i2c: i2c-mpc: use dev based printout function

This patch used the dev_dbg, dev_err, etc. functions for debug
and error output instead of printk and pr_debug.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This commit is contained in:
Wolfgang Grandegger 2009-04-07 10:20:54 +02:00 committed by Ben Dooks
parent 8101a30095
commit 54377cd059

View File

@ -50,6 +50,7 @@
#define CSR_RXAK 0x01
struct mpc_i2c {
struct device *dev;
void __iomem *base;
u32 interrupt;
wait_queue_head_t queue;
@ -104,7 +105,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
schedule();
if (time_after(jiffies, orig_jiffies + timeout)) {
pr_debug("I2C: timeout\n");
dev_dbg(i2c->dev, "timeout\n");
writeccr(i2c, 0);
result = -EIO;
break;
@ -118,7 +119,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
(i2c->interrupt & CSR_MIF), timeout);
if (unlikely(!(i2c->interrupt & CSR_MIF))) {
pr_debug("I2C: wait timeout\n");
dev_dbg(i2c->dev, "wait timeout\n");
writeccr(i2c, 0);
result = -ETIMEDOUT;
}
@ -131,17 +132,17 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
return result;
if (!(x & CSR_MCF)) {
pr_debug("I2C: unfinished\n");
dev_dbg(i2c->dev, "unfinished\n");
return -EIO;
}
if (x & CSR_MAL) {
pr_debug("I2C: MAL\n");
dev_dbg(i2c->dev, "MAL\n");
return -EIO;
}
if (writing && (x & CSR_RXAK)) {
pr_debug("I2C: No RXAK\n");
dev_dbg(i2c->dev, "No RXAK\n");
/* generate stop */
writeccr(i2c, CCR_MEN);
return -EIO;
@ -263,12 +264,12 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
/* Allow bus up to 1s to become not busy */
while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
if (signal_pending(current)) {
pr_debug("I2C: Interrupted\n");
dev_dbg(i2c->dev, "Interrupted\n");
writeccr(i2c, 0);
return -EINTR;
}
if (time_after(jiffies, orig_jiffies + HZ)) {
pr_debug("I2C: timeout\n");
dev_dbg(i2c->dev, "timeout\n");
if (readb(i2c->base + MPC_I2C_SR) ==
(CSR_MCF | CSR_MBB | CSR_RXAK))
mpc_i2c_fixup(i2c);
@ -279,7 +280,8 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
for (i = 0; ret >= 0 && i < num; i++) {
pmsg = &msgs[i];
pr_debug("Doing %s %d bytes to 0x%02x - %d of %d messages\n",
dev_dbg(i2c->dev,
"Doing %s %d bytes to 0x%02x - %d of %d messages\n",
pmsg->flags & I2C_M_RD ? "read" : "write",
pmsg->len, pmsg->addr, i + 1, num);
if (pmsg->flags & I2C_M_RD)
@ -320,6 +322,8 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
if (!i2c)
return -ENOMEM;
i2c->dev = &op->dev; /* for debug and error output */
if (of_get_property(op->node, "dfsrr", NULL))
i2c->flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
@ -331,7 +335,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
i2c->base = of_iomap(op->node, 0);
if (!i2c->base) {
printk(KERN_ERR "i2c-mpc - failed to map controller\n");
dev_err(i2c->dev, "failed to map controller\n");
result = -ENOMEM;
goto fail_map;
}
@ -341,8 +345,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
result = request_irq(i2c->irq, mpc_i2c_isr,
IRQF_SHARED, "i2c-mpc", i2c);
if (result < 0) {
printk(KERN_ERR
"i2c-mpc - failed to attach interrupt\n");
dev_err(i2c->dev, "failed to attach interrupt\n");
goto fail_request;
}
}
@ -357,7 +360,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
result = i2c_add_adapter(&i2c->adap);
if (result < 0) {
printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
dev_err(i2c->dev, "failed to add adapter\n");
goto fail_add;
}
of_register_i2c_devices(&i2c->adap, op->node);