mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-18 01:34:14 +08:00
Merge remote-tracking branches 'asoc/topic/nau8824', 'asoc/topic/nau8825' and 'asoc/topic/nuc900' into asoc-next
This commit is contained in:
commit
5d718e631a
@ -69,7 +69,7 @@ Optional properties:
|
||||
- nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
|
||||
- nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
|
||||
|
||||
- nuvoton,crosstalk-bypass: make crosstalk function bypass if set.
|
||||
- nuvoton,crosstalk-enable: make crosstalk function enable if set.
|
||||
|
||||
- clocks: list of phandle and clock specifier pairs according to common clock bindings for the
|
||||
clocks described in clock-names
|
||||
@ -98,7 +98,7 @@ Example:
|
||||
nuvoton,short-key-debounce = <2>;
|
||||
nuvoton,jack-insert-debounce = <7>;
|
||||
nuvoton,jack-eject-debounce = <7>;
|
||||
nuvoton,crosstalk-bypass;
|
||||
nuvoton,crosstalk-enable;
|
||||
|
||||
clock-names = "mclk";
|
||||
clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>;
|
||||
|
@ -43,7 +43,7 @@ static bool nau8824_is_jack_inserted(struct nau8824 *nau8824);
|
||||
|
||||
/* the parameter threshold of FLL */
|
||||
#define NAU_FREF_MAX 13500000
|
||||
#define NAU_FVCO_MAX 124000000
|
||||
#define NAU_FVCO_MAX 100000000
|
||||
#define NAU_FVCO_MIN 90000000
|
||||
|
||||
/* scaling for mclk from sysclk_src output */
|
||||
@ -811,7 +811,8 @@ static void nau8824_eject_jack(struct nau8824 *nau8824)
|
||||
NAU8824_JD_SLEEP_MODE, NAU8824_JD_SLEEP_MODE);
|
||||
|
||||
/* Close clock for jack type detection at manual mode */
|
||||
nau8824_config_sysclk(nau8824, NAU8824_CLK_DIS, 0);
|
||||
if (dapm->bias_level < SND_SOC_BIAS_PREPARE)
|
||||
nau8824_config_sysclk(nau8824, NAU8824_CLK_DIS, 0);
|
||||
}
|
||||
|
||||
static void nau8824_jdet_work(struct work_struct *work)
|
||||
@ -843,6 +844,11 @@ static void nau8824_jdet_work(struct work_struct *work)
|
||||
event_mask |= SND_JACK_HEADSET;
|
||||
snd_soc_jack_report(nau8824->jack, event, event_mask);
|
||||
|
||||
/* Enable short key press and release interruption. */
|
||||
regmap_update_bits(regmap, NAU8824_REG_INTERRUPT_SETTING,
|
||||
NAU8824_IRQ_KEY_RELEASE_DIS |
|
||||
NAU8824_IRQ_KEY_SHORT_PRESS_DIS, 0);
|
||||
|
||||
nau8824_sema_release(nau8824);
|
||||
}
|
||||
|
||||
@ -850,15 +856,15 @@ static void nau8824_setup_auto_irq(struct nau8824 *nau8824)
|
||||
{
|
||||
struct regmap *regmap = nau8824->regmap;
|
||||
|
||||
/* Enable jack ejection, short key press and release interruption. */
|
||||
/* Enable jack ejection interruption. */
|
||||
regmap_update_bits(regmap, NAU8824_REG_INTERRUPT_SETTING_1,
|
||||
NAU8824_IRQ_INSERT_EN | NAU8824_IRQ_EJECT_EN,
|
||||
NAU8824_IRQ_EJECT_EN);
|
||||
regmap_update_bits(regmap, NAU8824_REG_INTERRUPT_SETTING,
|
||||
NAU8824_IRQ_EJECT_DIS | NAU8824_IRQ_KEY_RELEASE_DIS |
|
||||
NAU8824_IRQ_KEY_SHORT_PRESS_DIS, 0);
|
||||
NAU8824_IRQ_EJECT_DIS, 0);
|
||||
/* Enable internal VCO needed for interruptions */
|
||||
nau8824_config_sysclk(nau8824, NAU8824_CLK_INTERNAL, 0);
|
||||
if (nau8824->dapm->bias_level < SND_SOC_BIAS_PREPARE)
|
||||
nau8824_config_sysclk(nau8824, NAU8824_CLK_INTERNAL, 0);
|
||||
regmap_update_bits(regmap, NAU8824_REG_ENA_CTRL,
|
||||
NAU8824_JD_SLEEP_MODE, 0);
|
||||
}
|
||||
|
@ -194,10 +194,10 @@ static const struct reg_default nau8825_reg_defaults[] = {
|
||||
|
||||
/* register backup table when cross talk detection */
|
||||
static struct reg_default nau8825_xtalk_baktab[] = {
|
||||
{ NAU8825_REG_ADC_DGAIN_CTRL, 0 },
|
||||
{ NAU8825_REG_ADC_DGAIN_CTRL, 0x00cf },
|
||||
{ NAU8825_REG_HSVOL_CTRL, 0 },
|
||||
{ NAU8825_REG_DACL_CTRL, 0 },
|
||||
{ NAU8825_REG_DACR_CTRL, 0 },
|
||||
{ NAU8825_REG_DACL_CTRL, 0x00cf },
|
||||
{ NAU8825_REG_DACR_CTRL, 0x02cf },
|
||||
};
|
||||
|
||||
static const unsigned short logtable[256] = {
|
||||
@ -245,13 +245,14 @@ static const unsigned short logtable[256] = {
|
||||
* tasks are allowed to acquire the semaphore, calling this function will
|
||||
* put the task to sleep. If the semaphore is not released within the
|
||||
* specified number of jiffies, this function returns.
|
||||
* Acquires the semaphore without jiffies. If no more tasks are allowed
|
||||
* to acquire the semaphore, calling this function will put the task to
|
||||
* sleep until the semaphore is released.
|
||||
* If the semaphore is not released within the specified number of jiffies,
|
||||
* this function returns -ETIME.
|
||||
* If the sleep is interrupted by a signal, this function will return -EINTR.
|
||||
* It returns 0 if the semaphore was acquired successfully.
|
||||
* this function returns -ETIME. If the sleep is interrupted by a signal,
|
||||
* this function will return -EINTR. It returns 0 if the semaphore was
|
||||
* acquired successfully.
|
||||
*
|
||||
* Acquires the semaphore without jiffies. Try to acquire the semaphore
|
||||
* atomically. Returns 0 if the semaphore has been acquired successfully
|
||||
* or 1 if it it cannot be acquired.
|
||||
*/
|
||||
static int nau8825_sema_acquire(struct nau8825 *nau8825, long timeout)
|
||||
{
|
||||
@ -262,8 +263,8 @@ static int nau8825_sema_acquire(struct nau8825 *nau8825, long timeout)
|
||||
if (ret < 0)
|
||||
dev_warn(nau8825->dev, "Acquire semaphore timeout\n");
|
||||
} else {
|
||||
ret = down_interruptible(&nau8825->xtalk_sem);
|
||||
if (ret < 0)
|
||||
ret = down_trylock(&nau8825->xtalk_sem);
|
||||
if (ret)
|
||||
dev_warn(nau8825->dev, "Acquire semaphore fail\n");
|
||||
}
|
||||
|
||||
@ -454,22 +455,32 @@ static void nau8825_xtalk_backup(struct nau8825 *nau8825)
|
||||
{
|
||||
int i;
|
||||
|
||||
if (nau8825->xtalk_baktab_initialized)
|
||||
return;
|
||||
|
||||
/* Backup some register values to backup table */
|
||||
for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++)
|
||||
regmap_read(nau8825->regmap, nau8825_xtalk_baktab[i].reg,
|
||||
&nau8825_xtalk_baktab[i].def);
|
||||
|
||||
nau8825->xtalk_baktab_initialized = true;
|
||||
}
|
||||
|
||||
static void nau8825_xtalk_restore(struct nau8825 *nau8825)
|
||||
static void nau8825_xtalk_restore(struct nau8825 *nau8825, bool cause_cancel)
|
||||
{
|
||||
int i, volume;
|
||||
|
||||
if (!nau8825->xtalk_baktab_initialized)
|
||||
return;
|
||||
|
||||
/* Restore register values from backup table; When the driver restores
|
||||
* the headphone volumem, it needs recover to original level gradually
|
||||
* with 3dB per step for less pop noise.
|
||||
* the headphone volume in XTALK_DONE state, it needs recover to
|
||||
* original level gradually with 3dB per step for less pop noise.
|
||||
* Otherwise, the restore should do ASAP.
|
||||
*/
|
||||
for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) {
|
||||
if (nau8825_xtalk_baktab[i].reg == NAU8825_REG_HSVOL_CTRL) {
|
||||
if (!cause_cancel && nau8825_xtalk_baktab[i].reg ==
|
||||
NAU8825_REG_HSVOL_CTRL) {
|
||||
/* Ramping up the volume change to reduce pop noise */
|
||||
volume = nau8825_xtalk_baktab[i].def &
|
||||
NAU8825_HPR_VOL_MASK;
|
||||
@ -479,6 +490,8 @@ static void nau8825_xtalk_restore(struct nau8825 *nau8825)
|
||||
regmap_write(nau8825->regmap, nau8825_xtalk_baktab[i].reg,
|
||||
nau8825_xtalk_baktab[i].def);
|
||||
}
|
||||
|
||||
nau8825->xtalk_baktab_initialized = false;
|
||||
}
|
||||
|
||||
static void nau8825_xtalk_prepare_dac(struct nau8825 *nau8825)
|
||||
@ -644,7 +657,7 @@ static void nau8825_xtalk_clean_adc(struct nau8825 *nau8825)
|
||||
NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, 0);
|
||||
}
|
||||
|
||||
static void nau8825_xtalk_clean(struct nau8825 *nau8825)
|
||||
static void nau8825_xtalk_clean(struct nau8825 *nau8825, bool cause_cancel)
|
||||
{
|
||||
/* Enable internal VCO needed for interruptions */
|
||||
nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0);
|
||||
@ -660,7 +673,7 @@ static void nau8825_xtalk_clean(struct nau8825 *nau8825)
|
||||
NAU8825_I2S_MS_MASK | NAU8825_I2S_LRC_DIV_MASK |
|
||||
NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_SLAVE);
|
||||
/* Restore value of specific register for cross talk */
|
||||
nau8825_xtalk_restore(nau8825);
|
||||
nau8825_xtalk_restore(nau8825, cause_cancel);
|
||||
}
|
||||
|
||||
static void nau8825_xtalk_imm_start(struct nau8825 *nau8825, int vol)
|
||||
@ -779,7 +792,7 @@ static void nau8825_xtalk_measure(struct nau8825 *nau8825)
|
||||
dev_dbg(nau8825->dev, "cross talk sidetone: %x\n", sidetone);
|
||||
regmap_write(nau8825->regmap, NAU8825_REG_DAC_DGAIN_CTRL,
|
||||
(sidetone << 8) | sidetone);
|
||||
nau8825_xtalk_clean(nau8825);
|
||||
nau8825_xtalk_clean(nau8825, false);
|
||||
nau8825->xtalk_state = NAU8825_XTALK_DONE;
|
||||
break;
|
||||
default:
|
||||
@ -815,13 +828,14 @@ static void nau8825_xtalk_work(struct work_struct *work)
|
||||
|
||||
static void nau8825_xtalk_cancel(struct nau8825 *nau8825)
|
||||
{
|
||||
/* If the xtalk_protect is true, that means the process is still
|
||||
* on going. The driver forces to cancel the cross talk task and
|
||||
/* If the crosstalk is eanbled and the process is on going,
|
||||
* the driver forces to cancel the crosstalk task and
|
||||
* restores the configuration to original status.
|
||||
*/
|
||||
if (nau8825->xtalk_protect) {
|
||||
if (nau8825->xtalk_enable && nau8825->xtalk_state !=
|
||||
NAU8825_XTALK_DONE) {
|
||||
cancel_work_sync(&nau8825->xtalk_work);
|
||||
nau8825_xtalk_clean(nau8825);
|
||||
nau8825_xtalk_clean(nau8825, true);
|
||||
}
|
||||
/* Reset parameters for cross talk suppression function */
|
||||
nau8825_sema_reset(nau8825);
|
||||
@ -1246,8 +1260,10 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream,
|
||||
regmap_read(nau8825->regmap, NAU8825_REG_DAC_CTRL1, &osr);
|
||||
osr &= NAU8825_DAC_OVERSAMPLE_MASK;
|
||||
if (nau8825_clock_check(nau8825, substream->stream,
|
||||
params_rate(params), osr))
|
||||
params_rate(params), osr)) {
|
||||
nau8825_sema_release(nau8825);
|
||||
return -EINVAL;
|
||||
}
|
||||
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
|
||||
NAU8825_CLK_DAC_SRC_MASK,
|
||||
osr_dac_sel[osr].clk_src << NAU8825_CLK_DAC_SRC_SFT);
|
||||
@ -1255,8 +1271,10 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream,
|
||||
regmap_read(nau8825->regmap, NAU8825_REG_ADC_RATE, &osr);
|
||||
osr &= NAU8825_ADC_SYNC_DOWN_MASK;
|
||||
if (nau8825_clock_check(nau8825, substream->stream,
|
||||
params_rate(params), osr))
|
||||
params_rate(params), osr)) {
|
||||
nau8825_sema_release(nau8825);
|
||||
return -EINVAL;
|
||||
}
|
||||
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
|
||||
NAU8825_CLK_ADC_SRC_MASK,
|
||||
osr_adc_sel[osr].clk_src << NAU8825_CLK_ADC_SRC_SFT);
|
||||
@ -1273,8 +1291,10 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream,
|
||||
bclk_div = 1;
|
||||
else if (bclk_fs <= 128)
|
||||
bclk_div = 0;
|
||||
else
|
||||
else {
|
||||
nau8825_sema_release(nau8825);
|
||||
return -EINVAL;
|
||||
}
|
||||
regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2,
|
||||
NAU8825_I2S_LRC_DIV_MASK | NAU8825_I2S_BLK_DIV_MASK,
|
||||
((bclk_div + 1) << NAU8825_I2S_LRC_DIV_SFT) | bclk_div);
|
||||
@ -1294,6 +1314,7 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream,
|
||||
val_len |= NAU8825_I2S_DL_32;
|
||||
break;
|
||||
default:
|
||||
nau8825_sema_release(nau8825);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
@ -1312,8 +1333,6 @@ static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
|
||||
struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec);
|
||||
unsigned int ctrl1_val = 0, ctrl2_val = 0;
|
||||
|
||||
nau8825_sema_acquire(nau8825, 3 * HZ);
|
||||
|
||||
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
||||
case SND_SOC_DAIFMT_CBM_CFM:
|
||||
ctrl2_val |= NAU8825_I2S_MS_MASTER;
|
||||
@ -1355,6 +1374,8 @@ static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
nau8825_sema_acquire(nau8825, 3 * HZ);
|
||||
|
||||
regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1,
|
||||
NAU8825_I2S_DL_MASK | NAU8825_I2S_DF_MASK |
|
||||
NAU8825_I2S_BP_MASK | NAU8825_I2S_PCMB_MASK,
|
||||
@ -1687,7 +1708,7 @@ static irqreturn_t nau8825_interrupt(int irq, void *data)
|
||||
} else if (active_irq & NAU8825_HEADSET_COMPLETION_IRQ) {
|
||||
if (nau8825_is_jack_inserted(regmap)) {
|
||||
event |= nau8825_jack_insert(nau8825);
|
||||
if (!nau8825->xtalk_bypass && !nau8825->high_imped) {
|
||||
if (nau8825->xtalk_enable && !nau8825->high_imped) {
|
||||
/* Apply the cross talk suppression in the
|
||||
* headset without high impedance.
|
||||
*/
|
||||
@ -1701,12 +1722,15 @@ static irqreturn_t nau8825_interrupt(int irq, void *data)
|
||||
int ret;
|
||||
nau8825->xtalk_protect = true;
|
||||
ret = nau8825_sema_acquire(nau8825, 0);
|
||||
if (ret < 0)
|
||||
if (ret)
|
||||
nau8825->xtalk_protect = false;
|
||||
}
|
||||
/* Startup cross talk detection process */
|
||||
nau8825->xtalk_state = NAU8825_XTALK_PREPARE;
|
||||
schedule_work(&nau8825->xtalk_work);
|
||||
if (nau8825->xtalk_protect) {
|
||||
nau8825->xtalk_state =
|
||||
NAU8825_XTALK_PREPARE;
|
||||
schedule_work(&nau8825->xtalk_work);
|
||||
}
|
||||
} else {
|
||||
/* The cross talk suppression shouldn't apply
|
||||
* in the headset with high impedance. Thus,
|
||||
@ -1733,7 +1757,9 @@ static irqreturn_t nau8825_interrupt(int irq, void *data)
|
||||
nau8825->xtalk_event_mask = event_mask;
|
||||
}
|
||||
} else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) {
|
||||
schedule_work(&nau8825->xtalk_work);
|
||||
/* crosstalk detection enable and process on going */
|
||||
if (nau8825->xtalk_enable && nau8825->xtalk_protect)
|
||||
schedule_work(&nau8825->xtalk_work);
|
||||
clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ;
|
||||
} else if ((active_irq & NAU8825_JACK_INSERTION_IRQ_MASK) ==
|
||||
NAU8825_JACK_INSERTION_DETECTED) {
|
||||
@ -2382,7 +2408,7 @@ static int __maybe_unused nau8825_resume(struct snd_soc_codec *codec)
|
||||
regcache_sync(nau8825->regmap);
|
||||
nau8825->xtalk_protect = true;
|
||||
ret = nau8825_sema_acquire(nau8825, 0);
|
||||
if (ret < 0)
|
||||
if (ret)
|
||||
nau8825->xtalk_protect = false;
|
||||
enable_irq(nau8825->irq);
|
||||
|
||||
@ -2441,8 +2467,8 @@ static void nau8825_print_device_properties(struct nau8825 *nau8825)
|
||||
nau8825->jack_insert_debounce);
|
||||
dev_dbg(dev, "jack-eject-debounce: %d\n",
|
||||
nau8825->jack_eject_debounce);
|
||||
dev_dbg(dev, "crosstalk-bypass: %d\n",
|
||||
nau8825->xtalk_bypass);
|
||||
dev_dbg(dev, "crosstalk-enable: %d\n",
|
||||
nau8825->xtalk_enable);
|
||||
}
|
||||
|
||||
static int nau8825_read_device_properties(struct device *dev,
|
||||
@ -2507,8 +2533,8 @@ static int nau8825_read_device_properties(struct device *dev,
|
||||
&nau8825->jack_eject_debounce);
|
||||
if (ret)
|
||||
nau8825->jack_eject_debounce = 0;
|
||||
nau8825->xtalk_bypass = device_property_read_bool(dev,
|
||||
"nuvoton,crosstalk-bypass");
|
||||
nau8825->xtalk_enable = device_property_read_bool(dev,
|
||||
"nuvoton,crosstalk-enable");
|
||||
|
||||
nau8825->mclk = devm_clk_get(dev, "mclk");
|
||||
if (PTR_ERR(nau8825->mclk) == -EPROBE_DEFER) {
|
||||
@ -2569,6 +2595,7 @@ static int nau8825_i2c_probe(struct i2c_client *i2c,
|
||||
*/
|
||||
nau8825->xtalk_state = NAU8825_XTALK_DONE;
|
||||
nau8825->xtalk_protect = false;
|
||||
nau8825->xtalk_baktab_initialized = false;
|
||||
sema_init(&nau8825->xtalk_sem, 1);
|
||||
INIT_WORK(&nau8825->xtalk_work, nau8825_xtalk_work);
|
||||
|
||||
|
@ -476,7 +476,8 @@ struct nau8825 {
|
||||
int xtalk_event_mask;
|
||||
bool xtalk_protect;
|
||||
int imp_rms[NAU8825_XTALK_IMM];
|
||||
int xtalk_bypass;
|
||||
int xtalk_enable;
|
||||
bool xtalk_baktab_initialized; /* True if initialized. */
|
||||
};
|
||||
|
||||
int nau8825_enable_jack_detect(struct snd_soc_codec *codec,
|
||||
|
@ -67,7 +67,7 @@ static unsigned short nuc900_ac97_read(struct snd_ac97 *ac97,
|
||||
|
||||
/* polling the AC_R_FINISH */
|
||||
while (!(AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_R_FINISH)
|
||||
&& timeout--)
|
||||
&& --timeout)
|
||||
mdelay(1);
|
||||
|
||||
if (!timeout) {
|
||||
@ -121,7 +121,7 @@ static void nuc900_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
|
||||
|
||||
/* polling the AC_W_FINISH */
|
||||
while ((AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_W_FINISH)
|
||||
&& timeout--)
|
||||
&& --timeout)
|
||||
mdelay(1);
|
||||
|
||||
if (!timeout)
|
||||
@ -345,11 +345,10 @@ static int nuc900_ac97_drvprobe(struct platform_device *pdev)
|
||||
goto out;
|
||||
}
|
||||
|
||||
nuc900_audio->irq_num = platform_get_irq(pdev, 0);
|
||||
if (!nuc900_audio->irq_num) {
|
||||
ret = -EBUSY;
|
||||
ret = platform_get_irq(pdev, 0);
|
||||
if (ret < 0)
|
||||
goto out;
|
||||
}
|
||||
nuc900_audio->irq_num = ret;
|
||||
|
||||
nuc900_ac97_data = nuc900_audio;
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user