diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index c7642acfd022..207e27699410 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -22,18 +22,6 @@
 #include <mach/hardware.h>
 
 
-/*
- * The EP93xx has two external crystal oscillators.  To generate the
- * required high-frequency clocks, the processor uses two phase-locked-
- * loops (PLLs) to multiply the incoming external clock signal to much
- * higher frequencies that are then divided down by programmable dividers
- * to produce the needed clocks.  The PLLs operate independently of one
- * another.
- */
-#define EP93XX_EXT_CLK_RATE	14745600
-#define EP93XX_EXT_RTC_RATE	32768
-
-
 struct clk {
 	unsigned long	rate;
 	int		users;
@@ -42,11 +30,14 @@ struct clk {
 	u32		enable_mask;
 
 	unsigned long	(*get_rate)(struct clk *clk);
+	int		(*set_rate)(struct clk *clk, unsigned long rate);
 };
 
 
 static unsigned long get_uart_rate(struct clk *clk);
 
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
+
 
 static struct clk clk_uart1 = {
 	.sw_locked	= 1,
@@ -75,6 +66,12 @@ static struct clk clk_usb_host = {
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
+static struct clk clk_keypad = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
+	.set_rate	= set_keytchclk_rate,
+};
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
@@ -130,27 +127,28 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
-	INIT_CK("apb:uart1", NULL, &clk_uart1),
-	INIT_CK("apb:uart2", NULL, &clk_uart2),
-	INIT_CK("apb:uart3", NULL, &clk_uart3),
-	INIT_CK(NULL, "pll1", &clk_pll1),
-	INIT_CK(NULL, "fclk", &clk_f),
-	INIT_CK(NULL, "hclk", &clk_h),
-	INIT_CK(NULL, "pclk", &clk_p),
-	INIT_CK(NULL, "pll2", &clk_pll2),
-	INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
-	INIT_CK(NULL, "m2p0", &clk_m2p0),
-	INIT_CK(NULL, "m2p1", &clk_m2p1),
-	INIT_CK(NULL, "m2p2", &clk_m2p2),
-	INIT_CK(NULL, "m2p3", &clk_m2p3),
-	INIT_CK(NULL, "m2p4", &clk_m2p4),
-	INIT_CK(NULL, "m2p5", &clk_m2p5),
-	INIT_CK(NULL, "m2p6", &clk_m2p6),
-	INIT_CK(NULL, "m2p7", &clk_m2p7),
-	INIT_CK(NULL, "m2p8", &clk_m2p8),
-	INIT_CK(NULL, "m2p9", &clk_m2p9),
-	INIT_CK(NULL, "m2m0", &clk_m2m0),
-	INIT_CK(NULL, "m2m1", &clk_m2m1),
+	INIT_CK("apb:uart1",		NULL,		&clk_uart1),
+	INIT_CK("apb:uart2",		NULL,		&clk_uart2),
+	INIT_CK("apb:uart3",		NULL,		&clk_uart3),
+	INIT_CK(NULL,			"pll1",		&clk_pll1),
+	INIT_CK(NULL,			"fclk",		&clk_f),
+	INIT_CK(NULL,			"hclk",		&clk_h),
+	INIT_CK(NULL,			"pclk",		&clk_p),
+	INIT_CK(NULL,			"pll2",		&clk_pll2),
+	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
+	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
+	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
+	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
+	INIT_CK(NULL,			"m2p2",		&clk_m2p2),
+	INIT_CK(NULL,			"m2p3",		&clk_m2p3),
+	INIT_CK(NULL,			"m2p4",		&clk_m2p4),
+	INIT_CK(NULL,			"m2p5",		&clk_m2p5),
+	INIT_CK(NULL,			"m2p6",		&clk_m2p6),
+	INIT_CK(NULL,			"m2p7",		&clk_m2p7),
+	INIT_CK(NULL,			"m2p8",		&clk_m2p8),
+	INIT_CK(NULL,			"m2p9",		&clk_m2p9),
+	INIT_CK(NULL,			"m2m0",		&clk_m2m0),
+	INIT_CK(NULL,			"m2m1",		&clk_m2m1),
 };
 
 
@@ -206,6 +204,43 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
+{
+	u32 val;
+	u32 div_bit;
+
+	val = __raw_readl(clk->enable_reg);
+
+	/*
+	 * The Key Matrix and ADC clocks are configured using the same
+	 * System Controller register.  The clock used will be either
+	 * 1/4 or 1/16 the external clock rate depending on the
+	 * EP93XX_SYSCON_KEYTCHCLKDIV_KDIV/EP93XX_SYSCON_KEYTCHCLKDIV_ADIV
+	 * bit being set or cleared.
+	 */
+	div_bit = clk->enable_mask >> 15;
+
+	if (rate == EP93XX_KEYTCHCLK_DIV4)
+		val |= div_bit;
+	else if (rate == EP93XX_KEYTCHCLK_DIV16)
+		val &= ~div_bit;
+	else
+		return -EINVAL;
+
+	ep93xx_syscon_swlocked_write(val, clk->enable_reg);
+	clk->rate = rate;
+	return 0;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	if (clk->set_rate)
+		return clk->set_rate(clk, rate);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
 
 static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
 static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 2866297310b7..587c07bdec5b 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -12,4 +12,18 @@
 
 #include "ts72xx.h"
 
+/*
+ * The EP93xx has two external crystal oscillators.  To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks.  The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE	14745600
+#define EP93XX_EXT_RTC_RATE	32768
+
+#define EP93XX_KEYTCHCLK_DIV4	(EP93XX_EXT_CLK_RATE / 4)
+#define EP93XX_KEYTCHCLK_DIV16	(EP93XX_EXT_CLK_RATE / 16)
+
 #endif