korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-18 00:24:58 +08:00
Code Issues Packages Projects Releases Wiki Activity

Marvell phy: add configuration of autonegociation for fiber link.

Browse Source 
To be correctly initilized, the fiber interface needs
to be configured via autonegociation registers which use
some customs options or registers.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Charles-Antoine Couret <charles-antoine.couret@nexvision.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Charles-Antoine Couret 2016-07-19 11:13:12 +02:00 committed by David S. Miller
parent 2170fef78a
commit 78301ebe9b
1 changed files with 109 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

111
drivers/net/phy/marvell.c
View File

@ -493,15 +493,122 @@ static int m88e1318_config_aneg(struct phy_device *phydev)
return m88e1121_config_aneg(phydev);
}
/**
* ethtool_adv_to_fiber_adv_t
* @ethadv: the ethtool advertisement settings
*
* A small helper function that translates ethtool advertisement
* settings to phy autonegotiation advertisements for the
* MII_ADV register for fiber link.
*/
static inline u32 ethtool_adv_to_fiber_adv_t(u32 ethadv)
{
u32 result = 0;
if (ethadv & ADVERTISED_1000baseT_Half)
result |= ADVERTISE_FIBER_1000HALF;
if (ethadv & ADVERTISED_1000baseT_Full)
result |= ADVERTISE_FIBER_1000FULL;
if ((ethadv & ADVERTISE_PAUSE_ASYM) && (ethadv & ADVERTISE_PAUSE_CAP))
result |= LPA_PAUSE_ASYM_FIBER;
else if (ethadv & ADVERTISE_PAUSE_CAP)
result |= (ADVERTISE_PAUSE_FIBER
& (~ADVERTISE_PAUSE_ASYM_FIBER));
return result;
}
/**
* marvell_config_aneg_fiber - restart auto-negotiation or write BMCR
* @phydev: target phy_device struct
*
* Description: If auto-negotiation is enabled, we configure the
* advertising, and then restart auto-negotiation. If it is not
* enabled, then we write the BMCR. Adapted for fiber link in
* some Marvell's devices.
*/
static int marvell_config_aneg_fiber(struct phy_device *phydev)
{
int changed = 0;
int err;
int adv, oldadv;
u32 advertise;
if (phydev->autoneg != AUTONEG_ENABLE)
return genphy_setup_forced(phydev);
/* Only allow advertising what this PHY supports */
phydev->advertising &= phydev->supported;
advertise = phydev->advertising;
/* Setup fiber advertisement */
adv = phy_read(phydev, MII_ADVERTISE);
if (adv < 0)
return adv;
oldadv = adv;
adv &= ~(ADVERTISE_FIBER_1000HALF | ADVERTISE_FIBER_1000FULL
| LPA_PAUSE_FIBER);
adv |= ethtool_adv_to_fiber_adv_t(advertise);
if (adv != oldadv) {
err = phy_write(phydev, MII_ADVERTISE, adv);
if (err < 0)
return err;
changed = 1;
}
if (changed == 0) {
/* Advertisement hasn't changed, but maybe aneg was never on to
* begin with? Or maybe phy was isolated?
*/
int ctl = phy_read(phydev, MII_BMCR);
if (ctl < 0)
return ctl;
if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
changed = 1; /* do restart aneg */
}
/* Only restart aneg if we are advertising something different
* than we were before.
*/
if (changed > 0)
changed = genphy_restart_aneg(phydev);
return changed;
}
static int m88e1510_config_aneg(struct phy_device *phydev)
{
int err;
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
if (err < 0)
goto error;
/* Configure the copper link first */
err = m88e1318_config_aneg(phydev);
if (err < 0)
return err;
goto error;
return 0;
/* Then the fiber link */
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_FIBER);
if (err < 0)
goto error;
err = marvell_config_aneg_fiber(phydev);
if (err < 0)
goto error;
return phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
error:
phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
return err;
}
static int marvell_config_init(struct phy_device *phydev)