mips: unify prom_putchar() declarations

prom_putchar() is used centrally in early printk infrastructure therefore
at least MIPS should agree on the function return type.

[paul.burton@mips.com:
  - Include linux/types.h in asm/setup.h to gain the bool typedef before
    we start include asm/setup.h elsewhere.
  - Include asm/setup.h in all files that use or define prom_putchar().
  - Also standardise on signed rather than unsigned char argument.]

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19842/
Cc: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>

arch/mips/alchemy/board-gpr.c

@@ -34,6 +34,7 @@
 #include <asm/bootinfo.h>
 #include <asm/idle.h>
 #include <asm/reboot.h>
+#include <asm/setup.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/gpio-au1000.h>
 #include <prom.h>
@@ -60,7 +61,7 @@ void __init prom_init(void)
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
 
-void prom_putchar(unsigned char c)
+void prom_putchar(char c)
 {
 	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }

arch/mips/alchemy/board-mtx1.c

@@ -31,6 +31,7 @@
 #include <mtd/mtd-abi.h>
 #include <asm/bootinfo.h>
 #include <asm/reboot.h>
+#include <asm/setup.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/gpio-au1000.h>
 #include <asm/mach-au1x00/au1xxx_eth.h>
@@ -58,7 +59,7 @@ void __init prom_init(void)
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
 
-void prom_putchar(unsigned char c)
+void prom_putchar(char c)
 {
 	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }

arch/mips/alchemy/board-xxs1500.c

@@ -29,6 +29,7 @@
 #include <linux/pm.h>
 #include <asm/bootinfo.h>
 #include <asm/reboot.h>
+#include <asm/setup.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <prom.h>
 
@@ -55,7 +56,7 @@ void __init prom_init(void)
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
 
-void prom_putchar(unsigned char c)
+void prom_putchar(char c)
 {
 	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }

arch/mips/alchemy/devboards/platform.c

@@ -14,6 +14,7 @@
 #include <asm/bootinfo.h>
 #include <asm/idle.h>
 #include <asm/reboot.h>
+#include <asm/setup.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
 
@@ -36,7 +37,7 @@ void __init prom_init(void)
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
 
-void prom_putchar(unsigned char c)
+void prom_putchar(char c)
 {
 	if (alchemy_get_cputype() == ALCHEMY_CPU_AU1300)
 		alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c);

arch/mips/ar7/prom.c

@@ -25,6 +25,7 @@
 #include <linux/string.h>
 #include <linux/io.h>
 #include <asm/bootinfo.h>
+#include <asm/setup.h>
 
 #include <asm/mach-ar7/ar7.h>
 #include <asm/mach-ar7/prom.h>
@@ -259,10 +260,9 @@ static inline void serial_out(int offset, int value)
 	writel(value, (void *)PORT(offset));
 }
 
-int prom_putchar(char c)
+void prom_putchar(char c)
 {
 	while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0)
 		;
 	serial_out(UART_TX, c);
-	return 1;
 }

arch/mips/ath25/early_printk.c

@@ -9,6 +9,7 @@
 #include <linux/mm.h>
 #include <linux/io.h>
 #include <linux/serial_reg.h>
+#include <asm/setup.h>
 
 #include "devices.h"
 #include "ar2315_regs.h"
@@ -25,7 +26,7 @@ static inline unsigned char prom_uart_rr(void __iomem *base, unsigned reg)
 	return __raw_readl(base + 4 * reg);
 }
 
-void prom_putchar(unsigned char ch)
+void prom_putchar(char ch)
 {
 	static void __iomem *base;
 
@@ -38,7 +39,7 @@ void prom_putchar(unsigned char ch)
 
 	while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0)
 		;
-	prom_uart_wr(base, UART_TX, ch);
+	prom_uart_wr(base, UART_TX, (unsigned char)ch);
 	while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0)
 		;
 }

arch/mips/ath79/early_printk.c

@@ -13,12 +13,13 @@
 #include <linux/errno.h>
 #include <linux/serial_reg.h>
 #include <asm/addrspace.h>
+#include <asm/setup.h>
 
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
 #include <asm/mach-ath79/ar933x_uart.h>
 
-static void (*_prom_putchar) (unsigned char);
+static void (*_prom_putchar)(char);
 
 static inline void prom_putchar_wait(void __iomem *reg, u32 mask, u32 val)
 {
@@ -33,27 +34,28 @@ static inline void prom_putchar_wait(void __iomem *reg, u32 mask, u32 val)
 
 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
 
-static void prom_putchar_ar71xx(unsigned char ch)
+static void prom_putchar_ar71xx(char ch)
 {
 	void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE));
 
 	prom_putchar_wait(base + UART_LSR * 4, BOTH_EMPTY, BOTH_EMPTY);
-	__raw_writel(ch, base + UART_TX * 4);
+	__raw_writel((unsigned char)ch, base + UART_TX * 4);
 	prom_putchar_wait(base + UART_LSR * 4, BOTH_EMPTY, BOTH_EMPTY);
 }
 
-static void prom_putchar_ar933x(unsigned char ch)
+static void prom_putchar_ar933x(char ch)
 {
 	void __iomem *base = (void __iomem *)(KSEG1ADDR(AR933X_UART_BASE));
 
 	prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR,
 			  AR933X_UART_DATA_TX_CSR);
-	__raw_writel(AR933X_UART_DATA_TX_CSR | ch, base + AR933X_UART_DATA_REG);
+	__raw_writel(AR933X_UART_DATA_TX_CSR | (unsigned char)ch,
+		     base + AR933X_UART_DATA_REG);
 	prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR,
 			  AR933X_UART_DATA_TX_CSR);
 }
 
-static void prom_putchar_dummy(unsigned char ch)
+static void prom_putchar_dummy(char ch)
 {
 	/* nothing to do */
 }
@@ -92,7 +94,7 @@ static void prom_putchar_init(void)
 	}
 }
 
-void prom_putchar(unsigned char ch)
+void prom_putchar(char ch)
 {
 	if (!_prom_putchar)
 		prom_putchar_init();

arch/mips/bcm63xx/early_printk.c

@@ -8,6 +8,7 @@
 
 #include <bcm63xx_io.h>
 #include <linux/serial_bcm63xx.h>
+#include <asm/setup.h>
 
 static void wait_xfered(void)
 {

arch/mips/boot/compressed/uart-prom.c

@@ -1,6 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
-
-extern void prom_putchar(unsigned char ch);
+#include <asm/setup.h>
 
 void putc(char c)
 {

arch/mips/cavium-octeon/setup.c

@@ -36,6 +36,7 @@
 #include <asm/mipsregs.h>
 #include <asm/bootinfo.h>
 #include <asm/sections.h>
+#include <asm/setup.h>
 #include <asm/time.h>
 
 #include <asm/octeon/octeon.h>
@@ -1108,7 +1109,7 @@ void __init plat_mem_setup(void)
  * Emit one character to the boot UART.	 Exported for use by the
  * watchdog timer.
  */
-int prom_putchar(char c)
+void prom_putchar(char c)
 {
 	uint64_t lsrval;
 
@@ -1119,7 +1120,6 @@ int prom_putchar(char c)
 
 	/* Write the byte */
 	cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart), c & 0xffull);
-	return 1;
 }
 EXPORT_SYMBOL(prom_putchar);
 

arch/mips/fw/arc/arc_con.c

@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/fs.h>
+#include <asm/setup.h>
 #include <asm/sgialib.h>
 
 static void prom_console_write(struct console *co, const char *s,

arch/mips/fw/arc/promlib.c

@@ -9,6 +9,7 @@
 #include <linux/kernel.h>
 #include <asm/sgialib.h>
 #include <asm/bcache.h>
+#include <asm/setup.h>
 
 /*
  * IP22 boardcache is not compatible with board caches.	 Thus we disable it

arch/mips/fw/sni/sniprom.c

@@ -19,6 +19,7 @@
 #include <asm/mipsprom.h>
 #include <asm/mipsregs.h>
 #include <asm/bootinfo.h>
+#include <asm/setup.h>
 
 /* special SNI prom calls */
 /*

arch/mips/include/asm/setup.h

@@ -2,8 +2,10 @@
 #ifndef _MIPS_SETUP_H
 #define _MIPS_SETUP_H
 
+#include <linux/types.h>
 #include <uapi/asm/setup.h>
 
+extern void prom_putchar(char);
 extern void setup_early_printk(void);
 
 #ifdef CONFIG_EARLY_PRINTK_8250

arch/mips/include/asm/sgialib.h

@@ -31,7 +31,6 @@ extern int prom_flags;
 #define PROM_FLAG_DONT_FREE_TEMP	4
 
 /* Simple char-by-char console I/O. */
-extern void prom_putchar(char c);
 extern char prom_getchar(void);
 
 /* Get next memory descriptor after CURR, returns first descriptor

arch/mips/include/asm/txx9/generic.h

@@ -49,7 +49,6 @@ void txx9_spi_init(int busid, unsigned long base, int irq);
 void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr);
 void txx9_sio_init(unsigned long baseaddr, int irq,
 		   unsigned int line, unsigned int sclk, int nocts);
-void prom_putchar(char c);
 #ifdef CONFIG_EARLY_PRINTK
 extern void (*txx9_prom_putchar)(char c);
 void txx9_sio_putchar_init(unsigned long baseaddr);

arch/mips/kernel/early_printk.c

@@ -14,8 +14,6 @@
 
 #include <asm/setup.h>
 
-extern void prom_putchar(char);
-
 static void early_console_write(struct console *con, const char *s, unsigned n)
 {
 	while (n-- && *s) {

arch/mips/kernel/early_printk_8250.c

@@ -20,6 +20,7 @@
 #include <linux/io.h>
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
+#include <asm/setup.h>
 
 static void __iomem *serial8250_base;
 static unsigned int serial8250_reg_shift;

arch/mips/lantiq/early_printk.c

@@ -8,6 +8,7 @@
 
 #include <linux/cpu.h>
 #include <lantiq_soc.h>
+#include <asm/setup.h>
 
 #define ASC_BUF		1024
 #define LTQ_ASC_FSTAT	((u32 *)(LTQ_EARLY_ASC + 0x0048))

arch/mips/lasat/prom.c

@@ -13,6 +13,7 @@
 #include <asm/bootinfo.h>
 #include <asm/lasat/lasat.h>
 #include <asm/cpu.h>
+#include <asm/setup.h>
 
 #include "at93c.h"
 #include <asm/lasat/eeprom.h>

arch/mips/loongson64/common/early_printk.c

@@ -10,6 +10,7 @@
  *  option) any later version.
  */
 #include <linux/serial_reg.h>
+#include <asm/setup.h>
 
 #include <loongson.h>
 

arch/mips/netlogic/common/earlycons.c

@@ -36,6 +36,7 @@
 #include <linux/serial_reg.h>
 
 #include <asm/mipsregs.h>
+#include <asm/setup.h>
 #include <asm/netlogic/haldefs.h>
 #include <asm/netlogic/common.h>
 

arch/mips/paravirt/serial.c

@@ -9,16 +9,15 @@
 #include <linux/kernel.h>
 #include <linux/virtio_console.h>
 #include <linux/kvm_para.h>
+#include <asm/setup.h>
 
 /*
  * Emit one character to the boot console.
  */
-int prom_putchar(char c)
+void prom_putchar(char c)
 {
 	kvm_hypercall3(KVM_HC_MIPS_CONSOLE_OUTPUT, 0 /*  port 0 */,
 		(unsigned long)&c, 1 /* len == 1 */);
-
-	return 1;
 }
 
 #ifdef CONFIG_VIRTIO_CONSOLE

arch/mips/pic32/pic32mzda/early_console.c

@@ -13,6 +13,7 @@
  */
 #include <asm/mach-pic32/pic32.h>
 #include <asm/fw/fw.h>
+#include <asm/setup.h>
 
 #include "pic32mzda.h"
 #include "early_pin.h"
@@ -157,7 +158,7 @@ void __init fw_init_early_console(char port)
 	setup_early_console(port, baud);
 }
 
-int prom_putchar(char c)
+void prom_putchar(char c)
 {
 	if (console_port >= 0) {
 		while (__raw_readl(
@@ -166,6 +167,4 @@ int prom_putchar(char c)
 
 		__raw_writel(c, uart_base + U_TXR(console_port));
 	}
-
-	return 1;
 }

arch/mips/ralink/early_printk.c

@@ -10,6 +10,7 @@
 #include <linux/serial_reg.h>
 
 #include <asm/addrspace.h>
+#include <asm/setup.h>
 
 #ifdef CONFIG_SOC_RT288X
 #define EARLY_UART_BASE		0x300c00
@@ -68,7 +69,7 @@ static void find_uart_base(void)
 	}
 }
 
-void prom_putchar(unsigned char ch)
+void prom_putchar(char ch)
 {
 	if (!init_complete) {
 		find_uart_base();
@@ -76,13 +77,13 @@ void prom_putchar(unsigned char ch)
 	}
 
 	if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) {
-		uart_w32(ch, UART_TX);
+		uart_w32((unsigned char)ch, UART_TX);
 		while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
 			;
 	} else {
 		while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0)
 			;
-		uart_w32(ch, UART_REG_TX);
+		uart_w32((unsigned char)ch, UART_REG_TX);
 		while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0)
 			;
 	}

arch/mips/sgi-ip27/ip27-console.c

@@ -7,6 +7,7 @@
  */
 
 #include <asm/page.h>
+#include <asm/setup.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/sn0/hub.h>
 #include <asm/sn/klconfig.h>

arch/mips/sibyte/common/cfe.c

@@ -27,6 +27,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/reboot.h>
+#include <asm/setup.h>
 #include <asm/sibyte/board.h>
 #include <asm/smp-ops.h>
 

arch/mips/txx9/generic/setup.c

@@ -32,6 +32,7 @@
 #include <asm/reboot.h>
 #include <asm/r4kcache.h>
 #include <asm/sections.h>
+#include <asm/setup.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
 #include <asm/txx9tmr.h>