KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2

KVM_CAP_DISABLE_QUIRKS is irrevocably broken. The capability does not
advertise the set of quirks which may be disabled to userspace, so it is
impossible to predict the behavior of KVM. Worse yet,
KVM_CAP_DISABLE_QUIRKS will tolerate any value for cap->args[0], meaning
it fails to reject attempts to set invalid quirk bits.

The only valid workaround for the quirky quirks API is to add a new CAP.
Actually advertise the set of quirks that can be disabled to userspace
so it can predict KVM's behavior. Reject values for cap->args[0] that
contain invalid bits.

Finally, add documentation for the new capability and describe the
existing quirks.

Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220301060351.442881-5-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit is contained in:
Oliver Upton 2022-03-01 06:03:47 +00:00 committed by Paolo Bonzini
parent 5e17b2ee45
commit 6d8491910f
4 changed files with 66 additions and 0 deletions

View File

@ -7083,6 +7083,56 @@ resource that is controlled with the H_SET_MODE hypercall.
This capability allows a guest kernel to use a better-performance mode for
handling interrupts and system calls.
7.31 KVM_CAP_DISABLE_QUIRKS2
----------------------------
:Capability: KVM_CAP_DISABLE_QUIRKS2
:Parameters: args[0] - set of KVM quirks to disable
:Architectures: x86
:Type: vm
This capability, if enabled, will cause KVM to disable some behavior
quirks.
Calling KVM_CHECK_EXTENSION for this capability returns a bitmask of
quirks that can be disabled in KVM.
The argument to KVM_ENABLE_CAP for this capability is a bitmask of
quirks to disable, and must be a subset of the bitmask returned by
KVM_CHECK_EXTENSION.
The valid bits in cap.args[0] are:
=================================== ============================================
KVM_X86_QUIRK_LINT0_REENABLED By default, the reset value for the LVT
LINT0 register is 0x700 (APIC_MODE_EXTINT).
When this quirk is disabled, the reset value
is 0x10000 (APIC_LVT_MASKED).
KVM_X86_QUIRK_CD_NW_CLEARED By default, KVM clears CR0.CD and CR0.NW.
When this quirk is disabled, KVM does not
change the value of CR0.CD and CR0.NW.
KVM_X86_QUIRK_LAPIC_MMIO_HOLE By default, the MMIO LAPIC interface is
available even when configured for x2APIC
mode. When this quirk is disabled, KVM
disables the MMIO LAPIC interface if the
LAPIC is in x2APIC mode.
KVM_X86_QUIRK_OUT_7E_INC_RIP By default, KVM pre-increments %rip before
exiting to userspace for an OUT instruction
to port 0x7e. When this quirk is disabled,
KVM does not pre-increment %rip before
exiting to userspace.
KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT When this quirk is disabled, KVM sets
CPUID.01H:ECX[bit 3] (MONITOR/MWAIT) if
IA32_MISC_ENABLE[bit 18] (MWAIT) is set.
Additionally, when this quirk is disabled,
KVM clears CPUID.01H:ECX[bit 3] if
IA32_MISC_ENABLE[bit 18] is cleared.
=================================== ============================================
8. Other capabilities.
======================

View File

@ -1966,4 +1966,11 @@ int memslot_rmap_alloc(struct kvm_memory_slot *slot, unsigned long npages);
#define KVM_CLOCK_VALID_FLAGS \
(KVM_CLOCK_TSC_STABLE | KVM_CLOCK_REALTIME | KVM_CLOCK_HOST_TSC)
#define KVM_X86_VALID_QUIRKS \
(KVM_X86_QUIRK_LINT0_REENABLED | \
KVM_X86_QUIRK_CD_NW_CLEARED | \
KVM_X86_QUIRK_LAPIC_MMIO_HOLE | \
KVM_X86_QUIRK_OUT_7E_INC_RIP | \
KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT)
#endif /* _ASM_X86_KVM_HOST_H */

View File

@ -4363,6 +4363,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
r = enable_pmu ? KVM_CAP_PMU_VALID_MASK : 0;
break;
}
case KVM_CAP_DISABLE_QUIRKS2:
r = KVM_X86_VALID_QUIRKS;
break;
default:
break;
}
@ -5909,6 +5912,11 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm,
return -EINVAL;
switch (cap->cap) {
case KVM_CAP_DISABLE_QUIRKS2:
r = -EINVAL;
if (cap->args[0] & ~KVM_X86_VALID_QUIRKS)
break;
fallthrough;
case KVM_CAP_DISABLE_QUIRKS:
kvm->arch.disabled_quirks = cap->args[0];
r = 0;

View File

@ -1143,6 +1143,7 @@ struct kvm_ppc_resize_hpt {
#define KVM_CAP_PPC_AIL_MODE_3 210
#define KVM_CAP_S390_MEM_OP_EXTENSION 211
#define KVM_CAP_PMU_CAPABILITY 212
#define KVM_CAP_DISABLE_QUIRKS2 213
#ifdef KVM_CAP_IRQ_ROUTING