From 7040b6d1febfdbd9c1595efb751d492cd2503f96 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 1 May 2014 12:20:22 +0200 Subject: [PATCH] ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback data The TEAC UD-H01 firmware sends wrong feedback frequency values, thus causing the PC to send the samples at a wrong rate, which results in clicks and crackles in the output. Add a workaround to detect and fix the corruption. Signed-off-by: Clemens Ladisch [mick37@gmx.de: use sender->udh01_fb_quirk rather than ep->udh01_fb_quirk in snd_usb_handle_sync_urb()] Reported-and-tested-by: Mick Reported-and-tested-by: Andrea Messa Cc: Signed-off-by: Takashi Iwai --- sound/usb/card.h | 1 + sound/usb/endpoint.c | 15 ++++++++++++++- 2 files changed, 15 insertions(+), 1 deletion(-) diff --git a/sound/usb/card.h b/sound/usb/card.h index 9867ab866857..97acb906acc2 100644 --- a/sound/usb/card.h +++ b/sound/usb/card.h @@ -92,6 +92,7 @@ struct snd_usb_endpoint { unsigned int curframesize; /* current packet size in frames (for capture) */ unsigned int syncmaxsize; /* sync endpoint packet size */ unsigned int fill_max:1; /* fill max packet size always */ + unsigned int udh01_fb_quirk:1; /* corrupted feedback data */ unsigned int datainterval; /* log_2 of data packet interval */ unsigned int syncinterval; /* P for adaptive mode, 0 otherwise */ unsigned char silence_value; diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index e70a87e0d9fe..289f582c9130 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -471,6 +471,10 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip, ep->syncinterval = 3; ep->syncmaxsize = le16_to_cpu(get_endpoint(alts, 1)->wMaxPacketSize); + + if (chip->usb_id == USB_ID(0x0644, 0x8038) /* TEAC UD-H01 */ && + ep->syncmaxsize == 4) + ep->udh01_fb_quirk = 1; } list_add_tail(&ep->list, &chip->ep_list); @@ -1105,7 +1109,16 @@ void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep, if (f == 0) return; - if (unlikely(ep->freqshift == INT_MIN)) { + if (unlikely(sender->udh01_fb_quirk)) { + /* + * The TEAC UD-H01 firmware sometimes changes the feedback value + * by +/- 0x1.0000. + */ + if (f < ep->freqn - 0x8000) + f += 0x10000; + else if (f > ep->freqn + 0x8000) + f -= 0x10000; + } else if (unlikely(ep->freqshift == INT_MIN)) { /* * The first time we see a feedback value, determine its format * by shifting it left or right until it matches the nominal