korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-11 12:28:41 +08:00
Code Issues Packages Projects Releases Wiki Activity

- Use the newly introduced 'hot' and 'critical' ops for the acpi

Browse Source 
thermal driver (Daniel Lezcano)
 
 - Remove the notify ops as it is no longer used (Daniel Lezcano)
 
 - Remove the 'forced passive' option and the unused bind/unbind
   functions (Daniel Lezcano)
 
 - Remove the THERMAL_TRIPS_NONE and the code cleanup around this
   macro (Daniel Lezcano)
 
 - Rework the delays to make them pre-computed instead of computing
   them again and again at each polling interval (Daniel Lezcano)
 
 - Remove the pointless 'thermal_zone_device_reset' function (Daniel
   Lezcano)
 
 - Use the critical and hot ops to prevent an unexpected system
   shutdown on int340x (Kai-Heng Feng)
 
 - Make the cooling device state private to the thermal subsystem
   (Daniel Lezcano)
 
 - Prevent to use not-power-aware actor devices with the power
   allocator governor (Lukasz Luba)
 
 - Remove 'zx' and 'tango' support along with the corresponding
   platforms (Arnd Bergman)
 
 - Fix several issues on the Omap thermal driver (Tony Lindgren)
 
 - Add support for adc-tm5 PMIC thermal monitor for Qcom
   platforms. Please note those changes rely on an immutable branch:
   iio-thermal-5.11-rc1/ib-iio-thermal-5.11-rc1 from the iio tree
   (Dmitry Baryshkov)
 
 - Fix an initialization loop in the adc-tm5 (Colin Ian King)
 
 - Fix a return error check in the cpufreq cooling device (Viresh Kumar)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmAvkKMACgkQqDIjiipP
 6E9yFggAmXy8t2j1mRvn/KLU+teTGIoSFkZ8mBnY2Sgip97IRZRhCwAZbUKOW0eI
 bvpAzBjacxdZHT7OxxvGzCOq/zlAh4UoStI8bMpzdUWPdkAj4ippArLYGvagLym8
 WEQysWnrr8V1RCZbQuBNjyLwjf0fcXkzIBU1mbZXA8T8Y6Yn646TdtsrVT4Idg1j
 MOg7PAHBcTSY/wOReZKJ5TB1yvo2tNOuGOqUVbrIAHlRkiNTVHirVUq6aZGtTTKp
 7ukcu8EI/o7XKBdQ5d9MZaHdwkcyAIJj4jdjmjkUJpa8VYQFPjayNyN3I+Py9lH2
 jtWVYHQxZbY166IZP2yeXFjPzd6elw==
 =Jmz4
 -----END PGP SIGNATURE-----

Merge tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Use the newly introduced 'hot' and 'critical' ops for the acpi
   thermal driver (Daniel Lezcano)

 - Remove the notify ops as it is no longer used (Daniel Lezcano)

 - Remove the 'forced passive' option and the unused bind/unbind
   functions (Daniel Lezcano)

 - Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro
   (Daniel Lezcano)

 - Rework the delays to make them pre-computed instead of computing them
   again and again at each polling interval (Daniel Lezcano)

 - Remove the pointless 'thermal_zone_device_reset' function (Daniel
   Lezcano)

 - Use the critical and hot ops to prevent an unexpected system shutdown
   on int340x (Kai-Heng Feng)

 - Make the cooling device state private to the thermal subsystem
   (Daniel Lezcano)

 - Prevent to use not-power-aware actor devices with the power allocator
   governor (Lukasz Luba)

 - Remove 'zx' and 'tango' support along with the corresponding
   platforms (Arnd Bergman)

 - Fix several issues on the Omap thermal driver (Tony Lindgren)

 - Add support for adc-tm5 PMIC thermal monitor for Qcom platforms
   (Dmitry Baryshkov)

 - Fix an initialization loop in the adc-tm5 (Colin Ian King)

 - Fix a return error check in the cpufreq cooling device (Viresh Kumar)

* tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
  thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error
  thermal: qcom: Fix comparison with uninitialized variable channels_available
  thermal: qcom: add support for adc-tm5 PMIC thermal monitor
  dt-bindings: thermal: qcom: add adc-thermal monitor bindings
  thermal: ti-soc-thermal: Use non-inverted define for omap4
  thermal: ti-soc-thermal: Simplify polling with iopoll
  thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  thermal: ti-soc-thermal: Skip pointless register access for dra7
  thermal/drivers/zx: Remove zx driver
  thermal/drivers/tango: Remove tango driver
  thermal: power allocator: fail binding for non-power actor devices
  thermal/core: Make cooling device state change private
  thermal: intel: pch: Fix unexpected shutdown at critical temperature
  thermal: int340x: Fix unexpected shutdown at critical temperature
  thermal/core: Remove pointless thermal_zone_device_reset() function
  thermal/core: Remove ms based delay fields
  thermal/core: Use precomputed jiffies for the polling
  thermal/core: Precompute the delays from msecs to jiffies
  thermal/core: Remove unused macro THERMAL_TRIPS_NONE
  thermal/core: Remove THERMAL_TRIPS_NONE test
  ...
This commit is contained in:
Linus Torvalds 2021-02-22 09:39:11 -08:00
commit 5d26c176d5
33 changed files with 978 additions and 795 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

153
Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml Normal file
View File

@ -0,0 +1,153 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm5.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm's SPMI PMIC ADC Thermal Monitoring
maintainers:
- Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
properties:
compatible:
const: qcom,spmi-adc-tm5
reg:
maxItems: 1
interrupts:
maxItems: 1
"#thermal-sensor-cells":
const: 1
description:
Number of cells required to uniquely identify the thermal sensors. Since
we have multiple sensors this is set to 1
"#address-cells":
const: 1
"#size-cells":
const: 0
qcom,avg-samples:
$ref: /schemas/types.yaml#/definitions/uint32
description: Number of samples to be used for measurement.
enum:
- 1
- 2
- 4
- 8
- 16
default: 1
qcom,decimation:
$ref: /schemas/types.yaml#/definitions/uint32
description: This parameter is used to decrease ADC sampling rate.
Quicker measurements can be made by reducing decimation ratio.
enum:
- 250
- 420
- 840
default: 840
patternProperties:
"^([-a-z0-9]*)@[0-7]$":
type: object
description:
Represent one thermal sensor.
properties:
reg:
$ref: /schemas/types.yaml#/definitions/uint32
description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM
minimum: 0
maximum: 7
io-channels:
description:
From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor
qcom,ratiometric:
$ref: /schemas/types.yaml#/definitions/flag
description:
Channel calibration type.
If this property is specified VADC will use the VDD reference
(1.875V) and GND for channel calibration. If property is not found,
channel will be calibrated with 0V and 1.25V reference channels,
also known as absolute calibration.
qcom,hw-settle-time-us:
$ref: /schemas/types.yaml#/definitions/uint32
description: Time between AMUX getting configured and the ADC starting conversion.
enum: [15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000]
qcom,pre-scaling:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: Used for scaling the channel input signal before the
signal is fed to VADC. The configuration for this node is to know the
pre-determined ratio and use it for post scaling. It is a pair of
integers, denoting the numerator and denominator of the fraction by
which input signal is multiplied. For example, <1 3> indicates the
signal is scaled down to 1/3 of its value before ADC measurement. If
property is not found default value depending on chip will be used.
items:
- const: 1
- enum: [ 1, 3, 4, 6, 20, 8, 10 ]
required:
- reg
- io-channels
additionalProperties:
false
required:
- compatible
- reg
- interrupts
- "#address-cells"
- "#size-cells"
- "#thermal-sensor-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
spmi_bus {
#address-cells = <1>;
#size-cells = <0>;
pm8150b_adc: adc@3100 {
reg = <0x3100>;
compatible = "qcom,spmi-adc5";
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
/* Other propreties are omitted */
conn-therm@4f {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
};
pm8150b_adc_tm: adc-tm@3500 {
compatible = "qcom,spmi-adc-tm5";
reg = <0x3500>;
interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
conn-therm@0 {
reg = <0>;
io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
};
...

17
Documentation/devicetree/bindings/thermal/tango-thermal.txt
View File

@ -1,17 +0,0 @@
* Tango Thermal
The SMP8758 SoC includes 3 instances of this temperature sensor
(in the CPU, video decoder, and PCIe controller).
Required properties:
- #thermal-sensor-cells: Should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml)
- compatible: "sigma,smp8758-thermal"
- reg: Address range of the thermal registers
Example:
cpu_temp: thermal@920100 {
#thermal-sensor-cells = <0>;
compatible = "sigma,smp8758-thermal";
reg = <0x920100 12>;
};

116
Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
View File

@ -1,116 +0,0 @@
* ZTE zx2967 family Thermal
Required Properties:
- compatible: should be one of the following.
* zte,zx296718-thermal
- reg: physical base address of the controller and length of memory mapped
region.
- clocks : Pairs of phandle and specifier referencing the controller's clocks.
- clock-names: "topcrm" for the topcrm clock.
"apb" for the apb clock.
- #thermal-sensor-cells: must be 0.
Please note: slope coefficient defined in thermal-zones section need to be
multiplied by 1000.
Example for tempsensor:
tempsensor: tempsensor@148a000 {
compatible = "zte,zx296718-thermal";
reg = <0x0148a000 0x20>;
clocks = <&topcrm TEMPSENSOR_GATE>, <&audiocrm AUDIO_TS_PCLK>;
clock-names = "topcrm", "apb";
#thermal-sensor-cells = <0>;
};
Example for cooling device:
cooling_dev: cooling_dev {
cluster0_cooling_dev: cluster0-cooling-dev {
#cooling-cells = <2>;
cpumask = <0xf>;
capacitance = <1500>;
};
cluster1_cooling_dev: cluster1-cooling-dev {
#cooling-cells = <2>;
cpumask = <0x30>;
capacitance = <2000>;
};
};
Example for thermal zones:
thermal-zones {
zx296718_thermal: zx296718_thermal {
polling-delay-passive = <500>;
polling-delay = <1000>;
sustainable-power = <6500>;
thermal-sensors = <&tempsensor 0>;
/*
* slope need to be multiplied by 1000.
*/
coefficients = <1951 (-922)>;
trips {
trip0: switch_on_temperature {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
trip1: desired_temperature {
temperature = <100000>;
hysteresis = <2000>;
type = "passive";
};
crit: critical_temperature {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&trip0>;
cooling-device = <&gpu 2 5>;
};
map1 {
trip = <&trip0>;
cooling-device = <&cluster0_cooling_dev 1 2>;
};
map2 {
trip = <&trip1>;
cooling-device = <&cluster0_cooling_dev 1 2>;
};
map3 {
trip = <&crit>;
cooling-device = <&cluster0_cooling_dev 1 2>;
};
map4 {
trip = <&trip0>;
cooling-device = <&cluster1_cooling_dev 1 2>;
contribution = <9000>;
};
map5 {
trip = <&trip1>;
cooling-device = <&cluster1_cooling_dev 1 2>;
contribution = <4096>;
};
map6 {
trip = <&crit>;
cooling-device = <&cluster1_cooling_dev 1 2>;
contribution = <4096>;
};
};
};
};

13
Documentation/driver-api/thermal/sysfs-api.rst
View File

@ -520,19 +520,6 @@ available_policies
RW, Optional
passive
Attribute is only present for zones in which the passive cooling
policy is not supported by native thermal driver. Default is zero
and can be set to a temperature (in millidegrees) to enable a
passive trip point for the zone. Activation is done by polling with
an interval of 1 second.
Unit: millidegrees Celsius
Valid values: 0 (disabled) or greater than 1000
RW, Optional
emul_temp
Interface to set the emulated temperature method in thermal zone
(sensor). After setting this temperature, the thermal zone may pass

49
drivers/acpi/thermal.c
View File

@ -670,27 +670,24 @@ static int thermal_get_trend(struct thermal_zone_device *thermal,
return 0;
}
static int thermal_notify(struct thermal_zone_device *thermal, int trip,
enum thermal_trip_type trip_type)
static void acpi_thermal_zone_device_hot(struct thermal_zone_device *thermal)
{
u8 type = 0;
struct acpi_thermal *tz = thermal->devdata;
if (trip_type == THERMAL_TRIP_CRITICAL)
type = ACPI_THERMAL_NOTIFY_CRITICAL;
else if (trip_type == THERMAL_TRIP_HOT)
type = ACPI_THERMAL_NOTIFY_HOT;
else
return 0;
acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
dev_name(&tz->device->dev),
ACPI_THERMAL_NOTIFY_HOT, 1);
}
static void acpi_thermal_zone_device_critical(struct thermal_zone_device *thermal)
{
struct acpi_thermal *tz = thermal->devdata;
acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
dev_name(&tz->device->dev), type, 1);
dev_name(&tz->device->dev),
ACPI_THERMAL_NOTIFY_CRITICAL, 1);
if (trip_type == THERMAL_TRIP_CRITICAL && nocrt)
return 1;
return 0;
thermal_zone_device_critical(thermal);
}
static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
@ -760,25 +757,6 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
}
}
for (i = 0; i < tz->devices.count; i++) {
handle = tz->devices.handles[i];
status = acpi_bus_get_device(handle, &dev);
if (ACPI_SUCCESS(status) && (dev == device)) {
if (bind)
result = thermal_zone_bind_cooling_device
(thermal, THERMAL_TRIPS_NONE,
cdev, THERMAL_NO_LIMIT,
THERMAL_NO_LIMIT,
THERMAL_WEIGHT_DEFAULT);
else
result = thermal_zone_unbind_cooling_device
(thermal, THERMAL_TRIPS_NONE,
cdev);
if (result)
goto failed;
}
}
failed:
return result;
}
@ -805,7 +783,8 @@ static struct thermal_zone_device_ops acpi_thermal_zone_ops = {
.get_trip_temp = thermal_get_trip_temp,
.get_crit_temp = thermal_get_crit_temp,
.get_trend = thermal_get_trend,
.notify = thermal_notify,
.hot = acpi_thermal_zone_device_hot,
.critical = acpi_thermal_zone_device_critical,
};
static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)

1
drivers/hwmon/pwm-fan.c
View File

@ -458,7 +458,6 @@ static int pwm_fan_probe(struct platform_device *pdev)
return ret;
}
ctx->cdev = cdev;
thermal_cdev_update(cdev);
}
return 0;

50
drivers/iio/adc/qcom-vadc-common.c
View File

@ -368,6 +368,28 @@ static int qcom_vadc_map_voltage_temp(const struct vadc_map_pt *pts,
return 0;
}
static s32 qcom_vadc_map_temp_voltage(const struct vadc_map_pt *pts,
u32 tablesize, int input)
{
u32 i = 0;
/*
* Table must be sorted, find the interval of 'y' which contains value
* 'input' and map it to proper 'x' value
*/
while (i < tablesize && pts[i].y < input)
i++;
if (i == 0)
return pts[0].x;
if (i == tablesize)
return pts[tablesize - 1].x;
/* interpolate linearly */
return fixp_linear_interpolate(pts[i - 1].y, pts[i - 1].x,
pts[i].y, pts[i].x, input);
}
static void qcom_vadc_scale_calib(const struct vadc_linear_graph *calib_graph,
u16 adc_code,
bool absolute,
@ -463,6 +485,21 @@ static int qcom_vadc_scale_chg_temp(const struct vadc_linear_graph *calib_graph,
return 0;
}
/* convert voltage to ADC code, using 1.875V reference */
static u16 qcom_vadc_scale_voltage_code(s32 voltage,
const struct vadc_prescale_ratio *prescale,
const u32 full_scale_code_volt,
unsigned int factor)
{
s64 volt = voltage;
s64 adc_vdd_ref_mv = 1875; /* reference voltage */
volt *= prescale->num * factor * full_scale_code_volt;
volt = div64_s64(volt, (s64)prescale->den * adc_vdd_ref_mv * 1000);
return volt;
}
static int qcom_vadc_scale_code_voltage_factor(u16 adc_code,
const struct vadc_prescale_ratio *prescale,
const struct adc5_data *data,
@ -627,6 +664,19 @@ int qcom_vadc_scale(enum vadc_scale_fn_type scaletype,
}
EXPORT_SYMBOL(qcom_vadc_scale);
u16 qcom_adc_tm5_temp_volt_scale(unsigned int prescale_ratio,
u32 full_scale_code_volt, int temp)
{
const struct vadc_prescale_ratio *prescale = &adc5_prescale_ratios[prescale_ratio];
s32 voltage;
voltage = qcom_vadc_map_temp_voltage(adcmap_100k_104ef_104fb_1875_vref,
ARRAY_SIZE(adcmap_100k_104ef_104fb_1875_vref),
temp);
return qcom_vadc_scale_voltage_code(voltage, prescale, full_scale_code_volt, 1000);
}
EXPORT_SYMBOL(qcom_adc_tm5_temp_volt_scale);
int qcom_adc5_hw_scale(enum vadc_scale_fn_type scaletype,
unsigned int prescale_ratio,
const struct adc5_data *data,

3
drivers/platform/x86/acerhdf.c
View File

@ -336,7 +336,8 @@ static void acerhdf_check_param(struct thermal_zone_device *thermal)
pr_notice("interval changed to: %d\n", interval);
if (thermal)
thermal->polling_delay = interval*1000;
thermal->polling_delay_jiffies =
round_jiffies(msecs_to_jiffies(interval * 1000));
prev_interval = interval;
}

17
drivers/thermal/Kconfig
View File

@ -450,15 +450,6 @@ depends on (ARCH_STI || ARCH_STM32) && OF
source "drivers/thermal/st/Kconfig"
endmenu
config TANGO_THERMAL
tristate "Tango thermal management"
depends on ARCH_TANGO || COMPILE_TEST
help
Enable the Tango thermal driver, which supports the primitive
temperature sensor embedded in Tango chips since the SMP8758.
This sensor only generates a 1-bit signal to indicate whether
the die temperature exceeds a programmable threshold.
source "drivers/thermal/tegra/Kconfig"
config GENERIC_ADC_THERMAL
@ -476,14 +467,6 @@ depends on (ARCH_QCOM && OF) || COMPILE_TEST
source "drivers/thermal/qcom/Kconfig"
endmenu
config ZX2967_THERMAL
tristate "Thermal sensors on zx2967 SoC"
depends on ARCH_ZX || COMPILE_TEST
help
Enable the zx2967 thermal sensors driver, which supports
the primitive temperature sensor embedded in zx2967 SoCs.
This sensor generates the real time die temperature.
config UNIPHIER_THERMAL
tristate "Socionext UniPhier thermal driver"
depends on ARCH_UNIPHIER || COMPILE_TEST

2
drivers/thermal/Makefile
View File

@ -42,7 +42,6 @@ obj-y += samsung/
obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o
obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o
obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
obj-$(CONFIG_IMX_SC_THERMAL) += imx_sc_thermal.o
obj-$(CONFIG_IMX8MM_THERMAL) += imx8mm_thermal.o
@ -57,7 +56,6 @@ obj-y += tegra/
obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o
obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o
obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o
obj-$(CONFIG_SPRD_THERMAL) += sprd_thermal.o

2
drivers/thermal/cpufreq_cooling.c
View File

@ -485,7 +485,7 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
frequency = get_state_freq(cpufreq_cdev, state);
ret = freq_qos_update_request(&cpufreq_cdev->qos_req, frequency);
if (ret > 0) {
if (ret >= 0) {
cpufreq_cdev->cpufreq_state = state;
cpus = cpufreq_cdev->policy->cpus;
max_capacity = arch_scale_cpu_capacity(cpumask_first(cpus));

4
drivers/thermal/da9062-thermal.c
View File

@ -95,7 +95,7 @@ static void da9062_thermal_poll_on(struct work_struct *work)
thermal_zone_device_update(thermal->zone,
THERMAL_EVENT_UNSPECIFIED);
delay = msecs_to_jiffies(thermal->zone->passive_delay);
delay = thermal->zone->passive_delay_jiffies;
queue_delayed_work(system_freezable_wq, &thermal->work, delay);
return;
}
@ -245,7 +245,7 @@ static int da9062_thermal_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev,
"TJUNC temperature polling period set at %d ms\n",
thermal->zone->passive_delay);
jiffies_to_msecs(thermal->zone->passive_delay_jiffies));
ret = platform_get_irq_byname(pdev, "THERMAL");
if (ret < 0) {

37
drivers/thermal/gov_power_allocator.c
View File

@ -258,7 +258,7 @@ static u32 pid_controller(struct thermal_zone_device *tz,
* power being applied, slowing down the controller)
*/
d = mul_frac(tz->tzp->k_d, err - params->prev_err);
d = div_frac(d, tz->passive_delay);
d = div_frac(d, jiffies_to_msecs(tz->passive_delay_jiffies));
params->prev_err = err;
power_range = p + i + d;
@ -589,6 +589,34 @@ static void allow_maximum_power(struct thermal_zone_device *tz)
mutex_unlock(&tz->lock);
}
/**
* check_power_actors() - Check all cooling devices and warn when they are
* not power actors
* @tz: thermal zone to operate on
*
* Check all cooling devices in the @tz and warn every time they are missing
* power actor API. The warning should help to investigate the issue, which
* could be e.g. lack of Energy Model for a given device.
*
* Return: 0 on success, -EINVAL if any cooling device does not implement
* the power actor API.
*/
static int check_power_actors(struct thermal_zone_device *tz)
{
struct thermal_instance *instance;
int ret = 0;
list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
if (!cdev_is_power_actor(instance->cdev)) {
dev_warn(&tz->device, "power_allocator: %s is not a power actor\n",
instance->cdev->type);
ret = -EINVAL;
}
}
return ret;
}
/**
* power_allocator_bind() - bind the power_allocator governor to a thermal zone
* @tz: thermal zone to bind it to
@ -596,7 +624,8 @@ static void allow_maximum_power(struct thermal_zone_device *tz)
* Initialize the PID controller parameters and bind it to the thermal
* zone.
*
* Return: 0 on success, or -ENOMEM if we ran out of memory.
* Return: 0 on success, or -ENOMEM if we ran out of memory, or -EINVAL
* when there are unsupported cooling devices in the @tz.
*/
static int power_allocator_bind(struct thermal_zone_device *tz)
{
@ -604,6 +633,10 @@ static int power_allocator_bind(struct thermal_zone_device *tz)
struct power_allocator_params *params;
int control_temp;
ret = check_power_actors(tz);
if (ret)
return ret;
params = kzalloc(sizeof(*params), GFP_KERNEL);
if (!params)
return -ENOMEM;

14
drivers/thermal/gov_step_wise.c
View File

@ -109,7 +109,7 @@ static void update_passive_instance(struct thermal_zone_device *tz,
* If value is +1, activate a passive instance.
* If value is -1, deactivate a passive instance.
*/
if (type == THERMAL_TRIP_PASSIVE || type == THERMAL_TRIPS_NONE)
if (type == THERMAL_TRIP_PASSIVE)
tz->passive += value;
}
@ -122,13 +122,8 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
bool throttle = false;
int old_target;
if (trip == THERMAL_TRIPS_NONE) {
trip_temp = tz->forced_passive;
trip_type = THERMAL_TRIPS_NONE;
} else {
tz->ops->get_trip_temp(tz, trip, &trip_temp);
tz->ops->get_trip_type(tz, trip, &trip_type);
}
tz->ops->get_trip_temp(tz, trip, &trip_temp);
tz->ops->get_trip_type(tz, trip, &trip_type);
trend = get_tz_trend(tz, trip);
@ -189,9 +184,6 @@ static int step_wise_throttle(struct thermal_zone_device *tz, int trip)
thermal_zone_trip_update(tz, trip);
if (tz->forced_passive)
thermal_zone_trip_update(tz, THERMAL_TRIPS_NONE);
mutex_lock(&tz->lock);
list_for_each_entry(instance, &tz->thermal_instances, tz_node)

6
drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
View File

@ -146,12 +146,18 @@ static int int340x_thermal_get_trip_hyst(struct thermal_zone_device *zone,
return 0;
}
static void int340x_thermal_critical(struct thermal_zone_device *zone)
{
dev_dbg(&zone->device, "%s: critical temperature reached\n", zone->type);
}
static struct thermal_zone_device_ops int340x_thermal_zone_ops = {
.get_temp = int340x_thermal_get_zone_temp,
.get_trip_temp = int340x_thermal_get_trip_temp,
.get_trip_type = int340x_thermal_get_trip_type,
.set_trip_temp = int340x_thermal_set_trip_temp,
.get_trip_hyst = int340x_thermal_get_trip_hyst,
.critical = int340x_thermal_critical,
};
static int int340x_thermal_get_trip_config(acpi_handle handle, char *name,

6
drivers/thermal/intel/intel_pch_thermal.c
View File

@ -326,10 +326,16 @@ static int pch_get_trip_temp(struct thermal_zone_device *tzd, int trip, int *tem
return 0;
}
static void pch_critical(struct thermal_zone_device *tzd)
{
dev_dbg(&tzd->device, "%s: critical temperature reached\n", tzd->type);
}
static struct thermal_zone_device_ops tzd_ops = {
.get_temp = pch_thermal_get_temp,
.get_trip_type = pch_get_trip_type,
.get_trip_temp = pch_get_trip_temp,
.critical = pch_critical,
};
enum board_ids {

1
drivers/thermal/khadas_mcu_fan.c
View File

@ -100,7 +100,6 @@ static int khadas_mcu_fan_probe(struct platform_device *pdev)
return ret;
}
ctx->cdev = cdev;
thermal_cdev_update(cdev);
return 0;
}

11
drivers/thermal/qcom/Kconfig
View File

@ -10,6 +10,17 @@ config QCOM_TSENS
Also able to set threshold temperature for both hot and cold and update
when a threshold is reached.
config QCOM_SPMI_ADC_TM5
tristate "Qualcomm SPMI PMIC Thermal Monitor ADC5"
depends on OF && SPMI && IIO
select REGMAP_SPMI
select QCOM_VADC_COMMON
help
This enables the thermal driver for the ADC thermal monitoring
device. It shows up as a thermal zone with multiple trip points.
Thermal client sets threshold temperature for both warm and cool and
gets updated when a threshold is reached.
config QCOM_SPMI_TEMP_ALARM
tristate "Qualcomm SPMI PMIC Temperature Alarm"
depends on OF && SPMI && IIO

1
drivers/thermal/qcom/Makefile
View File

@ -3,4 +3,5 @@ obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
qcom_tsens-y += tsens.o tsens-v2.o tsens-v1.o tsens-v0_1.o \
tsens-8960.o
obj-$(CONFIG_QCOM_SPMI_ADC_TM5) += qcom-spmi-adc-tm5.o
obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o

623
drivers/thermal/qcom/qcom-spmi-adc-tm5.c Normal file
View File

@ -0,0 +1,623 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2020 Linaro Limited
*
* Based on original driver:
* Copyright (c) 2012-2020, The Linux Foundation. All rights reserved.
*/
#include <linux/bitfield.h>
#include <linux/iio/adc/qcom-vadc-common.h>
#include <linux/iio/consumer.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/thermal.h>
/*
* Thermal monitoring block consists of 8 (ADC_TM5_NUM_CHANNELS) channels. Each
* channel is programmed to use one of ADC channels for voltage comparison.
* Voltages are programmed using ADC codes, so we have to convert temp to
* voltage and then to ADC code value.
*
* Configuration of TM channels must match configuration of corresponding ADC
* channels.
*/
#define ADC5_MAX_CHANNEL 0xc0
#define ADC_TM5_NUM_CHANNELS 8
#define ADC_TM5_STATUS_LOW 0x0a
#define ADC_TM5_STATUS_HIGH 0x0b
#define ADC_TM5_NUM_BTM 0x0f
#define ADC_TM5_ADC_DIG_PARAM 0x42
#define ADC_TM5_FAST_AVG_CTL (ADC_TM5_ADC_DIG_PARAM + 1)
#define ADC_TM5_FAST_AVG_EN BIT(7)
#define ADC_TM5_MEAS_INTERVAL_CTL (ADC_TM5_ADC_DIG_PARAM + 2)
#define ADC_TM5_TIMER1 3 /* 3.9ms */
#define ADC_TM5_MEAS_INTERVAL_CTL2 (ADC_TM5_ADC_DIG_PARAM + 3)
#define ADC_TM5_MEAS_INTERVAL_CTL2_MASK 0xf0
#define ADC_TM5_TIMER2 10 /* 1 second */
#define ADC_TM5_MEAS_INTERVAL_CTL3_MASK 0xf
#define ADC_TM5_TIMER3 4 /* 4 second */
#define ADC_TM_EN_CTL1 0x46
#define ADC_TM_EN BIT(7)
#define ADC_TM_CONV_REQ 0x47
#define ADC_TM_CONV_REQ_EN BIT(7)
#define ADC_TM5_M_CHAN_BASE 0x60
#define ADC_TM5_M_ADC_CH_SEL_CTL(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 0)
#define ADC_TM5_M_LOW_THR0(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 1)
#define ADC_TM5_M_LOW_THR1(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 2)
#define ADC_TM5_M_HIGH_THR0(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 3)
#define ADC_TM5_M_HIGH_THR1(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 4)
#define ADC_TM5_M_MEAS_INTERVAL_CTL(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 5)
#define ADC_TM5_M_CTL(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 6)
#define ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK 0xf
#define ADC_TM5_M_CTL_CAL_SEL_MASK 0x30
#define ADC_TM5_M_CTL_CAL_VAL 0x40
#define ADC_TM5_M_EN(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 7)
#define ADC_TM5_M_MEAS_EN BIT(7)
#define ADC_TM5_M_HIGH_THR_INT_EN BIT(1)
#define ADC_TM5_M_LOW_THR_INT_EN BIT(0)
enum adc5_timer_select {
ADC5_TIMER_SEL_1 = 0,
ADC5_TIMER_SEL_2,
ADC5_TIMER_SEL_3,
ADC5_TIMER_SEL_NONE,
};
struct adc_tm5_data {
const u32 full_scale_code_volt;
unsigned int *decimation;
unsigned int *hw_settle;
};
enum adc_tm5_cal_method {
ADC_TM5_NO_CAL = 0,
ADC_TM5_RATIOMETRIC_CAL,
ADC_TM5_ABSOLUTE_CAL
};
struct adc_tm5_chip;
/**
* struct adc_tm5_channel - ADC Thermal Monitoring channel data.
* @channel: channel number.
* @adc_channel: corresponding ADC channel number.
* @cal_method: calibration method.
* @prescale: channel scaling performed on the input signal.
* @hw_settle_time: the time between AMUX being configured and the
* start of conversion.
* @iio: IIO channel instance used by this channel.
* @chip: ADC TM chip instance.
* @tzd: thermal zone device used by this channel.
*/
struct adc_tm5_channel {
unsigned int channel;
unsigned int adc_channel;
enum adc_tm5_cal_method cal_method;
unsigned int prescale;
unsigned int hw_settle_time;
struct iio_channel *iio;
struct adc_tm5_chip *chip;
struct thermal_zone_device *tzd;
};
/**
* struct adc_tm5_chip - ADC Thermal Monitoring properties
* @regmap: SPMI ADC5 Thermal Monitoring peripheral register map field.
* @dev: SPMI ADC5 device.
* @data: software configuration data.
* @channels: array of ADC TM channel data.
* @nchannels: amount of channels defined/allocated
* @decimation: sampling rate supported for the channel.
* @avg_samples: ability to provide single result from the ADC
* that is an average of multiple measurements.
* @base: base address of TM registers.
*/
struct adc_tm5_chip {
struct regmap *regmap;
struct device *dev;
const struct adc_tm5_data *data;
struct adc_tm5_channel *channels;
unsigned int nchannels;
unsigned int decimation;
unsigned int avg_samples;
u16 base;
};
static const struct adc_tm5_data adc_tm5_data_pmic = {
.full_scale_code_volt = 0x70e4,
.decimation = (unsigned int []) { 250, 420, 840 },
.hw_settle = (unsigned int []) { 15, 100, 200, 300, 400, 500, 600, 700,
1000, 2000, 4000, 8000, 16000, 32000,
64000, 128000 },
};
static int adc_tm5_read(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len)
{
return regmap_bulk_read(adc_tm->regmap, adc_tm->base + offset, data, len);
}
static int adc_tm5_write(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len)
{
return regmap_bulk_write(adc_tm->regmap, adc_tm->base + offset, data, len);
}
static int adc_tm5_reg_update(struct adc_tm5_chip *adc_tm, u16 offset, u8 mask, u8 val)
{
return regmap_write_bits(adc_tm->regmap, adc_tm->base + offset, mask, val);
}
static irqreturn_t adc_tm5_isr(int irq, void *data)
{
struct adc_tm5_chip *chip = data;
u8 status_low, status_high, ctl;
int ret, i;
ret = adc_tm5_read(chip, ADC_TM5_STATUS_LOW, &status_low, sizeof(status_low));
if (unlikely(ret)) {
dev_err(chip->dev, "read status low failed: %d\n", ret);
return IRQ_HANDLED;
}
ret = adc_tm5_read(chip, ADC_TM5_STATUS_HIGH, &status_high, sizeof(status_high));
if (unlikely(ret)) {
dev_err(chip->dev, "read status high failed: %d\n", ret);
return IRQ_HANDLED;
}
for (i = 0; i < chip->nchannels; i++) {
bool upper_set = false, lower_set = false;
unsigned int ch = chip->channels[i].channel;
/* No TZD, we warned at the boot time */
if (!chip->channels[i].tzd)
continue;
ret = adc_tm5_read(chip, ADC_TM5_M_EN(ch), &ctl, sizeof(ctl));
if (unlikely(ret)) {
dev_err(chip->dev, "ctl read failed: %d, channel %d\n", ret, i);
continue;
}
if (!(ctl & ADC_TM5_M_MEAS_EN))
continue;
lower_set = (status_low & BIT(ch)) &&
(ctl & ADC_TM5_M_LOW_THR_INT_EN);
upper_set = (status_high & BIT(ch)) &&
(ctl & ADC_TM5_M_HIGH_THR_INT_EN);
if (upper_set || lower_set)
thermal_zone_device_update(chip->channels[i].tzd,
THERMAL_EVENT_UNSPECIFIED);
}
return IRQ_HANDLED;
}
static int adc_tm5_get_temp(void *data, int *temp)
{
struct adc_tm5_channel *channel = data;
int ret;
if (!channel || !channel->iio)
return -EINVAL;
ret = iio_read_channel_processed(channel->iio, temp);
if (ret < 0)
return ret;
if (ret != IIO_VAL_INT)
return -EINVAL;
return 0;
}
static int adc_tm5_disable_channel(struct adc_tm5_channel *channel)
{
struct adc_tm5_chip *chip = channel->chip;
unsigned int reg = ADC_TM5_M_EN(channel->channel);
return adc_tm5_reg_update(chip, reg,
ADC_TM5_M_MEAS_EN |
ADC_TM5_M_HIGH_THR_INT_EN |
ADC_TM5_M_LOW_THR_INT_EN,
0);
}
static int adc_tm5_enable(struct adc_tm5_chip *chip)
{
int ret;
u8 data;
data = ADC_TM_EN;
ret = adc_tm5_write(chip, ADC_TM_EN_CTL1, &data, sizeof(data));
if (ret < 0) {
dev_err(chip->dev, "adc-tm enable failed\n");
return ret;
}
data = ADC_TM_CONV_REQ_EN;
ret = adc_tm5_write(chip, ADC_TM_CONV_REQ, &data, sizeof(data));
if (ret < 0) {
dev_err(chip->dev, "adc-tm request conversion failed\n");
return ret;
}
return 0;
}
static int adc_tm5_configure(struct adc_tm5_channel *channel, int low, int high)
{
struct adc_tm5_chip *chip = channel->chip;
u8 buf[8];
u16 reg = ADC_TM5_M_ADC_CH_SEL_CTL(channel->channel);
int ret;
ret = adc_tm5_read(chip, reg, buf, sizeof(buf));
if (ret) {
dev_err(chip->dev, "channel %d params read failed: %d\n", channel->channel, ret);
return ret;
}
buf[0] = channel->adc_channel;
/* High temperature corresponds to low voltage threshold */
if (high != INT_MAX) {
u16 adc_code = qcom_adc_tm5_temp_volt_scale(channel->prescale,
chip->data->full_scale_code_volt, high);
buf[1] = adc_code & 0xff;
buf[2] = adc_code >> 8;
buf[7] |= ADC_TM5_M_LOW_THR_INT_EN;
} else {
buf[7] &= ~ADC_TM5_M_LOW_THR_INT_EN;
}
/* Low temperature corresponds to high voltage threshold */
if (low != -INT_MAX) {
u16 adc_code = qcom_adc_tm5_temp_volt_scale(channel->prescale,
chip->data->full_scale_code_volt, low);
buf[3] = adc_code & 0xff;
buf[4] = adc_code >> 8;
buf[7] |= ADC_TM5_M_HIGH_THR_INT_EN;
} else {
buf[7] &= ~ADC_TM5_M_HIGH_THR_INT_EN;
}
buf[5] = ADC5_TIMER_SEL_2;
/* Set calibration select, hw_settle delay */
buf[6] &= ~ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK;
buf[6] |= FIELD_PREP(ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK, channel->hw_settle_time);
buf[6] &= ~ADC_TM5_M_CTL_CAL_SEL_MASK;
buf[6] |= FIELD_PREP(ADC_TM5_M_CTL_CAL_SEL_MASK, channel->cal_method);
buf[7] |= ADC_TM5_M_MEAS_EN;
ret = adc_tm5_write(chip, reg, buf, sizeof(buf));
if (ret) {
dev_err(chip->dev, "channel %d params write failed: %d\n", channel->channel, ret);
return ret;
}
return adc_tm5_enable(chip);
}
static int adc_tm5_set_trips(void *data, int low, int high)
{
struct adc_tm5_channel *channel = data;
struct adc_tm5_chip *chip;
int ret;
if (!channel)
return -EINVAL;
chip = channel->chip;
dev_dbg(chip->dev, "%d:low(mdegC):%d, high(mdegC):%d\n",
channel->channel, low, high);
if (high == INT_MAX && low <= -INT_MAX)
ret = adc_tm5_disable_channel(channel);
else
ret = adc_tm5_configure(channel, low, high);
return ret;
}
static struct thermal_zone_of_device_ops adc_tm5_ops = {
.get_temp = adc_tm5_get_temp,
.set_trips = adc_tm5_set_trips,
};
static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
{
unsigned int i;
struct thermal_zone_device *tzd;
for (i = 0; i < adc_tm->nchannels; i++) {
adc_tm->channels[i].chip = adc_tm;
tzd = devm_thermal_zone_of_sensor_register(adc_tm->dev,
adc_tm->channels[i].channel,
&adc_tm->channels[i],
&adc_tm5_ops);
if (IS_ERR(tzd)) {
dev_err(adc_tm->dev, "Error registering TZ zone for channel %d: %ld\n",
adc_tm->channels[i].channel, PTR_ERR(tzd));
return PTR_ERR(tzd);
}
adc_tm->channels[i].tzd = tzd;
}
return 0;
}
static int adc_tm5_init(struct adc_tm5_chip *chip)
{
u8 buf[4], channels_available;
int ret;
unsigned int i;
ret = adc_tm5_read(chip, ADC_TM5_NUM_BTM,
&channels_available, sizeof(channels_available));
if (ret) {
dev_err(chip->dev, "read failed for BTM channels\n");
return ret;
}
for (i = 0; i < chip->nchannels; i++) {
if (chip->channels[i].channel >= channels_available) {
dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel);
return -EINVAL;
}
}
buf[0] = chip->decimation;
buf[1] = chip->avg_samples | ADC_TM5_FAST_AVG_EN;
buf[2] = ADC_TM5_TIMER1;
buf[3] = FIELD_PREP(ADC_TM5_MEAS_INTERVAL_CTL2_MASK, ADC_TM5_TIMER2) |
FIELD_PREP(ADC_TM5_MEAS_INTERVAL_CTL3_MASK, ADC_TM5_TIMER3);
ret = adc_tm5_write(chip, ADC_TM5_ADC_DIG_PARAM, buf, sizeof(buf));
if (ret) {
dev_err(chip->dev, "block write failed: %d\n", ret);
return ret;
}
return ret;
}
static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm,
struct adc_tm5_channel *channel,
struct device_node *node)
{
const char *name = node->name;
u32 chan, value, varr[2];
int ret;
struct device *dev = adc_tm->dev;
struct of_phandle_args args;
ret = of_property_read_u32(node, "reg", &chan);
if (ret) {
dev_err(dev, "%s: invalid channel number %d\n", name, ret);
return ret;
}
if (chan >= ADC_TM5_NUM_CHANNELS) {
dev_err(dev, "%s: channel number too big: %d\n", name, chan);
return -EINVAL;
}
channel->channel = chan;
/*
* We are tied to PMIC's ADC controller, which always use single
* argument for channel number. So don't bother parsing
* #io-channel-cells, just enforce cell_count = 1.
*/
ret = of_parse_phandle_with_fixed_args(node, "io-channels", 1, 0, &args);
if (ret < 0) {
dev_err(dev, "%s: error parsing ADC channel number %d: %d\n", name, chan, ret);
return ret;
}
of_node_put(args.np);
if (args.args_count != 1 || args.args[0] >= ADC5_MAX_CHANNEL) {
dev_err(dev, "%s: invalid ADC channel number %d\n", name, chan);
return ret;
}
channel->adc_channel = args.args[0];
channel->iio = devm_of_iio_channel_get_by_name(adc_tm->dev, node, NULL);
if (IS_ERR(channel->iio)) {
ret = PTR_ERR(channel->iio);
if (ret != -EPROBE_DEFER)
dev_err(dev, "%s: error getting channel: %d\n", name, ret);
return ret;
}
ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2);
if (!ret) {
ret = qcom_adc5_prescaling_from_dt(varr[0], varr[1]);
if (ret < 0) {
dev_err(dev, "%s: invalid pre-scaling <%d %d>\n",
name, varr[0], varr[1]);
return ret;
}
channel->prescale = ret;
} else {
/* 1:1 prescale is index 0 */
channel->prescale = 0;
}
ret = of_property_read_u32(node, "qcom,hw-settle-time-us", &value);
if (!ret) {
ret = qcom_adc5_hw_settle_time_from_dt(value, adc_tm->data->hw_settle);
if (ret < 0) {
dev_err(dev, "%s invalid hw-settle-time-us %d us\n",
name, value);
return ret;
}
channel->hw_settle_time = ret;
} else {
channel->hw_settle_time = VADC_DEF_HW_SETTLE_TIME;
}
if (of_property_read_bool(node, "qcom,ratiometric"))
channel->cal_method = ADC_TM5_RATIOMETRIC_CAL;
else
channel->cal_method = ADC_TM5_ABSOLUTE_CAL;
return 0;
}
static int adc_tm5_get_dt_data(struct adc_tm5_chip *adc_tm, struct device_node *node)
{
struct adc_tm5_channel *channels;
struct device_node *child;
u32 value;
int ret;
struct device *dev = adc_tm->dev;
adc_tm->nchannels = of_get_available_child_count(node);
if (!adc_tm->nchannels)
return -EINVAL;
adc_tm->channels = devm_kcalloc(dev, adc_tm->nchannels,
sizeof(*adc_tm->channels), GFP_KERNEL);
if (!adc_tm->channels)
return -ENOMEM;
channels = adc_tm->channels;
adc_tm->data = of_device_get_match_data(dev);
if (!adc_tm->data)
adc_tm->data = &adc_tm5_data_pmic;
ret = of_property_read_u32(node, "qcom,decimation", &value);
if (!ret) {
ret = qcom_adc5_decimation_from_dt(value, adc_tm->data->decimation);
if (ret < 0) {
dev_err(dev, "invalid decimation %d\n", value);
return ret;
}
adc_tm->decimation = ret;
} else {
adc_tm->decimation = ADC5_DECIMATION_DEFAULT;
}
ret = of_property_read_u32(node, "qcom,avg-samples", &value);
if (!ret) {
ret = qcom_adc5_avg_samples_from_dt(value);
if (ret < 0) {
dev_err(dev, "invalid avg-samples %d\n", value);
return ret;
}
adc_tm->avg_samples = ret;
} else {
adc_tm->avg_samples = VADC_DEF_AVG_SAMPLES;
}
for_each_available_child_of_node(node, child) {
ret = adc_tm5_get_dt_channel_data(adc_tm, channels, child);
if (ret) {
of_node_put(child);
return ret;
}
channels++;
}
return 0;
}
static int adc_tm5_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct device *dev = &pdev->dev;
struct adc_tm5_chip *adc_tm;
struct regmap *regmap;
int ret, irq;
u32 reg;
regmap = dev_get_regmap(dev->parent, NULL);
if (!regmap)
return -ENODEV;
ret = of_property_read_u32(node, "reg", &reg);
if (ret)
return ret;
adc_tm = devm_kzalloc(&pdev->dev, sizeof(*adc_tm), GFP_KERNEL);
if (!adc_tm)
return -ENOMEM;
adc_tm->regmap = regmap;
adc_tm->dev = dev;
adc_tm->base = reg;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "get_irq failed: %d\n", irq);
return irq;
}
ret = adc_tm5_get_dt_data(adc_tm, node);
if (ret) {
dev_err(dev, "get dt data failed: %d\n", ret);
return ret;
}
ret = adc_tm5_init(adc_tm);
if (ret) {
dev_err(dev, "adc-tm init failed\n");
return ret;
}
ret = adc_tm5_register_tzd(adc_tm);
if (ret) {
dev_err(dev, "tzd register failed\n");
return ret;
}
return devm_request_threaded_irq(dev, irq, NULL, adc_tm5_isr,
IRQF_ONESHOT, "pm-adc-tm5", adc_tm);
}
static const struct of_device_id adc_tm5_match_table[] = {
{
.compatible = "qcom,spmi-adc-tm5",
.data = &adc_tm5_data_pmic,
},
{ }
};
MODULE_DEVICE_TABLE(of, adc_tm5_match_table);
static struct platform_driver adc_tm5_driver = {
.driver = {
.name = "qcom-spmi-adc-tm5",
.of_match_table = adc_tm5_match_table,
},
.probe = adc_tm5_probe,
};
module_platform_driver(adc_tm5_driver);
MODULE_DESCRIPTION("SPMI PMIC Thermal Monitor ADC driver");
MODULE_LICENSE("GPL v2");

126
drivers/thermal/tango_thermal.c
View File

@ -1,126 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/thermal.h>
#include <linux/platform_device.h>
/*
* According to a data sheet draft, "this temperature sensor uses a bandgap
* type of circuit to compare a voltage which has a negative temperature
* coefficient with a voltage that is proportional to absolute temperature.
* A resistor bank allows 41 different temperature thresholds to be selected
* and the logic output will then indicate whether the actual die temperature
* lies above or below the selected threshold."
*/
#define TEMPSI_CMD 0
#define TEMPSI_RES 4
#define TEMPSI_CFG 8
#define CMD_OFF 0
#define CMD_ON 1
#define CMD_READ 2
#define IDX_MIN 15
#define IDX_MAX 40
struct tango_thermal_priv {
void __iomem *base;
int thresh_idx;
};
static bool temp_above_thresh(void __iomem *base, int thresh_idx)
{
writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD);
usleep_range(10, 20);
writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD);
return readl(base + TEMPSI_RES);
}
static int tango_get_temp(void *arg, int *res)
{
struct tango_thermal_priv *priv = arg;
int idx = priv->thresh_idx;
if (temp_above_thresh(priv->base, idx)) {
/* Search upward by incrementing thresh_idx */
while (idx < IDX_MAX && temp_above_thresh(priv->base, ++idx))
cpu_relax();
idx = idx - 1; /* always return lower bound */
} else {
/* Search downward by decrementing thresh_idx */
while (idx > IDX_MIN && !temp_above_thresh(priv->base, --idx))
cpu_relax();
}
*res = (idx * 9 / 2 - 38) * 1000; /* millidegrees Celsius */
priv->thresh_idx = idx;
return 0;
}
static const struct thermal_zone_of_device_ops ops = {
.get_temp = tango_get_temp,
};
static void tango_thermal_init(struct tango_thermal_priv *priv)
{
writel(0, priv->base + TEMPSI_CFG);
writel(CMD_ON, priv->base + TEMPSI_CMD);
}
static int tango_thermal_probe(struct platform_device *pdev)
{
struct resource *res;
struct tango_thermal_priv *priv;
struct thermal_zone_device *tzdev;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
platform_set_drvdata(pdev, priv);
priv->thresh_idx = IDX_MIN;
tango_thermal_init(priv);
tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &ops);
return PTR_ERR_OR_ZERO(tzdev);
}
static int __maybe_unused tango_thermal_resume(struct device *dev)
{
tango_thermal_init(dev_get_drvdata(dev));
return 0;
}
static SIMPLE_DEV_PM_OPS(tango_thermal_pm, NULL, tango_thermal_resume);
static const struct of_device_id tango_sensor_ids[] = {
{
.compatible = "sigma,smp8758-thermal",
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, tango_sensor_ids);
static struct platform_driver tango_thermal_driver = {
.probe = tango_thermal_probe,
.driver = {
.name = "tango-thermal",
.of_match_table = tango_sensor_ids,
.pm = &tango_thermal_pm,
},
};
module_platform_driver(tango_thermal_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Sigma Designs");
MODULE_DESCRIPTION("Tango temperature sensor");

72
drivers/thermal/thermal_core.c
View File

@ -289,16 +289,11 @@ static int __init thermal_register_governors(void)
* - Critical trip point will cause a system shutdown.
*/
static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
int delay)
unsigned long delay)
{
if (delay > 1000)
if (delay)
mod_delayed_work(system_freezable_power_efficient_wq,
&tz->poll_queue,
round_jiffies(msecs_to_jiffies(delay)));
else if (delay)
mod_delayed_work(system_freezable_power_efficient_wq,
&tz->poll_queue,
msecs_to_jiffies(delay));
&tz->poll_queue, delay);
else
cancel_delayed_work(&tz->poll_queue);
}
@ -317,9 +312,9 @@ static void monitor_thermal_zone(struct thermal_zone_device *tz)
mutex_lock(&tz->lock);
if (!stop && tz->passive)
thermal_zone_device_set_polling(tz, tz->passive_delay);
else if (!stop && tz->polling_delay)
thermal_zone_device_set_polling(tz, tz->polling_delay);
thermal_zone_device_set_polling(tz, tz->passive_delay_jiffies);
else if (!stop && tz->polling_delay_jiffies)
thermal_zone_device_set_polling(tz, tz->polling_delay_jiffies);
else
thermal_zone_device_set_polling(tz, 0);
@ -412,9 +407,6 @@ static void handle_critical_trips(struct thermal_zone_device *tz,
trace_thermal_zone_trip(tz, trip, trip_type);
if (tz->ops->notify)
tz->ops->notify(tz, trip, trip_type);
if (trip_type == THERMAL_TRIP_HOT && tz->ops->hot)
tz->ops->hot(tz);
else if (trip_type == THERMAL_TRIP_CRITICAL)
@ -486,12 +478,6 @@ static void thermal_zone_device_init(struct thermal_zone_device *tz)
pos->initialized = false;
}
static void thermal_zone_device_reset(struct thermal_zone_device *tz)
{
tz->passive = 0;
thermal_zone_device_init(tz);
}
static int thermal_zone_device_set_mode(struct thermal_zone_device *tz,
enum thermal_device_mode mode)
{
@ -601,26 +587,6 @@ static void thermal_zone_device_check(struct work_struct *work)
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
}
void thermal_zone_device_rebind_exception(struct thermal_zone_device *tz,
const char *cdev_type, size_t size)
{
struct thermal_cooling_device *cdev = NULL;
mutex_lock(&thermal_list_lock);
list_for_each_entry(cdev, &thermal_cdev_list, node) {
/* skip non matching cdevs */
if (strncmp(cdev_type, cdev->type, size))
continue;
/* re binding the exception matching the type pattern */
thermal_zone_bind_cooling_device(tz, THERMAL_TRIPS_NONE, cdev,
THERMAL_NO_LIMIT,
THERMAL_NO_LIMIT,
THERMAL_WEIGHT_DEFAULT);
}
mutex_unlock(&thermal_list_lock);
}
int for_each_thermal_governor(int (*cb)(struct thermal_governor *, void *),
void *data)
{
@ -688,23 +654,6 @@ struct thermal_zone_device *thermal_zone_get_by_id(int id)
return match;
}
void thermal_zone_device_unbind_exception(struct thermal_zone_device *tz,
const char *cdev_type, size_t size)
{
struct thermal_cooling_device *cdev = NULL;
mutex_lock(&thermal_list_lock);
list_for_each_entry(cdev, &thermal_cdev_list, node) {
/* skip non matching cdevs */
if (strncmp(cdev_type, cdev->type, size))
continue;
/* unbinding the exception matching the type pattern */
thermal_zone_unbind_cooling_device(tz, THERMAL_TRIPS_NONE,
cdev);
}
mutex_unlock(&thermal_list_lock);
}
/*
* Device management section: cooling devices, zones devices, and binding
*
@ -750,7 +699,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
unsigned long max_state;
int result, ret;
if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE))
if (trip >= tz->trips || trip < 0)
return -EINVAL;
list_for_each_entry(pos1, &thermal_tz_list, node) {
@ -1352,8 +1301,9 @@ thermal_zone_device_register(const char *type, int trips, int mask,
tz->device.class = &thermal_class;
tz->devdata = devdata;
tz->trips = trips;
tz->passive_delay = passive_delay;
tz->polling_delay = polling_delay;
thermal_set_delay_jiffies(&tz->passive_delay_jiffies, passive_delay);
thermal_set_delay_jiffies(&tz->polling_delay_jiffies, polling_delay);
/* sys I/F */
/* Add nodes that are always present via .groups */
@ -1407,7 +1357,7 @@ thermal_zone_device_register(const char *type, int trips, int mask,
INIT_DELAYED_WORK(&tz->poll_queue, thermal_zone_device_check);
thermal_zone_device_reset(tz);
thermal_zone_device_init(tz);
/* Update the new thermal zone and mark it as already updated. */
if (atomic_cmpxchg(&tz->need_update, 1, 0))
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);

7
drivers/thermal/thermal_core.h
View File

@ -65,6 +65,8 @@ static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
cdev->ops->power2state;
}
void thermal_cdev_update(struct thermal_cooling_device *);
/**
* struct thermal_trip - representation of a point in temperature domain
* @np: pointer to struct device_node that this trip point was created from
@ -118,15 +120,12 @@ struct thermal_instance {
int thermal_register_governor(struct thermal_governor *);
void thermal_unregister_governor(struct thermal_governor *);
void thermal_zone_device_rebind_exception(struct thermal_zone_device *,
const char *, size_t);
void thermal_zone_device_unbind_exception(struct thermal_zone_device *,
const char *, size_t);
int thermal_zone_device_set_policy(struct thermal_zone_device *, char *);
int thermal_build_list_of_policies(char *buf);
/* Helpers */
void thermal_zone_set_trips(struct thermal_zone_device *tz);
void thermal_set_delay_jiffies(unsigned long *delay_jiffies, int delay_ms);
/* sysfs I/F */
int thermal_zone_create_device_groups(struct thermal_zone_device *, int);

7
drivers/thermal/thermal_helpers.c
View File

@ -175,6 +175,13 @@ exit:
mutex_unlock(&tz->lock);
}
void thermal_set_delay_jiffies(unsigned long *delay_jiffies, int delay_ms)
{
*delay_jiffies = msecs_to_jiffies(delay_ms);
if (delay_ms > 1000)
*delay_jiffies = round_jiffies(*delay_jiffies);
}
static void thermal_cdev_set_cur_state(struct thermal_cooling_device *cdev,
int target)
{

85
drivers/thermal/thermal_sysfs.c
View File

@ -216,49 +216,6 @@ trip_point_hyst_show(struct device *dev, struct device_attribute *attr,
return ret ? ret : sprintf(buf, "%d\n", temperature);
}
static ssize_t
passive_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int state;
if (sscanf(buf, "%d\n", &state) != 1)
return -EINVAL;
/* sanity check: values below 1000 millicelcius don't make sense
* and can cause the system to go into a thermal heart attack
*/
if (state && state < 1000)
return -EINVAL;
if (state && !tz->forced_passive) {
if (!tz->passive_delay)
tz->passive_delay = 1000;
thermal_zone_device_rebind_exception(tz, "Processor",
sizeof("Processor"));
} else if (!state && tz->forced_passive) {
tz->passive_delay = 0;
thermal_zone_device_unbind_exception(tz, "Processor",
sizeof("Processor"));
}
tz->forced_passive = state;
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return count;
}
static ssize_t
passive_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
return sprintf(buf, "%d\n", tz->forced_passive);
}
static ssize_t
policy_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
@ -403,7 +360,6 @@ static DEVICE_ATTR_RW(sustainable_power);
/* These thermal zone device attributes are created based on conditions */
static DEVICE_ATTR_RW(mode);
static DEVICE_ATTR_RW(passive);
/* These attributes are unconditionally added to a thermal zone */
static struct attribute *thermal_zone_dev_attrs[] = {
@ -438,45 +394,9 @@ static const struct attribute_group thermal_zone_mode_attribute_group = {
.attrs = thermal_zone_mode_attrs,
};
/* We expose passive only if passive trips are present */
static struct attribute *thermal_zone_passive_attrs[] = {
&dev_attr_passive.attr,
NULL,
};
static umode_t thermal_zone_passive_is_visible(struct kobject *kobj,
struct attribute *attr,
int attrno)
{
struct device *dev = kobj_to_dev(kobj);
struct thermal_zone_device *tz;
enum thermal_trip_type trip_type;
int count, passive = 0;
tz = container_of(dev, struct thermal_zone_device, device);
for (count = 0; count < tz->trips && !passive; count++) {
tz->ops->get_trip_type(tz, count, &trip_type);
if (trip_type == THERMAL_TRIP_PASSIVE)
passive = 1;
}
if (!passive)
return attr->mode;
return 0;
}
static const struct attribute_group thermal_zone_passive_attribute_group = {
.attrs = thermal_zone_passive_attrs,
.is_visible = thermal_zone_passive_is_visible,
};
static const struct attribute_group *thermal_zone_attribute_groups[] = {
&thermal_zone_attribute_group,
&thermal_zone_mode_attribute_group,
&thermal_zone_passive_attribute_group,
/* This is not NULL terminated as we create the group dynamically */
};
@ -955,10 +875,7 @@ trip_point_show(struct device *dev, struct device_attribute *attr, char *buf)
instance =
container_of(attr, struct thermal_instance, attr);
if (instance->trip == THERMAL_TRIPS_NONE)
return sprintf(buf, "-1\n");
else
return sprintf(buf, "%d\n", instance->trip);
return sprintf(buf, "%d\n", instance->trip);
}
ssize_t

7
drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
View File

@ -24,7 +24,7 @@ omap4430_mpu_temp_sensor_registers = {
.bgap_dtemp_mask = OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK,
.bgap_mode_ctrl = OMAP4430_TEMP_SENSOR_CTRL_OFFSET,
.mode_ctrl_mask = OMAP4430_SINGLE_MODE_MASK,
.mode_ctrl_mask = OMAP4430_CONTINUOUS_MODE_MASK,
.bgap_efuse = OMAP4430_FUSE_OPP_BGAP,
};
@ -58,7 +58,8 @@ omap4430_adc_to_temp[OMAP4430_ADC_END_VALUE - OMAP4430_ADC_START_VALUE + 1] = {
const struct ti_bandgap_data omap4430_data = {
.features = TI_BANDGAP_FEATURE_MODE_CONFIG |
TI_BANDGAP_FEATURE_CLK_CTRL |
TI_BANDGAP_FEATURE_POWER_SWITCH,
TI_BANDGAP_FEATURE_POWER_SWITCH |
TI_BANDGAP_FEATURE_CONT_MODE_ONLY,
.fclock_name = "bandgap_fclk",
.div_ck_name = "bandgap_fclk",
.conv_table = omap4430_adc_to_temp,
@ -96,7 +97,7 @@ omap4460_mpu_temp_sensor_registers = {
.mask_cold_mask = OMAP4460_MASK_COLD_MASK,
.bgap_mode_ctrl = OMAP4460_BGAP_CTRL_OFFSET,
.mode_ctrl_mask = OMAP4460_SINGLE_MODE_MASK,
.mode_ctrl_mask = OMAP4460_CONTINUOUS_MODE_MASK,
.bgap_counter = OMAP4460_BGAP_COUNTER_OFFSET,
.counter_mask = OMAP4460_COUNTER_MASK,

4
drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
View File

@ -40,7 +40,7 @@
/* OMAP4430.TEMP_SENSOR bits */
#define OMAP4430_BGAP_TEMPSOFF_MASK BIT(12)
#define OMAP4430_BGAP_TSHUT_MASK BIT(11)
#define OMAP4430_SINGLE_MODE_MASK BIT(10)
#define OMAP4430_CONTINUOUS_MODE_MASK BIT(10)
#define OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK BIT(9)
#define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(8)
#define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0)
@ -113,7 +113,7 @@
#define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0)
/* OMAP4460.BANDGAP_CTRL bits */
#define OMAP4460_SINGLE_MODE_MASK BIT(31)
#define OMAP4460_CONTINUOUS_MODE_MASK BIT(31)
#define OMAP4460_MASK_HOT_MASK BIT(1)
#define OMAP4460_MASK_COLD_MASK BIT(0)

54
drivers/thermal/ti-soc-thermal/ti-bandgap.c
View File

@ -26,6 +26,7 @@
#include <linux/of_platform.h>
#include <linux/of_irq.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/cpu_pm.h>
#include <linux/device.h>
#include <linux/pm_runtime.h>
@ -602,36 +603,41 @@ void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
static int
ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
{
u32 counter = 1000;
struct temp_sensor_registers *tsr;
struct temp_sensor_registers *tsr = bgp->conf->sensors[id].registers;
void __iomem *temp_sensor_ctrl = bgp->base + tsr->temp_sensor_ctrl;
int error;
u32 val;
/* Select single conversion mode */
if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0);
/* Start of Conversion = 1 */
RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1);
/* Wait for EOCZ going up */
tsr = bgp->conf->sensors[id].registers;
while (--counter) {
if (ti_bandgap_readl(bgp, tsr->temp_sensor_ctrl) &
tsr->bgap_eocz_mask)
break;
/* Select continuous or single conversion mode */
if (TI_BANDGAP_HAS(bgp, MODE_CONFIG)) {
if (TI_BANDGAP_HAS(bgp, CONT_MODE_ONLY))
RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 1);
else
RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0);
}
/* Start of Conversion = 0 */
RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 0);
/* Set Start of Conversion if available */
if (tsr->bgap_soc_mask) {
RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1);
/* Wait for EOCZ going down */
counter = 1000;
while (--counter) {
if (!(ti_bandgap_readl(bgp, tsr->temp_sensor_ctrl) &
tsr->bgap_eocz_mask))
break;
/* Wait for EOCZ going up */
error = readl_poll_timeout_atomic(temp_sensor_ctrl, val,
val & tsr->bgap_eocz_mask,
1, 1000);
if (error)
dev_warn(bgp->dev, "eocz timed out waiting high\n");
/* Clear Start of Conversion if available */
RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 0);
}
/* Wait for EOCZ going down, always needed even if no bgap_soc_mask */
error = readl_poll_timeout_atomic(temp_sensor_ctrl, val,
!(val & tsr->bgap_eocz_mask),
1, 1500);
if (error)
dev_warn(bgp->dev, "eocz timed out waiting low\n");
return 0;
}

2
drivers/thermal/ti-soc-thermal/ti-bandgap.h
View File

@ -280,6 +280,7 @@ struct ti_temp_sensor {
* has Errata 814
* TI_BANDGAP_FEATURE_UNRELIABLE - used when the sensor readings are too
* inaccurate.
* TI_BANDGAP_FEATURE_CONT_MODE_ONLY - used when single mode hangs the sensor
* TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a
* specific feature (above) or not. Return non-zero, if yes.
*/
@ -295,6 +296,7 @@ struct ti_temp_sensor {
#define TI_BANDGAP_FEATURE_HISTORY_BUFFER BIT(9)
#define TI_BANDGAP_FEATURE_ERRATA_814 BIT(10)
#define TI_BANDGAP_FEATURE_UNRELIABLE BIT(11)
#define TI_BANDGAP_FEATURE_CONT_MODE_ONLY BIT(12)
#define TI_BANDGAP_HAS(b, f) \
((b)->conf->features & TI_BANDGAP_FEATURE_ ## f)

6
drivers/thermal/ti-soc-thermal/ti-thermal-common.c
View File

@ -166,6 +166,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
char *domain)
{
struct ti_thermal_data *data;
int interval;
data = ti_bandgap_get_sensor_data(bgp, id);
@ -183,9 +184,10 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
return PTR_ERR(data->ti_thermal);
}
interval = jiffies_to_msecs(data->ti_thermal->polling_delay_jiffies);
ti_bandgap_set_sensor_data(bgp, id, data);
ti_bandgap_write_update_interval(bgp, data->sensor_id,
data->ti_thermal->polling_delay);
ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);
return 0;
}

256
drivers/thermal/zx2967_thermal.c
View File

@ -1,256 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* ZTE's zx2967 family thermal sensor driver
*
* Copyright (C) 2017 ZTE Ltd.
*
* Author: Baoyou Xie <baoyou.xie@linaro.org>
*/
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/thermal.h>
/* Power Mode: 0->low 1->high */
#define ZX2967_THERMAL_POWER_MODE 0
#define ZX2967_POWER_MODE_LOW 0
#define ZX2967_POWER_MODE_HIGH 1
/* DCF Control Register */
#define ZX2967_THERMAL_DCF 0x4
#define ZX2967_DCF_EN BIT(1)
#define ZX2967_DCF_FREEZE BIT(0)
/* Selection Register */
#define ZX2967_THERMAL_SEL 0x8
/* Control Register */
#define ZX2967_THERMAL_CTRL 0x10
#define ZX2967_THERMAL_READY BIT(12)
#define ZX2967_THERMAL_TEMP_MASK GENMASK(11, 0)
#define ZX2967_THERMAL_ID_MASK 0x18
#define ZX2967_THERMAL_ID 0x10
#define ZX2967_GET_TEMP_TIMEOUT_US (100 * 1024)
/**
* struct zx2967_thermal_priv - zx2967 thermal sensor private structure
* @tzd: struct thermal_zone_device where the sensor is registered
* @lock: prevents read sensor in parallel
* @clk_topcrm: topcrm clk structure
* @clk_apb: apb clk structure
* @regs: pointer to base address of the thermal sensor
* @dev: struct device pointer
*/
struct zx2967_thermal_priv {
struct thermal_zone_device *tzd;
struct mutex lock;
struct clk *clk_topcrm;
struct clk *clk_apb;
void __iomem *regs;
struct device *dev;
};
static int zx2967_thermal_get_temp(void *data, int *temp)
{
void __iomem *regs;
struct zx2967_thermal_priv *priv = data;
u32 val;
int ret;
if (!priv->tzd)
return -EAGAIN;
regs = priv->regs;
mutex_lock(&priv->lock);
writel_relaxed(ZX2967_POWER_MODE_LOW,
regs + ZX2967_THERMAL_POWER_MODE);
writel_relaxed(ZX2967_DCF_EN, regs + ZX2967_THERMAL_DCF);
val = readl_relaxed(regs + ZX2967_THERMAL_SEL);
val &= ~ZX2967_THERMAL_ID_MASK;
val |= ZX2967_THERMAL_ID;
writel_relaxed(val, regs + ZX2967_THERMAL_SEL);
/*
* Must wait for a while, surely it's a bit odd.
* otherwise temperature value we got has a few deviation, even if
* the THERMAL_READY bit is set.
*/
usleep_range(100, 300);
ret = readx_poll_timeout(readl, regs + ZX2967_THERMAL_CTRL,
val, val & ZX2967_THERMAL_READY, 300,
ZX2967_GET_TEMP_TIMEOUT_US);
if (ret) {
dev_err(priv->dev, "Thermal sensor data timeout\n");
goto unlock;
}
writel_relaxed(ZX2967_DCF_FREEZE | ZX2967_DCF_EN,
regs + ZX2967_THERMAL_DCF);
val = readl_relaxed(regs + ZX2967_THERMAL_CTRL)
& ZX2967_THERMAL_TEMP_MASK;
writel_relaxed(ZX2967_POWER_MODE_HIGH,
regs + ZX2967_THERMAL_POWER_MODE);
/*
* Calculate temperature
* In dts, slope is multiplied by 1000.
*/
*temp = DIV_ROUND_CLOSEST(((s32)val + priv->tzd->tzp->offset) * 1000,
priv->tzd->tzp->slope);
unlock:
mutex_unlock(&priv->lock);
return ret;
}
static const struct thermal_zone_of_device_ops zx2967_of_thermal_ops = {
.get_temp = zx2967_thermal_get_temp,
};
static int zx2967_thermal_probe(struct platform_device *pdev)
{
struct zx2967_thermal_priv *priv;
struct resource *res;
int ret;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(priv->regs))
return PTR_ERR(priv->regs);
priv->clk_topcrm = devm_clk_get(&pdev->dev, "topcrm");
if (IS_ERR(priv->clk_topcrm)) {
ret = PTR_ERR(priv->clk_topcrm);
dev_err(&pdev->dev, "failed to get topcrm clock: %d\n", ret);
return ret;
}
ret = clk_prepare_enable(priv->clk_topcrm);
if (ret) {
dev_err(&pdev->dev, "failed to enable topcrm clock: %d\n",
ret);
return ret;
}
priv->clk_apb = devm_clk_get(&pdev->dev, "apb");
if (IS_ERR(priv->clk_apb)) {
ret = PTR_ERR(priv->clk_apb);
dev_err(&pdev->dev, "failed to get apb clock: %d\n", ret);
goto disable_clk_topcrm;
}
ret = clk_prepare_enable(priv->clk_apb);
if (ret) {
dev_err(&pdev->dev, "failed to enable apb clock: %d\n",
ret);
goto disable_clk_topcrm;
}
mutex_init(&priv->lock);
priv->tzd = thermal_zone_of_sensor_register(&pdev->dev,
0, priv, &zx2967_of_thermal_ops);
if (IS_ERR(priv->tzd)) {
ret = PTR_ERR(priv->tzd);
dev_err(&pdev->dev, "failed to register sensor: %d\n", ret);
goto disable_clk_all;
}
if (priv->tzd->tzp->slope == 0) {
thermal_zone_of_sensor_unregister(&pdev->dev, priv->tzd);
dev_err(&pdev->dev, "coefficients of sensor is invalid\n");
ret = -EINVAL;
goto disable_clk_all;
}
priv->dev = &pdev->dev;
platform_set_drvdata(pdev, priv);
return 0;
disable_clk_all:
clk_disable_unprepare(priv->clk_apb);
disable_clk_topcrm:
clk_disable_unprepare(priv->clk_topcrm);
return ret;
}
static int zx2967_thermal_exit(struct platform_device *pdev)
{
struct zx2967_thermal_priv *priv = platform_get_drvdata(pdev);
thermal_zone_of_sensor_unregister(&pdev->dev, priv->tzd);
clk_disable_unprepare(priv->clk_topcrm);
clk_disable_unprepare(priv->clk_apb);
return 0;
}
static const struct of_device_id zx2967_thermal_id_table[] = {
{ .compatible = "zte,zx296718-thermal" },
{}
};
MODULE_DEVICE_TABLE(of, zx2967_thermal_id_table);
#ifdef CONFIG_PM_SLEEP
static int zx2967_thermal_suspend(struct device *dev)
{
struct zx2967_thermal_priv *priv = dev_get_drvdata(dev);
if (priv && priv->clk_topcrm)
clk_disable_unprepare(priv->clk_topcrm);
if (priv && priv->clk_apb)
clk_disable_unprepare(priv->clk_apb);
return 0;
}
static int zx2967_thermal_resume(struct device *dev)
{
struct zx2967_thermal_priv *priv = dev_get_drvdata(dev);
int error;
error = clk_prepare_enable(priv->clk_topcrm);
if (error)
return error;
error = clk_prepare_enable(priv->clk_apb);
if (error) {
clk_disable_unprepare(priv->clk_topcrm);
return error;
}
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(zx2967_thermal_pm_ops,
zx2967_thermal_suspend, zx2967_thermal_resume);
static struct platform_driver zx2967_thermal_driver = {
.probe = zx2967_thermal_probe,
.remove = zx2967_thermal_exit,
.driver = {
.name = "zx2967_thermal",
.of_match_table = zx2967_thermal_id_table,
.pm = &zx2967_thermal_pm_ops,
},
};
module_platform_driver(zx2967_thermal_driver);
MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>");
MODULE_DESCRIPTION("ZTE zx2967 thermal driver");
MODULE_LICENSE("GPL v2");

3
include/linux/iio/adc/qcom-vadc-common.h
View File

@ -158,6 +158,9 @@ int qcom_adc5_hw_scale(enum vadc_scale_fn_type scaletype,
const struct adc5_data *data,
u16 adc_code, int *result_mdec);
u16 qcom_adc_tm5_temp_volt_scale(unsigned int prescale_ratio,
u32 full_scale_code_volt, int temp);
int qcom_adc5_prescaling_from_dt(u32 num, u32 den);
int qcom_adc5_hw_settle_time_from_dt(u32 value, const unsigned int *hw_settle);

18
include/linux/thermal.h
View File

@ -17,7 +17,6 @@
#include <linux/workqueue.h>
#include <uapi/linux/thermal.h>
#define THERMAL_TRIPS_NONE -1
#define THERMAL_MAX_TRIPS 12
/* invalid cooling state */
@ -77,8 +76,6 @@ struct thermal_zone_device_ops {
int (*set_emul_temp) (struct thermal_zone_device *, int);
int (*get_trend) (struct thermal_zone_device *, int,
enum thermal_trend *);
int (*notify) (struct thermal_zone_device *, int,
enum thermal_trip_type);
void (*hot)(struct thermal_zone_device *);
void (*critical)(struct thermal_zone_device *);
};
@ -118,9 +115,9 @@ struct thermal_cooling_device {
* @devdata: private pointer for device private data
* @trips: number of trip points the thermal zone supports
* @trips_disabled; bitmap for disabled trips
* @passive_delay: number of milliseconds to wait between polls when
* @passive_delay_jiffies: number of jiffies to wait between polls when
* performing passive cooling.
* @polling_delay: number of milliseconds to wait between polls when
* @polling_delay_jiffies: number of jiffies to wait between polls when
* checking whether trip points have been crossed (0 for
* interrupt driven systems)
* @temperature: current temperature. This is only for core code,
@ -133,9 +130,6 @@ struct thermal_cooling_device {
trip point.
* @prev_high_trip: the above current temperature if you've crossed a
passive trip point.
* @forced_passive: If > 0, temperature at which to switch on all ACPI
* processor cooling devices. Currently only used by the
* step-wise governor.
* @need_update: if equals 1, thermal_zone_device_update needs to be invoked.
* @ops: operations this &thermal_zone_device supports
* @tzp: thermal zone parameters
@ -161,15 +155,14 @@ struct thermal_zone_device {
void *devdata;
int trips;
unsigned long trips_disabled; /* bitmap for disabled trips */
int passive_delay;
int polling_delay;
unsigned long passive_delay_jiffies;
unsigned long polling_delay_jiffies;
int temperature;
int last_temperature;
int emul_temperature;
int passive;
int prev_low_trip;
int prev_high_trip;
unsigned int forced_passive;
atomic_t need_update;
struct thermal_zone_device_ops *ops;
struct thermal_zone_params *tzp;
@ -397,7 +390,6 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp);
int thermal_zone_get_slope(struct thermal_zone_device *tz);
int thermal_zone_get_offset(struct thermal_zone_device *tz);
void thermal_cdev_update(struct thermal_cooling_device *);
void thermal_notify_framework(struct thermal_zone_device *, int);
int thermal_zone_device_enable(struct thermal_zone_device *tz);
int thermal_zone_device_disable(struct thermal_zone_device *tz);
@ -444,8 +436,6 @@ static inline int thermal_zone_get_offset(
struct thermal_zone_device *tz)
{ return -ENODEV; }
static inline void thermal_cdev_update(struct thermal_cooling_device *cdev)
{ }
static inline void thermal_notify_framework(struct thermal_zone_device *tz,
int trip)
{ }