diff --git a/MAINTAINERS b/MAINTAINERS index faa9c34d837d..43007f2d29e0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16502,6 +16502,12 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml F: drivers/media/platform/sunxi/sun8i-rotate/ +RPMSG TTY DRIVER +M: Arnaud Pouliquen +L: linux-remoteproc@vger.kernel.org +S: Maintained +F: drivers/tty/rpmsg_tty.c + RTL2830 MEDIA DRIVER M: Antti Palosaari L: linux-media@vger.kernel.org diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c index 7f656fac503f..5163d60756b7 100644 --- a/drivers/tty/serial/8250/8250_bcm7271.c +++ b/drivers/tty/serial/8250/8250_bcm7271.c @@ -237,6 +237,7 @@ struct brcmuart_priv { u32 rx_err; u32 rx_timeout; u32 rx_abort; + u32 saved_mctrl; }; static struct dentry *brcmuart_debugfs_root; @@ -1133,16 +1134,27 @@ static int brcmuart_remove(struct platform_device *pdev) static int __maybe_unused brcmuart_suspend(struct device *dev) { struct brcmuart_priv *priv = dev_get_drvdata(dev); + struct uart_8250_port *up = serial8250_get_port(priv->line); + struct uart_port *port = &up->port; serial8250_suspend_port(priv->line); clk_disable_unprepare(priv->baud_mux_clk); + /* + * This will prevent resume from enabling RTS before the + * baud rate has been resored. + */ + priv->saved_mctrl = port->mctrl; + port->mctrl = 0; + return 0; } static int __maybe_unused brcmuart_resume(struct device *dev) { struct brcmuart_priv *priv = dev_get_drvdata(dev); + struct uart_8250_port *up = serial8250_get_port(priv->line); + struct uart_port *port = &up->port; int ret; ret = clk_prepare_enable(priv->baud_mux_clk); @@ -1165,6 +1177,7 @@ static int __maybe_unused brcmuart_resume(struct device *dev) start_rx_dma(serial8250_get_port(priv->line)); } serial8250_resume_port(priv->line); + port->mctrl = priv->saved_mctrl; return 0; } diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 5d43de143f33..60f8fffdfd77 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1324,29 +1324,33 @@ pericom_do_set_divisor(struct uart_port *port, unsigned int baud, { int scr; int lcr; - int actual_baud; - int tolerance; - for (scr = 5 ; scr <= 15 ; scr++) { - actual_baud = 921600 * 16 / scr; - tolerance = actual_baud / 50; + for (scr = 16; scr > 4; scr--) { + unsigned int maxrate = port->uartclk / scr; + unsigned int divisor = max(maxrate / baud, 1U); + int delta = maxrate / divisor - baud; - if ((baud < actual_baud + tolerance) && - (baud > actual_baud - tolerance)) { + if (baud > maxrate + baud / 50) + continue; + if (delta > baud / 50) + divisor++; + + if (divisor > 0xffff) + continue; + + /* Update delta due to possible divisor change */ + delta = maxrate / divisor - baud; + if (abs(delta) < baud / 50) { lcr = serial_port_in(port, UART_LCR); serial_port_out(port, UART_LCR, lcr | 0x80); - - serial_port_out(port, UART_DLL, 1); - serial_port_out(port, UART_DLM, 0); + serial_port_out(port, UART_DLL, divisor & 0xff); + serial_port_out(port, UART_DLM, divisor >> 8 & 0xff); serial_port_out(port, 2, 16 - scr); serial_port_out(port, UART_LCR, lcr); return; - } else if (baud > actual_baud) { - break; } } - serial8250_do_set_divisor(port, baud, quot, quot_frac); } static int pci_pericom_setup(struct serial_private *priv, const struct pciserial_board *board, @@ -2291,12 +2295,19 @@ static struct pci_serial_quirk pci_serial_quirks[] = { .setup = pci_pericom_setup_four_at_eight, }, { - .vendor = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S, + .vendor = PCI_VENDOR_ID_ACCESIO, .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .setup = pci_pericom_setup_four_at_eight, }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, { .vendor = PCI_VENDOR_ID_ACCESIO, .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4, diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 5775cbff8f6e..46e2079ad1aa 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2024,13 +2024,6 @@ void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl) struct uart_8250_port *up = up_to_u8250p(port); unsigned char mcr; - if (port->rs485.flags & SER_RS485_ENABLED) { - if (serial8250_in_MCR(up) & UART_MCR_RTS) - mctrl |= TIOCM_RTS; - else - mctrl &= ~TIOCM_RTS; - } - mcr = serial8250_TIOCM_to_MCR(mctrl); mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr; diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 6ff94cfcd9db..fc543ac97c13 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1533,7 +1533,7 @@ config SERIAL_LITEUART tristate "LiteUART serial port support" depends on HAS_IOMEM depends on OF || COMPILE_TEST - depends on LITEX + depends on LITEX || COMPILE_TEST select SERIAL_CORE help This driver is for the FPGA-based LiteUART serial controller from LiteX diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index d361cd84ff8c..52518a606c06 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2947,6 +2947,7 @@ MODULE_DEVICE_TABLE(of, sbsa_uart_of_match); static const struct acpi_device_id __maybe_unused sbsa_uart_acpi_match[] = { { "ARMH0011", 0 }, + { "ARMHB000", 0 }, {}, }; MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match); diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index b1e7190ae483..ac5112def40d 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -2625,6 +2625,7 @@ OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup); OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup); OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1028a-lpuart", ls1028a_early_console_setup); OF_EARLYCON_DECLARE(lpuart32, "fsl,imx7ulp-lpuart", lpuart32_imx_early_console_setup); +OF_EARLYCON_DECLARE(lpuart32, "fsl,imx8qxp-lpuart", lpuart32_imx_early_console_setup); EARLYCON_DECLARE(lpuart, lpuart_early_console_setup); EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup); diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c index dbc0559a9157..2941659e5274 100644 --- a/drivers/tty/serial/liteuart.c +++ b/drivers/tty/serial/liteuart.c @@ -270,8 +270,10 @@ static int liteuart_probe(struct platform_device *pdev) /* get membase */ port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); - if (IS_ERR(port->membase)) - return PTR_ERR(port->membase); + if (IS_ERR(port->membase)) { + ret = PTR_ERR(port->membase); + goto err_erase_id; + } /* values not from device tree */ port->dev = &pdev->dev; @@ -285,7 +287,18 @@ static int liteuart_probe(struct platform_device *pdev) port->line = dev_id; spin_lock_init(&port->lock); - return uart_add_one_port(&liteuart_driver, &uart->port); + platform_set_drvdata(pdev, port); + + ret = uart_add_one_port(&liteuart_driver, &uart->port); + if (ret) + goto err_erase_id; + + return 0; + +err_erase_id: + xa_erase(&liteuart_array, uart->id); + + return ret; } static int liteuart_remove(struct platform_device *pdev) @@ -293,6 +306,7 @@ static int liteuart_remove(struct platform_device *pdev) struct uart_port *port = platform_get_drvdata(pdev); struct liteuart_port *uart = to_liteuart_port(port); + uart_remove_one_port(&liteuart_driver, port); xa_erase(&liteuart_array, uart->id); return 0; diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index fcef7a961430..489d19274f9a 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -598,6 +598,9 @@ static void msm_start_rx_dma(struct msm_port *msm_port) u32 val; int ret; + if (IS_ENABLED(CONFIG_CONSOLE_POLL)) + return; + if (!dma->chan) return; diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index 45e2e4109acd..b6223fab0687 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -1506,7 +1506,7 @@ static struct tegra_uart_chip_data tegra20_uart_chip_data = { .fifo_mode_enable_status = false, .uart_max_port = 5, .max_dma_burst_bytes = 4, - .error_tolerance_low_range = 0, + .error_tolerance_low_range = -4, .error_tolerance_high_range = 4, }; @@ -1517,7 +1517,7 @@ static struct tegra_uart_chip_data tegra30_uart_chip_data = { .fifo_mode_enable_status = false, .uart_max_port = 5, .max_dma_burst_bytes = 4, - .error_tolerance_low_range = 0, + .error_tolerance_low_range = -4, .error_tolerance_high_range = 4, }; diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 1e738f265eea..61e3dd0222af 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1075,6 +1075,11 @@ uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) goto out; if (!tty_io_error(tty)) { + if (uport->rs485.flags & SER_RS485_ENABLED) { + set &= ~TIOCM_RTS; + clear &= ~TIOCM_RTS; + } + uart_update_mctrl(uport, set, clear); ret = 0; } @@ -1549,6 +1554,7 @@ static void uart_tty_port_shutdown(struct tty_port *port) { struct uart_state *state = container_of(port, struct uart_state, port); struct uart_port *uport = uart_port_check(state); + char *buf; /* * At this point, we stop accepting input. To do this, we @@ -1570,8 +1576,18 @@ static void uart_tty_port_shutdown(struct tty_port *port) */ tty_port_set_suspended(port, 0); - uart_change_pm(state, UART_PM_STATE_OFF); + /* + * Free the transmit buffer. + */ + spin_lock_irq(&uport->lock); + buf = state->xmit.buf; + state->xmit.buf = NULL; + spin_unlock_irq(&uport->lock); + if (buf) + free_page((unsigned long)buf); + + uart_change_pm(state, UART_PM_STATE_OFF); } static void uart_wait_until_sent(struct tty_struct *tty, int timeout) diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index ef9c57ce0906..9a49ea6b5112 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -366,11 +366,17 @@ static void vgacon_init(struct vc_data *c, int init) struct uni_pagedir *p; /* - * We cannot be loaded as a module, therefore init is always 1, - * but vgacon_init can be called more than once, and init will - * not be 1. + * We cannot be loaded as a module, therefore init will be 1 + * if we are the default console, however if we are a fallback + * console, for example if fbcon has failed registration, then + * init will be 0, so we need to make sure our boot parameters + * have been copied to the console structure for vgacon_resize + * ultimately called by vc_resize. Any subsequent calls to + * vgacon_init init will have init set to 0 too. */ c->vc_can_do_color = vga_can_do_color; + c->vc_scan_lines = vga_scan_lines; + c->vc_font.height = c->vc_cell_height = vga_video_font_height; /* set dimensions manually if init != 0 since vc_resize() will fail */ if (init) { @@ -379,8 +385,6 @@ static void vgacon_init(struct vc_data *c, int init) } else vc_resize(c, vga_video_num_columns, vga_video_num_lines); - c->vc_scan_lines = vga_scan_lines; - c->vc_font.height = c->vc_cell_height = vga_video_font_height; c->vc_complement_mask = 0x7700; if (vga_512_chars) c->vc_hi_font_mask = 0x0800;