550_nand_setup(void) +{ + int boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | + ((bcsr_read(BCSR_STATUS) >> 6) & 0x1); + + switch (boot_swapboot) { + case 0: + case 2: + case 8: + case 0xC: + case 0xD: + /* x16 NAND Flash */ + pb1550_nand_pd.devwidth = 1; + /* fallthrough */ + case 1: + case 9: + case 3: + case 0xE: + case 0xF: + /* x8 NAND, already set up */ + platform_device_register(&pb1550_nand_dev); + } +} + static int __init pb1550_dev_init(void) { int swapped; + irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); + irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); + irq_set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH); + + /* enable both PCMCIA card irqs in the shared line */ + alchemy_gpio2_enable_int(201); + alchemy_gpio2_enable_int(202); + /* Pb1550, like all others, also has statuschange irqs; however they're * wired up on one of the Au1550's shared GPIO201_205 line, which also * services the PCMCIA card interrupts. So we ignore statuschange and @@ -130,6 +230,10 @@ static int __init pb1550_dev_init(void) AU1000_PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1, AU1550_GPIO201_205_INT, AU1550_GPIO1_INT, 0, 0, 1); + /* NAND setup */ + gpio_direction_input(206); /* GPIO206 high */ + pb1550_nand_setup(); + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT; db1x_register_norflash(128 * 1024 * 1024, 4, swapped); platform_device_register(&pb1550_pci_host); diff --git a/arch/mips/alchemy/devboards/pb1550/Makefile b/arch/mips/alchemy/devboards/pb1550/Makefile deleted file mode 100644 index 9661b6ec5dd3..000000000000 --- a/arch/mips/alchemy/devboards/pb1550/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# -# Makefile for the Alchemy Semiconductor Pb1550 board. -# - -obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c deleted file mode 100644 index 0f62d1e3df24..000000000000 --- a/arch/mips/alchemy/devboards/pb1550/board_setup.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Pb1550 board setup. - * - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include -#include -#include -#include - -#include - -const char *get_system_type(void) -{ - return "Alchemy Pb1550"; -} - -void __init board_setup(void) -{ - u32 pin_func; - - bcsr_init(PB1550_BCSR_PHYS_ADDR, - PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS); - - alchemy_gpio2_enable(); - - /* - * Enable PSC1 SYNC for AC'97. Normaly done in audio driver, - * but it is board specific code, so put it here. - */ - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; - au_writel(pin_func, SYS_PINFUNC); - - bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ - - printk(KERN_INFO "AMD Alchemy Pb1550 Board\n"); -} - -static int __init pb1550_init_irq(void) -{ - irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH); - - /* enable both PCMCIA card irqs in the shared line */ - alchemy_gpio2_enable_int(201); - alchemy_gpio2_enable_int(202); - - return 0; -} -arch_initcall(pb1550_init_irq); diff --git a/arch/mips/alchemy/devboards/platform.c b/arch/mips/alchemy/devboards/platform.c index 49a4b3244d8e..621f70afb63a 100644 --- a/arch/mips/alchemy/devboards/platform.c +++ b/arch/mips/alchemy/devboards/platform.c @@ -13,6 +13,13 @@ #include #include + +static struct platform_device db1x00_rtc_dev = { + .name = "rtc-au1xxx", + .id = -1, +}; + + static void db1x_power_off(void) { bcsr_write(BCSR_RESETS, 0); @@ -25,7 +32,7 @@ static void db1x_reset(char *c) bcsr_write(BCSR_SYSTEM, 0); } -static int __init db1x_poweroff_setup(void) +static int __init db1x_late_setup(void) { if (!pm_power_off) pm_power_off = db1x_power_off; @@ -34,9 +41,11 @@ static int __init db1x_poweroff_setup(void) if (!_machine_restart) _machine_restart = db1x_reset; + platform_device_register(&db1x00_rtc_dev); + return 0; } -late_initcall(db1x_poweroff_setup); +device_initcall(db1x_late_setup); /* register a pcmcia socket */ int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start, diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c index e5306b56da6d..93a22107cc41 100644 --- a/arch/mips/alchemy/devboards/prom.c +++ b/arch/mips/alchemy/devboards/prom.c @@ -33,10 +33,9 @@ #include #include -#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_DB1000) || \ - defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) || \ - defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_DB1500) || \ - defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE) +#if defined(CONFIG_MIPS_DB1000) || \ + defined(CONFIG_MIPS_PB1100) || \ + defined(CONFIG_MIPS_PB1500) #define ALCHEMY_BOARD_DEFAULT_MEMSIZE 0x04000000 #else /* Au1550/Au1200-based develboards */ @@ -62,5 +61,9 @@ void __init prom_init(void) void prom_putchar(unsigned char c) { +#ifdef CONFIG_MIPS_DB1300 + alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c); +#else alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); +#endif } diff --git a/arch/mips/alchemy/gpr/Makefile b/arch/mips/alchemy/gpr/Makefile deleted file mode 100644 index cb73fe256dce..000000000000 --- a/arch/mips/alchemy/gpr/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2003 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# -# Makefile for Trapeze ITS GPR board. -# - -obj-y += board_setup.o init.o platform.o diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c deleted file mode 100644 index dea45c78fdcd..000000000000 --- a/arch/mips/alchemy/gpr/board_setup.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright 2010 Wolfgang Grandegger - * - * Copyright 2000-2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include - -#include -#include - -#include - -static void gpr_reset(char *c) -{ - /* switch System-LED to orange (red# and green# on) */ - alchemy_gpio_direction_output(4, 0); - alchemy_gpio_direction_output(5, 0); - - /* trigger watchdog to reset board in 200ms */ - printk(KERN_EMERG "Triggering watchdog soft reset...\n"); - raw_local_irq_disable(); - alchemy_gpio_direction_output(1, 0); - udelay(1); - alchemy_gpio_set_value(1, 1); - while (1) - cpu_wait(); -} - -static void gpr_power_off(void) -{ - while (1) - cpu_wait(); -} - -void __init board_setup(void) -{ - printk(KERN_INFO "Trapeze ITS GPR board\n"); - - pm_power_off = gpr_power_off; - _machine_halt = gpr_power_off; - _machine_restart = gpr_reset; - - /* Enable UART1/3 */ - alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); - alchemy_uart_enable(AU1000_UART1_PHYS_ADDR); - - /* Take away Reset of UMTS-card */ - alchemy_gpio_direction_output(215, 1); -} diff --git a/arch/mips/alchemy/gpr/init.c b/arch/mips/alchemy/gpr/init.c deleted file mode 100644 index 229aafae680c..000000000000 --- a/arch/mips/alchemy/gpr/init.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright 2010 Wolfgang Grandegger - * - * Copyright 2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include -#include - -#include - -const char *get_system_type(void) -{ - return "GPR"; -} - -void __init prom_init(void) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - - memsize_str = prom_getenv("memsize"); - if (!memsize_str) - memsize = 0x04000000; - else - strict_strtoul(memsize_str, 0, &memsize); - add_memory_region(0, memsize, BOOT_MEM_RAM); -} - -void prom_putchar(unsigned char c) -{ - alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); -} diff --git a/arch/mips/alchemy/mtx-1/Makefile b/arch/mips/alchemy/mtx-1/Makefile deleted file mode 100644 index 81b540ceaf88..000000000000 --- a/arch/mips/alchemy/mtx-1/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright 2003 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# Bruno Randolf -# -# Makefile for 4G Systems MTX-1 board. -# - -obj-y += init.o board_setup.o platform.o diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c deleted file mode 100644 index 851a5ab4c8f2..000000000000 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * 4G Systems MTX-1 board setup. - * - * Copyright 2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * Bruno Randolf - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include - -#include -#include - -#include - -static void mtx1_reset(char *c) -{ - /* Jump to the reset vector */ - __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); -} - -static void mtx1_power_off(void) -{ - while (1) - asm volatile ( - " .set mips32 \n" - " wait \n" - " .set mips0 \n"); -} - -void __init board_setup(void) -{ -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - /* Enable USB power switch */ - alchemy_gpio_direction_output(204, 0); -#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ - - /* Initialize sys_pinfunc */ - au_writel(SYS_PF_NI2, SYS_PINFUNC); - - /* Initialize GPIO */ - au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR); - alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */ - alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */ - alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */ - alchemy_gpio_direction_output(5, 0); /* Disable eth PHY TX_ER */ - - /* Enable LED and set it to green */ - alchemy_gpio_direction_output(211, 1); /* green on */ - alchemy_gpio_direction_output(212, 0); /* red off */ - - pm_power_off = mtx1_power_off; - _machine_halt = mtx1_power_off; - _machine_restart = mtx1_reset; - - printk(KERN_INFO "4G Systems MTX-1 Board\n"); -} - -static int __init mtx1_init_irq(void) -{ - irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); - irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); - - return 0; -} -arch_initcall(mtx1_init_irq); diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c deleted file mode 100644 index 2e81cc7f3422..000000000000 --- a/arch/mips/alchemy/mtx-1/init.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * 4G Systems MTX-1 board setup - * - * Copyright 2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * Bruno Randolf - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include -#include - -#include - -const char *get_system_type(void) -{ - return "MTX-1"; -} - -void __init prom_init(void) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - - memsize_str = prom_getenv("memsize"); - if (!memsize_str) - memsize = 0x04000000; - else - strict_strtoul(memsize_str, 0, &memsize); - add_memory_region(0, memsize, BOOT_MEM_RAM); -} - -void prom_putchar(unsigned char c) -{ - alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); -} diff --git a/arch/mips/alchemy/xxs1500/Makefile b/arch/mips/alchemy/xxs1500/Makefile deleted file mode 100644 index 91defcf4f335..000000000000 --- a/arch/mips/alchemy/xxs1500/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2003 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# -# Makefile for MyCable XXS1500 board. -# - -obj-y += init.o board_setup.o platform.o diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c deleted file mode 100644 index 3fa83f72e014..000000000000 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright 2000-2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include - -#include -#include - -#include - -static void xxs1500_reset(char *c) -{ - /* Jump to the reset vector */ - __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); -} - -static void xxs1500_power_off(void) -{ - while (1) - asm volatile ( - " .set mips32 \n" - " wait \n" - " .set mips0 \n"); -} - -void __init board_setup(void) -{ - u32 pin_func; - - pm_power_off = xxs1500_power_off; - _machine_halt = xxs1500_power_off; - _machine_restart = xxs1500_reset; - - alchemy_gpio1_input_enable(); - alchemy_gpio2_enable(); - - /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */ - pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; - pin_func |= SYS_PF_UR3; - au_writel(pin_func, SYS_PINFUNC); - - /* Enable UART */ - alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); - /* Enable DTR (MCR bit 0) = USB power up */ - __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18)); - wmb(); -} - -static int __init xxs1500_init_irq(void) -{ - irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); - irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW); - - irq_set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */ - irq_set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); - - return 0; -} -arch_initcall(xxs1500_init_irq); diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c deleted file mode 100644 index 0ee02cfa989d..000000000000 --- a/arch/mips/alchemy/xxs1500/init.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * XXS1500 board setup - * - * Copyright 2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include -#include - -#include - -const char *get_system_type(void) -{ - return "XXS1500"; -} - -void __init prom_init(void) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - - memsize_str = prom_getenv("memsize"); - if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize)) - memsize = 0x04000000; - - add_memory_region(0, memsize, BOOT_MEM_RAM); -} - -void prom_putchar(unsigned char c) -{ - alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); -} diff --git a/arch/mips/alchemy/xxs1500/platform.c b/arch/mips/alchemy/xxs1500/platform.c deleted file mode 100644 index 06a3a459b8aa..000000000000 --- a/arch/mips/alchemy/xxs1500/platform.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * XXS1500 board platform device registration - * - * Copyright (C) 2009 Manuel Lauss - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include - -#include - -static struct resource xxs1500_pcmcia_res[] = { - { - .name = "pcmcia-io", - .flags = IORESOURCE_MEM, - .start = AU1000_PCMCIA_IO_PHYS_ADDR, - .end = AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1, - }, - { - .name = "pcmcia-attr", - .flags = IORESOURCE_MEM, - .start = AU1000_PCMCIA_ATTR_PHYS_ADDR, - .end = AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - }, - { - .name = "pcmcia-mem", - .flags = IORESOURCE_MEM, - .start = AU1000_PCMCIA_MEM_PHYS_ADDR, - .end = AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - }, -}; - -static struct platform_device xxs1500_pcmcia_dev = { - .name = "xxs1500_pcmcia", - .id = -1, - .num_resources = ARRAY_SIZE(xxs1500_pcmcia_res), - .resource = xxs1500_pcmcia_res, -}; - -static struct platform_device *xxs1500_devs[] __initdata = { - &xxs1500_pcmcia_dev, -}; - -static int __init xxs1500_dev_init(void) -{ - return platform_add_devices(xxs1500_devs, - ARRAY_SIZE(xxs1500_devs)); -} -device_initcall(xxs1500_dev_init); diff --git a/arch/mips/boot/compressed/uart-alchemy.c b/arch/mips/boot/compressed/uart-alchemy.c index eb063e6dead9..3112df8f90db 100644 --- a/arch/mips/boot/compressed/uart-alchemy.c +++ b/arch/mips/boot/compressed/uart-alchemy.c @@ -2,6 +2,9 @@ void putc(char c) { - /* all current (Jan. 2010) in-kernel boards */ +#ifdef CONFIG_MIPS_DB1300 + alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c); +#else alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); +#endif } diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 4044c9e0fb73..17a36c125172 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -1,118 +1,359 @@ +CONFIG_MIPS=y CONFIG_MIPS_ALCHEMY=y +CONFIG_MIPS_DB1000=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_HZ_100=y -# CONFIG_SECCOMP is not set +CONFIG_HZ=100 +CONFIG_PREEMPT_NONE=y CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-db1000" +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +CONFIG_LOCALVERSION="-db1x00" +CONFIG_LOCALVERSION_AUTO=y CONFIG_KERNEL_LZMA=y +CONFIG_DEFAULT_HOSTNAME="db1x00" +CONFIG_SWAP=y CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_FHANDLE=y +CONFIG_AUDIT=y CONFIG_TINY_RCU=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_SYSCTL=y CONFIG_EXPERT=y -# CONFIG_KALLSYMS is not set -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_COMPAT_BRK is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_EMBEDDED=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set +CONFIG_SLABINFO=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_IOSCHED_NOOP=y +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_FREEZER=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y CONFIG_PCCARD=y +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y -CONFIG_PM=y +CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_PM_SLEEP=y CONFIG_PM_RUNTIME=y +CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y +CONFIG_XFRM=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_NET_IPIP=y +CONFIG_INET_TUNNEL=y +CONFIG_INET_LRO=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_IPV6=y +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_STP=y +CONFIG_GARP=y +CONFIG_BRIDGE=y +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_VLAN_8021Q=y +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_LLC=y +CONFIG_LLC2=y +CONFIG_DNS_RESOLVER=y +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y +CONFIG_BT_HCIBTUSB=y +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI_I4=y +CONFIG_MTD_CFI_I8=y +CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP=y -# CONFIG_MISC_DEVICES is not set +CONFIG_SCSI_MOD=y +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_PROC_FS=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_ATA=y +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_ATA_SFF=y +CONFIG_ATA_BMDMA=y +CONFIG_PATA_HPT37X=y +CONFIG_PATA_PCMCIA=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y +CONFIG_FIREWIRE=y +CONFIG_FIREWIRE_OHCI=y +CONFIG_FIREWIRE_OHCI_DEBUG=y +CONFIG_FIREWIRE_NET=y CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_BROADCOM_PHY=y -CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y -CONFIG_NATIONAL_PHY=y -CONFIG_STE10XP=y -CONFIG_LSI_ET1011C_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_PHYLIB=y +CONFIG_NET_ETHERNET=y CONFIG_MIPS_AU1X00_ENET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_NET_PCMCIA=y +CONFIG_PCMCIA_3C589=y +CONFIG_PCMCIA_PCNET=y +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=y +CONFIG_PPP_SYNC_TTY=y +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +CONFIG_PPP_MPPE=y +CONFIG_PPPOE=y +CONFIG_INPUT=y CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_TTY_PRINTK=y +CONFIG_DEVPORT=y +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_AU1100=y +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FONTS=y +CONFIG_FONT_8x16=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_HRTIMER=y +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_SOC=y +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC_AU1XAUDIO=y +CONFIG_SND_SOC_AU1XAC97C=y +CONFIG_SND_SOC_DB1000=y +CONFIG_SND_SOC_AC97_CODEC=y +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HIDRAW=y +CONFIG_USB_HID=y +CONFIG_USB_SUPPORT=y CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_SUSPEND=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_AU1XXX=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_USE_FOR_EXT23=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_JBD2=y +CONFIG_FS_MBCACHE=y +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_GENERIC_ACL=y +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y CONFIG_TMPFS=y -CONFIG_CRAMFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TMPFS_XATTR=y +CONFIG_MISC_FILESYSTEMS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +CONFIG_JFFS2_CMODE_PRIORITY=y CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_ZLIB=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_PNFS_FILE_LAYOUT=y +CONFIG_PNFS_BLOCK=y CONFIG_ROOT_NFS=y +CONFIG_NFS_USE_KERNEL_DNS=y +CONFIG_NFS_USE_NEW_IDMAPPER=y +CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BACKCHANNEL=y +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_FTRACE is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_EARLY_PRINTK=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="noirqdebug rootwait root=/dev/sda1 rootfstype=ext4 console=ttyS0,115200 video=au1100fb:panel:CRT_800x600_16" CONFIG_DEBUG_ZBOOT=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITYFS=y +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_XZ_DEC=y diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig deleted file mode 100644 index c6b49938ee84..000000000000 --- a/arch/mips/configs/db1100_defconfig +++ /dev/null @@ -1,122 +0,0 @@ -CONFIG_MIPS_ALCHEMY=y -CONFIG_MIPS_DB1100=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_HZ_100=y -# CONFIG_SECCOMP is not set -CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-db1100" -CONFIG_KERNEL_LZMA=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_TINY_RCU=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_PCCARD=y -CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y -CONFIG_PM=y -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_IDE_TASK_IOCTL=y -CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_BROADCOM_PHY=y -CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y -CONFIG_NATIONAL_PHY=y -CONFIG_STE10XP=y -CONFIG_LSI_ET1011C_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MIPS_AU1X00_ENET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_AU1100=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x16=y -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_SUSPEND=y -CONFIG_USB_OHCI_HCD=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AU1XXX=y -CONFIG_EXT2_FS=y -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_SQUASHFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_FTRACE is not set -CONFIG_DEBUG_ZBOOT=y -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -CONFIG_SECURITYFS=y diff --git a/arch/mips/configs/db1300_defconfig b/arch/mips/configs/db1300_defconfig new file mode 100644 index 000000000000..c38b190151c4 --- /dev/null +++ b/arch/mips/configs/db1300_defconfig @@ -0,0 +1,391 @@ +CONFIG_MIPS=y +CONFIG_MIPS_ALCHEMY=y +CONFIG_ALCHEMY_GPIOINT_AU1300=y +CONFIG_MIPS_DB1300=y +CONFIG_SOC_AU1300=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_DMA_COHERENT=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y +CONFIG_GENERIC_GPIO=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_CPU_MIPS32_R1=y +CONFIG_SYS_SUPPORTS_ZBOOT=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_32BIT=y +CONFIG_PAGE_SIZE_4KB=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +CONFIG_64BIT_PHYS_ADDR=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NEED_PER_CPU_KM=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_HZ_100=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=100 +CONFIG_PREEMPT_NONE=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y +CONFIG_HAVE_IRQ_WORK=y +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +CONFIG_LOCALVERSION="-db1300" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_LZMA=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_FHANDLE=y +CONFIG_HAVE_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_TINY_RCU=y +CONFIG_LOG_BUF_SHIFT=19 +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EXPERT=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_EMBEDDED=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_SLAB=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +CONFIG_IOSCHED_NOOP=y +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_INLINE_SPIN_UNLOCK=y +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +CONFIG_INLINE_READ_UNLOCK=y +CONFIG_INLINE_READ_UNLOCK_IRQ=y +CONFIG_INLINE_WRITE_UNLOCK=y +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_MMU=y +CONFIG_PCCARD=y +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y +CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_TRAD_SIGNALS=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_INET_TUNNEL=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_IPV6=y +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_UB=y +CONFIG_HAVE_IDE=y +CONFIG_IDE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +CONFIG_BLK_DEV_IDECS=y +CONFIG_IDE_TASK_IOCTL=y +CONFIG_IDE_PROC_FS=y +CONFIG_BLK_DEV_PLATFORM=y +CONFIG_SCSI_MOD=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_PHYLIB=y +CONFIG_SMSC_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_SMSC911X=y +CONFIG_INPUT=y +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_WM97XX=y +CONFIG_TOUCHSCREEN_WM9712=y +CONFIG_TOUCHSCREEN_WM9713=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_SMBUS=y +CONFIG_I2C_AU1550=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_AU1550=y +CONFIG_SPI_BITBANG=y +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_HWMON=y +CONFIG_HWMON_VID=y +CONFIG_SENSORS_ADM1025=y +CONFIG_FB=y +CONFIG_FB_AU1200=y +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_ACORN_8x8=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_HRTIMER=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_SOC=y +CONFIG_SND_SOC_CACHE_LZO=y +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC_AU1XPSC=y +CONFIG_SND_SOC_AU1XPSC_I2S=y +CONFIG_SND_SOC_AU1XPSC_AC97=y +CONFIG_SND_SOC_DB1300=y +CONFIG_SND_SOC_I2C_AND_SPI=y +CONFIG_SND_SOC_WM8731=y +CONFIG_SND_SOC_WM9712=y +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HIDRAW=y +CONFIG_USB_HID=y +CONFIG_USB_HIDDEV=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_AU1XXX=y +CONFIG_EXT2_FS=y +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_GENERIC_ACL=y +CONFIG_FAT_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TMPFS_XATTR=y +CONFIG_MISC_FILESYSTEMS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +CONFIG_JFFS2_CMODE_PRIORITY=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_UTF8=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y +CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACING_SUPPORT=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_EARLY_PRINTK=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="video=au1200fb:panel:bs console=tty console=ttyS2,115200" +CONFIG_DEBUG_ZBOOT=y +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y +CONFIG_BITREVERSE=y +CONFIG_CRC32=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_XZ_DEC=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig deleted file mode 100644 index b6e21c7cb6bd..000000000000 --- a/arch/mips/configs/db1500_defconfig +++ /dev/null @@ -1,128 +0,0 @@ -CONFIG_MIPS_ALCHEMY=y -CONFIG_MIPS_DB1500=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_HZ_100=y -# CONFIG_SECCOMP is not set -CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-db1500" -CONFIG_KERNEL_LZMA=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -# CONFIG_KALLSYMS is not set -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_PCI=y -CONFIG_PCCARD=y -# CONFIG_CARDBUS is not set -CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y -CONFIG_PM=y -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECS=y -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_BROADCOM_PHY=y -CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y -CONFIG_NATIONAL_PHY=y -CONFIG_STE10XP=y -CONFIG_LSI_ET1011C_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MIPS_AU1X00_ENET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_PCI is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_ARB is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_SUSPEND=y -CONFIG_USB_OHCI_HCD=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AU1XXX=y -CONFIG_EXT2_FS=y -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_SQUASHFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_FTRACE is not set -CONFIG_DEBUG_ZBOOT=y -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -CONFIG_SECURITYFS=y diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 798a553c9e80..36cda27725e7 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -1,145 +1,262 @@ +CONFIG_MIPS=y CONFIG_MIPS_ALCHEMY=y CONFIG_MIPS_DB1550=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_GPIO=y +CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_HZ_100=y -# CONFIG_SECCOMP is not set +CONFIG_HZ=100 CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-db1550" +CONFIG_LOCALVERSION_AUTO=y CONFIG_KERNEL_LZMA=y +CONFIG_DEFAULT_HOSTNAME="db1550" +CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_FHANDLE=y +CONFIG_AUDIT=y CONFIG_TINY_RCU=y -CONFIG_LOG_BUF_SHIFT=14 +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_COMPAT_BRK is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_EMBEDDED=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_IOSCHED_NOOP=y +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" CONFIG_PCI=y CONFIG_PCCARD=y -# CONFIG_CARDBUS is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y -CONFIG_PM=y +CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_BINFMT_MISC=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_PM_SLEEP=y CONFIG_PM_RUNTIME=y +CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y +CONFIG_XFRM=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_INET_TUNNEL=y +CONFIG_INET_LRO=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_IPV6=y +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_DNS_RESOLVER=y +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND_ECC=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_AU1550=y -CONFIG_BLK_DEV_UB=y -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECS=y -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set -CONFIG_IDE_TASK_IOCTL=y -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -CONFIG_BLK_DEV_HPT366=y +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_AT24=y +CONFIG_SCSI_MOD=y +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_ATA=y +CONFIG_ATA_SFF=y +CONFIG_ATA_BMDMA=y +CONFIG_PATA_HPT37X=y +CONFIG_PATA_PCMCIA=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_BROADCOM_PHY=y -CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y -CONFIG_NATIONAL_PHY=y -CONFIG_STE10XP=y -CONFIG_LSI_ET1011C_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_PHYLIB=y +CONFIG_NET_ETHERNET=y CONFIG_MIPS_AU1X00_ENET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_NET_PCMCIA=y +CONFIG_PCMCIA_3C589=y +CONFIG_PCMCIA_PCNET=y +CONFIG_INPUT=y CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_DEVPORT=y CONFIG_I2C=y -# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# CONFIG_I2C_HELPER_AUTO is not set CONFIG_I2C_AU1550=y CONFIG_SPI=y +CONFIG_SPI_MASTER=y CONFIG_SPI_AU1550=y -# CONFIG_HWMON is not set -# CONFIG_VGA_ARB is not set -# CONFIG_VGA_CONSOLE is not set +CONFIG_SPI_BITBANG=y +CONFIG_HWMON=y +CONFIG_SENSORS_ADM1025=y +CONFIG_SENSORS_LM70=y +CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SND=y -CONFIG_SND_HRTIMER=y -CONFIG_SND_DYNAMIC_MINORS=y -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PROCFS is not set -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_PCI is not set -# CONFIG_SND_SPI is not set -# CONFIG_SND_MIPS is not set -# CONFIG_SND_PCMCIA is not set +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=y CONFIG_SND_SOC=y +CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_SOC_AU1XPSC=y -# CONFIG_HID_SUPPORT is not set +CONFIG_SND_SOC_AU1XPSC_I2S=y +CONFIG_SND_SOC_AU1XPSC_AC97=y +CONFIG_SND_SOC_DB1200=y +CONFIG_SND_SOC_I2C_AND_SPI=y +CONFIG_SND_SOC_AC97_CODEC=y +CONFIG_SND_SOC_WM8731=y +CONFIG_SND_SOC_WM9712=y +CONFIG_AC97_BUS=y CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_SUSPEND=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_AU1XXX=y -CONFIG_EXT2_FS=y -# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_USE_FOR_EXT23=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_JBD2=y +CONFIG_FS_MBCACHE=y +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_FS_XATTR=y -# CONFIG_JFFS2_FS_POSIX_ACL is not set -# CONFIG_JFFS2_FS_SECURITY is not set CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y CONFIG_JFFS2_RUBIN=y +CONFIG_JFFS2_CMODE_PRIORITY=y CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_ZLIB=y +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_PNFS_FILE_LAYOUT=y +CONFIG_PNFS_BLOCK=y CONFIG_ROOT_NFS=y +CONFIG_NFS_USE_KERNEL_DNS=y +CONFIG_NFS_USE_NEW_IDMAPPER=y +CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BACKCHANNEL=y +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_CODEPAGE_852=y @@ -148,10 +265,21 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_FTRACE is not set -CONFIG_DEBUG_ZBOOT=y +CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 +CONFIG_FRAME_WARN=1024 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="noirqdebug console=ttyS0,115200 root=/dev/sda1 rootfstype=ext4" CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITYFS=y +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_BITREVERSE=y +CONFIG_CRC16=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_BCH=y +CONFIG_NLATTR=y diff --git a/arch/mips/configs/pb1200_defconfig b/arch/mips/configs/pb1200_defconfig deleted file mode 100644 index dcbe2704e5ed..000000000000 --- a/arch/mips/configs/pb1200_defconfig +++ /dev/null @@ -1,170 +0,0 @@ -CONFIG_MIPS_ALCHEMY=y -CONFIG_MIPS_PB1200=y -CONFIG_KSM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_HZ_100=y -# CONFIG_SECCOMP is not set -CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-pb1200" -CONFIG_KERNEL_LZMA=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_TINY_RCU=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_PCCARD=y -CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_UB=y -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECS=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_TASK_IOCTL=y -# CONFIG_IDE_PROC_FS is not set -CONFIG_BLK_DEV_IDE_AU1XXX=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -# CONFIG_I2C_COMPAT is not set -CONFIG_I2C_CHARDEV=y -# CONFIG_I2C_HELPER_AUTO is not set -CONFIG_I2C_AU1550=y -CONFIG_SPI=y -CONFIG_SPI_AU1550=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_SENSORS_ADM1025=y -CONFIG_SENSORS_LM70=y -CONFIG_FB=y -CONFIG_FB_AU1200=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x16=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_DYNAMIC_MINORS=y -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PROCFS is not set -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_SPI is not set -# CONFIG_SND_MIPS is not set -# CONFIG_SND_USB is not set -# CONFIG_SND_PCMCIA is not set -CONFIG_SND_SOC=y -CONFIG_SND_SOC_AU1XPSC=y -CONFIG_SND_SOC_DB1200=y -CONFIG_HIDRAW=y -CONFIG_USB_HIDDEV=y -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_OHCI_HCD=y -CONFIG_MMC=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_AU1X=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AU1XXX=y -CONFIG_EXT2_FS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_VFAT_FS=y -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_SQUASHFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_852=y -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_FTRACE is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyS0,115200" -CONFIG_DEBUG_ZBOOT=y -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -CONFIG_SECURITYFS=y diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 2f7f41873f24..79e4a0dad0d9 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -169,6 +169,7 @@ #define PRID_IMP_NETLOGIC_XLS412B 0x4c00 #define PRID_IMP_NETLOGIC_XLS408B 0x4e00 #define PRID_IMP_NETLOGIC_XLS404B 0x4f00 +#define PRID_IMP_NETLOGIC_AU13XX 0x8000 /* * Definitions for 7:0 on legacy processors diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index de24ec57dd2f..569828d3ccab 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -136,6 +136,7 @@ static inline int au1xxx_cpu_needs_config_od(void) #define ALCHEMY_CPU_AU1100 2 #define ALCHEMY_CPU_AU1550 3 #define ALCHEMY_CPU_AU1200 4 +#define ALCHEMY_CPU_AU1300 5 static inline int alchemy_get_cputype(void) { @@ -156,6 +157,9 @@ static inline int alchemy_get_cputype(void) case 0x05030000: return ALCHEMY_CPU_AU1200; break; + case 0x800c0000: + return ALCHEMY_CPU_AU1300; + break; } return ALCHEMY_CPU_UNKNOWN; @@ -166,6 +170,7 @@ static inline int alchemy_get_uarts(int type) { switch (type) { case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1300: return 4; case ALCHEMY_CPU_AU1500: case ALCHEMY_CPU_AU1200: @@ -243,6 +248,7 @@ extern unsigned long au1xxx_calc_clock(void); /* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */ void alchemy_sleep_au1000(void); void alchemy_sleep_au1550(void); +void alchemy_sleep_au1300(void); void au_sleep(void); /* USB: drivers/usb/host/alchemy-common.c */ @@ -251,6 +257,7 @@ enum alchemy_usb_block { ALCHEMY_USB_UDC0, ALCHEMY_USB_EHCI0, ALCHEMY_USB_OTG0, + ALCHEMY_USB_OHCI1, }; int alchemy_usb_control(int block, int enable); @@ -263,14 +270,92 @@ struct alchemy_pci_platdata { unsigned long pci_cfg_clr; }; -/* SOC Interrupt numbers */ +/* Multifunction pins: Each of these pins can either be assigned to the + * GPIO controller or a on-chip peripheral. + * Call "au1300_pinfunc_to_dev()" or "au1300_pinfunc_to_gpio()" to + * assign one of these to either the GPIO controller or the device. + */ +enum au1300_multifunc_pins { + /* wake-from-str pins 0-3 */ + AU1300_PIN_WAKE0 = 0, AU1300_PIN_WAKE1, AU1300_PIN_WAKE2, + AU1300_PIN_WAKE3, + /* external clock sources for PSCs: 4-5 */ + AU1300_PIN_EXTCLK0, AU1300_PIN_EXTCLK1, + /* 8bit MMC interface on SD0: 6-9 */ + AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6, + AU1300_PIN_SD0DAT7, + /* aux clk input for freqgen 3: 10 */ + AU1300_PIN_FG3AUX, + /* UART1 pins: 11-18 */ + AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR, + AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR, + AU1300_PIN_U1RX, AU1300_PIN_U1TX, + /* UART0 pins: 19-24 */ + AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR, + AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR, + /* UART2: 25-26 */ + AU1300_PIN_U2RX, AU1300_PIN_U2TX, + /* UART3: 27-28 */ + AU1300_PIN_U3RX, AU1300_PIN_U3TX, + /* LCD controller PWMs, ext pixclock: 29-31 */ + AU1300_PIN_LCDPWM0, AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN, + /* SD1 interface: 32-37 */ + AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2, + AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK, + /* SD2 interface: 38-43 */ + AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2, + AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK, + /* PSC0/1 clocks: 44-45 */ + AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK, + /* PSCs: 46-49/50-53/54-57/58-61 */ + AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0, + AU1300_PIN_PSC0D1, + AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0, + AU1300_PIN_PSC1D1, + AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_PSC2D0, + AU1300_PIN_PSC2D1, + AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0, + AU1300_PIN_PSC3D1, + /* PCMCIA interface: 62-70 */ + AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16, + AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT, + AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW, + /* camera interface H/V sync inputs: 71-72 */ + AU1300_PIN_CIMLS, AU1300_PIN_CIMFS, + /* PSC2/3 clocks: 73-74 */ + AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK, +}; +/* GPIC (Au1300) pin management: arch/mips/alchemy/common/gpioint.c */ +extern void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio); +extern void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio); +extern void au1300_set_irq_priority(unsigned int irq, int p); +extern void au1300_set_dbdma_gpio(int dchan, unsigned int gpio); + +/* Au1300 allows to disconnect certain blocks from internal power supply */ +enum au1300_vss_block { + AU1300_VSS_MPE = 0, + AU1300_VSS_BSA, + AU1300_VSS_GPE, + AU1300_VSS_MGP, +}; + +extern void au1300_vss_block_control(int block, int enable); + + +/* SOC Interrupt numbers */ +/* Au1000-style (IC0/1): 2 controllers with 32 sources each */ #define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8) #define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31) #define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_LAST + 1) #define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31) #define AU1000_MAX_INTR AU1000_INTC1_INT_LAST +/* Au1300-style (GPIC): 1 controller with up to 128 sources */ +#define ALCHEMY_GPIC_INT_BASE (MIPS_CPU_IRQ_BASE + 8) +#define ALCHEMY_GPIC_INT_NUM 128 +#define ALCHEMY_GPIC_INT_LAST (ALCHEMY_GPIC_INT_BASE + ALCHEMY_GPIC_INT_NUM - 1) + enum soc_au1000_ints { AU1000_FIRST_INT = AU1000_INTC0_INT_BASE, AU1000_UART0_INT = AU1000_FIRST_INT, @@ -591,24 +676,77 @@ enum soc_au1200_ints { #endif /* !defined (_LANGUAGE_ASSEMBLY) */ +/* Au1300 peripheral interrupt numbers */ +#define AU1300_FIRST_INT (ALCHEMY_GPIC_INT_BASE) +#define AU1300_UART1_INT (AU1300_FIRST_INT + 17) +#define AU1300_UART2_INT (AU1300_FIRST_INT + 25) +#define AU1300_UART3_INT (AU1300_FIRST_INT + 27) +#define AU1300_SD1_INT (AU1300_FIRST_INT + 32) +#define AU1300_SD2_INT (AU1300_FIRST_INT + 38) +#define AU1300_PSC0_INT (AU1300_FIRST_INT + 48) +#define AU1300_PSC1_INT (AU1300_FIRST_INT + 52) +#define AU1300_PSC2_INT (AU1300_FIRST_INT + 56) +#define AU1300_PSC3_INT (AU1300_FIRST_INT + 60) +#define AU1300_NAND_INT (AU1300_FIRST_INT + 62) +#define AU1300_DDMA_INT (AU1300_FIRST_INT + 75) +#define AU1300_MMU_INT (AU1300_FIRST_INT + 76) +#define AU1300_MPU_INT (AU1300_FIRST_INT + 77) +#define AU1300_GPU_INT (AU1300_FIRST_INT + 78) +#define AU1300_UDMA_INT (AU1300_FIRST_INT + 79) +#define AU1300_TOY_INT (AU1300_FIRST_INT + 80) +#define AU1300_TOY_MATCH0_INT (AU1300_FIRST_INT + 81) +#define AU1300_TOY_MATCH1_INT (AU1300_FIRST_INT + 82) +#define AU1300_TOY_MATCH2_INT (AU1300_FIRST_INT + 83) +#define AU1300_RTC_INT (AU1300_FIRST_INT + 84) +#define AU1300_RTC_MATCH0_INT (AU1300_FIRST_INT + 85) +#define AU1300_RTC_MATCH1_INT (AU1300_FIRST_INT + 86) +#define AU1300_RTC_MATCH2_INT (AU1300_FIRST_INT + 87) +#define AU1300_UART0_INT (AU1300_FIRST_INT + 88) +#define AU1300_SD0_INT (AU1300_FIRST_INT + 89) +#define AU1300_USB_INT (AU1300_FIRST_INT + 90) +#define AU1300_LCD_INT (AU1300_FIRST_INT + 91) +#define AU1300_BSA_INT (AU1300_FIRST_INT + 92) +#define AU1300_MPE_INT (AU1300_FIRST_INT + 93) +#define AU1300_ITE_INT (AU1300_FIRST_INT + 94) +#define AU1300_AES_INT (AU1300_FIRST_INT + 95) +#define AU1300_CIM_INT (AU1300_FIRST_INT + 96) + +/**********************************************************************/ + /* * Physical base addresses for integrated peripherals - * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 + * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 5..au1300 */ #define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */ +#define AU1300_ROM_PHYS_ADDR 0x10000000 /* 5 */ +#define AU1300_OTP_PHYS_ADDR 0x10002000 /* 5 */ +#define AU1300_VSS_PHYS_ADDR 0x10003000 /* 5 */ +#define AU1300_UART0_PHYS_ADDR 0x10100000 /* 5 */ +#define AU1300_UART1_PHYS_ADDR 0x10101000 /* 5 */ +#define AU1300_UART2_PHYS_ADDR 0x10102000 /* 5 */ +#define AU1300_UART3_PHYS_ADDR 0x10103000 /* 5 */ #define AU1000_USB_OHCI_PHYS_ADDR 0x10100000 /* 012 */ #define AU1000_USB_UDC_PHYS_ADDR 0x10200000 /* 0123 */ +#define AU1300_GPIC_PHYS_ADDR 0x10200000 /* 5 */ #define AU1000_IRDA_PHYS_ADDR 0x10300000 /* 02 */ -#define AU1200_AES_PHYS_ADDR 0x10300000 /* 4 */ +#define AU1200_AES_PHYS_ADDR 0x10300000 /* 45 */ #define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */ +#define AU1300_GPU_PHYS_ADDR 0x10500000 /* 5 */ #define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */ #define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */ #define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */ -#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 24 */ +#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 245 */ +#define AU1300_SD1_PHYS_ADDR 0x10601000 /* 5 */ +#define AU1300_SD2_PHYS_ADDR 0x10602000 /* 5 */ #define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */ +#define AU1300_SYS_PHYS_ADDR 0x10900000 /* 5 */ #define AU1550_PSC2_PHYS_ADDR 0x10A00000 /* 3 */ #define AU1550_PSC3_PHYS_ADDR 0x10B00000 /* 3 */ +#define AU1300_PSC0_PHYS_ADDR 0x10A00000 /* 5 */ +#define AU1300_PSC1_PHYS_ADDR 0x10A01000 /* 5 */ +#define AU1300_PSC2_PHYS_ADDR 0x10A02000 /* 5 */ +#define AU1300_PSC3_PHYS_ADDR 0x10A03000 /* 5 */ #define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */ #define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */ #define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */ @@ -622,37 +760,96 @@ enum soc_au1200_ints { #define AU1000_SSI1_PHYS_ADDR 0x11680000 /* 02 */ #define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */ #define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */ -#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 01234 */ +#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 012345 */ #define AU1550_PSC0_PHYS_ADDR 0x11A00000 /* 34 */ #define AU1550_PSC1_PHYS_ADDR 0x11B00000 /* 34 */ #define AU1000_MEM_PHYS_ADDR 0x14000000 /* 01234 */ #define AU1000_STATIC_MEM_PHYS_ADDR 0x14001000 /* 01234 */ +#define AU1300_UDMA_PHYS_ADDR 0x14001800 /* 5 */ #define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */ -#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */ -#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */ +#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 345 */ +#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 345 */ #define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */ #define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */ -#define AU1200_CIM_PHYS_ADDR 0x14004000 /* 4 */ +#define AU1200_CIM_PHYS_ADDR 0x14004000 /* 45 */ #define AU1500_PCI_PHYS_ADDR 0x14005000 /* 13 */ #define AU1550_PE_PHYS_ADDR 0x14008000 /* 3 */ #define AU1200_MAEBE_PHYS_ADDR 0x14010000 /* 4 */ #define AU1200_MAEFE_PHYS_ADDR 0x14012000 /* 4 */ +#define AU1300_MAEITE_PHYS_ADDR 0x14010000 /* 5 */ +#define AU1300_MAEMPE_PHYS_ADDR 0x14014000 /* 5 */ #define AU1550_USB_OHCI_PHYS_ADDR 0x14020000 /* 3 */ #define AU1200_USB_CTL_PHYS_ADDR 0x14020000 /* 4 */ #define AU1200_USB_OTG_PHYS_ADDR 0x14020020 /* 4 */ #define AU1200_USB_OHCI_PHYS_ADDR 0x14020100 /* 4 */ #define AU1200_USB_EHCI_PHYS_ADDR 0x14020200 /* 4 */ #define AU1200_USB_UDC_PHYS_ADDR 0x14022000 /* 4 */ +#define AU1300_USB_EHCI_PHYS_ADDR 0x14020000 /* 5 */ +#define AU1300_USB_OHCI0_PHYS_ADDR 0x14020400 /* 5 */ +#define AU1300_USB_OHCI1_PHYS_ADDR 0x14020800 /* 5 */ +#define AU1300_USB_CTL_PHYS_ADDR 0x14021000 /* 5 */ +#define AU1300_USB_OTG_PHYS_ADDR 0x14022000 /* 5 */ +#define AU1300_MAEBSA_PHYS_ADDR 0x14030000 /* 5 */ #define AU1100_LCD_PHYS_ADDR 0x15000000 /* 2 */ -#define AU1200_LCD_PHYS_ADDR 0x15000000 /* 4 */ +#define AU1200_LCD_PHYS_ADDR 0x15000000 /* 45 */ #define AU1500_PCI_MEM_PHYS_ADDR 0x400000000ULL /* 13 */ #define AU1500_PCI_IO_PHYS_ADDR 0x500000000ULL /* 13 */ #define AU1500_PCI_CONFIG0_PHYS_ADDR 0x600000000ULL /* 13 */ #define AU1500_PCI_CONFIG1_PHYS_ADDR 0x680000000ULL /* 13 */ -#define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 01234 */ -#define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 01234 */ -#define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 01234 */ +#define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 012345 */ +#define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 012345 */ +#define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 012345 */ +/**********************************************************************/ + + +/* + * Au1300 GPIO+INT controller (GPIC) register offsets and bits + * Registers are 128bits (0x10 bytes), divided into 4 "banks". + */ +#define AU1300_GPIC_PINVAL 0x0000 +#define AU1300_GPIC_PINVALCLR 0x0010 +#define AU1300_GPIC_IPEND 0x0020 +#define AU1300_GPIC_PRIENC 0x0030 +#define AU1300_GPIC_IEN 0x0040 /* int_mask in manual */ +#define AU1300_GPIC_IDIS 0x0050 /* int_maskclr in manual */ +#define AU1300_GPIC_DMASEL 0x0060 +#define AU1300_GPIC_DEVSEL 0x0080 +#define AU1300_GPIC_DEVCLR 0x0090 +#define AU1300_GPIC_RSTVAL 0x00a0 +/* pin configuration space. one 32bit register for up to 128 IRQs */ +#define AU1300_GPIC_PINCFG 0x1000 + +#define GPIC_GPIO_TO_BIT(gpio) \ + (1 << ((gpio) & 0x1f)) + +#define GPIC_GPIO_BANKOFF(gpio) \ + (((gpio) >> 5) * 4) + +/* Pin Control bits: who owns the pin, what does it do */ +#define GPIC_CFG_PC_GPIN 0 +#define GPIC_CFG_PC_DEV 1 +#define GPIC_CFG_PC_GPOLOW 2 +#define GPIC_CFG_PC_GPOHIGH 3 +#define GPIC_CFG_PC_MASK 3 + +/* assign pin to MIPS IRQ line */ +#define GPIC_CFG_IL_SET(x) (((x) & 3) << 2) +#define GPIC_CFG_IL_MASK (3 << 2) + +/* pin interrupt type setup */ +#define GPIC_CFG_IC_OFF (0 << 4) +#define GPIC_CFG_IC_LEVEL_LOW (1 << 4) +#define GPIC_CFG_IC_LEVEL_HIGH (2 << 4) +#define GPIC_CFG_IC_EDGE_FALL (5 << 4) +#define GPIC_CFG_IC_EDGE_RISE (6 << 4) +#define GPIC_CFG_IC_EDGE_BOTH (7 << 4) +#define GPIC_CFG_IC_MASK (7 << 4) + +/* allow interrupt to wake cpu from 'wait' */ +#define GPIC_CFG_IDLEWAKE (1 << 7) + +/***********************************************************************/ /* Au1000 SDRAM memory controller register offsets */ #define AU1000_MEM_SDMODE0 0x0000 @@ -1068,44 +1265,20 @@ enum soc_au1200_ints { #define SSI_ENABLE_CD (1 << 1) #define SSI_ENABLE_E (1 << 0) -/* IrDA Controller */ -#define IRDA_BASE 0xB0300000 -#define IR_RING_PTR_STATUS (IRDA_BASE + 0x00) -#define IR_RING_BASE_ADDR_H (IRDA_BASE + 0x04) -#define IR_RING_BASE_ADDR_L (IRDA_BASE + 0x08) -#define IR_RING_SIZE (IRDA_BASE + 0x0C) -#define IR_RING_PROMPT (IRDA_BASE + 0x10) -#define IR_RING_ADDR_CMPR (IRDA_BASE + 0x14) -#define IR_INT_CLEAR (IRDA_BASE + 0x18) -#define IR_CONFIG_1 (IRDA_BASE + 0x20) -# define IR_RX_INVERT_LED (1 << 0) -# define IR_TX_INVERT_LED (1 << 1) -# define IR_ST (1 << 2) -# define IR_SF (1 << 3) -# define IR_SIR (1 << 4) -# define IR_MIR (1 << 5) -# define IR_FIR (1 << 6) -# define IR_16CRC (1 << 7) -# define IR_TD (1 << 8) -# define IR_RX_ALL (1 << 9) -# define IR_DMA_ENABLE (1 << 10) -# define IR_RX_ENABLE (1 << 11) -# define IR_TX_ENABLE (1 << 12) -# define IR_LOOPBACK (1 << 14) -# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ - IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) -#define IR_SIR_FLAGS (IRDA_BASE + 0x24) -#define IR_ENABLE (IRDA_BASE + 0x28) -# define IR_RX_STATUS (1 << 9) -# define IR_TX_STATUS (1 << 10) -#define IR_READ_PHY_CONFIG (IRDA_BASE + 0x2C) -#define IR_WRITE_PHY_CONFIG (IRDA_BASE + 0x30) -#define IR_MAX_PKT_LEN (IRDA_BASE + 0x34) -#define IR_RX_BYTE_CNT (IRDA_BASE + 0x38) -#define IR_CONFIG_2 (IRDA_BASE + 0x3C) -# define IR_MODE_INV (1 << 0) -# define IR_ONE_PIN (1 << 1) -#define IR_INTERFACE_CONFIG (IRDA_BASE + 0x40) + +/* + * The IrDA peripheral has an IRFIRSEL pin, but on the DB/PB boards it's not + * used to select FIR/SIR mode on the transceiver but as a GPIO. Instead a + * CPLD has to be told about the mode. + */ +#define AU1000_IRDA_PHY_MODE_OFF 0 +#define AU1000_IRDA_PHY_MODE_SIR 1 +#define AU1000_IRDA_PHY_MODE_FIR 2 + +struct au1k_irda_platform_data { + void(*set_phy_mode)(int mode); +}; + /* GPIO */ #define SYS_PINFUNC 0xB190002C diff --git a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h index 94000a3b6f0b..e221659f1bca 100644 --- a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h +++ b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h @@ -130,8 +130,10 @@ struct au1xmmc_platform_data { #define SD_CONFIG2_DF (0x00000008) #define SD_CONFIG2_DC (0x00000010) #define SD_CONFIG2_xx2 (0x000000e0) +#define SD_CONFIG2_BB (0x00000080) #define SD_CONFIG2_WB (0x00000100) #define SD_CONFIG2_RW (0x00000200) +#define SD_CONFIG2_DP (0x00000400) /* diff --git a/arch/mips/include/asm/mach-au1x00/au1200fb.h b/arch/mips/include/asm/mach-au1x00/au1200fb.h new file mode 100644 index 000000000000..b3c87cc64bb9 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1200fb.h @@ -0,0 +1,14 @@ +/* + * platform data for au1200fb driver. + */ + +#ifndef _AU1200FB_PLAT_H_ +#define _AU1200FB_PLAT_H_ + +struct au1200fb_platdata { + int (*panel_index)(void); + int (*panel_init)(void); + int (*panel_shutdown)(void); +}; + +#endif diff --git a/arch/mips/include/asm/mach-au1x00/au1550nd.h b/arch/mips/include/asm/mach-au1x00/au1550nd.h new file mode 100644 index 000000000000..ad4c0a03afef --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1550nd.h @@ -0,0 +1,16 @@ +/* + * platform data for the Au1550 NAND driver + */ + +#ifndef _AU1550ND_H_ +#define _AU1550ND_H_ + +#include + +struct au1550nd_platdata { + struct mtd_partition *parts; + int num_parts; + int devwidth; /* 0 = 8bit device, 1 = 16bit device */ +}; + +#endif diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h index 323ce2d145f2..217810e18361 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -183,6 +183,37 @@ typedef volatile struct au1xxx_ddma_desc { #define AU1200_DSCR_CMD0_PSC1_SYNC 25 #define AU1200_DSCR_CMD0_CIM_SYNC 26 +#define AU1300_DSCR_CMD0_UART0_TX 0 +#define AU1300_DSCR_CMD0_UART0_RX 1 +#define AU1300_DSCR_CMD0_UART1_TX 2 +#define AU1300_DSCR_CMD0_UART1_RX 3 +#define AU1300_DSCR_CMD0_UART2_TX 4 +#define AU1300_DSCR_CMD0_UART2_RX 5 +#define AU1300_DSCR_CMD0_UART3_TX 6 +#define AU1300_DSCR_CMD0_UART3_RX 7 +#define AU1300_DSCR_CMD0_SDMS_TX0 8 +#define AU1300_DSCR_CMD0_SDMS_RX0 9 +#define AU1300_DSCR_CMD0_SDMS_TX1 10 +#define AU1300_DSCR_CMD0_SDMS_RX1 11 +#define AU1300_DSCR_CMD0_AES_TX 12 +#define AU1300_DSCR_CMD0_AES_RX 13 +#define AU1300_DSCR_CMD0_PSC0_TX 14 +#define AU1300_DSCR_CMD0_PSC0_RX 15 +#define AU1300_DSCR_CMD0_PSC1_TX 16 +#define AU1300_DSCR_CMD0_PSC1_RX 17 +#define AU1300_DSCR_CMD0_PSC2_TX 18 +#define AU1300_DSCR_CMD0_PSC2_RX 19 +#define AU1300_DSCR_CMD0_PSC3_TX 20 +#define AU1300_DSCR_CMD0_PSC3_RX 21 +#define AU1300_DSCR_CMD0_LCD 22 +#define AU1300_DSCR_CMD0_NAND_FLASH 23 +#define AU1300_DSCR_CMD0_SDMS_TX2 24 +#define AU1300_DSCR_CMD0_SDMS_RX2 25 +#define AU1300_DSCR_CMD0_CIM_SYNC 26 +#define AU1300_DSCR_CMD0_UDMA 27 +#define AU1300_DSCR_CMD0_DMA_REQ0 28 +#define AU1300_DSCR_CMD0_DMA_REQ1 29 + #define DSCR_CMD0_THROTTLE 30 #define DSCR_CMD0_ALWAYS 31 #define DSCR_NDEV_IDS 32 diff --git a/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h index d5df0cab9b87..3f741af37d47 100644 --- a/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h @@ -13,12 +13,14 @@ #define cpu_has_4k_cache 1 #define cpu_has_tx39_cache 0 #define cpu_has_fpu 0 +#define cpu_has_32fpr 0 #define cpu_has_counter 1 #define cpu_has_watch 1 #define cpu_has_divec 1 #define cpu_has_vce 0 #define cpu_has_cache_cdex_p 0 #define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 #define cpu_has_mcheck 1 #define cpu_has_ejtag 1 #define cpu_has_llsc 1 @@ -29,6 +31,7 @@ #define cpu_has_vtag_icache 0 #define cpu_has_dc_aliases 0 #define cpu_has_ic_fills_f_dc 1 +#define cpu_has_pindexed_dcache 0 #define cpu_has_mips32r1 1 #define cpu_has_mips32r2 0 #define cpu_has_mips64r1 0 diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h new file mode 100644 index 000000000000..556e1be20bf6 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h @@ -0,0 +1,241 @@ +/* + * gpio-au1300.h -- GPIO control for Au1300 GPIC and compatibles. + * + * Copyright (c) 2009-2011 Manuel Lauss + */ + +#ifndef _GPIO_AU1300_H_ +#define _GPIO_AU1300_H_ + +#include +#include +#include + +/* with the current GPIC design, up to 128 GPIOs are possible. + * The only implementation so far is in the Au1300, which has 75 externally + * available GPIOs. + */ +#define AU1300_GPIO_BASE 0 +#define AU1300_GPIO_NUM 75 +#define AU1300_GPIO_MAX (AU1300_GPIO_BASE + AU1300_GPIO_NUM - 1) + +#define AU1300_GPIC_ADDR \ + (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR) + +static inline int au1300_gpio_get_value(unsigned int gpio) +{ + void __iomem *roff = AU1300_GPIC_ADDR; + int bit; + + gpio -= AU1300_GPIO_BASE; + roff += GPIC_GPIO_BANKOFF(gpio); + bit = GPIC_GPIO_TO_BIT(gpio); + return __raw_readl(roff + AU1300_GPIC_PINVAL) & bit; +} + +static inline int au1300_gpio_direction_input(unsigned int gpio) +{ + void __iomem *roff = AU1300_GPIC_ADDR; + unsigned long bit; + + gpio -= AU1300_GPIO_BASE; + + roff += GPIC_GPIO_BANKOFF(gpio); + bit = GPIC_GPIO_TO_BIT(gpio); + __raw_writel(bit, roff + AU1300_GPIC_DEVCLR); + wmb(); + + return 0; +} + +static inline int au1300_gpio_set_value(unsigned int gpio, int v) +{ + void __iomem *roff = AU1300_GPIC_ADDR; + unsigned long bit; + + gpio -= AU1300_GPIO_BASE; + + roff += GPIC_GPIO_BANKOFF(gpio); + bit = GPIC_GPIO_TO_BIT(gpio); + __raw_writel(bit, roff + (v ? AU1300_GPIC_PINVAL + : AU1300_GPIC_PINVALCLR)); + wmb(); + + return 0; +} + +static inline int au1300_gpio_direction_output(unsigned int gpio, int v) +{ + /* hw switches to output automatically */ + return au1300_gpio_set_value(gpio, v); +} + +static inline int au1300_gpio_to_irq(unsigned int gpio) +{ + return AU1300_FIRST_INT + (gpio - AU1300_GPIO_BASE); +} + +static inline int au1300_irq_to_gpio(unsigned int irq) +{ + return (irq - AU1300_FIRST_INT) + AU1300_GPIO_BASE; +} + +static inline int au1300_gpio_is_valid(unsigned int gpio) +{ + int ret; + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1300: + ret = ((gpio >= AU1300_GPIO_BASE) && (gpio <= AU1300_GPIO_MAX)); + break; + default: + ret = 0; + } + return ret; +} + +static inline int au1300_gpio_cansleep(unsigned int gpio) +{ + return 0; +} + +/* hardware remembers gpio 0-63 levels on powerup */ +static inline int au1300_gpio_getinitlvl(unsigned int gpio) +{ + void __iomem *roff = AU1300_GPIC_ADDR; + unsigned long v; + + if (unlikely(gpio > 63)) + return 0; + else if (gpio > 31) { + gpio -= 32; + roff += 4; + } + + v = __raw_readl(roff + AU1300_GPIC_RSTVAL); + return (v >> gpio) & 1; +} + +/**********************************************************************/ + +/* Linux gpio framework integration. +* +* 4 use cases of Alchemy GPIOS: +*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y: +* Board must register gpiochips. +*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n: +* A gpiochip for the 75 GPIOs is registered. +* +*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y: +* the boards' gpio.h must provide the linux gpio wrapper functions, +* +*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n: +* inlinable gpio functions are provided which enable access to the +* Au1300 gpios only by using the numbers straight out of the data- +* sheets. + +* Cases 1 and 3 are intended for boards which want to provide their own +* GPIO namespace and -operations (i.e. for example you have 8 GPIOs +* which are in part provided by spare Au1300 GPIO pins and in part by +* an external FPGA but you still want them to be accssible in linux +* as gpio0-7. The board can of course use the alchemy_gpioX_* functions +* as required). +*/ + +#ifndef CONFIG_GPIOLIB + +#ifdef CONFIG_ALCHEMY_GPIOINT_AU1300 + +#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (4) */ + +static inline int gpio_direction_input(unsigned int gpio) +{ + return au1300_gpio_direction_input(gpio); +} + +static inline int gpio_direction_output(unsigned int gpio, int v) +{ + return au1300_gpio_direction_output(gpio, v); +} + +static inline int gpio_get_value(unsigned int gpio) +{ + return au1300_gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int v) +{ + au1300_gpio_set_value(gpio, v); +} + +static inline int gpio_get_value_cansleep(unsigned gpio) +{ + return gpio_get_value(gpio); +} + +static inline void gpio_set_value_cansleep(unsigned gpio, int value) +{ + gpio_set_value(gpio, value); +} + +static inline int gpio_is_valid(unsigned int gpio) +{ + return au1300_gpio_is_valid(gpio); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return au1300_gpio_cansleep(gpio); +} + +static inline int gpio_to_irq(unsigned int gpio) +{ + return au1300_gpio_to_irq(gpio); +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return au1300_irq_to_gpio(irq); +} + +static inline int gpio_request(unsigned int gpio, const char *label) +{ + return 0; +} + +static inline void gpio_free(unsigned int gpio) +{ +} + +static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) +{ + return -ENOSYS; +} + +static inline void gpio_unexport(unsigned gpio) +{ +} + +static inline int gpio_export(unsigned gpio, bool direction_may_change) +{ + return -ENOSYS; +} + +static inline int gpio_sysfs_set_active_low(unsigned gpio, int value) +{ + return -ENOSYS; +} + +static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) +{ + return -ENOSYS; +} + +#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */ + +#endif /* CONFIG_ALCHEMY_GPIOINT_AU1300 */ + +#endif /* CONFIG GPIOLIB */ + +#endif /* _GPIO_AU1300_H_ */ diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h index fcdc8c4809db..22e7ff17fc48 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio.h +++ b/arch/mips/include/asm/mach-au1x00/gpio.h @@ -12,6 +12,7 @@ #include #include +#include /* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before * SYS_PININPUTEN is written to at least once. On Au1550/Au1200/Au1300 this @@ -58,6 +59,8 @@ static inline int __au_irq_to_gpio(unsigned int irq) switch (alchemy_get_cputype()) { case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200: return alchemy_irq_to_gpio(irq); + case ALCHEMY_CPU_AU1300: + return au1300_irq_to_gpio(irq); } return -EINVAL; } diff --git a/arch/mips/include/asm/mach-db1x00/bcsr.h b/arch/mips/include/asm/mach-db1x00/bcsr.h index 618d2de02ed3..bb9fc23d853a 100644 --- a/arch/mips/include/asm/mach-db1x00/bcsr.h +++ b/arch/mips/include/asm/mach-db1x00/bcsr.h @@ -34,6 +34,8 @@ #define PB1200_BCSR_PHYS_ADDR 0x0D800000 #define PB1200_BCSR_HEXLED_OFS 0x00400000 +#define DB1300_BCSR_PHYS_ADDR 0x19800000 +#define DB1300_BCSR_HEXLED_OFS 0x00400000 enum bcsr_id { /* BCSR base 1 */ @@ -105,6 +107,7 @@ enum bcsr_whoami_boards { BCSR_WHOAMI_PB1200 = BCSR_WHOAMI_PB1200_DDR1, BCSR_WHOAMI_PB1200_DDR2, BCSR_WHOAMI_DB1200, + BCSR_WHOAMI_DB1300, }; /* STATUS reg. Unless otherwise noted, they're valid on all boards. @@ -118,12 +121,12 @@ enum bcsr_whoami_boards { #define BCSR_STATUS_SRAMWIDTH 0x0080 #define BCSR_STATUS_FLASHBUSY 0x0100 #define BCSR_STATUS_ROMBUSY 0x0400 -#define BCSR_STATUS_SD0WP 0x0400 /* DB1200 */ +#define BCSR_STATUS_SD0WP 0x0400 /* DB1200/DB1300:SD1 */ #define BCSR_STATUS_SD1WP 0x0800 #define BCSR_STATUS_USBOTGID 0x0800 /* PB/DB1550 */ #define BCSR_STATUS_DB1000_SWAPBOOT 0x2000 -#define BCSR_STATUS_DB1200_SWAPBOOT 0x0040 /* DB1200 */ -#define BCSR_STATUS_IDECBLID 0x0200 /* DB1200 */ +#define BCSR_STATUS_DB1200_SWAPBOOT 0x0040 /* DB1200/1300 */ +#define BCSR_STATUS_IDECBLID 0x0200 /* DB1200/1300 */ #define BCSR_STATUS_DB1200_U0RXD 0x1000 /* DB1200 */ #define BCSR_STATUS_DB1200_U1RXD 0x2000 /* DB1200 */ #define BCSR_STATUS_FLASHDEN 0xC000 @@ -133,6 +136,11 @@ enum bcsr_whoami_boards { #define BCSR_STATUS_PB1550_U1RXD 0x2000 /* PB1550 */ #define BCSR_STATUS_PB1550_U3RXD 0x8000 /* PB1550 */ +#define BCSR_STATUS_CFWP 0x4000 /* DB1300 */ +#define BCSR_STATUS_USBOCn 0x2000 /* DB1300 */ +#define BCSR_STATUS_OTGOCn 0x1000 /* DB1300 */ +#define BCSR_STATUS_DCDMARQ 0x0010 /* DB1300 */ +#define BCSR_STATUS_IDEDMARQ 0x0020 /* DB1300 */ /* DB/PB1000,1100,1500,1550 */ #define BCSR_RESETS_PHY0 0x0001 @@ -155,17 +163,17 @@ enum bcsr_whoami_boards { #define BCSR_BOARD_GPIO200RST 0x0400 #define BCSR_BOARD_PCICLKOUT 0x0800 #define BCSR_BOARD_PCICFG 0x1000 -#define BCSR_BOARD_SPISEL 0x4000 /* PB/DB1550 */ +#define BCSR_BOARD_SPISEL 0x2000 /* PB/DB1550 */ #define BCSR_BOARD_SD0WP 0x4000 /* DB1100 */ #define BCSR_BOARD_SD1WP 0x8000 /* DB1100 */ -/* DB/PB1200 */ +/* DB/PB1200/1300 */ #define BCSR_RESETS_ETH 0x0001 #define BCSR_RESETS_CAMERA 0x0002 #define BCSR_RESETS_DC 0x0004 #define BCSR_RESETS_IDE 0x0008 -#define BCSR_RESETS_TV 0x0010 /* DB1200 */ +#define BCSR_RESETS_TV 0x0010 /* DB1200/1300 */ /* Not resets but in the same register */ #define BCSR_RESETS_PWMR1MUX 0x0800 /* DB1200 */ #define BCSR_RESETS_PB1200_WSCFSM 0x0800 /* PB1200 */ @@ -174,13 +182,22 @@ enum bcsr_whoami_boards { #define BCSR_RESETS_SPISEL 0x4000 #define BCSR_RESETS_SD1MUX 0x8000 /* PB1200 */ +#define BCSR_RESETS_VDDQSHDN 0x0200 /* DB1300 */ +#define BCSR_RESETS_OTPPGM 0x0400 /* DB1300 */ +#define BCSR_RESETS_OTPSCLK 0x0800 /* DB1300 */ +#define BCSR_RESETS_OTPWRPROT 0x1000 /* DB1300 */ +#define BCSR_RESETS_OTPCSB 0x2000 /* DB1300 */ +#define BCSR_RESETS_OTGPWR 0x4000 /* DB1300 */ +#define BCSR_RESETS_USBHPWR 0x8000 /* DB1300 */ + #define BCSR_BOARD_LCDVEE 0x0001 #define BCSR_BOARD_LCDVDD 0x0002 #define BCSR_BOARD_LCDBL 0x0004 #define BCSR_BOARD_CAMSNAP 0x0010 #define BCSR_BOARD_CAMPWR 0x0020 #define BCSR_BOARD_SD0PWR 0x0040 - +#define BCSR_BOARD_CAMCS 0x0010 /* DB1300 */ +#define BCSR_BOARD_HDMI_DE 0x0040 /* DB1300 */ #define BCSR_SWITCHES_DIP 0x00FF #define BCSR_SWITCHES_DIP_1 0x0080 @@ -214,7 +231,10 @@ enum bcsr_whoami_boards { #define BCSR_SYSTEM_RESET 0x8000 /* clear to reset */ #define BCSR_SYSTEM_PWROFF 0x4000 /* set to power off */ #define BCSR_SYSTEM_VDDI 0x001F /* PB1xxx boards */ - +#define BCSR_SYSTEM_DEBUGCSMASK 0x003F /* DB1300 */ +#define BCSR_SYSTEM_UDMAMODE 0x0100 /* DB1300 */ +#define BCSR_SYSTEM_WAKEONIRQ 0x0200 /* DB1300 */ +#define BCSR_SYSTEM_VDDI1300 0x3C00 /* DB1300 */ diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h index 7a39657108c4..b2a8319521e5 100644 --- a/arch/mips/include/asm/mach-db1x00/db1200.h +++ b/arch/mips/include/asm/mach-db1x00/db1200.h @@ -43,15 +43,20 @@ #define BCSR_INT_PC1EJECT 0x0800 #define BCSR_INT_SD0INSERT 0x1000 #define BCSR_INT_SD0EJECT 0x2000 +#define BCSR_INT_SD1INSERT 0x4000 +#define BCSR_INT_SD1EJECT 0x8000 -#define IDE_PHYS_ADDR 0x18800000 #define IDE_REG_SHIFT 5 -#define DB1200_IDE_PHYS_ADDR IDE_PHYS_ADDR +#define DB1200_IDE_PHYS_ADDR 0x18800000 #define DB1200_IDE_PHYS_LEN (16 << IDE_REG_SHIFT) #define DB1200_ETH_PHYS_ADDR 0x19000300 #define DB1200_NAND_PHYS_ADDR 0x20000000 +#define PB1200_IDE_PHYS_ADDR 0x0C800000 +#define PB1200_ETH_PHYS_ADDR 0x0D000300 +#define PB1200_NAND_PHYS_ADDR 0x1C000000 + /* * External Interrupts for DBAu1200 as of 8/6/2004. * Bit positions in the CPLD registers can be calculated by taking @@ -77,6 +82,8 @@ enum external_db1200_ints { DB1200_PC1_EJECT_INT, DB1200_SD0_INSERT_INT, DB1200_SD0_EJECT_INT, + PB1200_SD1_INSERT_INT, + PB1200_SD1_EJECT_INT, DB1200_INT_END = DB1200_INT_BEGIN + 15, }; diff --git a/arch/mips/include/asm/mach-db1x00/db1300.h b/arch/mips/include/asm/mach-db1x00/db1300.h new file mode 100644 index 000000000000..7fe5fb3ba877 --- /dev/null +++ b/arch/mips/include/asm/mach-db1x00/db1300.h @@ -0,0 +1,40 @@ +/* + * NetLogic DB1300 board constants + */ + +#ifndef _DB1300_H_ +#define _DB1300_H_ + +/* FPGA (external mux) interrupt sources */ +#define DB1300_FIRST_INT (ALCHEMY_GPIC_INT_LAST + 1) +#define DB1300_IDE_INT (DB1300_FIRST_INT + 0) +#define DB1300_ETH_INT (DB1300_FIRST_INT + 1) +#define DB1300_CF_INT (DB1300_FIRST_INT + 2) +#define DB1300_VIDEO_INT (DB1300_FIRST_INT + 4) +#define DB1300_HDMI_INT (DB1300_FIRST_INT + 5) +#define DB1300_DC_INT (DB1300_FIRST_INT + 6) +#define DB1300_FLASH_INT (DB1300_FIRST_INT + 7) +#define DB1300_CF_INSERT_INT (DB1300_FIRST_INT + 8) +#define DB1300_CF_EJECT_INT (DB1300_FIRST_INT + 9) +#define DB1300_AC97_INT (DB1300_FIRST_INT + 10) +#define DB1300_AC97_PEN_INT (DB1300_FIRST_INT + 11) +#define DB1300_SD1_INSERT_INT (DB1300_FIRST_INT + 12) +#define DB1300_SD1_EJECT_INT (DB1300_FIRST_INT + 13) +#define DB1300_OTG_VBUS_OC_INT (DB1300_FIRST_INT + 14) +#define DB1300_HOST_VBUS_OC_INT (DB1300_FIRST_INT + 15) +#define DB1300_LAST_INT (DB1300_FIRST_INT + 15) + +/* SMSC9210 CS */ +#define DB1300_ETH_PHYS_ADDR 0x19000000 +#define DB1300_ETH_PHYS_END 0x197fffff + +/* ATA CS */ +#define DB1300_IDE_PHYS_ADDR 0x18800000 +#define DB1300_IDE_REG_SHIFT 5 +#define DB1300_IDE_PHYS_LEN (16 << DB1300_IDE_REG_SHIFT) + +/* NAND CS */ +#define DB1300_NAND_PHYS_ADDR 0x20000000 +#define DB1300_NAND_PHYS_END 0x20000fff + +#endif /* _DB1300_H_ */ diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h deleted file mode 100644 index a5affb0568ef..000000000000 --- a/arch/mips/include/asm/mach-db1x00/db1x00.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * AMD Alchemy DBAu1x00 Reference Boards - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_DB1X00_H -#define __ASM_DB1X00_H - -#include - -#ifdef CONFIG_MIPS_DB1550 - -#define DBDMA_AC97_TX_CHAN AU1550_DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN AU1550_DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN AU1550_DSCR_CMD0_PSC3_TX -#define DBDMA_I2S_RX_CHAN AU1550_DSCR_CMD0_PSC3_RX - -#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR -#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR -#define SMBUS_PSC_BASE AU1550_PSC2_PHYS_ADDR -#define I2S_PSC_BASE AU1550_PSC3_PHYS_ADDR - -#define NAND_PHYS_ADDR 0x20000000 - -#endif - -/* - * NAND defines - * - * Timing values as described in databook, * ns value stripped of the - * lower 2 bits. - * These defines are here rather than an Au1550 generic file because - * the parts chosen on another board may be different and may require - * different timings. - */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) - -/* Bitfield shift amounts */ -#define NAND_T_H_SHIFT 0 -#define NAND_T_PUL_SHIFT 4 -#define NAND_T_SU_SHIFT 8 -#define NAND_T_WH_SHIFT 12 - -#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) -#define NAND_CS 1 - -/* Should be done by YAMON */ -#define NAND_STCFG 0x00400005 /* 8-bit NAND */ -#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ -#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ - -#endif /* __ASM_DB1X00_H */ diff --git a/arch/mips/include/asm/mach-db1x00/irq.h b/arch/mips/include/asm/mach-db1x00/irq.h new file mode 100644 index 000000000000..15b26693238f --- /dev/null +++ b/arch/mips/include/asm/mach-db1x00/irq.h @@ -0,0 +1,23 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 by Ralf Baechle + */ +#ifndef __ASM_MACH_GENERIC_IRQ_H +#define __ASM_MACH_GENERIC_IRQ_H + + +#ifdef NR_IRQS +#undef NR_IRQS +#endif + +#ifndef MIPS_CPU_IRQ_BASE +#define MIPS_CPU_IRQ_BASE 0 +#endif + +/* 8 (MIPS) + 128 (au1300) + 16 (cpld) */ +#define NR_IRQS 152 + +#endif /* __ASM_MACH_GENERIC_IRQ_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h b/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h deleted file mode 100644 index 622c58710e5b..000000000000 --- a/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 2001, 03 by Ralf Baechle - * - * RTC routines for PC style attached Dallas chip. - */ -#ifndef __ASM_MACH_AU1XX_MC146818RTC_H -#define __ASM_MACH_AU1XX_MC146818RTC_H - -#include -#include - -#define RTC_PORT(x) (0x0c000000 + (x)) -#define RTC_IRQ 8 -#define PB1500_RTC_ADDR 0x0c000000 - -static inline unsigned char CMOS_READ(unsigned long offset) -{ - offset <<= 2; - return (u8)(au_readl(offset + PB1500_RTC_ADDR) & 0xff); -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long offset) -{ - offset <<= 2; - au_writel(data, offset + PB1500_RTC_ADDR); -} - -#define RTC_ALWAYS_BCD 1 - -#endif /* __ASM_MACH_AU1XX_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1000.h b/arch/mips/include/asm/mach-pb1x00/pb1000.h deleted file mode 100644 index 65059255dc1e..000000000000 --- a/arch/mips/include/asm/mach-pb1x00/pb1000.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Alchemy Semi Pb1000 Reference Board - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1000_H -#define __ASM_PB1000_H - -/* PCMCIA PB1000 specific defines */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -#define PB1000_PCR 0xBE000000 -# define PCR_SLOT_0_VPP0 (1 << 0) -# define PCR_SLOT_0_VPP1 (1 << 1) -# define PCR_SLOT_0_VCC0 (1 << 2) -# define PCR_SLOT_0_VCC1 (1 << 3) -# define PCR_SLOT_0_RST (1 << 4) -# define PCR_SLOT_1_VPP0 (1 << 8) -# define PCR_SLOT_1_VPP1 (1 << 9) -# define PCR_SLOT_1_VCC0 (1 << 10) -# define PCR_SLOT_1_VCC1 (1 << 11) -# define PCR_SLOT_1_RST (1 << 12) - -#define PB1000_MDR 0xBE000004 -# define MDR_PI (1 << 5) /* PCMCIA int latch */ -# define MDR_EPI (1 << 14) /* enable PCMCIA int */ -# define MDR_CPI (1 << 15) /* clear PCMCIA int */ - -#define PB1000_ACR1 0xBE000008 -# define ACR1_SLOT_0_CD1 (1 << 0) /* card detect 1 */ -# define ACR1_SLOT_0_CD2 (1 << 1) /* card detect 2 */ -# define ACR1_SLOT_0_READY (1 << 2) /* ready */ -# define ACR1_SLOT_0_STATUS (1 << 3) /* status change */ -# define ACR1_SLOT_0_VS1 (1 << 4) /* voltage sense 1 */ -# define ACR1_SLOT_0_VS2 (1 << 5) /* voltage sense 2 */ -# define ACR1_SLOT_0_INPACK (1 << 6) /* inpack pin status */ -# define ACR1_SLOT_1_CD1 (1 << 8) /* card detect 1 */ -# define ACR1_SLOT_1_CD2 (1 << 9) /* card detect 2 */ -# define ACR1_SLOT_1_READY (1 << 10) /* ready */ -# define ACR1_SLOT_1_STATUS (1 << 11) /* status change */ -# define ACR1_SLOT_1_VS1 (1 << 12) /* voltage sense 1 */ -# define ACR1_SLOT_1_VS2 (1 << 13) /* voltage sense 2 */ -# define ACR1_SLOT_1_INPACK (1 << 14) /* inpack pin status */ - -#define CPLD_AUX0 0xBE00000C -#define CPLD_AUX1 0xBE000010 -#define CPLD_AUX2 0xBE000014 - -/* Voltage levels */ - -/* VPPEN1 - VPPEN0 */ -#define VPP_GND ((0 << 1) | (0 << 0)) -#define VPP_5V ((1 << 1) | (0 << 0)) -#define VPP_3V ((0 << 1) | (1 << 0)) -#define VPP_12V ((0 << 1) | (1 << 0)) -#define VPP_HIZ ((1 << 1) | (1 << 0)) - -/* VCCEN1 - VCCEN0 */ -#define VCC_3V ((0 << 1) | (1 << 0)) -#define VCC_5V ((1 << 1) | (0 << 0)) -#define VCC_HIZ ((0 << 1) | (0 << 0)) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT) \ - ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) -#endif /* __ASM_PB1000_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h deleted file mode 100644 index 374416adb65b..000000000000 --- a/arch/mips/include/asm/mach-pb1x00/pb1200.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * AMD Alchemy Pb1200 Reference Board - * Board Registers defines. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1200_H -#define __ASM_PB1200_H - -#include -#include -#include - -#define DBDMA_AC97_TX_CHAN AU1200_DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN AU1200_DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN AU1200_DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN AU1200_DSCR_CMD0_PSC1_RX - -/* - * SPI and SMB are muxed on the Pb1200 board. - * Refer to board documentation. - */ -#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR -#define SMBUS_PSC_BASE AU1550_PSC0_PHYS_ADDR -/* - * AC97 and I2S are muxed on the Pb1200 board. - * Refer to board documentation. - */ -#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR -#define I2S_PSC_BASE AU1550_PSC1_PHYS_ADDR - - -#define BCSR_SYSTEM_VDDI 0x001F -#define BCSR_SYSTEM_POWEROFF 0x4000 -#define BCSR_SYSTEM_RESET 0x8000 - -/* Bit positions for the different interrupt sources */ -#define BCSR_INT_IDE 0x0001 -#define BCSR_INT_ETH 0x0002 -#define BCSR_INT_PC0 0x0004 -#define BCSR_INT_PC0STSCHG 0x0008 -#define BCSR_INT_PC1 0x0010 -#define BCSR_INT_PC1STSCHG 0x0020 -#define BCSR_INT_DC 0x0040 -#define BCSR_INT_FLASHBUSY 0x0080 -#define BCSR_INT_PC0INSERT 0x0100 -#define BCSR_INT_PC0EJECT 0x0200 -#define BCSR_INT_PC1INSERT 0x0400 -#define BCSR_INT_PC1EJECT 0x0800 -#define BCSR_INT_SD0INSERT 0x1000 -#define BCSR_INT_SD0EJECT 0x2000 -#define BCSR_INT_SD1INSERT 0x4000 -#define BCSR_INT_SD1EJECT 0x8000 - -#define SMC91C111_PHYS_ADDR 0x0D000300 -#define SMC91C111_INT PB1200_ETH_INT - -#define IDE_PHYS_ADDR 0x0C800000 -#define IDE_REG_SHIFT 5 -#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT) -#define IDE_INT PB1200_IDE_INT - -#define NAND_PHYS_ADDR 0x1C000000 - -/* - * Timing values as described in databook, * ns value stripped of - * lower 2 bits. - * These defines are here rather than an Au1200 generic file because - * the parts chosen on another board may be different and may require - * different timings. - */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) - -/* Bitfield shift amounts */ -#define NAND_T_H_SHIFT 0 -#define NAND_T_PUL_SHIFT 4 -#define NAND_T_SU_SHIFT 8 -#define NAND_T_WH_SHIFT 12 - -#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) - -/* - * External Interrupts for Pb1200 as of 8/6/2004. - * Bit positions in the CPLD registers can be calculated by taking - * the interrupt define and subtracting the PB1200_INT_BEGIN value. - * - * Example: IDE bis pos is = 64 - 64 - * ETH bit pos is = 65 - 64 - */ -enum external_pb1200_ints { - PB1200_INT_BEGIN = AU1000_MAX_INTR + 1, - - PB1200_IDE_INT = PB1200_INT_BEGIN, - PB1200_ETH_INT, - PB1200_PC0_INT, - PB1200_PC0_STSCHG_INT, - PB1200_PC1_INT, - PB1200_PC1_STSCHG_INT, - PB1200_DC_INT, - PB1200_FLASHBUSY_INT, - PB1200_PC0_INSERT_INT, - PB1200_PC0_EJECT_INT, - PB1200_PC1_INSERT_INT, - PB1200_PC1_EJECT_INT, - PB1200_SD0_INSERT_INT, - PB1200_SD0_EJECT_INT, - PB1200_SD1_INSERT_INT, - PB1200_SD1_EJECT_INT, - - PB1200_INT_END = PB1200_INT_BEGIN + 15 -}; - -/* NAND chip select */ -#define NAND_CS 1 - -#endif /* __ASM_PB1200_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h deleted file mode 100644 index 443b88adebf1..000000000000 --- a/arch/mips/include/asm/mach-pb1x00/pb1550.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * AMD Alchemy Semi PB1550 Reference Board - * Board Registers defines. - * - * Copyright 2004 Embedded Edge LLC. - * Copyright 2005 Ralf Baechle (ralf@linux-mips.org) - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1550_H -#define __ASM_PB1550_H - -#include -#include - -#define DBDMA_AC97_TX_CHAN AU1550_DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN AU1550_DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN AU1550_DSCR_CMD0_PSC3_TX -#define DBDMA_I2S_RX_CHAN AU1550_DSCR_CMD0_PSC3_RX - -#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR -#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR -#define SMBUS_PSC_BASE AU1550_PSC2_PHYS_ADDR -#define I2S_PSC_BASE AU1550_PSC3_PHYS_ADDR - -/* - * Timing values as described in databook, * ns value stripped of - * lower 2 bits. - * These defines are here rather than an SOC1550 generic file because - * the parts chosen on another board may be different and may require - * different timings. - */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) - -/* Bitfield shift amounts */ -#define NAND_T_H_SHIFT 0 -#define NAND_T_PUL_SHIFT 4 -#define NAND_T_SU_SHIFT 8 -#define NAND_T_WH_SHIFT 12 - -#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) - -#define NAND_CS 1 - -/* Should be done by YAMON */ -#define NAND_STCFG 0x00400005 /* 8-bit NAND */ -#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ -#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ - -#endif /* __ASM_PB1550_H */ diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index c7d3cf1ce46e..98383995e6ac 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -1014,6 +1014,13 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) { decode_configs(c); + if ((c->processor_id & 0xff00) == PRID_IMP_NETLOGIC_AU13XX) { + c->cputype = CPU_ALCHEMY; + __cpu_name[cpu] = "Au1300"; + /* following stuff is not for Alchemy */ + return; + } + c->options = (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_COUNTER | diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index a3afac4be734..cbe7a2fb779f 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -299,11 +299,11 @@ config I2C_AT91 unless your system can cope with those limitations. config I2C_AU1550 - tristate "Au1550/Au1200 SMBus interface" + tristate "Au1550/Au1200/Au1300 SMBus interface" depends on MIPS_ALCHEMY help If you say yes to this option, support will be included for the - Au1550 and Au1200 SMBus interface. + Au1550/Au1200/Au1300 SMBus interface. This driver can also be built as a module. If so, the module will be called i2c-au1550. diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index 5d3b9ae64523..dbd0c8a4e98a 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -153,6 +153,7 @@ static inline int has_dbdma(void) { switch (alchemy_get_cputype()) { case ALCHEMY_CPU_AU1200: + case ALCHEMY_CPU_AU1300: return 1; default: return 0; @@ -768,11 +769,15 @@ static void au1xmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) config2 = au_readl(HOST_CONFIG2(host)); switch (ios->bus_width) { + case MMC_BUS_WIDTH_8: + config2 |= SD_CONFIG2_BB; + break; case MMC_BUS_WIDTH_4: + config2 &= ~SD_CONFIG2_BB; config2 |= SD_CONFIG2_WB; break; case MMC_BUS_WIDTH_1: - config2 &= ~SD_CONFIG2_WB; + config2 &= ~(SD_CONFIG2_WB | SD_CONFIG2_BB); break; } au_writel(config2, HOST_CONFIG2(host)); @@ -943,7 +948,7 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) struct mmc_host *mmc; struct au1xmmc_host *host; struct resource *r; - int ret; + int ret, iflag; mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev); if (!mmc) { @@ -982,37 +987,43 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) dev_err(&pdev->dev, "no IRQ defined\n"); goto out3; } - host->irq = r->start; - /* IRQ is shared among both SD controllers */ - ret = request_irq(host->irq, au1xmmc_irq, IRQF_SHARED, - DRIVER_NAME, host); - if (ret) { - dev_err(&pdev->dev, "cannot grab IRQ\n"); - goto out3; - } mmc->ops = &au1xmmc_ops; mmc->f_min = 450000; mmc->f_max = 24000000; - switch (alchemy_get_cputype()) { - case ALCHEMY_CPU_AU1100: - mmc->max_seg_size = AU1100_MMC_DESCRIPTOR_SIZE; - mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT; - break; - case ALCHEMY_CPU_AU1200: - mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE; - mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT; - break; - } - mmc->max_blk_size = 2048; mmc->max_blk_count = 512; mmc->ocr_avail = AU1XMMC_OCR; mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; + mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT; + + iflag = IRQF_SHARED; /* Au1100/Au1200: one int for both ctrls */ + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1100: + mmc->max_seg_size = AU1100_MMC_DESCRIPTOR_SIZE; + break; + case ALCHEMY_CPU_AU1200: + mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE; + break; + case ALCHEMY_CPU_AU1300: + iflag = 0; /* nothing is shared */ + mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE; + mmc->f_max = 52000000; + if (host->ioarea->start == AU1100_SD0_PHYS_ADDR) + mmc->caps |= MMC_CAP_8_BIT_DATA; + break; + } + + ret = request_irq(host->irq, au1xmmc_irq, iflag, DRIVER_NAME, host); + if (ret) { + dev_err(&pdev->dev, "cannot grab IRQ\n"); + goto out3; + } host->status = HOST_S_IDLE; diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c index 7dd3700f2303..73abbc3e093e 100644 --- a/drivers/mtd/nand/au1550nd.c +++ b/drivers/mtd/nand/au1550nd.c @@ -17,35 +17,19 @@ #include #include #include +#include #include +#include +#include -#ifdef CONFIG_MIPS_PB1550 -#include -#elif defined(CONFIG_MIPS_DB1550) -#include -#endif -#include -/* - * MTD structure for NAND controller - */ -static struct mtd_info *au1550_mtd = NULL; -static void __iomem *p_nand; -static int nand_width = 1; /* default x8 */ -static void (*au1550_write_byte)(struct mtd_info *, u_char); +struct au1550nd_ctx { + struct mtd_info info; + struct nand_chip chip; -/* - * Define partitions for flash device - */ -static const struct mtd_partition partition_info[] = { - { - .name = "NAND FS 0", - .offset = 0, - .size = 8 * 1024 * 1024}, - { - .name = "NAND FS 1", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL} + int cs; + void __iomem *base; + void (*write_byte)(struct mtd_info *, u_char); }; /** @@ -259,24 +243,25 @@ static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len) static void au1550_hwcontrol(struct mtd_info *mtd, int cmd) { - register struct nand_chip *this = mtd->priv; + struct au1550nd_ctx *ctx = container_of(mtd, struct au1550nd_ctx, info); + struct nand_chip *this = mtd->priv; switch (cmd) { case NAND_CTL_SETCLE: - this->IO_ADDR_W = p_nand + MEM_STNAND_CMD; + this->IO_ADDR_W = ctx->base + MEM_STNAND_CMD; break; case NAND_CTL_CLRCLE: - this->IO_ADDR_W = p_nand + MEM_STNAND_DATA; + this->IO_ADDR_W = ctx->base + MEM_STNAND_DATA; break; case NAND_CTL_SETALE: - this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR; + this->IO_ADDR_W = ctx->base + MEM_STNAND_ADDR; break; case NAND_CTL_CLRALE: - this->IO_ADDR_W = p_nand + MEM_STNAND_DATA; + this->IO_ADDR_W = ctx->base + MEM_STNAND_DATA; /* FIXME: Nobody knows why this is necessary, * but it works only that way */ udelay(1); @@ -284,7 +269,7 @@ static void au1550_hwcontrol(struct mtd_info *mtd, int cmd) case NAND_CTL_SETNCE: /* assert (force assert) chip enable */ - au_writel((1 << (4 + NAND_CS)), MEM_STNDCTL); + au_writel((1 << (4 + ctx->cs)), MEM_STNDCTL); break; case NAND_CTL_CLRNCE: @@ -331,9 +316,10 @@ static void au1550_select_chip(struct mtd_info *mtd, int chip) */ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, int page_addr) { - register struct nand_chip *this = mtd->priv; + struct au1550nd_ctx *ctx = container_of(mtd, struct au1550nd_ctx, info); + struct nand_chip *this = mtd->priv; int ce_override = 0, i; - ulong flags; + unsigned long flags = 0; /* Begin command latch cycle */ au1550_hwcontrol(mtd, NAND_CTL_SETCLE); @@ -354,9 +340,9 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i column -= 256; readcmd = NAND_CMD_READ1; } - au1550_write_byte(mtd, readcmd); + ctx->write_byte(mtd, readcmd); } - au1550_write_byte(mtd, command); + ctx->write_byte(mtd, command); /* Set ALE and clear CLE to start address cycle */ au1550_hwcontrol(mtd, NAND_CTL_CLRCLE); @@ -369,10 +355,10 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i /* Adjust columns for 16 bit buswidth */ if (this->options & NAND_BUSWIDTH_16) column >>= 1; - au1550_write_byte(mtd, column); + ctx->write_byte(mtd, column); } if (page_addr != -1) { - au1550_write_byte(mtd, (u8)(page_addr & 0xff)); + ctx->write_byte(mtd, (u8)(page_addr & 0xff)); if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 || @@ -390,11 +376,12 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i au1550_hwcontrol(mtd, NAND_CTL_SETNCE); } - au1550_write_byte(mtd, (u8)(page_addr >> 8)); + ctx->write_byte(mtd, (u8)(page_addr >> 8)); /* One more address cycle for devices > 32MiB */ if (this->chipsize > (32 << 20)) - au1550_write_byte(mtd, (u8)((page_addr >> 16) & 0x0f)); + ctx->write_byte(mtd, + ((page_addr >> 16) & 0x0f)); } /* Latch in address */ au1550_hwcontrol(mtd, NAND_CTL_CLRALE); @@ -440,121 +427,79 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i while(!this->dev_ready(mtd)); } - -/* - * Main initialization routine - */ -static int __init au1xxx_nand_init(void) +static int __devinit find_nand_cs(unsigned long nand_base) { - struct nand_chip *this; - u16 boot_swapboot = 0; /* default value */ - int retval; - u32 mem_staddr; - u32 nand_phys; + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR); + unsigned long addr, staddr, start, mask, end; + int i; - /* Allocate memory for MTD device structure and private data */ - au1550_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); - if (!au1550_mtd) { - printk("Unable to allocate NAND MTD dev structure.\n"); + for (i = 0; i < 4; i++) { + addr = 0x1000 + (i * 0x10); /* CSx */ + staddr = __raw_readl(base + addr + 0x08); /* STADDRx */ + /* figure out the decoded range of this CS */ + start = (staddr << 4) & 0xfffc0000; + mask = (staddr << 18) & 0xfffc0000; + end = (start | (start - 1)) & ~(start ^ mask); + if ((nand_base >= start) && (nand_base < end)) + return i; + } + + return -ENODEV; +} + +static int __devinit au1550nd_probe(struct platform_device *pdev) +{ + struct au1550nd_platdata *pd; + struct au1550nd_ctx *ctx; + struct nand_chip *this; + struct resource *r; + int ret, cs; + + pd = pdev->dev.platform_data; + if (!pd) { + dev_err(&pdev->dev, "missing platform data\n"); + return -ENODEV; + } + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) { + dev_err(&pdev->dev, "no memory for NAND context\n"); return -ENOMEM; } - /* Get pointer to private data */ - this = (struct nand_chip *)(&au1550_mtd[1]); - - /* Link the private data with the MTD structure */ - au1550_mtd->priv = this; - au1550_mtd->owner = THIS_MODULE; - - - /* MEM_STNDCTL: disable ints, disable nand boot */ - au_writel(0, MEM_STNDCTL); - -#ifdef CONFIG_MIPS_PB1550 - /* set gpio206 high */ - gpio_direction_input(206); - - boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1); - - switch (boot_swapboot) { - case 0: - case 2: - case 8: - case 0xC: - case 0xD: - /* x16 NAND Flash */ - nand_width = 0; - break; - case 1: - case 9: - case 3: - case 0xE: - case 0xF: - /* x8 NAND Flash */ - nand_width = 1; - break; - default: - printk("Pb1550 NAND: bad boot:swap\n"); - retval = -EINVAL; - goto outmem; + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no NAND memory resource\n"); + ret = -ENODEV; + goto out1; } -#endif - - /* Configure chip-select; normally done by boot code, e.g. YAMON */ -#ifdef NAND_STCFG - if (NAND_CS == 0) { - au_writel(NAND_STCFG, MEM_STCFG0); - au_writel(NAND_STTIME, MEM_STTIME0); - au_writel(NAND_STADDR, MEM_STADDR0); + if (request_mem_region(r->start, resource_size(r), "au1550-nand")) { + dev_err(&pdev->dev, "cannot claim NAND memory area\n"); + ret = -ENOMEM; + goto out1; } - if (NAND_CS == 1) { - au_writel(NAND_STCFG, MEM_STCFG1); - au_writel(NAND_STTIME, MEM_STTIME1); - au_writel(NAND_STADDR, MEM_STADDR1); + + ctx->base = ioremap_nocache(r->start, 0x1000); + if (!ctx->base) { + dev_err(&pdev->dev, "cannot remap NAND memory area\n"); + ret = -ENODEV; + goto out2; } - if (NAND_CS == 2) { - au_writel(NAND_STCFG, MEM_STCFG2); - au_writel(NAND_STTIME, MEM_STTIME2); - au_writel(NAND_STADDR, MEM_STADDR2); + + this = &ctx->chip; + ctx->info.priv = this; + ctx->info.owner = THIS_MODULE; + + /* figure out which CS# r->start belongs to */ + cs = find_nand_cs(r->start); + if (cs < 0) { + dev_err(&pdev->dev, "cannot detect NAND chipselect\n"); + ret = -ENODEV; + goto out3; } - if (NAND_CS == 3) { - au_writel(NAND_STCFG, MEM_STCFG3); - au_writel(NAND_STTIME, MEM_STTIME3); - au_writel(NAND_STADDR, MEM_STADDR3); - } -#endif + ctx->cs = cs; - /* Locate NAND chip-select in order to determine NAND phys address */ - mem_staddr = 0x00000000; - if (((au_readl(MEM_STCFG0) & 0x7) == 0x5) && (NAND_CS == 0)) - mem_staddr = au_readl(MEM_STADDR0); - else if (((au_readl(MEM_STCFG1) & 0x7) == 0x5) && (NAND_CS == 1)) - mem_staddr = au_readl(MEM_STADDR1); - else if (((au_readl(MEM_STCFG2) & 0x7) == 0x5) && (NAND_CS == 2)) - mem_staddr = au_readl(MEM_STADDR2); - else if (((au_readl(MEM_STCFG3) & 0x7) == 0x5) && (NAND_CS == 3)) - mem_staddr = au_readl(MEM_STADDR3); - - if (mem_staddr == 0x00000000) { - printk("Au1xxx NAND: ERROR WITH NAND CHIP-SELECT\n"); - kfree(au1550_mtd); - return 1; - } - nand_phys = (mem_staddr << 4) & 0xFFFC0000; - - p_nand = ioremap(nand_phys, 0x1000); - - /* make controller and MTD agree */ - if (NAND_CS == 0) - nand_width = au_readl(MEM_STCFG0) & (1 << 22); - if (NAND_CS == 1) - nand_width = au_readl(MEM_STCFG1) & (1 << 22); - if (NAND_CS == 2) - nand_width = au_readl(MEM_STCFG2) & (1 << 22); - if (NAND_CS == 3) - nand_width = au_readl(MEM_STCFG3) & (1 << 22); - - /* Set address of hardware control function */ this->dev_ready = au1550_device_ready; this->select_chip = au1550_select_chip; this->cmdfunc = au1550_command; @@ -565,54 +510,57 @@ static int __init au1xxx_nand_init(void) this->options = NAND_NO_AUTOINCR; - if (!nand_width) + if (pd->devwidth) this->options |= NAND_BUSWIDTH_16; - this->read_byte = (!nand_width) ? au_read_byte16 : au_read_byte; - au1550_write_byte = (!nand_width) ? au_write_byte16 : au_write_byte; + this->read_byte = (pd->devwidth) ? au_read_byte16 : au_read_byte; + ctx->write_byte = (pd->devwidth) ? au_write_byte16 : au_write_byte; this->read_word = au_read_word; - this->write_buf = (!nand_width) ? au_write_buf16 : au_write_buf; - this->read_buf = (!nand_width) ? au_read_buf16 : au_read_buf; - this->verify_buf = (!nand_width) ? au_verify_buf16 : au_verify_buf; + this->write_buf = (pd->devwidth) ? au_write_buf16 : au_write_buf; + this->read_buf = (pd->devwidth) ? au_read_buf16 : au_read_buf; + this->verify_buf = (pd->devwidth) ? au_verify_buf16 : au_verify_buf; - /* Scan to find existence of the device */ - if (nand_scan(au1550_mtd, 1)) { - retval = -ENXIO; - goto outio; + ret = nand_scan(&ctx->info, 1); + if (ret) { + dev_err(&pdev->dev, "NAND scan failed with %d\n", ret); + goto out3; } - /* Register the partitions */ - mtd_device_register(au1550_mtd, partition_info, - ARRAY_SIZE(partition_info)); + mtd_device_register(&ctx->info, pd->parts, pd->num_parts); return 0; - outio: - iounmap(p_nand); - - outmem: - kfree(au1550_mtd); - return retval; +out3: + iounmap(ctx->base); +out2: + release_mem_region(r->start, resource_size(r)); +out1: + kfree(ctx); + return ret; } -module_init(au1xxx_nand_init); - -/* - * Clean up routine - */ -static void __exit au1550_cleanup(void) +static int __devexit au1550nd_remove(struct platform_device *pdev) { - /* Release resources, unregister device */ - nand_release(au1550_mtd); + struct au1550nd_ctx *ctx = platform_get_drvdata(pdev); + struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - /* Free the MTD device structure */ - kfree(au1550_mtd); - - /* Unmap */ - iounmap(p_nand); + nand_release(&ctx->info); + iounmap(ctx->base); + release_mem_region(r->start, 0x1000); + kfree(ctx); + return 0; } -module_exit(au1550_cleanup); +static struct platform_driver au1550nd_driver = { + .driver = { + .name = "au1550-nand", + .owner = THIS_MODULE, + }, + .probe = au1550nd_probe, + .remove = __devexit_p(au1550nd_remove), +}; + +module_platform_driver(au1550nd_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Embedded Edge, LLC"); diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index d423d18b4ad6..e535137eb2d0 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -313,8 +313,12 @@ config TOSHIBA_FIR donauboe. config AU1000_FIR - tristate "Alchemy Au1000 SIR/FIR" + tristate "Alchemy IrDA SIR/FIR" depends on IRDA && MIPS_ALCHEMY + help + Say Y/M here to build suppor the the IrDA peripheral on the + Alchemy Au1000 and Au1100 SoCs. + Say M to build a module; it will be called au1k_ir.ko config SMC_IRCC_FIR tristate "SMSC IrCC (EXPERIMENTAL)" diff --git a/drivers/net/irda/au1000_ircc.h b/drivers/net/irda/au1000_ircc.h deleted file mode 100644 index c072c09a8d91..000000000000 --- a/drivers/net/irda/au1000_ircc.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Au1000 IrDA driver. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef AU1000_IRCC_H -#define AU1000_IRCC_H - -#include - -#include -#include -#include - -#define NUM_IR_IFF 1 -#define NUM_IR_DESC 64 -#define RING_SIZE_4 0x0 -#define RING_SIZE_16 0x3 -#define RING_SIZE_64 0xF -#define MAX_NUM_IR_DESC 64 -#define MAX_BUF_SIZE 2048 - -#define BPS_115200 0 -#define BPS_57600 1 -#define BPS_38400 2 -#define BPS_19200 5 -#define BPS_9600 11 -#define BPS_2400 47 - -/* Ring descriptor flags */ -#define AU_OWN (1<<7) /* tx,rx */ - -#define IR_DIS_CRC (1<<6) /* tx */ -#define IR_BAD_CRC (1<<5) /* tx */ -#define IR_NEED_PULSE (1<<4) /* tx */ -#define IR_FORCE_UNDER (1<<3) /* tx */ -#define IR_DISABLE_TX (1<<2) /* tx */ -#define IR_HW_UNDER (1<<0) /* tx */ -#define IR_TX_ERROR (IR_DIS_CRC|IR_BAD_CRC|IR_HW_UNDER) - -#define IR_PHY_ERROR (1<<6) /* rx */ -#define IR_CRC_ERROR (1<<5) /* rx */ -#define IR_MAX_LEN (1<<4) /* rx */ -#define IR_FIFO_OVER (1<<3) /* rx */ -#define IR_SIR_ERROR (1<<2) /* rx */ -#define IR_RX_ERROR (IR_PHY_ERROR|IR_CRC_ERROR| \ - IR_MAX_LEN|IR_FIFO_OVER|IR_SIR_ERROR) - -typedef struct db_dest { - struct db_dest *pnext; - volatile u32 *vaddr; - dma_addr_t dma_addr; -} db_dest_t; - - -typedef struct ring_desc { - u8 count_0; /* 7:0 */ - u8 count_1; /* 12:8 */ - u8 reserved; - u8 flags; - u8 addr_0; /* 7:0 */ - u8 addr_1; /* 15:8 */ - u8 addr_2; /* 23:16 */ - u8 addr_3; /* 31:24 */ -} ring_dest_t; - - -/* Private data for each instance */ -struct au1k_private { - - db_dest_t *pDBfree; - db_dest_t db[2*NUM_IR_DESC]; - volatile ring_dest_t *rx_ring[NUM_IR_DESC]; - volatile ring_dest_t *tx_ring[NUM_IR_DESC]; - db_dest_t *rx_db_inuse[NUM_IR_DESC]; - db_dest_t *tx_db_inuse[NUM_IR_DESC]; - u32 rx_head; - u32 tx_head; - u32 tx_tail; - u32 tx_full; - - iobuff_t rx_buff; - - struct net_device *netdev; - - struct timeval stamp; - struct timeval now; - struct qos_info qos; - struct irlap_cb *irlap; - - u8 open; - u32 speed; - u32 newspeed; - - u32 intr_work_done; /* number of Rx and Tx pkts processed in the isr */ - struct timer_list timer; - - spinlock_t lock; /* For serializing operations */ -}; -#endif /* AU1000_IRCC_H */ diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c index a3d696a9456a..fc503aa5288e 100644 --- a/drivers/net/irda/au1k_ir.c +++ b/drivers/net/irda/au1k_ir.c @@ -18,104 +18,220 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) -#include -#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) -#include -#include -#else -#error au1k_ir: unsupported board -#endif +#include +#include +#include +#include +#include +#include +#include +#include #include #include #include #include -#include "au1000_ircc.h" +#include -static int au1k_irda_net_init(struct net_device *); -static int au1k_irda_start(struct net_device *); -static int au1k_irda_stop(struct net_device *dev); -static int au1k_irda_hard_xmit(struct sk_buff *, struct net_device *); -static int au1k_irda_rx(struct net_device *); -static void au1k_irda_interrupt(int, void *); -static void au1k_tx_timeout(struct net_device *); -static int au1k_irda_ioctl(struct net_device *, struct ifreq *, int); -static int au1k_irda_set_speed(struct net_device *dev, int speed); +/* registers */ +#define IR_RING_PTR_STATUS 0x00 +#define IR_RING_BASE_ADDR_H 0x04 +#define IR_RING_BASE_ADDR_L 0x08 +#define IR_RING_SIZE 0x0C +#define IR_RING_PROMPT 0x10 +#define IR_RING_ADDR_CMPR 0x14 +#define IR_INT_CLEAR 0x18 +#define IR_CONFIG_1 0x20 +#define IR_SIR_FLAGS 0x24 +#define IR_STATUS 0x28 +#define IR_READ_PHY_CONFIG 0x2C +#define IR_WRITE_PHY_CONFIG 0x30 +#define IR_MAX_PKT_LEN 0x34 +#define IR_RX_BYTE_CNT 0x38 +#define IR_CONFIG_2 0x3C +#define IR_ENABLE 0x40 -static void *dma_alloc(size_t, dma_addr_t *); -static void dma_free(void *, size_t); +/* Config1 */ +#define IR_RX_INVERT_LED (1 << 0) +#define IR_TX_INVERT_LED (1 << 1) +#define IR_ST (1 << 2) +#define IR_SF (1 << 3) +#define IR_SIR (1 << 4) +#define IR_MIR (1 << 5) +#define IR_FIR (1 << 6) +#define IR_16CRC (1 << 7) +#define IR_TD (1 << 8) +#define IR_RX_ALL (1 << 9) +#define IR_DMA_ENABLE (1 << 10) +#define IR_RX_ENABLE (1 << 11) +#define IR_TX_ENABLE (1 << 12) +#define IR_LOOPBACK (1 << 14) +#define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ + IR_RX_ALL | IR_RX_ENABLE | IR_SF | \ + IR_16CRC) + +/* ir_status */ +#define IR_RX_STATUS (1 << 9) +#define IR_TX_STATUS (1 << 10) +#define IR_PHYEN (1 << 15) + +/* ir_write_phy_config */ +#define IR_BR(x) (((x) & 0x3f) << 10) /* baud rate */ +#define IR_PW(x) (((x) & 0x1f) << 5) /* pulse width */ +#define IR_P(x) ((x) & 0x1f) /* preamble bits */ + +/* Config2 */ +#define IR_MODE_INV (1 << 0) +#define IR_ONE_PIN (1 << 1) +#define IR_PHYCLK_40MHZ (0 << 2) +#define IR_PHYCLK_48MHZ (1 << 2) +#define IR_PHYCLK_56MHZ (2 << 2) +#define IR_PHYCLK_64MHZ (3 << 2) +#define IR_DP (1 << 4) +#define IR_DA (1 << 5) +#define IR_FLT_HIGH (0 << 6) +#define IR_FLT_MEDHI (1 << 6) +#define IR_FLT_MEDLO (2 << 6) +#define IR_FLT_LO (3 << 6) +#define IR_IEN (1 << 8) + +/* ir_enable */ +#define IR_HC (1 << 3) /* divide SBUS clock by 2 */ +#define IR_CE (1 << 2) /* clock enable */ +#define IR_C (1 << 1) /* coherency bit */ +#define IR_BE (1 << 0) /* set in big endian mode */ + +#define NUM_IR_DESC 64 +#define RING_SIZE_4 0x0 +#define RING_SIZE_16 0x3 +#define RING_SIZE_64 0xF +#define MAX_NUM_IR_DESC 64 +#define MAX_BUF_SIZE 2048 + +/* Ring descriptor flags */ +#define AU_OWN (1 << 7) /* tx,rx */ +#define IR_DIS_CRC (1 << 6) /* tx */ +#define IR_BAD_CRC (1 << 5) /* tx */ +#define IR_NEED_PULSE (1 << 4) /* tx */ +#define IR_FORCE_UNDER (1 << 3) /* tx */ +#define IR_DISABLE_TX (1 << 2) /* tx */ +#define IR_HW_UNDER (1 << 0) /* tx */ +#define IR_TX_ERROR (IR_DIS_CRC | IR_BAD_CRC | IR_HW_UNDER) + +#define IR_PHY_ERROR (1 << 6) /* rx */ +#define IR_CRC_ERROR (1 << 5) /* rx */ +#define IR_MAX_LEN (1 << 4) /* rx */ +#define IR_FIFO_OVER (1 << 3) /* rx */ +#define IR_SIR_ERROR (1 << 2) /* rx */ +#define IR_RX_ERROR (IR_PHY_ERROR | IR_CRC_ERROR | \ + IR_MAX_LEN | IR_FIFO_OVER | IR_SIR_ERROR) + +struct db_dest { + struct db_dest *pnext; + volatile u32 *vaddr; + dma_addr_t dma_addr; +}; + +struct ring_dest { + u8 count_0; /* 7:0 */ + u8 count_1; /* 12:8 */ + u8 reserved; + u8 flags; + u8 addr_0; /* 7:0 */ + u8 addr_1; /* 15:8 */ + u8 addr_2; /* 23:16 */ + u8 addr_3; /* 31:24 */ +}; + +/* Private data for each instance */ +struct au1k_private { + void __iomem *iobase; + int irq_rx, irq_tx; + + struct db_dest *pDBfree; + struct db_dest db[2 * NUM_IR_DESC]; + volatile struct ring_dest *rx_ring[NUM_IR_DESC]; + volatile struct ring_dest *tx_ring[NUM_IR_DESC]; + struct db_dest *rx_db_inuse[NUM_IR_DESC]; + struct db_dest *tx_db_inuse[NUM_IR_DESC]; + u32 rx_head; + u32 tx_head; + u32 tx_tail; + u32 tx_full; + + iobuff_t rx_buff; + + struct net_device *netdev; + struct timeval stamp; + struct timeval now; + struct qos_info qos; + struct irlap_cb *irlap; + + u8 open; + u32 speed; + u32 newspeed; + + struct timer_list timer; + + struct resource *ioarea; + struct au1k_irda_platform_data *platdata; +}; static int qos_mtt_bits = 0x07; /* 1 ms or more */ -static struct net_device *ir_devs[NUM_IR_IFF]; -static char version[] __devinitdata = - "au1k_ircc:1.2 ppopov@mvista.com\n"; #define RUN_AT(x) (jiffies + (x)) -static DEFINE_SPINLOCK(ir_lock); - -/* - * IrDA peripheral bug. You have to read the register - * twice to get the right value. - */ -u32 read_ir_reg(u32 addr) -{ - readl(addr); - return readl(addr); +static void au1k_irda_plat_set_phy_mode(struct au1k_private *p, int mode) +{ + if (p->platdata && p->platdata->set_phy_mode) + p->platdata->set_phy_mode(mode); } +static inline unsigned long irda_read(struct au1k_private *p, + unsigned long ofs) +{ + /* + * IrDA peripheral bug. You have to read the register + * twice to get the right value. + */ + (void)__raw_readl(p->iobase + ofs); + return __raw_readl(p->iobase + ofs); +} + +static inline void irda_write(struct au1k_private *p, unsigned long ofs, + unsigned long val) +{ + __raw_writel(val, p->iobase + ofs); + wmb(); +} /* * Buffer allocation/deallocation routines. The buffer descriptor returned - * has the virtual and dma address of a buffer suitable for + * has the virtual and dma address of a buffer suitable for * both, receive and transmit operations. */ -static db_dest_t *GetFreeDB(struct au1k_private *aup) +static struct db_dest *GetFreeDB(struct au1k_private *aup) { - db_dest_t *pDB; - pDB = aup->pDBfree; + struct db_dest *db; + db = aup->pDBfree; - if (pDB) { - aup->pDBfree = pDB->pnext; - } - return pDB; + if (db) + aup->pDBfree = db->pnext; + return db; } -static void ReleaseDB(struct au1k_private *aup, db_dest_t *pDB) -{ - db_dest_t *pDBfree = aup->pDBfree; - if (pDBfree) - pDBfree->pnext = pDB; - aup->pDBfree = pDB; -} - - /* DMA memory allocation, derived from pci_alloc_consistent. However, the Au1000 data cache is coherent (when programmed so), therefore we return KSEG0 address, not KSEG1. */ -static void *dma_alloc(size_t size, dma_addr_t * dma_handle) +static void *dma_alloc(size_t size, dma_addr_t *dma_handle) { void *ret; int gfp = GFP_ATOMIC | GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); + ret = (void *)__get_free_pages(gfp, get_order(size)); if (ret != NULL) { memset(ret, 0, size); @@ -125,7 +241,6 @@ static void *dma_alloc(size_t size, dma_addr_t * dma_handle) return ret; } - static void dma_free(void *vaddr, size_t size) { vaddr = (void *)KSEG0ADDR(vaddr); @@ -133,293 +248,164 @@ static void dma_free(void *vaddr, size_t size) } -static void -setup_hw_rings(struct au1k_private *aup, u32 rx_base, u32 tx_base) +static void setup_hw_rings(struct au1k_private *aup, u32 rx_base, u32 tx_base) { int i; - for (i=0; irx_ring[i] = (volatile ring_dest_t *) - (rx_base + sizeof(ring_dest_t)*i); + for (i = 0; i < NUM_IR_DESC; i++) { + aup->rx_ring[i] = (volatile struct ring_dest *) + (rx_base + sizeof(struct ring_dest) * i); } - for (i=0; itx_ring[i] = (volatile ring_dest_t *) - (tx_base + sizeof(ring_dest_t)*i); + for (i = 0; i < NUM_IR_DESC; i++) { + aup->tx_ring[i] = (volatile struct ring_dest *) + (tx_base + sizeof(struct ring_dest) * i); } } -static int au1k_irda_init(void) -{ - static unsigned version_printed = 0; - struct au1k_private *aup; - struct net_device *dev; - int err; - - if (version_printed++ == 0) printk(version); - - dev = alloc_irdadev(sizeof(struct au1k_private)); - if (!dev) - return -ENOMEM; - - dev->irq = AU1000_IRDA_RX_INT; /* TX has its own interrupt */ - err = au1k_irda_net_init(dev); - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - ir_devs[0] = dev; - printk(KERN_INFO "IrDA: Registered device %s\n", dev->name); - return 0; - -out1: - aup = netdev_priv(dev); - dma_free((void *)aup->db[0].vaddr, - MAX_BUF_SIZE * 2*NUM_IR_DESC); - dma_free((void *)aup->rx_ring[0], - 2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t))); - kfree(aup->rx_buff.head); -out: - free_netdev(dev); - return err; -} - static int au1k_irda_init_iobuf(iobuff_t *io, int size) { io->head = kmalloc(size, GFP_KERNEL); if (io->head != NULL) { - io->truesize = size; - io->in_frame = FALSE; - io->state = OUTSIDE_FRAME; - io->data = io->head; + io->truesize = size; + io->in_frame = FALSE; + io->state = OUTSIDE_FRAME; + io->data = io->head; } return io->head ? 0 : -ENOMEM; } -static const struct net_device_ops au1k_irda_netdev_ops = { - .ndo_open = au1k_irda_start, - .ndo_stop = au1k_irda_stop, - .ndo_start_xmit = au1k_irda_hard_xmit, - .ndo_tx_timeout = au1k_tx_timeout, - .ndo_do_ioctl = au1k_irda_ioctl, -}; - -static int au1k_irda_net_init(struct net_device *dev) +/* + * Set the IrDA communications speed. + */ +static int au1k_irda_set_speed(struct net_device *dev, int speed) { struct au1k_private *aup = netdev_priv(dev); - int i, retval = 0, err; - db_dest_t *pDB, *pDBfree; - dma_addr_t temp; + volatile struct ring_dest *ptxd; + unsigned long control; + int ret = 0, timeout = 10, i; - err = au1k_irda_init_iobuf(&aup->rx_buff, 14384); - if (err) - goto out1; + if (speed == aup->speed) + return ret; - dev->netdev_ops = &au1k_irda_netdev_ops; + /* disable PHY first */ + au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_OFF); + irda_write(aup, IR_STATUS, irda_read(aup, IR_STATUS) & ~IR_PHYEN); - irda_init_max_qos_capabilies(&aup->qos); - - /* The only value we must override it the baudrate */ - aup->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600| - IR_115200|IR_576000 |(IR_4000000 << 8); - - aup->qos.min_turn_time.bits = qos_mtt_bits; - irda_qos_bits_to_value(&aup->qos); - - retval = -ENOMEM; - - /* Tx ring follows rx ring + 512 bytes */ - /* we need a 1k aligned buffer */ - aup->rx_ring[0] = (ring_dest_t *) - dma_alloc(2*MAX_NUM_IR_DESC*(sizeof(ring_dest_t)), &temp); - if (!aup->rx_ring[0]) - goto out2; - - /* allocate the data buffers */ - aup->db[0].vaddr = - (void *)dma_alloc(MAX_BUF_SIZE * 2*NUM_IR_DESC, &temp); - if (!aup->db[0].vaddr) - goto out3; - - setup_hw_rings(aup, (u32)aup->rx_ring[0], (u32)aup->rx_ring[0] + 512); - - pDBfree = NULL; - pDB = aup->db; - for (i=0; i<(2*NUM_IR_DESC); i++) { - pDB->pnext = pDBfree; - pDBfree = pDB; - pDB->vaddr = - (u32 *)((unsigned)aup->db[0].vaddr + MAX_BUF_SIZE*i); - pDB->dma_addr = (dma_addr_t)virt_to_bus(pDB->vaddr); - pDB++; - } - aup->pDBfree = pDBfree; - - /* attach a data buffer to each descriptor */ - for (i=0; irx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff); - aup->rx_ring[i]->addr_1 = (u8)((pDB->dma_addr>>8) & 0xff); - aup->rx_ring[i]->addr_2 = (u8)((pDB->dma_addr>>16) & 0xff); - aup->rx_ring[i]->addr_3 = (u8)((pDB->dma_addr>>24) & 0xff); - aup->rx_db_inuse[i] = pDB; - } - for (i=0; itx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff); - aup->tx_ring[i]->addr_1 = (u8)((pDB->dma_addr>>8) & 0xff); - aup->tx_ring[i]->addr_2 = (u8)((pDB->dma_addr>>16) & 0xff); - aup->tx_ring[i]->addr_3 = (u8)((pDB->dma_addr>>24) & 0xff); - aup->tx_ring[i]->count_0 = 0; - aup->tx_ring[i]->count_1 = 0; - aup->tx_ring[i]->flags = 0; - aup->tx_db_inuse[i] = pDB; + /* disable RX/TX */ + irda_write(aup, IR_CONFIG_1, + irda_read(aup, IR_CONFIG_1) & ~(IR_RX_ENABLE | IR_TX_ENABLE)); + msleep(20); + while (irda_read(aup, IR_STATUS) & (IR_RX_STATUS | IR_TX_STATUS)) { + msleep(20); + if (!timeout--) { + printk(KERN_ERR "%s: rx/tx disable timeout\n", + dev->name); + break; + } } -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) - /* power on */ - bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, - BCSR_RESETS_IRDA_MODE_FULL); -#endif + /* disable DMA */ + irda_write(aup, IR_CONFIG_1, + irda_read(aup, IR_CONFIG_1) & ~IR_DMA_ENABLE); + msleep(20); - return 0; + /* After we disable tx/rx. the index pointers go back to zero. */ + aup->tx_head = aup->tx_tail = aup->rx_head = 0; + for (i = 0; i < NUM_IR_DESC; i++) { + ptxd = aup->tx_ring[i]; + ptxd->flags = 0; + ptxd->count_0 = 0; + ptxd->count_1 = 0; + } -out3: - dma_free((void *)aup->rx_ring[0], - 2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t))); -out2: - kfree(aup->rx_buff.head); -out1: - printk(KERN_ERR "au1k_init_module failed. Returns %d\n", retval); - return retval; + for (i = 0; i < NUM_IR_DESC; i++) { + ptxd = aup->rx_ring[i]; + ptxd->count_0 = 0; + ptxd->count_1 = 0; + ptxd->flags = AU_OWN; + } + + if (speed == 4000000) + au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_FIR); + else + au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_SIR); + + switch (speed) { + case 9600: + irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(11) | IR_PW(12)); + irda_write(aup, IR_CONFIG_1, IR_SIR_MODE); + break; + case 19200: + irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(5) | IR_PW(12)); + irda_write(aup, IR_CONFIG_1, IR_SIR_MODE); + break; + case 38400: + irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(2) | IR_PW(12)); + irda_write(aup, IR_CONFIG_1, IR_SIR_MODE); + break; + case 57600: + irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(1) | IR_PW(12)); + irda_write(aup, IR_CONFIG_1, IR_SIR_MODE); + break; + case 115200: + irda_write(aup, IR_WRITE_PHY_CONFIG, IR_PW(12)); + irda_write(aup, IR_CONFIG_1, IR_SIR_MODE); + break; + case 4000000: + irda_write(aup, IR_WRITE_PHY_CONFIG, IR_P(15)); + irda_write(aup, IR_CONFIG_1, IR_FIR | IR_DMA_ENABLE | + IR_RX_ENABLE); + break; + default: + printk(KERN_ERR "%s unsupported speed %x\n", dev->name, speed); + ret = -EINVAL; + break; + } + + aup->speed = speed; + irda_write(aup, IR_STATUS, irda_read(aup, IR_STATUS) | IR_PHYEN); + + control = irda_read(aup, IR_STATUS); + irda_write(aup, IR_RING_PROMPT, 0); + + if (control & (1 << 14)) { + printk(KERN_ERR "%s: configuration error\n", dev->name); + } else { + if (control & (1 << 11)) + printk(KERN_DEBUG "%s Valid SIR config\n", dev->name); + if (control & (1 << 12)) + printk(KERN_DEBUG "%s Valid MIR config\n", dev->name); + if (control & (1 << 13)) + printk(KERN_DEBUG "%s Valid FIR config\n", dev->name); + if (control & (1 << 10)) + printk(KERN_DEBUG "%s TX enabled\n", dev->name); + if (control & (1 << 9)) + printk(KERN_DEBUG "%s RX enabled\n", dev->name); + } + + return ret; } - -static int au1k_init(struct net_device *dev) +static void update_rx_stats(struct net_device *dev, u32 status, u32 count) { - struct au1k_private *aup = netdev_priv(dev); - int i; - u32 control; - u32 ring_address; + struct net_device_stats *ps = &dev->stats; - /* bring the device out of reset */ - control = 0xe; /* coherent, clock enable, one half system clock */ - -#ifndef CONFIG_CPU_LITTLE_ENDIAN - control |= 1; -#endif - aup->tx_head = 0; - aup->tx_tail = 0; - aup->rx_head = 0; + ps->rx_packets++; - for (i=0; irx_ring[i]->flags = AU_OWN; - } - - writel(control, IR_INTERFACE_CONFIG); - au_sync_delay(10); - - writel(read_ir_reg(IR_ENABLE) & ~0x8000, IR_ENABLE); /* disable PHY */ - au_sync_delay(1); - - writel(MAX_BUF_SIZE, IR_MAX_PKT_LEN); - - ring_address = (u32)virt_to_phys((void *)aup->rx_ring[0]); - writel(ring_address >> 26, IR_RING_BASE_ADDR_H); - writel((ring_address >> 10) & 0xffff, IR_RING_BASE_ADDR_L); - - writel(RING_SIZE_64<<8 | RING_SIZE_64<<12, IR_RING_SIZE); - - writel(1<<2 | IR_ONE_PIN, IR_CONFIG_2); /* 48MHz */ - writel(0, IR_RING_ADDR_CMPR); - - au1k_irda_set_speed(dev, 9600); - return 0; + if (status & IR_RX_ERROR) { + ps->rx_errors++; + if (status & (IR_PHY_ERROR | IR_FIFO_OVER)) + ps->rx_missed_errors++; + if (status & IR_MAX_LEN) + ps->rx_length_errors++; + if (status & IR_CRC_ERROR) + ps->rx_crc_errors++; + } else + ps->rx_bytes += count; } -static int au1k_irda_start(struct net_device *dev) +static void update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len) { - int retval; - char hwname[32]; - struct au1k_private *aup = netdev_priv(dev); - - if ((retval = au1k_init(dev))) { - printk(KERN_ERR "%s: error in au1k_init\n", dev->name); - return retval; - } - - if ((retval = request_irq(AU1000_IRDA_TX_INT, au1k_irda_interrupt, - 0, dev->name, dev))) { - printk(KERN_ERR "%s: unable to get IRQ %d\n", - dev->name, dev->irq); - return retval; - } - if ((retval = request_irq(AU1000_IRDA_RX_INT, au1k_irda_interrupt, - 0, dev->name, dev))) { - free_irq(AU1000_IRDA_TX_INT, dev); - printk(KERN_ERR "%s: unable to get IRQ %d\n", - dev->name, dev->irq); - return retval; - } - - /* Give self a hardware name */ - sprintf(hwname, "Au1000 SIR/FIR"); - aup->irlap = irlap_open(dev, &aup->qos, hwname); - netif_start_queue(dev); - - writel(read_ir_reg(IR_CONFIG_2) | 1<<8, IR_CONFIG_2); /* int enable */ - - aup->timer.expires = RUN_AT((3*HZ)); - aup->timer.data = (unsigned long)dev; - return 0; -} - -static int au1k_irda_stop(struct net_device *dev) -{ - struct au1k_private *aup = netdev_priv(dev); - - /* disable interrupts */ - writel(read_ir_reg(IR_CONFIG_2) & ~(1<<8), IR_CONFIG_2); - writel(0, IR_CONFIG_1); - writel(0, IR_INTERFACE_CONFIG); /* disable clock */ - au_sync(); - - if (aup->irlap) { - irlap_close(aup->irlap); - aup->irlap = NULL; - } - - netif_stop_queue(dev); - del_timer(&aup->timer); - - /* disable the interrupt */ - free_irq(AU1000_IRDA_TX_INT, dev); - free_irq(AU1000_IRDA_RX_INT, dev); - return 0; -} - -static void __exit au1k_irda_exit(void) -{ - struct net_device *dev = ir_devs[0]; - struct au1k_private *aup = netdev_priv(dev); - - unregister_netdev(dev); - - dma_free((void *)aup->db[0].vaddr, - MAX_BUF_SIZE * 2*NUM_IR_DESC); - dma_free((void *)aup->rx_ring[0], - 2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t))); - kfree(aup->rx_buff.head); - free_netdev(dev); -} - - -static inline void -update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len) -{ - struct au1k_private *aup = netdev_priv(dev); - struct net_device_stats *ps = &aup->stats; + struct net_device_stats *ps = &dev->stats; ps->tx_packets++; ps->tx_bytes += pkt_len; @@ -430,20 +416,18 @@ update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len) } } - static void au1k_tx_ack(struct net_device *dev) { struct au1k_private *aup = netdev_priv(dev); - volatile ring_dest_t *ptxd; + volatile struct ring_dest *ptxd; ptxd = aup->tx_ring[aup->tx_tail]; while (!(ptxd->flags & AU_OWN) && (aup->tx_tail != aup->tx_head)) { - update_tx_stats(dev, ptxd->flags, - ptxd->count_1<<8 | ptxd->count_0); + update_tx_stats(dev, ptxd->flags, + (ptxd->count_1 << 8) | ptxd->count_0); ptxd->count_0 = 0; ptxd->count_1 = 0; - au_sync(); - + wmb(); aup->tx_tail = (aup->tx_tail + 1) & (NUM_IR_DESC - 1); ptxd = aup->tx_ring[aup->tx_tail]; @@ -457,19 +441,187 @@ static void au1k_tx_ack(struct net_device *dev) if (aup->newspeed) { au1k_irda_set_speed(dev, aup->newspeed); aup->newspeed = 0; - } - else { - writel(read_ir_reg(IR_CONFIG_1) & ~IR_TX_ENABLE, - IR_CONFIG_1); - au_sync(); - writel(read_ir_reg(IR_CONFIG_1) | IR_RX_ENABLE, - IR_CONFIG_1); - writel(0, IR_RING_PROMPT); - au_sync(); + } else { + irda_write(aup, IR_CONFIG_1, + irda_read(aup, IR_CONFIG_1) & ~IR_TX_ENABLE); + irda_write(aup, IR_CONFIG_1, + irda_read(aup, IR_CONFIG_1) | IR_RX_ENABLE); + irda_write(aup, IR_RING_PROMPT, 0); } } } +static int au1k_irda_rx(struct net_device *dev) +{ + struct au1k_private *aup = netdev_priv(dev); + volatile struct ring_dest *prxd; + struct sk_buff *skb; + struct db_dest *pDB; + u32 flags, count; + + prxd = aup->rx_ring[aup->rx_head]; + flags = prxd->flags; + + while (!(flags & AU_OWN)) { + pDB = aup->rx_db_inuse[aup->rx_head]; + count = (prxd->count_1 << 8) | prxd->count_0; + if (!(flags & IR_RX_ERROR)) { + /* good frame */ + update_rx_stats(dev, flags, count); + skb = alloc_skb(count + 1, GFP_ATOMIC); + if (skb == NULL) { + dev->stats.rx_dropped++; + continue; + } + skb_reserve(skb, 1); + if (aup->speed == 4000000) + skb_put(skb, count); + else + skb_put(skb, count - 2); + skb_copy_to_linear_data(skb, (void *)pDB->vaddr, + count - 2); + skb->dev = dev; + skb_reset_mac_header(skb); + skb->protocol = htons(ETH_P_IRDA); + netif_rx(skb); + prxd->count_0 = 0; + prxd->count_1 = 0; + } + prxd->flags |= AU_OWN; + aup->rx_head = (aup->rx_head + 1) & (NUM_IR_DESC - 1); + irda_write(aup, IR_RING_PROMPT, 0); + + /* next descriptor */ + prxd = aup->rx_ring[aup->rx_head]; + flags = prxd->flags; + + } + return 0; +} + +static irqreturn_t au1k_irda_interrupt(int dummy, void *dev_id) +{ + struct net_device *dev = dev_id; + struct au1k_private *aup = netdev_priv(dev); + + irda_write(aup, IR_INT_CLEAR, 0); /* ack irda interrupts */ + + au1k_irda_rx(dev); + au1k_tx_ack(dev); + + return IRQ_HANDLED; +} + +static int au1k_init(struct net_device *dev) +{ + struct au1k_private *aup = netdev_priv(dev); + u32 enable, ring_address; + int i; + + enable = IR_HC | IR_CE | IR_C; +#ifndef CONFIG_CPU_LITTLE_ENDIAN + enable |= IR_BE; +#endif + aup->tx_head = 0; + aup->tx_tail = 0; + aup->rx_head = 0; + + for (i = 0; i < NUM_IR_DESC; i++) + aup->rx_ring[i]->flags = AU_OWN; + + irda_write(aup, IR_ENABLE, enable); + msleep(20); + + /* disable PHY */ + au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_OFF); + irda_write(aup, IR_STATUS, irda_read(aup, IR_STATUS) & ~IR_PHYEN); + msleep(20); + + irda_write(aup, IR_MAX_PKT_LEN, MAX_BUF_SIZE); + + ring_address = (u32)virt_to_phys((void *)aup->rx_ring[0]); + irda_write(aup, IR_RING_BASE_ADDR_H, ring_address >> 26); + irda_write(aup, IR_RING_BASE_ADDR_L, (ring_address >> 10) & 0xffff); + + irda_write(aup, IR_RING_SIZE, + (RING_SIZE_64 << 8) | (RING_SIZE_64 << 12)); + + irda_write(aup, IR_CONFIG_2, IR_PHYCLK_48MHZ | IR_ONE_PIN); + irda_write(aup, IR_RING_ADDR_CMPR, 0); + + au1k_irda_set_speed(dev, 9600); + return 0; +} + +static int au1k_irda_start(struct net_device *dev) +{ + struct au1k_private *aup = netdev_priv(dev); + char hwname[32]; + int retval; + + retval = au1k_init(dev); + if (retval) { + printk(KERN_ERR "%s: error in au1k_init\n", dev->name); + return retval; + } + + retval = request_irq(aup->irq_tx, &au1k_irda_interrupt, 0, + dev->name, dev); + if (retval) { + printk(KERN_ERR "%s: unable to get IRQ %d\n", + dev->name, dev->irq); + return retval; + } + retval = request_irq(aup->irq_rx, &au1k_irda_interrupt, 0, + dev->name, dev); + if (retval) { + free_irq(aup->irq_tx, dev); + printk(KERN_ERR "%s: unable to get IRQ %d\n", + dev->name, dev->irq); + return retval; + } + + /* Give self a hardware name */ + sprintf(hwname, "Au1000 SIR/FIR"); + aup->irlap = irlap_open(dev, &aup->qos, hwname); + netif_start_queue(dev); + + /* int enable */ + irda_write(aup, IR_CONFIG_2, irda_read(aup, IR_CONFIG_2) | IR_IEN); + + /* power up */ + au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_SIR); + + aup->timer.expires = RUN_AT((3 * HZ)); + aup->timer.data = (unsigned long)dev; + return 0; +} + +static int au1k_irda_stop(struct net_device *dev) +{ + struct au1k_private *aup = netdev_priv(dev); + + au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_OFF); + + /* disable interrupts */ + irda_write(aup, IR_CONFIG_2, irda_read(aup, IR_CONFIG_2) & ~IR_IEN); + irda_write(aup, IR_CONFIG_1, 0); + irda_write(aup, IR_ENABLE, 0); /* disable clock */ + + if (aup->irlap) { + irlap_close(aup->irlap); + aup->irlap = NULL; + } + + netif_stop_queue(dev); + del_timer(&aup->timer); + + /* disable the interrupt */ + free_irq(aup->irq_tx, dev); + free_irq(aup->irq_rx, dev); + + return 0; +} /* * Au1000 transmit routine. @@ -478,15 +630,12 @@ static int au1k_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev) { struct au1k_private *aup = netdev_priv(dev); int speed = irda_get_next_speed(skb); - volatile ring_dest_t *ptxd; - u32 len; + volatile struct ring_dest *ptxd; + struct db_dest *pDB; + u32 len, flags; - u32 flags; - db_dest_t *pDB; - - if (speed != aup->speed && speed != -1) { + if (speed != aup->speed && speed != -1) aup->newspeed = speed; - } if ((skb->len == 0) && (aup->newspeed)) { if (aup->tx_tail == aup->tx_head) { @@ -504,138 +653,47 @@ static int au1k_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev) printk(KERN_DEBUG "%s: tx_full\n", dev->name); netif_stop_queue(dev); aup->tx_full = 1; - return NETDEV_TX_BUSY; - } - else if (((aup->tx_head + 1) & (NUM_IR_DESC - 1)) == aup->tx_tail) { + return 1; + } else if (((aup->tx_head + 1) & (NUM_IR_DESC - 1)) == aup->tx_tail) { printk(KERN_DEBUG "%s: tx_full\n", dev->name); netif_stop_queue(dev); aup->tx_full = 1; - return NETDEV_TX_BUSY; + return 1; } pDB = aup->tx_db_inuse[aup->tx_head]; #if 0 - if (read_ir_reg(IR_RX_BYTE_CNT) != 0) { - printk("tx warning: rx byte cnt %x\n", - read_ir_reg(IR_RX_BYTE_CNT)); + if (irda_read(aup, IR_RX_BYTE_CNT) != 0) { + printk(KERN_DEBUG "tx warning: rx byte cnt %x\n", + irda_read(aup, IR_RX_BYTE_CNT)); } #endif - + if (aup->speed == 4000000) { /* FIR */ - skb_copy_from_linear_data(skb, pDB->vaddr, skb->len); + skb_copy_from_linear_data(skb, (void *)pDB->vaddr, skb->len); ptxd->count_0 = skb->len & 0xff; ptxd->count_1 = (skb->len >> 8) & 0xff; - - } - else { + } else { /* SIR */ len = async_wrap_skb(skb, (u8 *)pDB->vaddr, MAX_BUF_SIZE); ptxd->count_0 = len & 0xff; ptxd->count_1 = (len >> 8) & 0xff; ptxd->flags |= IR_DIS_CRC; - au_writel(au_readl(0xae00000c) & ~(1<<13), 0xae00000c); } ptxd->flags |= AU_OWN; - au_sync(); + wmb(); - writel(read_ir_reg(IR_CONFIG_1) | IR_TX_ENABLE, IR_CONFIG_1); - writel(0, IR_RING_PROMPT); - au_sync(); + irda_write(aup, IR_CONFIG_1, + irda_read(aup, IR_CONFIG_1) | IR_TX_ENABLE); + irda_write(aup, IR_RING_PROMPT, 0); dev_kfree_skb(skb); aup->tx_head = (aup->tx_head + 1) & (NUM_IR_DESC - 1); return NETDEV_TX_OK; } - -static inline void -update_rx_stats(struct net_device *dev, u32 status, u32 count) -{ - struct au1k_private *aup = netdev_priv(dev); - struct net_device_stats *ps = &aup->stats; - - ps->rx_packets++; - - if (status & IR_RX_ERROR) { - ps->rx_errors++; - if (status & (IR_PHY_ERROR|IR_FIFO_OVER)) - ps->rx_missed_errors++; - if (status & IR_MAX_LEN) - ps->rx_length_errors++; - if (status & IR_CRC_ERROR) - ps->rx_crc_errors++; - } - else - ps->rx_bytes += count; -} - -/* - * Au1000 receive routine. - */ -static int au1k_irda_rx(struct net_device *dev) -{ - struct au1k_private *aup = netdev_priv(dev); - struct sk_buff *skb; - volatile ring_dest_t *prxd; - u32 flags, count; - db_dest_t *pDB; - - prxd = aup->rx_ring[aup->rx_head]; - flags = prxd->flags; - - while (!(flags & AU_OWN)) { - pDB = aup->rx_db_inuse[aup->rx_head]; - count = prxd->count_1<<8 | prxd->count_0; - if (!(flags & IR_RX_ERROR)) { - /* good frame */ - update_rx_stats(dev, flags, count); - skb=alloc_skb(count+1,GFP_ATOMIC); - if (skb == NULL) { - aup->netdev->stats.rx_dropped++; - continue; - } - skb_reserve(skb, 1); - if (aup->speed == 4000000) - skb_put(skb, count); - else - skb_put(skb, count-2); - skb_copy_to_linear_data(skb, pDB->vaddr, count - 2); - skb->dev = dev; - skb_reset_mac_header(skb); - skb->protocol = htons(ETH_P_IRDA); - netif_rx(skb); - prxd->count_0 = 0; - prxd->count_1 = 0; - } - prxd->flags |= AU_OWN; - aup->rx_head = (aup->rx_head + 1) & (NUM_IR_DESC - 1); - writel(0, IR_RING_PROMPT); - au_sync(); - - /* next descriptor */ - prxd = aup->rx_ring[aup->rx_head]; - flags = prxd->flags; - - } - return 0; -} - - -static irqreturn_t au1k_irda_interrupt(int dummy, void *dev_id) -{ - struct net_device *dev = dev_id; - - writel(0, IR_INT_CLEAR); /* ack irda interrupts */ - - au1k_irda_rx(dev); - au1k_tx_ack(dev); - - return IRQ_HANDLED; -} - - /* * The Tx ring has been full longer than the watchdog timeout * value. The transmitter must be hung? @@ -653,142 +711,7 @@ static void au1k_tx_timeout(struct net_device *dev) netif_wake_queue(dev); } - -/* - * Set the IrDA communications speed. - */ -static int -au1k_irda_set_speed(struct net_device *dev, int speed) -{ - unsigned long flags; - struct au1k_private *aup = netdev_priv(dev); - u32 control; - int ret = 0, timeout = 10, i; - volatile ring_dest_t *ptxd; -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) - unsigned long irda_resets; -#endif - - if (speed == aup->speed) - return ret; - - spin_lock_irqsave(&ir_lock, flags); - - /* disable PHY first */ - writel(read_ir_reg(IR_ENABLE) & ~0x8000, IR_ENABLE); - - /* disable RX/TX */ - writel(read_ir_reg(IR_CONFIG_1) & ~(IR_RX_ENABLE|IR_TX_ENABLE), - IR_CONFIG_1); - au_sync_delay(1); - while (read_ir_reg(IR_ENABLE) & (IR_RX_STATUS | IR_TX_STATUS)) { - mdelay(1); - if (!timeout--) { - printk(KERN_ERR "%s: rx/tx disable timeout\n", - dev->name); - break; - } - } - - /* disable DMA */ - writel(read_ir_reg(IR_CONFIG_1) & ~IR_DMA_ENABLE, IR_CONFIG_1); - au_sync_delay(1); - - /* - * After we disable tx/rx. the index pointers - * go back to zero. - */ - aup->tx_head = aup->tx_tail = aup->rx_head = 0; - for (i=0; itx_ring[i]; - ptxd->flags = 0; - ptxd->count_0 = 0; - ptxd->count_1 = 0; - } - - for (i=0; irx_ring[i]; - ptxd->count_0 = 0; - ptxd->count_1 = 0; - ptxd->flags = AU_OWN; - } - - if (speed == 4000000) { -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) - bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_FIR_SEL); -#else /* Pb1000 and Pb1100 */ - writel(1<<13, CPLD_AUX1); -#endif - } - else { -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) - bcsr_mod(BCSR_RESETS, BCSR_RESETS_FIR_SEL, 0); -#else /* Pb1000 and Pb1100 */ - writel(readl(CPLD_AUX1) & ~(1<<13), CPLD_AUX1); -#endif - } - - switch (speed) { - case 9600: - writel(11<<10 | 12<<5, IR_WRITE_PHY_CONFIG); - writel(IR_SIR_MODE, IR_CONFIG_1); - break; - case 19200: - writel(5<<10 | 12<<5, IR_WRITE_PHY_CONFIG); - writel(IR_SIR_MODE, IR_CONFIG_1); - break; - case 38400: - writel(2<<10 | 12<<5, IR_WRITE_PHY_CONFIG); - writel(IR_SIR_MODE, IR_CONFIG_1); - break; - case 57600: - writel(1<<10 | 12<<5, IR_WRITE_PHY_CONFIG); - writel(IR_SIR_MODE, IR_CONFIG_1); - break; - case 115200: - writel(12<<5, IR_WRITE_PHY_CONFIG); - writel(IR_SIR_MODE, IR_CONFIG_1); - break; - case 4000000: - writel(0xF, IR_WRITE_PHY_CONFIG); - writel(IR_FIR|IR_DMA_ENABLE|IR_RX_ENABLE, IR_CONFIG_1); - break; - default: - printk(KERN_ERR "%s unsupported speed %x\n", dev->name, speed); - ret = -EINVAL; - break; - } - - aup->speed = speed; - writel(read_ir_reg(IR_ENABLE) | 0x8000, IR_ENABLE); - au_sync(); - - control = read_ir_reg(IR_ENABLE); - writel(0, IR_RING_PROMPT); - au_sync(); - - if (control & (1<<14)) { - printk(KERN_ERR "%s: configuration error\n", dev->name); - } - else { - if (control & (1<<11)) - printk(KERN_DEBUG "%s Valid SIR config\n", dev->name); - if (control & (1<<12)) - printk(KERN_DEBUG "%s Valid MIR config\n", dev->name); - if (control & (1<<13)) - printk(KERN_DEBUG "%s Valid FIR config\n", dev->name); - if (control & (1<<10)) - printk(KERN_DEBUG "%s TX enabled\n", dev->name); - if (control & (1<<9)) - printk(KERN_DEBUG "%s RX enabled\n", dev->name); - } - - spin_unlock_irqrestore(&ir_lock, flags); - return ret; -} - -static int -au1k_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd) +static int au1k_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd) { struct if_irda_req *rq = (struct if_irda_req *)ifreq; struct au1k_private *aup = netdev_priv(dev); @@ -829,8 +752,218 @@ au1k_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd) return ret; } +static const struct net_device_ops au1k_irda_netdev_ops = { + .ndo_open = au1k_irda_start, + .ndo_stop = au1k_irda_stop, + .ndo_start_xmit = au1k_irda_hard_xmit, + .ndo_tx_timeout = au1k_tx_timeout, + .ndo_do_ioctl = au1k_irda_ioctl, +}; + +static int __devinit au1k_irda_net_init(struct net_device *dev) +{ + struct au1k_private *aup = netdev_priv(dev); + struct db_dest *pDB, *pDBfree; + int i, err, retval = 0; + dma_addr_t temp; + + err = au1k_irda_init_iobuf(&aup->rx_buff, 14384); + if (err) + goto out1; + + dev->netdev_ops = &au1k_irda_netdev_ops; + + irda_init_max_qos_capabilies(&aup->qos); + + /* The only value we must override it the baudrate */ + aup->qos.baud_rate.bits = IR_9600 | IR_19200 | IR_38400 | + IR_57600 | IR_115200 | IR_576000 | (IR_4000000 << 8); + + aup->qos.min_turn_time.bits = qos_mtt_bits; + irda_qos_bits_to_value(&aup->qos); + + retval = -ENOMEM; + + /* Tx ring follows rx ring + 512 bytes */ + /* we need a 1k aligned buffer */ + aup->rx_ring[0] = (struct ring_dest *) + dma_alloc(2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest)), + &temp); + if (!aup->rx_ring[0]) + goto out2; + + /* allocate the data buffers */ + aup->db[0].vaddr = + (void *)dma_alloc(MAX_BUF_SIZE * 2 * NUM_IR_DESC, &temp); + if (!aup->db[0].vaddr) + goto out3; + + setup_hw_rings(aup, (u32)aup->rx_ring[0], (u32)aup->rx_ring[0] + 512); + + pDBfree = NULL; + pDB = aup->db; + for (i = 0; i < (2 * NUM_IR_DESC); i++) { + pDB->pnext = pDBfree; + pDBfree = pDB; + pDB->vaddr = + (u32 *)((unsigned)aup->db[0].vaddr + (MAX_BUF_SIZE * i)); + pDB->dma_addr = (dma_addr_t)virt_to_bus(pDB->vaddr); + pDB++; + } + aup->pDBfree = pDBfree; + + /* attach a data buffer to each descriptor */ + for (i = 0; i < NUM_IR_DESC; i++) { + pDB = GetFreeDB(aup); + if (!pDB) + goto out3; + aup->rx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff); + aup->rx_ring[i]->addr_1 = (u8)((pDB->dma_addr >> 8) & 0xff); + aup->rx_ring[i]->addr_2 = (u8)((pDB->dma_addr >> 16) & 0xff); + aup->rx_ring[i]->addr_3 = (u8)((pDB->dma_addr >> 24) & 0xff); + aup->rx_db_inuse[i] = pDB; + } + for (i = 0; i < NUM_IR_DESC; i++) { + pDB = GetFreeDB(aup); + if (!pDB) + goto out3; + aup->tx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff); + aup->tx_ring[i]->addr_1 = (u8)((pDB->dma_addr >> 8) & 0xff); + aup->tx_ring[i]->addr_2 = (u8)((pDB->dma_addr >> 16) & 0xff); + aup->tx_ring[i]->addr_3 = (u8)((pDB->dma_addr >> 24) & 0xff); + aup->tx_ring[i]->count_0 = 0; + aup->tx_ring[i]->count_1 = 0; + aup->tx_ring[i]->flags = 0; + aup->tx_db_inuse[i] = pDB; + } + + return 0; + +out3: + dma_free((void *)aup->rx_ring[0], + 2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest))); +out2: + kfree(aup->rx_buff.head); +out1: + printk(KERN_ERR "au1k_irda_net_init() failed. Returns %d\n", retval); + return retval; +} + +static int __devinit au1k_irda_probe(struct platform_device *pdev) +{ + struct au1k_private *aup; + struct net_device *dev; + struct resource *r; + int err; + + dev = alloc_irdadev(sizeof(struct au1k_private)); + if (!dev) + return -ENOMEM; + + aup = netdev_priv(dev); + + aup->platdata = pdev->dev.platform_data; + + err = -EINVAL; + r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!r) + goto out; + + aup->irq_tx = r->start; + + r = platform_get_resource(pdev, IORESOURCE_IRQ, 1); + if (!r) + goto out; + + aup->irq_rx = r->start; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) + goto out; + + err = -EBUSY; + aup->ioarea = request_mem_region(r->start, r->end - r->start + 1, + pdev->name); + if (!aup->ioarea) + goto out; + + aup->iobase = ioremap_nocache(r->start, r->end - r->start + 1); + if (!aup->iobase) + goto out2; + + dev->irq = aup->irq_rx; + + err = au1k_irda_net_init(dev); + if (err) + goto out3; + err = register_netdev(dev); + if (err) + goto out4; + + platform_set_drvdata(pdev, dev); + + printk(KERN_INFO "IrDA: Registered device %s\n", dev->name); + return 0; + +out4: + dma_free((void *)aup->db[0].vaddr, + MAX_BUF_SIZE * 2 * NUM_IR_DESC); + dma_free((void *)aup->rx_ring[0], + 2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest))); + kfree(aup->rx_buff.head); +out3: + iounmap(aup->iobase); +out2: + release_resource(aup->ioarea); + kfree(aup->ioarea); +out: + free_netdev(dev); + return err; +} + +static int __devexit au1k_irda_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct au1k_private *aup = netdev_priv(dev); + + unregister_netdev(dev); + + dma_free((void *)aup->db[0].vaddr, + MAX_BUF_SIZE * 2 * NUM_IR_DESC); + dma_free((void *)aup->rx_ring[0], + 2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest))); + kfree(aup->rx_buff.head); + + iounmap(aup->iobase); + release_resource(aup->ioarea); + kfree(aup->ioarea); + + free_netdev(dev); + + return 0; +} + +static struct platform_driver au1k_irda_driver = { + .driver = { + .name = "au1000-irda", + .owner = THIS_MODULE, + }, + .probe = au1k_irda_probe, + .remove = __devexit_p(au1k_irda_remove), +}; + +static int __init au1k_irda_load(void) +{ + return platform_driver_register(&au1k_irda_driver); +} + +static void __exit au1k_irda_unload(void) +{ + return platform_driver_unregister(&au1k_irda_driver); +} + MODULE_AUTHOR("Pete Popov "); MODULE_DESCRIPTION("Au1000 IrDA Device Driver"); -module_init(au1k_irda_init); -module_exit(au1k_irda_exit); +module_init(au1k_irda_load); +module_exit(au1k_irda_unload); diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index 6e318ce41136..f9e3fb3a285b 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -155,18 +155,14 @@ config PCMCIA_M8XX This driver is also available as a module called m8xx_pcmcia. -config PCMCIA_AU1X00 - tristate "Au1x00 pcmcia support" - depends on MIPS_ALCHEMY && PCMCIA - config PCMCIA_ALCHEMY_DEVBOARD tristate "Alchemy Db/Pb1xxx PCMCIA socket services" depends on MIPS_ALCHEMY && PCMCIA select 64BIT_PHYS_ADDR help Enable this driver of you want PCMCIA support on your Alchemy - Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board. - NOT suitable for the PB1000! + Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300 + board. NOT suitable for the PB1000! This driver is also available as a module called db1xxx_ss.ko diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 29935ea921df..ec543a4ff2e4 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_PCMCIA_SA1100) += sa11xx_base.o sa1100_cs.o obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_base.o sa1111_cs.o obj-$(CONFIG_M32R_PCC) += m32r_pcc.o obj-$(CONFIG_M32R_CFC) += m32r_cfc.o -obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o obj-$(CONFIG_PCMCIA_BCM63XX) += bcm63xx_pcmcia.o obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o @@ -39,9 +38,6 @@ obj-$(CONFIG_AT91_CF) += at91_cf.o obj-$(CONFIG_ELECTRA_CF) += electra_cf.o obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD) += db1xxx_ss.o -au1x00_ss-y += au1000_generic.o -au1x00_ss-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o - sa1111_cs-y += sa1111_generic.o sa1111_cs-$(CONFIG_ASSABET_NEPONSET) += sa1100_neponset.o sa1111_cs-$(CONFIG_SA1100_BADGE4) += sa1100_badge4.o diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c deleted file mode 100644 index 95dd7c62741f..000000000000 --- a/drivers/pcmcia/au1000_generic.c +++ /dev/null @@ -1,545 +0,0 @@ -/* - * - * Alchemy Semi Au1000 pcmcia driver - * - * Copyright 2001-2003 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@embeddedalley.com or source@mvista.com - * - * Copyright 2004 Pete Popov, Embedded Alley Solutions, Inc. - * Updated the driver to 2.6. Followed the sa11xx API and largely - * copied many of the hardware independent functions. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include "au1000_generic.h" - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Pete Popov "); -MODULE_DESCRIPTION("Linux PCMCIA Card Services: Au1x00 Socket Controller"); - -#if 0 -#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args) -#else -#define debug(x,args...) -#endif - -#define MAP_SIZE 0x100000 -extern struct au1000_pcmcia_socket au1000_pcmcia_socket[]; -#define PCMCIA_SOCKET(x) (au1000_pcmcia_socket + (x)) -#define to_au1000_socket(x) container_of(x, struct au1000_pcmcia_socket, socket) - -/* Some boards like to support CF cards as IDE root devices, so they - * grab pcmcia sockets directly. - */ -u32 *pcmcia_base_vaddrs[2]; -extern const unsigned long mips_io_port_base; - -static DEFINE_MUTEX(pcmcia_sockets_lock); - -static int (*au1x00_pcmcia_hw_init[])(struct device *dev) = { - au1x_board_init, -}; - -static int -au1x00_pcmcia_skt_state(struct au1000_pcmcia_socket *skt) -{ - struct pcmcia_state state; - unsigned int stat; - - memset(&state, 0, sizeof(struct pcmcia_state)); - - skt->ops->socket_state(skt, &state); - - stat = state.detect ? SS_DETECT : 0; - stat |= state.ready ? SS_READY : 0; - stat |= state.wrprot ? SS_WRPROT : 0; - stat |= state.vs_3v ? SS_3VCARD : 0; - stat |= state.vs_Xv ? SS_XVCARD : 0; - stat |= skt->cs_state.Vcc ? SS_POWERON : 0; - - if (skt->cs_state.flags & SS_IOCARD) - stat |= state.bvd1 ? SS_STSCHG : 0; - else { - if (state.bvd1 == 0) - stat |= SS_BATDEAD; - else if (state.bvd2 == 0) - stat |= SS_BATWARN; - } - return stat; -} - -/* - * au100_pcmcia_config_skt - * - * Convert PCMCIA socket state to our socket configure structure. - */ -static int -au1x00_pcmcia_config_skt(struct au1000_pcmcia_socket *skt, socket_state_t *state) -{ - int ret; - - ret = skt->ops->configure_socket(skt, state); - if (ret == 0) { - skt->cs_state = *state; - } - - if (ret < 0) - debug("unable to configure socket %d\n", skt->nr); - - return ret; -} - -/* au1x00_pcmcia_sock_init() - * - * (Re-)Initialise the socket, turning on status interrupts - * and PCMCIA bus. This must wait for power to stabilise - * so that the card status signals report correctly. - * - * Returns: 0 - */ -static int au1x00_pcmcia_sock_init(struct pcmcia_socket *sock) -{ - struct au1000_pcmcia_socket *skt = to_au1000_socket(sock); - - debug("initializing socket %u\n", skt->nr); - - skt->ops->socket_init(skt); - return 0; -} - -/* - * au1x00_pcmcia_suspend() - * - * Remove power on the socket, disable IRQs from the card. - * Turn off status interrupts, and disable the PCMCIA bus. - * - * Returns: 0 - */ -static int au1x00_pcmcia_suspend(struct pcmcia_socket *sock) -{ - struct au1000_pcmcia_socket *skt = to_au1000_socket(sock); - - debug("suspending socket %u\n", skt->nr); - - skt->ops->socket_suspend(skt); - - return 0; -} - -static DEFINE_SPINLOCK(status_lock); - -/* - * au1x00_check_status() - */ -static void au1x00_check_status(struct au1000_pcmcia_socket *skt) -{ - unsigned int events; - - debug("entering PCMCIA monitoring thread\n"); - - do { - unsigned int status; - unsigned long flags; - - status = au1x00_pcmcia_skt_state(skt); - - spin_lock_irqsave(&status_lock, flags); - events = (status ^ skt->status) & skt->cs_state.csc_mask; - skt->status = status; - spin_unlock_irqrestore(&status_lock, flags); - - debug("events: %s%s%s%s%s%s\n", - events == 0 ? "" : "", - events & SS_DETECT ? "DETECT " : "", - events & SS_READY ? "READY " : "", - events & SS_BATDEAD ? "BATDEAD " : "", - events & SS_BATWARN ? "BATWARN " : "", - events & SS_STSCHG ? "STSCHG " : ""); - - if (events) - pcmcia_parse_events(&skt->socket, events); - } while (events); -} - -/* - * au1x00_pcmcia_poll_event() - * Let's poll for events in addition to IRQs since IRQ only is unreliable... - */ -static void au1x00_pcmcia_poll_event(unsigned long dummy) -{ - struct au1000_pcmcia_socket *skt = (struct au1000_pcmcia_socket *)dummy; - debug("polling for events\n"); - - mod_timer(&skt->poll_timer, jiffies + AU1000_PCMCIA_POLL_PERIOD); - - au1x00_check_status(skt); -} - -/* au1x00_pcmcia_get_status() - * - * From the sa11xx_core.c: - * Implements the get_status() operation for the in-kernel PCMCIA - * service (formerly SS_GetStatus in Card Services). Essentially just - * fills in bits in `status' according to internal driver state or - * the value of the voltage detect chipselect register. - * - * As a debugging note, during card startup, the PCMCIA core issues - * three set_socket() commands in a row the first with RESET deasserted, - * the second with RESET asserted, and the last with RESET deasserted - * again. Following the third set_socket(), a get_status() command will - * be issued. The kernel is looking for the SS_READY flag (see - * setup_socket(), reset_socket(), and unreset_socket() in cs.c). - * - * Returns: 0 - */ -static int -au1x00_pcmcia_get_status(struct pcmcia_socket *sock, unsigned int *status) -{ - struct au1000_pcmcia_socket *skt = to_au1000_socket(sock); - - skt->status = au1x00_pcmcia_skt_state(skt); - *status = skt->status; - - return 0; -} - -/* au1x00_pcmcia_set_socket() - * Implements the set_socket() operation for the in-kernel PCMCIA - * service (formerly SS_SetSocket in Card Services). We more or - * less punt all of this work and let the kernel handle the details - * of power configuration, reset, &c. We also record the value of - * `state' in order to regurgitate it to the PCMCIA core later. - * - * Returns: 0 - */ -static int -au1x00_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state) -{ - struct au1000_pcmcia_socket *skt = to_au1000_socket(sock); - - debug("for sock %u\n", skt->nr); - - debug("\tmask: %s%s%s%s%s%s\n\tflags: %s%s%s%s%s%s\n", - (state->csc_mask==0)?"":"", - (state->csc_mask&SS_DETECT)?"DETECT ":"", - (state->csc_mask&SS_READY)?"READY ":"", - (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"", - (state->csc_mask&SS_BATWARN)?"BATWARN ":"", - (state->csc_mask&SS_STSCHG)?"STSCHG ":"", - (state->flags==0)?"":"", - (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"", - (state->flags&SS_IOCARD)?"IOCARD ":"", - (state->flags&SS_RESET)?"RESET ":"", - (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"", - (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":""); - debug("\tVcc %d Vpp %d irq %d\n", - state->Vcc, state->Vpp, state->io_irq); - - return au1x00_pcmcia_config_skt(skt, state); -} - -int -au1x00_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *map) -{ - struct au1000_pcmcia_socket *skt = to_au1000_socket(sock); - unsigned int speed; - - if(map->map>=MAX_IO_WIN){ - debug("map (%d) out of range\n", map->map); - return -1; - } - - if(map->flags&MAP_ACTIVE){ - speed=(map->speed>0)?map->speed:AU1000_PCMCIA_IO_SPEED; - skt->spd_io[map->map] = speed; - } - - map->start=(unsigned int)(u32)skt->virt_io; - map->stop=map->start+MAP_SIZE; - return 0; - -} /* au1x00_pcmcia_set_io_map() */ - - -static int -au1x00_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map) -{ - struct au1000_pcmcia_socket *skt = to_au1000_socket(sock); - unsigned short speed = map->speed; - - if(map->map>=MAX_WIN){ - debug("map (%d) out of range\n", map->map); - return -1; - } - - if (map->flags & MAP_ATTRIB) { - skt->spd_attr[map->map] = speed; - skt->spd_mem[map->map] = 0; - } else { - skt->spd_attr[map->map] = 0; - skt->spd_mem[map->map] = speed; - } - - if (map->flags & MAP_ATTRIB) { - map->static_start = skt->phys_attr + map->card_start; - } - else { - map->static_start = skt->phys_mem + map->card_start; - } - - debug("set_mem_map %d start %08lx card_start %08x\n", - map->map, map->static_start, map->card_start); - return 0; - -} /* au1x00_pcmcia_set_mem_map() */ - -static struct pccard_operations au1x00_pcmcia_operations = { - .init = au1x00_pcmcia_sock_init, - .suspend = au1x00_pcmcia_suspend, - .get_status = au1x00_pcmcia_get_status, - .set_socket = au1x00_pcmcia_set_socket, - .set_io_map = au1x00_pcmcia_set_io_map, - .set_mem_map = au1x00_pcmcia_set_mem_map, -}; - -static const char *skt_names[] = { - "PCMCIA socket 0", - "PCMCIA socket 1", -}; - -struct skt_dev_info { - int nskt; -}; - -int au1x00_pcmcia_socket_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr) -{ - struct skt_dev_info *sinfo; - struct au1000_pcmcia_socket *skt; - int ret, i; - - sinfo = kzalloc(sizeof(struct skt_dev_info), GFP_KERNEL); - if (!sinfo) { - ret = -ENOMEM; - goto out; - } - - sinfo->nskt = nr; - - /* - * Initialise the per-socket structure. - */ - for (i = 0; i < nr; i++) { - skt = PCMCIA_SOCKET(i); - memset(skt, 0, sizeof(*skt)); - - skt->socket.resource_ops = &pccard_static_ops; - skt->socket.ops = &au1x00_pcmcia_operations; - skt->socket.owner = ops->owner; - skt->socket.dev.parent = dev; - - init_timer(&skt->poll_timer); - skt->poll_timer.function = au1x00_pcmcia_poll_event; - skt->poll_timer.data = (unsigned long)skt; - skt->poll_timer.expires = jiffies + AU1000_PCMCIA_POLL_PERIOD; - - skt->nr = first + i; - skt->irq = 255; - skt->dev = dev; - skt->ops = ops; - - skt->res_skt.name = skt_names[skt->nr]; - skt->res_io.name = "io"; - skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY; - skt->res_mem.name = "memory"; - skt->res_mem.flags = IORESOURCE_MEM; - skt->res_attr.name = "attribute"; - skt->res_attr.flags = IORESOURCE_MEM; - - /* - * PCMCIA client drivers use the inb/outb macros to access the - * IO registers. Since mips_io_port_base is added to the - * access address of the mips implementation of inb/outb, - * we need to subtract it here because we want to access the - * I/O or MEM address directly, without going through this - * "mips_io_port_base" mechanism. - */ - if (i == 0) { - skt->virt_io = (void *) - (ioremap((phys_t)AU1X_SOCK0_IO, 0x1000) - - (u32)mips_io_port_base); - skt->phys_attr = AU1X_SOCK0_PHYS_ATTR; - skt->phys_mem = AU1X_SOCK0_PHYS_MEM; - } - else { - skt->virt_io = (void *) - (ioremap((phys_t)AU1X_SOCK1_IO, 0x1000) - - (u32)mips_io_port_base); - skt->phys_attr = AU1X_SOCK1_PHYS_ATTR; - skt->phys_mem = AU1X_SOCK1_PHYS_MEM; - } - pcmcia_base_vaddrs[i] = (u32 *)skt->virt_io; - ret = ops->hw_init(skt); - - skt->socket.features = SS_CAP_STATIC_MAP|SS_CAP_PCCARD; - skt->socket.irq_mask = 0; - skt->socket.map_size = MAP_SIZE; - skt->socket.pci_irq = skt->irq; - skt->socket.io_offset = (unsigned long)skt->virt_io; - - skt->status = au1x00_pcmcia_skt_state(skt); - - ret = pcmcia_register_socket(&skt->socket); - if (ret) - goto out_err; - - WARN_ON(skt->socket.sock != i); - - add_timer(&skt->poll_timer); - } - - dev_set_drvdata(dev, sinfo); - return 0; - - -out_err: - ops->hw_shutdown(skt); - while (i-- > 0) { - skt = PCMCIA_SOCKET(i); - - del_timer_sync(&skt->poll_timer); - pcmcia_unregister_socket(&skt->socket); - if (i == 0) { - iounmap(skt->virt_io + (u32)mips_io_port_base); - skt->virt_io = NULL; - } -#ifndef CONFIG_MIPS_XXS1500 - else { - iounmap(skt->virt_io + (u32)mips_io_port_base); - skt->virt_io = NULL; - } -#endif - ops->hw_shutdown(skt); - - } - kfree(sinfo); -out: - return ret; -} - -int au1x00_drv_pcmcia_remove(struct platform_device *dev) -{ - struct skt_dev_info *sinfo = platform_get_drvdata(dev); - int i; - - mutex_lock(&pcmcia_sockets_lock); - platform_set_drvdata(dev, NULL); - - for (i = 0; i < sinfo->nskt; i++) { - struct au1000_pcmcia_socket *skt = PCMCIA_SOCKET(i); - - del_timer_sync(&skt->poll_timer); - pcmcia_unregister_socket(&skt->socket); - skt->ops->hw_shutdown(skt); - au1x00_pcmcia_config_skt(skt, &dead_socket); - iounmap(skt->virt_io + (u32)mips_io_port_base); - skt->virt_io = NULL; - } - - kfree(sinfo); - mutex_unlock(&pcmcia_sockets_lock); - return 0; -} - - -/* - * PCMCIA "Driver" API - */ - -static int au1x00_drv_pcmcia_probe(struct platform_device *dev) -{ - int i, ret = -ENODEV; - - mutex_lock(&pcmcia_sockets_lock); - for (i=0; i < ARRAY_SIZE(au1x00_pcmcia_hw_init); i++) { - ret = au1x00_pcmcia_hw_init[i](&dev->dev); - if (ret == 0) - break; - } - mutex_unlock(&pcmcia_sockets_lock); - return ret; -} - -static struct platform_driver au1x00_pcmcia_driver = { - .driver = { - .name = "au1x00-pcmcia", - .owner = THIS_MODULE, - }, - .probe = au1x00_drv_pcmcia_probe, - .remove = au1x00_drv_pcmcia_remove, -}; - - -/* au1x00_pcmcia_init() - * - * This routine performs low-level PCMCIA initialization and then - * registers this socket driver with Card Services. - * - * Returns: 0 on success, -ve error code on failure - */ -static int __init au1x00_pcmcia_init(void) -{ - int error = 0; - error = platform_driver_register(&au1x00_pcmcia_driver); - return error; -} - -/* au1x00_pcmcia_exit() - * Invokes the low-level kernel service to free IRQs associated with this - * socket controller and reset GPIO edge detection. - */ -static void __exit au1x00_pcmcia_exit(void) -{ - platform_driver_unregister(&au1x00_pcmcia_driver); -} - -module_init(au1x00_pcmcia_init); -module_exit(au1x00_pcmcia_exit); diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h deleted file mode 100644 index 5c36bda2963b..000000000000 --- a/drivers/pcmcia/au1000_generic.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Alchemy Semi Au1000 pcmcia driver include file - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#ifndef __ASM_AU1000_PCMCIA_H -#define __ASM_AU1000_PCMCIA_H - -/* include the world */ - -#include -#include -#include "cs_internal.h" - -#define AU1000_PCMCIA_POLL_PERIOD (2*HZ) -#define AU1000_PCMCIA_IO_SPEED (255) -#define AU1000_PCMCIA_MEM_SPEED (300) - -#define AU1X_SOCK0_IO 0xF00000000ULL -#define AU1X_SOCK0_PHYS_ATTR 0xF40000000ULL -#define AU1X_SOCK0_PHYS_MEM 0xF80000000ULL - -/* pcmcia socket 1 needs external glue logic so the memory map - * differs from board to board. - */ -#if defined(CONFIG_MIPS_PB1000) -#define AU1X_SOCK1_IO 0xF08000000ULL -#define AU1X_SOCK1_PHYS_ATTR 0xF48000000ULL -#define AU1X_SOCK1_PHYS_MEM 0xF88000000ULL -#endif - -struct pcmcia_state { - unsigned detect: 1, - ready: 1, - wrprot: 1, - bvd1: 1, - bvd2: 1, - vs_3v: 1, - vs_Xv: 1; -}; - -struct pcmcia_configure { - unsigned sock: 8, - vcc: 8, - vpp: 8, - output: 1, - speaker: 1, - reset: 1; -}; - -struct pcmcia_irqs { - int sock; - int irq; - const char *str; -}; - - -struct au1000_pcmcia_socket { - struct pcmcia_socket socket; - - /* - * Info from low level handler - */ - struct device *dev; - unsigned int nr; - unsigned int irq; - - /* - * Core PCMCIA state - */ - struct pcmcia_low_level *ops; - - unsigned int status; - socket_state_t cs_state; - - unsigned short spd_io[MAX_IO_WIN]; - unsigned short spd_mem[MAX_WIN]; - unsigned short spd_attr[MAX_WIN]; - - struct resource res_skt; - struct resource res_io; - struct resource res_mem; - struct resource res_attr; - - void * virt_io; - unsigned int phys_io; - unsigned int phys_attr; - unsigned int phys_mem; - unsigned short speed_io, speed_attr, speed_mem; - - unsigned int irq_state; - - struct timer_list poll_timer; -}; - -struct pcmcia_low_level { - struct module *owner; - - int (*hw_init)(struct au1000_pcmcia_socket *); - void (*hw_shutdown)(struct au1000_pcmcia_socket *); - - void (*socket_state)(struct au1000_pcmcia_socket *, struct pcmcia_state *); - int (*configure_socket)(struct au1000_pcmcia_socket *, struct socket_state_t *); - - /* - * Enable card status IRQs on (re-)initialisation. This can - * be called at initialisation, power management event, or - * pcmcia event. - */ - void (*socket_init)(struct au1000_pcmcia_socket *); - - /* - * Disable card status IRQs and PCMCIA bus on suspend. - */ - void (*socket_suspend)(struct au1000_pcmcia_socket *); -}; - -extern int au1x_board_init(struct device *dev); - -#endif /* __ASM_AU1000_PCMCIA_H */ diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c deleted file mode 100644 index b2396647a165..000000000000 --- a/drivers/pcmcia/au1000_pb1x00.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * - * Alchemy Semi Pb1000 boards specific pcmcia routines. - * - * Copyright 2002 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include -#include - -#define debug(fmt, arg...) do { } while (0) - -#include -#define PCMCIA_IRQ AU1000_GPIO_15 - -static int pb1x00_pcmcia_init(struct pcmcia_init *init) -{ - u16 pcr; - pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST; - - au_writel(0x8000, PB1000_MDR); /* clear pcmcia interrupt */ - au_sync_delay(100); - au_writel(0x4000, PB1000_MDR); /* enable pcmcia interrupt */ - au_sync(); - - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0); - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1); - au_writel(pcr, PB1000_PCR); - au_sync_delay(20); - - return PCMCIA_NUM_SOCKS; -} - -static int pb1x00_pcmcia_shutdown(void) -{ - u16 pcr; - pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST; - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0); - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1); - au_writel(pcr, PB1000_PCR); - au_sync_delay(20); - return 0; -} - -static int -pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state) -{ - u32 inserted0, inserted1; - u16 vs0, vs1; - - vs0 = vs1 = (u16)au_readl(PB1000_ACR1); - inserted0 = !(vs0 & (ACR1_SLOT_0_CD1 | ACR1_SLOT_0_CD2)); - inserted1 = !(vs1 & (ACR1_SLOT_1_CD1 | ACR1_SLOT_1_CD2)); - vs0 = (vs0 >> 4) & 0x3; - vs1 = (vs1 >> 12) & 0x3; - - state->ready = 0; - state->vs_Xv = 0; - state->vs_3v = 0; - state->detect = 0; - - if (sock == 0) { - if (inserted0) { - switch (vs0) { - case 0: - case 2: - state->vs_3v=1; - break; - case 3: /* 5V */ - break; - default: - /* return without setting 'detect' */ - printk(KERN_ERR "pb1x00 bad VS (%d)\n", - vs0); - return 0; - } - state->detect = 1; - } - } - else { - if (inserted1) { - switch (vs1) { - case 0: - case 2: - state->vs_3v=1; - break; - case 3: /* 5V */ - break; - default: - /* return without setting 'detect' */ - printk(KERN_ERR "pb1x00 bad VS (%d)\n", - vs1); - return 0; - } - state->detect = 1; - } - } - - if (state->detect) { - state->ready = 1; - } - - state->bvd1=1; - state->bvd2=1; - state->wrprot=0; - return 1; -} - - -static int pb1x00_pcmcia_get_irq_info(struct pcmcia_irq_info *info) -{ - - if(info->sock > PCMCIA_MAX_SOCK) return -1; - - /* - * Even in the case of the Pb1000, both sockets are connected - * to the same irq line. - */ - info->irq = PCMCIA_IRQ; - - return 0; -} - - -static int -pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure) -{ - u16 pcr; - - if(configure->sock > PCMCIA_MAX_SOCK) return -1; - - pcr = au_readl(PB1000_PCR); - - if (configure->sock == 0) { - pcr &= ~(PCR_SLOT_0_VCC0 | PCR_SLOT_0_VCC1 | - PCR_SLOT_0_VPP0 | PCR_SLOT_0_VPP1); - } - else { - pcr &= ~(PCR_SLOT_1_VCC0 | PCR_SLOT_1_VCC1 | - PCR_SLOT_1_VPP0 | PCR_SLOT_1_VPP1); - } - - pcr &= ~PCR_SLOT_0_RST; - debug("Vcc %dV Vpp %dV, pcr %x\n", - configure->vcc, configure->vpp, pcr); - switch(configure->vcc){ - case 0: /* Vcc 0 */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_GND, - configure->sock); - break; - case 12: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_12V, - configure->sock); - break; - case 50: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_5V, - configure->sock); - break; - case 33: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_3V, - configure->sock); - break; - default: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ, - configure->sock); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - configure->vcc, - configure->vpp); - break; - } - break; - case 50: /* Vcc 5V */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(VCC_5V,VPP_GND, - configure->sock); - break; - case 50: - pcr |= SET_VCC_VPP(VCC_5V,VPP_5V, - configure->sock); - break; - case 12: - pcr |= SET_VCC_VPP(VCC_5V,VPP_12V, - configure->sock); - break; - case 33: - pcr |= SET_VCC_VPP(VCC_5V,VPP_3V, - configure->sock); - break; - default: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ, - configure->sock); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - configure->vcc, - configure->vpp); - break; - } - break; - case 33: /* Vcc 3.3V */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(VCC_3V,VPP_GND, - configure->sock); - break; - case 50: - pcr |= SET_VCC_VPP(VCC_3V,VPP_5V, - configure->sock); - break; - case 12: - pcr |= SET_VCC_VPP(VCC_3V,VPP_12V, - configure->sock); - break; - case 33: - pcr |= SET_VCC_VPP(VCC_3V,VPP_3V, - configure->sock); - break; - default: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ, - configure->sock); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - configure->vcc, - configure->vpp); - break; - } - break; - default: /* what's this ? */ - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,configure->sock); - printk(KERN_ERR "%s: bad Vcc %d\n", - __func__, configure->vcc); - break; - } - - if (configure->sock == 0) { - pcr &= ~(PCR_SLOT_0_RST); - if (configure->reset) - pcr |= PCR_SLOT_0_RST; - } - else { - pcr &= ~(PCR_SLOT_1_RST); - if (configure->reset) - pcr |= PCR_SLOT_1_RST; - } - au_writel(pcr, PB1000_PCR); - au_sync_delay(300); - - return 0; -} - - -struct pcmcia_low_level pb1x00_pcmcia_ops = { - pb1x00_pcmcia_init, - pb1x00_pcmcia_shutdown, - pb1x00_pcmcia_socket_state, - pb1x00_pcmcia_get_irq_info, - pb1x00_pcmcia_configure_socket -}; diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c index 3e49df6d5e3b..5b7c22784aff 100644 --- a/drivers/pcmcia/db1xxx_ss.c +++ b/drivers/pcmcia/db1xxx_ss.c @@ -7,7 +7,7 @@ /* This is a fairly generic PCMCIA socket driver suitable for the * following Alchemy Development boards: - * Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200. + * Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200, Db1300 * * The Db1000 is used as a reference: Per-socket card-, carddetect- and * statuschange IRQs connected to SoC GPIOs, control and status register @@ -18,6 +18,7 @@ * - Pb1100/Pb1500: single socket only; voltage key bits VS are * at STATUS[5:4] (instead of STATUS[1:0]). * - Au1200-based: additional card-eject irqs, irqs not gpios! + * - Db1300: Db1200-like, no pwr ctrl, single socket (#1). */ #include @@ -59,11 +60,17 @@ struct db1x_pcmcia_sock { #define BOARD_TYPE_DEFAULT 0 /* most boards */ #define BOARD_TYPE_DB1200 1 /* IRQs aren't gpios */ #define BOARD_TYPE_PB1100 2 /* VS bits slightly different */ +#define BOARD_TYPE_DB1300 3 /* no power control */ int board_type; }; #define to_db1x_socket(x) container_of(x, struct db1x_pcmcia_sock, socket) +static int db1300_card_inserted(struct db1x_pcmcia_sock *sock) +{ + return bcsr_read(BCSR_SIGSTAT) & (1 << 8); +} + /* DB/PB1200: check CPLD SIGSTATUS register bit 10/12 */ static int db1200_card_inserted(struct db1x_pcmcia_sock *sock) { @@ -84,6 +91,8 @@ static int db1x_card_inserted(struct db1x_pcmcia_sock *sock) switch (sock->board_type) { case BOARD_TYPE_DB1200: return db1200_card_inserted(sock); + case BOARD_TYPE_DB1300: + return db1300_card_inserted(sock); default: return db1000_card_inserted(sock); } @@ -160,7 +169,8 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) * ejection handler have been registered and the currently * active one disabled. */ - if (sock->board_type == BOARD_TYPE_DB1200) { + if ((sock->board_type == BOARD_TYPE_DB1200) || + (sock->board_type == BOARD_TYPE_DB1300)) { ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq, IRQF_DISABLED, "pcmcia_insert", sock); if (ret) @@ -174,7 +184,7 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) } /* enable the currently silent one */ - if (db1200_card_inserted(sock)) + if (db1x_card_inserted(sock)) enable_irq(sock->eject_irq); else enable_irq(sock->insert_irq); @@ -270,7 +280,8 @@ static int db1x_pcmcia_configure(struct pcmcia_socket *skt, } /* create new voltage code */ - cr_set |= ((v << 2) | p) << (sock->nr * 8); + if (sock->board_type != BOARD_TYPE_DB1300) + cr_set |= ((v << 2) | p) << (sock->nr * 8); changed = state->flags ^ sock->old_flags; @@ -343,6 +354,10 @@ static int db1x_pcmcia_get_status(struct pcmcia_socket *skt, /* if Vcc is not zero, we have applied power to a card */ status |= GET_VCC(cr, sock->nr) ? SS_POWERON : 0; + /* DB1300: power always on, but don't tell when no card present */ + if ((sock->board_type == BOARD_TYPE_DB1300) && (status & SS_DETECT)) + status = SS_POWERON | SS_3VCARD | SS_DETECT; + /* reset de-asserted? then we're ready */ status |= (GET_RESET(cr, sock->nr)) ? SS_READY : SS_RESET; @@ -419,6 +434,9 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev) case BCSR_WHOAMI_PB1200 ... BCSR_WHOAMI_DB1200: sock->board_type = BOARD_TYPE_DB1200; break; + case BCSR_WHOAMI_DB1300: + sock->board_type = BOARD_TYPE_DB1300; + break; default: printk(KERN_INFO "db1xxx-ss: unknown board %d!\n", bid); ret = -ENODEV; diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index a1fd73df5416..369e092bf3d5 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -87,12 +87,12 @@ config SPI_BFIN_SPORT Enable support for a SPI bus via the Blackfin SPORT peripheral. config SPI_AU1550 - tristate "Au1550/Au12x0 SPI Controller" + tristate "Au1550/Au1200/Au1300 SPI Controller" depends on MIPS_ALCHEMY && EXPERIMENTAL select SPI_BITBANG help If you say yes to this option, support will be included for the - Au1550 SPI controller (may also work with Au1200,Au1210,Au1250). + PSC SPI controller found on Au1550, Au1200 and Au1300 series. config SPI_BITBANG tristate "Utilities for Bitbanging SPI masters" diff --git a/drivers/usb/host/alchemy-common.c b/drivers/usb/host/alchemy-common.c index b4192c964d0d..936af8359fb2 100644 --- a/drivers/usb/host/alchemy-common.c +++ b/drivers/usb/host/alchemy-common.c @@ -52,9 +52,263 @@ USBCFG_EBE | USBCFG_EME | USBCFG_OBE | \ USBCFG_OME) +/* Au1300 USB config registers */ +#define USB_DWC_CTRL1 0x00 +#define USB_DWC_CTRL2 0x04 +#define USB_VBUS_TIMER 0x10 +#define USB_SBUS_CTRL 0x14 +#define USB_MSR_ERR 0x18 +#define USB_DWC_CTRL3 0x1C +#define USB_DWC_CTRL4 0x20 +#define USB_OTG_STATUS 0x28 +#define USB_DWC_CTRL5 0x2C +#define USB_DWC_CTRL6 0x30 +#define USB_DWC_CTRL7 0x34 +#define USB_PHY_STATUS 0xC0 +#define USB_INT_STATUS 0xC4 +#define USB_INT_ENABLE 0xC8 + +#define USB_DWC_CTRL1_OTGD 0x04 /* set to DISable OTG */ +#define USB_DWC_CTRL1_HSTRS 0x02 /* set to ENable EHCI */ +#define USB_DWC_CTRL1_DCRS 0x01 /* set to ENable UDC */ + +#define USB_DWC_CTRL2_PHY1RS 0x04 /* set to enable PHY1 */ +#define USB_DWC_CTRL2_PHY0RS 0x02 /* set to enable PHY0 */ +#define USB_DWC_CTRL2_PHYRS 0x01 /* set to enable PHY */ + +#define USB_DWC_CTRL3_OHCI1_CKEN (1 << 19) +#define USB_DWC_CTRL3_OHCI0_CKEN (1 << 18) +#define USB_DWC_CTRL3_EHCI0_CKEN (1 << 17) +#define USB_DWC_CTRL3_OTG0_CKEN (1 << 16) + +#define USB_SBUS_CTRL_SBCA 0x04 /* coherent access */ + +#define USB_INTEN_FORCE 0x20 +#define USB_INTEN_PHY 0x10 +#define USB_INTEN_UDC 0x08 +#define USB_INTEN_EHCI 0x04 +#define USB_INTEN_OHCI1 0x02 +#define USB_INTEN_OHCI0 0x01 static DEFINE_SPINLOCK(alchemy_usb_lock); +static inline void __au1300_usb_phyctl(void __iomem *base, int enable) +{ + unsigned long r, s; + + r = __raw_readl(base + USB_DWC_CTRL2); + s = __raw_readl(base + USB_DWC_CTRL3); + + s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN | + USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN; + + if (enable) { + /* simply enable all PHYs */ + r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS | + USB_DWC_CTRL2_PHYRS; + __raw_writel(r, base + USB_DWC_CTRL2); + wmb(); + } else if (!s) { + /* no USB block active, do disable all PHYs */ + r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS | + USB_DWC_CTRL2_PHYRS); + __raw_writel(r, base + USB_DWC_CTRL2); + wmb(); + } +} + +static inline void __au1300_ohci_control(void __iomem *base, int enable, int id) +{ + unsigned long r; + + if (enable) { + __raw_writel(1, base + USB_DWC_CTRL7); /* start OHCI clock */ + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); /* enable OHCI block */ + r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN + : USB_DWC_CTRL3_OHCI1_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); /* power up the PHYs */ + + r = __raw_readl(base + USB_INT_ENABLE); + r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + /* reset the OHCI start clock bit */ + __raw_writel(0, base + USB_DWC_CTRL7); + wmb(); + } else { + r = __raw_readl(base + USB_INT_ENABLE); + r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1); + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); + r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN + : USB_DWC_CTRL3_OHCI1_CKEN); + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline void __au1300_ehci_control(void __iomem *base, int enable) +{ + unsigned long r; + + if (enable) { + r = __raw_readl(base + USB_DWC_CTRL3); + r |= USB_DWC_CTRL3_EHCI0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r |= USB_DWC_CTRL1_HSTRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + + r = __raw_readl(base + USB_INT_ENABLE); + r |= USB_INTEN_EHCI; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + } else { + r = __raw_readl(base + USB_INT_ENABLE); + r &= ~USB_INTEN_EHCI; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r &= ~USB_DWC_CTRL1_HSTRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); + r &= ~USB_DWC_CTRL3_EHCI0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline void __au1300_udc_control(void __iomem *base, int enable) +{ + unsigned long r; + + if (enable) { + r = __raw_readl(base + USB_DWC_CTRL1); + r |= USB_DWC_CTRL1_DCRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + + r = __raw_readl(base + USB_INT_ENABLE); + r |= USB_INTEN_UDC; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + } else { + r = __raw_readl(base + USB_INT_ENABLE); + r &= ~USB_INTEN_UDC; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r &= ~USB_DWC_CTRL1_DCRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline void __au1300_otg_control(void __iomem *base, int enable) +{ + unsigned long r; + if (enable) { + r = __raw_readl(base + USB_DWC_CTRL3); + r |= USB_DWC_CTRL3_OTG0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r &= ~USB_DWC_CTRL1_OTGD; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + } else { + r = __raw_readl(base + USB_DWC_CTRL1); + r |= USB_DWC_CTRL1_OTGD; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); + r &= ~USB_DWC_CTRL3_OTG0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline int au1300_usb_control(int block, int enable) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); + int ret = 0; + + switch (block) { + case ALCHEMY_USB_OHCI0: + __au1300_ohci_control(base, enable, 0); + break; + case ALCHEMY_USB_OHCI1: + __au1300_ohci_control(base, enable, 1); + break; + case ALCHEMY_USB_EHCI0: + __au1300_ehci_control(base, enable); + break; + case ALCHEMY_USB_UDC0: + __au1300_udc_control(base, enable); + break; + case ALCHEMY_USB_OTG0: + __au1300_otg_control(base, enable); + break; + default: + ret = -ENODEV; + } + return ret; +} + +static inline void au1300_usb_init(void) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); + + /* set some sane defaults. Note: we don't fiddle with DWC_CTRL4 + * here at all: Port 2 routing (EHCI or UDC) must be set either + * by boot firmware or platform init code; I can't autodetect + * a sane setting. + */ + __raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */ + wmb(); + __raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */ + wmb(); + __raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */ + wmb(); + __raw_writel(~0, base + USB_INT_STATUS); /* clear int status */ + wmb(); + /* set coherent access bit */ + __raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL); + wmb(); +} static inline void __au1200_ohci_control(void __iomem *base, int enable) { @@ -233,6 +487,9 @@ int alchemy_usb_control(int block, int enable) case ALCHEMY_CPU_AU1200: ret = au1200_usb_control(block, enable); break; + case ALCHEMY_CPU_AU1300: + ret = au1300_usb_control(block, enable); + break; default: ret = -ENODEV; } @@ -281,6 +538,20 @@ static void au1200_usb_pm(int susp) } } +static void au1300_usb_pm(int susp) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); + /* remember Port2 routing */ + if (susp) { + alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4); + } else { + au1300_usb_init(); + __raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4); + wmb(); + } +} + static void alchemy_usb_pm(int susp) { switch (alchemy_get_cputype()) { @@ -295,6 +566,9 @@ static void alchemy_usb_pm(int susp) case ALCHEMY_CPU_AU1200: au1200_usb_pm(susp); break; + case ALCHEMY_CPU_AU1300: + au1300_usb_pm(susp); + break; } } @@ -328,6 +602,9 @@ static int __init alchemy_usb_init(void) case ALCHEMY_CPU_AU1200: au1200_usb_init(); break; + case ALCHEMY_CPU_AU1300: + au1300_usb_init(); + break; } register_syscore_ops(&alchemy_usb_pm_ops); diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 9b66df8278f3..95d1a71dccad 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -89,7 +89,7 @@ static const struct hc_driver ohci_au1xxx_hc_driver = { static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) { - int ret; + int ret, unit; struct usb_hcd *hcd; if (usb_disabled()) @@ -120,7 +120,9 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) goto err2; } - if (alchemy_usb_control(ALCHEMY_USB_OHCI0, 1)) { + unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ? + ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; + if (alchemy_usb_control(unit, 1)) { printk(KERN_INFO "%s: controller init failed!\n", pdev->name); ret = -ENODEV; goto err3; @@ -135,7 +137,7 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) return ret; } - alchemy_usb_control(ALCHEMY_USB_OHCI0, 0); + alchemy_usb_control(unit, 0); err3: iounmap(hcd->regs); err2: @@ -148,9 +150,12 @@ err1: static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); + int unit; + unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ? + ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; usb_remove_hcd(hcd); - alchemy_usb_control(ALCHEMY_USB_OHCI0, 0); + alchemy_usb_control(unit, 0); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index d83e967e4e15..acd4ba555e3a 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1763,16 +1763,16 @@ config FB_AU1100 au1100fb:panel=. config FB_AU1200 - bool "Au1200 LCD Driver" + bool "Au1200/Au1300 LCD Driver" depends on (FB = y) && MIPS_ALCHEMY select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select FB_SYS_FOPS help - This is the framebuffer driver for the AMD Au1200 SOC. It can drive - various panels and CRTs by passing in kernel cmd line option - au1200fb:panel=. + This is the framebuffer driver for the Au1200/Au1300 SOCs. + It can drive various panels and CRTs by passing in kernel cmd line + option au1200fb:panel=. config FB_VT8500 bool "VT8500 LCD Driver" diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index 649cb35de4ed..de9da6774fd9 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -60,18 +60,6 @@ #include "au1100fb.h" -/* - * Sanity check. If this is a new Au1100 based board, search for - * the PB1100 ifdefs to make sure you modify the code accordingly. - */ -#if defined(CONFIG_MIPS_PB1100) - #include -#elif defined(CONFIG_MIPS_DB1100) - #include -#else - #error "Unknown Au1100 board, Au1100 FB driver not supported" -#endif - #define DRIVER_NAME "au1100fb" #define DRIVER_DESC "LCD controller driver for AU1100 processors" diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c index 72005598040f..04e4479d5afd 100644 --- a/drivers/video/au1200fb.c +++ b/drivers/video/au1200fb.c @@ -44,6 +44,7 @@ #include #include +#include /* platform_data */ #include "au1200fb.h" #define DRIVER_NAME "au1200fb" @@ -143,6 +144,7 @@ struct au1200_lcd_iodata_t { /* Private, per-framebuffer management information (independent of the panel itself) */ struct au1200fb_device { struct fb_info *fb_info; /* FB driver info record */ + struct au1200fb_platdata *pd; int plane; unsigned char* fb_mem; /* FrameBuffer memory map */ @@ -201,9 +203,6 @@ struct window_settings { #define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_01 #endif -extern int board_au1200fb_panel_init (void); -extern int board_au1200fb_panel_shutdown (void); - /* * Default window configurations */ @@ -334,8 +333,6 @@ struct panel_settings uint32 mode_toyclksrc; uint32 mode_backlight; uint32 mode_auxpll; - int (*device_init)(void); - int (*device_shutdown)(void); #define Xres min_xres #define Yres min_yres u32 min_xres; /* Minimum horizontal resolution */ @@ -385,8 +382,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 8, /* 96MHz AUXPLL */ - .device_init = NULL, - .device_shutdown = NULL, 320, 320, 240, 240, }, @@ -415,8 +410,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 8, /* 96MHz AUXPLL */ - .device_init = NULL, - .device_shutdown = NULL, 640, 480, 640, 480, }, @@ -445,8 +438,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 8, /* 96MHz AUXPLL */ - .device_init = NULL, - .device_shutdown = NULL, 800, 800, 600, 600, }, @@ -475,8 +466,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 6, /* 72MHz AUXPLL */ - .device_init = NULL, - .device_shutdown = NULL, 1024, 1024, 768, 768, }, @@ -505,8 +494,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 10, /* 120MHz AUXPLL */ - .device_init = NULL, - .device_shutdown = NULL, 1280, 1280, 1024, 1024, }, @@ -535,8 +522,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 8, /* 96MHz AUXPLL */ - .device_init = board_au1200fb_panel_init, - .device_shutdown = board_au1200fb_panel_shutdown, 1024, 1024, 768, 768, }, @@ -568,8 +553,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 8, /* 96MHz AUXPLL */ - .device_init = board_au1200fb_panel_init, - .device_shutdown = board_au1200fb_panel_shutdown, 640, 480, 640, 480, }, @@ -601,8 +584,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 8, /* 96MHz AUXPLL */ - .device_init = board_au1200fb_panel_init, - .device_shutdown = board_au1200fb_panel_shutdown, 320, 320, 240, 240, }, @@ -634,11 +615,43 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 8, /* 96MHz AUXPLL */ - .device_init = board_au1200fb_panel_init, - .device_shutdown = board_au1200fb_panel_shutdown, 856, 856, 480, 480, }, + [9] = { + .name = "DB1300_800x480", + .monspecs = { + .modedb = NULL, + .modedb_len = 0, + .hfmin = 30000, + .hfmax = 70000, + .vfmin = 60, + .vfmax = 60, + .dclkmin = 6000000, + .dclkmax = 28000000, + .input = FB_DISP_RGB, + }, + .mode_screen = LCD_SCREEN_SX_N(800) | + LCD_SCREEN_SY_N(480), + .mode_horztiming = LCD_HORZTIMING_HPW_N(5) | + LCD_HORZTIMING_HND1_N(16) | + LCD_HORZTIMING_HND2_N(8), + .mode_verttiming = LCD_VERTTIMING_VPW_N(4) | + LCD_VERTTIMING_VND1_N(8) | + LCD_VERTTIMING_VND2_N(5), + .mode_clkcontrol = LCD_CLKCONTROL_PCD_N(1) | + LCD_CLKCONTROL_IV | + LCD_CLKCONTROL_IH, + .mode_pwmdiv = 0x00000000, + .mode_pwmhi = 0x00000000, + .mode_outmask = 0x00FFFFFF, + .mode_fifoctrl = 0x2f2f2f2f, + .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ + .mode_backlight = 0x00000000, + .mode_auxpll = (48/12) * 2, + 800, 800, + 480, 480, + }, }; #define NUM_PANELS (ARRAY_SIZE(known_lcd_panels)) @@ -764,7 +777,8 @@ static int au1200_setlocation (struct au1200fb_device *fbdev, int plane, return 0; } -static void au1200_setpanel (struct panel_settings *newpanel) +static void au1200_setpanel(struct panel_settings *newpanel, + struct au1200fb_platdata *pd) { /* * Perform global setup/init of LCD controller @@ -798,8 +812,8 @@ static void au1200_setpanel (struct panel_settings *newpanel) the controller, the clock cannot be turned off before first shutting down the controller. */ - if (panel->device_shutdown != NULL) - panel->device_shutdown(); + if (pd->panel_shutdown) + pd->panel_shutdown(); } /* Newpanel == NULL indicates a shutdown operation only */ @@ -852,7 +866,8 @@ static void au1200_setpanel (struct panel_settings *newpanel) au_sync(); /* Call init of panel */ - if (panel->device_init != NULL) panel->device_init(); + if (pd->panel_init) + pd->panel_init(); /* FIX!!!! not appropriate on panel change!!! Global setup/init */ lcd->intenable = 0; @@ -1185,6 +1200,8 @@ static int au1200fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, */ static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi) { + struct au1200fb_device *fbdev = fbi->par; + /* Short-circuit screen blanking */ if (noblanking) return 0; @@ -1194,13 +1211,13 @@ static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi) case FB_BLANK_UNBLANK: case FB_BLANK_NORMAL: /* printk("turn on panel\n"); */ - au1200_setpanel(panel); + au1200_setpanel(panel, fbdev->pd); break; case FB_BLANK_VSYNC_SUSPEND: case FB_BLANK_HSYNC_SUSPEND: case FB_BLANK_POWERDOWN: /* printk("turn off panel\n"); */ - au1200_setpanel(NULL); + au1200_setpanel(NULL, fbdev->pd); break; default: break; @@ -1428,6 +1445,7 @@ static void get_window(unsigned int plane, static int au1200fb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) { + struct au1200fb_device *fbdev = info->par; int plane; int val; @@ -1472,7 +1490,7 @@ static int au1200fb_ioctl(struct fb_info *info, unsigned int cmd, struct panel_settings *newpanel; panel_index = iodata.global.panel_choice; newpanel = &known_lcd_panels[panel_index]; - au1200_setpanel(newpanel); + au1200_setpanel(newpanel, fbdev->pd); } break; @@ -1588,22 +1606,102 @@ static int au1200fb_init_fbinfo(struct au1200fb_device *fbdev) /*-------------------------------------------------------------------------*/ -/* AU1200 LCD controller device driver */ +static int au1200fb_setup(struct au1200fb_platdata *pd) +{ + char *options = NULL; + char *this_opt, *endptr; + int num_panels = ARRAY_SIZE(known_lcd_panels); + int panel_idx = -1; + + fb_get_options(DRIVER_NAME, &options); + + if (!options) + goto out; + + while ((this_opt = strsep(&options, ",")) != NULL) { + /* Panel option - can be panel name, + * "bs" for board-switch, or number/index */ + if (!strncmp(this_opt, "panel:", 6)) { + int i; + long int li; + char *endptr; + this_opt += 6; + /* First check for index, which allows + * to short circuit this mess */ + li = simple_strtol(this_opt, &endptr, 0); + if (*endptr == '\0') + panel_idx = (int)li; + else if (strcmp(this_opt, "bs") == 0) + panel_idx = pd->panel_index(); + else { + for (i = 0; i < num_panels; i++) { + if (!strcmp(this_opt, + known_lcd_panels[i].name)) { + panel_idx = i; + break; + } + } + } + if ((panel_idx < 0) || (panel_idx >= num_panels)) + print_warn("Panel %s not supported!", this_opt); + else + panel_index = panel_idx; + + } else if (strncmp(this_opt, "nohwcursor", 10) == 0) + nohwcursor = 1; + else if (strncmp(this_opt, "devices:", 8) == 0) { + this_opt += 8; + device_count = simple_strtol(this_opt, &endptr, 0); + if ((device_count < 0) || + (device_count > MAX_DEVICE_COUNT)) + device_count = MAX_DEVICE_COUNT; + } else if (strncmp(this_opt, "wincfg:", 7) == 0) { + this_opt += 7; + window_index = simple_strtol(this_opt, &endptr, 0); + if ((window_index < 0) || + (window_index >= ARRAY_SIZE(windows))) + window_index = DEFAULT_WINDOW_INDEX; + } else if (strncmp(this_opt, "off", 3) == 0) + return 1; + else + print_warn("Unsupported option \"%s\"", this_opt); + } + +out: + return 0; +} + +/* AU1200 LCD controller device driver */ static int __devinit au1200fb_drv_probe(struct platform_device *dev) { struct au1200fb_device *fbdev; + struct au1200fb_platdata *pd; struct fb_info *fbi = NULL; unsigned long page; int bpp, plane, ret, irq; + print_info("" DRIVER_DESC ""); + + pd = dev->dev.platform_data; + if (!pd) + return -ENODEV; + + /* Setup driver with options */ + if (au1200fb_setup(pd)) + return -ENODEV; + + /* Point to the panel selected */ + panel = &known_lcd_panels[panel_index]; + win = &windows[window_index]; + + printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name); + printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name); + /* shut gcc up */ ret = 0; fbdev = NULL; - /* Kickstart the panel */ - au1200_setpanel(panel); - for (plane = 0; plane < device_count; ++plane) { bpp = winbpp(win->w[plane].mode_winctrl1); if (win->w[plane].xres == 0) @@ -1619,6 +1717,7 @@ static int __devinit au1200fb_drv_probe(struct platform_device *dev) _au1200fb_infos[plane] = fbi; fbdev = fbi->par; fbdev->fb_info = fbi; + fbdev->pd = pd; fbdev->plane = plane; @@ -1680,6 +1779,11 @@ static int __devinit au1200fb_drv_probe(struct platform_device *dev) goto failed; } + platform_set_drvdata(dev, pd); + + /* Kickstart the panel */ + au1200_setpanel(panel, pd); + return 0; failed: @@ -1699,12 +1803,13 @@ failed: static int __devexit au1200fb_drv_remove(struct platform_device *dev) { + struct au1200fb_platdata *pd = platform_get_drvdata(dev); struct au1200fb_device *fbdev; struct fb_info *fbi; int plane; /* Turn off the panel */ - au1200_setpanel(NULL); + au1200_setpanel(NULL, pd); for (plane = 0; plane < device_count; ++plane) { fbi = _au1200fb_infos[plane]; @@ -1732,7 +1837,8 @@ static int __devexit au1200fb_drv_remove(struct platform_device *dev) #ifdef CONFIG_PM static int au1200fb_drv_suspend(struct device *dev) { - au1200_setpanel(NULL); + struct au1200fb_platdata *pd = dev_get_drvdata(dev); + au1200_setpanel(NULL, pd); lcd->outmask = 0; au_sync(); @@ -1742,11 +1848,12 @@ static int au1200fb_drv_suspend(struct device *dev) static int au1200fb_drv_resume(struct device *dev) { + struct au1200fb_platdata *pd = dev_get_drvdata(dev); struct fb_info *fbi; int i; /* Kickstart the panel */ - au1200_setpanel(panel); + au1200_setpanel(panel, pd); for (i = 0; i < device_count; i++) { fbi = _au1200fb_infos[i]; @@ -1781,100 +1888,8 @@ static struct platform_driver au1200fb_driver = { /*-------------------------------------------------------------------------*/ -/* Kernel driver */ - -static int au1200fb_setup(void) -{ - char *options = NULL; - char *this_opt, *endptr; - int num_panels = ARRAY_SIZE(known_lcd_panels); - int panel_idx = -1; - - fb_get_options(DRIVER_NAME, &options); - - if (options) { - while ((this_opt = strsep(&options,",")) != NULL) { - /* Panel option - can be panel name, - * "bs" for board-switch, or number/index */ - if (!strncmp(this_opt, "panel:", 6)) { - int i; - long int li; - char *endptr; - this_opt += 6; - /* First check for index, which allows - * to short circuit this mess */ - li = simple_strtol(this_opt, &endptr, 0); - if (*endptr == '\0') { - panel_idx = (int)li; - } - else if (strcmp(this_opt, "bs") == 0) { - extern int board_au1200fb_panel(void); - panel_idx = board_au1200fb_panel(); - } - - else - for (i = 0; i < num_panels; i++) { - if (!strcmp(this_opt, known_lcd_panels[i].name)) { - panel_idx = i; - break; - } - } - - if ((panel_idx < 0) || (panel_idx >= num_panels)) { - print_warn("Panel %s not supported!", this_opt); - } - else - panel_index = panel_idx; - } - - else if (strncmp(this_opt, "nohwcursor", 10) == 0) { - nohwcursor = 1; - } - - else if (strncmp(this_opt, "devices:", 8) == 0) { - this_opt += 8; - device_count = simple_strtol(this_opt, - &endptr, 0); - if ((device_count < 0) || - (device_count > MAX_DEVICE_COUNT)) - device_count = MAX_DEVICE_COUNT; - } - - else if (strncmp(this_opt, "wincfg:", 7) == 0) { - this_opt += 7; - window_index = simple_strtol(this_opt, - &endptr, 0); - if ((window_index < 0) || - (window_index >= ARRAY_SIZE(windows))) - window_index = DEFAULT_WINDOW_INDEX; - } - - else if (strncmp(this_opt, "off", 3) == 0) - return 1; - /* Unsupported option */ - else { - print_warn("Unsupported option \"%s\"", this_opt); - } - } - } - return 0; -} - static int __init au1200fb_init(void) { - print_info("" DRIVER_DESC ""); - - /* Setup driver with options */ - if (au1200fb_setup()) - return -ENODEV; - - /* Point to the panel selected */ - panel = &known_lcd_panels[panel_index]; - win = &windows[window_index]; - - printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name); - printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name); - return platform_driver_register(&au1200fb_driver); } diff --git a/sound/soc/au1x/Kconfig b/sound/soc/au1x/Kconfig index e908a8123110..a56104040e83 100644 --- a/sound/soc/au1x/Kconfig +++ b/sound/soc/au1x/Kconfig @@ -1,13 +1,13 @@ ## -## Au1200/Au1550 PSC + DBDMA +## Au1200/Au1550/Au1300 PSC + DBDMA ## config SND_SOC_AU1XPSC - tristate "SoC Audio for Au1200/Au1250/Au1550" + tristate "SoC Audio for Au12xx/Au13xx/Au1550" depends on MIPS_ALCHEMY help This option enables support for the Programmable Serial Controllers in AC97 and I2S mode, and the Descriptor-Based DMA - Controller (DBDMA) as found on the Au1200/Au1250/Au1550 SoC. + Controller (DBDMA) as found on the Au12xx/Au13xx/Au1550 SoC. config SND_SOC_AU1XPSC_I2S tristate @@ -51,12 +51,14 @@ config SND_SOC_DB1000 of boards (DB1000/DB1500/DB1100). config SND_SOC_DB1200 - tristate "DB1200 AC97+I2S audio support" + tristate "DB1200/DB1300/DB1550 Audio support" depends on SND_SOC_AU1XPSC select SND_SOC_AU1XPSC_AC97 select SND_SOC_AC97_CODEC + select SND_SOC_WM9712 select SND_SOC_AU1XPSC_I2S select SND_SOC_WM8731 help - Select this option to enable audio (AC97 or I2S) on the - Alchemy/AMD/RMI DB1200 demoboard. + Select this option to enable audio (AC97 and I2S) on the + Alchemy/AMD/RMI/NetLogic Db1200, Db1550 and Db1300 evaluation boards. + If you need Db1300 touchscreen support, you definitely want to say Y. diff --git a/sound/soc/au1x/db1200.c b/sound/soc/au1x/db1200.c index 289312c14b99..44ad11827364 100644 --- a/sound/soc/au1x/db1200.c +++ b/sound/soc/au1x/db1200.c @@ -1,5 +1,5 @@ /* - * DB1200 ASoC audio fabric support code. + * DB1200/DB1300/DB1550 ASoC audio fabric support code. * * (c) 2008-2011 Manuel Lauss * @@ -28,6 +28,18 @@ static struct platform_device_id db1200_pids[] = { }, { .name = "db1200-i2s", .driver_data = 1, + }, { + .name = "db1300-ac97", + .driver_data = 2, + }, { + .name = "db1300-i2s", + .driver_data = 3, + }, { + .name = "db1550-ac97", + .driver_data = 4, + }, { + .name = "db1550-i2s", + .driver_data = 5, }, {}, }; @@ -49,6 +61,27 @@ static struct snd_soc_card db1200_ac97_machine = { .num_links = 1, }; +static struct snd_soc_dai_link db1300_ac97_dai = { + .name = "AC97", + .stream_name = "AC97 HiFi", + .codec_dai_name = "wm9712-hifi", + .cpu_dai_name = "au1xpsc_ac97.1", + .platform_name = "au1xpsc-pcm.1", + .codec_name = "wm9712-codec.1", +}; + +static struct snd_soc_card db1300_ac97_machine = { + .name = "DB1300_AC97", + .dai_link = &db1300_ac97_dai, + .num_links = 1, +}; + +static struct snd_soc_card db1550_ac97_machine = { + .name = "DB1550_AC97", + .dai_link = &db1200_ac97_dai, + .num_links = 1, +}; + /*------------------------- I2S PART ---------------------------*/ static int db1200_i2s_startup(struct snd_pcm_substream *substream) @@ -98,11 +131,47 @@ static struct snd_soc_card db1200_i2s_machine = { .num_links = 1, }; +static struct snd_soc_dai_link db1300_i2s_dai = { + .name = "WM8731", + .stream_name = "WM8731 PCM", + .codec_dai_name = "wm8731-hifi", + .cpu_dai_name = "au1xpsc_i2s.2", + .platform_name = "au1xpsc-pcm.2", + .codec_name = "wm8731.0-001b", + .ops = &db1200_i2s_wm8731_ops, +}; + +static struct snd_soc_card db1300_i2s_machine = { + .name = "DB1300_I2S", + .dai_link = &db1300_i2s_dai, + .num_links = 1, +}; + +static struct snd_soc_dai_link db1550_i2s_dai = { + .name = "WM8731", + .stream_name = "WM8731 PCM", + .codec_dai_name = "wm8731-hifi", + .cpu_dai_name = "au1xpsc_i2s.3", + .platform_name = "au1xpsc-pcm.3", + .codec_name = "wm8731.0-001b", + .ops = &db1200_i2s_wm8731_ops, +}; + +static struct snd_soc_card db1550_i2s_machine = { + .name = "DB1550_I2S", + .dai_link = &db1550_i2s_dai, + .num_links = 1, +}; + /*------------------------- COMMON PART ---------------------------*/ static struct snd_soc_card *db1200_cards[] __devinitdata = { &db1200_ac97_machine, &db1200_i2s_machine, + &db1300_ac97_machine, + &db1300_i2s_machine, + &db1550_ac97_machine, + &db1550_i2s_machine, }; static int __devinit db1200_audio_probe(struct platform_device *pdev) @@ -147,5 +216,5 @@ module_init(db1200_audio_load); module_exit(db1200_audio_unload); MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("DB1200 ASoC audio support"); +MODULE_DESCRIPTION("DB1200/DB1300/DB1550 ASoC audio support"); MODULE_AUTHOR("Manuel Lauss");