usb: chipidea: use common definition for USBMODE bits

Some of the bits of USBMODE register are defined in <usb/ehci_def.h>,
use them instead of having our own definitions.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Alexander Shishkin 2012-05-11 17:25:53 +03:00 committed by Greg Kroah-Hartman
parent f7daaa2d6e
commit 758fc9860c
3 changed files with 8 additions and 8 deletions

View File

@ -13,6 +13,8 @@
#ifndef __DRIVERS_USB_CHIPIDEA_BITS_H
#define __DRIVERS_USB_CHIPIDEA_BITS_H
#include <linux/usb/ehci_def.h>
/* HCCPARAMS */
#define HCCPARAMS_LEN BIT(17)
@ -70,11 +72,9 @@
/* USBMODE */
#define USBMODE_CM (0x03UL << 0)
#define USBMODE_CM_IDLE (0x00UL << 0)
#define USBMODE_CM_DEVICE (0x02UL << 0)
#define USBMODE_CM_HOST (0x03UL << 0)
#define USBMODE_CM_DC (0x02UL << 0)
#define USBMODE_SLOM BIT(3)
#define USBMODE_SDIS BIT(4)
#define USBMODE_CI_SDIS BIT(4)
/* ENDPTCTRL */
#define ENDPTCTRL_RXS BIT(0)

View File

@ -231,15 +231,15 @@ int hw_device_reset(struct ci13xxx *ci)
CI13XXX_CONTROLLER_RESET_EVENT);
if (ci->udc_driver->flags & CI13XXX_DISABLE_STREAMING)
hw_write(ci, OP_USBMODE, USBMODE_SDIS, USBMODE_SDIS);
hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
/* USBMODE should be configured step by step */
hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DEVICE);
hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DC);
/* HW >= 2.3 */
hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM);
if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DEVICE) {
if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) {
pr_err("cannot enter in device mode");
pr_err("lpm = %i", ci->hw_bank.lpm);
return -ENODEV;

View File

@ -1606,7 +1606,7 @@ static irqreturn_t udc_irq(struct ci13xxx *udc)
if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) {
if (hw_read(udc, OP_USBMODE, USBMODE_CM) !=
USBMODE_CM_DEVICE) {
USBMODE_CM_DC) {
spin_unlock(&udc->lock);
return IRQ_NONE;
}