brcm80211: fmac: make brcmf_net_attach() static

The function brcmf_net_attach() is only used within dhd_linux.c so
it does not need to be extern. This patch makes the function static.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Arend van Spriel 2012-04-11 11:52:43 +02:00 committed by John W. Linville
parent 0446b49c33
commit 75c49904c9
2 changed files with 58 additions and 59 deletions

View File

@ -632,7 +632,6 @@ extern const struct bcmevent_name bcmevent_names[];
extern uint brcmf_c_mkiovar(char *name, char *data, uint datalen,
char *buf, uint len);
extern int brcmf_net_attach(struct brcmf_pub *drvr, int idx);
extern int brcmf_netdev_wait_pend8021x(struct net_device *ndev);
extern s32 brcmf_exec_dcmd(struct net_device *dev, u32 cmd, void *arg, u32 len);

View File

@ -843,6 +843,64 @@ static const struct net_device_ops brcmf_netdev_ops_pri = {
.ndo_set_rx_mode = brcmf_netdev_set_multicast_list
};
static int brcmf_net_attach(struct brcmf_pub *drvr, int ifidx)
{
struct net_device *ndev;
u8 temp_addr[ETH_ALEN] = {
0x00, 0x90, 0x4c, 0x11, 0x22, 0x33};
brcmf_dbg(TRACE, "ifidx %d\n", ifidx);
ndev = drvr->iflist[ifidx]->ndev;
ndev->netdev_ops = &brcmf_netdev_ops_pri;
/*
* We have to use the primary MAC for virtual interfaces
*/
if (ifidx != 0) {
/* for virtual interfaces use the primary MAC */
memcpy(temp_addr, drvr->mac, ETH_ALEN);
}
if (ifidx == 1) {
brcmf_dbg(TRACE, "ACCESS POINT MAC:\n");
/* ACCESSPOINT INTERFACE CASE */
temp_addr[0] |= 0X02; /* set bit 2 ,
- Locally Administered address */
}
ndev->hard_header_len = ETH_HLEN + drvr->hdrlen;
ndev->ethtool_ops = &brcmf_ethtool_ops;
drvr->rxsz = ndev->mtu + ndev->hard_header_len +
drvr->hdrlen;
memcpy(ndev->dev_addr, temp_addr, ETH_ALEN);
/* attach to cfg80211 for primary interface */
if (!ifidx) {
drvr->config = brcmf_cfg80211_attach(ndev, drvr->dev, drvr);
if (drvr->config == NULL) {
brcmf_dbg(ERROR, "wl_cfg80211_attach failed\n");
goto fail;
}
}
if (register_netdev(ndev) != 0) {
brcmf_dbg(ERROR, "couldn't register the net device\n");
goto fail;
}
brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name);
return 0;
fail:
ndev->netdev_ops = NULL;
return -EBADE;
}
int
brcmf_add_if(struct device *dev, int ifidx, char *name, u8 *mac_addr)
{
@ -1021,64 +1079,6 @@ int brcmf_bus_start(struct device *dev)
return 0;
}
int brcmf_net_attach(struct brcmf_pub *drvr, int ifidx)
{
struct net_device *ndev;
u8 temp_addr[ETH_ALEN] = {
0x00, 0x90, 0x4c, 0x11, 0x22, 0x33};
brcmf_dbg(TRACE, "ifidx %d\n", ifidx);
ndev = drvr->iflist[ifidx]->ndev;
ndev->netdev_ops = &brcmf_netdev_ops_pri;
/*
* We have to use the primary MAC for virtual interfaces
*/
if (ifidx != 0) {
/* for virtual interfaces use the primary MAC */
memcpy(temp_addr, drvr->mac, ETH_ALEN);
}
if (ifidx == 1) {
brcmf_dbg(TRACE, "ACCESS POINT MAC:\n");
/* ACCESSPOINT INTERFACE CASE */
temp_addr[0] |= 0X02; /* set bit 2 ,
- Locally Administered address */
}
ndev->hard_header_len = ETH_HLEN + drvr->hdrlen;
ndev->ethtool_ops = &brcmf_ethtool_ops;
drvr->rxsz = ndev->mtu + ndev->hard_header_len +
drvr->hdrlen;
memcpy(ndev->dev_addr, temp_addr, ETH_ALEN);
/* attach to cfg80211 for primary interface */
if (!ifidx) {
drvr->config = brcmf_cfg80211_attach(ndev, drvr->dev, drvr);
if (drvr->config == NULL) {
brcmf_dbg(ERROR, "wl_cfg80211_attach failed\n");
goto fail;
}
}
if (register_netdev(ndev) != 0) {
brcmf_dbg(ERROR, "couldn't register the net device\n");
goto fail;
}
brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name);
return 0;
fail:
ndev->netdev_ops = NULL;
return -EBADE;
}
static void brcmf_bus_detach(struct brcmf_pub *drvr)
{
brcmf_dbg(TRACE, "Enter\n");