korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-11 12:28:41 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge master.kernel.org:/home/rmk/linux-2.6-arm

Browse Source 
* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits)
  ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
  ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE
  ARM: 6408/1: omap: Map only available sram memory
  ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries
  ARM: pxa: remove pr_<level> uses of KERN_<level>
  ARM: pxa168fb: clear enable bit when not active
  ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configured
  ARM: pxa168: fix corrected reset vector
  ARM: pxa: Use PIO for PI2C communication on Palm27x
  ARM: pxa: Fix Vpac270 gpio_power for MMC
  ARM: 6401/1: plug a race in the alignment trap handler
  ARM: 6406/1: at91sam9g45: fix i2c bus speed
  leds: leds-ns2: fix locking
  ARM: dove: fix __io() definition to use bus based offset
  dmaengine: fix interrupt clearing for mv_xor
  ARM: kirkwood: Unbreak PCIe I/O port
  ARM: Fix build error when using KCONFIG_CONFIG
  ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasing
  ARM: 6400/1: at91: fix arch_gettimeoffset fallout
  ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM
  ...
This commit is contained in:
Linus Torvalds 2010-09-27 12:32:36 -07:00
commit 6e029fe373
27 changed files with 207 additions and 81 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
arch/arm/Kconfig
View File

@ -271,7 +271,6 @@ config ARCH_AT91
bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
@ -1051,6 +1050,32 @@ config ARM_ERRATA_460075
ACTLR register. Note that setting specific bits in the ACTLR register
may not be available in non-secure mode.
config ARM_ERRATA_742230
bool "ARM errata: DMB operation may be faulty"
depends on CPU_V7 && SMP
help
This option enables the workaround for the 742230 Cortex-A9
(r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
between two write operations may not ensure the correct visibility
ordering of the two writes. This workaround sets a specific bit in
the diagnostic register of the Cortex-A9 which causes the DMB
instruction to behave as a DSB, ensuring the correct behaviour of
the two writes.
config ARM_ERRATA_742231
bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
depends on CPU_V7 && SMP
help
This option enables the workaround for the 742231 Cortex-A9
(r2p0..r2p2) erratum. Under certain conditions, specific to the
Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
accessing some data located in the same cache line, may get corrupted
data due to bad handling of the address hazard when the line gets
replaced from one of the CPUs at the same time as another CPU is
accessing it. This workaround sets specific bits in the diagnostic
register of the Cortex-A9 which reduces the linefill issuing
capabilities of the processor.
config PL310_ERRATA_588369
bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
depends on CACHE_L2X0 && ARCH_OMAP4

2
arch/arm/boot/compressed/Makefile
View File

@ -116,5 +116,5 @@ CFLAGS_font.o := -Dstatic=
$(obj)/font.c: $(FONTC)
$(call cmd,shipped)
$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
@sed "$(SEDFLAGS)" < $< > $@

4
arch/arm/include/asm/pgtable.h
View File

@ -317,6 +317,10 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
#define __HAVE_PHYS_MEM_ACCESS_PROT
struct file;
extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot);
#else
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)

2
arch/arm/kernel/entry-common.S
View File

@ -48,6 +48,8 @@ work_pending:
beq no_work_pending
mov r0, sp @ 'regs'
mov r2, why @ 'syscall'
tst r1, #_TIF_SIGPENDING @ delivering a signal?
movne why, #0 @ prevent further restarts
bl do_notify_resume
b ret_slow_syscall @ Check work again

4
arch/arm/mach-at91/at91sam9g45_devices.c
View File

@ -426,7 +426,7 @@ static struct i2c_gpio_platform_data pdata_i2c0 = {
.sda_is_open_drain = 1,
.scl_pin = AT91_PIN_PA21,
.scl_is_open_drain = 1,
.udelay = 2, /* ~100 kHz */
.udelay = 5, /* ~100 kHz */
};
static struct platform_device at91sam9g45_twi0_device = {
@ -440,7 +440,7 @@ static struct i2c_gpio_platform_data pdata_i2c1 = {
.sda_is_open_drain = 1,
.scl_pin = AT91_PIN_PB11,
.scl_is_open_drain = 1,
.udelay = 2, /* ~100 kHz */
.udelay = 5, /* ~100 kHz */
};
static struct platform_device at91sam9g45_twi1_device = {

3
arch/arm/mach-davinci/dm355.c
View File

@ -769,8 +769,7 @@ static struct map_desc dm355_io_desc[] = {
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00010000),
.length = SZ_32K,
/* MT_MEMORY_NONCACHED requires supersection alignment */
.type = MT_DEVICE,
.type = MT_MEMORY_NONCACHED,
},
};

3
arch/arm/mach-davinci/dm365.c
View File

@ -969,8 +969,7 @@ static struct map_desc dm365_io_desc[] = {
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00010000),
.length = SZ_32K,
/* MT_MEMORY_NONCACHED requires supersection alignment */
.type = MT_DEVICE,
.type = MT_MEMORY_NONCACHED,
},
};

3
arch/arm/mach-davinci/dm644x.c
View File

@ -653,8 +653,7 @@ static struct map_desc dm644x_io_desc[] = {
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00008000),
.length = SZ_16K,
/* MT_MEMORY_NONCACHED requires supersection alignment */
.type = MT_DEVICE,
.type = MT_MEMORY_NONCACHED,
},
};

3
arch/arm/mach-davinci/dm646x.c
View File

@ -737,8 +737,7 @@ static struct map_desc dm646x_io_desc[] = {
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00010000),
.length = SZ_32K,
/* MT_MEMORY_NONCACHED requires supersection alignment */
.type = MT_DEVICE,
.type = MT_MEMORY_NONCACHED,
},
};

6
arch/arm/mach-dove/include/mach/io.h
View File

@ -13,8 +13,8 @@
#define IO_SPACE_LIMIT 0xffffffff
#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
DOVE_PCIE0_IO_VIRT_BASE))
#define __mem_pci(a) (a)
#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \
DOVE_PCIE0_IO_VIRT_BASE))
#define __mem_pci(a) (a)
#endif

2
arch/arm/mach-kirkwood/include/mach/kirkwood.h
View File

@ -38,7 +38,7 @@
#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
#define KIRKWOOD_PCIE1_IO_VIRT_BASE 0xfef00000
#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00000000
#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00100000
#define KIRKWOOD_PCIE1_IO_SIZE SZ_1M
#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000

4
arch/arm/mach-kirkwood/pcie.c
View File

@ -117,7 +117,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp)
* IORESOURCE_IO
*/
pp->res[0].name = "PCIe 0 I/O Space";
pp->res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
pp->res[0].flags = IORESOURCE_IO;
@ -139,7 +139,7 @@ static void __init pcie1_ioresources_init(struct pcie_port *pp)
* IORESOURCE_IO
*/
pp->res[0].name = "PCIe 1 I/O Space";
pp->res[0].start = KIRKWOOD_PCIE1_IO_PHYS_BASE;
pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE;
pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
pp->res[0].flags = IORESOURCE_IO;

7
arch/arm/mach-mmp/include/mach/system.h
View File

@ -9,6 +9,8 @@
#ifndef __ASM_MACH_SYSTEM_H
#define __ASM_MACH_SYSTEM_H
#include <mach/cputype.h>
static inline void arch_idle(void)
{
cpu_do_idle();
@ -16,6 +18,9 @@ static inline void arch_idle(void)
static inline void arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
if (cpu_is_pxa168())
cpu_reset(0xffff0000);
else
cpu_reset(0);
}
#endif /* __ASM_MACH_SYSTEM_H */

3
arch/arm/mach-pxa/cpufreq-pxa2xx.c
View File

@ -312,8 +312,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
freqs.cpu = policy->cpu;
if (freq_debug)
pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
"(SDRAM %d Mhz)\n",
pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
(new_freq_mem / 2000) : (new_freq_mem / 1000));

12
arch/arm/mach-pxa/include/mach/hardware.h
View File

@ -264,23 +264,35 @@
* <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
* == 0x3 for pxa300/pxa310/pxa320
*/
#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
#define __cpu_is_pxa2xx(id) \
({ \
unsigned int _id = (id) >> 13 & 0x7; \
_id <= 0x2; \
})
#else
#define __cpu_is_pxa2xx(id) (0)
#endif
#ifdef CONFIG_PXA3xx
#define __cpu_is_pxa3xx(id) \
({ \
unsigned int _id = (id) >> 13 & 0x7; \
_id == 0x3; \
})
#else
#define __cpu_is_pxa3xx(id) (0)
#endif
#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
#define __cpu_is_pxa93x(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
_id == 0x683 || _id == 0x693; \
})
#else
#define __cpu_is_pxa93x(id) (0)
#endif
#define cpu_is_pxa2xx() \
({ \

6
arch/arm/mach-pxa/palm27x.c
View File

@ -469,9 +469,13 @@ static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
},
};
static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
.use_pio = 1,
};
void __init palm27x_pmic_init(void)
{
i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
pxa27x_set_i2c_power_info(NULL);
pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
}
#endif

1
arch/arm/mach-pxa/vpac270.c
View File

@ -240,6 +240,7 @@ static void __init vpac270_onenand_init(void) {}
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data vpac270_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_power = -1,
.gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N,
.gpio_card_ro = GPIO52_VPAC270_SD_READONLY,
.detect_delay_ms = 200,

3
arch/arm/mach-u300/include/mach/gpio.h
View File

@ -273,6 +273,9 @@ extern void gpio_pullup(unsigned gpio, int value);
extern int gpio_get_value(unsigned gpio);
extern void gpio_set_value(unsigned gpio, int value);
#define gpio_get_value_cansleep gpio_get_value
#define gpio_set_value_cansleep gpio_set_value
/* wrappers to sleep-enable the previous two functions */
static inline unsigned gpio_to_irq(unsigned gpio)
{

8
arch/arm/mach-vexpress/ct-ca9x4.c
View File

@ -227,7 +227,13 @@ static void ct_ca9x4_init(void)
int i;
#ifdef CONFIG_CACHE_L2X0
l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff);
void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC);
/* set RAM latencies to 1 cycle for this core tile. */
writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
#endif
clkdev_add_table(lookups, ARRAY_SIZE(lookups));

19
arch/arm/mm/alignment.c
View File

@ -885,8 +885,23 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
if (ai_usermode & UM_SIGNAL)
force_sig(SIGBUS, current);
else
set_cr(cr_no_alignment);
else {
/*
* We're about to disable the alignment trap and return to
* user space. But if an interrupt occurs before actually
* reaching user space, then the IRQ vector entry code will
* notice that we were still in kernel space and therefore
* the alignment trap won't be re-enabled in that case as it
* is presumed to be always on from kernel space.
* Let's prevent that race by disabling interrupts here (they
* are disabled on the way back to user space anyway in
* entry-common.S) and disable the alignment trap only if
* there is no work pending for this thread.
*/
raw_local_irq_disable();
if (!(current_thread_info()->flags & _TIF_WORK_MASK))
set_cr(cr_no_alignment);
}
return 0;
}

31
arch/arm/mm/mmu.c
View File

@ -15,6 +15,7 @@
#include <linux/nodemask.h>
#include <linux/memblock.h>
#include <linux/sort.h>
#include <linux/fs.h>
#include <asm/cputype.h>
#include <asm/sections.h>
@ -246,6 +247,9 @@ static struct mem_type mem_types[] = {
.domain = DOMAIN_USER,
},
[MT_MEMORY] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_USER | L_PTE_EXEC,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
@ -254,6 +258,9 @@ static struct mem_type mem_types[] = {
.domain = DOMAIN_KERNEL,
},
[MT_MEMORY_NONCACHED] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
@ -411,9 +418,12 @@ static void __init build_mem_type_table(void)
* Enable CPU-specific coherency if supported.
* (Only available on XSC3 at the moment.)
*/
if (arch_is_coherent() && cpu_is_xsc3())
if (arch_is_coherent() && cpu_is_xsc3()) {
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
}
/*
* ARMv6 and above have extended page tables.
*/
@ -438,7 +448,9 @@ static void __init build_mem_type_table(void)
mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
#endif
}
@ -475,6 +487,8 @@ static void __init build_mem_type_table(void)
mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
mem_types[MT_MEMORY].prot_pte |= kern_pgprot;
mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask;
mem_types[MT_ROM].prot_sect |= cp->pmd;
switch (cp->pmd) {
@ -498,6 +512,19 @@ static void __init build_mem_type_table(void)
}
}
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)
{
if (!pfn_valid(pfn))
return pgprot_noncached(vma_prot);
else if (file->f_flags & O_SYNC)
return pgprot_writecombine(vma_prot);
return vma_prot;
}
EXPORT_SYMBOL(phys_mem_access_prot);
#endif
#define vectors_base() (vectors_high() ? 0xffff0000 : 0)
static void __init *early_alloc(unsigned long sz)

62
arch/arm/mm/proc-v7.S
View File

@ -186,13 +186,14 @@ cpu_v7_name:
* It is assumed that:
* - cache type register is implemented
*/
__v7_setup:
__v7_ca9mp_setup:
#ifdef CONFIG_SMP
mrc p15, 0, r0, c1, c0, 1
tst r0, #(1 << 6) @ SMP/nAMP mode enabled?
orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and
mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting
#endif
__v7_setup:
adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
@ -201,11 +202,16 @@ __v7_setup:
mrc p15, 0, r0, c0, c0, 0 @ read main ID register
and r10, r0, #0xff000000 @ ARM?
teq r10, #0x41000000
bne 2f
bne 3f
and r5, r0, #0x00f00000 @ variant
and r6, r0, #0x0000000f @ revision
orr r0, r6, r5, lsr #20-4 @ combine variant and revision
orr r6, r6, r5, lsr #20-4 @ combine variant and revision
ubfx r0, r0, #4, #12 @ primary part number
/* Cortex-A8 Errata */
ldr r10, =0x00000c08 @ Cortex-A8 primary part number
teq r0, r10
bne 2f
#ifdef CONFIG_ARM_ERRATA_430973
teq r5, #0x00100000 @ only present in r1p*
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
@ -213,21 +219,42 @@ __v7_setup:
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_458693
teq r0, #0x20 @ only present in r2p0
teq r6, #0x20 @ only present in r2p0
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
orreq r10, r10, #(1 << 5) @ set L1NEON to 1
orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_460075
teq r0, #0x20 @ only present in r2p0
teq r6, #0x20 @ only present in r2p0
mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
tsteq r10, #1 << 22
orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
#endif
b 3f
2: mov r10, #0
/* Cortex-A9 Errata */
2: ldr r10, =0x00000c09 @ Cortex-A9 primary part number
teq r0, r10
bne 3f
#ifdef CONFIG_ARM_ERRATA_742230
cmp r6, #0x22 @ only present up to r2p2
mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register
orrle r10, r10, #1 << 4 @ set bit #4
mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_742231
teq r6, #0x20 @ present in r2p0
teqne r6, #0x21 @ present in r2p1
teqne r6, #0x22 @ present in r2p2
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 12 @ set bit #12
orreq r10, r10, #1 << 22 @ set bit #22
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
3: mov r10, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
#endif
@ -323,6 +350,29 @@ cpu_elf_name:
.section ".proc.info.init", #alloc, #execinstr
.type __v7_ca9mp_proc_info, #object
__v7_ca9mp_proc_info:
.long 0x410fc090 @ Required ID value
.long 0xff0ffff0 @ Mask for ID
.long PMD_TYPE_SECT | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ | \
PMD_FLAGS
.long PMD_TYPE_SECT | \
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __v7_ca9mp_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
.long cpu_v7_name
.long v7_processor_functions
.long v7wbi_tlb_fns
.long v6_user_fns
.long v7_cache_fns
.size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
/*
* Match any ARMv7 processor core.
*/

33
arch/arm/plat-nomadik/timer.c
View File

@ -1,5 +1,5 @@
/*
* linux/arch/arm/mach-nomadik/timer.c
* linux/arch/arm/plat-nomadik/timer.c
*
* Copyright (C) 2008 STMicroelectronics
* Copyright (C) 2010 Alessandro Rubini
@ -75,7 +75,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
cr = readl(mtu_base + MTU_CR(1));
writel(0, mtu_base + MTU_LR(1));
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
writel(0x2, mtu_base + MTU_IMSC);
writel(1 << 1, mtu_base + MTU_IMSC);
break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
@ -131,25 +131,23 @@ void __init nmdk_timer_init(void)
{
unsigned long rate;
struct clk *clk0;
struct clk *clk1;
u32 cr;
u32 cr = MTU_CRn_32BITS;
clk0 = clk_get_sys("mtu0", NULL);
BUG_ON(IS_ERR(clk0));
clk1 = clk_get_sys("mtu1", NULL);
BUG_ON(IS_ERR(clk1));
clk_enable(clk0);
clk_enable(clk1);
/*
* Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
* use a divide-by-16 counter if it's more than 16MHz
* Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
* for ux500.
* Use a divide-by-16 counter if the tick rate is more than 32MHz.
* At 32 MHz, the timer (with 32 bit counter) can be programmed
* to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
* with 16 gives too low timer resolution.
*/
cr = MTU_CRn_32BITS;;
rate = clk_get_rate(clk0);
if (rate > 16 << 20) {
if (rate > 32000000) {
rate /= 16;
cr |= MTU_CRn_PRESCALE_16;
} else {
@ -170,15 +168,8 @@ void __init nmdk_timer_init(void)
pr_err("timer: failed to initialize clock source %s\n",
nmdk_clksrc.name);
/* Timer 1 is used for events, fix according to rate */
cr = MTU_CRn_32BITS;
rate = clk_get_rate(clk1);
if (rate > 16 << 20) {
rate /= 16;
cr |= MTU_CRn_PRESCALE_16;
} else {
cr |= MTU_CRn_PRESCALE_1;
}
/* Timer 1 is used for events */
clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */

25
arch/arm/plat-omap/sram.c
View File

@ -220,20 +220,7 @@ void __init omap_map_sram(void)
if (omap_sram_size == 0)
return;
if (cpu_is_omap24xx()) {
omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA;
base = OMAP2_SRAM_PA;
base = ROUND_DOWN(base, PAGE_SIZE);
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
}
if (cpu_is_omap34xx()) {
omap_sram_io_desc[0].virtual = OMAP3_SRAM_VA;
base = OMAP3_SRAM_PA;
base = ROUND_DOWN(base, PAGE_SIZE);
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
/*
* SRAM must be marked as non-cached on OMAP3 since the
* CORE DPLL M2 divider change code (in SRAM) runs with the
@ -244,13 +231,11 @@ void __init omap_map_sram(void)
omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
}
if (cpu_is_omap44xx()) {
omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
base = OMAP4_SRAM_PA;
base = ROUND_DOWN(base, PAGE_SIZE);
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
}
omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */
omap_sram_io_desc[0].virtual = omap_sram_base;
base = omap_sram_start;
base = ROUND_DOWN(base, PAGE_SIZE);
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",

2
drivers/dma/mv_xor.c
View File

@ -162,7 +162,7 @@ static int mv_is_err_intr(u32 intr_cause)
static void mv_xor_device_clear_eoc_cause(struct mv_xor_chan *chan)
{
u32 val = (1 << (1 + (chan->idx * 16)));
u32 val = ~(1 << (chan->idx * 16));
dev_dbg(chan->device->common.dev, "%s, val 0x%08x\n", __func__, val);
__raw_writel(val, XOR_INTR_CAUSE(chan));
}

9
drivers/leds/leds-ns2.c
View File

@ -81,7 +81,7 @@ static int ns2_led_get_mode(struct ns2_led_data *led_dat,
int cmd_level;
int slow_level;
read_lock(&led_dat->rw_lock);
read_lock_irq(&led_dat->rw_lock);
cmd_level = gpio_get_value(led_dat->cmd);
slow_level = gpio_get_value(led_dat->slow);
@ -95,7 +95,7 @@ static int ns2_led_get_mode(struct ns2_led_data *led_dat,
}
}
read_unlock(&led_dat->rw_lock);
read_unlock_irq(&led_dat->rw_lock);
return ret;
}
@ -104,8 +104,9 @@ static void ns2_led_set_mode(struct ns2_led_data *led_dat,
enum ns2_led_modes mode)
{
int i;
unsigned long flags;
write_lock(&led_dat->rw_lock);
write_lock_irqsave(&led_dat->rw_lock, flags);
for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
if (mode == ns2_led_modval[i].mode) {
@ -116,7 +117,7 @@ static void ns2_led_set_mode(struct ns2_led_data *led_dat,
}
}
write_unlock(&led_dat->rw_lock);
write_unlock_irqrestore(&led_dat->rw_lock, flags);
}
static void ns2_led_set(struct led_classdev *led_cdev,

4
drivers/video/pxa168fb.c
View File

@ -298,8 +298,8 @@ static void set_dma_control0(struct pxa168fb_info *fbi)
* Set bit to enable graphics DMA.
*/
x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
x |= fbi->active ? 0x00000100 : 0;
fbi->active = 0;
x &= ~CFG_GRA_ENA_MASK;
x |= fbi->active ? CFG_GRA_ENA(1) : CFG_GRA_ENA(0);
/*
* If we are in a pseudo-color mode, we need to enable