pinctrl: rockchip: precalculate iomux offsets

An upcoming SoC introduces an interesting quirk to iomux handling making the
calculation of the iomux register-offset harder. To keep the complexity down
when getting/setting the mux, precalculate the actual register offset at
probe-time.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Heiko Stübner 2014-06-16 01:36:33 +02:00 committed by Linus Walleij
parent fc72c923e5
commit 6bc0d121a9

View File

@ -71,9 +71,13 @@ enum rockchip_pinctrl_type {
/**
* @type: iomux variant using IOMUX_* constants
* @offset: if initialized to -1 it will be autocalculated, by specifying
* an initial offset value the relevant source offset can be reset
* to a new value for autocalculating the following iomux registers.
*/
struct rockchip_iomux {
int type;
int offset;
};
/**
@ -119,6 +123,12 @@ struct rockchip_pin_bank {
.bank_num = id, \
.nr_pins = pins, \
.name = label, \
.iomux = { \
{ .offset = -1 }, \
{ .offset = -1 }, \
{ .offset = -1 }, \
{ .offset = -1 }, \
}, \
}
#define PIN_BANK_IOMUX_FLAGS(id, pins, label, iom0, iom1, iom2, iom3) \
@ -127,10 +137,10 @@ struct rockchip_pin_bank {
.nr_pins = pins, \
.name = label, \
.iomux = { \
{ .type = iom0, }, \
{ .type = iom1, }, \
{ .type = iom2, }, \
{ .type = iom3, }, \
{ .type = iom0, .offset = -1 }, \
{ .type = iom1, .offset = -1 }, \
{ .type = iom2, .offset = -1 }, \
{ .type = iom3, .offset = -1 }, \
}, \
}
@ -376,9 +386,7 @@ static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin)
return RK_FUNC_GPIO;
/* get basic quadrupel of mux registers and the correct reg inside */
reg = info->ctrl->mux_offset;
reg += bank->bank_num * 0x10;
reg += iomux_num * 4;
reg = bank->iomux[iomux_num].offset;
bit = (pin % 8) * 2;
ret = regmap_read(info->regmap_base, reg, &val);
@ -427,9 +435,7 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
bank->bank_num, pin, mux);
/* get basic quadrupel of mux registers and the correct reg inside */
reg = info->ctrl->mux_offset;
reg += bank->bank_num * 0x10;
reg += iomux_num * 4;
reg = bank->iomux[iomux_num].offset;
bit = (pin % 8) * 2;
spin_lock_irqsave(&bank->slock, flags);
@ -1515,7 +1521,7 @@ static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data(
struct device_node *np;
struct rockchip_pin_ctrl *ctrl;
struct rockchip_pin_bank *bank;
int i;
int grf_offs, i, j;
match = of_match_node(rockchip_pinctrl_dt_match, node);
ctrl = (struct rockchip_pin_ctrl *)match->data;
@ -1537,12 +1543,40 @@ static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data(
}
}
grf_offs = ctrl->mux_offset;
bank = ctrl->pin_banks;
for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
int bank_pins = 0;
spin_lock_init(&bank->slock);
bank->drvdata = d;
bank->pin_base = ctrl->nr_pins;
ctrl->nr_pins += bank->nr_pins;
/* calculate iomux offsets */
for (j = 0; j < 4; j++) {
struct rockchip_iomux *iom = &bank->iomux[j];
if (bank_pins >= bank->nr_pins)
break;
/* preset offset value, set new start value */
if (iom->offset >= 0) {
grf_offs = iom->offset;
} else { /* set current offset */
iom->offset = grf_offs;
}
dev_dbg(d->dev, "bank %d, iomux %d has offset 0x%x\n",
i, j, iom->offset);
/*
* Increase offset according to iomux width.
*/
grf_offs += 4;
bank_pins += 8;
}
}
return ctrl;