mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 16:24:13 +08:00
USB: musb: enable low level DMA operation for Blackfin
- DMA registers in Blackfin have different layout - DMA interrupt flags need to be cleared by software Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Bryan Wu
Greg Kroah-Hartman
parent
2c557a4a98
commit
6995eb68aa
@ -34,58 +34,7 @@
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include "musb_core.h"
|
||||
|
||||
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
|
||||
#include "omap2430.h"
|
||||
#endif
|
||||
|
||||
#define MUSB_HSDMA_BASE 0x200
|
||||
#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
|
||||
#define MUSB_HSDMA_CONTROL 0x4
|
||||
#define MUSB_HSDMA_ADDRESS 0x8
|
||||
#define MUSB_HSDMA_COUNT 0xc
|
||||
|
||||
#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \
|
||||
(MUSB_HSDMA_BASE + (_bchannel << 4) + _offset)
|
||||
|
||||
/* control register (16-bit): */
|
||||
#define MUSB_HSDMA_ENABLE_SHIFT 0
|
||||
#define MUSB_HSDMA_TRANSMIT_SHIFT 1
|
||||
#define MUSB_HSDMA_MODE1_SHIFT 2
|
||||
#define MUSB_HSDMA_IRQENABLE_SHIFT 3
|
||||
#define MUSB_HSDMA_ENDPOINT_SHIFT 4
|
||||
#define MUSB_HSDMA_BUSERROR_SHIFT 8
|
||||
#define MUSB_HSDMA_BURSTMODE_SHIFT 9
|
||||
#define MUSB_HSDMA_BURSTMODE (3 << MUSB_HSDMA_BURSTMODE_SHIFT)
|
||||
#define MUSB_HSDMA_BURSTMODE_UNSPEC 0
|
||||
#define MUSB_HSDMA_BURSTMODE_INCR4 1
|
||||
#define MUSB_HSDMA_BURSTMODE_INCR8 2
|
||||
#define MUSB_HSDMA_BURSTMODE_INCR16 3
|
||||
|
||||
#define MUSB_HSDMA_CHANNELS 8
|
||||
|
||||
struct musb_dma_controller;
|
||||
|
||||
struct musb_dma_channel {
|
||||
struct dma_channel channel;
|
||||
struct musb_dma_controller *controller;
|
||||
u32 start_addr;
|
||||
u32 len;
|
||||
u16 max_packet_sz;
|
||||
u8 idx;
|
||||
u8 epnum;
|
||||
u8 transmit;
|
||||
};
|
||||
|
||||
struct musb_dma_controller {
|
||||
struct dma_controller controller;
|
||||
struct musb_dma_channel channel[MUSB_HSDMA_CHANNELS];
|
||||
void *private_data;
|
||||
void __iomem *base;
|
||||
u8 channel_count;
|
||||
u8 used_channels;
|
||||
u8 irq;
|
||||
};
|
||||
#include "musbhsdma.h"
|
||||
|
||||
static int dma_controller_start(struct dma_controller *c)
|
||||
{
|
||||
@ -203,12 +152,8 @@ static void configure_channel(struct dma_channel *channel,
|
||||
: 0);
|
||||
|
||||
/* address/count */
|
||||
musb_writel(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS),
|
||||
dma_addr);
|
||||
musb_writel(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT),
|
||||
len);
|
||||
musb_write_hsdma_addr(mbase, bchannel, dma_addr);
|
||||
musb_write_hsdma_count(mbase, bchannel, len);
|
||||
|
||||
/* control (this should start things) */
|
||||
musb_writew(mbase,
|
||||
@ -279,13 +224,8 @@ static int dma_channel_abort(struct dma_channel *channel)
|
||||
musb_writew(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL),
|
||||
0);
|
||||
musb_writel(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS),
|
||||
0);
|
||||
musb_writel(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT),
|
||||
0);
|
||||
|
||||
musb_write_hsdma_addr(mbase, bchannel, 0);
|
||||
musb_write_hsdma_count(mbase, bchannel, 0);
|
||||
channel->status = MUSB_DMA_STATUS_FREE;
|
||||
}
|
||||
|
||||
@ -333,10 +273,8 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
|
||||
} else {
|
||||
u8 devctl;
|
||||
|
||||
addr = musb_readl(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(
|
||||
bchannel,
|
||||
MUSB_HSDMA_ADDRESS));
|
||||
addr = musb_read_hsdma_addr(mbase,
|
||||
bchannel);
|
||||
channel->actual_len = addr
|
||||
- musb_channel->start_addr;
|
||||
|
||||
@ -375,6 +313,12 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_BLACKFIN
|
||||
/* Clear DMA interrup flags */
|
||||
musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma);
|
||||
#endif
|
||||
|
||||
retval = IRQ_HANDLED;
|
||||
done:
|
||||
spin_unlock_irqrestore(&musb->lock, flags);
|
||||
|
||||
149
drivers/usb/musb/musbhsdma.h
Normal file
149
drivers/usb/musb/musbhsdma.h
Normal file
@ -0,0 +1,149 @@
|
||||
/*
|
||||
* MUSB OTG driver - support for Mentor's DMA controller
|
||||
*
|
||||
* Copyright 2005 Mentor Graphics Corporation
|
||||
* Copyright (C) 2005-2007 by Texas Instruments
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
|
||||
* 02110-1301 USA
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
||||
* NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
||||
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
|
||||
#include "omap2430.h"
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_BLACKFIN
|
||||
|
||||
#define MUSB_HSDMA_BASE 0x200
|
||||
#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
|
||||
#define MUSB_HSDMA_CONTROL 0x4
|
||||
#define MUSB_HSDMA_ADDRESS 0x8
|
||||
#define MUSB_HSDMA_COUNT 0xc
|
||||
|
||||
#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \
|
||||
(MUSB_HSDMA_BASE + (_bchannel << 4) + _offset)
|
||||
|
||||
#define musb_read_hsdma_addr(mbase, bchannel) \
|
||||
musb_readl(mbase, \
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS))
|
||||
|
||||
#define musb_write_hsdma_addr(mbase, bchannel, addr) \
|
||||
musb_writel(mbase, \
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS), \
|
||||
addr)
|
||||
|
||||
#define musb_write_hsdma_count(mbase, bchannel, len) \
|
||||
musb_writel(mbase, \
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \
|
||||
len)
|
||||
#else
|
||||
|
||||
#define MUSB_HSDMA_BASE 0x400
|
||||
#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
|
||||
#define MUSB_HSDMA_CONTROL 0x04
|
||||
#define MUSB_HSDMA_ADDR_LOW 0x08
|
||||
#define MUSB_HSDMA_ADDR_HIGH 0x0C
|
||||
#define MUSB_HSDMA_COUNT_LOW 0x10
|
||||
#define MUSB_HSDMA_COUNT_HIGH 0x14
|
||||
|
||||
#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \
|
||||
(MUSB_HSDMA_BASE + (_bchannel * 0x20) + _offset)
|
||||
|
||||
static inline u32 musb_read_hsdma_addr(void __iomem *mbase, u8 bchannel)
|
||||
{
|
||||
u32 addr = musb_readw(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH));
|
||||
|
||||
addr = addr << 16;
|
||||
|
||||
addr |= musb_readw(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW));
|
||||
|
||||
return addr;
|
||||
}
|
||||
|
||||
static inline void musb_write_hsdma_addr(void __iomem *mbase,
|
||||
u8 bchannel, dma_addr_t dma_addr)
|
||||
{
|
||||
musb_writew(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW),
|
||||
((u16)((u32) dma_addr & 0xFFFF)));
|
||||
musb_writew(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH),
|
||||
((u16)(((u32) dma_addr >> 16) & 0xFFFF)));
|
||||
}
|
||||
|
||||
static inline void musb_write_hsdma_count(void __iomem *mbase,
|
||||
u8 bchannel, u32 len)
|
||||
{
|
||||
musb_writew(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),
|
||||
((u16)((u32) len & 0xFFFF)));
|
||||
musb_writew(mbase,
|
||||
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
|
||||
((u16)(((u32) len >> 16) & 0xFFFF)));
|
||||
}
|
||||
|
||||
#endif /* CONFIG_BLACKFIN */
|
||||
|
||||
/* control register (16-bit): */
|
||||
#define MUSB_HSDMA_ENABLE_SHIFT 0
|
||||
#define MUSB_HSDMA_TRANSMIT_SHIFT 1
|
||||
#define MUSB_HSDMA_MODE1_SHIFT 2
|
||||
#define MUSB_HSDMA_IRQENABLE_SHIFT 3
|
||||
#define MUSB_HSDMA_ENDPOINT_SHIFT 4
|
||||
#define MUSB_HSDMA_BUSERROR_SHIFT 8
|
||||
#define MUSB_HSDMA_BURSTMODE_SHIFT 9
|
||||
#define MUSB_HSDMA_BURSTMODE (3 << MUSB_HSDMA_BURSTMODE_SHIFT)
|
||||
#define MUSB_HSDMA_BURSTMODE_UNSPEC 0
|
||||
#define MUSB_HSDMA_BURSTMODE_INCR4 1
|
||||
#define MUSB_HSDMA_BURSTMODE_INCR8 2
|
||||
#define MUSB_HSDMA_BURSTMODE_INCR16 3
|
||||
|
||||
#define MUSB_HSDMA_CHANNELS 8
|
||||
|
||||
struct musb_dma_controller;
|
||||
|
||||
struct musb_dma_channel {
|
||||
struct dma_channel channel;
|
||||
struct musb_dma_controller *controller;
|
||||
u32 start_addr;
|
||||
u32 len;
|
||||
u16 max_packet_sz;
|
||||
u8 idx;
|
||||
u8 epnum;
|
||||
u8 transmit;
|
||||
};
|
||||
|
||||
struct musb_dma_controller {
|
||||
struct dma_controller controller;
|
||||
struct musb_dma_channel channel[MUSB_HSDMA_CHANNELS];
|
||||
void *private_data;
|
||||
void __iomem *base;
|
||||
u8 channel_count;
|
||||
u8 used_channels;
|
||||
u8 irq;
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user