mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-29 15:14:18 +08:00
[ARM] orion5x: Add LaCie NAS 2Big Network support
This patch add support for the 2Big Network LaCie boards. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
This commit is contained in:
Simon Guinot
Nicolas Pitre
parent
54a246ff21
commit
5478267408
@ -103,6 +103,13 @@ config MACH_BIGDISK
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
LaCie Big Disk Network NAS.
|
||||
|
||||
config MACH_NET2BIG
|
||||
bool "LaCie 2Big Network"
|
||||
select I2C_BOARDINFO
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
LaCie 2Big Network NAS.
|
||||
|
||||
config MACH_MSS2
|
||||
bool "Maxtor Shared Storage II"
|
||||
help
|
||||
|
||||
@ -14,6 +14,7 @@ obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o
|
||||
obj-$(CONFIG_MACH_EDMINI_V2) += edmini_v2-setup.o
|
||||
obj-$(CONFIG_MACH_D2NET) += d2net-setup.o
|
||||
obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o
|
||||
obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o
|
||||
obj-$(CONFIG_MACH_MSS2) += mss2-setup.o
|
||||
obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o
|
||||
obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
|
||||
|
||||
431
arch/arm/mach-orion5x/net2big-setup.c
Normal file
431
arch/arm/mach-orion5x/net2big-setup.c
Normal file
@ -0,0 +1,431 @@
|
||||
/*
|
||||
* arch/arm/mach-orion5x/net2big-setup.c
|
||||
*
|
||||
* LaCie 2Big Network NAS setup
|
||||
*
|
||||
* Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/mv643xx_eth.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/ata_platform.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/delay.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <mach/orion5x.h>
|
||||
#include "common.h"
|
||||
#include "mpp.h"
|
||||
|
||||
/*****************************************************************************
|
||||
* LaCie 2Big Network Info
|
||||
****************************************************************************/
|
||||
|
||||
/*
|
||||
* 512KB NOR flash Device bus boot chip select
|
||||
*/
|
||||
|
||||
#define NET2BIG_NOR_BOOT_BASE 0xfff80000
|
||||
#define NET2BIG_NOR_BOOT_SIZE SZ_512K
|
||||
|
||||
/*****************************************************************************
|
||||
* 512KB NOR Flash on Boot Device
|
||||
****************************************************************************/
|
||||
|
||||
/*
|
||||
* TODO: Check write support on flash MX29LV400CBTC-70G
|
||||
*/
|
||||
|
||||
static struct mtd_partition net2big_partitions[] = {
|
||||
{
|
||||
.name = "Full512kb",
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
.offset = 0x00000000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
},
|
||||
};
|
||||
|
||||
static struct physmap_flash_data net2big_nor_flash_data = {
|
||||
.width = 1,
|
||||
.parts = net2big_partitions,
|
||||
.nr_parts = ARRAY_SIZE(net2big_partitions),
|
||||
};
|
||||
|
||||
static struct resource net2big_nor_flash_resource = {
|
||||
.flags = IORESOURCE_MEM,
|
||||
.start = NET2BIG_NOR_BOOT_BASE,
|
||||
.end = NET2BIG_NOR_BOOT_BASE
|
||||
+ NET2BIG_NOR_BOOT_SIZE - 1,
|
||||
};
|
||||
|
||||
static struct platform_device net2big_nor_flash = {
|
||||
.name = "physmap-flash",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &net2big_nor_flash_data,
|
||||
},
|
||||
.num_resources = 1,
|
||||
.resource = &net2big_nor_flash_resource,
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* Ethernet
|
||||
****************************************************************************/
|
||||
|
||||
static struct mv643xx_eth_platform_data net2big_eth_data = {
|
||||
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* I2C devices
|
||||
****************************************************************************/
|
||||
|
||||
/*
|
||||
* i2c addr | chip | description
|
||||
* 0x32 | Ricoh 5C372b | RTC
|
||||
* 0x50 | HT24LC08 | eeprom (1kB)
|
||||
*/
|
||||
static struct i2c_board_info __initdata net2big_i2c_devices[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("rs5c372b", 0x32),
|
||||
}, {
|
||||
I2C_BOARD_INFO("24c08", 0x50),
|
||||
},
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* SATA
|
||||
****************************************************************************/
|
||||
|
||||
static struct mv_sata_platform_data net2big_sata_data = {
|
||||
.n_ports = 2,
|
||||
};
|
||||
|
||||
#define NET2BIG_GPIO_SATA_POWER_REQ 19
|
||||
#define NET2BIG_GPIO_SATA0_POWER 23
|
||||
#define NET2BIG_GPIO_SATA1_POWER 25
|
||||
|
||||
static void __init net2big_sata_power_init(void)
|
||||
{
|
||||
int err;
|
||||
|
||||
/* Configure GPIOs over MPP max number. */
|
||||
orion_gpio_set_valid(NET2BIG_GPIO_SATA0_POWER, 1);
|
||||
orion_gpio_set_valid(NET2BIG_GPIO_SATA1_POWER, 1);
|
||||
|
||||
err = gpio_request(NET2BIG_GPIO_SATA0_POWER, "SATA0 power status");
|
||||
if (err == 0) {
|
||||
err = gpio_direction_input(NET2BIG_GPIO_SATA0_POWER);
|
||||
if (err)
|
||||
gpio_free(NET2BIG_GPIO_SATA0_POWER);
|
||||
}
|
||||
if (err) {
|
||||
pr_err("net2big: failed to setup SATA0 power GPIO\n");
|
||||
return;
|
||||
}
|
||||
|
||||
err = gpio_request(NET2BIG_GPIO_SATA1_POWER, "SATA1 power status");
|
||||
if (err == 0) {
|
||||
err = gpio_direction_input(NET2BIG_GPIO_SATA1_POWER);
|
||||
if (err)
|
||||
gpio_free(NET2BIG_GPIO_SATA1_POWER);
|
||||
}
|
||||
if (err) {
|
||||
pr_err("net2big: failed to setup SATA1 power GPIO\n");
|
||||
goto err_free_1;
|
||||
}
|
||||
|
||||
err = gpio_request(NET2BIG_GPIO_SATA_POWER_REQ, "SATA power request");
|
||||
if (err == 0) {
|
||||
err = gpio_direction_output(NET2BIG_GPIO_SATA_POWER_REQ, 0);
|
||||
if (err)
|
||||
gpio_free(NET2BIG_GPIO_SATA_POWER_REQ);
|
||||
}
|
||||
if (err) {
|
||||
pr_err("net2big: failed to setup SATA power request GPIO\n");
|
||||
goto err_free_2;
|
||||
}
|
||||
|
||||
if (gpio_get_value(NET2BIG_GPIO_SATA0_POWER) &&
|
||||
gpio_get_value(NET2BIG_GPIO_SATA1_POWER)) {
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* SATA power up on both disk is done by pulling high the CPLD power
|
||||
* request line. The 300ms delay is related to the CPLD clock and is
|
||||
* needed to be sure that the CPLD has take into account the low line
|
||||
* status.
|
||||
*/
|
||||
msleep(300);
|
||||
gpio_set_value(NET2BIG_GPIO_SATA_POWER_REQ, 1);
|
||||
pr_info("net2big: power up SATA hard disks\n");
|
||||
|
||||
return;
|
||||
|
||||
err_free_2:
|
||||
gpio_free(NET2BIG_GPIO_SATA1_POWER);
|
||||
err_free_1:
|
||||
gpio_free(NET2BIG_GPIO_SATA0_POWER);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
/*****************************************************************************
|
||||
* GPIO LEDs
|
||||
****************************************************************************/
|
||||
|
||||
/*
|
||||
* The power front LEDs (blue and red) and SATA red LEDs are controlled via a
|
||||
* single GPIO line and are compatible with the leds-gpio driver.
|
||||
*
|
||||
* The SATA blue LEDs have some hardware blink capabilities which are detailled
|
||||
* in the following array:
|
||||
*
|
||||
* SATAx blue LED | SATAx activity | LED state
|
||||
* | |
|
||||
* 0 | 0 | blink (rate 300ms)
|
||||
* 1 | 0 | off
|
||||
* ? | 1 | on
|
||||
*
|
||||
* Notes: The blue and the red front LED's can't be on at the same time.
|
||||
* Blue LED have priority.
|
||||
*/
|
||||
|
||||
#define NET2BIG_GPIO_PWR_RED_LED 6
|
||||
#define NET2BIG_GPIO_PWR_BLUE_LED 16
|
||||
#define NET2BIG_GPIO_PWR_LED_BLINK_STOP 7
|
||||
|
||||
#define NET2BIG_GPIO_SATA0_RED_LED 11
|
||||
#define NET2BIG_GPIO_SATA1_RED_LED 10
|
||||
|
||||
#define NET2BIG_GPIO_SATA0_BLUE_LED 17
|
||||
#define NET2BIG_GPIO_SATA1_BLUE_LED 13
|
||||
|
||||
static struct gpio_led net2big_leds[] = {
|
||||
{
|
||||
.name = "net2big:red:power",
|
||||
.gpio = NET2BIG_GPIO_PWR_RED_LED,
|
||||
},
|
||||
{
|
||||
.name = "net2big:blue:power",
|
||||
.gpio = NET2BIG_GPIO_PWR_BLUE_LED,
|
||||
},
|
||||
{
|
||||
.name = "net2big:red:sata0",
|
||||
.gpio = NET2BIG_GPIO_SATA0_RED_LED,
|
||||
},
|
||||
{
|
||||
.name = "net2big:red:sata1",
|
||||
.gpio = NET2BIG_GPIO_SATA1_RED_LED,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_led_platform_data net2big_led_data = {
|
||||
.num_leds = ARRAY_SIZE(net2big_leds),
|
||||
.leds = net2big_leds,
|
||||
};
|
||||
|
||||
static struct platform_device net2big_gpio_leds = {
|
||||
.name = "leds-gpio",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &net2big_led_data,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init net2big_gpio_leds_init(void)
|
||||
{
|
||||
int err;
|
||||
|
||||
/* Stop initial CPLD slow red/blue blinking on power LED. */
|
||||
err = gpio_request(NET2BIG_GPIO_PWR_LED_BLINK_STOP,
|
||||
"Power LED blink stop");
|
||||
if (err == 0) {
|
||||
err = gpio_direction_output(NET2BIG_GPIO_PWR_LED_BLINK_STOP, 1);
|
||||
if (err)
|
||||
gpio_free(NET2BIG_GPIO_PWR_LED_BLINK_STOP);
|
||||
}
|
||||
if (err)
|
||||
pr_err("net2big: failed to setup power LED blink GPIO\n");
|
||||
|
||||
/*
|
||||
* Configure SATA0 and SATA1 blue LEDs to blink in relation with the
|
||||
* hard disk activity.
|
||||
*/
|
||||
err = gpio_request(NET2BIG_GPIO_SATA0_BLUE_LED,
|
||||
"SATA0 blue LED control");
|
||||
if (err == 0) {
|
||||
err = gpio_direction_output(NET2BIG_GPIO_SATA0_BLUE_LED, 1);
|
||||
if (err)
|
||||
gpio_free(NET2BIG_GPIO_SATA0_BLUE_LED);
|
||||
}
|
||||
if (err)
|
||||
pr_err("net2big: failed to setup SATA0 blue LED GPIO\n");
|
||||
|
||||
err = gpio_request(NET2BIG_GPIO_SATA1_BLUE_LED,
|
||||
"SATA1 blue LED control");
|
||||
if (err == 0) {
|
||||
err = gpio_direction_output(NET2BIG_GPIO_SATA1_BLUE_LED, 1);
|
||||
if (err)
|
||||
gpio_free(NET2BIG_GPIO_SATA1_BLUE_LED);
|
||||
}
|
||||
if (err)
|
||||
pr_err("net2big: failed to setup SATA1 blue LED GPIO\n");
|
||||
|
||||
platform_device_register(&net2big_gpio_leds);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* GPIO keys
|
||||
****************************************************************************/
|
||||
|
||||
#define NET2BIG_GPIO_PUSH_BUTTON 18
|
||||
#define NET2BIG_GPIO_POWER_SWITCH_ON 8
|
||||
#define NET2BIG_GPIO_POWER_SWITCH_OFF 9
|
||||
|
||||
#define NET2BIG_SWITCH_POWER_ON 0x1
|
||||
#define NET2BIG_SWITCH_POWER_OFF 0x2
|
||||
|
||||
static struct gpio_keys_button net2big_buttons[] = {
|
||||
{
|
||||
.type = EV_SW,
|
||||
.code = NET2BIG_SWITCH_POWER_OFF,
|
||||
.gpio = NET2BIG_GPIO_POWER_SWITCH_OFF,
|
||||
.desc = "Power rocker switch (auto|off)",
|
||||
.active_low = 0,
|
||||
},
|
||||
{
|
||||
.type = EV_SW,
|
||||
.code = NET2BIG_SWITCH_POWER_ON,
|
||||
.gpio = NET2BIG_GPIO_POWER_SWITCH_ON,
|
||||
.desc = "Power rocker switch (on|auto)",
|
||||
.active_low = 0,
|
||||
},
|
||||
{
|
||||
.type = EV_KEY,
|
||||
.code = KEY_POWER,
|
||||
.gpio = NET2BIG_GPIO_PUSH_BUTTON,
|
||||
.desc = "Front Push Button",
|
||||
.active_low = 0,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_platform_data net2big_button_data = {
|
||||
.buttons = net2big_buttons,
|
||||
.nbuttons = ARRAY_SIZE(net2big_buttons),
|
||||
};
|
||||
|
||||
static struct platform_device net2big_gpio_buttons = {
|
||||
.name = "gpio-keys",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &net2big_button_data,
|
||||
},
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* General Setup
|
||||
****************************************************************************/
|
||||
|
||||
static struct orion5x_mpp_mode net2big_mpp_modes[] __initdata = {
|
||||
{ 0, MPP_GPIO }, /* Raid mode (bit 0) */
|
||||
{ 1, MPP_GPIO }, /* USB port 2 fuse (0 = Fail, 1 = Ok) */
|
||||
{ 2, MPP_GPIO }, /* Raid mode (bit 1) */
|
||||
{ 3, MPP_GPIO }, /* Board ID (bit 0) */
|
||||
{ 4, MPP_GPIO }, /* Fan activity (0 = Off, 1 = On) */
|
||||
{ 5, MPP_GPIO }, /* Fan fail detection */
|
||||
{ 6, MPP_GPIO }, /* Red front LED (0 = Off, 1 = On) */
|
||||
{ 7, MPP_GPIO }, /* Disable initial blinking on front LED */
|
||||
{ 8, MPP_GPIO }, /* Rear power switch (on|auto) */
|
||||
{ 9, MPP_GPIO }, /* Rear power switch (auto|off) */
|
||||
{ 10, MPP_GPIO }, /* SATA 1 red LED (0 = Off, 1 = On) */
|
||||
{ 11, MPP_GPIO }, /* SATA 0 red LED (0 = Off, 1 = On) */
|
||||
{ 12, MPP_GPIO }, /* Board ID (bit 1) */
|
||||
{ 13, MPP_GPIO }, /* SATA 1 blue LED blink control */
|
||||
{ 14, MPP_SATA_LED },
|
||||
{ 15, MPP_SATA_LED },
|
||||
{ 16, MPP_GPIO }, /* Blue front LED control */
|
||||
{ 17, MPP_GPIO }, /* SATA 0 blue LED blink control */
|
||||
{ 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */
|
||||
{ 19, MPP_GPIO }, /* SATA{0,1} power On/Off request */
|
||||
{ -1 }
|
||||
/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
|
||||
/* 23: SATA 0 power status */
|
||||
/* 24: Board power off */
|
||||
/* 25: SATA 1 power status */
|
||||
};
|
||||
|
||||
#define NET2BIG_GPIO_POWER_OFF 24
|
||||
|
||||
static void net2big_power_off(void)
|
||||
{
|
||||
gpio_set_value(NET2BIG_GPIO_POWER_OFF, 1);
|
||||
}
|
||||
|
||||
static void __init net2big_init(void)
|
||||
{
|
||||
/*
|
||||
* Setup basic Orion functions. Need to be called early.
|
||||
*/
|
||||
orion5x_init();
|
||||
|
||||
orion5x_mpp_conf(net2big_mpp_modes);
|
||||
|
||||
/*
|
||||
* Configure peripherals.
|
||||
*/
|
||||
orion5x_ehci0_init();
|
||||
orion5x_ehci1_init();
|
||||
orion5x_eth_init(&net2big_eth_data);
|
||||
orion5x_i2c_init();
|
||||
orion5x_uart0_init();
|
||||
orion5x_xor_init();
|
||||
|
||||
net2big_sata_power_init();
|
||||
orion5x_sata_init(&net2big_sata_data);
|
||||
|
||||
orion5x_setup_dev_boot_win(NET2BIG_NOR_BOOT_BASE,
|
||||
NET2BIG_NOR_BOOT_SIZE);
|
||||
platform_device_register(&net2big_nor_flash);
|
||||
|
||||
platform_device_register(&net2big_gpio_buttons);
|
||||
net2big_gpio_leds_init();
|
||||
|
||||
i2c_register_board_info(0, net2big_i2c_devices,
|
||||
ARRAY_SIZE(net2big_i2c_devices));
|
||||
|
||||
orion_gpio_set_valid(NET2BIG_GPIO_POWER_OFF, 1);
|
||||
|
||||
if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
|
||||
gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
|
||||
pm_power_off = net2big_power_off;
|
||||
else
|
||||
pr_err("net2big: failed to configure power-off GPIO\n");
|
||||
|
||||
pr_notice("net2big: Flash writing is not yet supported.\n");
|
||||
}
|
||||
|
||||
/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
|
||||
MACHINE_START(NET2BIG, "LaCie 2Big Network")
|
||||
.phys_io = ORION5X_REGS_PHYS_BASE,
|
||||
.io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
|
||||
.boot_params = 0x00000100,
|
||||
.init_machine = net2big_init,
|
||||
.map_io = orion5x_map_io,
|
||||
.init_irq = orion5x_init_irq,
|
||||
.timer = &orion5x_timer,
|
||||
.fixup = tag_fixup_mem32,
|
||||
MACHINE_END
|
||||
|
||||
Loading…
Reference in New Issue
Block a user