mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-25 21:24:08 +08:00
[ALSA] sound/: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This commit is contained in:
parent
f488d9fcc8
commit
561de31a23
@ -455,7 +455,7 @@ static void snd_uart16550_do_open(struct snd_uart16550 * uart)
|
||||
| UART_IER_THRI /* Enable Transmitter holding register empty interrupt */
|
||||
;
|
||||
}
|
||||
outb(byte, uart->base + UART_IER); /* Interupt enable Register */
|
||||
outb(byte, uart->base + UART_IER); /* Interrupt enable Register */
|
||||
|
||||
inb(uart->base + UART_LSR); /* Clear any pre-existing overrun indication */
|
||||
inb(uart->base + UART_IIR); /* Clear any pre-existing transmit interrupt */
|
||||
@ -473,7 +473,7 @@ static void snd_uart16550_do_close(struct snd_uart16550 * uart)
|
||||
|
||||
outb((0 & UART_IER_RDI) /* Disable Receiver data interrupt */
|
||||
|(0 & UART_IER_THRI) /* Disable Transmitter holding register empty interrupt */
|
||||
,uart->base + UART_IER); /* Interupt enable Register */
|
||||
,uart->base + UART_IER); /* Interrupt enable Register */
|
||||
|
||||
switch (uart->adaptor) {
|
||||
default:
|
||||
@ -653,7 +653,7 @@ static void snd_uart16550_output_write(struct snd_rawmidi_substream *substream)
|
||||
char first;
|
||||
static unsigned long lasttime = 0;
|
||||
|
||||
/* Interupts are disabled during the updating of the tx_buff,
|
||||
/* Interrupts are disabled during the updating of the tx_buff,
|
||||
* since it is 'bad' to have two processes updating the same
|
||||
* variables (ie buff_in & buff_out)
|
||||
*/
|
||||
|
@ -163,7 +163,7 @@ struct snd_audiodrive {
|
||||
#define ES18XX_DUPLEX_SAME 0x0010 /* Playback and record must share the same rate */
|
||||
#define ES18XX_NEW_RATE 0x0020 /* More precise rate setting */
|
||||
#define ES18XX_AUXB 0x0040 /* AuxB mixer control */
|
||||
#define ES18XX_HWV 0x0080 /* Has seperate hardware volume mixer controls*/
|
||||
#define ES18XX_HWV 0x0080 /* Has separate hardware volume mixer controls*/
|
||||
#define ES18XX_MONO 0x0100 /* Mono_in mixer control */
|
||||
#define ES18XX_I2S 0x0200 /* I2S mixer control */
|
||||
#define ES18XX_MUTEREC 0x0400 /* Record source can be muted */
|
||||
|
@ -2395,7 +2395,7 @@ static irqreturn_t vortex_interrupt(int irq, void *dev_id)
|
||||
if (!(hwread(vortex->mmio, VORTEX_STAT) & 0x1))
|
||||
return IRQ_NONE;
|
||||
|
||||
// This is the Interrrupt Enable flag we set before (consistency check).
|
||||
// This is the Interrupt Enable flag we set before (consistency check).
|
||||
if (!(hwread(vortex->mmio, VORTEX_CTRL) & CTRL_IRQ_ENABLE))
|
||||
return IRQ_NONE;
|
||||
|
||||
|
@ -8,7 +8,7 @@
|
||||
* - Sometimes the SPDIF input DSP tasks get's unsynchronized
|
||||
* and the SPDIF get somewhat "distorcionated", or/and left right channel
|
||||
* are swapped. To get around this problem when it happens, mute and unmute
|
||||
* the SPDIF input mixer controll.
|
||||
* the SPDIF input mixer control.
|
||||
* - On the Hercules Game Theater XP the amplifier are sometimes turned
|
||||
* off on inadecuate moments which causes distorcions on sound.
|
||||
*
|
||||
|
@ -418,7 +418,7 @@ struct hda_bus_ops {
|
||||
/* free the private data */
|
||||
void (*private_free)(struct hda_bus *);
|
||||
#ifdef CONFIG_SND_HDA_POWER_SAVE
|
||||
/* notify power-up/down from codec to contoller */
|
||||
/* notify power-up/down from codec to controller */
|
||||
void (*pm_notify)(struct hda_codec *codec);
|
||||
#endif
|
||||
};
|
||||
|
@ -3604,7 +3604,7 @@ static int snd_hdsp_set_defaults(struct hdsp *hdsp)
|
||||
|
||||
/* ASSUMPTION: hdsp->lock is either held, or
|
||||
there is no need to hold it (e.g. during module
|
||||
initalization).
|
||||
initialization).
|
||||
*/
|
||||
|
||||
/* set defaults:
|
||||
|
@ -3348,7 +3348,7 @@ static int snd_hdspm_set_defaults(struct hdspm * hdspm)
|
||||
unsigned int i;
|
||||
|
||||
/* ASSUMPTION: hdspm->lock is either held, or there is no need to
|
||||
hold it (e.g. during module initalization).
|
||||
hold it (e.g. during module initialization).
|
||||
*/
|
||||
|
||||
/* set defaults: */
|
||||
@ -3416,7 +3416,7 @@ static int snd_hdspm_set_defaults(struct hdspm * hdspm)
|
||||
|
||||
|
||||
/*------------------------------------------------------------
|
||||
interupt
|
||||
interrupt
|
||||
------------------------------------------------------------*/
|
||||
|
||||
static irqreturn_t snd_hdspm_interrupt(int irq, void *dev_id)
|
||||
|
@ -148,7 +148,7 @@ MODULE_SUPPORTED_DEVICE("{{RME,Hammerfall},"
|
||||
#define RME9652_start_bit (1<<0) /* start record/play */
|
||||
/* bits 1-3 encode buffersize/latency */
|
||||
#define RME9652_Master (1<<4) /* Clock Mode Master=1,Slave/Auto=0 */
|
||||
#define RME9652_IE (1<<5) /* Interupt Enable */
|
||||
#define RME9652_IE (1<<5) /* Interrupt Enable */
|
||||
#define RME9652_freq (1<<6) /* samplerate 0=44.1/88.2, 1=48/96 kHz */
|
||||
#define RME9652_freq1 (1<<7) /* if 0, 32kHz, else always 1 */
|
||||
#define RME9652_DS (1<<8) /* Doule Speed 0=44.1/48, 1=88.2/96 Khz */
|
||||
@ -1826,7 +1826,7 @@ static void snd_rme9652_set_defaults(struct snd_rme9652 *rme9652)
|
||||
|
||||
/* ASSUMPTION: rme9652->lock is either held, or
|
||||
there is no need to hold it (e.g. during module
|
||||
initalization).
|
||||
initialization).
|
||||
*/
|
||||
|
||||
/* set defaults:
|
||||
|
@ -436,7 +436,7 @@ static void snd_trident_free_synth_channel(struct snd_trident *trident, int chan
|
||||
Description: This routine will complete and write the 5 hardware channel
|
||||
registers to hardware.
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave.
|
||||
Parameters: trident - pointer to target device class for 4DWave.
|
||||
voice - synthesizer voice structure
|
||||
Each register field.
|
||||
|
||||
@ -514,7 +514,7 @@ EXPORT_SYMBOL(snd_trident_write_voice_regs);
|
||||
Description: This routine will write the new CSO offset
|
||||
register to hardware.
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave.
|
||||
Parameters: trident - pointer to target device class for 4DWave.
|
||||
voice - synthesizer voice structure
|
||||
CSO - new CSO value
|
||||
|
||||
@ -540,7 +540,7 @@ static void snd_trident_write_cso_reg(struct snd_trident * trident,
|
||||
Description: This routine will write the new ESO offset
|
||||
register to hardware.
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave.
|
||||
Parameters: trident - pointer to target device class for 4DWave.
|
||||
voice - synthesizer voice structure
|
||||
ESO - new ESO value
|
||||
|
||||
@ -566,7 +566,7 @@ static void snd_trident_write_eso_reg(struct snd_trident * trident,
|
||||
Description: This routine will write the new voice volume
|
||||
register to hardware.
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave.
|
||||
Parameters: trident - pointer to target device class for 4DWave.
|
||||
voice - synthesizer voice structure
|
||||
Vol - new voice volume
|
||||
|
||||
@ -597,7 +597,7 @@ static void snd_trident_write_vol_reg(struct snd_trident * trident,
|
||||
Description: This routine will write the new voice pan
|
||||
register to hardware.
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave.
|
||||
Parameters: trident - pointer to target device class for 4DWave.
|
||||
voice - synthesizer voice structure
|
||||
Pan - new pan value
|
||||
|
||||
@ -619,7 +619,7 @@ static void snd_trident_write_pan_reg(struct snd_trident * trident,
|
||||
Description: This routine will write the new reverb volume
|
||||
register to hardware.
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave.
|
||||
Parameters: trident - pointer to target device class for 4DWave.
|
||||
voice - synthesizer voice structure
|
||||
RVol - new reverb volume
|
||||
|
||||
@ -643,7 +643,7 @@ static void snd_trident_write_rvol_reg(struct snd_trident * trident,
|
||||
Description: This routine will write the new chorus volume
|
||||
register to hardware.
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave.
|
||||
Parameters: trident - pointer to target device class for 4DWave.
|
||||
voice - synthesizer voice structure
|
||||
CVol - new chorus volume
|
||||
|
||||
@ -666,7 +666,7 @@ static void snd_trident_write_cvol_reg(struct snd_trident * trident,
|
||||
|
||||
Description: This routine converts rate in HZ to hardware delta value.
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave.
|
||||
Parameters: trident - pointer to target device class for 4DWave.
|
||||
rate - Real or Virtual channel number.
|
||||
|
||||
Returns: Delta value.
|
||||
@ -696,7 +696,7 @@ static unsigned int snd_trident_convert_rate(unsigned int rate)
|
||||
|
||||
Description: This routine converts rate in HZ to hardware delta value.
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave.
|
||||
Parameters: trident - pointer to target device class for 4DWave.
|
||||
rate - Real or Virtual channel number.
|
||||
|
||||
Returns: Delta value.
|
||||
@ -726,7 +726,7 @@ static unsigned int snd_trident_convert_adc_rate(unsigned int rate)
|
||||
|
||||
Description: This routine converts rate in HZ to spurious threshold.
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave.
|
||||
Parameters: trident - pointer to target device class for 4DWave.
|
||||
rate - Real or Virtual channel number.
|
||||
|
||||
Returns: Delta value.
|
||||
@ -748,7 +748,7 @@ static unsigned int snd_trident_spurious_threshold(unsigned int rate,
|
||||
|
||||
Description: This routine returns a control mode for a PCM channel.
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave.
|
||||
Parameters: trident - pointer to target device class for 4DWave.
|
||||
substream - PCM substream
|
||||
|
||||
Returns: Control value.
|
||||
@ -781,7 +781,7 @@ static unsigned int snd_trident_control_mode(struct snd_pcm_substream *substream
|
||||
|
||||
Description: Device I/O control handler for playback/capture parameters.
|
||||
|
||||
Paramters: substream - PCM substream class
|
||||
Parameters: substream - PCM substream class
|
||||
cmd - what ioctl message to process
|
||||
arg - additional message infoarg
|
||||
|
||||
@ -1664,7 +1664,7 @@ static snd_pcm_uframes_t snd_trident_playback_pointer(struct snd_pcm_substream *
|
||||
|
||||
Description: This routine return the capture position
|
||||
|
||||
Paramters: pcm1 - PCM device class
|
||||
Parameters: pcm1 - PCM device class
|
||||
|
||||
Returns: position of buffer
|
||||
|
||||
@ -2157,7 +2157,7 @@ static struct snd_pcm_ops snd_trident_spdif_7018_ops = {
|
||||
|
||||
Description: This routine registers the 4DWave device for PCM support.
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave.
|
||||
Parameters: trident - pointer to target device class for 4DWave.
|
||||
|
||||
Returns: None
|
||||
|
||||
@ -2215,7 +2215,7 @@ int __devinit snd_trident_pcm(struct snd_trident * trident,
|
||||
|
||||
Description: This routine registers the 4DWave device for foldback PCM support.
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave.
|
||||
Parameters: trident - pointer to target device class for 4DWave.
|
||||
|
||||
Returns: None
|
||||
|
||||
@ -2272,7 +2272,7 @@ int __devinit snd_trident_foldback_pcm(struct snd_trident * trident,
|
||||
|
||||
Description: This routine registers the 4DWave-NX device for SPDIF support.
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave-NX.
|
||||
Parameters: trident - pointer to target device class for 4DWave-NX.
|
||||
|
||||
Returns: None
|
||||
|
||||
@ -2956,7 +2956,7 @@ static int snd_trident_pcm_mixer_free(struct snd_trident *trident, struct snd_tr
|
||||
|
||||
Description: This routine registers the 4DWave device for mixer support.
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave.
|
||||
Parameters: trident - pointer to target device class for 4DWave.
|
||||
|
||||
Returns: None
|
||||
|
||||
@ -3338,7 +3338,7 @@ static int snd_trident_dev_free(struct snd_device *device)
|
||||
Description: Allocate and set up the TLB page table on 4D NX.
|
||||
Each entry has 4 bytes (physical PCI address).
|
||||
|
||||
Paramters: trident - pointer to target device class for 4DWave.
|
||||
Parameters: trident - pointer to target device class for 4DWave.
|
||||
|
||||
Returns: 0 or negative error code
|
||||
|
||||
@ -3515,7 +3515,7 @@ static int snd_trident_sis_init(struct snd_trident *trident)
|
||||
Description: This routine will create the device specific class for
|
||||
the 4DWave card. It will also perform basic initialization.
|
||||
|
||||
Paramters: card - which card to create
|
||||
Parameters: card - which card to create
|
||||
pci - interface to PCI bus resource info
|
||||
dma1ptr - playback dma buffer
|
||||
dma2ptr - capture dma buffer
|
||||
@ -3661,7 +3661,7 @@ int __devinit snd_trident_create(struct snd_card *card,
|
||||
Description: This routine will free the device specific class for
|
||||
the 4DWave card.
|
||||
|
||||
Paramters: trident - device specific private data for 4DWave card
|
||||
Parameters: trident - device specific private data for 4DWave card
|
||||
|
||||
Returns: None.
|
||||
|
||||
@ -3699,7 +3699,7 @@ static int snd_trident_free(struct snd_trident *trident)
|
||||
|
||||
Description: ISR for Trident 4DWave device
|
||||
|
||||
Paramters: trident - device specific private data for 4DWave card
|
||||
Parameters: trident - device specific private data for 4DWave card
|
||||
|
||||
Problems: It seems that Trident chips generates interrupts more than
|
||||
one time in special cases. The spurious interrupts are
|
||||
|
Loading…
Reference in New Issue
Block a user