mach-ux500: add hrefv60 GPIO pins

This will centralize all GPIO pin muxing for the different boards
in the MOP500 family to a single file. It also kills off the
deprecated support for the ED (Early Drop) ASIC, this should
never be spotted in the open and ST-Ericsson have internally
deprecated this hardware.

Signed-off-by: Bibek Basu <bibek.basu@stericsson.com>
[Rebasing and kill old ASIC support]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Bibek Basu 2011-02-15 10:46:59 +01:00 committed by Linus Walleij
parent fe05203b0c
commit 4bc3a698c3
2 changed files with 197 additions and 87 deletions

View File

@ -8,19 +8,13 @@
#include <linux/init.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <plat/pincfg.h>
#include <mach/hardware.h>
#include "pins-db8500.h"
static pin_cfg_t mop500_pins[] = {
/* SSP0 */
GPIO143_SSP0_CLK,
GPIO144_SSP0_FRM,
GPIO145_SSP0_RXD,
GPIO146_SSP0_TXD,
static pin_cfg_t mop500_pins_common[] = {
/* I2C */
GPIO147_I2C0_SCL,
GPIO148_I2C0_SDA,
@ -31,6 +25,72 @@ static pin_cfg_t mop500_pins[] = {
GPIO229_I2C3_SDA,
GPIO230_I2C3_SCL,
/* MSP0 */
GPIO12_MSP0_TXD,
GPIO13_MSP0_TFS,
GPIO14_MSP0_TCK,
GPIO15_MSP0_RXD,
/* MSP2: HDMI */
GPIO193_MSP2_TXD,
GPIO194_MSP2_TCK,
GPIO195_MSP2_TFS,
GPIO196_MSP2_RXD | PIN_OUTPUT_LOW,
/* Touch screen INTERFACE */
GPIO84_GPIO | PIN_INPUT_PULLUP, /* TOUCH_INT1 */
/* STMPE1601/tc35893 keypad IRQ */
GPIO218_GPIO | PIN_INPUT_PULLUP,
/* MMC0 (MicroSD card) */
GPIO18_MC0_CMDDIR | PIN_OUTPUT_HIGH,
GPIO19_MC0_DAT0DIR | PIN_OUTPUT_HIGH,
GPIO20_MC0_DAT2DIR | PIN_OUTPUT_HIGH,
GPIO22_MC0_FBCLK | PIN_INPUT_NOPULL,
GPIO23_MC0_CLK | PIN_OUTPUT_LOW,
GPIO24_MC0_CMD | PIN_INPUT_PULLUP,
GPIO25_MC0_DAT0 | PIN_INPUT_PULLUP,
GPIO26_MC0_DAT1 | PIN_INPUT_PULLUP,
GPIO27_MC0_DAT2 | PIN_INPUT_PULLUP,
GPIO28_MC0_DAT3 | PIN_INPUT_PULLUP,
/* SDI1 (SDIO) */
GPIO208_MC1_CLK | PIN_OUTPUT_LOW,
GPIO209_MC1_FBCLK | PIN_INPUT_NOPULL,
GPIO210_MC1_CMD | PIN_INPUT_PULLUP,
GPIO211_MC1_DAT0 | PIN_INPUT_PULLUP,
GPIO212_MC1_DAT1 | PIN_INPUT_PULLUP,
GPIO213_MC1_DAT2 | PIN_INPUT_PULLUP,
GPIO214_MC1_DAT3 | PIN_INPUT_PULLUP,
/* MMC2 (On-board DATA INTERFACE eMMC) */
GPIO128_MC2_CLK | PIN_OUTPUT_LOW,
GPIO129_MC2_CMD | PIN_INPUT_PULLUP,
GPIO130_MC2_FBCLK | PIN_INPUT_NOPULL,
GPIO131_MC2_DAT0 | PIN_INPUT_PULLUP,
GPIO132_MC2_DAT1 | PIN_INPUT_PULLUP,
GPIO133_MC2_DAT2 | PIN_INPUT_PULLUP,
GPIO134_MC2_DAT3 | PIN_INPUT_PULLUP,
GPIO135_MC2_DAT4 | PIN_INPUT_PULLUP,
GPIO136_MC2_DAT5 | PIN_INPUT_PULLUP,
GPIO137_MC2_DAT6 | PIN_INPUT_PULLUP,
GPIO138_MC2_DAT7 | PIN_INPUT_PULLUP,
/* MMC4 (On-board STORAGE INTERFACE eMMC) */
GPIO197_MC4_DAT3 | PIN_INPUT_PULLUP,
GPIO198_MC4_DAT2 | PIN_INPUT_PULLUP,
GPIO199_MC4_DAT1 | PIN_INPUT_PULLUP,
GPIO200_MC4_DAT0 | PIN_INPUT_PULLUP,
GPIO201_MC4_CMD | PIN_INPUT_PULLUP,
GPIO202_MC4_FBCLK | PIN_INPUT_NOPULL,
GPIO203_MC4_CLK | PIN_OUTPUT_LOW,
GPIO204_MC4_DAT7 | PIN_INPUT_PULLUP,
GPIO205_MC4_DAT6 | PIN_INPUT_PULLUP,
GPIO206_MC4_DAT5 | PIN_INPUT_PULLUP,
GPIO207_MC4_DAT4 | PIN_INPUT_PULLUP,
/* SKE keypad */
GPIO153_KP_I7,
GPIO154_KP_I6,
@ -49,32 +109,133 @@ static pin_cfg_t mop500_pins[] = {
GPIO167_KP_O1,
GPIO168_KP_O0,
/* GPIO_EXP_INT */
GPIO217_GPIO,
/* UART */
GPIO0_U0_CTSn | PIN_INPUT_PULLUP,
GPIO1_U0_RTSn | PIN_OUTPUT_HIGH,
GPIO2_U0_RXD | PIN_INPUT_PULLUP,
GPIO3_U0_TXD | PIN_OUTPUT_HIGH,
/* STMPE1601 IRQ */
GPIO218_GPIO | PIN_INPUT_PULLUP,
GPIO29_U2_RXD | PIN_INPUT_PULLUP,
GPIO30_U2_TXD | PIN_OUTPUT_HIGH,
GPIO31_U2_CTSn | PIN_INPUT_PULLUP,
GPIO32_U2_RTSn | PIN_OUTPUT_HIGH,
/* Display & HDMI HW sync */
GPIO68_LCD_VSI0 | PIN_INPUT_PULLUP,
GPIO69_LCD_VSI1 | PIN_INPUT_PULLUP,
};
static pin_cfg_t mop500_pins_default[] = {
/* SSP0 */
GPIO143_SSP0_CLK,
GPIO144_SSP0_FRM,
GPIO145_SSP0_RXD | PIN_PULL_DOWN,
GPIO146_SSP0_TXD,
GPIO217_GPIO | PIN_INPUT_PULLUP, /* TC35892 IRQ */
/* SDI0 (MicroSD card) */
GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH,
/* UART */
GPIO4_U1_RXD | PIN_INPUT_PULLUP,
GPIO5_U1_TXD | PIN_OUTPUT_HIGH,
GPIO6_U1_CTSn | PIN_INPUT_PULLUP,
GPIO7_U1_RTSn | PIN_OUTPUT_HIGH,
};
static pin_cfg_t mop500_pins_hrefv60[] = {
/* WLAN */
GPIO4_GPIO | PIN_INPUT_PULLUP,/* WLAN_IRQ */
GPIO85_GPIO | PIN_OUTPUT_LOW,/* WLAN_ENA */
/* XENON Flashgun INTERFACE */
GPIO6_IP_GPIO0 | PIN_INPUT_PULLUP,/* XENON_FLASH_ID */
GPIO7_IP_GPIO1 | PIN_INPUT_PULLUP,/* XENON_READY */
GPIO170_GPIO | PIN_OUTPUT_LOW, /* XENON_CHARGE */
/* Assistant LED INTERFACE */
GPIO21_GPIO | PIN_OUTPUT_LOW, /* XENON_EN1 */
GPIO64_IP_GPIO4 | PIN_OUTPUT_LOW, /* XENON_EN2 */
/* Magnetometer */
GPIO31_GPIO | PIN_INPUT_PULLUP, /* magnetometer_INT */
GPIO32_GPIO | PIN_INPUT_PULLDOWN, /* Magnetometer DRDY */
/* Display Interface */
GPIO65_GPIO | PIN_OUTPUT_LOW, /* DISP1 RST */
GPIO66_GPIO | PIN_OUTPUT_LOW, /* DISP2 RST */
/* Touch screen INTERFACE */
GPIO143_GPIO | PIN_OUTPUT_LOW,/*TOUCH_RST1 */
/* Touch screen INTERFACE 2 */
GPIO67_GPIO | PIN_INPUT_PULLUP, /* TOUCH_INT2 */
GPIO146_GPIO | PIN_OUTPUT_LOW,/*TOUCH_RST2 */
/* ETM_PTM_TRACE INTERFACE */
GPIO70_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA23 */
GPIO71_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA22 */
GPIO72_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA21 */
GPIO73_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA20 */
GPIO74_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA19 */
/* NAHJ INTERFACE */
GPIO76_GPIO | PIN_OUTPUT_LOW,/* NAHJ_CTRL */
GPIO216_GPIO | PIN_OUTPUT_HIGH,/* NAHJ_CTRL_INV */
/* NFC INTERFACE */
GPIO77_GPIO | PIN_OUTPUT_LOW, /* NFC_ENA */
GPIO144_GPIO | PIN_INPUT_PULLDOWN, /* NFC_IRQ */
GPIO142_GPIO | PIN_OUTPUT_LOW, /* NFC_RESET */
/* Keyboard MATRIX INTERFACE */
GPIO90_MC5_CMD | PIN_OUTPUT_LOW, /* KP_O_1 */
GPIO87_MC5_DAT1 | PIN_OUTPUT_LOW, /* KP_O_2 */
GPIO86_MC5_DAT0 | PIN_OUTPUT_LOW, /* KP_O_3 */
GPIO96_KP_O6 | PIN_OUTPUT_LOW, /* KP_O_6 */
GPIO94_KP_O7 | PIN_OUTPUT_LOW, /* KP_O_7 */
GPIO93_MC5_DAT4 | PIN_INPUT_PULLUP, /* KP_I_0 */
GPIO89_MC5_DAT3 | PIN_INPUT_PULLUP, /* KP_I_2 */
GPIO88_MC5_DAT2 | PIN_INPUT_PULLUP, /* KP_I_3 */
GPIO91_GPIO | PIN_INPUT_PULLUP, /* FORCE_SENSING_INT */
GPIO92_GPIO | PIN_OUTPUT_LOW, /* FORCE_SENSING_RST */
GPIO97_GPIO | PIN_OUTPUT_LOW, /* FORCE_SENSING_WU */
/* DiPro Sensor Interface */
GPIO139_GPIO | PIN_INPUT_PULLUP, /* DIPRO_INT */
/* HAL SWITCH INTERFACE */
GPIO145_GPIO | PIN_INPUT_PULLDOWN,/* HAL_SW */
/* Audio Amplifier Interface */
GPIO149_GPIO | PIN_OUTPUT_LOW, /* VAUDIO_HF_EN */
/* GBF INTERFACE */
GPIO171_GPIO | PIN_OUTPUT_LOW, /* GBF_ENA_RESET */
/* MSP : HDTV INTERFACE */
GPIO192_GPIO | PIN_INPUT_PULLDOWN,
/* ACCELEROMETER_INTERFACE */
GPIO82_GPIO | PIN_INPUT_PULLUP, /* ACC_INT1 */
GPIO83_GPIO | PIN_INPUT_PULLUP, /* ACC_INT2 */
/* Proximity Sensor */
GPIO217_GPIO | PIN_INPUT_PULLUP,
/* touch screen */
GPIO84_GPIO | PIN_INPUT_PULLUP,
/* USB OTG */
GPIO256_USB_NXT | PIN_PULL_DOWN,
GPIO257_USB_STP | PIN_PULL_UP,
GPIO258_USB_XCLK | PIN_PULL_DOWN,
GPIO259_USB_DIR | PIN_PULL_DOWN,
GPIO260_USB_DAT7 | PIN_PULL_DOWN,
GPIO261_USB_DAT6 | PIN_PULL_DOWN,
GPIO262_USB_DAT5 | PIN_PULL_DOWN,
GPIO263_USB_DAT4 | PIN_PULL_DOWN,
GPIO264_USB_DAT3 | PIN_PULL_DOWN,
GPIO265_USB_DAT2 | PIN_PULL_DOWN,
GPIO266_USB_DAT1 | PIN_PULL_DOWN,
GPIO267_USB_DAT0 | PIN_PULL_DOWN,
};
void __init mop500_pins_init(void)
{
nmk_config_pins(mop500_pins,
ARRAY_SIZE(mop500_pins));
nmk_config_pins(mop500_pins_common,
ARRAY_SIZE(mop500_pins_common));
if (machine_is_hrefv60())
nmk_config_pins(mop500_pins_hrefv60,
ARRAY_SIZE(mop500_pins_hrefv60));
else
nmk_config_pins(mop500_pins_default,
ARRAY_SIZE(mop500_pins_default));
}

View File

@ -12,59 +12,14 @@
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <plat/pincfg.h>
#include <plat/ste_dma40.h>
#include <mach/devices.h>
#include <mach/hardware.h>
#include "devices-db8500.h"
#include "pins-db8500.h"
#include "board-mop500.h"
#include "ste-dma40-db8500.h"
static pin_cfg_t mop500_sdi_pins[] = {
/* SDI0 (MicroSD slot) */
GPIO18_MC0_CMDDIR,
GPIO19_MC0_DAT0DIR,
GPIO20_MC0_DAT2DIR,
GPIO21_MC0_DAT31DIR,
GPIO22_MC0_FBCLK,
GPIO23_MC0_CLK,
GPIO24_MC0_CMD,
GPIO25_MC0_DAT0,
GPIO26_MC0_DAT1,
GPIO27_MC0_DAT2,
GPIO28_MC0_DAT3,
/* SDI4 (on-board eMMC) */
GPIO197_MC4_DAT3,
GPIO198_MC4_DAT2,
GPIO199_MC4_DAT1,
GPIO200_MC4_DAT0,
GPIO201_MC4_CMD,
GPIO202_MC4_FBCLK,
GPIO203_MC4_CLK,
GPIO204_MC4_DAT7,
GPIO205_MC4_DAT6,
GPIO206_MC4_DAT5,
GPIO207_MC4_DAT4,
};
static pin_cfg_t mop500_sdi2_pins[] = {
/* SDI2 (POP eMMC) */
GPIO128_MC2_CLK,
GPIO129_MC2_CMD,
GPIO130_MC2_FBCLK,
GPIO131_MC2_DAT0,
GPIO132_MC2_DAT1,
GPIO133_MC2_DAT2,
GPIO134_MC2_DAT3,
GPIO135_MC2_DAT4,
GPIO136_MC2_DAT5,
GPIO137_MC2_DAT6,
GPIO138_MC2_DAT7,
};
/*
* SDI 0 (MicroSD slot)
*/
@ -216,22 +171,16 @@ static struct mmci_platform_data mop500_sdi4_data = {
void __init mop500_sdi_init(void)
{
nmk_config_pins(mop500_sdi_pins, ARRAY_SIZE(mop500_sdi_pins));
/* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
if (!cpu_is_u8500v10())
mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
db8500_add_sdi2(&mop500_sdi2_data);
/* On-board eMMC */
db8500_add_sdi4(&mop500_sdi4_data);
/*
* sdi0 will finally be added when the TC35892 initializes and calls
* mop500_sdi_tc35892_init() above.
*/
/* PoP:ed eMMC */
if (!cpu_is_u8500ed()) {
nmk_config_pins(mop500_sdi2_pins, ARRAY_SIZE(mop500_sdi2_pins));
/* POP eMMC on v1.0 has problems with high speed */
if (!cpu_is_u8500v10())
mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
db8500_add_sdi2(&mop500_sdi2_data);
}
/* On-board eMMC */
db8500_add_sdi4(&mop500_sdi4_data);
}