pinctrl: imx27: fix wrong offset to ICONFB

The offset to ICONFB was incorrect, this patch set the correct value 0x14.
dev_dbg in function imx1_write_2bit print the wrong address and had been
moved after address calculation.

Cc: stable@vger.kernel.org
Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Reviewed-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Chris Ruehl 2014-01-22 11:14:51 +08:00 committed by Linus Walleij
parent b0dcfd8732
commit 795779df22

View File

@ -45,7 +45,7 @@ struct imx1_pinctrl {
#define MX1_DDIR 0x00 #define MX1_DDIR 0x00
#define MX1_OCR 0x04 #define MX1_OCR 0x04
#define MX1_ICONFA 0x0c #define MX1_ICONFA 0x0c
#define MX1_ICONFB 0x10 #define MX1_ICONFB 0x14
#define MX1_GIUS 0x20 #define MX1_GIUS 0x20
#define MX1_GPR 0x38 #define MX1_GPR 0x38
#define MX1_PUEN 0x40 #define MX1_PUEN 0x40
@ -97,13 +97,13 @@ static void imx1_write_2bit(struct imx1_pinctrl *ipctl, unsigned int pin_id,
u32 old_val; u32 old_val;
u32 new_val; u32 new_val;
dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n",
reg, offset, value);
/* Use the next register if the pin's port pin number is >=16 */ /* Use the next register if the pin's port pin number is >=16 */
if (pin_id % 32 >= 16) if (pin_id % 32 >= 16)
reg += 0x04; reg += 0x04;
dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n",
reg, offset, value);
/* Get current state of pins */ /* Get current state of pins */
old_val = readl(reg); old_val = readl(reg);
old_val &= mask; old_val &= mask;