irqchip/stm32: Don't set rising configuration registers at init

The rising configuration status register (rtsr) is not banked.
As it is shared with the co-processor, it should not be written at probe
time, else the co-processor configuration will be lost.

Fixes: f9fc174550 ("irqchip/stm32: Add host and driver data structures")
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This commit is contained in:
Fabien Dessenne 2019-03-07 19:40:36 +01:00 committed by Marc Zyngier
parent 0dda09666f
commit 6a77623d78

View File

@ -716,7 +716,6 @@ stm32_exti_chip_data *stm32_exti_chip_init(struct stm32_exti_host_data *h_data,
const struct stm32_exti_bank *stm32_bank;
struct stm32_exti_chip_data *chip_data;
void __iomem *base = h_data->base;
u32 irqs_mask;
stm32_bank = h_data->drv_data->exti_banks[bank_idx];
chip_data = &h_data->chips_data[bank_idx];
@ -725,10 +724,6 @@ stm32_exti_chip_data *stm32_exti_chip_init(struct stm32_exti_host_data *h_data,
raw_spin_lock_init(&chip_data->rlock);
/* Determine number of irqs supported */
writel_relaxed(~0UL, base + stm32_bank->rtsr_ofst);
irqs_mask = readl_relaxed(base + stm32_bank->rtsr_ofst);
/*
* This IP has no reset, so after hot reboot we should
* clear registers to avoid residue