mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-20 02:34:23 +08:00
dt: bindings: Add bindings for Marvell Xenon SD Host Controller
Marvell Xenon SDHC can support eMMC/SD/SDIO. Add Xenon-specific properties. Also add properties for Xenon PHY setting. Signed-off-by: Hu Ziji <huziji@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Hu Ziji
Ulf Hansson
parent
2f05b6ab5f
commit
66c659cf5c
170
Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
Normal file
170
Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
Normal file
@ -0,0 +1,170 @@
|
||||
Marvell Xenon SDHCI Controller device tree bindings
|
||||
This file documents differences between the core mmc properties
|
||||
described by mmc.txt and the properties used by the Xenon implementation.
|
||||
|
||||
Multiple SDHCs might be put into a single Xenon IP, to save size and cost.
|
||||
Each SDHC is independent and owns independent resources, such as register sets,
|
||||
clock and PHY.
|
||||
Each SDHC should have an independent device tree node.
|
||||
|
||||
Required Properties:
|
||||
- compatible: should be one of the following
|
||||
- "marvell,armada-3700-sdhci": For controllers on Armada-3700 SoC.
|
||||
Must provide a second register area and marvell,pad-type.
|
||||
- "marvell,armada-ap806-sdhci": For controllers on Armada AP806.
|
||||
- "marvell,armada-cp110-sdhci": For controllers on Armada CP110.
|
||||
|
||||
- clocks:
|
||||
Array of clocks required for SDHC.
|
||||
Require at least input clock for Xenon IP core.
|
||||
|
||||
- clock-names:
|
||||
Array of names corresponding to clocks property.
|
||||
The input clock for Xenon IP core should be named as "core".
|
||||
|
||||
- reg:
|
||||
* For "marvell,armada-3700-sdhci", two register areas.
|
||||
The first one for Xenon IP register. The second one for the Armada 3700 SoC
|
||||
PHY PAD Voltage Control register.
|
||||
Please follow the examples with compatible "marvell,armada-3700-sdhci"
|
||||
in below.
|
||||
Please also check property marvell,pad-type in below.
|
||||
|
||||
* For other compatible strings, one register area for Xenon IP.
|
||||
|
||||
Optional Properties:
|
||||
- marvell,xenon-sdhc-id:
|
||||
Indicate the corresponding bit index of current SDHC in
|
||||
SDHC System Operation Control Register Bit[7:0].
|
||||
Set/clear the corresponding bit to enable/disable current SDHC.
|
||||
If Xenon IP contains only one SDHC, this property is optional.
|
||||
|
||||
- marvell,xenon-phy-type:
|
||||
Xenon support multiple types of PHYs.
|
||||
To select eMMC 5.1 PHY, set:
|
||||
marvell,xenon-phy-type = "emmc 5.1 phy"
|
||||
eMMC 5.1 PHY is the default choice if this property is not provided.
|
||||
To select eMMC 5.0 PHY, set:
|
||||
marvell,xenon-phy-type = "emmc 5.0 phy"
|
||||
|
||||
All those types of PHYs can support eMMC, SD and SDIO.
|
||||
Please note that this property only presents the type of PHY.
|
||||
It doesn't stand for the entire SDHC type or property.
|
||||
For example, "emmc 5.1 phy" doesn't mean that this Xenon SDHC only
|
||||
supports eMMC 5.1.
|
||||
|
||||
- marvell,xenon-phy-znr:
|
||||
Set PHY ZNR value.
|
||||
Only available for eMMC PHY.
|
||||
Valid range = [0:0x1F].
|
||||
ZNR is set as 0xF by default if this property is not provided.
|
||||
|
||||
- marvell,xenon-phy-zpr:
|
||||
Set PHY ZPR value.
|
||||
Only available for eMMC PHY.
|
||||
Valid range = [0:0x1F].
|
||||
ZPR is set as 0xF by default if this property is not provided.
|
||||
|
||||
- marvell,xenon-phy-nr-success-tun:
|
||||
Set the number of required consecutive successful sampling points
|
||||
used to identify a valid sampling window, in tuning process.
|
||||
Valid range = [1:7].
|
||||
Set as 0x4 by default if this property is not provided.
|
||||
|
||||
- marvell,xenon-phy-tun-step-divider:
|
||||
Set the divider for calculating TUN_STEP.
|
||||
Set as 64 by default if this property is not provided.
|
||||
|
||||
- marvell,xenon-phy-slow-mode:
|
||||
If this property is selected, transfers will bypass PHY.
|
||||
Only available when bus frequency lower than 55MHz in SDR mode.
|
||||
Disabled by default. Please only try this property if timing issues
|
||||
always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25,
|
||||
SD Default Speed and HS mode and eMMC legacy speed mode.
|
||||
|
||||
- marvell,xenon-tun-count:
|
||||
Xenon SDHC SoC usually doesn't provide re-tuning counter in
|
||||
Capabilities Register 3 Bit[11:8].
|
||||
This property provides the re-tuning counter.
|
||||
If this property is not set, default re-tuning counter will
|
||||
be set as 0x9 in driver.
|
||||
|
||||
- marvell,pad-type:
|
||||
Type of Armada 3700 SoC PHY PAD Voltage Controller register.
|
||||
Only valid when "marvell,armada-3700-sdhci" is selected.
|
||||
Two types: "sd" and "fixed-1-8v".
|
||||
If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning and is
|
||||
switched to 1.8V when later in higher speed mode.
|
||||
If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for eMMC.
|
||||
Please follow the examples with compatible "marvell,armada-3700-sdhci"
|
||||
in below.
|
||||
|
||||
Example:
|
||||
- For eMMC:
|
||||
|
||||
sdhci@aa0000 {
|
||||
compatible = "marvell,armada-ap806-sdhci";
|
||||
reg = <0xaa0000 0x1000>;
|
||||
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
|
||||
clocks = <&emmc_clk>;
|
||||
clock-names = "core";
|
||||
bus-width = <4>;
|
||||
marvell,xenon-phy-slow-mode;
|
||||
marvell,xenon-tun-count = <11>;
|
||||
non-removable;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
|
||||
/* Vmmc and Vqmmc are both fixed */
|
||||
};
|
||||
|
||||
- For SD/SDIO:
|
||||
|
||||
sdhci@ab0000 {
|
||||
compatible = "marvell,armada-cp110-sdhci";
|
||||
reg = <0xab0000 0x1000>;
|
||||
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
|
||||
vqmmc-supply = <&sd_vqmmc_regulator>;
|
||||
vmmc-supply = <&sd_vmmc_regulator>;
|
||||
clocks = <&sdclk>;
|
||||
clock-names = "core";
|
||||
bus-width = <4>;
|
||||
marvell,xenon-tun-count = <9>;
|
||||
};
|
||||
|
||||
- For eMMC with compatible "marvell,armada-3700-sdhci":
|
||||
|
||||
sdhci@aa0000 {
|
||||
compatible = "marvell,armada-3700-sdhci";
|
||||
reg = <0xaa0000 0x1000>,
|
||||
<phy_addr 0x4>;
|
||||
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
|
||||
clocks = <&emmcclk>;
|
||||
clock-names = "core";
|
||||
bus-width = <8>;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
non-removable;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
|
||||
/* Vmmc and Vqmmc are both fixed */
|
||||
|
||||
marvell,pad-type = "fixed-1-8v";
|
||||
};
|
||||
|
||||
- For SD/SDIO with compatible "marvell,armada-3700-sdhci":
|
||||
|
||||
sdhci@ab0000 {
|
||||
compatible = "marvell,armada-3700-sdhci";
|
||||
reg = <0xab0000 0x1000>,
|
||||
<phy_addr 0x4>;
|
||||
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
|
||||
vqmmc-supply = <&sd_regulator>;
|
||||
/* Vmmc is fixed */
|
||||
clocks = <&sdclk>;
|
||||
clock-names = "core";
|
||||
bus-width = <4>;
|
||||
|
||||
marvell,pad-type = "sd";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user