diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index b2a4f998c180..5de243899de8 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -499,6 +499,8 @@ config NET_SB1000 source "drivers/net/phy/Kconfig" +source "drivers/net/can/Kconfig" + source "drivers/net/mctp/Kconfig" source "drivers/net/mdio/Kconfig" diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index b2dcc1e5a388..806f15146f69 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -1,5 +1,26 @@ # SPDX-License-Identifier: GPL-2.0-only -menu "CAN Device Drivers" + +menuconfig CAN_DEV + tristate "CAN Device Drivers" + default y + depends on CAN + help + Controller Area Network (CAN) is serial communications protocol up to + 1Mbit/s for its original release (now known as Classical CAN) and up + to 8Mbit/s for the more recent CAN with Flexible Data-Rate + (CAN-FD). The CAN bus was originally mainly for automotive, but is now + widely used in marine (NMEA2000), industrial, and medical + applications. More information on the CAN network protocol family + PF_CAN is contained in . + + This section contains all the CAN(-FD) device drivers including the + virtual ones. If you own such devices or plan to use the virtual CAN + interfaces to develop applications, say Y here. + + To compile as a module, choose M here: the module will be called + can-dev. + +if CAN_DEV config CAN_VCAN tristate "Virtual Local CAN Interface (vcan)" @@ -48,15 +69,22 @@ config CAN_SLCAN can be changed by the 'maxdev=xx' module option. This driver can also be built as a module. If so, the module will be called slcan. -config CAN_DEV - tristate "Platform CAN drivers with Netlink support" +config CAN_NETLINK + bool "CAN device drivers with Netlink support" default y help - Enables the common framework for platform CAN drivers with Netlink - support. This is the standard library for CAN drivers. - If unsure, say Y. + Enables the common framework for CAN device drivers. This is the + standard library and provides features for the Netlink interface such + as bittiming validation, support of CAN error states, device restart + and others. -if CAN_DEV + The additional features selected by this option will be added to the + can-dev module. + + This is required by all platform and hardware CAN drivers. If you + plan to use such devices or if unsure, say Y. + +if CAN_NETLINK config CAN_CALC_BITTIMING bool "CAN bit-timing calculation" @@ -69,8 +97,15 @@ config CAN_CALC_BITTIMING source clock frequencies. Disabling saves some space, but then the bit-timing parameters must be specified directly using the Netlink arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw". + + The additional features selected by this option will be added to the + can-dev module. + If unsure, say Y. +config CAN_RX_OFFLOAD + bool + config CAN_AT91 tristate "Atmel AT91 onchip CAN controller" depends on (ARCH_AT91 || COMPILE_TEST) && HAS_IOMEM @@ -82,6 +117,7 @@ config CAN_FLEXCAN tristate "Support for Freescale FLEXCAN based chips" depends on OF || COLDFIRE || COMPILE_TEST depends on HAS_IOMEM + select CAN_RX_OFFLOAD help Say Y here if you want to support for Freescale FlexCAN. @@ -131,6 +167,7 @@ config CAN_SUN4I config CAN_TI_HECC depends on ARM tristate "TI High End CAN Controller" + select CAN_RX_OFFLOAD help Driver for TI HECC (High End CAN Controller) module found on many TI devices. The device specifications are available from www.ti.com @@ -164,7 +201,7 @@ source "drivers/net/can/softing/Kconfig" source "drivers/net/can/spi/Kconfig" source "drivers/net/can/usb/Kconfig" -endif +endif #CAN_NETLINK config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" @@ -174,4 +211,4 @@ config CAN_DEBUG_DEVICES a problem with CAN support and want to see more of what is going on. -endmenu +endif #CAN_DEV diff --git a/drivers/net/can/dev/Makefile b/drivers/net/can/dev/Makefile index af2901db473c..633687d6b6c0 100644 --- a/drivers/net/can/dev/Makefile +++ b/drivers/net/can/dev/Makefile @@ -1,9 +1,12 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_CAN_DEV) += can-dev.o -can-dev-y += bittiming.o -can-dev-y += dev.o -can-dev-y += length.o -can-dev-y += netlink.o -can-dev-y += rx-offload.o -can-dev-y += skb.o +obj-$(CONFIG_CAN_DEV) += can-dev.o + +can-dev-y += skb.o + +can-dev-$(CONFIG_CAN_CALC_BITTIMING) += calc_bittiming.o +can-dev-$(CONFIG_CAN_NETLINK) += bittiming.o +can-dev-$(CONFIG_CAN_NETLINK) += dev.o +can-dev-$(CONFIG_CAN_NETLINK) += length.o +can-dev-$(CONFIG_CAN_NETLINK) += netlink.o +can-dev-$(CONFIG_CAN_RX_OFFLOAD) += rx-offload.o diff --git a/drivers/net/can/dev/bittiming.c b/drivers/net/can/dev/bittiming.c index c1e76f0a5064..7ae80763c960 100644 --- a/drivers/net/can/dev/bittiming.c +++ b/drivers/net/can/dev/bittiming.c @@ -4,205 +4,8 @@ * Copyright (C) 2008-2009 Wolfgang Grandegger */ -#include #include -#ifdef CONFIG_CAN_CALC_BITTIMING -#define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */ - -/* Bit-timing calculation derived from: - * - * Code based on LinCAN sources and H8S2638 project - * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz - * Copyright 2005 Stanislav Marek - * email: pisa@cmp.felk.cvut.cz - * - * Calculates proper bit-timing parameters for a specified bit-rate - * and sample-point, which can then be used to set the bit-timing - * registers of the CAN controller. You can find more information - * in the header file linux/can/netlink.h. - */ -static int -can_update_sample_point(const struct can_bittiming_const *btc, - const unsigned int sample_point_nominal, const unsigned int tseg, - unsigned int *tseg1_ptr, unsigned int *tseg2_ptr, - unsigned int *sample_point_error_ptr) -{ - unsigned int sample_point_error, best_sample_point_error = UINT_MAX; - unsigned int sample_point, best_sample_point = 0; - unsigned int tseg1, tseg2; - int i; - - for (i = 0; i <= 1; i++) { - tseg2 = tseg + CAN_SYNC_SEG - - (sample_point_nominal * (tseg + CAN_SYNC_SEG)) / - 1000 - i; - tseg2 = clamp(tseg2, btc->tseg2_min, btc->tseg2_max); - tseg1 = tseg - tseg2; - if (tseg1 > btc->tseg1_max) { - tseg1 = btc->tseg1_max; - tseg2 = tseg - tseg1; - } - - sample_point = 1000 * (tseg + CAN_SYNC_SEG - tseg2) / - (tseg + CAN_SYNC_SEG); - sample_point_error = abs(sample_point_nominal - sample_point); - - if (sample_point <= sample_point_nominal && - sample_point_error < best_sample_point_error) { - best_sample_point = sample_point; - best_sample_point_error = sample_point_error; - *tseg1_ptr = tseg1; - *tseg2_ptr = tseg2; - } - } - - if (sample_point_error_ptr) - *sample_point_error_ptr = best_sample_point_error; - - return best_sample_point; -} - -int can_calc_bittiming(const struct net_device *dev, struct can_bittiming *bt, - const struct can_bittiming_const *btc) -{ - struct can_priv *priv = netdev_priv(dev); - unsigned int bitrate; /* current bitrate */ - unsigned int bitrate_error; /* difference between current and nominal value */ - unsigned int best_bitrate_error = UINT_MAX; - unsigned int sample_point_error; /* difference between current and nominal value */ - unsigned int best_sample_point_error = UINT_MAX; - unsigned int sample_point_nominal; /* nominal sample point */ - unsigned int best_tseg = 0; /* current best value for tseg */ - unsigned int best_brp = 0; /* current best value for brp */ - unsigned int brp, tsegall, tseg, tseg1 = 0, tseg2 = 0; - u64 v64; - - /* Use CiA recommended sample points */ - if (bt->sample_point) { - sample_point_nominal = bt->sample_point; - } else { - if (bt->bitrate > 800 * KILO /* BPS */) - sample_point_nominal = 750; - else if (bt->bitrate > 500 * KILO /* BPS */) - sample_point_nominal = 800; - else - sample_point_nominal = 875; - } - - /* tseg even = round down, odd = round up */ - for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1; - tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) { - tsegall = CAN_SYNC_SEG + tseg / 2; - - /* Compute all possible tseg choices (tseg=tseg1+tseg2) */ - brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2; - - /* choose brp step which is possible in system */ - brp = (brp / btc->brp_inc) * btc->brp_inc; - if (brp < btc->brp_min || brp > btc->brp_max) - continue; - - bitrate = priv->clock.freq / (brp * tsegall); - bitrate_error = abs(bt->bitrate - bitrate); - - /* tseg brp biterror */ - if (bitrate_error > best_bitrate_error) - continue; - - /* reset sample point error if we have a better bitrate */ - if (bitrate_error < best_bitrate_error) - best_sample_point_error = UINT_MAX; - - can_update_sample_point(btc, sample_point_nominal, tseg / 2, - &tseg1, &tseg2, &sample_point_error); - if (sample_point_error >= best_sample_point_error) - continue; - - best_sample_point_error = sample_point_error; - best_bitrate_error = bitrate_error; - best_tseg = tseg / 2; - best_brp = brp; - - if (bitrate_error == 0 && sample_point_error == 0) - break; - } - - if (best_bitrate_error) { - /* Error in one-tenth of a percent */ - v64 = (u64)best_bitrate_error * 1000; - do_div(v64, bt->bitrate); - bitrate_error = (u32)v64; - if (bitrate_error > CAN_CALC_MAX_ERROR) { - netdev_err(dev, - "bitrate error %d.%d%% too high\n", - bitrate_error / 10, bitrate_error % 10); - return -EDOM; - } - netdev_warn(dev, "bitrate error %d.%d%%\n", - bitrate_error / 10, bitrate_error % 10); - } - - /* real sample point */ - bt->sample_point = can_update_sample_point(btc, sample_point_nominal, - best_tseg, &tseg1, &tseg2, - NULL); - - v64 = (u64)best_brp * 1000 * 1000 * 1000; - do_div(v64, priv->clock.freq); - bt->tq = (u32)v64; - bt->prop_seg = tseg1 / 2; - bt->phase_seg1 = tseg1 - bt->prop_seg; - bt->phase_seg2 = tseg2; - - /* check for sjw user settings */ - if (!bt->sjw || !btc->sjw_max) { - bt->sjw = 1; - } else { - /* bt->sjw is at least 1 -> sanitize upper bound to sjw_max */ - if (bt->sjw > btc->sjw_max) - bt->sjw = btc->sjw_max; - /* bt->sjw must not be higher than tseg2 */ - if (tseg2 < bt->sjw) - bt->sjw = tseg2; - } - - bt->brp = best_brp; - - /* real bitrate */ - bt->bitrate = priv->clock.freq / - (bt->brp * (CAN_SYNC_SEG + tseg1 + tseg2)); - - return 0; -} - -void can_calc_tdco(struct can_tdc *tdc, const struct can_tdc_const *tdc_const, - const struct can_bittiming *dbt, - u32 *ctrlmode, u32 ctrlmode_supported) - -{ - if (!tdc_const || !(ctrlmode_supported & CAN_CTRLMODE_TDC_AUTO)) - return; - - *ctrlmode &= ~CAN_CTRLMODE_TDC_MASK; - - /* As specified in ISO 11898-1 section 11.3.3 "Transmitter - * delay compensation" (TDC) is only applicable if data BRP is - * one or two. - */ - if (dbt->brp == 1 || dbt->brp == 2) { - /* Sample point in clock periods */ - u32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg + - dbt->phase_seg1) * dbt->brp; - - if (sample_point_in_tc < tdc_const->tdco_min) - return; - tdc->tdco = min(sample_point_in_tc, tdc_const->tdco_max); - *ctrlmode |= CAN_CTRLMODE_TDC_AUTO; - } -} -#endif /* CONFIG_CAN_CALC_BITTIMING */ - /* Checks the validity of the specified bit-timing parameters prop_seg, * phase_seg1, phase_seg2 and sjw and tries to determine the bitrate * prescaler value brp. You can find more information in the header diff --git a/drivers/net/can/dev/calc_bittiming.c b/drivers/net/can/dev/calc_bittiming.c new file mode 100644 index 000000000000..d3caa040614d --- /dev/null +++ b/drivers/net/can/dev/calc_bittiming.c @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (C) 2005 Marc Kleine-Budde, Pengutronix + * Copyright (C) 2006 Andrey Volkov, Varma Electronics + * Copyright (C) 2008-2009 Wolfgang Grandegger + */ + +#include +#include + +#define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */ + +/* Bit-timing calculation derived from: + * + * Code based on LinCAN sources and H8S2638 project + * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz + * Copyright 2005 Stanislav Marek + * email: pisa@cmp.felk.cvut.cz + * + * Calculates proper bit-timing parameters for a specified bit-rate + * and sample-point, which can then be used to set the bit-timing + * registers of the CAN controller. You can find more information + * in the header file linux/can/netlink.h. + */ +static int +can_update_sample_point(const struct can_bittiming_const *btc, + const unsigned int sample_point_nominal, const unsigned int tseg, + unsigned int *tseg1_ptr, unsigned int *tseg2_ptr, + unsigned int *sample_point_error_ptr) +{ + unsigned int sample_point_error, best_sample_point_error = UINT_MAX; + unsigned int sample_point, best_sample_point = 0; + unsigned int tseg1, tseg2; + int i; + + for (i = 0; i <= 1; i++) { + tseg2 = tseg + CAN_SYNC_SEG - + (sample_point_nominal * (tseg + CAN_SYNC_SEG)) / + 1000 - i; + tseg2 = clamp(tseg2, btc->tseg2_min, btc->tseg2_max); + tseg1 = tseg - tseg2; + if (tseg1 > btc->tseg1_max) { + tseg1 = btc->tseg1_max; + tseg2 = tseg - tseg1; + } + + sample_point = 1000 * (tseg + CAN_SYNC_SEG - tseg2) / + (tseg + CAN_SYNC_SEG); + sample_point_error = abs(sample_point_nominal - sample_point); + + if (sample_point <= sample_point_nominal && + sample_point_error < best_sample_point_error) { + best_sample_point = sample_point; + best_sample_point_error = sample_point_error; + *tseg1_ptr = tseg1; + *tseg2_ptr = tseg2; + } + } + + if (sample_point_error_ptr) + *sample_point_error_ptr = best_sample_point_error; + + return best_sample_point; +} + +int can_calc_bittiming(const struct net_device *dev, struct can_bittiming *bt, + const struct can_bittiming_const *btc) +{ + struct can_priv *priv = netdev_priv(dev); + unsigned int bitrate; /* current bitrate */ + unsigned int bitrate_error; /* difference between current and nominal value */ + unsigned int best_bitrate_error = UINT_MAX; + unsigned int sample_point_error; /* difference between current and nominal value */ + unsigned int best_sample_point_error = UINT_MAX; + unsigned int sample_point_nominal; /* nominal sample point */ + unsigned int best_tseg = 0; /* current best value for tseg */ + unsigned int best_brp = 0; /* current best value for brp */ + unsigned int brp, tsegall, tseg, tseg1 = 0, tseg2 = 0; + u64 v64; + + /* Use CiA recommended sample points */ + if (bt->sample_point) { + sample_point_nominal = bt->sample_point; + } else { + if (bt->bitrate > 800 * KILO /* BPS */) + sample_point_nominal = 750; + else if (bt->bitrate > 500 * KILO /* BPS */) + sample_point_nominal = 800; + else + sample_point_nominal = 875; + } + + /* tseg even = round down, odd = round up */ + for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1; + tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) { + tsegall = CAN_SYNC_SEG + tseg / 2; + + /* Compute all possible tseg choices (tseg=tseg1+tseg2) */ + brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2; + + /* choose brp step which is possible in system */ + brp = (brp / btc->brp_inc) * btc->brp_inc; + if (brp < btc->brp_min || brp > btc->brp_max) + continue; + + bitrate = priv->clock.freq / (brp * tsegall); + bitrate_error = abs(bt->bitrate - bitrate); + + /* tseg brp biterror */ + if (bitrate_error > best_bitrate_error) + continue; + + /* reset sample point error if we have a better bitrate */ + if (bitrate_error < best_bitrate_error) + best_sample_point_error = UINT_MAX; + + can_update_sample_point(btc, sample_point_nominal, tseg / 2, + &tseg1, &tseg2, &sample_point_error); + if (sample_point_error >= best_sample_point_error) + continue; + + best_sample_point_error = sample_point_error; + best_bitrate_error = bitrate_error; + best_tseg = tseg / 2; + best_brp = brp; + + if (bitrate_error == 0 && sample_point_error == 0) + break; + } + + if (best_bitrate_error) { + /* Error in one-tenth of a percent */ + v64 = (u64)best_bitrate_error * 1000; + do_div(v64, bt->bitrate); + bitrate_error = (u32)v64; + if (bitrate_error > CAN_CALC_MAX_ERROR) { + netdev_err(dev, + "bitrate error %d.%d%% too high\n", + bitrate_error / 10, bitrate_error % 10); + return -EDOM; + } + netdev_warn(dev, "bitrate error %d.%d%%\n", + bitrate_error / 10, bitrate_error % 10); + } + + /* real sample point */ + bt->sample_point = can_update_sample_point(btc, sample_point_nominal, + best_tseg, &tseg1, &tseg2, + NULL); + + v64 = (u64)best_brp * 1000 * 1000 * 1000; + do_div(v64, priv->clock.freq); + bt->tq = (u32)v64; + bt->prop_seg = tseg1 / 2; + bt->phase_seg1 = tseg1 - bt->prop_seg; + bt->phase_seg2 = tseg2; + + /* check for sjw user settings */ + if (!bt->sjw || !btc->sjw_max) { + bt->sjw = 1; + } else { + /* bt->sjw is at least 1 -> sanitize upper bound to sjw_max */ + if (bt->sjw > btc->sjw_max) + bt->sjw = btc->sjw_max; + /* bt->sjw must not be higher than tseg2 */ + if (tseg2 < bt->sjw) + bt->sjw = tseg2; + } + + bt->brp = best_brp; + + /* real bitrate */ + bt->bitrate = priv->clock.freq / + (bt->brp * (CAN_SYNC_SEG + tseg1 + tseg2)); + + return 0; +} + +void can_calc_tdco(struct can_tdc *tdc, const struct can_tdc_const *tdc_const, + const struct can_bittiming *dbt, + u32 *ctrlmode, u32 ctrlmode_supported) + +{ + if (!tdc_const || !(ctrlmode_supported & CAN_CTRLMODE_TDC_AUTO)) + return; + + *ctrlmode &= ~CAN_CTRLMODE_TDC_MASK; + + /* As specified in ISO 11898-1 section 11.3.3 "Transmitter + * delay compensation" (TDC) is only applicable if data BRP is + * one or two. + */ + if (dbt->brp == 1 || dbt->brp == 2) { + /* Sample point in clock periods */ + u32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg + + dbt->phase_seg1) * dbt->brp; + + if (sample_point_in_tc < tdc_const->tdco_min) + return; + tdc->tdco = min(sample_point_in_tc, tdc_const->tdco_max); + *ctrlmode |= CAN_CTRLMODE_TDC_AUTO; + } +} diff --git a/drivers/net/can/dev/dev.c b/drivers/net/can/dev/dev.c index 96c9d9db00cf..523eaacfe29e 100644 --- a/drivers/net/can/dev/dev.c +++ b/drivers/net/can/dev/dev.c @@ -4,7 +4,6 @@ * Copyright (C) 2008-2009 Wolfgang Grandegger */ -#include #include #include #include @@ -17,12 +16,6 @@ #include #include -#define MOD_DESC "CAN device driver interface" - -MODULE_DESCRIPTION(MOD_DESC); -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Wolfgang Grandegger "); - static void can_update_state_error_stats(struct net_device *dev, enum can_state new_state) { @@ -513,7 +506,7 @@ static __init int can_dev_init(void) err = can_netlink_register(); if (!err) - pr_info(MOD_DESC "\n"); + pr_info("CAN device driver interface\n"); return err; } diff --git a/drivers/net/can/dev/skb.c b/drivers/net/can/dev/skb.c index 61660248c69e..8bb62dd864c8 100644 --- a/drivers/net/can/dev/skb.c +++ b/drivers/net/can/dev/skb.c @@ -5,6 +5,14 @@ */ #include +#include +#include + +#define MOD_DESC "CAN device driver interface" + +MODULE_DESCRIPTION(MOD_DESC); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Wolfgang Grandegger "); /* Local echo of CAN messages * @@ -252,3 +260,67 @@ struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf) return skb; } EXPORT_SYMBOL_GPL(alloc_can_err_skb); + +/* Check for outgoing skbs that have not been created by the CAN subsystem */ +static bool can_skb_headroom_valid(struct net_device *dev, struct sk_buff *skb) +{ + /* af_packet creates a headroom of HH_DATA_MOD bytes which is fine */ + if (WARN_ON_ONCE(skb_headroom(skb) < sizeof(struct can_skb_priv))) + return false; + + /* af_packet does not apply CAN skb specific settings */ + if (skb->ip_summed == CHECKSUM_NONE) { + /* init headroom */ + can_skb_prv(skb)->ifindex = dev->ifindex; + can_skb_prv(skb)->skbcnt = 0; + + skb->ip_summed = CHECKSUM_UNNECESSARY; + + /* perform proper loopback on capable devices */ + if (dev->flags & IFF_ECHO) + skb->pkt_type = PACKET_LOOPBACK; + else + skb->pkt_type = PACKET_HOST; + + skb_reset_mac_header(skb); + skb_reset_network_header(skb); + skb_reset_transport_header(skb); + } + + return true; +} + +/* Drop a given socketbuffer if it does not contain a valid CAN frame. */ +bool can_dropped_invalid_skb(struct net_device *dev, struct sk_buff *skb) +{ + const struct canfd_frame *cfd = (struct canfd_frame *)skb->data; + struct can_priv *priv = netdev_priv(dev); + + if (skb->protocol == htons(ETH_P_CAN)) { + if (unlikely(skb->len != CAN_MTU || + cfd->len > CAN_MAX_DLEN)) + goto inval_skb; + } else if (skb->protocol == htons(ETH_P_CANFD)) { + if (unlikely(skb->len != CANFD_MTU || + cfd->len > CANFD_MAX_DLEN)) + goto inval_skb; + } else { + goto inval_skb; + } + + if (!can_skb_headroom_valid(dev, skb)) { + goto inval_skb; + } else if (priv->ctrlmode & CAN_CTRLMODE_LISTENONLY) { + netdev_info_once(dev, + "interface in listen only mode, dropping skb\n"); + goto inval_skb; + } + + return false; + +inval_skb: + kfree_skb(skb); + dev->stats.tx_dropped++; + return true; +} +EXPORT_SYMBOL_GPL(can_dropped_invalid_skb); diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig index 45ad1b3f0cd0..fc2afab36279 100644 --- a/drivers/net/can/m_can/Kconfig +++ b/drivers/net/can/m_can/Kconfig @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig CAN_M_CAN tristate "Bosch M_CAN support" + select CAN_RX_OFFLOAD help Say Y here if you want support for Bosch M_CAN controller framework. This is common support for devices that embed the Bosch M_CAN IP. diff --git a/drivers/net/can/spi/mcp251xfd/Kconfig b/drivers/net/can/spi/mcp251xfd/Kconfig index dd0fc0a54be1..877e4356010d 100644 --- a/drivers/net/can/spi/mcp251xfd/Kconfig +++ b/drivers/net/can/spi/mcp251xfd/Kconfig @@ -2,6 +2,7 @@ config CAN_MCP251XFD tristate "Microchip MCP251xFD SPI CAN controllers" + select CAN_RX_OFFLOAD select REGMAP select WANT_DEV_COREDUMP help diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h index fdb22b00674a..182749e858b3 100644 --- a/include/linux/can/skb.h +++ b/include/linux/can/skb.h @@ -31,6 +31,7 @@ struct sk_buff *alloc_canfd_skb(struct net_device *dev, struct canfd_frame **cfd); struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf); +bool can_dropped_invalid_skb(struct net_device *dev, struct sk_buff *skb); /* * The struct can_skb_priv is used to transport additional information along @@ -96,64 +97,6 @@ static inline struct sk_buff *can_create_echo_skb(struct sk_buff *skb) return nskb; } -/* Check for outgoing skbs that have not been created by the CAN subsystem */ -static inline bool can_skb_headroom_valid(struct net_device *dev, - struct sk_buff *skb) -{ - /* af_packet creates a headroom of HH_DATA_MOD bytes which is fine */ - if (WARN_ON_ONCE(skb_headroom(skb) < sizeof(struct can_skb_priv))) - return false; - - /* af_packet does not apply CAN skb specific settings */ - if (skb->ip_summed == CHECKSUM_NONE) { - /* init headroom */ - can_skb_prv(skb)->ifindex = dev->ifindex; - can_skb_prv(skb)->skbcnt = 0; - - skb->ip_summed = CHECKSUM_UNNECESSARY; - - /* perform proper loopback on capable devices */ - if (dev->flags & IFF_ECHO) - skb->pkt_type = PACKET_LOOPBACK; - else - skb->pkt_type = PACKET_HOST; - - skb_reset_mac_header(skb); - skb_reset_network_header(skb); - skb_reset_transport_header(skb); - } - - return true; -} - -/* Drop a given socketbuffer if it does not contain a valid CAN frame. */ -static inline bool can_dropped_invalid_skb(struct net_device *dev, - struct sk_buff *skb) -{ - const struct canfd_frame *cfd = (struct canfd_frame *)skb->data; - - if (skb->protocol == htons(ETH_P_CAN)) { - if (unlikely(skb->len != CAN_MTU || - cfd->len > CAN_MAX_DLEN)) - goto inval_skb; - } else if (skb->protocol == htons(ETH_P_CANFD)) { - if (unlikely(skb->len != CANFD_MTU || - cfd->len > CANFD_MAX_DLEN)) - goto inval_skb; - } else - goto inval_skb; - - if (!can_skb_headroom_valid(dev, skb)) - goto inval_skb; - - return false; - -inval_skb: - kfree_skb(skb); - dev->stats.tx_dropped++; - return true; -} - static inline bool can_is_canfd_skb(const struct sk_buff *skb) { /* the CAN specific type of skb is identified by its data length */ diff --git a/net/can/Kconfig b/net/can/Kconfig index a9ac5ffab286..cb56be8e3862 100644 --- a/net/can/Kconfig +++ b/net/can/Kconfig @@ -15,7 +15,8 @@ menuconfig CAN PF_CAN is contained in . If you want CAN support you should say Y here and also to the - specific driver for your controller(s) below. + specific driver for your controller(s) under the Network device + support section. if CAN @@ -69,6 +70,4 @@ config CAN_ISOTP If you want to perform automotive vehicle diagnostic services (UDS), say 'y'. -source "drivers/net/can/Kconfig" - endif