korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 00:34:20 +08:00
Code Issues Packages Projects Releases Wiki Activity

soc: xilinx: vcu: register PLL as fixed rate clock

Browse Source 
Currently, xvcu_pll_set_rate configures the PLL to a clock rate that is
pre-calculated when probing the driver. To still make the clock
framework aware of the PLL and to allow to configure other clocks based
on the PLL rate, register the PLL as a fixed rate clock.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-8-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This commit is contained in:
Michael Tretter 2021-01-21 08:16:51 +01:00 committed by Stephen Boyd
parent f1bc982e7c
commit 5a2b2e1341
2 changed files with 19 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/soc/xilinx/Kconfig
View File

@ -3,7 +3,7 @@ menu "Xilinx SoC drivers"
config XILINX_VCU
tristate "Xilinx VCU logicoreIP Init"
depends on HAS_IOMEM
depends on HAS_IOMEM && COMMON_CLK
select REGMAP_MMIO
help
Provides the driver to enable and disable the isolation between the

19
drivers/soc/xilinx/xlnx_vcu.c
View File

@ -7,6 +7,7 @@
* Contacts Dhaval Shah <dshah@xilinx.com>
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/io.h>
@ -73,6 +74,7 @@
* @aclk: axi clock source
* @logicore_reg_ba: logicore reg base address
* @vcu_slcr_ba: vcu_slcr Register base address
* @pll: handle for the VCU PLL
*/
struct xvcu_device {
struct device *dev;
@ -80,6 +82,7 @@ struct xvcu_device {
struct clk *aclk;
struct regmap *logicore_reg_ba;
void __iomem *vcu_slcr_ba;
struct clk_hw *pll;
};
static struct regmap_config vcu_settings_regmap_config = {
@ -403,7 +406,9 @@ static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu)
u32 clkoutdiv, vcu_pll_ctrl, pll_clk;
u32 mod, ctrl;
int i;
int ret;
const struct xvcu_pll_cfg *found = NULL;
struct clk_hw *hw;
regmap_read(xvcu->logicore_reg_ba, VCU_PLL_CLK, &inte);
regmap_read(xvcu->logicore_reg_ba, VCU_PLL_CLK_DEC, &deci);
@ -505,7 +510,18 @@ static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu)
ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT;
xvcu_write(xvcu->vcu_slcr_ba, VCU_DEC_MCU_CTRL, ctrl);
return xvcu_pll_set_rate(xvcu, fvco, refclk);
ret = xvcu_pll_set_rate(xvcu, fvco, refclk);
if (ret)
return ret;
hw = clk_hw_register_fixed_rate(xvcu->dev, "vcu_pll",
__clk_get_name(xvcu->pll_ref),
0, pll_clk);
if (IS_ERR(hw))
return PTR_ERR(hw);
xvcu->pll = hw;
return 0;
}
/**
@ -652,6 +668,7 @@ static int xvcu_remove(struct platform_device *pdev)
/* Add the the Gasket isolation and put the VCU in reset. */
regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0);
clk_hw_unregister_fixed_rate(xvcu->pll);
xvcu_pll_disable(xvcu);
clk_disable_unprepare(xvcu->aclk);