Merge branch 'next-samsung-board' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/board

Documentation/Changes

@@ -2,13 +2,7 @@ Intro
 =====
 
 This document is designed to provide a list of the minimum levels of
-software necessary to run the 2.6 kernels, as well as provide brief
+software necessary to run the 3.0 kernels.
-instructions regarding any other "Gotchas" users may encounter when
-trying life on the Bleeding Edge.  If upgrading from a pre-2.4.x
-kernel, please consult the Changes file included with 2.4.x kernels for
-additional information; most of that information will not be repeated
-here.  Basically, this document assumes that your system is already
-functional and running at least 2.4.x kernels.
 
 This document is originally based on my "Changes" file for 2.0.x kernels
 and therefore owes credit to the same people as that file (Jared Mauch,
@@ -22,11 +16,10 @@ Upgrade to at *least* these software revisions before thinking you've
 encountered a bug!  If you're unsure what version you're currently
 running, the suggested command should tell you.
 
-Again, keep in mind that this list assumes you are already
+Again, keep in mind that this list assumes you are already functionally
-functionally running a Linux 2.4 kernel.  Also, not all tools are
+running a Linux kernel.  Also, not all tools are necessary on all
-necessary on all systems; obviously, if you don't have any ISDN
+systems; obviously, if you don't have any ISDN hardware, for example,
-hardware, for example, you probably needn't concern yourself with
+you probably needn't concern yourself with isdn4k-utils.
-isdn4k-utils.
 
 o  Gnu C                  3.2                     # gcc --version
 o  Gnu make               3.80                    # make --version
@@ -114,12 +107,12 @@ Ksymoops
 
 If the unthinkable happens and your kernel oopses, you may need the
 ksymoops tool to decode it, but in most cases you don't.
-In the 2.6 kernel it is generally preferred to build the kernel with
+It is generally preferred to build the kernel with CONFIG_KALLSYMS so
-CONFIG_KALLSYMS so that it produces readable dumps that can be used as-is
+that it produces readable dumps that can be used as-is (this also
-(this also produces better output than ksymoops).
+produces better output than ksymoops).  If for some reason your kernel
-If for some reason your kernel is not build with CONFIG_KALLSYMS and
+is not build with CONFIG_KALLSYMS and you have no way to rebuild and
-you have no way to rebuild and reproduce the Oops with that option, then
+reproduce the Oops with that option, then you can still decode that Oops
-you can still decode that Oops with ksymoops.
+with ksymoops.
 
 Module-Init-Tools
 -----------------
@@ -261,8 +254,8 @@ needs to be recompiled or (preferably) upgraded.
 NFS-utils
 ---------
 
-In 2.4 and earlier kernels, the nfs server needed to know about any
+In ancient (2.4 and earlier) kernels, the nfs server needed to know
-client that expected to be able to access files via NFS.  This
+about any client that expected to be able to access files via NFS.  This
 information would be given to the kernel by "mountd" when the client
 mounted the filesystem, or by "exportfs" at system startup.  exportfs
 would take information about active clients from /var/lib/nfs/rmtab.
@@ -272,11 +265,11 @@ which is not always easy, particularly when trying to implement
 fail-over.  Even when the system is working well, rmtab suffers from
 getting lots of old entries that never get removed.
 
-With 2.6 we have the option of having the kernel tell mountd when it
+With modern kernels we have the option of having the kernel tell mountd
-gets a request from an unknown host, and mountd can give appropriate
+when it gets a request from an unknown host, and mountd can give
-export information to the kernel.  This removes the dependency on
+appropriate export information to the kernel.  This removes the
-rmtab and means that the kernel only needs to know about currently
+dependency on rmtab and means that the kernel only needs to know about
-active clients.
+currently active clients.
 
 To enable this new functionality, you need to:
 

Documentation/CodingStyle

@@ -680,8 +680,8 @@ ones already enabled by DEBUG.
 		Chapter 14: Allocating memory
 
 The kernel provides the following general purpose memory allocators:
-kmalloc(), kzalloc(), kcalloc(), and vmalloc().  Please refer to the API
+kmalloc(), kzalloc(), kcalloc(), vmalloc(), and vzalloc().  Please refer to
-documentation for further information about them.
+the API documentation for further information about them.
 
 The preferred form for passing a size of a struct is the following:
 

Documentation/cgroups/blkio-controller.txt

@@ -77,7 +77,7 @@ Throttling/Upper Limit policy
 - Specify a bandwidth rate on particular device for root group. The format
   for policy is "<major>:<minor>  <byes_per_second>".
 
-        echo "8:16  1048576" > /sys/fs/cgroup/blkio/blkio.read_bps_device
+        echo "8:16  1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
 
   Above will put a limit of 1MB/second on reads happening for root group
   on device having major/minor number 8:16.
@@ -90,7 +90,7 @@ Throttling/Upper Limit policy
         1024+0 records out
         4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s
 
- Limits for writes can be put using blkio.write_bps_device file.
+ Limits for writes can be put using blkio.throttle.write_bps_device file.
 
 Hierarchical Cgroups
 ====================
@@ -286,28 +286,28 @@ Throttling/Upper limit policy files
 	  specified in bytes per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.read_bps_device
+  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device
 
 - blkio.throttle.write_bps_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
 	  specified in bytes per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.write_bps_device
+  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device
 
 - blkio.throttle.read_iops_device
 	- Specifies upper limit on READ rate from the device. IO rate is
 	  specified in IO per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.read_iops_device
+  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device
 
 - blkio.throttle.write_iops_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
 	  specified in io per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.write_iops_device
+  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device
 
 Note: If both BW and IOPS rules are specified for a device, then IO is
       subjectd to both the constraints.

Documentation/feature-removal-schedule.txt

@@ -583,3 +583,25 @@ Why:	Superseded by the UVCIOC_CTRL_QUERY ioctl.
 Who:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 
 ----------------------------
+
+What:	For VIDIOC_S_FREQUENCY the type field must match the device node's type.
+	If not, return -EINVAL.
+When:	3.2
+Why:	It makes no sense to switch the tuner to radio mode by calling
+	VIDIOC_S_FREQUENCY on a video node, or to switch the tuner to tv mode by
+	calling VIDIOC_S_FREQUENCY on a radio node. This is the first step of a
+	move to more consistent handling of tv and radio tuners.
+Who:	Hans Verkuil <hans.verkuil@cisco.com>
+
+----------------------------
+
+What:	Opening a radio device node will no longer automatically switch the
+	tuner mode from tv to radio.
+When:	3.3
+Why:	Just opening a V4L device should not change the state of the hardware
+	like that. It's very unexpected and against the V4L spec. Instead, you
+	switch to radio mode by calling VIDIOC_S_FREQUENCY. This is the second
+	and last step of the move to consistent handling of tv and radio tuners.
+Who:	Hans Verkuil <hans.verkuil@cisco.com>
+
+----------------------------

Documentation/filesystems/caching/netfs-api.txt

@@ -673,6 +673,22 @@ storage request to complete, or it may attempt to cancel the storage request -
 in which case the page will not be stored in the cache this time.
 
 
+BULK INODE PAGE UNCACHE
+-----------------------
+
+A convenience routine is provided to perform an uncache on all the pages
+attached to an inode.  This assumes that the pages on the inode correspond on a
+1:1 basis with the pages in the cache.
+
+	void fscache_uncache_all_inode_pages(struct fscache_cookie *cookie,
+					     struct inode *inode);
+
+This takes the netfs cookie that the pages were cached with and the inode that
+the pages are attached to.  This function will wait for pages to finish being
+written to the cache and for the cache to finish with the page generally.  No
+error is returned.
+
+
 ==========================
 INDEX AND DATA FILE UPDATE
 ==========================

Documentation/kernel-parameters.txt

@@ -2015,6 +2015,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				the default.
 				off: Turn ECRC off
 				on: Turn ECRC on.
+		realloc		reallocate PCI resources if allocations done by BIOS
+				are erroneous.
 
 	pcie_aspm=	[PCIE] Forcibly enable or disable PCIe Active State Power
 			Management.

Documentation/laptops/thinkpad-acpi.txt

@@ -534,6 +534,8 @@ Events that are never propagated by the driver:
 0x2404		System is waking up from hibernation to undock
 0x2405		System is waking up from hibernation to eject bay
 0x5010		Brightness level changed/control event
+0x6000		KEYBOARD: Numlock key pressed
+0x6005		KEYBOARD: Fn key pressed (TO BE VERIFIED)
 
 Events that are propagated by the driver to userspace:
 
@@ -545,6 +547,8 @@ Events that are propagated by the driver to userspace:
 0x3006		Bay hotplug request (hint to power up SATA link when
 		the optical drive tray is ejected)
 0x4003		Undocked (see 0x2x04), can sleep again
+0x4010		Docked into hotplug port replicator (non-ACPI dock)
+0x4011		Undocked from hotplug port replicator (non-ACPI dock)
 0x500B		Tablet pen inserted into its storage bay
 0x500C		Tablet pen removed from its storage bay
 0x6011		ALARM: battery is too hot
@@ -552,6 +556,7 @@ Events that are propagated by the driver to userspace:
 0x6021		ALARM: a sensor is too hot
 0x6022		ALARM: a sensor is extremely hot
 0x6030		System thermal table changed
+0x6040		Nvidia Optimus/AC adapter related (TO BE VERIFIED)
 
 Battery nearly empty alarms are a last resort attempt to get the
 operating system to hibernate or shutdown cleanly (0x2313), or shutdown

Documentation/spinlocks.txt

@@ -13,18 +13,8 @@ static DEFINE_SPINLOCK(xxx_lock);
 The above is always safe. It will disable interrupts _locally_, but the
 spinlock itself will guarantee the global lock, so it will guarantee that
 there is only one thread-of-control within the region(s) protected by that
-lock. This works well even under UP. The above sequence under UP
+lock. This works well even under UP also, so the code does _not_ need to
-essentially is just the same as doing
+worry about UP vs SMP issues: the spinlocks work correctly under both.
-
-	unsigned long flags;
-
-	save_flags(flags); cli();
-	 ... critical section ...
-	restore_flags(flags);
-
-so the code does _not_ need to worry about UP vs SMP issues: the spinlocks
-work correctly under both (and spinlocks are actually more efficient on
-architectures that allow doing the "save_flags + cli" in one operation).
 
    NOTE! Implications of spin_locks for memory are further described in:
 
@@ -36,27 +26,7 @@ The above is usually pretty simple (you usually need and want only one
 spinlock for most things - using more than one spinlock can make things a
 lot more complex and even slower and is usually worth it only for
 sequences that you _know_ need to be split up: avoid it at all cost if you
-aren't sure). HOWEVER, it _does_ mean that if you have some code that does
+aren't sure).
-
-	cli();
-	.. critical section ..
-	sti();
-
-and another sequence that does
-
-	spin_lock_irqsave(flags);
-	.. critical section ..
-	spin_unlock_irqrestore(flags);
-
-then they are NOT mutually exclusive, and the critical regions can happen
-at the same time on two different CPU's. That's fine per se, but the
-critical regions had better be critical for different things (ie they
-can't stomp on each other).
-
-The above is a problem mainly if you end up mixing code - for example the
-routines in ll_rw_block() tend to use cli/sti to protect the atomicity of
-their actions, and if a driver uses spinlocks instead then you should
-think about issues like the above.
 
 This is really the only really hard part about spinlocks: once you start
 using spinlocks they tend to expand to areas you might not have noticed
@@ -120,11 +90,10 @@ Lesson 3: spinlocks revisited.
 
 The single spin-lock primitives above are by no means the only ones. They
 are the most safe ones, and the ones that work under all circumstances,
-but partly _because_ they are safe they are also fairly slow. They are
+but partly _because_ they are safe they are also fairly slow. They are slower
-much faster than a generic global cli/sti pair, but slower than they'd
+than they'd need to be, because they do have to disable interrupts
-need to be, because they do have to disable interrupts (which is just a
+(which is just a single instruction on a x86, but it's an expensive one -
-single instruction on a x86, but it's an expensive one - and on other
+and on other architectures it can be worse).
-architectures it can be worse).
 
 If you have a case where you have to protect a data structure across
 several CPU's and you want to use spinlocks you can potentially use

MAINTAINERS

@@ -594,6 +594,16 @@ S:	Maintained
 F:	arch/arm/lib/floppydma.S
 F:	arch/arm/include/asm/floppy.h
 
+ARM PMU PROFILING AND DEBUGGING
+M:	Will Deacon <will.deacon@arm.com>
+S:	Maintained
+F:	arch/arm/kernel/perf_event*
+F:	arch/arm/oprofile/common.c
+F:	arch/arm/kernel/pmu.c
+F:	arch/arm/include/asm/pmu.h
+F:	arch/arm/kernel/hw_breakpoint.c
+F:	arch/arm/include/asm/hw_breakpoint.h
+
 ARM PORT
 M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2197,7 +2207,7 @@ F:	drivers/acpi/dock.c
 DOCUMENTATION
 M:	Randy Dunlap <rdunlap@xenotime.net>
 L:	linux-doc@vger.kernel.org
-T:	quilt oss.oracle.com/~rdunlap/kernel-doc-patches/current/
+T:	quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/
 S:	Maintained
 F:	Documentation/
 
@@ -4982,7 +4992,7 @@ F:	drivers/power/power_supply*
 
 PNP SUPPORT
 M:	Adam Belay <abelay@mit.edu>
-M:	Bjorn Helgaas <bjorn.helgaas@hp.com>
+M:	Bjorn Helgaas <bhelgaas@google.com>
 S:	Maintained
 F:	drivers/pnp/
 
@@ -6733,6 +6743,7 @@ F:	fs/fat/
 VIDEOBUF2 FRAMEWORK
 M:	Pawel Osciak <pawel@osciak.com>
 M:	Marek Szyprowski <m.szyprowski@samsung.com>
+M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/video/videobuf2-*

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Sneaky Weasel
 
 # *DOCUMENTATION*

arch/arm/common/dmabounce.c

@@ -255,7 +255,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
 		if (buf == 0) {
 			dev_err(dev, "%s: unable to map unsafe buffer %p!\n",
 			       __func__, ptr);
-			return 0;
+			return ~0;
 		}
 
 		dev_dbg(dev,

arch/arm/kernel/perf_event.c

@@ -583,7 +583,7 @@ static int armpmu_event_init(struct perf_event *event)
 static void armpmu_enable(struct pmu *pmu)
 {
 	/* Enable all of the perf events on hardware. */
-	int idx;
+	int idx, enabled = 0;
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 
 	if (!armpmu)
@@ -596,8 +596,10 @@ static void armpmu_enable(struct pmu *pmu)
 			continue;
 
 		armpmu->enable(&event->hw, idx);
+		enabled = 1;
 	}
 
+	if (enabled)
 		armpmu->start();
 }
 

arch/arm/kernel/setup.c

@@ -73,6 +73,7 @@ __setup("fpe=", fpe_setup);
 #endif
 
 extern void paging_init(struct machine_desc *desc);
+extern void sanity_check_meminfo(void);
 extern void reboot_setup(char *str);
 
 unsigned int processor_id;
@@ -900,6 +901,7 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+	sanity_check_meminfo();
 	arm_memblock_init(&meminfo, mdesc);
 
 	paging_init(mdesc);

arch/arm/kernel/smp_twd.c

@@ -115,7 +115,7 @@ static void __cpuinit twd_calibrate_rate(void)
 		twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
 
 		printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
-			(twd_timer_rate / 1000000) % 100);
+			(twd_timer_rate / 10000) % 100);
 	}
 }
 

arch/arm/mach-ep93xx/core.c

@@ -251,9 +251,9 @@ static void ep93xx_uart_set_mctrl(struct amba_device *dev,
 	unsigned int mcr;
 
 	mcr = 0;
-	if (!(mctrl & TIOCM_RTS))
+	if (mctrl & TIOCM_RTS)
 		mcr |= 2;
-	if (!(mctrl & TIOCM_DTR))
+	if (mctrl & TIOCM_DTR)
 		mcr |= 1;
 
 	__raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);

arch/arm/mach-exynos4/cpu.c

@@ -23,6 +23,7 @@
 #include <plat/sdhci.h>
 #include <plat/devs.h>
 #include <plat/fimc-core.h>
+#include <plat/iic-core.h>
 
 #include <mach/regs-irq.h>
 
@@ -132,6 +133,11 @@ void __init exynos4_map_io(void)
 	s3c_fimc_setname(1, "exynos4-fimc");
 	s3c_fimc_setname(2, "exynos4-fimc");
 	s3c_fimc_setname(3, "exynos4-fimc");
+
+	/* The I2C bus controllers are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+	s3c_i2c2_setname("s3c2440-i2c");
 }
 
 void __init exynos4_init_clocks(int xtal)

arch/arm/mach-exynos4/dev-audio.c

@@ -330,7 +330,7 @@ struct platform_device exynos4_device_ac97 = {
 
 static int exynos4_spdif_cfg_gpio(struct platform_device *pdev)
 {
-	s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(3));
+	s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4));
 
 	return 0;
 }

arch/arm/mach-exynos4/headsmp.S

@@ -13,7 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__INIT
+	__CPUINIT
 
 /*
  * exynos4 specific entry point for secondary CPUs.  This provides

arch/arm/mach-exynos4/mach-smdkv310.c

@@ -78,9 +78,7 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
 };
 
 static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
 	.max_width		= 8,
@@ -96,9 +94,7 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
 };
 
 static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 #ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
 	.max_width		= 8,

arch/arm/mach-omap1/board-ams-delta.c

@@ -215,7 +215,7 @@ static struct omap_kp_platform_data ams_delta_kp_data __initdata = {
 	.delay		= 9,
 };
 
-static struct platform_device ams_delta_kp_device __initdata = {
+static struct platform_device ams_delta_kp_device = {
 	.name		= "omap-keypad",
 	.id		= -1,
 	.dev		= {
@@ -225,12 +225,12 @@ static struct platform_device ams_delta_kp_device __initdata = {
 	.resource	= ams_delta_kp_resources,
 };
 
-static struct platform_device ams_delta_lcd_device __initdata = {
+static struct platform_device ams_delta_lcd_device = {
 	.name	= "lcd_ams_delta",
 	.id	= -1,
 };
 
-static struct platform_device ams_delta_led_device __initdata = {
+static struct platform_device ams_delta_led_device = {
 	.name	= "ams-delta-led",
 	.id	= -1
 };
@@ -267,7 +267,7 @@ static struct soc_camera_link ams_delta_iclink = {
 	.power		= ams_delta_camera_power,
 };
 
-static struct platform_device ams_delta_camera_device __initdata = {
+static struct platform_device ams_delta_camera_device = {
 	.name   = "soc-camera-pdrv",
 	.id     = 0,
 	.dev    = {

arch/arm/mach-omap1/gpio15xx.c

@@ -41,7 +41,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
 	.bank_stride		= 1,
 };
 
-static struct __initdata platform_device omap15xx_mpu_gpio = {
+static struct platform_device omap15xx_mpu_gpio = {
 	.name           = "omap_gpio",
 	.id             = 0,
 	.dev            = {
@@ -70,7 +70,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap15xx_gpio = {
+static struct platform_device omap15xx_gpio = {
 	.name           = "omap_gpio",
 	.id             = 1,
 	.dev            = {

arch/arm/mach-omap1/gpio16xx.c

@@ -44,7 +44,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
 	.bank_stride		= 1,
 };
 
-static struct __initdata platform_device omap16xx_mpu_gpio = {
+static struct platform_device omap16xx_mpu_gpio = {
 	.name           = "omap_gpio",
 	.id             = 0,
 	.dev            = {
@@ -73,7 +73,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio1 = {
+static struct platform_device omap16xx_gpio1 = {
 	.name           = "omap_gpio",
 	.id             = 1,
 	.dev            = {
@@ -102,7 +102,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio2 = {
+static struct platform_device omap16xx_gpio2 = {
 	.name           = "omap_gpio",
 	.id             = 2,
 	.dev            = {
@@ -131,7 +131,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio3 = {
+static struct platform_device omap16xx_gpio3 = {
 	.name           = "omap_gpio",
 	.id             = 3,
 	.dev            = {
@@ -160,7 +160,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio4 = {
+static struct platform_device omap16xx_gpio4 = {
 	.name           = "omap_gpio",
 	.id             = 4,
 	.dev            = {

arch/arm/mach-omap1/gpio7xx.c

@@ -46,7 +46,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
 	.bank_stride		= 2,
 };
 
-static struct __initdata platform_device omap7xx_mpu_gpio = {
+static struct platform_device omap7xx_mpu_gpio = {
 	.name           = "omap_gpio",
 	.id             = 0,
 	.dev            = {
@@ -75,7 +75,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio1 = {
+static struct platform_device omap7xx_gpio1 = {
 	.name           = "omap_gpio",
 	.id             = 1,
 	.dev            = {
@@ -104,7 +104,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio2 = {
+static struct platform_device omap7xx_gpio2 = {
 	.name           = "omap_gpio",
 	.id             = 2,
 	.dev            = {
@@ -133,7 +133,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio3 = {
+static struct platform_device omap7xx_gpio3 = {
 	.name           = "omap_gpio",
 	.id             = 3,
 	.dev            = {
@@ -162,7 +162,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio4 = {
+static struct platform_device omap7xx_gpio4 = {
 	.name           = "omap_gpio",
 	.id             = 4,
 	.dev            = {
@@ -191,7 +191,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio5 = {
+static struct platform_device omap7xx_gpio5 = {
 	.name           = "omap_gpio",
 	.id             = 5,
 	.dev            = {
@@ -220,7 +220,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio6 = {
+static struct platform_device omap7xx_gpio6 = {
 	.name           = "omap_gpio",
 	.id             = 6,
 	.dev            = {

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -661,7 +661,7 @@ static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module =
 	.subdev_board_info = &rx51_si4713_board_info,
 };
 
-static struct platform_device rx51_si4713_dev __initdata_or_module = {
+static struct platform_device rx51_si4713_dev = {
 	.name	= "radio-si4713",
 	.id	= -1,
 	.dev	= {

arch/arm/mach-s3c2440/mach-mini2440.c

@@ -552,7 +552,7 @@ struct mini2440_features_t {
 	struct platform_device *optional[8];
 };
 
-static void mini2440_parse_features(
+static void __init mini2440_parse_features(
 		struct mini2440_features_t * features,
 		const char * features_str )
 {

arch/arm/mach-s3c64xx/Kconfig

@@ -266,3 +266,26 @@ config MACH_SMARTQ7
 	select MACH_SMARTQ
 	help
 	    Machine support for the SmartQ 7
+
+config MACH_WLF_CRAGG_6410
+	bool "Wolfson Cragganmore 6410"
+	select CPU_S3C6410
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_IDE
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_KEYPAD
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_KEYPAD
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_I2C1
+	select S3C_DEV_WDT
+	select S3C_DEV_RTC
+	select S3C64XX_DEV_SPI
+	select S3C24XX_GPIO_EXTRA128
+	help
+	  Machine support for the Wolfson Cragganmore S3C6410 variant.

arch/arm/mach-s3c64xx/Makefile

@@ -59,6 +59,7 @@ obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
 obj-$(CONFIG_MACH_SMARTQ)	+= mach-smartq.o
 obj-$(CONFIG_MACH_SMARTQ5)	+= mach-smartq5.o
 obj-$(CONFIG_MACH_SMARTQ7)	+= mach-smartq7.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o
 
 # device support
 

arch/arm/mach-s3c64xx/dev-spi.c

@@ -88,6 +88,7 @@ static struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
 	.cfg_gpio = s3c64xx_spi_cfg_gpio,
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
+	.tx_st_done = 21,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -132,6 +133,7 @@ static struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
 	.cfg_gpio = s3c64xx_spi_cfg_gpio,
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
+	.tx_st_done = 21,
 };
 
 struct platform_device s3c64xx_device_spi1 = {

arch/arm/mach-s3c64xx/include/mach/irqs.h

@@ -198,7 +198,9 @@
  * interrupt controllers). */
 #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
 
-#ifdef CONFIG_SMDK6410_WM1190_EV1
+#ifdef CONFIG_MACH_WLF_CRAGG_6410
+#define IRQ_BOARD_NR 128
+#elif defined(CONFIG_SMDK6410_WM1190_EV1)
 #define IRQ_BOARD_NR 64
 #elif defined(CONFIG_SMDK6410_WM1192_EV1)
 #define IRQ_BOARD_NR 64

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -0,0 +1,774 @@
+/* linux/arch/arm/mach-s3c64xx/mach-crag6410.c
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *	Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright 2011 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/pwm_backlight.h>
+#include <linux/dm9000.h>
+#include <linux/gpio_keys.h>
+#include <linux/basic_mmio_gpio.h>
+#include <linux/spi/spi.h>
+
+#include <linux/i2c/pca953x.h>
+
+#include <video/platform_lcd.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <mach/s3c6410.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
+
+#include <mach/regs-gpio-memport.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/fb.h>
+#include <plat/sdhci.h>
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <plat/keypad.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/adc.h>
+#include <plat/iic.h>
+#include <plat/pm.h>
+
+#include <sound/wm8915.h>
+#include <sound/wm8962.h>
+#include <sound/wm9081.h>
+
+#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
+#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
+
+#define PCA935X_GPIO_BASE		GPIO_BOARD_START
+#define CODEC_GPIO_BASE		(GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE	(GPIO_BOARD_START + 16)
+
+/* serial port setup */
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+};
+
+static struct platform_pwm_backlight_data crag6410_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 1000,
+	.dft_brightness	= 600,
+	.pwm_period_ns	= 100000,	/* about 1kHz */
+};
+
+static struct platform_device crag6410_backlight_device = {
+	.name		= "pwm-backlight",
+	.id		= -1,
+	.dev		= {
+		.parent	= &s3c_device_timer[0].dev,
+		.platform_data = &crag6410_backlight_data,
+	},
+};
+
+static void crag6410_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
+{
+	pr_debug("%s: setting power %d\n", __func__, power);
+
+	if (power) {
+		gpio_set_value(S3C64XX_GPB(0), 1);
+		msleep(1);
+		s3c_gpio_cfgpin(S3C64XX_GPF(14), S3C_GPIO_SFN(2));
+	} else {
+		gpio_direction_output(S3C64XX_GPF(14), 0);
+		gpio_set_value(S3C64XX_GPB(0), 0);
+	}
+}
+
+static struct platform_device crag6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.id			= -1,
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &(struct plat_lcd_data) {
+		.set_power	= crag6410_lcd_power_set,
+	},
+};
+
+/* 640x480 URT */
+static struct s3c_fb_pd_win crag6410_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.left_margin	= 150,
+		.right_margin	= 80,
+		.upper_margin	= 40,
+		.lower_margin	= 5,
+		.hsync_len	= 40,
+		.vsync_len	= 5,
+		.xres		= 640,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+	.virtual_y	= 480 * 2,
+	.virtual_x	= 640,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &crag6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* 2x6 keypad */
+
+static uint32_t crag6410_keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(0, 0, KEY_VOLUMEUP),
+	KEY(0, 1, KEY_HOME),
+	KEY(0, 2, KEY_VOLUMEDOWN),
+	KEY(0, 3, KEY_HELP),
+	KEY(0, 4, KEY_MENU),
+	KEY(0, 5, KEY_MEDIA),
+	KEY(1, 0, 232),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 2, KEY_LEFT),
+	KEY(1, 3, KEY_UP),
+	KEY(1, 4, KEY_RIGHT),
+	KEY(1, 5, KEY_CAMERA),
+};
+
+static struct matrix_keymap_data crag6410_keymap_data __initdata = {
+	.keymap		= crag6410_keymap,
+	.keymap_size	= ARRAY_SIZE(crag6410_keymap),
+};
+
+static struct samsung_keypad_platdata crag6410_keypad_data __initdata = {
+	.keymap_data	= &crag6410_keymap_data,
+	.rows		= 2,
+	.cols		= 6,
+};
+
+static struct gpio_keys_button crag6410_gpio_keys[] = {
+	[0] = {
+		.code	= KEY_SUSPEND,
+		.gpio	= S3C64XX_GPL(10),	/* EINT 18 */
+		.type	= EV_KEY,
+		.wakeup	= 1,
+		.active_low = 1,
+	},
+	[1] = {
+		.code	= SW_FRONT_PROXIMITY,
+		.gpio	= S3C64XX_GPN(11),	/* EINT 11 */
+		.type	= EV_SW,
+	},
+};
+
+static struct gpio_keys_platform_data crag6410_gpio_keydata = {
+	.buttons	= crag6410_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(crag6410_gpio_keys),
+};
+
+static struct platform_device crag6410_gpio_keydev = {
+	.name		= "gpio-keys",
+	.id		= 0,
+	.dev.platform_data = &crag6410_gpio_keydata,
+};
+
+static struct resource crag6410_dm9k_resource[] = {
+	[0] = {
+		.start	= S3C64XX_PA_XM0CSN5,
+		.end	= S3C64XX_PA_XM0CSN5 + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= S3C64XX_PA_XM0CSN5 + (1 << 8),
+		.end	= S3C64XX_PA_XM0CSN5 + (1 << 8) + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= S3C_EINT(17),
+		.end	= S3C_EINT(17),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct dm9000_plat_data mini6410_dm9k_pdata = {
+	.flags	= DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device crag6410_dm9k_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(crag6410_dm9k_resource),
+	.resource	= crag6410_dm9k_resource,
+	.dev.platform_data = &mini6410_dm9k_pdata,
+};
+
+static struct resource crag6410_mmgpio_resource[] = {
+	[0] = {
+		.start	= S3C64XX_PA_XM0CSN4 + 1,
+		.end	= S3C64XX_PA_XM0CSN4 + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device crag6410_mmgpio = {
+	.name		= "basic-mmio-gpio",
+	.id		= -1,
+	.resource	= crag6410_mmgpio_resource,
+	.num_resources	= ARRAY_SIZE(crag6410_mmgpio_resource),
+	.dev.platform_data = &(struct bgpio_pdata) {
+		.base	= -1,
+	},
+};
+
+static struct platform_device speyside_device = {
+	.name		= "speyside",
+	.id		= -1,
+};
+
+static struct platform_device speyside_wm8962_device = {
+	.name		= "speyside-wm8962",
+	.id		= -1,
+};
+
+static struct regulator_consumer_supply wallvdd_consumers[] = {
+	REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+};
+
+static struct regulator_init_data wallvdd_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(wallvdd_consumers),
+	.consumer_supplies = wallvdd_consumers,
+};
+
+static struct fixed_voltage_config wallvdd_pdata = {
+	.supply_name = "WALLVDD",
+	.microvolts = 5000000,
+	.init_data = &wallvdd_data,
+	.gpio = -EINVAL,
+};
+
+static struct platform_device wallvdd_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= -1,
+	.dev = {
+		.platform_data = &wallvdd_pdata,
+	},
+};
+
+static struct platform_device *crag6410_devices[] __initdata = {
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_fb,
+	&s3c_device_ohci,
+	&s3c_device_usb_hsotg,
+	&s3c_device_adc,
+	&s3c_device_rtc,
+	&s3c_device_ts,
+	&s3c_device_timer[0],
+	&s3c64xx_device_iis0,
+	&s3c64xx_device_iis1,
+	&samsung_asoc_dma,
+	&samsung_device_keypad,
+	&crag6410_gpio_keydev,
+	&crag6410_dm9k_device,
+	&s3c64xx_device_spi0,
+	&crag6410_mmgpio,
+	&crag6410_lcd_powerdev,
+	&crag6410_backlight_device,
+	&speyside_device,
+	&speyside_wm8962_device,
+	&wallvdd_device,
+};
+
+static struct pca953x_platform_data crag6410_pca_data = {
+	.gpio_base	= PCA935X_GPIO_BASE,
+	.irq_base	= 0,
+};
+
+static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
+	REGULATOR_SUPPLY("vddarm", NULL),
+};
+
+static struct regulator_init_data vddarm __initdata = {
+	.constraints = {
+		.name = "VDDARM",
+		.min_uV = 1000000,
+		.max_uV = 1300000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
+	.consumer_supplies = vddarm_consumers,
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddint __initdata = {
+	.constraints = {
+		.name = "VDDINT",
+		.min_uV = 1000000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+};
+
+static struct regulator_init_data vddmem __initdata = {
+	.constraints = {
+		.name = "VDDMEM",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_init_data vddsys __initdata = {
+	.constraints = {
+		.name = "VDDSYS,VDDEXT,VDDPCM,VDDSS",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_consumer_supply vddmmc_consumers[] __initdata = {
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"),
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
+};
+
+static struct regulator_init_data vddmmc __initdata = {
+	.constraints = {
+		.name = "VDDMMC,UH",
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vddmmc_consumers),
+	.consumer_supplies = vddmmc_consumers,
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddotgi __initdata = {
+	.constraints = {
+		.name = "VDDOTGi",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddotg __initdata = {
+	.constraints = {
+		.name = "VDDOTG",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddhi __initdata = {
+	.constraints = {
+		.name = "VDDHI",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddadc __initdata = {
+	.constraints = {
+		.name = "VDDADC,VDDDAC",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddmem0 __initdata = {
+	.constraints = {
+		.name = "VDDMEM0",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddpll __initdata = {
+	.constraints = {
+		.name = "VDDPLL",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddlcd __initdata = {
+	.constraints = {
+		.name = "VDDLCD",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddalive __initdata = {
+	.constraints = {
+		.name = "VDDALIVE",
+		.always_on = 1,
+	},
+	.supply_regulator = "WALLVDD",
+};
+
+static struct wm831x_backup_pdata banff_backup_pdata __initdata = {
+	.charger_enable = 1,
+	.vlim = 2500,  /* mV */
+	.ilim = 200,   /* uA */
+};
+
+static struct wm831x_status_pdata banff_red_led __initdata = {
+	.name = "banff:red:",
+	.default_src = WM831X_STATUS_MANUAL,
+};
+
+static struct wm831x_status_pdata banff_green_led __initdata = {
+	.name = "banff:green:",
+	.default_src = WM831X_STATUS_MANUAL,
+};
+
+static struct wm831x_touch_pdata touch_pdata __initdata = {
+	.data_irq = S3C_EINT(26),
+	.pd_irq = S3C_EINT(27),
+};
+
+static struct wm831x_pdata crag_pmic_pdata __initdata = {
+	.wm831x_num = 1,
+	.irq_base = BANFF_PMIC_IRQ_BASE,
+	.gpio_base = GPIO_BOARD_START + 8,
+
+	.backup = &banff_backup_pdata,
+
+	.gpio_defaults = {
+		/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
+		[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
+		/* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
+		[11] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x7,
+	},
+
+	.dcdc = {
+		&vddarm,  /* DCDC1 */
+		&vddint,  /* DCDC2 */
+		&vddmem,  /* DCDC3 */
+	},
+
+	.ldo = {
+		&vddsys,   /* LDO1 */
+		&vddmmc,   /* LDO2 */
+		NULL,      /* LDO3 */
+		&vddotgi,  /* LDO4 */
+		&vddotg,   /* LDO5 */
+		&vddhi,    /* LDO6 */
+		&vddadc,   /* LDO7 */
+		&vddmem0,  /* LDO8 */
+		&vddpll,   /* LDO9 */
+		&vddlcd,   /* LDO10 */
+		&vddalive, /* LDO11 */
+	},
+
+	.status = {
+		&banff_green_led,
+		&banff_red_led,
+	},
+
+	.touch = &touch_pdata,
+};
+
+static struct i2c_board_info i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+	{ I2C_BOARD_INFO("tca6408", 0x20),
+	  .platform_data = &crag6410_pca_data,
+	},
+	{ I2C_BOARD_INFO("wm8312", 0x34),
+	  .platform_data = &crag_pmic_pdata,
+	  .irq = S3C_EINT(23),
+	},
+};
+
+static struct s3c2410_platform_i2c i2c0_pdata = {
+	.frequency = 400000,
+};
+
+static struct regulator_init_data pvdd_1v2 __initdata = {
+	.constraints = {
+		.name = "PVDD_1V2",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+	REGULATOR_SUPPLY("PLLVDD", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD", "1-001a"),
+	REGULATOR_SUPPLY("CPVDD", "1-001a"),
+	REGULATOR_SUPPLY("AVDD2", "1-001a"),
+	REGULATOR_SUPPLY("DCVDD", "1-001a"),
+	REGULATOR_SUPPLY("AVDD", "1-001a"),
+};
+
+static struct regulator_init_data pvdd_1v8 __initdata = {
+	.constraints = {
+		.name = "PVDD_1V8",
+		.always_on = 1,
+	},
+
+	.consumer_supplies = pvdd_1v8_consumers,
+	.num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers),
+};
+
+static struct regulator_consumer_supply pvdd_3v3_consumers[] __initdata = {
+	REGULATOR_SUPPLY("MICVDD", "1-001a"),
+	REGULATOR_SUPPLY("AVDD1", "1-001a"),
+};
+
+static struct regulator_init_data pvdd_3v3 __initdata = {
+	.constraints = {
+		.name = "PVDD_3V3",
+		.always_on = 1,
+	},
+
+	.consumer_supplies = pvdd_3v3_consumers,
+	.num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers),
+};
+
+static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
+	.wm831x_num = 2,
+	.irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
+	.gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
+
+	.gpio_defaults = {
+		/* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */
+		[0] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+		[1] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+		[2] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+	},
+
+	.dcdc = {
+		&pvdd_1v2,  /* DCDC1 */
+		&pvdd_1v8,  /* DCDC2 */
+		&pvdd_3v3,  /* DCDC3 */
+	},
+
+	.disable_touch = true,
+};
+
+static struct wm8915_retune_mobile_config wm8915_retune[] = {
+	{
+		.name = "Sub LPF",
+		.rate = 48000,
+		.regs = {
+			0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+	{
+		.name = "Sub HPF",
+		.rate = 48000,
+		.regs = {
+			0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+};
+
+static struct wm8915_pdata wm8915_pdata __initdata = {
+	.ldo_ena = S3C64XX_GPN(7),
+	.gpio_base = CODEC_GPIO_BASE,
+	.micdet_def = 1,
+	.inl_mode = WM8915_DIFFERRENTIAL_1,
+	.inr_mode = WM8915_DIFFERRENTIAL_1,
+
+	.irq_flags = IRQF_TRIGGER_RISING,
+
+	.gpio_default = {
+		0x8001, /* GPIO1 == ADCLRCLK1 */
+		0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
+		0x0141, /* GPIO3 == HP_SEL */
+		0x0002, /* GPIO4 == IRQ */
+		0x020e, /* GPIO5 == CLKOUT */
+	},
+
+	.retune_mobile_cfgs = wm8915_retune,
+	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8915_retune),
+};
+
+static struct wm8962_pdata wm8962_pdata __initdata = {
+	.gpio_init = {
+		0,
+		WM8962_GPIO_FN_OPCLK,
+		WM8962_GPIO_FN_DMICCLK,
+		0,
+		0x8000 | WM8962_GPIO_FN_DMICDAT,
+		WM8962_GPIO_FN_IRQ,    /* Open drain mode */
+	},
+	.irq_active_low = true,
+};
+
+static struct wm9081_pdata wm9081_pdata __initdata = {
+	.irq_high = false,
+	.irq_cmos = false,
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("wm8311", 0x34),
+	  .irq = S3C_EINT(0),
+	  .platform_data = &glenfarclas_pmic_pdata },
+
+	{ I2C_BOARD_INFO("wm1250-ev1", 0x27) },
+	{ I2C_BOARD_INFO("wm8915", 0x1a),
+	  .platform_data = &wm8915_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+	{ I2C_BOARD_INFO("wm8962", 0x1a),
+	  .platform_data = &wm8962_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+};
+
+static void __init crag6410_map_io(void)
+{
+	s3c64xx_init_io(NULL, 0);
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
+
+	/* LCD type and Bypass set by bootloader */
+}
+
+static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_PERMANENT,
+};
+
+static struct s3c_sdhci_platdata crag6410_hsmmc1_pdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S3C64XX_GPF(11),
+};
+
+static void crag6410_cfg_sdhci0(struct platform_device *dev, int width)
+{
+	/* Set all the necessary GPG pins to special-function 2 */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
+
+	/* force card-detected for prototype 0 */
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_DOWN);
+}
+
+static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.cfg_gpio		= crag6410_cfg_sdhci0,
+};
+
+static void __init crag6410_machine_init(void)
+{
+	/* Open drain IRQs need pullups */
+	s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP);
+	s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP);
+
+	gpio_request(S3C64XX_GPB(0), "LCD power");
+	gpio_direction_output(S3C64XX_GPB(0), 0);
+
+	gpio_request(S3C64XX_GPF(14), "LCD PWM");
+	gpio_direction_output(S3C64XX_GPF(14), 0);  /* turn off */
+
+	gpio_request(S3C64XX_GPB(1), "SD power");
+	gpio_direction_output(S3C64XX_GPB(1), 0);
+
+	gpio_request(S3C64XX_GPF(10), "nRESETSEL");
+	gpio_direction_output(S3C64XX_GPF(10), 1);
+
+	s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata);
+	s3c_sdhci1_set_platdata(&crag6410_hsmmc1_pdata);
+	s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);
+
+	s3c_i2c0_set_platdata(&i2c0_pdata);
+	s3c_i2c1_set_platdata(NULL);
+	s3c_fb_set_platdata(&crag6410_lcd_pdata);
+
+	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+	samsung_keypad_set_platdata(&crag6410_keypad_data);
+
+	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
+
+	regulator_has_full_constraints();
+
+	s3c_pm_init();
+}
+
+MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
+	/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= crag6410_map_io,
+	.init_machine	= crag6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END

arch/arm/mach-s5p64x0/dev-spi.c

@@ -112,12 +112,14 @@ static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
 	.cfg_gpio	= s5p6440_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x1ff,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 static struct s3c64xx_spi_info s5p6450_spi0_pdata = {
 	.cfg_gpio	= s5p6450_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x1ff,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -160,12 +162,14 @@ static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
 	.cfg_gpio	= s5p6440_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x7f,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 static struct s3c64xx_spi_info s5p6450_spi1_pdata = {
 	.cfg_gpio	= s5p6450_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x7f,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 struct platform_device s5p64x0_device_spi1 = {

arch/arm/mach-s5pc100/dev-spi.c

@@ -15,6 +15,7 @@
 #include <mach/dma.h>
 #include <mach/map.h>
 #include <mach/spi-clocks.h>
+#include <mach/irqs.h>
 
 #include <plat/s3c64xx-spi.h>
 #include <plat/gpio-cfg.h>
@@ -90,6 +91,7 @@ static struct s3c64xx_spi_info s5pc100_spi0_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
 	.high_speed = 1,
+	.tx_st_done = 21,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -134,6 +136,7 @@ static struct s3c64xx_spi_info s5pc100_spi1_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
 	.high_speed = 1,
+	.tx_st_done = 21,
 };
 
 struct platform_device s5pc100_device_spi1 = {
@@ -176,6 +179,7 @@ static struct s3c64xx_spi_info s5pc100_spi2_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
 	.high_speed = 1,
+	.tx_st_done = 21,
 };
 
 struct platform_device s5pc100_device_spi2 = {

arch/arm/mach-s5pv210/dev-spi.c

@@ -85,6 +85,7 @@ static struct s3c64xx_spi_info s5pv210_spi0_pdata = {
 	.fifo_lvl_mask = 0x1ff,
 	.rx_lvl_offset = 15,
 	.high_speed = 1,
+	.tx_st_done = 25,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -129,6 +130,7 @@ static struct s3c64xx_spi_info s5pv210_spi1_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 15,
 	.high_speed = 1,
+	.tx_st_done = 25,
 };
 
 struct platform_device s5pv210_device_spi1 = {

arch/arm/mach-vt8500/irq.c

@@ -39,9 +39,10 @@
 static void __iomem *ic_regbase;
 static void __iomem *sic_regbase;
 
-static void vt8500_irq_mask(unsigned int irq)
+static void vt8500_irq_mask(struct irq_data *d)
 {
 	void __iomem *base = ic_regbase;
+	unsigned irq = d->irq;
 	u8 edge;
 
 	if (irq >= 64) {
@@ -64,9 +65,10 @@ static void vt8500_irq_mask(unsigned int irq)
 	}
 }
 
-static void vt8500_irq_unmask(unsigned int irq)
+static void vt8500_irq_unmask(struct irq_data *d)
 {
 	void __iomem *base = ic_regbase;
+	unsigned irq = d->irq;
 	u8 dctr;
 
 	if (irq >= 64) {
@@ -78,10 +80,11 @@ static void vt8500_irq_unmask(unsigned int irq)
 	writeb(dctr, base + VT8500_IC_DCTR + irq);
 }
 
-static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type)
+static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
 {
 	void __iomem *base = ic_regbase;
-	unsigned int orig_irq = irq;
+	unsigned irq = d->irq;
+	unsigned orig_irq = irq;
 	u8 dctr;
 
 	if (irq >= 64) {
@@ -115,10 +118,10 @@ static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type)
 
 static struct irq_chip vt8500_irq_chip = {
 	.name = "vt8500",
-	.ack       = vt8500_irq_mask,
+	.irq_ack = vt8500_irq_mask,
-	.mask      = vt8500_irq_mask,
+	.irq_mask = vt8500_irq_mask,
-	.unmask    = vt8500_irq_unmask,
+	.irq_unmask = vt8500_irq_unmask,
-	.set_type  = vt8500_irq_set_type,
+	.irq_set_type = vt8500_irq_set_type,
 };
 
 void __init vt8500_init_irq(void)

arch/arm/mm/cache-l2x0.c

@@ -120,17 +120,22 @@ static void l2x0_cache_sync(void)
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
+static void __l2x0_flush_all(void)
+{
+	debug_writel(0x03);
+	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
+	cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
+	cache_sync();
+	debug_writel(0x00);
+}
+
 static void l2x0_flush_all(void)
 {
 	unsigned long flags;
 
 	/* clean all ways */
 	spin_lock_irqsave(&l2x0_lock, flags);
-	debug_writel(0x03);
+	__l2x0_flush_all();
-	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
-	cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
-	cache_sync();
-	debug_writel(0x00);
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
@@ -266,7 +271,9 @@ static void l2x0_disable(void)
 	unsigned long flags;
 
 	spin_lock_irqsave(&l2x0_lock, flags);
-	writel(0, l2x0_base + L2X0_CTRL);
+	__l2x0_flush_all();
+	writel_relaxed(0, l2x0_base + L2X0_CTRL);
+	dsb();
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 

arch/arm/mm/mmu.c

@@ -759,7 +759,7 @@ early_param("vmalloc", early_vmalloc);
 
 static phys_addr_t lowmem_limit __initdata = 0;
 
-static void __init sanity_check_meminfo(void)
+void __init sanity_check_meminfo(void)
 {
 	int i, j, highmem = 0;
 
@@ -1032,8 +1032,9 @@ void __init paging_init(struct machine_desc *mdesc)
 {
 	void *zero_page;
 
+	memblock_set_current_limit(lowmem_limit);
+
 	build_mem_type_table();
-	sanity_check_meminfo();
 	prepare_page_table();
 	map_lowmem();
 	devicemaps_init(mdesc);

arch/arm/mm/nommu.c

@@ -27,6 +27,10 @@ void __init arm_mm_memblock_reserve(void)
 	memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
 }
 
+void __init sanity_check_meminfo(void)
+{
+}
+
 /*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.

arch/arm/plat-s3c24xx/dma.c

@@ -1027,17 +1027,13 @@ int s3c2410_dma_config(unsigned int channel,
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned int dcon;
 
-	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
+	pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit);
-		 __func__, channel, xferunit, dcon);
 
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
-
 	dcon = chan->dcon & dma_sel.dcon_mask;
-
+	pr_debug("%s: dcon is %08x\n", __func__, dcon);
-	pr_debug("%s: New dcon is %08x\n", __func__, dcon);
 
 	switch (chan->req_ch) {
 	case DMACH_I2S_IN:
@@ -1235,7 +1231,7 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp)
 	/* restore channel's hardware configuration */
 
 	if (!cp->in_use)
-		return 0;
+		return;
 
 	printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
 
@@ -1246,8 +1242,6 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp)
 
 	if (cp->map != NULL)
 		dma_sel.select(cp, cp->map);
-
-	return 0;
 }
 
 static void s3c2410_dma_resume(void)

arch/arm/plat-s5p/s5p-time.c

@@ -370,11 +370,11 @@ static void __init s5p_clocksource_init(void)
 
 	clock_rate = clk_get_rate(tin_source);
 
-	init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate);
-
 	s5p_time_setup(timer_source.source_id, TCNT_MAX);
 	s5p_time_start(timer_source.source_id, PERIODIC);
 
+	init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate);
+
 	if (clocksource_register_hz(&time_clocksource, clock_rate))
 		panic("%s: can't register clocksource\n", time_clocksource.name);
 }

arch/arm/plat-samsung/include/plat/devs.h

@@ -12,6 +12,10 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
+
+#ifndef __PLAT_DEVS_H
+#define __PLAT_DEVS_H __FILE__
+
 #include <linux/platform_device.h>
 
 struct s3c24xx_uart_resources {
@@ -159,3 +163,5 @@ extern struct platform_device s3c_device_ac97;
  */
 extern void *s3c_set_platdata(void *pd, size_t pdsize,
 			      struct platform_device *pdev);
+
+#endif /* __PLAT_DEVS_H */

arch/arm/plat-samsung/include/plat/s3c64xx-spi.h

@@ -39,6 +39,7 @@ struct s3c64xx_spi_csinfo {
  * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6
  * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number
  * @high_speed: If the controller supports HIGH_SPEED_EN bit
+ * @tx_st_done: Depends on tx fifo_lvl field
  */
 struct s3c64xx_spi_info {
 	int src_clk_nr;
@@ -53,6 +54,7 @@ struct s3c64xx_spi_info {
 	int fifo_lvl_mask;
 	int rx_lvl_offset;
 	int high_speed;
+	int tx_st_done;
 };
 
 /**

arch/x86/include/asm/mmzone_32.h

@@ -57,6 +57,8 @@ static inline int pfn_valid(int pfn)
 	return 0;
 }
 
+#define early_pfn_valid(pfn)	pfn_valid((pfn))
+
 #endif /* CONFIG_DISCONTIGMEM */
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES

arch/x86/kernel/acpi/realmode/wakeup.S

@@ -28,6 +28,8 @@ pmode_cr3:	.long	0	/* Saved %cr3 */
 pmode_cr4:	.long	0	/* Saved %cr4 */
 pmode_efer:	.quad	0	/* Saved EFER */
 pmode_gdt:	.quad	0
+pmode_misc_en:	.quad	0	/* Saved MISC_ENABLE MSR */
+pmode_behavior:	.long	0	/* Wakeup behavior flags */
 realmode_flags:	.long	0
 real_magic:	.long	0
 trampoline_segment:	.word 0
@@ -91,6 +93,18 @@ wakeup_code:
 	/* Call the C code */
 	calll	main
 
+	/* Restore MISC_ENABLE before entering protected mode, in case
+	   BIOS decided to clear XD_DISABLE during S3. */
+	movl	pmode_behavior, %eax
+	btl	$WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE, %eax
+	jnc	1f
+
+	movl	pmode_misc_en, %eax
+	movl	pmode_misc_en + 4, %edx
+	movl	$MSR_IA32_MISC_ENABLE, %ecx
+	wrmsr
+1:
+
 	/* Do any other stuff... */
 
 #ifndef CONFIG_64BIT

arch/x86/kernel/acpi/realmode/wakeup.h

@@ -21,6 +21,9 @@ struct wakeup_header {
 	u32 pmode_efer_low;	/* Protected mode EFER */
 	u32 pmode_efer_high;
 	u64 pmode_gdt;
+	u32 pmode_misc_en_low;	/* Protected mode MISC_ENABLE */
+	u32 pmode_misc_en_high;
+	u32 pmode_behavior;	/* Wakeup routine behavior flags */
 	u32 realmode_flags;
 	u32 real_magic;
 	u16 trampoline_segment;	/* segment with trampoline code, 64-bit only */
@@ -39,4 +42,7 @@ extern struct wakeup_header wakeup_header;
 #define WAKEUP_HEADER_SIGNATURE 0x51ee1111
 #define WAKEUP_END_SIGNATURE	0x65a22c82
 
+/* Wakeup behavior bits */
+#define WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE     0
+
 #endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */

arch/x86/kernel/acpi/sleep.c

@@ -77,6 +77,12 @@ int acpi_suspend_lowlevel(void)
 
 	header->pmode_cr0 = read_cr0();
 	header->pmode_cr4 = read_cr4_safe();
+	header->pmode_behavior = 0;
+	if (!rdmsr_safe(MSR_IA32_MISC_ENABLE,
+			&header->pmode_misc_en_low,
+			&header->pmode_misc_en_high))
+		header->pmode_behavior |=
+			(1 << WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE);
 	header->realmode_flags = acpi_realmode_flags;
 	header->real_magic = 0x12345678;
 

arch/x86/kernel/reboot.c

@@ -294,6 +294,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"),
 		},
 	},
+	{ /* Handle reboot issue on Acer Aspire one */
+		.callback = set_bios_reboot,
+		.ident = "Acer Aspire One A110",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"),
+		},
+	},
 	{ }
 };
 

arch/x86/oprofile/nmi_int.c

@@ -112,8 +112,10 @@ static void nmi_cpu_start(void *dummy)
 static int nmi_start(void)
 {
 	get_online_cpus();
-	on_each_cpu(nmi_cpu_start, NULL, 1);
 	ctr_running = 1;
+	/* make ctr_running visible to the nmi handler: */
+	smp_mb();
+	on_each_cpu(nmi_cpu_start, NULL, 1);
 	put_online_cpus();
 	return 0;
 }
@@ -504,15 +506,18 @@ static int nmi_setup(void)
 
 	nmi_enabled = 0;
 	ctr_running = 0;
-	barrier();
+	/* make variables visible to the nmi handler: */
+	smp_mb();
 	err = register_die_notifier(&profile_exceptions_nb);
 	if (err)
 		goto fail;
 
 	get_online_cpus();
 	register_cpu_notifier(&oprofile_cpu_nb);
-	on_each_cpu(nmi_cpu_setup, NULL, 1);
 	nmi_enabled = 1;
+	/* make nmi_enabled visible to the nmi handler: */
+	smp_mb();
+	on_each_cpu(nmi_cpu_setup, NULL, 1);
 	put_online_cpus();
 
 	return 0;
@@ -531,7 +536,8 @@ static void nmi_shutdown(void)
 	nmi_enabled = 0;
 	ctr_running = 0;
 	put_online_cpus();
-	barrier();
+	/* make variables visible to the nmi handler: */
+	smp_mb();
 	unregister_die_notifier(&profile_exceptions_nb);
 	msrs = &get_cpu_var(cpu_msrs);
 	model->shutdown(msrs);

arch/x86/pci/xen.c

@@ -327,13 +327,12 @@ int __init pci_xen_hvm_init(void)
 }
 
 #ifdef CONFIG_XEN_DOM0
-static int xen_register_pirq(u32 gsi, int triggering)
+static int xen_register_pirq(u32 gsi, int gsi_override, int triggering)
 {
 	int rc, pirq, irq = -1;
 	struct physdev_map_pirq map_irq;
 	int shareable = 0;
 	char *name;
-	bool gsi_override = false;
 
 	if (!xen_pv_domain())
 		return -1;
@@ -345,31 +344,12 @@ static int xen_register_pirq(u32 gsi, int triggering)
 		shareable = 1;
 		name = "ioapic-level";
 	}
-
 	pirq = xen_allocate_pirq_gsi(gsi);
 	if (pirq < 0)
 		goto out;
 
-	/* Before we bind the GSI to a Linux IRQ, check whether
+	if (gsi_override >= 0)
-	 * we need to override it with bus_irq (IRQ) value. Usually for
+		irq = xen_bind_pirq_gsi_to_irq(gsi_override, pirq, shareable, name);
-	 * IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so:
-	 *  ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
-	 * but there are oddballs where the IRQ != GSI:
-	 *  ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
-	 * which ends up being: gsi_to_irq[9] == 20
-	 * (which is what acpi_gsi_to_irq ends up calling when starting the
-	 * the ACPI interpreter and keels over since IRQ 9 has not been
-	 * setup as we had setup IRQ 20 for it).
-	 */
-	if (gsi == acpi_sci_override_gsi) {
-		/* Check whether the GSI != IRQ */
-		acpi_gsi_to_irq(gsi, &irq);
-		if (irq != gsi)
-			/* Bugger, we MUST have that IRQ. */
-			gsi_override = true;
-	}
-	if (gsi_override)
-		irq = xen_bind_pirq_gsi_to_irq(irq, pirq, shareable, name);
 	else
 		irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name);
 	if (irq < 0)
@@ -392,7 +372,7 @@ out:
 	return irq;
 }
 
-static int xen_register_gsi(u32 gsi, int triggering, int polarity)
+static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity)
 {
 	int rc, irq;
 	struct physdev_setup_gsi setup_gsi;
@@ -403,7 +383,7 @@ static int xen_register_gsi(u32 gsi, int triggering, int polarity)
 	printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
 			gsi, triggering, polarity);
 
-	irq = xen_register_pirq(gsi, triggering);
+	irq = xen_register_pirq(gsi, gsi_override, triggering);
 
 	setup_gsi.gsi = gsi;
 	setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
@@ -425,6 +405,8 @@ static __init void xen_setup_acpi_sci(void)
 	int rc;
 	int trigger, polarity;
 	int gsi = acpi_sci_override_gsi;
+	int irq = -1;
+	int gsi_override = -1;
 
 	if (!gsi)
 		return;
@@ -441,7 +423,25 @@ static __init void xen_setup_acpi_sci(void)
 	printk(KERN_INFO "xen: sci override: global_irq=%d trigger=%d "
 			"polarity=%d\n", gsi, trigger, polarity);
 
-	gsi = xen_register_gsi(gsi, trigger, polarity);
+	/* Before we bind the GSI to a Linux IRQ, check whether
+	 * we need to override it with bus_irq (IRQ) value. Usually for
+	 * IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so:
+	 *  ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
+	 * but there are oddballs where the IRQ != GSI:
+	 *  ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
+	 * which ends up being: gsi_to_irq[9] == 20
+	 * (which is what acpi_gsi_to_irq ends up calling when starting the
+	 * the ACPI interpreter and keels over since IRQ 9 has not been
+	 * setup as we had setup IRQ 20 for it).
+	 */
+	/* Check whether the GSI != IRQ */
+	if (acpi_gsi_to_irq(gsi, &irq) == 0) {
+		if (irq >= 0 && irq != gsi)
+			/* Bugger, we MUST have that IRQ. */
+			gsi_override = irq;
+	}
+
+	gsi = xen_register_gsi(gsi, gsi_override, trigger, polarity);
 	printk(KERN_INFO "xen: acpi sci %d\n", gsi);
 
 	return;
@@ -450,7 +450,7 @@ static __init void xen_setup_acpi_sci(void)
 static int acpi_register_gsi_xen(struct device *dev, u32 gsi,
 				 int trigger, int polarity)
 {
-	return xen_register_gsi(gsi, trigger, polarity);
+	return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity);
 }
 
 static int __init pci_xen_initial_domain(void)
@@ -489,7 +489,7 @@ void __init xen_setup_pirqs(void)
 		if (acpi_get_override_irq(irq, &trigger, &polarity) == -1)
 			continue;
 
-		xen_register_pirq(irq,
+		xen_register_pirq(irq, -1 /* no GSI override */,
 			trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE);
 	}
 }

arch/x86/platform/efi/efi.c

@@ -504,9 +504,6 @@ void __init efi_init(void)
 	x86_platform.set_wallclock = efi_set_rtc_mmss;
 #endif
 
-	/* Setup for EFI runtime service */
-	reboot_type = BOOT_EFI;
-
 #if EFI_DEBUG
 	print_efi_memmap();
 #endif

block/cfq-iosched.c

@@ -2773,11 +2773,14 @@ static void __cfq_exit_single_io_context(struct cfq_data *cfqd,
 	smp_wmb();
 	cic->key = cfqd_dead_key(cfqd);
 
+	rcu_read_lock();
 	if (rcu_dereference(ioc->ioc_data) == cic) {
+		rcu_read_unlock();
 		spin_lock(&ioc->lock);
 		rcu_assign_pointer(ioc->ioc_data, NULL);
 		spin_unlock(&ioc->lock);
-	}
+	} else
+		rcu_read_unlock();
 
 	if (cic->cfqq[BLK_RW_ASYNC]) {
 		cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_ASYNC]);
@@ -3084,7 +3087,8 @@ cfq_drop_dead_cic(struct cfq_data *cfqd, struct io_context *ioc,
 
 	spin_lock_irqsave(&ioc->lock, flags);
 
-	BUG_ON(ioc->ioc_data == cic);
+	BUG_ON(rcu_dereference_check(ioc->ioc_data,
+		lockdep_is_held(&ioc->lock)) == cic);
 
 	radix_tree_delete(&ioc->radix_root, cfqd->cic_index);
 	hlist_del_rcu(&cic->cic_list);

drivers/base/syscore.c

@@ -9,6 +9,7 @@
 #include <linux/syscore_ops.h>
 #include <linux/mutex.h>
 #include <linux/module.h>
+#include <linux/interrupt.h>
 
 static LIST_HEAD(syscore_ops_list);
 static DEFINE_MUTEX(syscore_ops_lock);
@@ -48,6 +49,13 @@ int syscore_suspend(void)
 	struct syscore_ops *ops;
 	int ret = 0;
 
+	pr_debug("Checking wakeup interrupts\n");
+
+	/* Return error code if there are any wakeup interrupts pending. */
+	ret = check_wakeup_irqs();
+	if (ret)
+		return ret;
+
 	WARN_ONCE(!irqs_disabled(),
 		"Interrupts enabled before system core suspend.\n");
 

drivers/block/drbd/drbd_actlog.c

@@ -79,7 +79,7 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev,
 	md_io.error = 0;
 
 	if ((rw & WRITE) && !test_bit(MD_NO_FUA, &mdev->flags))
-		rw |= REQ_FUA;
+		rw |= REQ_FUA | REQ_FLUSH;
 	rw |= REQ_SYNC;
 
 	bio = bio_alloc(GFP_NOIO, 1);

drivers/block/drbd/drbd_bitmap.c

@@ -112,9 +112,6 @@ struct drbd_bitmap {
 	struct task_struct *bm_task;
 };
 
-static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s,
-			       unsigned long e, int val, const enum km_type km);
-
 #define bm_print_lock_info(m) __bm_print_lock_info(m, __func__)
 static void __bm_print_lock_info(struct drbd_conf *mdev, const char *func)
 {
@@ -994,6 +991,9 @@ static void bm_page_io_async(struct bm_aio_ctx *ctx, int page_nr, int rw) __must
 		bio_endio(bio, -EIO);
 	} else {
 		submit_bio(rw, bio);
+		/* this should not count as user activity and cause the
+		 * resync to throttle -- see drbd_rs_should_slow_down(). */
+		atomic_add(len >> 9, &mdev->rs_sect_ev);
 	}
 }
 
@@ -1256,7 +1256,7 @@ unsigned long _drbd_bm_find_next_zero(struct drbd_conf *mdev, unsigned long bm_f
  * expected to be called for only a few bits (e - s about BITS_PER_LONG).
  * Must hold bitmap lock already. */
 static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s,
-	unsigned long e, int val, const enum km_type km)
+	unsigned long e, int val)
 {
 	struct drbd_bitmap *b = mdev->bitmap;
 	unsigned long *p_addr = NULL;
@@ -1274,14 +1274,14 @@ static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s,
 		unsigned int page_nr = bm_bit_to_page_idx(b, bitnr);
 		if (page_nr != last_page_nr) {
 			if (p_addr)
-				__bm_unmap(p_addr, km);
+				__bm_unmap(p_addr, KM_IRQ1);
 			if (c < 0)
 				bm_set_page_lazy_writeout(b->bm_pages[last_page_nr]);
 			else if (c > 0)
 				bm_set_page_need_writeout(b->bm_pages[last_page_nr]);
 			changed_total += c;
 			c = 0;
-			p_addr = __bm_map_pidx(b, page_nr, km);
+			p_addr = __bm_map_pidx(b, page_nr, KM_IRQ1);
 			last_page_nr = page_nr;
 		}
 		if (val)
@@ -1290,7 +1290,7 @@ static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s,
 			c -= (0 != __test_and_clear_bit_le(bitnr & BITS_PER_PAGE_MASK, p_addr));
 	}
 	if (p_addr)
-		__bm_unmap(p_addr, km);
+		__bm_unmap(p_addr, KM_IRQ1);
 	if (c < 0)
 		bm_set_page_lazy_writeout(b->bm_pages[last_page_nr]);
 	else if (c > 0)
@@ -1318,7 +1318,7 @@ static int bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s,
 	if ((val ? BM_DONT_SET : BM_DONT_CLEAR) & b->bm_flags)
 		bm_print_lock_info(mdev);
 
-	c = __bm_change_bits_to(mdev, s, e, val, KM_IRQ1);
+	c = __bm_change_bits_to(mdev, s, e, val);
 
 	spin_unlock_irqrestore(&b->bm_lock, flags);
 	return c;
@@ -1343,16 +1343,17 @@ static inline void bm_set_full_words_within_one_page(struct drbd_bitmap *b,
 {
 	int i;
 	int bits;
-	unsigned long *paddr = kmap_atomic(b->bm_pages[page_nr], KM_USER0);
+	unsigned long *paddr = kmap_atomic(b->bm_pages[page_nr], KM_IRQ1);
 	for (i = first_word; i < last_word; i++) {
 		bits = hweight_long(paddr[i]);
 		paddr[i] = ~0UL;
 		b->bm_set += BITS_PER_LONG - bits;
 	}
-	kunmap_atomic(paddr, KM_USER0);
+	kunmap_atomic(paddr, KM_IRQ1);
 }
 
-/* Same thing as drbd_bm_set_bits, but without taking the spin_lock_irqsave.
+/* Same thing as drbd_bm_set_bits,
+ * but more efficient for a large bit range.
  * You must first drbd_bm_lock().
  * Can be called to set the whole bitmap in one go.
  * Sets bits from s to e _inclusive_. */
@@ -1366,6 +1367,7 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi
 	 * Do not use memset, because we must account for changes,
 	 * so we need to loop over the words with hweight() anyways.
 	 */
+	struct drbd_bitmap *b = mdev->bitmap;
 	unsigned long sl = ALIGN(s,BITS_PER_LONG);
 	unsigned long el = (e+1) & ~((unsigned long)BITS_PER_LONG-1);
 	int first_page;
@@ -1376,15 +1378,19 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi
 
 	if (e - s <= 3*BITS_PER_LONG) {
 		/* don't bother; el and sl may even be wrong. */
-		__bm_change_bits_to(mdev, s, e, 1, KM_USER0);
+		spin_lock_irq(&b->bm_lock);
+		__bm_change_bits_to(mdev, s, e, 1);
+		spin_unlock_irq(&b->bm_lock);
 		return;
 	}
 
 	/* difference is large enough that we can trust sl and el */
 
+	spin_lock_irq(&b->bm_lock);
+
 	/* bits filling the current long */
 	if (sl)
-		__bm_change_bits_to(mdev, s, sl-1, 1, KM_USER0);
+		__bm_change_bits_to(mdev, s, sl-1, 1);
 
 	first_page = sl >> (3 + PAGE_SHIFT);
 	last_page = el >> (3 + PAGE_SHIFT);
@@ -1397,8 +1403,10 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi
 	/* first and full pages, unless first page == last page */
 	for (page_nr = first_page; page_nr < last_page; page_nr++) {
 		bm_set_full_words_within_one_page(mdev->bitmap, page_nr, first_word, last_word);
+		spin_unlock_irq(&b->bm_lock);
 		cond_resched();
 		first_word = 0;
+		spin_lock_irq(&b->bm_lock);
 	}
 
 	/* last page (respectively only page, for first page == last page) */
@@ -1411,7 +1419,8 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi
 	 * it would trigger an assert in __bm_change_bits_to()
 	 */
 	if (el <= e)
-		__bm_change_bits_to(mdev, el, e, 1, KM_USER0);
+		__bm_change_bits_to(mdev, el, e, 1);
+	spin_unlock_irq(&b->bm_lock);
 }
 
 /* returns bit state

drivers/block/drbd/drbd_receiver.c

@@ -4602,6 +4602,11 @@ int drbd_asender(struct drbd_thread *thi)
 			dev_err(DEV, "meta connection shut down by peer.\n");
 			goto reconnect;
 		} else if (rv == -EAGAIN) {
+			/* If the data socket received something meanwhile,
+			 * that is good enough: peer is still alive. */
+			if (time_after(mdev->last_received,
+				jiffies - mdev->meta.socket->sk->sk_rcvtimeo))
+				continue;
 			if (ping_timeout_active) {
 				dev_err(DEV, "PingAck did not arrive in time.\n");
 				goto reconnect;
@@ -4637,6 +4642,7 @@ int drbd_asender(struct drbd_thread *thi)
 				goto reconnect;
 		}
 		if (received == expect) {
+			mdev->last_received = jiffies;
 			D_ASSERT(cmd != NULL);
 			if (!cmd->process(mdev, h))
 				goto reconnect;

drivers/block/drbd/drbd_worker.c

@@ -536,12 +536,7 @@ static int w_make_resync_request(struct drbd_conf *mdev,
 		return 1;
 	}
 
-	/* starting with drbd 8.3.8, we can handle multi-bio EEs,
+	max_bio_size = queue_max_hw_sectors(mdev->rq_queue) << 9;
-	 * if it should be necessary */
-	max_bio_size =
-		mdev->agreed_pro_version < 94 ? queue_max_hw_sectors(mdev->rq_queue) << 9 :
-		mdev->agreed_pro_version < 95 ?	DRBD_MAX_SIZE_H80_PACKET : DRBD_MAX_BIO_SIZE;
-
 	number = drbd_rs_number_requests(mdev);
 	if (number == 0)
 		goto requeue;

drivers/cpufreq/acpi-cpufreq.c

@@ -759,7 +759,7 @@ static void __exit acpi_cpufreq_exit(void)
 
 	cpufreq_unregister_driver(&acpi_cpufreq_driver);
 
-	free_percpu(acpi_perf_data);
+	free_acpi_perf_data();
 }
 
 module_param(acpi_pstate_strict, uint, 0644);

drivers/firewire/ohci.c

@@ -264,6 +264,7 @@ static char ohci_driver_name[] = KBUILD_MODNAME;
 #define PCI_DEVICE_ID_AGERE_FW643	0x5901
 #define PCI_DEVICE_ID_JMICRON_JMB38X_FW	0x2380
 #define PCI_DEVICE_ID_TI_TSB12LV22	0x8009
+#define PCI_VENDOR_ID_PINNACLE_SYSTEMS	0x11bd
 
 #define QUIRK_CYCLE_TIMER		1
 #define QUIRK_RESET_PACKET		2
@@ -3190,6 +3191,11 @@ static int __devinit pci_probe(struct pci_dev *dev,
 	int i, err;
 	size_t size;
 
+	if (dev->vendor == PCI_VENDOR_ID_PINNACLE_SYSTEMS) {
+		dev_err(&dev->dev, "Pinnacle MovieBoard is not yet supported\n");
+		return -ENOSYS;
+	}
+
 	ohci = kzalloc(sizeof(*ohci), GFP_KERNEL);
 	if (ohci == NULL) {
 		err = -ENOMEM;

drivers/gpio/langwell_gpio.c

@@ -223,7 +223,7 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc)
 		gedr = gpio_reg(&lnw->chip, base, GEDR);
 		pending = readl(gedr);
 		while (pending) {
-			gpio = __ffs(pending) - 1;
+			gpio = __ffs(pending);
 			mask = BIT(gpio);
 			pending &= ~mask;
 			/* Clear before handling so we can't lose an edge */

drivers/gpio/tps65910-gpio.c

@@ -81,8 +81,10 @@ void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base)
 	switch(tps65910_chip_id(tps65910)) {
 	case TPS65910:
 		tps65910->gpio.ngpio	= 6;
+		break;
 	case TPS65911:
 		tps65910->gpio.ngpio	= 9;
+		break;
 	default:
 		return;
 	}

drivers/gpu/drm/drm_crtc.c

@@ -886,9 +886,6 @@ int drm_mode_group_init(struct drm_device *dev, struct drm_mode_group *group)
 	total_objects += dev->mode_config.num_connector;
 	total_objects += dev->mode_config.num_encoder;
 
-	if (total_objects == 0)
-		return -EINVAL;
-
 	group->id_list = kzalloc(total_objects * sizeof(uint32_t), GFP_KERNEL);
 	if (!group->id_list)
 		return -ENOMEM;

drivers/gpu/drm/radeon/evergreen.c

@@ -985,17 +985,19 @@ void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *sav
 {
 	save->vga_control[0] = RREG32(D1VGA_CONTROL);
 	save->vga_control[1] = RREG32(D2VGA_CONTROL);
-	save->vga_control[2] = RREG32(EVERGREEN_D3VGA_CONTROL);
-	save->vga_control[3] = RREG32(EVERGREEN_D4VGA_CONTROL);
-	save->vga_control[4] = RREG32(EVERGREEN_D5VGA_CONTROL);
-	save->vga_control[5] = RREG32(EVERGREEN_D6VGA_CONTROL);
 	save->vga_render_control = RREG32(VGA_RENDER_CONTROL);
 	save->vga_hdp_control = RREG32(VGA_HDP_CONTROL);
 	save->crtc_control[0] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET);
 	save->crtc_control[1] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET);
-	if (!(rdev->flags & RADEON_IS_IGP)) {
+	if (rdev->num_crtc >= 4) {
+		save->vga_control[2] = RREG32(EVERGREEN_D3VGA_CONTROL);
+		save->vga_control[3] = RREG32(EVERGREEN_D4VGA_CONTROL);
 		save->crtc_control[2] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET);
 		save->crtc_control[3] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET);
+	}
+	if (rdev->num_crtc >= 6) {
+		save->vga_control[4] = RREG32(EVERGREEN_D5VGA_CONTROL);
+		save->vga_control[5] = RREG32(EVERGREEN_D6VGA_CONTROL);
 		save->crtc_control[4] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET);
 		save->crtc_control[5] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET);
 	}
@@ -1004,36 +1006,46 @@ void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *sav
 	WREG32(VGA_RENDER_CONTROL, 0);
 	WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 1);
 	WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 1);
-	if (!(rdev->flags & RADEON_IS_IGP)) {
+	if (rdev->num_crtc >= 4) {
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 1);
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 1);
+	}
+	if (rdev->num_crtc >= 6) {
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 1);
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 1);
 	}
 	WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
 	WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
-	if (!(rdev->flags & RADEON_IS_IGP)) {
+	if (rdev->num_crtc >= 4) {
 		WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0);
 		WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0);
+	}
+	if (rdev->num_crtc >= 6) {
 		WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, 0);
 		WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
 	}
 	WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
 	WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
-	if (!(rdev->flags & RADEON_IS_IGP)) {
+	if (rdev->num_crtc >= 4) {
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0);
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0);
+	}
+	if (rdev->num_crtc >= 6) {
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0);
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
 	}
 
 	WREG32(D1VGA_CONTROL, 0);
 	WREG32(D2VGA_CONTROL, 0);
+	if (rdev->num_crtc >= 4) {
 		WREG32(EVERGREEN_D3VGA_CONTROL, 0);
 		WREG32(EVERGREEN_D4VGA_CONTROL, 0);
+	}
+	if (rdev->num_crtc >= 6) {
 		WREG32(EVERGREEN_D5VGA_CONTROL, 0);
 		WREG32(EVERGREEN_D6VGA_CONTROL, 0);
 	}
+}
 
 void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *save)
 {
@@ -1055,7 +1067,7 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s
 	WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS + EVERGREEN_CRTC1_REGISTER_OFFSET,
 	       (u32)rdev->mc.vram_start);
 
-	if (!(rdev->flags & RADEON_IS_IGP)) {
+	if (rdev->num_crtc >= 4) {
 		WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC2_REGISTER_OFFSET,
 		       upper_32_bits(rdev->mc.vram_start));
 		WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC2_REGISTER_OFFSET,
@@ -1073,7 +1085,8 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s
 		       (u32)rdev->mc.vram_start);
 		WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS + EVERGREEN_CRTC3_REGISTER_OFFSET,
 		       (u32)rdev->mc.vram_start);
-
+	}
+	if (rdev->num_crtc >= 6) {
 		WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC4_REGISTER_OFFSET,
 		       upper_32_bits(rdev->mc.vram_start));
 		WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC4_REGISTER_OFFSET,
@@ -1101,31 +1114,41 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s
 	/* Restore video state */
 	WREG32(D1VGA_CONTROL, save->vga_control[0]);
 	WREG32(D2VGA_CONTROL, save->vga_control[1]);
+	if (rdev->num_crtc >= 4) {
 		WREG32(EVERGREEN_D3VGA_CONTROL, save->vga_control[2]);
 		WREG32(EVERGREEN_D4VGA_CONTROL, save->vga_control[3]);
+	}
+	if (rdev->num_crtc >= 6) {
 		WREG32(EVERGREEN_D5VGA_CONTROL, save->vga_control[4]);
 		WREG32(EVERGREEN_D6VGA_CONTROL, save->vga_control[5]);
+	}
 	WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 1);
 	WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 1);
-	if (!(rdev->flags & RADEON_IS_IGP)) {
+	if (rdev->num_crtc >= 4) {
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 1);
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 1);
+	}
+	if (rdev->num_crtc >= 6) {
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 1);
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 1);
 	}
 	WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, save->crtc_control[0]);
 	WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, save->crtc_control[1]);
-	if (!(rdev->flags & RADEON_IS_IGP)) {
+	if (rdev->num_crtc >= 4) {
 		WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, save->crtc_control[2]);
 		WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, save->crtc_control[3]);
+	}
+	if (rdev->num_crtc >= 6) {
 		WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, save->crtc_control[4]);
 		WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, save->crtc_control[5]);
 	}
 	WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
 	WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
-	if (!(rdev->flags & RADEON_IS_IGP)) {
+	if (rdev->num_crtc >= 4) {
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0);
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0);
+	}
+	if (rdev->num_crtc >= 6) {
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0);
 		WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
 	}
@@ -2417,18 +2440,22 @@ void evergreen_disable_interrupt_state(struct radeon_device *rdev)
 	WREG32(GRBM_INT_CNTL, 0);
 	WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
 	WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
-	if (!(rdev->flags & RADEON_IS_IGP)) {
+	if (rdev->num_crtc >= 4) {
 		WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0);
 		WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0);
+	}
+	if (rdev->num_crtc >= 6) {
 		WREG32(INT_MASK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0);
 		WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
 	}
 
 	WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
 	WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
-	if (!(rdev->flags & RADEON_IS_IGP)) {
+	if (rdev->num_crtc >= 4) {
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0);
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0);
+	}
+	if (rdev->num_crtc >= 6) {
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, 0);
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
 	}
@@ -2547,19 +2574,25 @@ int evergreen_irq_set(struct radeon_device *rdev)
 
 	WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, crtc1);
 	WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, crtc2);
-	if (!(rdev->flags & RADEON_IS_IGP)) {
+	if (rdev->num_crtc >= 4) {
 		WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, crtc3);
 		WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, crtc4);
+	}
+	if (rdev->num_crtc >= 6) {
 		WREG32(INT_MASK + EVERGREEN_CRTC4_REGISTER_OFFSET, crtc5);
 		WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, crtc6);
 	}
 
 	WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1);
 	WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2);
+	if (rdev->num_crtc >= 4) {
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3);
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4);
+	}
+	if (rdev->num_crtc >= 6) {
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, grph5);
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6);
+	}
 
 	WREG32(DC_HPD1_INT_CONTROL, hpd1);
 	WREG32(DC_HPD2_INT_CONTROL, hpd2);
@@ -2583,53 +2616,57 @@ static inline void evergreen_irq_ack(struct radeon_device *rdev)
 	rdev->irq.stat_regs.evergreen.disp_int_cont5 = RREG32(DISP_INTERRUPT_STATUS_CONTINUE5);
 	rdev->irq.stat_regs.evergreen.d1grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET);
 	rdev->irq.stat_regs.evergreen.d2grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET);
+	if (rdev->num_crtc >= 4) {
 		rdev->irq.stat_regs.evergreen.d3grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET);
 		rdev->irq.stat_regs.evergreen.d4grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET);
+	}
+	if (rdev->num_crtc >= 6) {
 		rdev->irq.stat_regs.evergreen.d5grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET);
 		rdev->irq.stat_regs.evergreen.d6grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET);
+	}
 
 	if (rdev->irq.stat_regs.evergreen.d1grph_int & GRPH_PFLIP_INT_OCCURRED)
 		WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
 	if (rdev->irq.stat_regs.evergreen.d2grph_int & GRPH_PFLIP_INT_OCCURRED)
 		WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
-	if (rdev->irq.stat_regs.evergreen.d3grph_int & GRPH_PFLIP_INT_OCCURRED)
-		WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
-	if (rdev->irq.stat_regs.evergreen.d4grph_int & GRPH_PFLIP_INT_OCCURRED)
-		WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
-	if (rdev->irq.stat_regs.evergreen.d5grph_int & GRPH_PFLIP_INT_OCCURRED)
-		WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
-	if (rdev->irq.stat_regs.evergreen.d6grph_int & GRPH_PFLIP_INT_OCCURRED)
-		WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
-
 	if (rdev->irq.stat_regs.evergreen.disp_int & LB_D1_VBLANK_INTERRUPT)
 		WREG32(VBLANK_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, VBLANK_ACK);
 	if (rdev->irq.stat_regs.evergreen.disp_int & LB_D1_VLINE_INTERRUPT)
 		WREG32(VLINE_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, VLINE_ACK);
-
 	if (rdev->irq.stat_regs.evergreen.disp_int_cont & LB_D2_VBLANK_INTERRUPT)
 		WREG32(VBLANK_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, VBLANK_ACK);
 	if (rdev->irq.stat_regs.evergreen.disp_int_cont & LB_D2_VLINE_INTERRUPT)
 		WREG32(VLINE_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, VLINE_ACK);
 
+	if (rdev->num_crtc >= 4) {
+		if (rdev->irq.stat_regs.evergreen.d3grph_int & GRPH_PFLIP_INT_OCCURRED)
+			WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
+		if (rdev->irq.stat_regs.evergreen.d4grph_int & GRPH_PFLIP_INT_OCCURRED)
+			WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
 		if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VBLANK_INTERRUPT)
 			WREG32(VBLANK_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VBLANK_ACK);
 		if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VLINE_INTERRUPT)
 			WREG32(VLINE_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VLINE_ACK);
-
 		if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VBLANK_INTERRUPT)
 			WREG32(VBLANK_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VBLANK_ACK);
 		if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VLINE_INTERRUPT)
 			WREG32(VLINE_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VLINE_ACK);
+	}
 
+	if (rdev->num_crtc >= 6) {
+		if (rdev->irq.stat_regs.evergreen.d5grph_int & GRPH_PFLIP_INT_OCCURRED)
+			WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
+		if (rdev->irq.stat_regs.evergreen.d6grph_int & GRPH_PFLIP_INT_OCCURRED)
+			WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
 		if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VBLANK_INTERRUPT)
 			WREG32(VBLANK_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VBLANK_ACK);
 		if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VLINE_INTERRUPT)
 			WREG32(VLINE_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VLINE_ACK);
-
 		if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VBLANK_INTERRUPT)
 			WREG32(VBLANK_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VBLANK_ACK);
 		if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VLINE_INTERRUPT)
 			WREG32(VLINE_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VLINE_ACK);
+	}
 
 	if (rdev->irq.stat_regs.evergreen.disp_int & DC_HPD1_INTERRUPT) {
 		tmp = RREG32(DC_HPD1_INT_CONTROL);
@@ -3237,6 +3274,7 @@ void evergreen_fini(struct radeon_device *rdev)
 	r700_cp_fini(rdev);
 	r600_irq_fini(rdev);
 	radeon_wb_fini(rdev);
+	radeon_ib_pool_fini(rdev);
 	radeon_irq_kms_fini(rdev);
 	evergreen_pcie_gart_fini(rdev);
 	radeon_gem_fini(rdev);

drivers/gpu/drm/radeon/evergreend.h

@@ -466,7 +466,7 @@
 #define IH_RB_WPTR_ADDR_LO                                0x3e14
 #define IH_CNTL                                           0x3e18
 #       define ENABLE_INTR                                (1 << 0)
-#       define IH_MC_SWAP(x)                              ((x) << 2)
+#       define IH_MC_SWAP(x)                              ((x) << 1)
 #       define IH_MC_SWAP_NONE                            0
 #       define IH_MC_SWAP_16BIT                           1
 #       define IH_MC_SWAP_32BIT                           2
@@ -547,7 +547,7 @@
 #       define LB_D5_VBLANK_INTERRUPT                   (1 << 3)
 #       define DC_HPD5_INTERRUPT                        (1 << 17)
 #       define DC_HPD5_RX_INTERRUPT                     (1 << 18)
-#define DISP_INTERRUPT_STATUS_CONTINUE5                 0x6050
+#define DISP_INTERRUPT_STATUS_CONTINUE5                 0x6150
 #       define LB_D6_VLINE_INTERRUPT                    (1 << 2)
 #       define LB_D6_VBLANK_INTERRUPT                   (1 << 3)
 #       define DC_HPD6_INTERRUPT                        (1 << 17)

drivers/gpu/drm/radeon/ni.c

@@ -1581,6 +1581,7 @@ void cayman_fini(struct radeon_device *rdev)
 	cayman_cp_fini(rdev);
 	r600_irq_fini(rdev);
 	radeon_wb_fini(rdev);
+	radeon_ib_pool_fini(rdev);
 	radeon_irq_kms_fini(rdev);
 	cayman_pcie_gart_fini(rdev);
 	radeon_gem_fini(rdev);

drivers/gpu/drm/radeon/r600.c

@@ -2628,6 +2628,7 @@ void r600_fini(struct radeon_device *rdev)
 	r600_cp_fini(rdev);
 	r600_irq_fini(rdev);
 	radeon_wb_fini(rdev);
+	radeon_ib_pool_fini(rdev);
 	radeon_irq_kms_fini(rdev);
 	r600_pcie_gart_fini(rdev);
 	radeon_agp_fini(rdev);

drivers/gpu/drm/radeon/r600d.h

@@ -536,7 +536,7 @@
 #define IH_RB_WPTR_ADDR_LO                                0x3e14
 #define IH_CNTL                                           0x3e18
 #       define ENABLE_INTR                                (1 << 0)
-#       define IH_MC_SWAP(x)                              ((x) << 2)
+#       define IH_MC_SWAP(x)                              ((x) << 1)
 #       define IH_MC_SWAP_NONE                            0
 #       define IH_MC_SWAP_16BIT                           1
 #       define IH_MC_SWAP_32BIT                           2

drivers/gpu/drm/radeon/rv770.c

@@ -1368,6 +1368,7 @@ void rv770_fini(struct radeon_device *rdev)
 	r700_cp_fini(rdev);
 	r600_irq_fini(rdev);
 	radeon_wb_fini(rdev);
+	radeon_ib_pool_fini(rdev);
 	radeon_irq_kms_fini(rdev);
 	rv770_pcie_gart_fini(rdev);
 	rv770_vram_scratch_fini(rdev);

drivers/hwmon/lm95241.c

@@ -98,11 +98,16 @@ struct lm95241_data {
 };
 
 /* Conversions */
-static int TempFromReg(u8 val_h, u8 val_l)
+static int temp_from_reg_signed(u8 val_h, u8 val_l)
 {
-	if (val_h & 0x80)
+	s16 val_hl = (val_h << 8) | val_l;
-		return val_h - 0x100;
+	return val_hl * 1000 / 256;
-	return val_h * 1000 + val_l * 1000 / 256;
+}
+
+static int temp_from_reg_unsigned(u8 val_h, u8 val_l)
+{
+	u16 val_hl = (val_h << 8) | val_l;
+	return val_hl * 1000 / 256;
 }
 
 static struct lm95241_data *lm95241_update_device(struct device *dev)
@@ -135,10 +140,13 @@ static ssize_t show_input(struct device *dev, struct device_attribute *attr,
 			  char *buf)
 {
 	struct lm95241_data *data = lm95241_update_device(dev);
+	int index = to_sensor_dev_attr(attr)->index;
 
 	return snprintf(buf, PAGE_SIZE - 1, "%d\n",
-		TempFromReg(data->temp[to_sensor_dev_attr(attr)->index],
+			index == 0 || (data->config & (1 << (index / 2))) ?
-			    data->temp[to_sensor_dev_attr(attr)->index + 1]));
+		temp_from_reg_signed(data->temp[index], data->temp[index + 1]) :
+		temp_from_reg_unsigned(data->temp[index],
+				       data->temp[index + 1]));
 }
 
 static ssize_t show_type(struct device *dev, struct device_attribute *attr,
@@ -339,7 +347,7 @@ static int lm95241_detect(struct i2c_client *new_client,
 	if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
 	     == MANUFACTURER_ID)
 	    && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
-		>= DEFAULT_REVISION)) {
+		== DEFAULT_REVISION)) {
 		name = DEVNAME;
 	} else {
 		dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n",

drivers/hwmon/pmbus.c

@@ -59,16 +59,17 @@ static void pmbus_find_sensor_groups(struct i2c_client *client,
 		if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_34))
 			info->func[0] |= PMBUS_HAVE_STATUS_FAN34;
 	}
-	if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) {
+	if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1))
 		info->func[0] |= PMBUS_HAVE_TEMP;
-		if (pmbus_check_byte_register(client, 0,
-					      PMBUS_STATUS_TEMPERATURE))
-			info->func[0] |= PMBUS_HAVE_STATUS_TEMP;
-	}
 	if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_2))
 		info->func[0] |= PMBUS_HAVE_TEMP2;
 	if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3))
 		info->func[0] |= PMBUS_HAVE_TEMP3;
+	if (info->func[0] & (PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2
+			     | PMBUS_HAVE_TEMP3)
+	    && pmbus_check_byte_register(client, 0,
+					 PMBUS_STATUS_TEMPERATURE))
+			info->func[0] |= PMBUS_HAVE_STATUS_TEMP;
 
 	/* Sensors detected on all pages */
 	for (page = 0; page < info->pages; page++) {

drivers/i2c/busses/i2c-bfin-twi.c

@@ -193,7 +193,13 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
 		return;
 	}
 	if (twi_int_status & MCOMP) {
-		if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
+		if ((read_MASTER_CTL(iface) & MEN) == 0 &&
+			(iface->cur_mode == TWI_I2C_MODE_REPEAT ||
+			iface->cur_mode == TWI_I2C_MODE_COMBINED)) {
+			iface->result = -1;
+			write_INT_MASK(iface, 0);
+			write_MASTER_CTL(iface, 0);
+		} else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
 			if (iface->readNum == 0) {
 				/* set the read number to 1 and ask for manual
 				 * stop in block combine mode

drivers/i2c/busses/i2c-s3c2410.c

@@ -248,12 +248,12 @@ static inline int is_msgend(struct s3c24xx_i2c *i2c)
 	return i2c->msg_ptr >= i2c->msg->len;
 }
 
-/* i2s_s3c_irq_nextbyte
+/* i2c_s3c_irq_nextbyte
  *
  * process an interrupt and work out what to do
  */
 
-static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
+static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 {
 	unsigned long tmp;
 	unsigned char byte;
@@ -264,7 +264,6 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 	case STATE_IDLE:
 		dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__);
 		goto out;
-		break;
 
 	case STATE_STOP:
 		dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__);
@@ -444,7 +443,7 @@ static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id)
 	/* pretty much this leaves us with the fact that we've
 	 * transmitted or received whatever byte we last sent */
 
-	i2s_s3c_irq_nextbyte(i2c, status);
+	i2c_s3c_irq_nextbyte(i2c, status);
 
  out:
 	return IRQ_HANDLED;

drivers/i2c/busses/i2c-tegra.c

@@ -40,8 +40,10 @@
 #define I2C_CNFG_NEW_MASTER_FSM			(1<<11)
 #define I2C_STATUS				0x01C
 #define I2C_SL_CNFG				0x020
+#define I2C_SL_CNFG_NACK			(1<<1)
 #define I2C_SL_CNFG_NEWSL			(1<<2)
 #define I2C_SL_ADDR1				0x02c
+#define I2C_SL_ADDR2				0x030
 #define I2C_TX_FIFO				0x050
 #define I2C_RX_FIFO				0x054
 #define I2C_PACKET_TRANSFER_STATUS		0x058
@@ -337,7 +339,11 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 
 	if (!i2c_dev->is_dvc) {
 		u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
-		i2c_writel(i2c_dev, sl_cfg | I2C_SL_CNFG_NEWSL, I2C_SL_CNFG);
+		sl_cfg |= I2C_SL_CNFG_NACK | I2C_SL_CNFG_NEWSL;
+		i2c_writel(i2c_dev, sl_cfg, I2C_SL_CNFG);
+		i2c_writel(i2c_dev, 0xfc, I2C_SL_ADDR1);
+		i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2);
+
 	}
 
 	val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT |

drivers/input/keyboard/pmic8xxx-keypad.c

@@ -520,7 +520,8 @@ static void pmic8xxx_kp_close(struct input_dev *dev)
  */
 static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev)
 {
-	const struct pm8xxx_keypad_platform_data *pdata = mfd_get_data(pdev);
+	const struct pm8xxx_keypad_platform_data *pdata =
+					dev_get_platdata(&pdev->dev);
 	const struct matrix_keymap_data *keymap_data;
 	struct pmic8xxx_kp *kp;
 	int rc;

drivers/input/misc/pmic8xxx-pwrkey.c

@@ -90,7 +90,8 @@ static int __devinit pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 	unsigned int delay;
 	u8 pon_cntl;
 	struct pmic8xxx_pwrkey *pwrkey;
-	const struct pm8xxx_pwrkey_platform_data *pdata = mfd_get_data(pdev);
+	const struct pm8xxx_pwrkey_platform_data *pdata =
+					dev_get_platdata(&pdev->dev);
 
 	if (!pdata) {
 		dev_err(&pdev->dev, "power key platform data not supplied\n");

drivers/leds/leds-pca9532.c

@@ -88,7 +88,7 @@ static const struct pca9532_chip_info pca9532_chip_info_tbl[] = {
 
 static struct i2c_driver pca9532_driver = {
 	.driver = {
-		.name = "pca953x",
+		.name = "leds-pca953x",
 	},
 	.probe = pca9532_probe,
 	.remove = pca9532_remove,

drivers/media/rc/fintek-cir.c

@@ -597,12 +597,17 @@ static void __devexit fintek_remove(struct pnp_dev *pdev)
 static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state)
 {
 	struct fintek_dev *fintek = pnp_get_drvdata(pdev);
+	unsigned long flags;
 
 	fit_dbg("%s called", __func__);
 
+	spin_lock_irqsave(&fintek->fintek_lock, flags);
+
 	/* disable all CIR interrupts */
 	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
 
+	spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+
 	fintek_config_mode_enable(fintek);
 
 	/* disable cir logical dev */

drivers/media/rc/imon.c

@@ -307,6 +307,14 @@ static const struct {
 	/* 0xffdc iMON MCE VFD */
 	{ 0x00010000ffffffeell, KEY_VOLUMEUP },
 	{ 0x01000000ffffffeell, KEY_VOLUMEDOWN },
+	{ 0x00000001ffffffeell, KEY_MUTE },
+	{ 0x0000000fffffffeell, KEY_MEDIA },
+	{ 0x00000012ffffffeell, KEY_UP },
+	{ 0x00000013ffffffeell, KEY_DOWN },
+	{ 0x00000014ffffffeell, KEY_LEFT },
+	{ 0x00000015ffffffeell, KEY_RIGHT },
+	{ 0x00000016ffffffeell, KEY_ENTER },
+	{ 0x00000017ffffffeell, KEY_ESC },
 	/* iMON Knob values */
 	{ 0x000100ffffffffeell, KEY_VOLUMEUP },
 	{ 0x010000ffffffffeell, KEY_VOLUMEDOWN },
@@ -1582,16 +1590,16 @@ static void imon_incoming_packet(struct imon_context *ictx,
 	/* Only panel type events left to process now */
 	spin_lock_irqsave(&ictx->kc_lock, flags);
 
+	do_gettimeofday(&t);
 	/* KEY_MUTE repeats from knob need to be suppressed */
 	if (ictx->kc == KEY_MUTE && ictx->kc == ictx->last_keycode) {
-		do_gettimeofday(&t);
 		msec = tv2int(&t, &prev_time);
-		prev_time = t;
 		if (msec < ictx->idev->rep[REP_DELAY]) {
 			spin_unlock_irqrestore(&ictx->kc_lock, flags);
 			return;
 		}
 	}
+	prev_time = t;
 	kc = ictx->kc;
 
 	spin_unlock_irqrestore(&ictx->kc_lock, flags);
@@ -1603,7 +1611,9 @@ static void imon_incoming_packet(struct imon_context *ictx,
 	input_report_key(ictx->idev, kc, 0);
 	input_sync(ictx->idev);
 
+	spin_lock_irqsave(&ictx->kc_lock, flags);
 	ictx->last_keycode = kc;
+	spin_unlock_irqrestore(&ictx->kc_lock, flags);
 
 	return;
 
@@ -1740,6 +1750,8 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
 		break;
 	/* iMON VFD, MCE IR */
+	case 0x46:
+	case 0x7e:
 	case 0x9e:
 		dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
@@ -1755,6 +1767,9 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 		dev_info(ictx->dev, "Unknown 0xffdc device, "
 			 "defaulting to VFD and iMON IR");
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
+		/* We don't know which one it is, allow user to set the
+		 * RC6 one from userspace if OTHER wasn't correct. */
+		allowed_protos |= RC_TYPE_RC6;
 		break;
 	}
 

drivers/media/rc/ir-raw.c

@@ -114,18 +114,20 @@ int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type)
 	s64			delta; /* ns */
 	DEFINE_IR_RAW_EVENT(ev);
 	int			rc = 0;
+	int			delay;
 
 	if (!dev->raw)
 		return -EINVAL;
 
 	now = ktime_get();
 	delta = ktime_to_ns(ktime_sub(now, dev->raw->last_event));
+	delay = MS_TO_NS(dev->input_dev->rep[REP_DELAY]);
 
 	/* Check for a long duration since last event or if we're
 	 * being called for the first time, note that delta can't
 	 * possibly be negative.
 	 */
-	if (delta > IR_MAX_DURATION || !dev->raw->last_type)
+	if (delta > delay || !dev->raw->last_type)
 		type |= IR_START_EVENT;
 	else
 		ev.duration = delta;

drivers/media/rc/ite-cir.c

@@ -1347,6 +1347,7 @@ static const struct ite_dev_params ite_dev_descs[] = {
 	{	/* 0: ITE8704 */
 	       .model = "ITE8704 CIR transceiver",
 	       .io_region_size = IT87_IOREG_LENGTH,
+	       .io_rsrc_no = 0,
 	       .hw_tx_capable = true,
 	       .sample_period = (u32) (1000000000ULL / 115200),
 	       .tx_carrier_freq = 38000,
@@ -1371,6 +1372,7 @@ static const struct ite_dev_params ite_dev_descs[] = {
 	{	/* 1: ITE8713 */
 	       .model = "ITE8713 CIR transceiver",
 	       .io_region_size = IT87_IOREG_LENGTH,
+	       .io_rsrc_no = 0,
 	       .hw_tx_capable = true,
 	       .sample_period = (u32) (1000000000ULL / 115200),
 	       .tx_carrier_freq = 38000,
@@ -1395,6 +1397,7 @@ static const struct ite_dev_params ite_dev_descs[] = {
 	{	/* 2: ITE8708 */
 	       .model = "ITE8708 CIR transceiver",
 	       .io_region_size = IT8708_IOREG_LENGTH,
+	       .io_rsrc_no = 0,
 	       .hw_tx_capable = true,
 	       .sample_period = (u32) (1000000000ULL / 115200),
 	       .tx_carrier_freq = 38000,
@@ -1420,6 +1423,7 @@ static const struct ite_dev_params ite_dev_descs[] = {
 	{	/* 3: ITE8709 */
 	       .model = "ITE8709 CIR transceiver",
 	       .io_region_size = IT8709_IOREG_LENGTH,
+	       .io_rsrc_no = 2,
 	       .hw_tx_capable = true,
 	       .sample_period = (u32) (1000000000ULL / 115200),
 	       .tx_carrier_freq = 38000,
@@ -1461,6 +1465,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
 	struct rc_dev *rdev = NULL;
 	int ret = -ENOMEM;
 	int model_no;
+	int io_rsrc_no;
 
 	ite_dbg("%s called", __func__);
 
@@ -1490,10 +1495,11 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
 
 	/* get the description for the device */
 	dev_desc = &ite_dev_descs[model_no];
+	io_rsrc_no = dev_desc->io_rsrc_no;
 
 	/* validate pnp resources */
-	if (!pnp_port_valid(pdev, 0) ||
+	if (!pnp_port_valid(pdev, io_rsrc_no) ||
-	    pnp_port_len(pdev, 0) != dev_desc->io_region_size) {
+	    pnp_port_len(pdev, io_rsrc_no) != dev_desc->io_region_size) {
 		dev_err(&pdev->dev, "IR PNP Port not valid!\n");
 		goto failure;
 	}
@@ -1504,7 +1510,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
 	}
 
 	/* store resource values */
-	itdev->cir_addr = pnp_port_start(pdev, 0);
+	itdev->cir_addr = pnp_port_start(pdev, io_rsrc_no);
 	itdev->cir_irq = pnp_irq(pdev, 0);
 
 	/* initialize spinlocks */

drivers/media/rc/ite-cir.h

@@ -57,6 +57,9 @@ struct ite_dev_params {
 	/* size of the I/O region */
 	int io_region_size;
 
+	/* IR pnp I/O resource number */
+	int io_rsrc_no;
+
 	/* true if the hardware supports transmission */
 	bool hw_tx_capable;
 

drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c

@@ -15,43 +15,39 @@
 /* Pinnacle PCTV HD 800i mini remote */
 
 static struct rc_map_table pinnacle_pctv_hd[] = {
-
+	/* Key codes for the tiny Pinnacle remote*/
-	{ 0x0f, KEY_1 },
+	{ 0x0700, KEY_MUTE },
-	{ 0x15, KEY_2 },
+	{ 0x0701, KEY_MENU }, /* Pinnacle logo */
-	{ 0x10, KEY_3 },
+	{ 0x0739, KEY_POWER },
-	{ 0x18, KEY_4 },
+	{ 0x0703, KEY_VOLUMEUP },
-	{ 0x1b, KEY_5 },
+	{ 0x0709, KEY_VOLUMEDOWN },
-	{ 0x1e, KEY_6 },
+	{ 0x0706, KEY_CHANNELUP },
-	{ 0x11, KEY_7 },
+	{ 0x070c, KEY_CHANNELDOWN },
-	{ 0x21, KEY_8 },
+	{ 0x070f, KEY_1 },
-	{ 0x12, KEY_9 },
+	{ 0x0715, KEY_2 },
-	{ 0x27, KEY_0 },
+	{ 0x0710, KEY_3 },
-
+	{ 0x0718, KEY_4 },
-	{ 0x24, KEY_ZOOM },
+	{ 0x071b, KEY_5 },
-	{ 0x2a, KEY_SUBTITLE },
+	{ 0x071e, KEY_6 },
-
+	{ 0x0711, KEY_7 },
-	{ 0x00, KEY_MUTE },
+	{ 0x0721, KEY_8 },
-	{ 0x01, KEY_ENTER },	/* Pinnacle Logo */
+	{ 0x0712, KEY_9 },
-	{ 0x39, KEY_POWER },
+	{ 0x0727, KEY_0 },
-
+	{ 0x0724, KEY_ZOOM }, /* 'Square' key */
-	{ 0x03, KEY_VOLUMEUP },
+	{ 0x072a, KEY_SUBTITLE },   /* 'T' key */
-	{ 0x09, KEY_VOLUMEDOWN },
+	{ 0x072d, KEY_REWIND },
-	{ 0x06, KEY_CHANNELUP },
+	{ 0x0730, KEY_PLAYPAUSE },
-	{ 0x0c, KEY_CHANNELDOWN },
+	{ 0x0733, KEY_FASTFORWARD },
-
+	{ 0x0736, KEY_RECORD },
-	{ 0x2d, KEY_REWIND },
+	{ 0x073c, KEY_STOP },
-	{ 0x30, KEY_PLAYPAUSE },
+	{ 0x073f, KEY_HELP }, /* '?' key */
-	{ 0x33, KEY_FASTFORWARD },
-	{ 0x3c, KEY_STOP },
-	{ 0x36, KEY_RECORD },
-	{ 0x3f, KEY_EPG },	/* Labeled "?" */
 };
 
 static struct rc_map_list pinnacle_pctv_hd_map = {
 	.map = {
 		.scan    = pinnacle_pctv_hd,
 		.size    = ARRAY_SIZE(pinnacle_pctv_hd),
-		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_RC5,
 		.name    = RC_MAP_PINNACLE_PCTV_HD,
 	}
 };

drivers/media/rc/lirc_dev.c

@@ -55,6 +55,8 @@ struct irctl {
 	struct lirc_buffer *buf;
 	unsigned int chunk_size;
 
+	struct cdev *cdev;
+
 	struct task_struct *task;
 	long jiffies_to_wait;
 };
@@ -62,7 +64,6 @@ struct irctl {
 static DEFINE_MUTEX(lirc_dev_lock);
 
 static struct irctl *irctls[MAX_IRCTL_DEVICES];
-static struct cdev cdevs[MAX_IRCTL_DEVICES];
 
 /* Only used for sysfs but defined to void otherwise */
 static struct class *lirc_class;
@@ -167,9 +168,13 @@ static struct file_operations lirc_dev_fops = {
 
 static int lirc_cdev_add(struct irctl *ir)
 {
-	int retval;
+	int retval = -ENOMEM;
 	struct lirc_driver *d = &ir->d;
-	struct cdev *cdev = &cdevs[d->minor];
+	struct cdev *cdev;
+
+	cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+	if (!cdev)
+		goto err_out;
 
 	if (d->fops) {
 		cdev_init(cdev, d->fops);
@@ -180,12 +185,20 @@ static int lirc_cdev_add(struct irctl *ir)
 	}
 	retval = kobject_set_name(&cdev->kobj, "lirc%d", d->minor);
 	if (retval)
-		return retval;
+		goto err_out;
 
 	retval = cdev_add(cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1);
-	if (retval)
+	if (retval) {
 		kobject_put(&cdev->kobj);
+		goto err_out;
+	}
 
+	ir->cdev = cdev;
+
+	return 0;
+
+err_out:
+	kfree(cdev);
 	return retval;
 }
 
@@ -380,7 +393,7 @@ int lirc_unregister_driver(int minor)
 		return -ENOENT;
 	}
 
-	cdev = &cdevs[minor];
+	cdev = ir->cdev;
 
 	mutex_lock(&lirc_dev_lock);
 
@@ -410,6 +423,7 @@ int lirc_unregister_driver(int minor)
 	} else {
 		lirc_irctl_cleanup(ir);
 		cdev_del(cdev);
+		kfree(cdev);
 		kfree(ir);
 		irctls[minor] = NULL;
 	}
@@ -453,7 +467,7 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file)
 		goto error;
 	}
 
-	cdev = &cdevs[iminor(inode)];
+	cdev = ir->cdev;
 	if (try_module_get(cdev->owner)) {
 		ir->open++;
 		retval = ir->d.set_use_inc(ir->d.data);
@@ -484,13 +498,15 @@ EXPORT_SYMBOL(lirc_dev_fop_open);
 int lirc_dev_fop_close(struct inode *inode, struct file *file)
 {
 	struct irctl *ir = irctls[iminor(inode)];
-	struct cdev *cdev = &cdevs[iminor(inode)];
+	struct cdev *cdev;
 
 	if (!ir) {
 		printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
 		return -EINVAL;
 	}
 
+	cdev = ir->cdev;
+
 	dev_dbg(ir->d.dev, LOGHEAD "close called\n", ir->d.name, ir->d.minor);
 
 	WARN_ON(mutex_lock_killable(&lirc_dev_lock));
@@ -503,6 +519,7 @@ int lirc_dev_fop_close(struct inode *inode, struct file *file)
 		lirc_irctl_cleanup(ir);
 		cdev_del(cdev);
 		irctls[ir->d.minor] = NULL;
+		kfree(cdev);
 		kfree(ir);
 	}
 

drivers/media/rc/mceusb.c

@@ -108,6 +108,12 @@ static int debug = 1;
 static int debug;
 #endif
 
+#define mce_dbg(dev, fmt, ...)					\
+	do {							\
+		if (debug)					\
+			dev_info(dev, fmt, ## __VA_ARGS__);	\
+	} while (0)
+
 /* general constants */
 #define SEND_FLAG_IN_PROGRESS	1
 #define SEND_FLAG_COMPLETE	2
@@ -246,6 +252,9 @@ static struct usb_device_id mceusb_dev_table[] = {
 	  .driver_info = MCE_GEN2_TX_INV },
 	/* SMK eHome Infrared Transceiver */
 	{ USB_DEVICE(VENDOR_SMK, 0x0338) },
+	/* SMK/I-O Data GV-MC7/RCKIT Receiver */
+	{ USB_DEVICE(VENDOR_SMK, 0x0353),
+	  .driver_info = MCE_GEN2_NO_TX },
 	/* Tatung eHome Infrared Transceiver */
 	{ USB_DEVICE(VENDOR_TATUNG, 0x9150) },
 	/* Shuttle eHome Infrared Transceiver */
@@ -606,12 +615,15 @@ static void mce_async_callback(struct urb *urb, struct pt_regs *regs)
 	if (ir) {
 		len = urb->actual_length;
 
-		dev_dbg(ir->dev, "callback called (status=%d len=%d)\n",
+		mce_dbg(ir->dev, "callback called (status=%d len=%d)\n",
 			urb->status, len);
 
 		mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true);
 	}
 
+	/* the transfer buffer and urb were allocated in mce_request_packet */
+	kfree(urb->transfer_buffer);
+	usb_free_urb(urb);
 }
 
 /* request incoming or send outgoing usb packet - used to initialize remote */
@@ -655,17 +667,17 @@ static void mce_request_packet(struct mceusb_dev *ir, unsigned char *data,
 		return;
 	}
 
-	dev_dbg(dev, "receive request called (size=%#x)\n", size);
+	mce_dbg(dev, "receive request called (size=%#x)\n", size);
 
 	async_urb->transfer_buffer_length = size;
 	async_urb->dev = ir->usbdev;
 
 	res = usb_submit_urb(async_urb, GFP_ATOMIC);
 	if (res) {
-		dev_dbg(dev, "receive request FAILED! (res=%d)\n", res);
+		mce_dbg(dev, "receive request FAILED! (res=%d)\n", res);
 		return;
 	}
-	dev_dbg(dev, "receive request complete (res=%d)\n", res);
+	mce_dbg(dev, "receive request complete (res=%d)\n", res);
 }
 
 static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
@@ -673,9 +685,9 @@ static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
 	mce_request_packet(ir, data, size, MCEUSB_TX);
 }
 
-static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size)
+static void mce_flush_rx_buffer(struct mceusb_dev *ir, int size)
 {
-	mce_request_packet(ir, data, size, MCEUSB_RX);
+	mce_request_packet(ir, NULL, size, MCEUSB_RX);
 }
 
 /* Send data out the IR blaster port(s) */
@@ -794,7 +806,7 @@ static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier)
 			ir->carrier = carrier;
 			cmdbuf[2] = MCE_CMD_SIG_END;
 			cmdbuf[3] = MCE_IRDATA_TRAILER;
-			dev_dbg(ir->dev, "%s: disabling carrier "
+			mce_dbg(ir->dev, "%s: disabling carrier "
 				"modulation\n", __func__);
 			mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
 			return carrier;
@@ -806,7 +818,7 @@ static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier)
 				ir->carrier = carrier;
 				cmdbuf[2] = prescaler;
 				cmdbuf[3] = divisor;
-				dev_dbg(ir->dev, "%s: requesting %u HZ "
+				mce_dbg(ir->dev, "%s: requesting %u HZ "
 					"carrier\n", __func__, carrier);
 
 				/* Transmit new carrier to mce device */
@@ -879,7 +891,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 			rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
 					 * US_TO_NS(MCE_TIME_UNIT);
 
-			dev_dbg(ir->dev, "Storing %s with duration %d\n",
+			mce_dbg(ir->dev, "Storing %s with duration %d\n",
 				rawir.pulse ? "pulse" : "space",
 				rawir.duration);
 
@@ -911,7 +923,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 		if (ir->parser_state != CMD_HEADER && !ir->rem)
 			ir->parser_state = CMD_HEADER;
 	}
-	dev_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
+	mce_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
 	ir_raw_event_handle(ir->rc);
 }
 
@@ -933,7 +945,7 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
 
 	if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
 		ir->send_flags = SEND_FLAG_COMPLETE;
-		dev_dbg(ir->dev, "setup answer received %d bytes\n",
+		mce_dbg(ir->dev, "setup answer received %d bytes\n",
 			buf_len);
 	}
 
@@ -951,7 +963,7 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
 
 	case -EPIPE:
 	default:
-		dev_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
+		mce_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
 		break;
 	}
 
@@ -961,7 +973,6 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
 static void mceusb_gen1_init(struct mceusb_dev *ir)
 {
 	int ret;
-	int maxp = ir->len_in;
 	struct device *dev = ir->dev;
 	char *data;
 
@@ -978,8 +989,8 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
 	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
 			      USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
 			      data, USB_CTRL_MSG_SZ, HZ * 3);
-	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - ret = %d\n", __func__, ret);
-	dev_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
+	mce_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
 		__func__, data[0], data[1]);
 
 	/* set feature: bit rate 38400 bps */
@@ -987,71 +998,56 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
 			      USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
 			      0xc04e, 0x0000, NULL, 0, HZ * 3);
 
-	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - ret = %d\n", __func__, ret);
 
 	/* bRequest 4: set char length to 8 bits */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      4, USB_TYPE_VENDOR,
 			      0x0808, 0x0000, NULL, 0, HZ * 3);
-	dev_dbg(dev, "%s - retB = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - retB = %d\n", __func__, ret);
 
 	/* bRequest 2: set handshaking to use DTR/DSR */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      2, USB_TYPE_VENDOR,
 			      0x0000, 0x0100, NULL, 0, HZ * 3);
-	dev_dbg(dev, "%s - retC = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - retC = %d\n", __func__, ret);
 
 	/* device reset */
 	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* get hw/sw revision? */
 	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
-	mce_sync_in(ir, NULL, maxp);
 
 	kfree(data);
 };
 
 static void mceusb_gen2_init(struct mceusb_dev *ir)
 {
-	int maxp = ir->len_in;
-
 	/* device reset */
 	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* get hw/sw revision? */
 	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* unknown what the next two actually return... */
 	mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN));
-	mce_sync_in(ir, NULL, maxp);
 	mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2));
-	mce_sync_in(ir, NULL, maxp);
 }
 
 static void mceusb_get_parameters(struct mceusb_dev *ir)
 {
-	int maxp = ir->len_in;
-
 	/* get the carrier and frequency */
 	mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
-	mce_sync_in(ir, NULL, maxp);
 
-	if (!ir->flags.no_tx) {
+	if (!ir->flags.no_tx)
 		/* get the transmitter bitmask */
 		mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
-		mce_sync_in(ir, NULL, maxp);
-	}
 
 	/* get receiver timeout value */
 	mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* get receiver sensor setting */
 	mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
-	mce_sync_in(ir, NULL, maxp);
 }
 
 static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
@@ -1122,7 +1118,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 	bool tx_mask_normal;
 	int ir_intfnum;
 
-	dev_dbg(&intf->dev, "%s called\n", __func__);
+	mce_dbg(&intf->dev, "%s called\n", __func__);
 
 	idesc  = intf->cur_altsetting;
 
@@ -1150,7 +1146,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 			ep_in = ep;
 			ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
 			ep_in->bInterval = 1;
-			dev_dbg(&intf->dev, "acceptable inbound endpoint "
+			mce_dbg(&intf->dev, "acceptable inbound endpoint "
 				"found\n");
 		}
 
@@ -1165,12 +1161,12 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 			ep_out = ep;
 			ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
 			ep_out->bInterval = 1;
-			dev_dbg(&intf->dev, "acceptable outbound endpoint "
+			mce_dbg(&intf->dev, "acceptable outbound endpoint "
 				"found\n");
 		}
 	}
 	if (ep_in == NULL) {
-		dev_dbg(&intf->dev, "inbound and/or endpoint not found\n");
+		mce_dbg(&intf->dev, "inbound and/or endpoint not found\n");
 		return -ENODEV;
 	}
 
@@ -1215,16 +1211,16 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 	if (!ir->rc)
 		goto rc_dev_fail;
 
-	/* flush buffers on the device */
-	mce_sync_in(ir, NULL, maxp);
-	mce_sync_in(ir, NULL, maxp);
-
 	/* wire up inbound data handler */
 	usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in,
 		maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval);
 	ir->urb_in->transfer_dma = ir->dma_in;
 	ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
+	/* flush buffers on the device */
+	mce_dbg(&intf->dev, "Flushing receive buffers\n");
+	mce_flush_rx_buffer(ir, maxp);
+
 	/* initialize device */
 	if (ir->flags.microsoft_gen1)
 		mceusb_gen1_init(ir);

drivers/media/rc/nuvoton-cir.c

@@ -991,7 +991,6 @@ static int nvt_open(struct rc_dev *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&nvt->nvt_lock, flags);
-	nvt->in_use = true;
 	nvt_enable_cir(nvt);
 	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
 
@@ -1004,7 +1003,6 @@ static void nvt_close(struct rc_dev *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&nvt->nvt_lock, flags);
-	nvt->in_use = false;
 	nvt_disable_cir(nvt);
 	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
 }

drivers/media/rc/nuvoton-cir.h

@@ -70,7 +70,6 @@ struct nvt_dev {
 	struct ir_raw_event rawir;
 
 	spinlock_t nvt_lock;
-	bool in_use;
 
 	/* for rx */
 	u8 buf[RX_BUF_LEN];

drivers/media/rc/rc-main.c

@@ -522,17 +522,19 @@ EXPORT_SYMBOL_GPL(rc_g_keycode_from_table);
 /**
  * ir_do_keyup() - internal function to signal the release of a keypress
  * @dev:	the struct rc_dev descriptor of the device
+ * @sync:	whether or not to call input_sync
  *
  * This function is used internally to release a keypress, it must be
  * called with keylock held.
  */
-static void ir_do_keyup(struct rc_dev *dev)
+static void ir_do_keyup(struct rc_dev *dev, bool sync)
 {
 	if (!dev->keypressed)
 		return;
 
 	IR_dprintk(1, "keyup key 0x%04x\n", dev->last_keycode);
 	input_report_key(dev->input_dev, dev->last_keycode, 0);
+	if (sync)
 		input_sync(dev->input_dev);
 	dev->keypressed = false;
 }
@@ -549,7 +551,7 @@ void rc_keyup(struct rc_dev *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->keylock, flags);
-	ir_do_keyup(dev);
+	ir_do_keyup(dev, true);
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
 EXPORT_SYMBOL_GPL(rc_keyup);
@@ -578,7 +580,7 @@ static void ir_timer_keyup(unsigned long cookie)
 	 */
 	spin_lock_irqsave(&dev->keylock, flags);
 	if (time_is_before_eq_jiffies(dev->keyup_jiffies))
-		ir_do_keyup(dev);
+		ir_do_keyup(dev, true);
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
 
@@ -597,6 +599,7 @@ void rc_repeat(struct rc_dev *dev)
 	spin_lock_irqsave(&dev->keylock, flags);
 
 	input_event(dev->input_dev, EV_MSC, MSC_SCAN, dev->last_scancode);
+	input_sync(dev->input_dev);
 
 	if (!dev->keypressed)
 		goto out;
@@ -622,29 +625,28 @@ EXPORT_SYMBOL_GPL(rc_repeat);
 static void ir_do_keydown(struct rc_dev *dev, int scancode,
 			  u32 keycode, u8 toggle)
 {
+	bool new_event = !dev->keypressed ||
+			 dev->last_scancode != scancode ||
+			 dev->last_toggle != toggle;
+
+	if (new_event && dev->keypressed)
+		ir_do_keyup(dev, false);
+
 	input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode);
 
-	/* Repeat event? */
+	if (new_event && keycode != KEY_RESERVED) {
-	if (dev->keypressed &&
+		/* Register a keypress */
-	    dev->last_scancode == scancode &&
+		dev->keypressed = true;
-	    dev->last_toggle == toggle)
-		return;
-
-	/* Release old keypress */
-	ir_do_keyup(dev);
-
 		dev->last_scancode = scancode;
 		dev->last_toggle = toggle;
 		dev->last_keycode = keycode;
 
-	if (keycode == KEY_RESERVED)
+		IR_dprintk(1, "%s: key down event, "
-		return;
+			   "key 0x%04x, scancode 0x%04x\n",
-
-	/* Register a keypress */
-	dev->keypressed = true;
-	IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
 			   dev->input_name, keycode, scancode);
-	input_report_key(dev->input_dev, dev->last_keycode, 1);
+		input_report_key(dev->input_dev, keycode, 1);
+	}
+
 	input_sync(dev->input_dev);
 }
 

drivers/media/video/bt8xx/bttv-driver.c

@@ -3474,7 +3474,7 @@ static int radio_s_tuner(struct file *file, void *priv,
 	if (0 != t->index)
 		return -EINVAL;
 
-	bttv_call_all(btv, tuner, g_tuner, t);
+	bttv_call_all(btv, tuner, s_tuner, t);
 	return 0;
 }
 

drivers/media/video/cx18/cx18-ioctl.c

@@ -695,14 +695,10 @@ static int cx18_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt)
 
 	cx18_call_all(cx, tuner, g_tuner, vt);
 
-	if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) {
+	if (vt->type == V4L2_TUNER_RADIO)
 		strlcpy(vt->name, "cx18 Radio Tuner", sizeof(vt->name));
-		vt->type = V4L2_TUNER_RADIO;
+	else
-	} else {
 		strlcpy(vt->name, "cx18 TV Tuner", sizeof(vt->name));
-		vt->type = V4L2_TUNER_ANALOG_TV;
-	}
-
 	return 0;
 }
 

drivers/media/video/ivtv/ivtv-ioctl.c

@@ -1184,14 +1184,10 @@ static int ivtv_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt)
 
 	ivtv_call_all(itv, tuner, g_tuner, vt);
 
-	if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags)) {
+	if (vt->type == V4L2_TUNER_RADIO)
 		strlcpy(vt->name, "ivtv Radio Tuner", sizeof(vt->name));
-		vt->type = V4L2_TUNER_RADIO;
+	else
-	} else {
 		strlcpy(vt->name, "ivtv TV Tuner", sizeof(vt->name));
-		vt->type = V4L2_TUNER_ANALOG_TV;
-	}
-
 	return 0;
 }
 

drivers/media/video/m5mols/m5mols.h

@@ -2,10 +2,10 @@
  * Header for M-5MOLS 8M Pixel camera sensor with ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -106,23 +106,23 @@ struct m5mols_capture {
  * The each value according to each scenemode is recommended in the documents.
  */
 struct m5mols_scenemode {
-	u32 metering;
+	u8 metering;
-	u32 ev_bias;
+	u8 ev_bias;
-	u32 wb_mode;
+	u8 wb_mode;
-	u32 wb_preset;
+	u8 wb_preset;
-	u32 chroma_en;
+	u8 chroma_en;
-	u32 chroma_lvl;
+	u8 chroma_lvl;
-	u32 edge_en;
+	u8 edge_en;
-	u32 edge_lvl;
+	u8 edge_lvl;
-	u32 af_range;
+	u8 af_range;
-	u32 fd_mode;
+	u8 fd_mode;
-	u32 mcc;
+	u8 mcc;
-	u32 light;
+	u8 light;
-	u32 flash;
+	u8 flash;
-	u32 tone;
+	u8 tone;
-	u32 iso;
+	u8 iso;
-	u32 capt_mode;
+	u8 capt_mode;
-	u32 wdr;
+	u8 wdr;
 };
 
 /**
@@ -154,7 +154,6 @@ struct m5mols_version {
 	u8	str[VERSION_STRING_SIZE];
 	u8	af;
 };
-#define VERSION_SIZE sizeof(struct m5mols_version)
 
 /**
  * struct m5mols_info - M-5MOLS driver data structure
@@ -216,9 +215,9 @@ struct m5mols_info {
 	bool lock_ae;
 	bool lock_awb;
 	u8 resolution;
-	u32 interrupt;
+	u8 interrupt;
-	u32 mode;
+	u8 mode;
-	u32 mode_save;
+	u8 mode_save;
 	int (*set_power)(struct device *dev, int on);
 };
 
@@ -256,9 +255,11 @@ struct m5mols_info {
  *   +-------+---+----------+-----+------+------+------+------+
  *   - d[0..3]: according to size1
  */
-int m5mols_read(struct v4l2_subdev *sd, u32 reg_comb, u32 *val);
+int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg_comb, u8 *val);
+int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg_comb, u16 *val);
+int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg_comb, u32 *val);
 int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val);
-int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value);
+int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 value);
 
 /*
  * Mode operation of the M-5MOLS
@@ -280,12 +281,12 @@ int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value);
  * The available executing order between each modes are as follows:
  *   PARAMETER <---> MONITOR <---> CAPTURE
  */
-int m5mols_mode(struct m5mols_info *info, u32 mode);
+int m5mols_mode(struct m5mols_info *info, u8 mode);
 
-int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg);
+int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg);
 int m5mols_sync_controls(struct m5mols_info *info);
 int m5mols_start_capture(struct m5mols_info *info);
-int m5mols_do_scenemode(struct m5mols_info *info, u32 mode);
+int m5mols_do_scenemode(struct m5mols_info *info, u8 mode);
 int m5mols_lock_3a(struct m5mols_info *info, bool lock);
 int m5mols_set_ctrl(struct v4l2_ctrl *ctrl);
 

drivers/media/video/m5mols/m5mols_capture.c

@@ -2,10 +2,10 @@
  * The Capture code for Fujitsu M-5MOLS ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -58,9 +58,9 @@ static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num,
 {
 	u32 num, den;
 
-	int ret = m5mols_read(sd, addr_num, &num);
+	int ret = m5mols_read_u32(sd, addr_num, &num);
 	if (!ret)
-		ret = m5mols_read(sd, addr_den, &den);
+		ret = m5mols_read_u32(sd, addr_den, &den);
 	if (ret)
 		return ret;
 	*val = den == 0 ? 0 : num / den;
@@ -99,20 +99,20 @@ static int m5mols_capture_info(struct m5mols_info *info)
 	if (ret)
 		return ret;
 
-	ret = m5mols_read(sd, EXIF_INFO_ISO, (u32 *)&exif->iso_speed);
+	ret = m5mols_read_u16(sd, EXIF_INFO_ISO, &exif->iso_speed);
 	if (!ret)
-		ret = m5mols_read(sd, EXIF_INFO_FLASH, (u32 *)&exif->flash);
+		ret = m5mols_read_u16(sd, EXIF_INFO_FLASH, &exif->flash);
 	if (!ret)
-		ret = m5mols_read(sd, EXIF_INFO_SDR, (u32 *)&exif->sdr);
+		ret = m5mols_read_u16(sd, EXIF_INFO_SDR, &exif->sdr);
 	if (!ret)
-		ret = m5mols_read(sd, EXIF_INFO_QVAL, (u32 *)&exif->qval);
+		ret = m5mols_read_u16(sd, EXIF_INFO_QVAL, &exif->qval);
 	if (ret)
 		return ret;
 
 	if (!ret)
-		ret = m5mols_read(sd, CAPC_IMAGE_SIZE, &info->cap.main);
+		ret = m5mols_read_u32(sd, CAPC_IMAGE_SIZE, &info->cap.main);
 	if (!ret)
-		ret = m5mols_read(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
+		ret = m5mols_read_u32(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
 	if (!ret)
 		info->cap.total = info->cap.main + info->cap.thumb;
 
@@ -122,7 +122,7 @@ static int m5mols_capture_info(struct m5mols_info *info)
 int m5mols_start_capture(struct m5mols_info *info)
 {
 	struct v4l2_subdev *sd = &info->sd;
-	u32 resolution = info->resolution;
+	u8 resolution = info->resolution;
 	int timeout;
 	int ret;
 

drivers/media/video/m5mols/m5mols_controls.c

@@ -2,10 +2,10 @@
  * Controls for M-5MOLS 8M Pixel camera sensor with ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -130,7 +130,7 @@ static struct m5mols_scenemode m5mols_default_scenemode[] = {
  *
  * WARNING: The execution order is important. Do not change the order.
  */
-int m5mols_do_scenemode(struct m5mols_info *info, u32 mode)
+int m5mols_do_scenemode(struct m5mols_info *info, u8 mode)
 {
 	struct v4l2_subdev *sd = &info->sd;
 	struct m5mols_scenemode scenemode = m5mols_default_scenemode[mode];

drivers/media/video/m5mols/m5mols_core.c

@@ -2,10 +2,10 @@
  * Driver for M-5MOLS 8M Pixel camera sensor with ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -133,13 +133,13 @@ static u32 m5mols_swap_byte(u8 *data, u8 length)
 /**
  * m5mols_read -  I2C read function
  * @reg: combination of size, category and command for the I2C packet
+ * @size: desired size of I2C packet
  * @val: read value
  */
-int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val)
+static int m5mols_read(struct v4l2_subdev *sd, u32 size, u32 reg, u32 *val)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1];
-	u8 size = I2C_SIZE(reg);
 	u8 category = I2C_CATEGORY(reg);
 	u8 cmd = I2C_COMMAND(reg);
 	struct i2c_msg msg[2];
@@ -149,11 +149,6 @@ int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val)
 	if (!client->adapter)
 		return -ENODEV;
 
-	if (size != 1 && size != 2 && size != 4) {
-		v4l2_err(sd, "Wrong data size\n");
-		return -EINVAL;
-	}
-
 	msg[0].addr = client->addr;
 	msg[0].flags = 0;
 	msg[0].len = 5;
@@ -184,6 +179,52 @@ int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val)
 	return 0;
 }
 
+int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg, u8 *val)
+{
+	u32 val_32;
+	int ret;
+
+	if (I2C_SIZE(reg) != 1) {
+		v4l2_err(sd, "Wrong data size\n");
+		return -EINVAL;
+	}
+
+	ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32);
+	if (ret)
+		return ret;
+
+	*val = (u8)val_32;
+	return ret;
+}
+
+int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg, u16 *val)
+{
+	u32 val_32;
+	int ret;
+
+	if (I2C_SIZE(reg) != 2) {
+		v4l2_err(sd, "Wrong data size\n");
+		return -EINVAL;
+	}
+
+	ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32);
+	if (ret)
+		return ret;
+
+	*val = (u16)val_32;
+	return ret;
+}
+
+int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg, u32 *val)
+{
+	if (I2C_SIZE(reg) != 4) {
+		v4l2_err(sd, "Wrong data size\n");
+		return -EINVAL;
+	}
+
+	return m5mols_read(sd, I2C_SIZE(reg), reg, val);
+}
+
 /**
  * m5mols_write - I2C command write function
  * @reg: combination of size, category and command for the I2C packet
@@ -231,13 +272,14 @@ int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val)
 	return 0;
 }
 
-int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask)
+int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 mask)
 {
-	u32 busy, i;
+	u8 busy;
+	int i;
 	int ret;
 
 	for (i = 0; i < M5MOLS_I2C_CHECK_RETRY; i++) {
-		ret = m5mols_read(sd, I2C_REG(category, cmd, 1), &busy);
+		ret = m5mols_read_u8(sd, I2C_REG(category, cmd, 1), &busy);
 		if (ret < 0)
 			return ret;
 		if ((busy & mask) == mask)
@@ -252,14 +294,14 @@ int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask)
  * Before writing desired interrupt value the INT_FACTOR register should
  * be read to clear pending interrupts.
  */
-int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg)
+int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg)
 {
 	struct m5mols_info *info = to_m5mols(sd);
-	u32 mask = is_available_af(info) ? REG_INT_AF : 0;
+	u8 mask = is_available_af(info) ? REG_INT_AF : 0;
-	u32 dummy;
+	u8 dummy;
 	int ret;
 
-	ret = m5mols_read(sd, SYSTEM_INT_FACTOR, &dummy);
+	ret = m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &dummy);
 	if (!ret)
 		ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask);
 	return ret;
@@ -271,7 +313,7 @@ int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg)
  * It always accompanies a little delay changing the M-5MOLS mode, so it is
  * needed checking current busy status to guarantee right mode.
  */
-static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode)
+static int m5mols_reg_mode(struct v4l2_subdev *sd, u8 mode)
 {
 	int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode);
 
@@ -286,16 +328,16 @@ static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode)
  * can be guaranteed only when the sensor is operating in mode which which
  * a command belongs to.
  */
-int m5mols_mode(struct m5mols_info *info, u32 mode)
+int m5mols_mode(struct m5mols_info *info, u8 mode)
 {
 	struct v4l2_subdev *sd = &info->sd;
 	int ret = -EINVAL;
-	u32 reg;
+	u8 reg;
 
 	if (mode < REG_PARAMETER && mode > REG_CAPTURE)
 		return ret;
 
-	ret = m5mols_read(sd, SYSTEM_SYSMODE, &reg);
+	ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, &reg);
 	if ((!ret && reg == mode) || ret)
 		return ret;
 
@@ -344,41 +386,37 @@ int m5mols_mode(struct m5mols_info *info, u32 mode)
 static int m5mols_get_version(struct v4l2_subdev *sd)
 {
 	struct m5mols_info *info = to_m5mols(sd);
-	union {
+	struct m5mols_version *ver = &info->ver;
-		struct m5mols_version ver;
+	u8 *str = ver->str;
-		u8 bytes[VERSION_SIZE];
+	int i;
-	} version;
-	u32 *value;
-	u8 cmd = CAT0_VER_CUSTOMER;
 	int ret;
 
-	do {
+	ret = m5mols_read_u8(sd, SYSTEM_VER_CUSTOMER, &ver->customer);
-		value = (u32 *)&version.bytes[cmd];
+	if (!ret)
-		ret = m5mols_read(sd, SYSTEM_CMD(cmd), value);
+		ret = m5mols_read_u8(sd, SYSTEM_VER_PROJECT, &ver->project);
-		if (ret)
+	if (!ret)
-			return ret;
+		ret = m5mols_read_u16(sd, SYSTEM_VER_FIRMWARE, &ver->fw);
-	} while (cmd++ != CAT0_VER_AWB);
+	if (!ret)
-
+		ret = m5mols_read_u16(sd, SYSTEM_VER_HARDWARE, &ver->hw);
-	do {
+	if (!ret)
-		value = (u32 *)&version.bytes[cmd];
+		ret = m5mols_read_u16(sd, SYSTEM_VER_PARAMETER, &ver->param);
-		ret = m5mols_read(sd, SYSTEM_VER_STRING, value);
+	if (!ret)
-		if (ret)
+		ret = m5mols_read_u16(sd, SYSTEM_VER_AWB, &ver->awb);
-			return ret;
+	if (!ret)
-		if (cmd >= VERSION_SIZE - 1)
+		ret = m5mols_read_u8(sd, AF_VERSION, &ver->af);
-			return -EINVAL;
-	} while (version.bytes[cmd++]);
-
-	value = (u32 *)&version.bytes[cmd];
-	ret = m5mols_read(sd, AF_VERSION, value);
 	if (ret)
 		return ret;
 
-	/* store version information swapped for being readable */
+	for (i = 0; i < VERSION_STRING_SIZE; i++) {
-	info->ver	= version.ver;
+		ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &str[i]);
-	info->ver.fw	= be16_to_cpu(info->ver.fw);
+		if (ret)
-	info->ver.hw	= be16_to_cpu(info->ver.hw);
+			return ret;
-	info->ver.param	= be16_to_cpu(info->ver.param);
+	}
-	info->ver.awb	= be16_to_cpu(info->ver.awb);
+
+	ver->fw = be16_to_cpu(ver->fw);
+	ver->hw = be16_to_cpu(ver->hw);
+	ver->param = be16_to_cpu(ver->param);
+	ver->awb = be16_to_cpu(ver->awb);
 
 	v4l2_info(sd, "Manufacturer\t[%s]\n",
 			is_manufacturer(info, REG_SAMSUNG_ELECTRO) ?
@@ -722,7 +760,7 @@ static int m5mols_init_controls(struct m5mols_info *info)
 	int ret;
 
 	/* Determine value's range & step of controls for various FW version */
-	ret = m5mols_read(sd, AE_MAX_GAIN_MON, (u32 *)&max_exposure);
+	ret = m5mols_read_u16(sd, AE_MAX_GAIN_MON, &max_exposure);
 	if (!ret)
 		step_zoom = is_manufacturer(info, REG_SAMSUNG_OPTICS) ? 31 : 1;
 	if (ret)
@@ -842,18 +880,18 @@ static void m5mols_irq_work(struct work_struct *work)
 	struct m5mols_info *info =
 		container_of(work, struct m5mols_info, work_irq);
 	struct v4l2_subdev *sd = &info->sd;
-	u32 reg;
+	u8 reg;
 	int ret;
 
 	if (!is_powered(info) ||
-			m5mols_read(sd, SYSTEM_INT_FACTOR, &info->interrupt))
+			m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &info->interrupt))
 		return;
 
 	switch (info->interrupt & REG_INT_MASK) {
 	case REG_INT_AF:
 		if (!is_available_af(info))
 			break;
-		ret = m5mols_read(sd, AF_STATUS, &reg);
+		ret = m5mols_read_u8(sd, AF_STATUS, &reg);
 		v4l2_dbg(2, m5mols_debug, sd, "AF %s\n",
 			 reg == REG_AF_FAIL ? "Failed" :
 			 reg == REG_AF_SUCCESS ? "Success" :

drivers/media/video/m5mols/m5mols_reg.h

@@ -2,10 +2,10 @@
  * Register map for M-5MOLS 8M Pixel camera sensor with ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -56,13 +56,24 @@
  * more specific contents, see definition if file m5mols.h.
  */
 #define CAT0_VER_CUSTOMER	0x00	/* customer version */
-#define CAT0_VER_AWB		0x09	/* Auto WB version */
+#define CAT0_VER_PROJECT	0x01	/* project version */
+#define CAT0_VER_FIRMWARE	0x02	/* Firmware version */
+#define CAT0_VER_HARDWARE	0x04	/* Hardware version */
+#define CAT0_VER_PARAMETER	0x06	/* Parameter version */
+#define CAT0_VER_AWB		0x08	/* Auto WB version */
 #define CAT0_VER_STRING		0x0a	/* string including M-5MOLS */
 #define CAT0_SYSMODE		0x0b	/* SYSTEM mode register */
 #define CAT0_STATUS		0x0c	/* SYSTEM mode status register */
 #define CAT0_INT_FACTOR		0x10	/* interrupt pending register */
 #define CAT0_INT_ENABLE		0x11	/* interrupt enable register */
 
+#define SYSTEM_VER_CUSTOMER	I2C_REG(CAT_SYSTEM, CAT0_VER_CUSTOMER, 1)
+#define SYSTEM_VER_PROJECT	I2C_REG(CAT_SYSTEM, CAT0_VER_PROJECT, 1)
+#define SYSTEM_VER_FIRMWARE	I2C_REG(CAT_SYSTEM, CAT0_VER_FIRMWARE, 2)
+#define SYSTEM_VER_HARDWARE	I2C_REG(CAT_SYSTEM, CAT0_VER_HARDWARE, 2)
+#define SYSTEM_VER_PARAMETER	I2C_REG(CAT_SYSTEM, CAT0_VER_PARAMETER, 2)
+#define SYSTEM_VER_AWB		I2C_REG(CAT_SYSTEM, CAT0_VER_AWB, 2)
+
 #define SYSTEM_SYSMODE		I2C_REG(CAT_SYSTEM, CAT0_SYSMODE, 1)
 #define REG_SYSINIT		0x00	/* SYSTEM mode */
 #define REG_PARAMETER		0x01	/* PARAMETER mode */
@@ -382,8 +393,8 @@
 #define REG_CAP_START_MAIN	0x01
 #define REG_CAP_START_THUMB	0x03
 
-#define CAPC_IMAGE_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 1)
+#define CAPC_IMAGE_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 4)
-#define CAPC_THUMB_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 1)
+#define CAPC_THUMB_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 4)
 
 /*
  * Category F - Flash

drivers/media/video/msp3400-driver.c

@@ -480,12 +480,14 @@ static int msp_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 	struct msp_state *state = to_state(sd);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 
-	if (state->radio)
+	if (vt->type != V4L2_TUNER_ANALOG_TV)
 		return 0;
+	if (!state->radio) {
 		if (state->opmode == OPMODE_AUTOSELECT)
 			msp_detect_stereo(client);
-	vt->audmode    = state->audmode;
 		vt->rxsubchans = state->rxsubchans;
+	}
+	vt->audmode = state->audmode;
 	vt->capability |= V4L2_TUNER_CAP_STEREO |
 		V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
 	return 0;

drivers/media/video/mx1_camera.c

@@ -444,12 +444,9 @@ static int mx1_camera_add_device(struct soc_camera_device *icd)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
-	int ret;
 
-	if (pcdev->icd) {
+	if (pcdev->icd)
-		ret = -EBUSY;
+		return -EBUSY;
-		goto ebusy;
-	}
 
 	dev_info(icd->dev.parent, "MX1 Camera driver attached to camera %d\n",
 		 icd->devnum);
@@ -458,8 +455,7 @@ static int mx1_camera_add_device(struct soc_camera_device *icd)
 
 	pcdev->icd = icd;
 
-ebusy:
+	return 0;
-	return ret;
 }
 
 static void mx1_camera_remove_device(struct soc_camera_device *icd)

drivers/media/video/omap/omap_vout.c

@@ -982,6 +982,14 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
 	startindex = (vout->vid == OMAP_VIDEO1) ?
 		video1_numbuffers : video2_numbuffers;
 
+	/* Check the size of the buffer */
+	if (*size > vout->buffer_size) {
+		v4l2_err(&vout->vid_dev->v4l2_dev,
+				"buffer allocation mismatch [%u] [%u]\n",
+				*size, vout->buffer_size);
+		return -ENOMEM;
+	}
+
 	for (i = startindex; i < *count; i++) {
 		vout->buffer_size = *size;
 
@@ -1228,6 +1236,14 @@ static int omap_vout_mmap(struct file *file, struct vm_area_struct *vma)
 				(vma->vm_pgoff << PAGE_SHIFT));
 		return -EINVAL;
 	}
+	/* Check the size of the buffer */
+	if (size > vout->buffer_size) {
+		v4l2_err(&vout->vid_dev->v4l2_dev,
+				"insufficient memory [%lu] [%u]\n",
+				size, vout->buffer_size);
+		return -ENOMEM;
+	}
+
 	q->bufs[i]->baddr = vma->vm_start;
 
 	vma->vm_flags |= VM_RESERVED;
@@ -2391,7 +2407,7 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev)
 		/* Register the Video device with V4L2
 		 */
 		vfd = vout->vfd;
-		if (video_register_device(vfd, VFL_TYPE_GRABBER, k + 1) < 0) {
+		if (video_register_device(vfd, VFL_TYPE_GRABBER, -1) < 0) {
 			dev_err(&pdev->dev, ": Could not register "
 					"Video for Linux device\n");
 			vfd->minor = -1;

drivers/media/video/omap/omap_voutlib.c

@@ -193,7 +193,7 @@ int omap_vout_new_crop(struct v4l2_pix_format *pix,
 		return -EINVAL;
 
 	if (cpu_is_omap24xx()) {
-		if (crop->height != win->w.height) {
+		if (try_crop.height != win->w.height) {
 			/* If we're resizing vertically, we can't support a
 			 * crop width wider than 768 pixels.
 			 */
@@ -202,7 +202,7 @@ int omap_vout_new_crop(struct v4l2_pix_format *pix,
 		}
 	}
 	/* vertical resizing */
-	vresize = (1024 * crop->height) / win->w.height;
+	vresize = (1024 * try_crop.height) / win->w.height;
 	if (cpu_is_omap24xx() && (vresize > 2048))
 		vresize = 2048;
 	else if (cpu_is_omap34xx() && (vresize > 4096))
@@ -221,7 +221,7 @@ int omap_vout_new_crop(struct v4l2_pix_format *pix,
 			try_crop.height = 2;
 	}
 	/* horizontal resizing */
-	hresize = (1024 * crop->width) / win->w.width;
+	hresize = (1024 * try_crop.width) / win->w.width;
 	if (cpu_is_omap24xx() && (hresize > 2048))
 		hresize = 2048;
 	else if (cpu_is_omap34xx() && (hresize > 4096))

drivers/media/video/omap3isp/isp.c

@@ -1748,7 +1748,7 @@ static int isp_register_entities(struct isp_device *isp)
 		goto done;
 
 	/* Register external entities */
-	for (subdevs = pdata->subdevs; subdevs->subdevs; ++subdevs) {
+	for (subdevs = pdata->subdevs; subdevs && subdevs->subdevs; ++subdevs) {
 		struct v4l2_subdev *sensor;
 		struct media_entity *input;
 		unsigned int flags;

drivers/media/video/pvrusb2/pvrusb2-hdw.c

@@ -3046,6 +3046,8 @@ static void pvr2_subdev_update(struct pvr2_hdw *hdw)
 	if (hdw->input_dirty || hdw->audiomode_dirty || hdw->force_dirty) {
 		struct v4l2_tuner vt;
 		memset(&vt, 0, sizeof(vt));
+		vt.type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ?
+			V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
 		vt.audmode = hdw->audiomode_val;
 		v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, s_tuner, &vt);
 	}
@@ -5171,6 +5173,8 @@ void pvr2_hdw_status_poll(struct pvr2_hdw *hdw)
 {
 	struct v4l2_tuner *vtp = &hdw->tuner_signal_info;
 	memset(vtp, 0, sizeof(*vtp));
+	vtp->type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ?
+		V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
 	hdw->tuner_signal_stale = 0;
 	/* Note: There apparently is no replacement for VIDIOC_CROPCAP
 	   using v4l2-subdev - therefore we can't support that AT ALL right

drivers/media/video/pwc/pwc-ctrl.c

@@ -1414,7 +1414,7 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	{
 		ARG_DEF(struct pwc_probe, probe)
 
-		strcpy(ARGR(probe).name, pdev->vdev->name);
+		strcpy(ARGR(probe).name, pdev->vdev.name);
 		ARGR(probe).type = pdev->type;
 		ARG_OUT(probe)
 		break;