dt-bindings: Fix properties without any type

Now that the schema tools can extract type information for all
properties (in order to decode dtb files), finding properties missing
any type definition is fairly trivial though not yet automated.

Fix the various property schemas which are missing a type. Most of these
tend to be device specific properties which don't have a vendor prefix.
A vendor prefix is how we normally ensure a type is defined.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org> # for everything in .../bindings/display/
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20220519211411.2200720-1-robh@kernel.org

Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml

@@ -17,14 +17,15 @@ properties:
       - const: hisilicon,hip04-bootwrapper
 
   boot-method:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
       Address and size of boot method.
       [0]: bootwrapper physical address
       [1]: bootwrapper size
       [2]: relocation physical address
       [3]: relocation size
-    minItems: 1
-    maxItems: 2
+    minItems: 2
+    maxItems: 4
 
 required:
   - compatible

Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml

@@ -58,6 +58,7 @@ properties:
 
             properties:
               data-lines:
+                $ref: /schemas/types.yaml#/definitions/uint32
                 enum: [ 16, 18, 24 ]
 
       port@1:

Documentation/devicetree/bindings/display/panel/panel-timing.yaml

@@ -146,6 +146,7 @@ properties:
       Horizontal sync pulse.
       0 selects active low, 1 selects active high.
       If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   vsync-active:
@@ -153,6 +154,7 @@ properties:
       Vertical sync pulse.
       0 selects active low, 1 selects active high.
       If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   de-active:
@@ -160,6 +162,7 @@ properties:
       Data enable.
       0 selects active low, 1 selects active high.
       If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   pixelclk-active:
@@ -169,6 +172,7 @@ properties:
       sample data on rising edge.
       Use 1 to drive pixel data on rising edge and
       sample data on falling edge
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   syncclk-active:
@@ -179,6 +183,7 @@ properties:
       sample sync on rising edge of pixel clock.
       Use 1 to drive sync on rising edge and
       sample sync on falling edge of pixel clock
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   interlaced:

Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml

@@ -24,6 +24,7 @@ properties:
 
   dsi-lanes:
     description: Number of DSI lanes to be used must be <3> or <4>
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [3, 4]
 
   v3p3-supply:

Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml

@@ -36,6 +36,7 @@ properties:
 
   init-delay:
     description: delay after initialization sequence [ms]
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   panel-width-mm:
     description: physical panel width [mm]

Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml

@@ -26,6 +26,7 @@ properties:
     const: 2
 
   registers-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: Number of daisy-chained shift registers
 
   enable-gpios:

Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml

@@ -31,6 +31,7 @@ properties:
     type: boolean
 
   function-row-physmap:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     maxItems: 15
     description: |

Documentation/devicetree/bindings/media/i2c/adv7604.yaml

@@ -60,7 +60,8 @@ properties:
       enables hot-plug detection.
 
   default-input:
-    maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
     description:
       Select which input is selected after reset.
 

Documentation/devicetree/bindings/mux/reg-mux.yaml

@@ -25,8 +25,12 @@ properties:
     const: 1
 
   mux-reg-masks:
-    description: an array of register offset and pre-shifted bitfield mask
-      pairs, each describing a single mux control.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: register offset
+        - description: pre-shifted bitfield mask
+    description: Each entry pair describes a single mux control.
 
   idle-states: true
 

Documentation/devicetree/bindings/net/cdns,macb.yaml

@@ -129,6 +129,7 @@ patternProperties:
       reset-gpios: true
 
       magic-packet:
+        type: boolean
         description:
           Indicates that the hardware supports waking up via magic packet.
 

Documentation/devicetree/bindings/net/ingenic,mac.yaml

@@ -37,6 +37,7 @@ properties:
     const: stmmaceth
 
   mode-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: An extra syscon register that control ethernet interface and timing delay
 
   rx-clk-delay-ps:

Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml

@@ -34,6 +34,7 @@ properties:
     maxItems: 1
 
   bus_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
     maximum: 2500000
     description: MDIO Bus frequency
 

Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml

@@ -54,9 +54,11 @@ properties:
 
 
   ref-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: Reference clock frequency.
 
   tcxo-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: TCXO clock frequency.
 
   clock-xtal:

Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml

@@ -55,13 +55,15 @@ properties:
       Translation Unit) registers.
 
   num-ib-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 256
     description: number of inbound address translation windows
-    maxItems: 1
     deprecated: true
 
   num-ob-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 256
     description: number of outbound address translation windows
-    maxItems: 1
     deprecated: true
 
 required:

Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml

@@ -68,6 +68,8 @@ properties:
       Translation Unit) registers.
 
   num-viewport:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 256
     description: |
       number of view ports configured in hardware. If a platform
       does not specify it, the driver autodetects it.

Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml

@@ -120,6 +120,7 @@ patternProperties:
       input-schmitt-disable: true
 
       input-polarity-invert:
+        type: boolean
         description:
           Enable or disable pin input polarity inversion.
 
@@ -132,6 +133,7 @@ patternProperties:
       output-low: true
 
       output-polarity-invert:
+        type: boolean
         description:
           Enable or disable pin output polarity inversion.
 

Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml

@@ -51,6 +51,7 @@ properties:
       supported by the CPR power domain.
 
   acc-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: A phandle to the syscon used for writing ACC settings.
 
   nvmem-cells:

Documentation/devicetree/bindings/power/supply/battery.yaml

@@ -85,8 +85,13 @@ properties:
     description: battery factory internal resistance
 
   resistance-temp-table:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: the temperature in degree Celsius
+        - description: battery internal resistance percent
     description: |
-      An array providing the temperature in degree Celsius
+      A table providing the temperature in degree Celsius
       and corresponding battery internal resistance percent, which is used to
       look up the resistance percent according to current temperature to get an
       accurate batterty internal resistance in different temperatures.

Documentation/devicetree/bindings/power/supply/charger-manager.yaml

@@ -36,6 +36,7 @@ properties:
 
   cm-poll-mode:
     description: polling mode
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 0
     enum:
       - 0 # disabled

Documentation/devicetree/bindings/rng/st,stm32-rng.yaml

@@ -27,6 +27,7 @@ properties:
     maxItems: 1
 
   clock-error-detect:
+    type: boolean
     description: If set enable the clock detection management
 
 required:

Documentation/devicetree/bindings/serial/8250.yaml

@@ -138,6 +138,7 @@ properties:
     description: The current active speed of the UART.
 
   reg-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       Offset to apply to the mapbase from the start of the registers.
 

Documentation/devicetree/bindings/sound/audio-graph-card2.yaml

@@ -24,10 +24,13 @@ properties:
       connection's sink, the second being the connection's source.
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
   multi:
+    type: object
     description: Multi-CPU/Codec node
   dpcm:
+    type: object
     description: DPCM node
   codec2codec:
+    type: object
     description: Codec to Codec node
 
 required:

Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml

@@ -20,9 +20,11 @@ properties:
     description: User specified audio sound card name
 
   audio-cpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: The phandle of an CPU DAI controller
 
   hdmi-out:
+    type: boolean
     description: |
       This is a boolean property. If present, the transmitting function
       of HDMI will be enabled, indicating there's a physical HDMI out
@@ -30,6 +32,7 @@ properties:
       block, such as an HDMI encoder or display-controller.
 
   hdmi-in:
+    type: boolean
     description: |
       This is a boolean property. If present, the receiving function of
       HDMI will be enabled, indicating there is a physical HDMI in

Documentation/devicetree/bindings/usb/smsc,usb3503.yaml

@@ -45,6 +45,7 @@ properties:
       property if all ports have to be enabled.
 
   initial-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 2]
     description: >
       Specifies initial mode. 1 for Hub mode, 2 for standby mode.