diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index d126bb877250..280e933d27e7 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -20,6 +20,8 @@ #ifndef HPSA_CMD_H #define HPSA_CMD_H +#include + /* general boundary defintions */ #define SENSEINFOBYTES 32 /* may vary between hbas */ #define SG_ENTRIES_IN_CMD 32 /* Max SG entries excluding chain blocks */ @@ -200,12 +202,10 @@ union u64bit { MAX_EXT_TARGETS + 1) /* + 1 is for the controller itself */ /* SCSI-3 Commands */ -#pragma pack(1) - #define HPSA_INQUIRY 0x12 struct InquiryData { u8 data_byte[36]; -}; +} __packed; #define HPSA_REPORT_LOG 0xc2 /* Report Logical LUNs */ #define HPSA_REPORT_PHYS 0xc3 /* Report Physical LUNs */ @@ -221,7 +221,7 @@ struct raid_map_disk_data { u8 xor_mult[2]; /**< XOR multipliers for this position, * valid for data disks only */ u8 reserved[2]; -}; +} __packed; struct raid_map_data { __le32 structure_size; /* Size of entire structure in bytes */ @@ -247,14 +247,14 @@ struct raid_map_data { __le16 dekindex; /* Data encryption key index. */ u8 reserved[16]; struct raid_map_disk_data data[RAID_MAP_MAX_ENTRIES]; -}; +} __packed; struct ReportLUNdata { u8 LUNListLength[4]; u8 extended_response_flag; u8 reserved[3]; u8 LUN[HPSA_MAX_LUN][8]; -}; +} __packed; struct ext_report_lun_entry { u8 lunid[8]; @@ -269,20 +269,20 @@ struct ext_report_lun_entry { u8 lun_count; /* multi-lun device, how many luns */ u8 redundant_paths; u32 ioaccel_handle; /* ioaccel1 only uses lower 16 bits */ -}; +} __packed; struct ReportExtendedLUNdata { u8 LUNListLength[4]; u8 extended_response_flag; u8 reserved[3]; struct ext_report_lun_entry LUN[HPSA_MAX_PHYS_LUN]; -}; +} __packed; struct SenseSubsystem_info { u8 reserved[36]; u8 portname[8]; u8 reserved1[1108]; -}; +} __packed; /* BMIC commands */ #define BMIC_READ 0x26 @@ -317,7 +317,7 @@ union SCSI3Addr { u8 Targ:6; u8 Mode:2; /* b10 */ } LogUnit; -}; +} __packed; struct PhysDevAddr { u32 TargetId:24; @@ -325,20 +325,20 @@ struct PhysDevAddr { u32 Mode:2; /* 2 level target device addr */ union SCSI3Addr Target[2]; -}; +} __packed; struct LogDevAddr { u32 VolId:30; u32 Mode:2; u8 reserved[4]; -}; +} __packed; union LUNAddr { u8 LunAddrBytes[8]; union SCSI3Addr SCSI3Lun[4]; struct PhysDevAddr PhysDev; struct LogDevAddr LogDev; -}; +} __packed; struct CommandListHeader { u8 ReplyQueue; @@ -346,7 +346,7 @@ struct CommandListHeader { __le16 SGTotal; __le64 tag; union LUNAddr LUN; -}; +} __packed; struct RequestBlock { u8 CDBLen; @@ -365,18 +365,18 @@ struct RequestBlock { #define GET_DIR(tad) (((tad) >> 6) & 0x03) u16 Timeout; u8 CDB[16]; -}; +} __packed; struct ErrDescriptor { __le64 Addr; __le32 Len; -}; +} __packed; struct SGDescriptor { __le64 Addr; __le32 Len; __le32 Ext; -}; +} __packed; union MoreErrInfo { struct { @@ -390,7 +390,8 @@ union MoreErrInfo { u8 offense_num; /* byte # of offense 0-base */ u32 offense_value; } Invalid_Cmd; -}; +} __packed; + struct ErrorInfo { u8 ScsiStatus; u8 SenseLen; @@ -398,7 +399,7 @@ struct ErrorInfo { u32 ResidualCnt; union MoreErrInfo MoreErrInfo; u8 SenseInfo[SENSEINFOBYTES]; -}; +} __packed; /* Command types */ #define CMD_IOCTL_PEND 0x01 #define CMD_SCSI 0x03 @@ -451,7 +452,7 @@ struct CommandList { bool retry_pending; struct hpsa_scsi_dev_t *device; atomic_t refcount; /* Must be last to avoid memset in hpsa_cmd_init() */ -} __aligned(COMMANDLIST_ALIGNMENT); +} __packed __aligned(COMMANDLIST_ALIGNMENT); /* Max S/G elements in I/O accelerator command */ #define IOACCEL1_MAXSGENTRIES 24 @@ -489,7 +490,7 @@ struct io_accel1_cmd { __le64 host_addr; /* 0x70 - 0x77 */ u8 CISS_LUN[8]; /* 0x78 - 0x7F */ struct SGDescriptor SG[IOACCEL1_MAXSGENTRIES]; -} __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT); +} __packed __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT); #define IOACCEL1_FUNCTION_SCSIIO 0x00 #define IOACCEL1_SGLOFFSET 32 @@ -519,7 +520,7 @@ struct ioaccel2_sg_element { u8 chain_indicator; #define IOACCEL2_CHAIN 0x80 #define IOACCEL2_LAST_SG 0x40 -}; +} __packed; /* * SCSI Response Format structure for IO Accelerator Mode 2 @@ -559,7 +560,7 @@ struct io_accel2_scsi_response { u8 sense_data_len; /* sense/response data length */ u8 resid_cnt[4]; /* residual count */ u8 sense_data_buff[32]; /* sense/response data buffer */ -}; +} __packed; /* * Structure for I/O accelerator (mode 2 or m2) commands. @@ -592,7 +593,7 @@ struct io_accel2_cmd { __le32 tweak_upper; /* Encryption tweak, upper 4 bytes */ struct ioaccel2_sg_element sg[IOACCEL2_MAXSGENTRIES]; struct io_accel2_scsi_response error_data; -} __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT); +} __packed __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT); /* * defines for Mode 2 command struct @@ -618,7 +619,7 @@ struct hpsa_tmf_struct { __le64 abort_tag; /* cciss tag of SCSI cmd or TMF to abort */ __le64 error_ptr; /* Error Pointer */ __le32 error_len; /* Error Length */ -} __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT); +} __packed __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT); /* Configuration Table Structure */ struct HostWrite { @@ -626,7 +627,7 @@ struct HostWrite { __le32 command_pool_addr_hi; __le32 CoalIntDelay; __le32 CoalIntCount; -}; +} __packed; #define SIMPLE_MODE 0x02 #define PERFORMANT_MODE 0x04 @@ -675,7 +676,7 @@ struct CfgTable { #define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30) #define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31) __le32 clear_event_notify; -}; +} __packed; #define NUM_BLOCKFETCH_ENTRIES 8 struct TransTable_struct { @@ -686,14 +687,14 @@ struct TransTable_struct { __le32 RepQCtrAddrHigh32; #define MAX_REPLY_QUEUES 64 struct vals32 RepQAddr[MAX_REPLY_QUEUES]; -}; +} __packed; struct hpsa_pci_info { unsigned char bus; unsigned char dev_fn; unsigned short domain; u32 board_id; -}; +} __packed; struct bmic_identify_controller { u8 configured_logical_drive_count; /* offset 0 */ @@ -702,7 +703,7 @@ struct bmic_identify_controller { u8 pad2[136]; u8 controller_mode; /* offset 292 */ u8 pad3[32]; -}; +} __packed; struct bmic_identify_physical_device { @@ -845,7 +846,7 @@ struct bmic_identify_physical_device { u8 max_link_rate[256]; u8 neg_phys_link_rate[256]; u8 box_conn_name[8]; -} __attribute((aligned(512))); +} __packed __attribute((aligned(512))); struct bmic_sense_subsystem_info { u8 primary_slot_number; @@ -858,7 +859,7 @@ struct bmic_sense_subsystem_info { u8 secondary_array_serial_number[32]; u8 secondary_cache_serial_number[32]; u8 pad[332]; -}; +} __packed; struct bmic_sense_storage_box_params { u8 reserved[36]; @@ -870,7 +871,6 @@ struct bmic_sense_storage_box_params { u8 reserver_3[84]; u8 phys_connector[2]; u8 reserved_4[296]; -}; +} __packed; -#pragma pack() #endif /* HPSA_CMD_H */