mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-08 11:34:11 +08:00
arm64: dts: rockchip: add SoQuartz CM4IO dts
This is the initial SoQuartz SoM device tree on a CM4IO carrier board. This board outputs debug on uart2 and supports the following components: Gigabit Ethernet USB2 (OTG/Host shared) PCIe 2.0 x1 HDMI (HDMI Port 0) eDP (HDMI Port 1) DSI (RPi compatible pinout) CSI (RPi compatible pinout) A/B/G/N WiFi Bluetooth SDMMC eMMC SPI NOR Flash (Not placed) PI-40 compatible pin header Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20220429115252.2360496-7-pgwipeout@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Peter Geis
Heiko Stuebner
parent
dcc8c66bef
commit
5859b5a9c3
@ -60,6 +60,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
|
||||
|
||||
177
arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
Normal file
177
arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
Normal file
@ -0,0 +1,177 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3566-soquartz.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
|
||||
compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
|
||||
|
||||
/* labeled +12v in schematic */
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
/* labeled +5v in schematic */
|
||||
vcc_5v: vcc-5v-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_5v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c1 is exposed on CM1 / Module1A
|
||||
* pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
|
||||
* pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
|
||||
*/
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
/*
|
||||
* the rtc interrupt is tied to PMIC_PWRON,
|
||||
* it will force reset the board if triggered.
|
||||
*/
|
||||
pcf85063: rtc@51 {
|
||||
compatible = "nxp,pcf85063";
|
||||
reg = <0x51>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c2 is exposed on CM1 / Module1A - to PI40
|
||||
* pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
|
||||
* pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
|
||||
*/
|
||||
&i2c2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c3 is exposed on CM1 / Module1A - to PI40
|
||||
* pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
|
||||
* pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
|
||||
*/
|
||||
&i2c3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c4 is exposed on CM2 / Module1B - to PI40
|
||||
* pin 45 - GPIO24 - i2c4_scl_m1
|
||||
* pin 47 - GPIO23 - i2c4_sda_m1
|
||||
*/
|
||||
&i2c4 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2s1_8ch is exposed on CM1 / Module1A - to PI40
|
||||
* pin 24 - GPIO26 - i2s1_sdi1_m1
|
||||
* pin 25 - GPIO21 - i2s1_sdo0_m1
|
||||
* pin 26 - GPIO19 - i2s1_lrck_tx_m1
|
||||
* pin 27 - GPIO20 - i2s1_sdi0_m1
|
||||
* pin 29 - GPIO16 - i2s1_sdi3_m1
|
||||
* pin 30 - GPIO6 - i2s1_sdi2_m1
|
||||
* pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3
|
||||
* pin 41 - GPIO25 - i2s1_sdo2_m1
|
||||
* pin 49 - GPIO18 - i2s1_sclk_tx_m1
|
||||
* pin 50 - GPIO17 - i2s1_mclk_m1
|
||||
* pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2
|
||||
*/
|
||||
&i2s1_8ch {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&led_diy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&led_work {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rgmii_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* saradc is exposed on CM1 / Module1A - to J2
|
||||
* pin 94 - AIN1 - saradc_vin3
|
||||
* pin 96 - AIN0 - saradc_vin2
|
||||
*/
|
||||
&saradc {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
vmmc-supply = <&sdmmc_pwr>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc_pwr {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* spi3 is exposed on CM1 / Module1A - to PI40
|
||||
* pin 37 - GPIO7 - spi3_cs1_m0
|
||||
* pin 38 - GPIO11 - spi3_clk_m0
|
||||
* pin 39 - GPIO8 - spi3_cs0_m0
|
||||
* pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch
|
||||
* pin 44 - GPIO10 - spi3_mosi_m0
|
||||
*/
|
||||
&spi3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* uart2 is exposed on CM1 / Module1A - to PI40
|
||||
* pin 51 - GPIO15 - uart2_rx_m0
|
||||
* pin 55 - GPIO14 - uart2_tx_m0
|
||||
*/
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* uart7 is exposed on CM1 / Module1A - to PI40
|
||||
* pin 46 - GPIO22 - uart7_tx_m2
|
||||
* pin 47 - GPIO23 - uart7_rx_m2
|
||||
*/
|
||||
&uart7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc_5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vbus {
|
||||
vin-supply = <&vcc_5v>;
|
||||
};
|
||||
616
arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
Normal file
616
arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
Normal file
@ -0,0 +1,616 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Pine64 RK3566 SoQuartz SOM";
|
||||
compatible = "pine64,soquartz", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
mmc0 = &sdmmc0;
|
||||
mmc1 = &sdhci;
|
||||
mmc2 = &sdmmc1;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
gmac1_clkin: external-gmac1-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "gmac1_clkin";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_diy: led-diy {
|
||||
label = "diy-led";
|
||||
default-state = "on";
|
||||
gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&diy_led_enable_h>;
|
||||
retain-state-suspended;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
led_work: led-work {
|
||||
label = "work-led";
|
||||
default-state = "off";
|
||||
gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&work_led_enable_h>;
|
||||
retain-state-suspended;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
status = "okay";
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vbus: vbus-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbus";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
/* sourced from vbus, vbus is provided by the carrier board */
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vbus>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
sdmmc_pwr: sdmmc-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_pwr_h>;
|
||||
regulator-name = "sdmmc_pwr";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
|
||||
clock_in_out = "input";
|
||||
phy-supply = <&vcc_3v3>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m0_miim
|
||||
&gmac1m0_tx_bus2
|
||||
&gmac1m0_rx_bus2
|
||||
&gmac1m0_rgmii_clk
|
||||
&gmac1m0_clkinout
|
||||
&gmac1m0_rgmii_bus>;
|
||||
snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f, also works well here */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
tx_delay = <0x30>;
|
||||
rx_delay = <0x10>;
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
status = "disabled";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c1 is exposed on CM1 / Module1A
|
||||
* pin 80 - i2c1_scl_m0, pullup to vcc3v3_pmu
|
||||
* pin 82 - i2c1_sda_m0, pullup to vcc3v3_pmu
|
||||
*/
|
||||
&i2c1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c2 is exposed on CM1 / Module1A
|
||||
* pin 56 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
|
||||
* pin 58 - i2c2_sda_m1, pullup to vcc_3v3
|
||||
*/
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2m1_xfer>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c3 is exposed on CM1 / Module1A
|
||||
* pin 35 - i2c3_scl_m0, pullup to vcc_3v3
|
||||
* pin 36 - i2c3_sda_m0, pullup to vcc_3v3
|
||||
*/
|
||||
&i2c3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c4 is exposed on CM2 / Module1B
|
||||
* pin 45 - i2c4_scl_m1
|
||||
* pin 47 - i2c4_sda_m1
|
||||
*/
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4m1_xfer>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2s1_8ch is exposed on CM1 / Module1A
|
||||
* pin 24 - i2s1_sdi1_m1
|
||||
* pin 25 - i2s1_sdo0_m1
|
||||
* pin 26 - i2s1_lrck_tx_m1
|
||||
* pin 27 - i2s1_sdi0_m1
|
||||
* pin 29 - i2s1_sdi3_m1
|
||||
* pin 30 - i2s1_sdi2_m1
|
||||
* pin 40 - i2s1_sdo1_m1, shared with spi3
|
||||
* pin 41 - i2s1_sdo2_m1
|
||||
* pin 49 - i2s1_sclk_tx_m1
|
||||
* pin 50 - i2s1_mclk_m1
|
||||
* pin 56 - i2s1_sdo3_m1, shared with i2c2
|
||||
*/
|
||||
&i2s1_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s1m1_sclktx &i2s1m1_sclkrx
|
||||
&i2s1m1_lrcktx &i2s1m1_lrckrx
|
||||
&i2s1m1_sdi0 &i2s1m1_sdi1
|
||||
&i2s1m1_sdi2 &i2s1m1_sdi3
|
||||
&i2s1m1_sdo0 &i2s1m1_sdo1
|
||||
&i2s1m1_sdo2 &i2s1m1_sdo3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bt {
|
||||
bt_enable_h: bt-enable-h {
|
||||
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_host_wake_l: bt-host-wake-l {
|
||||
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
bt_wake_l: bt-wake-l {
|
||||
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
work_led_enable_h: work-led-enable-h {
|
||||
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
diy_led_enable_h: diy-led-enable-h {
|
||||
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc-pwr {
|
||||
sdmmc_pwr_h: sdmmc-pwr-h {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vcc_3v3>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_3v3>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* saradc is exposed on CM1 / Module1A
|
||||
* pin 94 - saradc_vin3
|
||||
* pin 96 - saradc_vin2
|
||||
*/
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
broken-cd;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sys>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* spi3 is exposed on CM1 / Module1A
|
||||
* pin 37 - spi3_cs1_m0
|
||||
* pin 38 - spi3_clk_m0
|
||||
* pin 39 - spi3_cs0_m0
|
||||
* pin 40 - spi3_miso_m0, shared with i2s1_8ch
|
||||
* pin 44 - spi3_mosi_m0
|
||||
*/
|
||||
&spi3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
|
||||
vbat-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcca1v8_pmu>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* uart2 is exposed on CM1 / Module1A
|
||||
* pin 51 - uart2_rx_m0
|
||||
* pin 55 - uart2_tx_m0
|
||||
*/
|
||||
&uart2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* uart7 is exposed on CM1 / Module1A
|
||||
* pin 46 - uart7_tx_m2
|
||||
* pin 47 - uart7_rx_m2
|
||||
*/
|
||||
&uart7 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart7m2_xfer>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* dwc3_otg is the only usb port available */
|
||||
&usb2phy0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
status = "disabled";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user