korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-18 09:44:18 +08:00
Code Issues Packages Projects Releases Wiki Activity

libertas: support mesh for various firmware versions

Browse Source 
CMD_MESH_CONFIG command ID and a couple of structure members in TxPD,
RxPD have been changed in firmware version 10.x.y.z and newer.

Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Bing Zhao 2009-03-25 09:51:16 -07:00 committed by John W. Linville
parent 5e3af1d2d3
commit 684d6b3602
9 changed files with 114 additions and 48 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
drivers/net/wireless/libertas/cmd.c
View File

@ -119,6 +119,19 @@ int lbs_update_hw_spec(struct lbs_private *priv)
lbs_deb_cmd("GET_HW_SPEC: hardware interface 0x%x, hardware spec 0x%04x\n",
cmd.hwifversion, cmd.version);
/* Determine mesh_fw_ver from fwrelease and fwcapinfo */
/* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */
/* 5.110.22 have mesh command with 0xa3 command id */
/* 10.0.0.p0 FW brings in mesh config command with different id */
/* Check FW version MSB and initialize mesh_fw_ver */
if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5)
priv->mesh_fw_ver = MESH_FW_OLD;
else if ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) &&
(priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK))
priv->mesh_fw_ver = MESH_FW_NEW;
else
priv->mesh_fw_ver = MESH_NONE;
/* Clamp region code to 8-bit since FW spec indicates that it should
* only ever be 8-bit, even though the field size is 16-bit. Some firmware
* returns non-zero high 8 bits here.
@ -1036,17 +1049,26 @@ static int __lbs_mesh_config_send(struct lbs_private *priv,
uint16_t action, uint16_t type)
{
int ret;
u16 command = CMD_MESH_CONFIG_OLD;
lbs_deb_enter(LBS_DEB_CMD);
cmd->hdr.command = cpu_to_le16(CMD_MESH_CONFIG);
/*
* Command id is 0xac for v10 FW along with mesh interface
* id in bits 14-13-12.
*/
if (priv->mesh_fw_ver == MESH_FW_NEW)
command = CMD_MESH_CONFIG |
(MESH_IFACE_ID << MESH_IFACE_BIT_OFFSET);
cmd->hdr.command = cpu_to_le16(command);
cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_mesh_config));
cmd->hdr.result = 0;
cmd->type = cpu_to_le16(type);
cmd->action = cpu_to_le16(action);
ret = lbs_cmd_with_response(priv, CMD_MESH_CONFIG, cmd);
ret = lbs_cmd_with_response(priv, command, cmd);
lbs_deb_leave(LBS_DEB_CMD);
return ret;

21
drivers/net/wireless/libertas/defs.h
View File

@ -227,6 +227,20 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in
#define TxPD_CONTROL_WDS_FRAME (1<<17)
#define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME
/** Mesh interface ID */
#define MESH_IFACE_ID 0x0001
/** Mesh id should be in bits 14-13-12 */
#define MESH_IFACE_BIT_OFFSET 0x000c
/** Mesh enable bit in FW capability */
#define MESH_CAPINFO_ENABLE_MASK (1<<16)
/** FW definition from Marvell v5 */
#define MRVL_FW_V5 (0x05)
/** FW definition from Marvell v10 */
#define MRVL_FW_V10 (0x0a)
/** FW major revision definition */
#define MRVL_FW_MAJOR_REV(x) ((x)>>24)
/** RxPD status */
#define MRVDRV_RXPD_STATUS_OK 0x0001
@ -380,6 +394,13 @@ enum KEY_INFO_WPA {
KEY_INFO_WPA_ENABLED = 0x04
};
/** mesh_fw_ver */
enum _mesh_fw_ver {
MESH_NONE = 0, /* MESH is not supported */
MESH_FW_OLD, /* MESH is supported in FW V5 */
MESH_FW_NEW, /* MESH is supported in FW V10 and newer */
};
/* Default values for fwt commands. */
#define FWT_DEFAULT_METRIC 0
#define FWT_DEFAULT_DIR 1

1
drivers/net/wireless/libertas/dev.h
View File

@ -101,6 +101,7 @@ struct lbs_mesh_stats {
/** Private structure for the MV device */
struct lbs_private {
int mesh_open;
int mesh_fw_ver;
int infra_open;
int mesh_autostart_enabled;

3
drivers/net/wireless/libertas/host.h
View File

@ -83,7 +83,8 @@
#define CMD_FWT_ACCESS 0x0095
#define CMD_802_11_MONITOR_MODE 0x0098
#define CMD_MESH_ACCESS 0x009b
#define CMD_MESH_CONFIG 0x00a3
#define CMD_MESH_CONFIG_OLD 0x00a3
#define CMD_MESH_CONFIG 0x00ac
#define CMD_SET_BOOT2_VER 0x00a5
#define CMD_802_11_BEACON_CTRL 0x00b0

28
drivers/net/wireless/libertas/hostcmd.h
View File

@ -13,8 +13,19 @@
/* TxPD descriptor */
struct txpd {
/* Current Tx packet status */
__le32 tx_status;
/* union to cope up with later FW revisions */
union {
/* Current Tx packet status */
__le32 tx_status;
struct {
/* BSS type: client, AP, etc. */
u8 bss_type;
/* BSS number */
u8 bss_num;
/* Reserved */
__le16 reserved;
} bss;
} u;
/* Tx control */
__le32 tx_control;
__le32 tx_packet_location;
@ -36,8 +47,17 @@ struct txpd {
/* RxPD Descriptor */
struct rxpd {
/* Current Rx packet status */
__le16 status;
/* union to cope up with later FW revisions */
union {
/* Current Rx packet status */
__le16 status;
struct {
/* BSS type: client, AP, etc. */
u8 bss_type;
/* BSS number */
u8 bss_num;
} bss;
} u;
/* SNR */
u8 snr;

40
drivers/net/wireless/libertas/main.c
View File

@ -1307,8 +1307,10 @@ int lbs_start_card(struct lbs_private *priv)
lbs_update_channel(priv);
/* 5.0.16p0 is known to NOT support any mesh */
if (priv->fwrelease > 0x05001000) {
/* Check mesh FW version and appropriately send the mesh start
* command
*/
if (priv->mesh_fw_ver == MESH_FW_OLD) {
/* Enable mesh, if supported, and work out which TLV it uses.
0x100 + 291 is an unofficial value used in 5.110.20.pXX
0x100 + 37 is the official value used in 5.110.21.pXX
@ -1322,27 +1324,35 @@ int lbs_start_card(struct lbs_private *priv)
It's just that 5.110.20.pXX will not have done anything
useful */
priv->mesh_tlv = 0x100 + 291;
priv->mesh_tlv = TLV_TYPE_OLD_MESH_ID;
if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
priv->curbssparams.channel)) {
priv->mesh_tlv = 0x100 + 37;
priv->mesh_tlv = TLV_TYPE_MESH_ID;
if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
priv->curbssparams.channel))
priv->mesh_tlv = 0;
}
if (priv->mesh_tlv) {
lbs_add_mesh(priv);
} else if (priv->mesh_fw_ver == MESH_FW_NEW) {
/* 10.0.0.pXX new firmwares should succeed with TLV
* 0x100+37; Do not invoke command with old TLV.
*/
priv->mesh_tlv = TLV_TYPE_MESH_ID;
if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
priv->curbssparams.channel))
priv->mesh_tlv = 0;
}
if (priv->mesh_tlv) {
lbs_add_mesh(priv);
if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
lbs_pr_err("cannot register lbs_mesh attribute\n");
if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
lbs_pr_err("cannot register lbs_mesh attribute\n");
/* While rtap isn't related to mesh, only mesh-enabled
* firmware implements the rtap functionality via
* CMD_802_11_MONITOR_MODE.
*/
if (device_create_file(&dev->dev, &dev_attr_lbs_rtap))
lbs_pr_err("cannot register lbs_rtap attribute\n");
}
/* While rtap isn't related to mesh, only mesh-enabled
* firmware implements the rtap functionality via
* CMD_802_11_MONITOR_MODE.
*/
if (device_create_file(&dev->dev, &dev_attr_lbs_rtap))
lbs_pr_err("cannot register lbs_rtap attribute\n");
}
lbs_debugfs_init_one(priv, dev);

33
drivers/net/wireless/libertas/rx.c
View File

@ -160,8 +160,15 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
p_rx_pkt = (struct rxpackethdr *) skb->data;
p_rx_pd = &p_rx_pkt->rx_pd;
if (priv->mesh_dev && (p_rx_pd->rx_control & RxPD_MESH_FRAME))
dev = priv->mesh_dev;
if (priv->mesh_dev) {
if (priv->mesh_fw_ver == MESH_FW_OLD) {
if (p_rx_pd->rx_control & RxPD_MESH_FRAME)
dev = priv->mesh_dev;
} else if (priv->mesh_fw_ver == MESH_FW_NEW) {
if (p_rx_pd->u.bss.bss_num == MESH_IFACE_ID)
dev = priv->mesh_dev;
}
}
lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data,
min_t(unsigned int, skb->len, 100));
@ -174,18 +181,6 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
goto done;
}
/*
* Check rxpd status and update 802.3 stat,
*/
if (!(p_rx_pd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) {
lbs_deb_rx("rx err: frame received with bad status\n");
lbs_pr_alert("rxpd not ok\n");
dev->stats.rx_errors++;
ret = 0;
dev_kfree_skb(skb);
goto done;
}
lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n",
skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
@ -334,14 +329,6 @@ static int process_rxed_802_11_packet(struct lbs_private *priv,
goto done;
}
/*
* Check rxpd status and update 802.3 stat,
*/
if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) {
//lbs_deb_rx("rx err: frame received with bad status\n");
dev->stats.rx_errors++;
}
lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n",
skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
@ -353,8 +340,6 @@ static int process_rxed_802_11_packet(struct lbs_private *priv,
radiotap_hdr.hdr.it_pad = 0;
radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr));
radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT);
if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK)))
radiotap_hdr.flags |= IEEE80211_RADIOTAP_F_BADFCS;
radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate);
/* XXX must check no carryout */
radiotap_hdr.antsignal = prxpd->snr + prxpd->nf;

8
drivers/net/wireless/libertas/tx.c
View File

@ -132,8 +132,12 @@ int lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
txpd->tx_packet_length = cpu_to_le16(pkt_len);
txpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd));
if (dev == priv->mesh_dev)
txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME);
if (dev == priv->mesh_dev) {
if (priv->mesh_fw_ver == MESH_FW_OLD)
txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME);
else if (priv->mesh_fw_ver == MESH_FW_NEW)
txpd->u.bss.bss_num = MESH_IFACE_ID;
}
lbs_deb_hex(LBS_DEB_TX, "txpd", (u8 *) &txpd, sizeof(struct txpd));

2
drivers/net/wireless/libertas/types.h
View File

@ -94,6 +94,8 @@ struct ieeetypes_assocrsp {
#define TLV_TYPE_TSFTIMESTAMP (PROPRIETARY_TLV_BASE_ID + 19)
#define TLV_TYPE_RSSI_HIGH (PROPRIETARY_TLV_BASE_ID + 22)
#define TLV_TYPE_SNR_HIGH (PROPRIETARY_TLV_BASE_ID + 23)
#define TLV_TYPE_MESH_ID (PROPRIETARY_TLV_BASE_ID + 37)
#define TLV_TYPE_OLD_MESH_ID (PROPRIETARY_TLV_BASE_ID + 291)
/** TLV related data structures*/
struct mrvlietypesheader {