watchdog: bd9576_wdt: switch to using devm_fwnode_gpiod_get()

I would like to stop exporting OF-specific devm_gpiod_get_from_of_node()
so that gpiolib can be cleaned a bit, so let's switch to the generic
fwnode property API.

While at it, switch the rest of the calls to read properties in
bd9576_wdt_probe() to the generic device property API as well.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220903-gpiod_get_from_of_node-remove-v1-10-b29adfb27a6c@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This commit is contained in:
Dmitry Torokhov 2022-09-04 23:31:02 -07:00 committed by Wim Van Sebroeck
parent 434e5f93ed
commit 4f719022a7

View File

@ -9,8 +9,8 @@
#include <linux/gpio/consumer.h>
#include <linux/mfd/rohm-bd957x.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/watchdog.h>
@ -202,10 +202,10 @@ static int bd957x_set_wdt_mode(struct bd9576_wdt_priv *priv, int hw_margin,
static int bd9576_wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->parent->of_node;
struct bd9576_wdt_priv *priv;
u32 hw_margin[2];
u32 hw_margin_max = BD957X_WDT_DEFAULT_MARGIN, hw_margin_min = 0;
int count;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@ -221,40 +221,51 @@ static int bd9576_wdt_probe(struct platform_device *pdev)
return -ENODEV;
}
priv->gpiod_en = devm_gpiod_get_from_of_node(dev, dev->parent->of_node,
"rohm,watchdog-enable-gpios",
0, GPIOD_OUT_LOW,
"watchdog-enable");
priv->gpiod_en = devm_fwnode_gpiod_get(dev, dev_fwnode(dev->parent),
"rohm,watchdog-enable",
GPIOD_OUT_LOW,
"watchdog-enable");
if (IS_ERR(priv->gpiod_en))
return dev_err_probe(dev, PTR_ERR(priv->gpiod_en),
"getting watchdog-enable GPIO failed\n");
priv->gpiod_ping = devm_gpiod_get_from_of_node(dev, dev->parent->of_node,
"rohm,watchdog-ping-gpios",
0, GPIOD_OUT_LOW,
"watchdog-ping");
priv->gpiod_ping = devm_fwnode_gpiod_get(dev, dev_fwnode(dev->parent),
"rohm,watchdog-ping",
GPIOD_OUT_LOW,
"watchdog-ping");
if (IS_ERR(priv->gpiod_ping))
return dev_err_probe(dev, PTR_ERR(priv->gpiod_ping),
"getting watchdog-ping GPIO failed\n");
ret = of_property_read_variable_u32_array(np, "rohm,hw-timeout-ms",
&hw_margin[0], 1, 2);
if (ret < 0 && ret != -EINVAL)
return ret;
count = device_property_count_u32(dev->parent, "rohm,hw-timeout-ms");
if (count < 0 && count != -EINVAL)
return count;
if (ret == 1)
hw_margin_max = hw_margin[0];
if (count > 0) {
if (count > ARRAY_SIZE(hw_margin))
return -EINVAL;
if (ret == 2) {
hw_margin_max = hw_margin[1];
hw_margin_min = hw_margin[0];
ret = device_property_read_u32_array(dev->parent,
"rohm,hw-timeout-ms",
hw_margin, count);
if (ret < 0)
return ret;
if (count == 1)
hw_margin_max = hw_margin[0];
if (count == 2) {
hw_margin_max = hw_margin[1];
hw_margin_min = hw_margin[0];
}
}
ret = bd957x_set_wdt_mode(priv, hw_margin_max, hw_margin_min);
if (ret)
return ret;
priv->always_running = of_property_read_bool(np, "always-running");
priv->always_running = device_property_read_bool(dev->parent,
"always-running");
watchdog_set_drvdata(&priv->wdd, priv);