mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-09-22 22:11:38 +08:00
dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema
Convert the fsl,imx6q-pcie.txt into a schema. - ranges property should be grouped by region, with no functional changes. - only one propert is allowed in the compatible string, remove "snps,dw-pcie". Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Link: https://lore.kernel.org/r/1630046580-19282-2-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Richard Zhu
Rob Herring
parent
1c3ac086fd
commit
751ca492f1
@ -1,100 +0,0 @@
|
||||
* Freescale i.MX6 PCIe interface
|
||||
|
||||
This PCIe host controller is based on the Synopsys DesignWare PCIe IP
|
||||
and thus inherits all the common properties defined in snps,dw-pcie.yaml.
|
||||
|
||||
Required properties:
|
||||
- compatible:
|
||||
- "fsl,imx6q-pcie"
|
||||
- "fsl,imx6sx-pcie",
|
||||
- "fsl,imx6qp-pcie"
|
||||
- "fsl,imx7d-pcie"
|
||||
- "fsl,imx8mq-pcie"
|
||||
- reg: base address and length of the PCIe controller
|
||||
- interrupts: A list of interrupt outputs of the controller. Must contain an
|
||||
entry for each entry in the interrupt-names property.
|
||||
- interrupt-names: Must include the following entries:
|
||||
- "msi": The interrupt that is asserted when an MSI is received
|
||||
- clock-names: Must include the following additional entries:
|
||||
- "pcie_phy"
|
||||
|
||||
Optional properties:
|
||||
- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0
|
||||
- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0
|
||||
- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20
|
||||
- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127
|
||||
- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127
|
||||
- fsl,max-link-speed: Specify PCI gen for link capability. Must be '2' for
|
||||
gen2, otherwise will default to gen1. Note that the IMX6 LVDS clock outputs
|
||||
do not meet gen2 jitter requirements and thus for gen2 capability a gen2
|
||||
compliant clock generator should be used and configured.
|
||||
- reset-gpio: Should specify the GPIO for controlling the PCI bus device reset
|
||||
signal. It's not polarity aware and defaults to active-low reset sequence
|
||||
(L=reset state, H=operation state).
|
||||
- reset-gpio-active-high: If present then the reset sequence using the GPIO
|
||||
specified in the "reset-gpio" property is reversed (H=reset state,
|
||||
L=operation state).
|
||||
- vpcie-supply: Should specify the regulator in charge of PCIe port power.
|
||||
The regulator will be enabled when initializing the PCIe host and
|
||||
disabled either as part of the init process or when shutting down the
|
||||
host.
|
||||
- vph-supply: Should specify the regulator in charge of VPH one of the three
|
||||
PCIe PHY powers. This regulator can be supplied by both 1.8v and 3.3v voltage
|
||||
supplies.
|
||||
|
||||
Additional required properties for imx6sx-pcie:
|
||||
- clock names: Must include the following additional entries:
|
||||
- "pcie_inbound_axi"
|
||||
- power-domains: Must be set to phandles pointing to the DISPLAY and
|
||||
PCIE_PHY power domains
|
||||
- power-domain-names: Must be "pcie", "pcie_phy"
|
||||
|
||||
Additional required properties for imx7d-pcie and imx8mq-pcie:
|
||||
- power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
|
||||
- resets: Must contain phandles to PCIe-related reset lines exposed by SRC
|
||||
IP block
|
||||
- reset-names: Must contain the following entries:
|
||||
- "pciephy"
|
||||
- "apps"
|
||||
- "turnoff"
|
||||
- fsl,imx7d-pcie-phy: A phandle to an fsl,imx7d-pcie-phy node.
|
||||
|
||||
Additional required properties for imx8mq-pcie:
|
||||
- clock-names: Must include the following additional entries:
|
||||
- "pcie_aux"
|
||||
|
||||
Example:
|
||||
|
||||
pcie@01000000 {
|
||||
compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
|
||||
reg = <0x01ffc000 0x04000>,
|
||||
<0x01f00000 0x80000>;
|
||||
reg-names = "dbi", "config";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
device_type = "pci";
|
||||
ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000
|
||||
0x81000000 0 0 0x01f80000 0 0x00010000
|
||||
0x82000000 0 0x01000000 0x01000000 0 0x00f00000>;
|
||||
num-lanes = <1>;
|
||||
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "msi";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0x7>;
|
||||
interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks 144>, <&clks 206>, <&clks 189>;
|
||||
clock-names = "pcie", "pcie_bus", "pcie_phy";
|
||||
};
|
||||
|
||||
* Freescale i.MX7d PCIe PHY
|
||||
|
||||
This is the PHY associated with the IMX7d PCIe controller. It's used by the
|
||||
PCI-e controller via the fsl,imx7d-pcie-phy phandle.
|
||||
|
||||
Required properties:
|
||||
- compatible:
|
||||
- "fsl,imx7d-pcie-phy"
|
||||
- reg: base address and length of the PCIe PHY controller
|
||||
202
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
Normal file
202
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
Normal file
@ -0,0 +1,202 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Freescale i.MX6 PCIe host controller
|
||||
|
||||
maintainers:
|
||||
- Lucas Stach <l.stach@pengutronix.de>
|
||||
- Richard Zhu <hongxing.zhu@nxp.com>
|
||||
|
||||
description: |+
|
||||
This PCIe host controller is based on the Synopsys DesignWare PCIe IP
|
||||
and thus inherits all the common properties defined in snps,dw-pcie.yaml.
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/pci/snps,dw-pcie.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- fsl,imx6q-pcie
|
||||
- fsl,imx6sx-pcie
|
||||
- fsl,imx6qp-pcie
|
||||
- fsl,imx7d-pcie
|
||||
- fsl,imx8mq-pcie
|
||||
|
||||
reg:
|
||||
items:
|
||||
- description: Data Bus Interface (DBI) registers.
|
||||
- description: PCIe configuration space region.
|
||||
|
||||
reg-names:
|
||||
items:
|
||||
- const: dbi
|
||||
- const: config
|
||||
|
||||
interrupts:
|
||||
items:
|
||||
- description: builtin MSI controller.
|
||||
|
||||
interrupt-names:
|
||||
minItems: 1
|
||||
items:
|
||||
- const: msi
|
||||
|
||||
clocks:
|
||||
minItems: 3
|
||||
items:
|
||||
- description: PCIe bridge clock.
|
||||
- description: PCIe bus clock.
|
||||
- description: PCIe PHY clock.
|
||||
- description: Additional required clock entry for imx6sx-pcie,
|
||||
imx8mq-pcie.
|
||||
|
||||
clock-names:
|
||||
minItems: 3
|
||||
items:
|
||||
- const: pcie
|
||||
- const: pcie_bus
|
||||
- const: pcie_phy
|
||||
- const: pcie_inbound_axi for imx6sx-pcie, pcie_aux for imx8mq-pcie
|
||||
|
||||
num-lanes:
|
||||
const: 1
|
||||
|
||||
fsl,imx7d-pcie-phy:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
description: A phandle to an fsl,imx7d-pcie-phy node. Additional
|
||||
required properties for imx7d-pcie and imx8mq-pcie.
|
||||
|
||||
power-domains:
|
||||
items:
|
||||
- description: The phandle pointing to the DISPLAY domain for
|
||||
imx6sx-pcie, to PCIE_PHY power domain for imx7d-pcie and
|
||||
imx8mq-pcie.
|
||||
- description: The phandle pointing to the PCIE_PHY power domains
|
||||
for imx6sx-pcie.
|
||||
|
||||
power-domain-names:
|
||||
items:
|
||||
- const: pcie
|
||||
- const: pcie_phy
|
||||
|
||||
resets:
|
||||
maxItems: 3
|
||||
description: Phandles to PCIe-related reset lines exposed by SRC
|
||||
IP block. Additional required by imx7d-pcie and imx8mq-pcie.
|
||||
|
||||
reset-names:
|
||||
items:
|
||||
- const: pciephy
|
||||
- const: apps
|
||||
- const: turnoff
|
||||
|
||||
fsl,tx-deemph-gen1:
|
||||
description: Gen1 De-emphasis value (optional required).
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
default: 0
|
||||
|
||||
fsl,tx-deemph-gen2-3p5db:
|
||||
description: Gen2 (3.5db) De-emphasis value (optional required).
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
default: 0
|
||||
|
||||
fsl,tx-deemph-gen2-6db:
|
||||
description: Gen2 (6db) De-emphasis value (optional required).
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
default: 20
|
||||
|
||||
fsl,tx-swing-full:
|
||||
description: Gen2 TX SWING FULL value (optional required).
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
default: 127
|
||||
|
||||
fsl,tx-swing-low:
|
||||
description: TX launch amplitude swing_low value (optional required).
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
default: 127
|
||||
|
||||
fsl,max-link-speed:
|
||||
description: Specify PCI Gen for link capability (optional required).
|
||||
Note that the IMX6 LVDS clock outputs do not meet gen2 jitter
|
||||
requirements and thus for gen2 capability a gen2 compliant clock
|
||||
generator should be used and configured.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [1, 2, 3, 4]
|
||||
default: 1
|
||||
|
||||
reset-gpio:
|
||||
description: Should specify the GPIO for controlling the PCI bus device
|
||||
reset signal. It's not polarity aware and defaults to active-low reset
|
||||
sequence (L=reset state, H=operation state) (optional required).
|
||||
|
||||
reset-gpio-active-high:
|
||||
description: If present then the reset sequence using the GPIO
|
||||
specified in the "reset-gpio" property is reversed (H=reset state,
|
||||
L=operation state) (optional required).
|
||||
|
||||
vpcie-supply:
|
||||
description: Should specify the regulator in charge of PCIe port power.
|
||||
The regulator will be enabled when initializing the PCIe host and
|
||||
disabled either as part of the init process or when shutting down
|
||||
the host (optional required).
|
||||
|
||||
vph-supply:
|
||||
description: Should specify the regulator in charge of VPH one of
|
||||
the three PCIe PHY powers. This regulator can be supplied by both
|
||||
1.8v and 3.3v voltage supplies (optional required).
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- reg-names
|
||||
- "#address-cells"
|
||||
- "#size-cells"
|
||||
- device_type
|
||||
- bus-range
|
||||
- ranges
|
||||
- num-lanes
|
||||
- interrupts
|
||||
- interrupt-names
|
||||
- "#interrupt-cells"
|
||||
- interrupt-map-mask
|
||||
- interrupt-map
|
||||
- clocks
|
||||
- clock-names
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/imx6qdl-clock.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
pcie: pcie@1ffc000 {
|
||||
compatible = "fsl,imx6q-pcie";
|
||||
reg = <0x01ffc000 0x04000>,
|
||||
<0x01f00000 0x80000>;
|
||||
reg-names = "dbi", "config";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
device_type = "pci";
|
||||
bus-range = <0x00 0xff>;
|
||||
ranges = <0x81000000 0 0 0x01f80000 0 0x00010000>,
|
||||
<0x82000000 0 0x01000000 0x01000000 0 0x00f00000>;
|
||||
num-lanes = <1>;
|
||||
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "msi";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0x7>;
|
||||
interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
|
||||
<&clks IMX6QDL_CLK_LVDS1_GATE>,
|
||||
<&clks IMX6QDL_CLK_PCIE_REF_125M>;
|
||||
clock-names = "pcie", "pcie_bus", "pcie_phy";
|
||||
};
|
||||
...
|
||||
@ -14188,7 +14188,7 @@ M: Lucas Stach <l.stach@pengutronix.de>
|
||||
L: linux-pci@vger.kernel.org
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
|
||||
F: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
|
||||
F: drivers/pci/controller/dwc/*imx6*
|
||||
|
||||
PCI DRIVER FOR FU740
|
||||
|
||||
Loading…
Reference in New Issue
Block a user