gpio: stmpe: use BIT() macro

Avoid custom (1 << bits) shifting by consequently using the
BIT() macro from <linux/bitops.h>.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Linus Walleij 2016-09-27 16:11:10 -07:00
parent 96b2cca64f
commit 4e2678b540

View File

@ -43,7 +43,7 @@ static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset)
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)];
u8 mask = 1 << (offset % 8);
u8 mask = BIT(offset % 8);
int ret;
ret = stmpe_reg_read(stmpe, reg);
@ -59,7 +59,7 @@ static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
struct stmpe *stmpe = stmpe_gpio->stmpe;
int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB;
u8 reg = stmpe->regs[which + (offset / 8)];
u8 mask = 1 << (offset % 8);
u8 mask = BIT(offset % 8);
/*
* Some variants have single register for gpio set/clear functionality.
@ -77,7 +77,7 @@ static int stmpe_gpio_get_direction(struct gpio_chip *chip,
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8);
u8 mask = 1 << (offset % 8);
u8 mask = BIT(offset % 8);
int ret;
ret = stmpe_reg_read(stmpe, reg);
@ -93,7 +93,7 @@ static int stmpe_gpio_direction_output(struct gpio_chip *chip,
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
u8 mask = 1 << (offset % 8);
u8 mask = BIT(offset % 8);
stmpe_gpio_set(chip, offset, val);
@ -106,7 +106,7 @@ static int stmpe_gpio_direction_input(struct gpio_chip *chip,
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
u8 mask = 1 << (offset % 8);
u8 mask = BIT(offset % 8);
return stmpe_set_bits(stmpe, reg, mask, 0);
}
@ -116,10 +116,10 @@ static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset)
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
if (stmpe_gpio->norequest_mask & (1 << offset))
if (stmpe_gpio->norequest_mask & BIT(offset))
return -EINVAL;
return stmpe_set_altfunc(stmpe, 1 << offset, STMPE_BLOCK_GPIO);
return stmpe_set_altfunc(stmpe, BIT(offset), STMPE_BLOCK_GPIO);
}
static const struct gpio_chip template_chip = {
@ -140,7 +140,7 @@ static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type)
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
int offset = d->hwirq;
int regoffset = offset / 8;
int mask = 1 << (offset % 8);
int mask = BIT(offset % 8);
if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH)
return -EINVAL;
@ -218,7 +218,7 @@ static void stmpe_gpio_irq_mask(struct irq_data *d)
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
int offset = d->hwirq;
int regoffset = offset / 8;
int mask = 1 << (offset % 8);
int mask = BIT(offset % 8);
stmpe_gpio->regs[REG_IE][regoffset] &= ~mask;
}
@ -230,7 +230,7 @@ static void stmpe_gpio_irq_unmask(struct irq_data *d)
struct stmpe *stmpe = stmpe_gpio->stmpe;
int offset = d->hwirq;
int regoffset = offset / 8;
int mask = 1 << (offset % 8);
int mask = BIT(offset % 8);
stmpe_gpio->regs[REG_IE][regoffset] |= mask;
@ -254,7 +254,7 @@ static void stmpe_dbg_show_one(struct seq_file *s,
bool val = !!stmpe_gpio_get(gc, offset);
u8 bank = offset / 8;
u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank];
u8 mask = 1 << (offset % 8);
u8 mask = BIT(offset % 8);
int ret;
u8 dir;
@ -401,7 +401,7 @@ static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
line);
handle_nested_irq(child_irq);
stat &= ~(1 << bit);
stat &= ~BIT(bit);
}
/*