diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index e81ba6f5e1c8..66e81c48ee21 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -196,7 +196,7 @@ Description: Raw capacitance measurement from channel Y. Units after application of scale and offset are nanofarads. -What: /sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw +What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw KernelVersion: 3.2 Contact: linux-iio@vger.kernel.org Description: @@ -207,6 +207,25 @@ Description: is required is a consistent labeling. Units after application of scale and offset are nanofarads. +What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_zeropoint +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + For differential channels, this an offset that is applied + equally to both inputs. As the reading is of the difference + between the two inputs, this should not be applied to the _raw + reading by userspace (unlike _offset) and unlike calibbias + it does not affect the differential value measured because + the effect of _zeropoint cancels out across the two inputs + that make up the differential pair. It's purpose is to bring + the individual signals, before the differential is measured, + within the measurement range of the device. The naming is + chosen because if the separate inputs that make the + differential pair are drawn on a graph in their + _raw units, this is the value that the zero point on the + measurement axis represents. It is expressed with the + same scaling as _raw. + What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw @@ -2038,3 +2057,83 @@ Description: Available range for the forced calibration value, expressed as: - a range specified as "[min step max]" + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageX_sampling_frequency +What: /sys/bus/iio/devices/iio:deviceX/in_powerY_sampling_frequency +What: /sys/bus/iio/devices/iio:deviceX/in_currentZ_sampling_frequency +KernelVersion: 5.20 +Contact: linux-iio@vger.kernel.org +Description: + Some devices have separate controls of sampling frequency for + individual channels. If multiple channels are enabled in a scan, + then the sampling_frequency of the scan may be computed from the + per channel sampling frequencies. + +What: /sys/.../events/in_accel_gesture_singletap_en +What: /sys/.../events/in_accel_gesture_doubletap_en +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Device generates an event on a single or double tap. + +What: /sys/.../events/in_accel_gesture_singletap_value +What: /sys/.../events/in_accel_gesture_doubletap_value +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the threshold value that the device is comparing + against to generate the tap gesture event. The lower + threshold value increases the sensitivity of tap detection. + Units and the exact meaning of value are device-specific. + +What: /sys/.../events/in_accel_gesture_tap_value_available +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Lists all available threshold values which can be used to + modify the sensitivity of the tap detection. + +What: /sys/.../events/in_accel_gesture_singletap_reset_timeout +What: /sys/.../events/in_accel_gesture_doubletap_reset_timeout +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the timeout value in seconds for the tap detector + to not to look for another tap event after the event as + occurred. Basically the minimum quiet time between the two + single-tap's or two double-tap's. + +What: /sys/.../events/in_accel_gesture_tap_reset_timeout_available +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Lists all available tap reset timeout values. Units in seconds. + +What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the minimum quiet time in seconds between the two + taps of a double tap. + +What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay_available +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Lists all available delay values between two taps in the double + tap. Units in seconds. + +What: /sys/.../events/in_accel_gesture_tap_maxtomin_time +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the maximum time difference allowed between upper + and lower peak of tap to consider it as the valid tap event. + Units in seconds. + +What: /sys/.../events/in_accel_gesture_tap_maxtomin_time_available +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Lists all available time values between upper peak to lower + peak. Units in seconds. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746 b/Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746 new file mode 100644 index 000000000000..02ca8941dce1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746 @@ -0,0 +1,11 @@ +What: /sys/.../iio:deviceX/in_capacitableY_calibbias_calibration +What: /sys/.../iio:deviceX/in_capacitableY_calibscale_calibration +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Write 1 to trigger a calibration of the calibbias or + calibscale. For calibscale, a full scale capacitance should + be connected to the capacitance input and a + calibscale_calibration then started. For calibbias see + the device datasheet section on "capacitive system offset + calibration". diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml index 6f8f8a6258fe..7332442e5661 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml @@ -27,15 +27,16 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdd-supply: true required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml index 8d829ef878bc..f6f97164c2ca 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml @@ -25,14 +25,15 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml index d6afc1b8c272..05fa7af409cc 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml @@ -24,8 +24,6 @@ properties: spi-3wire: true - spi-max-frequency: true - vs-supply: description: Regulator that supplies power to the accelerometer @@ -48,7 +46,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml index 9bb039e2f533..346abfb13a3a 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -32,8 +32,6 @@ properties: spi-cpol: true - spi-max-frequency: true - interrupts: maxItems: 1 @@ -42,7 +40,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml index ba54d6998f2e..14b487088ab4 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml @@ -45,13 +45,14 @@ properties: vddio-supply: description: Regulator that provides power to the bus - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml index d259e796c1d6..f10d98d34cb8 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml @@ -35,8 +35,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vddio-supply: true @@ -45,7 +43,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml index 38b59b6454ce..73a5c8f814cc 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml @@ -25,14 +25,15 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml index 942b23ad0712..5dd06f5905b4 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml @@ -20,8 +20,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdda-supply: true vddd-supply: true vddio-supply: true @@ -30,7 +28,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml index 478e75ae0885..457a709b583c 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml @@ -72,7 +72,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml index 272eb48eef5a..3cb82576d758 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml @@ -24,8 +24,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vddio-supply: true @@ -50,7 +48,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml index 9c7c66feeffc..c8659c5eba2a 100644 --- a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml +++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml @@ -39,13 +39,14 @@ properties: - "INT1" - "INT2" - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml index 390b87242fcb..f64d99b35492 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml @@ -29,13 +29,14 @@ properties: mount-matrix: description: an optional 3x3 mounting rotation matrix. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml new file mode 100644 index 000000000000..23528dcaa073 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MEMSensing digital 3-Axis accelerometer + +maintainers: + - Dmitry Rokosov + +description: | + MSA311 is a tri-axial, low-g accelerometer with I2C digital output for + sensitivity consumer applications. It has dynamical user selectable full + scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements + with output data rates from 1Hz to 1000Hz. + Datasheet can be found at following URL + https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf + +properties: + compatible: + const: memsensing,msa311 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@62 { + compatible = "memsensing,msa311"; + reg = <0x62>; + interrupt-parent = <&gpio_intc>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&vcc_5v>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml index f6e2a16a710b..00c990caa1e4 100644 --- a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml +++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml @@ -29,7 +29,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml index ad529ab2c6e2..65ce8ea14b52 100644 --- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml +++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml @@ -27,8 +27,6 @@ properties: vdd-supply: description: phandle to the regulator that provides power to the accelerometer - spi-max-frequency: true - interrupts: maxItems: 1 @@ -44,7 +42,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml index fb3d0dae9bae..75a7184a4735 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -52,8 +52,6 @@ properties: avdd-supply: description: avdd supply can be used as reference for conversion. - spi-max-frequency: true - required: - compatible - reg @@ -106,7 +104,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index 22b7ed3723f6..cc347dade4ef 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -30,8 +30,6 @@ properties: spi-cpha: true - spi-max-frequency: true - clocks: maxItems: 1 description: phandle to the master clock (mclk) @@ -94,7 +92,10 @@ required: - spi-cpol - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml index a694d5794d4a..dfb8f305e2f0 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml @@ -28,8 +28,6 @@ properties: description: IRQ line for the ADC maxItems: 1 - spi-max-frequency: true - adi,voltage-alert-last-chan: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -55,7 +53,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml index a3e39a40c9b3..1bfbeed6f299 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml @@ -30,8 +30,6 @@ properties: spi-cpha: true - spi-max-frequency: true - '#address-cells': const: 1 @@ -65,7 +63,10 @@ patternProperties: additionalProperties: true -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml index ca414bb396c5..cd8ac5162d27 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml @@ -24,13 +24,15 @@ properties: vref-supply: true vdd-supply: true - spi-max-frequency: true required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml index 666414a9c0de..44c671eeda73 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml @@ -66,8 +66,6 @@ properties: to the other supplies. Needed to be able to establish channel scaling unless there is also an internal reference available (e.g. ad7091r) - spi-max-frequency: true - adi,conversion-start-gpios: description: A GPIO used to trigger the start of a conversion maxItems: 1 @@ -76,9 +74,9 @@ required: - compatible - reg -additionalProperties: false - allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + # Devices where reference is vcc - if: properties: @@ -158,6 +156,8 @@ allOf: properties: adi,conversion-start-gpios: false +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 516fc24d3346..ac5a47c8f070 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -32,8 +32,6 @@ properties: spi-cpol: true - spi-max-frequency: true - avcc-supply: true interrupts: @@ -105,7 +103,10 @@ required: - interrupts - adi,conversion-start-gpios -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml index a85a28145ef6..3ce59d4d065f 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml @@ -50,8 +50,6 @@ properties: reset-gpios: maxItems: 1 - spi-max-frequency: true - spi-cpol: true spi-cpha: true @@ -88,7 +86,10 @@ patternProperties: - reg additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml index e82194974eea..40b0a887db57 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml @@ -8,7 +8,6 @@ title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs. maintainers: - Michael Hennerich - - Patrick Vasseur description: | Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908, @@ -43,13 +42,14 @@ properties: '#size-cells': const: 0 - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml index 0b10ed5f74ae..9ee4d977c5ed 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml @@ -49,8 +49,6 @@ properties: default: 4096000 - spi-max-frequency: true - '#io-channel-cells': const: 1 @@ -64,7 +62,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml index 52490cbb0af0..56bcbe5dcd79 100644 --- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml +++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml @@ -24,8 +24,6 @@ properties: GPIO used for controlling the reset pin maxItems: 1 - spi-max-frequency: true - "#io-channel-cells": const: 1 @@ -33,7 +31,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml index 0bd2fc0356c8..5207c919abe0 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -22,15 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: - description: maximal spi bus frequency supported - required: - compatible - vref-supply - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml index 46b7747076b9..d0a7ed26d9ea 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml @@ -45,7 +45,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml index 0cf87556ef82..4f74cb33383a 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml @@ -26,13 +26,16 @@ properties: minimum: 100000 maximum: 4800000 -additionalProperties: false - required: - compatible - reg - vref-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml index e948b3e37b0c..bb336e33ebe2 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml @@ -28,23 +28,25 @@ properties: vref-supply: description: External reference, needed to establish input scaling -if: - properties: - compatible: - contains: - const: maxim,max1118 -then: - required: - - vref-supply -else: - properties: - vref-supply: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + const: maxim,max1118 + then: + required: + - vref-supply + else: + properties: + vref-supply: false required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml new file mode 100644 index 000000000000..5f9e043cf5cd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max11205.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX11205 ADC + +maintainers: + - Ramona Bolboaca + +description: | + The MAX11205 is an ultra-low-power (< 300FA max active current), + high-resolution, serial-output ADC. + + https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - maxim,max11205a + - maxim,max11205b + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + spi-max-frequency: + maximum: 5000000 + + spi-cpha: true + + vref-supply: + description: + The regulator supply for the ADC reference voltage. This is a differential + reference. It is equal to the V_REFP - V_REFN. The maximum value is 3.6V. + +required: + - compatible + - reg + - interrupts + - spi-max-frequency + - spi-cpha + - vref-supply + +unevaluatedProperties: false + +examples: + - | + #include + spi { + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "maxim,max11205a"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + interrupt-parent = <&gpio>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; + vref-supply = <&max11205_vref>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml index 4c7e0d94bff1..58b12fe8070c 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml @@ -39,15 +39,16 @@ properties: thus enabling power-down mode. maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - vdd-supply - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml index fcc1ba53b20d..18108f0f3731 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml @@ -32,7 +32,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true spi-cpol: true @@ -51,7 +50,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 95ab285f4eba..067a7bbadab8 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -51,7 +51,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index 74a4a9d95798..8bac0c4120dd 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -58,6 +58,7 @@ required: patternProperties: "^.*@[0-9a-f]+$": type: object + additionalProperties: false description: | Represents the external channels which are connected to the ADC. For compatible property "qcom,spmi-vadc" following channels, also known as diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml new file mode 100644 index 000000000000..88e008629ea8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC + +maintainers: + - ChiYuan Huang + +description: | + The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus + interface, and the device provides full information for system by reading + out the loading current and power. + + The device monitors both of the drops across sense resistor and the BUS + voltage, converts into the current in amperes, and power in watts through + internal analog-to-digital converter ADC. The programmable calibration, + adjustable conversion time, and averaging function are also built in for + more design flexibility. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf + +properties: + compatible: + const: richtek,rtq6056 + + reg: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + shunt-resistor-micro-ohms: + description: Shunt IN+/IN- sensing node resistor + +required: + - compatible + - reg + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + adc@40 { + compatible = "richtek,rtq6056"; + reg = <0x40>; + #io-channel-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 92f9472a77ae..1970503389aa 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -72,6 +72,7 @@ additionalProperties: false patternProperties: "^filter@[0-9]+$": type: object + unevaluatedProperties: false description: child node properties: @@ -225,6 +226,7 @@ patternProperties: patternProperties: "^dfsdm-dai+$": type: object + additionalProperties: false description: child node properties: diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml index 9049c699152f..333744a2159c 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml @@ -13,8 +13,7 @@ description: This ADC forms part of an ST microelectronics STMPE multifunction device . The ADC is shared with the STMPE touchscreen. As a result some ADC related settings are specified in the parent node. - The node name myst be stmpe_adc and should be a child node of the stmpe node - to which it belongs. + The node should be a child node of the stmpe node to which it belongs. properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml index f5a923cc847f..686721176a58 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml @@ -24,8 +24,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: External reference, needed to establish input scaling @@ -37,7 +35,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml index 1a113b30a414..726d2cbfa368 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml @@ -19,8 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: External reference, needed to establish input scaling @@ -37,7 +35,10 @@ required: - spi-cpol - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml index ae5ce60987fe..9b072b057f16 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml @@ -19,7 +19,6 @@ properties: reg: true vref-supply: true - spi-max-frequency: true "#io-channel-cells": const: 1 @@ -28,7 +27,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml index ec3b2edf1fb7..076088a328c3 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml @@ -31,8 +31,6 @@ properties: maxItems: 1 description: Conversion clock input. - spi-max-frequency: true - vref-p-supply: description: The regulator supply for positive analog voltage reference @@ -62,7 +60,10 @@ required: - clocks - vref-p-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml index d54a0183f024..775eee972b12 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml @@ -27,8 +27,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true "#io-channel-cells": @@ -39,7 +37,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml index 3f4f334d6f73..afe782522904 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml @@ -21,8 +21,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdda-supply: true "#io-channel-cells": @@ -32,7 +30,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml index a3b79438a13a..2c3c2cf2145c 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml @@ -43,6 +43,7 @@ additionalProperties: false patternProperties: "^channel@[0-7]+$": type: object + additionalProperties: false description: Child nodes needed for each channel that the platform uses. diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml index 2e6abc9d746a..56a3f1766aab 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml @@ -18,8 +18,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - spi-cpha: true reset-gpios: @@ -32,7 +30,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml index e0670e3fbb72..55c2c73626f4 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs maintainers: - - Tomislav Denis + - Jonathan Cameron description: | The ADS131E0x are a family of multichannel, simultaneous sampling, @@ -28,8 +28,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - spi-cpha: true clocks: @@ -120,7 +118,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml index b8c398187d5c..f75b2c702986 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml @@ -19,8 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: Supply the 2.5V or 5V reference voltage @@ -32,7 +30,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml index a0af4b24877f..f26fdbc15f84 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml @@ -25,13 +25,14 @@ properties: description: Optional external reference. If not supplied, assume REFSEL input tied low to enable the internal reference. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml index d6f21d5cccd7..b32be24a9f98 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml @@ -11,9 +11,14 @@ maintainers: properties: compatible: - enum: - - ti,am3359-adc - - ti,am4372-adc + oneOf: + - enum: + - ti,am3359-adc + - ti,am4372-adc + - items: + - enum: + - ti,am654-adc + - const: ti,am3359-adc '#io-channel-cells': const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml index 6c2539b3d707..314d1d99bf73 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml @@ -21,8 +21,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true "#io-channel-cells": @@ -33,7 +31,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml index 601d69971d84..bdf3bba2d750 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml @@ -23,7 +23,8 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true + vref-supply: + description: Optional supply of the reference voltage "#io-channel-cells": const: 1 @@ -59,7 +60,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml index 3698b4b0900f..be93c109d6ac 100644 --- a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml +++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml @@ -134,6 +134,7 @@ properties: ams-pl@400: type: object + additionalProperties: false description: PL-SYSMON is capable of monitoring off chip voltage and temperature. PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml index baa65a521bad..03bb90a7f4f8 100644 --- a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml @@ -63,6 +63,7 @@ additionalProperties: false patternProperties: "^channel@[0-3]$": type: object + additionalProperties: false description: Represents the external channels which are connected to the device. properties: diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml index 5277479be382..c15da155d300 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml @@ -27,14 +27,15 @@ properties: Enable internal buffer to drive the reference pin. type: boolean - spi-max-frequency: true - required: - compatible - reg - avdd-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml index 9c48c76993fe..fee0f023a8c8 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml @@ -78,6 +78,7 @@ patternProperties: custom-output-range-config: type: object + additionalProperties: false description: Configuration of custom range when adi,output-range-microvolt is not present. The formulas for calculation the output voltages are diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml index 05ed4e0ec364..c04165fa9259 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml @@ -95,15 +95,12 @@ properties: vrefD-supply: true vref-supply: true - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - # Shared external vref, no internal reference if: properties: @@ -232,6 +229,8 @@ allOf: - vrefA-supply - vrefB-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml index 65f86f26947c..86e2884cdfb1 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml @@ -28,10 +28,6 @@ properties: vref1-supply: true vref2-supply: true - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg @@ -39,6 +35,7 @@ required: - vref1-supply allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -63,6 +60,8 @@ allOf: required: - vref2-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml index d599b418a020..ff50c72c62b5 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml @@ -39,14 +39,15 @@ properties: description: If not supplied devices will use internal regulators. - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml index 188f656617e3..52d089ebde95 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml @@ -26,13 +26,14 @@ properties: maxItems: 1 description: Fault signal. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml index 044332c97743..d2af2d491986 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml @@ -27,19 +27,16 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - VREF-supply: true VREFA-supply: true VREFB-supply: true -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -72,6 +69,8 @@ allOf: - VREFA-supply - VREFB-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml index 330383b85eeb..4d5111a5f9bd 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml @@ -22,17 +22,18 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: If not present, internal reference will be used. -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml index 5c26441eae9f..13f214234b8e 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml @@ -53,14 +53,15 @@ properties: vcc-supply: description: If not supplied the internal reference is used. - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml index f866b88e1440..9a3c2926bf85 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml @@ -25,8 +25,6 @@ properties: description: Either this or spi-cpol but not both. spi-cpol: true - spi-max-frequency: true - adi,ext-dc-dc-compenstation-resistor: $ref: /schemas/types.yaml#/definitions/flag description: @@ -67,8 +65,6 @@ required: - compatible - reg -additionalProperties: false - patternProperties: "^channel@[0-7]$": type: object @@ -123,6 +119,11 @@ oneOf: - required: - spi-cpol +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml index fd4edca34a28..e49e7556175d 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml @@ -16,7 +16,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true adi,dc-dc-mode: @@ -99,6 +98,7 @@ required: - adi,dc-dc-mode allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: adi,dc-dc-mode: @@ -115,7 +115,7 @@ allOf: required: - adi,range-microvolt -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml index 7f95a9ed55fe..df550b5af2f7 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml @@ -22,18 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: If not supplied, internal reference will be used. -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -45,6 +42,8 @@ allOf: required: - vref-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml index 8e893d52bfb1..0b409a727a43 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml @@ -22,18 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vrefAB-supply: true vrefCD-supply: true -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -46,6 +43,8 @@ allOf: - vrefAB-supply - vrefCD-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml index 24ac40180ac1..8e7da0de918f 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml @@ -49,8 +49,6 @@ properties: asserted during driver probe. maxItems: 1 - spi-max-frequency: true - '#address-cells': const: 1 @@ -62,6 +60,7 @@ properties: connected to the DAC. Channel 0 can act both as a current source and sink. type: object + additionalProperties: false properties: reg: @@ -85,6 +84,7 @@ properties: description: Represents an external channel which are connected to the DAC. type: object + additionalProperties: false properties: reg: @@ -101,6 +101,7 @@ properties: description: Represents an external channel which are connected to the DAC. type: object + additionalProperties: false properties: reg: @@ -116,6 +117,7 @@ properties: patternProperties: "^channel@([3-5])$": type: object + additionalProperties: false description: Represents the external channels which are connected to the DAC. properties: reg: @@ -138,7 +140,10 @@ required: - channel@4 - channel@5 -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml index 650d1ebdcec3..3a84739736f6 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml @@ -23,19 +23,20 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vss-supply: true -additionalProperties: false - required: - compatible - reg - vdd-supply - vss-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml index 6a3990a8d0ad..1849a2ff05c7 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml @@ -19,19 +19,16 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vrefh-supply: true vrefl-supply: true -additionalProperties: false - required: - compatible - reg - vrefh-supply allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -44,6 +41,8 @@ allOf: properties: vrefl-supply: false +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml index 48f9e7d29423..15cc6bf59b13 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml @@ -48,6 +48,7 @@ properties: patternProperties: "^channel@([0-9]|1[0-5])$": type: object + additionalProperties: false properties: reg: diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml index 4c430abcdbf9..19374401e509 100644 --- a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml +++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml @@ -21,17 +21,18 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true -additionalProperties: false - required: - compatible - reg - vref-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml index b0157050f1ee..201b04af2b22 100644 --- a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml @@ -33,21 +33,22 @@ properties: vref-supply: description: Needed to provide output scaling. - spi-max-frequency: true - required: - compatible - reg - vref-supply -additionalProperties: false - oneOf: - required: - spi-cpha - required: - spi-cpol +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | vref_2v5_reg: regulator-vref { diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml index 10be98d1f19c..a6814587dbc4 100644 --- a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml @@ -24,14 +24,15 @@ properties: Reference voltage must be supplied to establish the scaling of the output voltage. - spi-max-frequency: true - required: - compatible - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml index d172b142f6ed..20dd1370660d 100644 --- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml @@ -29,13 +29,14 @@ properties: DACs are loaded when the pin connected to this GPIO is pulled low. maxItems: 1 - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml index 6b3a611e1cf1..0144f74a4768 100644 --- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml +++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml @@ -40,15 +40,16 @@ properties: output stage will shut down until the ADF4371/ADF4372 achieves lock as measured by the digital lock detect circuitry. - spi-max-frequency: true - required: - compatible - reg - clocks - clock-names -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml index d861526c5c42..6c5ad426a016 100644 --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml @@ -25,14 +25,15 @@ properties: reset-gpios: true - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml index 340be256f283..d166dbca18c3 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml @@ -25,8 +25,6 @@ properties: spi-cpol: true - spi-max-frequency: true - interrupts: maxItems: 1 @@ -35,7 +33,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml index dd29dc6c4c19..56e0dc20f5e4 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml @@ -47,8 +47,6 @@ properties: - DIO3 - DIO4 - spi-max-frequency: true - spi-cpha: true spi-cpol: true @@ -96,8 +94,6 @@ properties: - DIO3 - DIO4 -additionalProperties: false - required: - compatible - reg @@ -106,6 +102,11 @@ required: - spi-cpol - spi-max-frequency +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml index 6e73cd889b5c..a0760382548d 100644 --- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml @@ -46,13 +46,14 @@ properties: mount-matrix: description: an optional 3x3 mounting rotation matrix - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml index 4c1c083d0e92..488349755c99 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml @@ -47,7 +47,6 @@ properties: vddio-supply: description: Regulator that provides power to the bus - spi-max-frequency: true spi-cpha: true spi-cpol: true @@ -56,7 +55,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index 3ebc6526d82d..ec64d7877fe5 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -40,8 +40,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vddio-supply: true @@ -54,6 +52,7 @@ properties: These devices also support an auxiliary i2c bus via an i2c-gate. allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: not: properties: @@ -67,7 +66,7 @@ allOf: properties: i2c-gate: false -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml index 0203b83b8587..24416b59b782 100644 --- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml +++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml @@ -36,13 +36,14 @@ properties: drive-open-drain: type: boolean - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml index 5d4839f00898..0ceb29fb01b7 100644 --- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml @@ -45,8 +45,6 @@ properties: description: Supports up to 2 interrupt lines via the INT1 and INT2 pins. - spi-max-frequency: true - vdd-supply: description: if defined provides VDD power to the sensor. @@ -81,12 +79,15 @@ properties: wakeup-source: $ref: /schemas/types.yaml#/definitions/flag -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml new file mode 100644 index 000000000000..7de1b0e721ca --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LTRF216A Ambient Light Sensor + +maintainers: + - Shreeya Patel + +description: + Ambient light sensing with an i2c interface. + +properties: + compatible: + const: liteon,ltrf216a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@53 { + compatible = "liteon,ltrf216a"; + reg = <0x53>; + vdd-supply = <&vdd_regulator>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml index 567697d996ec..87e88f2a9908 100644 --- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml +++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml @@ -25,14 +25,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml index 32e92bced81f..896fe0b5edcc 100644 --- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml +++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml @@ -80,14 +80,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml index be2be4b556db..1f9fe15b4b3c 100644 --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: All Sensors DLH series low voltage digital pressure sensors maintainers: - - Tomislav Denis + - Jonathan Cameron description: | Bindings for the All Sensors DLH series pressure sensors. diff --git a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml index a88b3b14d6bd..dd2ae2bd1ad7 100644 --- a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml +++ b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml @@ -40,10 +40,6 @@ properties: description: Reset the sensorhub. - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg @@ -52,6 +48,11 @@ required: - mcu-ap-gpios - mcu-reset-gpios +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml index 9969bac66aa1..0805ed7e2113 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml @@ -32,7 +32,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true required: @@ -40,6 +39,7 @@ required: - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -53,7 +53,7 @@ allOf: properties: spi-cpha: false -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml index 873b34766676..228a94165487 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml @@ -19,7 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true thermocouple-type: @@ -34,7 +33,10 @@ required: - reg - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml index aafb33b16549..a2823ed6867b 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml @@ -25,7 +25,6 @@ properties: enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection. type: boolean - spi-max-frequency: true spi-cpha: true required: @@ -33,7 +32,10 @@ required: - reg - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml index b547ddcd544a..4a55e7f25ae7 100644 --- a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml @@ -35,6 +35,9 @@ properties: maxItems: 1 description: Default is 0x3a, but can be reprogrammed. + vdd-supply: + description: provide VDD power to the sensor. + required: - compatible - reg @@ -50,6 +53,7 @@ examples: temp-sensor@3a { compatible = "melexis,mlx90632"; reg = <0x3a>; + vdd-supply = <&ldo4_reg>; }; }; ... diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 2f0151e9f6be..b1818b4eb972 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -777,6 +777,8 @@ patternProperties: description: MELFAS Inc. "^mellanox,.*": description: Mellanox Technologies + "^memsensing,.*": + description: MEMSensing Microsystems Co., Ltd. "^memsic,.*": description: MEMSIC Inc. "^menlo,.*": diff --git a/MAINTAINERS b/MAINTAINERS index da6d4fd517b0..3e0be733e898 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -620,7 +620,7 @@ ADXL367 THREE-AXIS DIGITAL ACCELEROMETER DRIVER M: Cosmin Tanislav L: linux-iio@vger.kernel.org S: Supported -W: http://ez.analog.com/community/linux-device-drivers +W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml F: drivers/iio/accel/adxl367* @@ -754,14 +754,6 @@ L: Dell.Client.Kernel@dell.com S: Maintained F: drivers/platform/x86/dell/alienware-wmi.c -ALL SENSORS DLH SERIES PRESSURE SENSORS DRIVER -M: Tomislav Denis -L: linux-iio@vger.kernel.org -S: Maintained -W: http://www.allsensors.com/ -F: Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml -F: drivers/iio/pressure/dlhl60d.c - ALLEGRO DVT VIDEO IP CORE DRIVER M: Michael Tretter R: Pengutronix Kernel Team @@ -1152,7 +1144,7 @@ ANALOG DEVICES INC AD74413R DRIVER M: Cosmin Tanislav L: linux-iio@vger.kernel.org S: Supported -W: http://ez.analog.com/community/linux-device-drivers +W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml F: drivers/iio/addac/ad74413r.c F: include/dt-bindings/iio/addac/adi,ad74413r.h @@ -1382,7 +1374,7 @@ APEX EMBEDDED SYSTEMS STX104 IIO DRIVER M: William Breathitt Gray L: linux-iio@vger.kernel.org S: Maintained -F: drivers/iio/adc/stx104.c +F: drivers/iio/addac/stx104.c APM DRIVER M: Jiri Kosina @@ -11929,7 +11921,7 @@ LTC2688 IIO DAC DRIVER M: Nuno Sá L: linux-iio@vger.kernel.org S: Supported -W: http://ez.analog.com/community/linux-device-drivers +W: https://ez.analog.com/linux-software-drivers F: Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 F: Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml F: drivers/iio/dac/ltc2688.c @@ -12346,6 +12338,14 @@ S: Maintained F: Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml F: drivers/iio/proximity/mb1232.c +MAXIM MAX11205 DRIVER +M: Ramona Bolboaca +L: linux-iio@vger.kernel.org +S: Supported +W: https://ez.analog.com/linux-software-drivers +F: Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml +F: drivers/iio/adc/max11205.c + MAXIM MAX17040 FAMILY FUEL GAUGE DRIVERS R: Iskren Chernev R: Krzysztof Kozlowski @@ -13190,6 +13190,13 @@ F: drivers/mtd/ F: include/linux/mtd/ F: include/uapi/mtd/ +MEMSENSING MICROSYSTEMS MSA311 DRIVER +M: Dmitry Rokosov +L: linux-iio@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml +F: drivers/iio/accel/msa311.c + MEN A21 WATCHDOG DRIVER M: Johannes Thumshirn L: linux-watchdog@vger.kernel.org @@ -13411,7 +13418,7 @@ MICROCHIP MCP3911 ADC DRIVER M: Marcus Folkesson M: Kent Gustavsson L: linux-iio@vger.kernel.org -S: Supported +S: Maintained F: Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml F: drivers/iio/adc/mcp3911.c @@ -20260,13 +20267,6 @@ M: Robert Richter S: Odd Fixes F: drivers/gpio/gpio-thunderx.c -TI ADS131E0X ADC SERIES DRIVER -M: Tomislav Denis -L: linux-iio@vger.kernel.org -S: Maintained -F: Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml -F: drivers/iio/adc/ti-ads131e08.c - TI AM437X VPFE DRIVER M: "Lad, Prabhakar" L: linux-media@vger.kernel.org diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 35798712f811..ffac66db7ac9 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -541,6 +541,19 @@ config MMA9553 To compile this driver as a module, choose M here: the module will be called mma9553. +config MSA311 + tristate "MEMSensing Digital 3-Axis Accelerometer Driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select REGMAP_I2C + help + Say yes here to build support for the MEMSensing MSA311 + accelerometer driver. + + To compile this driver as a module, choose M here: the module will be + called msa311. + config MXC4005 tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver" depends on I2C diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 4d8792668838..5e45b5fa5ab5 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -58,6 +58,8 @@ obj-$(CONFIG_MMA9551_CORE) += mma9551_core.o obj-$(CONFIG_MMA9551) += mma9551.o obj-$(CONFIG_MMA9553) += mma9553.o +obj-$(CONFIG_MSA311) += msa311.o + obj-$(CONFIG_MXC4005) += mxc4005.o obj-$(CONFIG_MXC6255) += mxc6255.o diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c index 370bfec1275a..1919e0089c11 100644 --- a/drivers/iio/accel/adxl345_core.c +++ b/drivers/iio/accel/adxl345_core.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include @@ -32,7 +33,6 @@ #define ADXL345_BW_RATE GENMASK(3, 0) #define ADXL345_BASE_RATE_NANO_HZ 97656250LL -#define NHZ_PER_HZ 1000000000LL #define ADXL345_POWER_CTL_MEASURE BIT(3) #define ADXL345_POWER_CTL_STANDBY 0x00 @@ -139,7 +139,7 @@ static int adxl345_read_raw(struct iio_dev *indio_dev, samp_freq_nhz = ADXL345_BASE_RATE_NANO_HZ << (regval & ADXL345_BW_RATE); - *val = div_s64_rem(samp_freq_nhz, NHZ_PER_HZ, val2); + *val = div_s64_rem(samp_freq_nhz, NANOHZ_PER_HZ, val2); return IIO_VAL_INT_PLUS_NANO; } @@ -164,7 +164,8 @@ static int adxl345_write_raw(struct iio_dev *indio_dev, ADXL345_REG_OFS_AXIS(chan->address), val / 4); case IIO_CHAN_INFO_SAMP_FREQ: - n = div_s64(val * NHZ_PER_HZ + val2, ADXL345_BASE_RATE_NANO_HZ); + n = div_s64(val * NANOHZ_PER_HZ + val2, + ADXL345_BASE_RATE_NANO_HZ); return regmap_update_bits(data->regmap, ADXL345_REG_BW_RATE, ADXL345_BW_RATE, diff --git a/drivers/iio/accel/bma400.h b/drivers/iio/accel/bma400.h index e8f802a82300..36edbaff4f7f 100644 --- a/drivers/iio/accel/bma400.h +++ b/drivers/iio/accel/bma400.h @@ -40,6 +40,7 @@ #define BMA400_INT_STAT1_REG 0x0f #define BMA400_INT_STAT2_REG 0x10 #define BMA400_INT12_MAP_REG 0x23 +#define BMA400_INT_ENG_OVRUN_MSK BIT(4) /* Temperature register */ #define BMA400_TEMP_DATA_REG 0x11 @@ -105,6 +106,19 @@ #define BMA400_INT_GEN2_MSK BIT(3) #define BMA400_GEN_HYST_MSK GENMASK(1, 0) +/* TAP config registers */ +#define BMA400_TAP_CONFIG 0x57 +#define BMA400_TAP_CONFIG1 0x58 +#define BMA400_S_TAP_MSK BIT(2) +#define BMA400_D_TAP_MSK BIT(3) +#define BMA400_INT_S_TAP_MSK BIT(10) +#define BMA400_INT_D_TAP_MSK BIT(11) +#define BMA400_TAP_SEN_MSK GENMASK(2, 0) +#define BMA400_TAP_TICSTH_MSK GENMASK(1, 0) +#define BMA400_TAP_QUIET_MSK GENMASK(3, 2) +#define BMA400_TAP_QUIETDT_MSK GENMASK(5, 4) +#define BMA400_TAP_TIM_LIST_LEN 4 + /* * BMA400_SCALE_MIN macro value represents m/s^2 for 1 LSB before * converting to micro values for +-2g range. diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c index c31bdd9b168e..eceb1f8d338d 100644 --- a/drivers/iio/accel/bma400_core.c +++ b/drivers/iio/accel/bma400_core.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -47,6 +48,27 @@ static int bma400_sample_freqs[14]; static const int bma400_osr_range[] = { 0, 1, 3 }; +static int tap_reset_timeout[BMA400_TAP_TIM_LIST_LEN] = { + 300000, + 400000, + 500000, + 600000 +}; + +static int tap_max2min_time[BMA400_TAP_TIM_LIST_LEN] = { + 30000, + 45000, + 60000, + 90000 +}; + +static int double_tap2_min_delay[BMA400_TAP_TIM_LIST_LEN] = { + 20000, + 40000, + 60000, + 80000 +}; + /* See the ACC_CONFIG0 section of the datasheet */ enum bma400_power_mode { POWER_MODE_SLEEP = 0x00, @@ -88,6 +110,7 @@ struct bma400_data { bool step_event_en; bool activity_event_en; unsigned int generic_event_en; + unsigned int tap_event_en_bitmask; /* Correct time stamp alignment */ struct { __le16 buff[3]; @@ -216,6 +239,115 @@ static const struct iio_event_spec bma400_accel_event[] = { BIT(IIO_EV_INFO_HYSTERESIS) | BIT(IIO_EV_INFO_ENABLE), }, + { + .type = IIO_EV_TYPE_GESTURE, + .dir = IIO_EV_DIR_SINGLETAP, + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_ENABLE) | + BIT(IIO_EV_INFO_RESET_TIMEOUT), + }, + { + .type = IIO_EV_TYPE_GESTURE, + .dir = IIO_EV_DIR_DOUBLETAP, + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_ENABLE) | + BIT(IIO_EV_INFO_RESET_TIMEOUT) | + BIT(IIO_EV_INFO_TAP2_MIN_DELAY), + }, +}; + +static int usec_to_tapreg_raw(int usec, const int *time_list) +{ + int index; + + for (index = 0; index < BMA400_TAP_TIM_LIST_LEN; index++) { + if (usec == time_list[index]) + return index; + } + return -EINVAL; +} + +static ssize_t in_accel_gesture_tap_maxtomin_time_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bma400_data *data = iio_priv(indio_dev); + int ret, reg_val, raw, vals[2]; + + ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1, ®_val); + if (ret) + return ret; + + raw = FIELD_GET(BMA400_TAP_TICSTH_MSK, reg_val); + vals[0] = 0; + vals[1] = tap_max2min_time[raw]; + + return iio_format_value(buf, IIO_VAL_INT_PLUS_MICRO, 2, vals); +} + +static ssize_t in_accel_gesture_tap_maxtomin_time_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bma400_data *data = iio_priv(indio_dev); + int ret, val_int, val_fract, raw; + + ret = iio_str_to_fixpoint(buf, 100000, &val_int, &val_fract); + if (ret) + return ret; + + raw = usec_to_tapreg_raw(val_fract, tap_max2min_time); + if (raw < 0) + return -EINVAL; + + ret = regmap_update_bits(data->regmap, BMA400_TAP_CONFIG1, + BMA400_TAP_TICSTH_MSK, + FIELD_PREP(BMA400_TAP_TICSTH_MSK, raw)); + if (ret) + return ret; + + return len; +} + +static IIO_DEVICE_ATTR_RW(in_accel_gesture_tap_maxtomin_time, 0); + +/* + * Tap interrupts works with 200 Hz input data rate and the time based tap + * controls are in the terms of data samples so the below calculation is + * used to convert the configuration values into seconds. + * e.g.: + * 60 data samples * 0.005 ms = 0.3 seconds. + * 80 data samples * 0.005 ms = 0.4 seconds. + */ + +/* quiet configuration values in seconds */ +static IIO_CONST_ATTR(in_accel_gesture_tap_reset_timeout_available, + "0.3 0.4 0.5 0.6"); + +/* tics_th configuration values in seconds */ +static IIO_CONST_ATTR(in_accel_gesture_tap_maxtomin_time_available, + "0.03 0.045 0.06 0.09"); + +/* quiet_dt configuration values in seconds */ +static IIO_CONST_ATTR(in_accel_gesture_doubletap_tap2_min_delay_available, + "0.02 0.04 0.06 0.08"); + +/* List of sensitivity values available to configure tap interrupts */ +static IIO_CONST_ATTR(in_accel_gesture_tap_value_available, "0 1 2 3 4 5 6 7"); + +static struct attribute *bma400_event_attributes[] = { + &iio_const_attr_in_accel_gesture_tap_value_available.dev_attr.attr, + &iio_const_attr_in_accel_gesture_tap_reset_timeout_available.dev_attr.attr, + &iio_const_attr_in_accel_gesture_tap_maxtomin_time_available.dev_attr.attr, + &iio_const_attr_in_accel_gesture_doubletap_tap2_min_delay_available.dev_attr.attr, + &iio_dev_attr_in_accel_gesture_tap_maxtomin_time.dev_attr.attr, + NULL +}; + +static const struct attribute_group bma400_event_attribute_group = { + .attrs = bma400_event_attributes, }; #define BMA400_ACC_CHANNEL(_index, _axis) { \ @@ -1012,6 +1144,12 @@ static int bma400_read_event_config(struct iio_dev *indio_dev, case IIO_EV_DIR_FALLING: return FIELD_GET(BMA400_INT_GEN2_MSK, data->generic_event_en); + case IIO_EV_DIR_SINGLETAP: + return FIELD_GET(BMA400_S_TAP_MSK, + data->tap_event_en_bitmask); + case IIO_EV_DIR_DOUBLETAP: + return FIELD_GET(BMA400_D_TAP_MSK, + data->tap_event_en_bitmask); default: return -EINVAL; } @@ -1101,6 +1239,80 @@ static int bma400_activity_event_en(struct bma400_data *data, return 0; } +static int bma400_tap_event_en(struct bma400_data *data, + enum iio_event_direction dir, int state) +{ + unsigned int mask, field_value; + int ret; + + /* + * Tap interrupts can be configured only in normal mode. + * See table in section 4.3 "Power modes - performance modes" of + * datasheet v1.2. + */ + if (data->power_mode != POWER_MODE_NORMAL) + return -EINVAL; + + /* + * Tap interrupts are operating with a data rate of 200Hz. + * See section 4.7 "Tap sensing interrupt" in datasheet v1.2. + */ + if (data->sample_freq.hz != 200 && state) { + dev_err(data->dev, "Invalid data rate for tap interrupts.\n"); + return -EINVAL; + } + + ret = regmap_update_bits(data->regmap, BMA400_INT12_MAP_REG, + BMA400_S_TAP_MSK, + FIELD_PREP(BMA400_S_TAP_MSK, state)); + if (ret) + return ret; + + switch (dir) { + case IIO_EV_DIR_SINGLETAP: + mask = BMA400_S_TAP_MSK; + set_mask_bits(&field_value, BMA400_S_TAP_MSK, + FIELD_PREP(BMA400_S_TAP_MSK, state)); + break; + case IIO_EV_DIR_DOUBLETAP: + mask = BMA400_D_TAP_MSK; + set_mask_bits(&field_value, BMA400_D_TAP_MSK, + FIELD_PREP(BMA400_D_TAP_MSK, state)); + break; + default: + return -EINVAL; + } + + ret = regmap_update_bits(data->regmap, BMA400_INT_CONFIG1_REG, mask, + field_value); + if (ret) + return ret; + + set_mask_bits(&data->tap_event_en_bitmask, mask, field_value); + + return 0; +} + +static int bma400_disable_adv_interrupt(struct bma400_data *data) +{ + int ret; + + ret = regmap_write(data->regmap, BMA400_INT_CONFIG0_REG, 0); + if (ret) + return ret; + + ret = regmap_write(data->regmap, BMA400_INT_CONFIG1_REG, 0); + if (ret) + return ret; + + data->tap_event_en_bitmask = 0; + data->generic_event_en = 0; + data->step_event_en = false; + data->activity_event_en = false; + + return 0; +} + static int bma400_write_event_config(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, @@ -1111,10 +1323,20 @@ static int bma400_write_event_config(struct iio_dev *indio_dev, switch (chan->type) { case IIO_ACCEL: - mutex_lock(&data->mutex); - ret = bma400_activity_event_en(data, dir, state); - mutex_unlock(&data->mutex); - return ret; + switch (type) { + case IIO_EV_TYPE_MAG: + mutex_lock(&data->mutex); + ret = bma400_activity_event_en(data, dir, state); + mutex_unlock(&data->mutex); + return ret; + case IIO_EV_TYPE_GESTURE: + mutex_lock(&data->mutex); + ret = bma400_tap_event_en(data, dir, state); + mutex_unlock(&data->mutex); + return ret; + default: + return -EINVAL; + } case IIO_STEPS: mutex_lock(&data->mutex); ret = bma400_steps_event_enable(data, state); @@ -1157,10 +1379,13 @@ static int bma400_read_event_value(struct iio_dev *indio_dev, int *val, int *val2) { struct bma400_data *data = iio_priv(indio_dev); - int ret, reg; + int ret, reg, reg_val, raw; - switch (chan->type) { - case IIO_ACCEL: + if (chan->type != IIO_ACCEL) + return -EINVAL; + + switch (type) { + case IIO_EV_TYPE_MAG: reg = get_gen_config_reg(dir); if (reg < 0) return -EINVAL; @@ -1196,6 +1421,39 @@ static int bma400_read_event_value(struct iio_dev *indio_dev, default: return -EINVAL; } + case IIO_EV_TYPE_GESTURE: + switch (info) { + case IIO_EV_INFO_VALUE: + ret = regmap_read(data->regmap, BMA400_TAP_CONFIG, + ®_val); + if (ret) + return ret; + + *val = FIELD_GET(BMA400_TAP_SEN_MSK, reg_val); + return IIO_VAL_INT; + case IIO_EV_INFO_RESET_TIMEOUT: + ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1, + ®_val); + if (ret) + return ret; + + raw = FIELD_GET(BMA400_TAP_QUIET_MSK, reg_val); + *val = 0; + *val2 = tap_reset_timeout[raw]; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_EV_INFO_TAP2_MIN_DELAY: + ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1, + ®_val); + if (ret) + return ret; + + raw = FIELD_GET(BMA400_TAP_QUIETDT_MSK, reg_val); + *val = 0; + *val2 = double_tap2_min_delay[raw]; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } default: return -EINVAL; } @@ -1209,10 +1467,13 @@ static int bma400_write_event_value(struct iio_dev *indio_dev, int val, int val2) { struct bma400_data *data = iio_priv(indio_dev); - int reg, ret; + int reg, ret, raw; - switch (chan->type) { - case IIO_ACCEL: + if (chan->type != IIO_ACCEL) + return -EINVAL; + + switch (type) { + case IIO_EV_TYPE_MAG: reg = get_gen_config_reg(dir); if (reg < 0) return -EINVAL; @@ -1248,6 +1509,40 @@ static int bma400_write_event_value(struct iio_dev *indio_dev, default: return -EINVAL; } + case IIO_EV_TYPE_GESTURE: + switch (info) { + case IIO_EV_INFO_VALUE: + if (val < 0 || val > 7) + return -EINVAL; + + return regmap_update_bits(data->regmap, + BMA400_TAP_CONFIG, + BMA400_TAP_SEN_MSK, + FIELD_PREP(BMA400_TAP_SEN_MSK, + val)); + case IIO_EV_INFO_RESET_TIMEOUT: + raw = usec_to_tapreg_raw(val2, tap_reset_timeout); + if (raw < 0) + return -EINVAL; + + return regmap_update_bits(data->regmap, + BMA400_TAP_CONFIG1, + BMA400_TAP_QUIET_MSK, + FIELD_PREP(BMA400_TAP_QUIET_MSK, + raw)); + case IIO_EV_INFO_TAP2_MIN_DELAY: + raw = usec_to_tapreg_raw(val2, double_tap2_min_delay); + if (raw < 0) + return -EINVAL; + + return regmap_update_bits(data->regmap, + BMA400_TAP_CONFIG1, + BMA400_TAP_QUIETDT_MSK, + FIELD_PREP(BMA400_TAP_QUIETDT_MSK, + raw)); + default: + return -EINVAL; + } default: return -EINVAL; } @@ -1287,6 +1582,7 @@ static const struct iio_info bma400_info = { .write_event_config = bma400_write_event_config, .write_event_value = bma400_write_event_value, .read_event_value = bma400_read_event_value, + .event_attrs = &bma400_event_attribute_group, }; static const struct iio_trigger_ops bma400_trigger_ops = { @@ -1350,6 +1646,32 @@ static irqreturn_t bma400_interrupt(int irq, void *private) if (ret || !data->status) goto unlock_err; + /* + * Disable all advance interrupts if interrupt engine overrun occurs. + * See section 4.7 "Interrupt engine overrun" in datasheet v1.2. + */ + if (FIELD_GET(BMA400_INT_ENG_OVRUN_MSK, le16_to_cpu(data->status))) { + bma400_disable_adv_interrupt(data); + dev_err(data->dev, "Interrupt engine overrun\n"); + goto unlock_err; + } + + if (FIELD_GET(BMA400_INT_S_TAP_MSK, le16_to_cpu(data->status))) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, + IIO_MOD_X_OR_Y_OR_Z, + IIO_EV_TYPE_GESTURE, + IIO_EV_DIR_SINGLETAP), + timestamp); + + if (FIELD_GET(BMA400_INT_D_TAP_MSK, le16_to_cpu(data->status))) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, + IIO_MOD_X_OR_Y_OR_Z, + IIO_EV_TYPE_GESTURE, + IIO_EV_DIR_DOUBLETAP), + timestamp); + if (FIELD_GET(BMA400_INT_GEN1_MSK, le16_to_cpu(data->status))) ev_dir = IIO_EV_DIR_RISING; @@ -1467,5 +1789,6 @@ int bma400_probe(struct device *dev, struct regmap *regmap, int irq, EXPORT_SYMBOL_NS(bma400_probe, IIO_BMA400); MODULE_AUTHOR("Dan Robertson "); +MODULE_AUTHOR("Jagath Jog J "); MODULE_DESCRIPTION("Bosch BMA400 triaxial acceleration sensor core"); MODULE_LICENSE("GPL"); diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c index 748b35c2f0c3..b073ab12e6a4 100644 --- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -1064,7 +1064,7 @@ static int kxcjk1013_write_event_config(struct iio_dev *indio_dev, /* * We will expect the enable and disable to do operation in - * in reverse order. This will happen here anyway as our + * reverse order. This will happen here anyway as our * resume operation uses sync mode runtime pm calls, the * suspend operation will be delayed by autosuspend delay * So the disable operation will still happen in reverse of diff --git a/drivers/iio/accel/msa311.c b/drivers/iio/accel/msa311.c new file mode 100644 index 000000000000..2fded3759171 --- /dev/null +++ b/drivers/iio/accel/msa311.c @@ -0,0 +1,1321 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MEMSensing digital 3-Axis accelerometer + * + * MSA311 is a tri-axial, low-g accelerometer with I2C digital output for + * sensitivity consumer applications. It has dynamic user-selectable full + * scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements + * with output data rates from 1Hz to 1000Hz. + * + * MSA311 is available in an ultra small (2mm x 2mm, height 0.95mm) LGA package + * and is guaranteed to operate over -40C to +85C. + * + * This driver supports following MSA311 features: + * - IIO interface + * - Different power modes: NORMAL, SUSPEND + * - ODR (Output Data Rate) selection + * - Scale selection + * - IIO triggered buffer + * - NEW_DATA interrupt + trigger + * + * Below features to be done: + * - Motion Events: ACTIVE, TAP, ORIENT, FREEFALL + * - Low Power mode + * + * Copyright (c) 2022, SberDevices. All Rights Reserved. + * + * Author: Dmitry Rokosov + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define MSA311_SOFT_RESET_REG 0x00 +#define MSA311_PARTID_REG 0x01 +#define MSA311_ACC_X_REG 0x02 +#define MSA311_ACC_Y_REG 0x04 +#define MSA311_ACC_Z_REG 0x06 +#define MSA311_MOTION_INT_REG 0x09 +#define MSA311_DATA_INT_REG 0x0A +#define MSA311_TAP_ACTIVE_STS_REG 0x0B +#define MSA311_ORIENT_STS_REG 0x0C +#define MSA311_RANGE_REG 0x0F +#define MSA311_ODR_REG 0x10 +#define MSA311_PWR_MODE_REG 0x11 +#define MSA311_SWAP_POLARITY_REG 0x12 +#define MSA311_INT_SET_0_REG 0x16 +#define MSA311_INT_SET_1_REG 0x17 +#define MSA311_INT_MAP_0_REG 0x19 +#define MSA311_INT_MAP_1_REG 0x1A +#define MSA311_INT_CONFIG_REG 0x20 +#define MSA311_INT_LATCH_REG 0x21 +#define MSA311_FREEFALL_DUR_REG 0x22 +#define MSA311_FREEFALL_TH_REG 0x23 +#define MSA311_FREEFALL_HY_REG 0x24 +#define MSA311_ACTIVE_DUR_REG 0x27 +#define MSA311_ACTIVE_TH_REG 0x28 +#define MSA311_TAP_DUR_REG 0x2A +#define MSA311_TAP_TH_REG 0x2B +#define MSA311_ORIENT_HY_REG 0x2C +#define MSA311_Z_BLOCK_REG 0x2D +#define MSA311_OFFSET_X_REG 0x38 +#define MSA311_OFFSET_Y_REG 0x39 +#define MSA311_OFFSET_Z_REG 0x3A + +enum msa311_fields { + /* Soft_Reset */ + F_SOFT_RESET_I2C, F_SOFT_RESET_SPI, + /* Motion_Interrupt */ + F_ORIENT_INT, F_S_TAP_INT, F_D_TAP_INT, F_ACTIVE_INT, F_FREEFALL_INT, + /* Data_Interrupt */ + F_NEW_DATA_INT, + /* Tap_Active_Status */ + F_TAP_SIGN, F_TAP_FIRST_X, F_TAP_FIRST_Y, F_TAP_FIRST_Z, F_ACTV_SIGN, + F_ACTV_FIRST_X, F_ACTV_FIRST_Y, F_ACTV_FIRST_Z, + /* Orientation_Status */ + F_ORIENT_Z, F_ORIENT_X_Y, + /* Range */ + F_FS, + /* ODR */ + F_X_AXIS_DIS, F_Y_AXIS_DIS, F_Z_AXIS_DIS, F_ODR, + /* Power Mode/Bandwidth */ + F_PWR_MODE, F_LOW_POWER_BW, + /* Swap_Polarity */ + F_X_POLARITY, F_Y_POLARITY, F_Z_POLARITY, F_X_Y_SWAP, + /* Int_Set_0 */ + F_ORIENT_INT_EN, F_S_TAP_INT_EN, F_D_TAP_INT_EN, F_ACTIVE_INT_EN_Z, + F_ACTIVE_INT_EN_Y, F_ACTIVE_INT_EN_X, + /* Int_Set_1 */ + F_NEW_DATA_INT_EN, F_FREEFALL_INT_EN, + /* Int_Map_0 */ + F_INT1_ORIENT, F_INT1_S_TAP, F_INT1_D_TAP, F_INT1_ACTIVE, + F_INT1_FREEFALL, + /* Int_Map_1 */ + F_INT1_NEW_DATA, + /* Int_Config */ + F_INT1_OD, F_INT1_LVL, + /* Int_Latch */ + F_RESET_INT, F_LATCH_INT, + /* Freefall_Hy */ + F_FREEFALL_MODE, F_FREEFALL_HY, + /* Active_Dur */ + F_ACTIVE_DUR, + /* Tap_Dur */ + F_TAP_QUIET, F_TAP_SHOCK, F_TAP_DUR, + /* Tap_Th */ + F_TAP_TH, + /* Orient_Hy */ + F_ORIENT_HYST, F_ORIENT_BLOCKING, F_ORIENT_MODE, + /* Z_Block */ + F_Z_BLOCKING, + /* End of register map */ + F_MAX_FIELDS, +}; + +static const struct reg_field msa311_reg_fields[] = { + /* Soft_Reset */ + [F_SOFT_RESET_I2C] = REG_FIELD(MSA311_SOFT_RESET_REG, 2, 2), + [F_SOFT_RESET_SPI] = REG_FIELD(MSA311_SOFT_RESET_REG, 5, 5), + /* Motion_Interrupt */ + [F_ORIENT_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 6, 6), + [F_S_TAP_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 5, 5), + [F_D_TAP_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 4, 4), + [F_ACTIVE_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 2, 2), + [F_FREEFALL_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 0, 0), + /* Data_Interrupt */ + [F_NEW_DATA_INT] = REG_FIELD(MSA311_DATA_INT_REG, 0, 0), + /* Tap_Active_Status */ + [F_TAP_SIGN] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 7, 7), + [F_TAP_FIRST_X] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 6, 6), + [F_TAP_FIRST_Y] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 5, 5), + [F_TAP_FIRST_Z] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 4, 4), + [F_ACTV_SIGN] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 3, 3), + [F_ACTV_FIRST_X] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 2, 2), + [F_ACTV_FIRST_Y] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 1, 1), + [F_ACTV_FIRST_Z] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 0, 0), + /* Orientation_Status */ + [F_ORIENT_Z] = REG_FIELD(MSA311_ORIENT_STS_REG, 6, 6), + [F_ORIENT_X_Y] = REG_FIELD(MSA311_ORIENT_STS_REG, 4, 5), + /* Range */ + [F_FS] = REG_FIELD(MSA311_RANGE_REG, 0, 1), + /* ODR */ + [F_X_AXIS_DIS] = REG_FIELD(MSA311_ODR_REG, 7, 7), + [F_Y_AXIS_DIS] = REG_FIELD(MSA311_ODR_REG, 6, 6), + [F_Z_AXIS_DIS] = REG_FIELD(MSA311_ODR_REG, 5, 5), + [F_ODR] = REG_FIELD(MSA311_ODR_REG, 0, 3), + /* Power Mode/Bandwidth */ + [F_PWR_MODE] = REG_FIELD(MSA311_PWR_MODE_REG, 6, 7), + [F_LOW_POWER_BW] = REG_FIELD(MSA311_PWR_MODE_REG, 1, 4), + /* Swap_Polarity */ + [F_X_POLARITY] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 3, 3), + [F_Y_POLARITY] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 2, 2), + [F_Z_POLARITY] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 1, 1), + [F_X_Y_SWAP] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 0, 0), + /* Int_Set_0 */ + [F_ORIENT_INT_EN] = REG_FIELD(MSA311_INT_SET_0_REG, 6, 6), + [F_S_TAP_INT_EN] = REG_FIELD(MSA311_INT_SET_0_REG, 5, 5), + [F_D_TAP_INT_EN] = REG_FIELD(MSA311_INT_SET_0_REG, 4, 4), + [F_ACTIVE_INT_EN_Z] = REG_FIELD(MSA311_INT_SET_0_REG, 2, 2), + [F_ACTIVE_INT_EN_Y] = REG_FIELD(MSA311_INT_SET_0_REG, 1, 1), + [F_ACTIVE_INT_EN_X] = REG_FIELD(MSA311_INT_SET_0_REG, 0, 0), + /* Int_Set_1 */ + [F_NEW_DATA_INT_EN] = REG_FIELD(MSA311_INT_SET_1_REG, 4, 4), + [F_FREEFALL_INT_EN] = REG_FIELD(MSA311_INT_SET_1_REG, 3, 3), + /* Int_Map_0 */ + [F_INT1_ORIENT] = REG_FIELD(MSA311_INT_MAP_0_REG, 6, 6), + [F_INT1_S_TAP] = REG_FIELD(MSA311_INT_MAP_0_REG, 5, 5), + [F_INT1_D_TAP] = REG_FIELD(MSA311_INT_MAP_0_REG, 4, 4), + [F_INT1_ACTIVE] = REG_FIELD(MSA311_INT_MAP_0_REG, 2, 2), + [F_INT1_FREEFALL] = REG_FIELD(MSA311_INT_MAP_0_REG, 0, 0), + /* Int_Map_1 */ + [F_INT1_NEW_DATA] = REG_FIELD(MSA311_INT_MAP_1_REG, 0, 0), + /* Int_Config */ + [F_INT1_OD] = REG_FIELD(MSA311_INT_CONFIG_REG, 1, 1), + [F_INT1_LVL] = REG_FIELD(MSA311_INT_CONFIG_REG, 0, 0), + /* Int_Latch */ + [F_RESET_INT] = REG_FIELD(MSA311_INT_LATCH_REG, 7, 7), + [F_LATCH_INT] = REG_FIELD(MSA311_INT_LATCH_REG, 0, 3), + /* Freefall_Hy */ + [F_FREEFALL_MODE] = REG_FIELD(MSA311_FREEFALL_HY_REG, 2, 2), + [F_FREEFALL_HY] = REG_FIELD(MSA311_FREEFALL_HY_REG, 0, 1), + /* Active_Dur */ + [F_ACTIVE_DUR] = REG_FIELD(MSA311_ACTIVE_DUR_REG, 0, 1), + /* Tap_Dur */ + [F_TAP_QUIET] = REG_FIELD(MSA311_TAP_DUR_REG, 7, 7), + [F_TAP_SHOCK] = REG_FIELD(MSA311_TAP_DUR_REG, 6, 6), + [F_TAP_DUR] = REG_FIELD(MSA311_TAP_DUR_REG, 0, 2), + /* Tap_Th */ + [F_TAP_TH] = REG_FIELD(MSA311_TAP_TH_REG, 0, 4), + /* Orient_Hy */ + [F_ORIENT_HYST] = REG_FIELD(MSA311_ORIENT_HY_REG, 4, 6), + [F_ORIENT_BLOCKING] = REG_FIELD(MSA311_ORIENT_HY_REG, 2, 3), + [F_ORIENT_MODE] = REG_FIELD(MSA311_ORIENT_HY_REG, 0, 1), + /* Z_Block */ + [F_Z_BLOCKING] = REG_FIELD(MSA311_Z_BLOCK_REG, 0, 3), +}; + +#define MSA311_WHO_AM_I 0x13 + +/* + * Possible Full Scale ranges + * + * Axis data is 12-bit signed value, so + * + * fs0 = (2 + 2) * 9.81 / (2^11) = 0.009580 + * fs1 = (4 + 4) * 9.81 / (2^11) = 0.019160 + * fs2 = (8 + 8) * 9.81 / (2^11) = 0.038320 + * fs3 = (16 + 16) * 9.81 / (2^11) = 0.076641 + */ +enum { + MSA311_FS_2G, + MSA311_FS_4G, + MSA311_FS_8G, + MSA311_FS_16G, +}; + +struct iio_decimal_fract { + int integral; + int microfract; +}; + +static const struct iio_decimal_fract msa311_fs_table[] = { + {0, 9580}, {0, 19160}, {0, 38320}, {0, 76641}, +}; + +/* Possible Output Data Rate values */ +enum { + MSA311_ODR_1_HZ, + MSA311_ODR_1_95_HZ, + MSA311_ODR_3_9_HZ, + MSA311_ODR_7_81_HZ, + MSA311_ODR_15_63_HZ, + MSA311_ODR_31_25_HZ, + MSA311_ODR_62_5_HZ, + MSA311_ODR_125_HZ, + MSA311_ODR_250_HZ, + MSA311_ODR_500_HZ, + MSA311_ODR_1000_HZ, +}; + +static const struct iio_decimal_fract msa311_odr_table[] = { + {1, 0}, {1, 950000}, {3, 900000}, {7, 810000}, {15, 630000}, + {31, 250000}, {62, 500000}, {125, 0}, {250, 0}, {500, 0}, {1000, 0}, +}; + +/* All supported power modes */ +#define MSA311_PWR_MODE_NORMAL 0b00 +#define MSA311_PWR_MODE_LOW 0b01 +#define MSA311_PWR_MODE_UNKNOWN 0b10 +#define MSA311_PWR_MODE_SUSPEND 0b11 +static const char * const msa311_pwr_modes[] = { + [MSA311_PWR_MODE_NORMAL] = "normal", + [MSA311_PWR_MODE_LOW] = "low", + [MSA311_PWR_MODE_UNKNOWN] = "unknown", + [MSA311_PWR_MODE_SUSPEND] = "suspend", +}; + +/* Autosuspend delay */ +#define MSA311_PWR_SLEEP_DELAY_MS 2000 + +/* Possible INT1 types and levels */ +enum { + MSA311_INT1_OD_PUSH_PULL, + MSA311_INT1_OD_OPEN_DRAIN, +}; + +enum { + MSA311_INT1_LVL_LOW, + MSA311_INT1_LVL_HIGH, +}; + +/* Latch INT modes */ +#define MSA311_LATCH_INT_NOT_LATCHED 0b0000 +#define MSA311_LATCH_INT_250MS 0b0001 +#define MSA311_LATCH_INT_500MS 0b0010 +#define MSA311_LATCH_INT_1S 0b0011 +#define MSA311_LATCH_INT_2S 0b0100 +#define MSA311_LATCH_INT_4S 0b0101 +#define MSA311_LATCH_INT_8S 0b0110 +#define MSA311_LATCH_INT_1MS 0b1010 +#define MSA311_LATCH_INT_2MS 0b1011 +#define MSA311_LATCH_INT_25MS 0b1100 +#define MSA311_LATCH_INT_50MS 0b1101 +#define MSA311_LATCH_INT_100MS 0b1110 +#define MSA311_LATCH_INT_LATCHED 0b0111 + +static const struct regmap_range msa311_readonly_registers[] = { + regmap_reg_range(MSA311_PARTID_REG, MSA311_ORIENT_STS_REG), +}; + +static const struct regmap_access_table msa311_writeable_table = { + .no_ranges = msa311_readonly_registers, + .n_no_ranges = ARRAY_SIZE(msa311_readonly_registers), +}; + +static const struct regmap_range msa311_writeonly_registers[] = { + regmap_reg_range(MSA311_SOFT_RESET_REG, MSA311_SOFT_RESET_REG), +}; + +static const struct regmap_access_table msa311_readable_table = { + .no_ranges = msa311_writeonly_registers, + .n_no_ranges = ARRAY_SIZE(msa311_writeonly_registers), +}; + +static const struct regmap_range msa311_volatile_registers[] = { + regmap_reg_range(MSA311_ACC_X_REG, MSA311_ORIENT_STS_REG), +}; + +static const struct regmap_access_table msa311_volatile_table = { + .yes_ranges = msa311_volatile_registers, + .n_yes_ranges = ARRAY_SIZE(msa311_volatile_registers), +}; + +static const struct regmap_config msa311_regmap_config = { + .name = "msa311", + .reg_bits = 8, + .val_bits = 8, + .max_register = MSA311_OFFSET_Z_REG, + .wr_table = &msa311_writeable_table, + .rd_table = &msa311_readable_table, + .volatile_table = &msa311_volatile_table, + .cache_type = REGCACHE_RBTREE, +}; + +#define MSA311_GENMASK(field) ({ \ + typeof(&(msa311_reg_fields)[0]) _field; \ + _field = &msa311_reg_fields[(field)]; \ + GENMASK(_field->msb, _field->lsb); \ +}) + +/** + * struct msa311_priv - MSA311 internal private state + * @regs: Underlying I2C bus adapter used to abstract slave + * register accesses + * @fields: Abstract objects for each registers fields access + * @dev: Device handler associated with appropriate bus client + * @lock: Protects msa311 device state between setup and data access routines + * (power transitions, samp_freq/scale tune, retrieving axes data, etc) + * @chip_name: Chip name in the format "msa311-%02x" % partid + * @new_data_trig: Optional NEW_DATA interrupt driven trigger used + * to notify external consumers a new sample is ready + * @vdd: Optional external voltage regulator for the device power supply + */ +struct msa311_priv { + struct regmap *regs; + struct regmap_field *fields[F_MAX_FIELDS]; + + struct device *dev; + struct mutex lock; + char *chip_name; + + struct iio_trigger *new_data_trig; + struct regulator *vdd; +}; + +enum msa311_si { + MSA311_SI_X, + MSA311_SI_Y, + MSA311_SI_Z, + MSA311_SI_TIMESTAMP, +}; + +#define MSA311_ACCEL_CHANNEL(axis) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = MSA311_SI_##axis, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 12, \ + .storagebits = 16, \ + .shift = 4, \ + .endianness = IIO_LE, \ + }, \ + .datasheet_name = "ACC_"#axis, \ +} + +static const struct iio_chan_spec msa311_channels[] = { + MSA311_ACCEL_CHANNEL(X), + MSA311_ACCEL_CHANNEL(Y), + MSA311_ACCEL_CHANNEL(Z), + IIO_CHAN_SOFT_TIMESTAMP(MSA311_SI_TIMESTAMP), +}; + +/** + * msa311_get_odr() - Read Output Data Rate (ODR) value from MSA311 accel + * @msa311: MSA311 internal private state + * @odr: output ODR value + * + * This function should be called under msa311->lock. + * + * Return: 0 on success, -ERRNO in other failures + */ +static int msa311_get_odr(struct msa311_priv *msa311, unsigned int *odr) +{ + int err; + + err = regmap_field_read(msa311->fields[F_ODR], odr); + if (err) + return err; + + /* + * Filter the same 1000Hz ODR register values based on datasheet info. + * ODR can be equal to 1010-1111 for 1000Hz, but function returns 1010 + * all the time. + */ + if (*odr > MSA311_ODR_1000_HZ) + *odr = MSA311_ODR_1000_HZ; + + return 0; +} + +/** + * msa311_set_odr() - Setup Output Data Rate (ODR) value for MSA311 accel + * @msa311: MSA311 internal private state + * @odr: requested ODR value + * + * This function should be called under msa311->lock. Possible ODR values: + * - 1Hz (not available in normal mode) + * - 1.95Hz (not available in normal mode) + * - 3.9Hz + * - 7.81Hz + * - 15.63Hz + * - 31.25Hz + * - 62.5Hz + * - 125Hz + * - 250Hz + * - 500Hz + * - 1000Hz + * + * Return: 0 on success, -EINVAL for bad ODR value in the certain power mode, + * -ERRNO in other failures + */ +static int msa311_set_odr(struct msa311_priv *msa311, unsigned int odr) +{ + struct device *dev = msa311->dev; + unsigned int pwr_mode; + bool good_odr; + int err; + + err = regmap_field_read(msa311->fields[F_PWR_MODE], &pwr_mode); + if (err) + return err; + + /* Filter bad ODR values */ + if (pwr_mode == MSA311_PWR_MODE_NORMAL) + good_odr = (odr > MSA311_ODR_1_95_HZ); + else + good_odr = false; + + if (!good_odr) { + dev_err(dev, + "can't set odr %u.%06uHz, not available in %s mode\n", + msa311_odr_table[odr].integral, + msa311_odr_table[odr].microfract, + msa311_pwr_modes[pwr_mode]); + return -EINVAL; + } + + return regmap_field_write(msa311->fields[F_ODR], odr); +} + +/** + * msa311_wait_for_next_data() - Wait next accel data available after resume + * @msa311: MSA311 internal private state + * + * Return: 0 on success, -EINTR if msleep() was interrupted, + * -ERRNO in other failures + */ +static int msa311_wait_for_next_data(struct msa311_priv *msa311) +{ + static const unsigned int unintr_thresh_ms = 20; + struct device *dev = msa311->dev; + unsigned long freq_uhz; + unsigned long wait_ms; + unsigned int odr; + int err; + + err = msa311_get_odr(msa311, &odr); + if (err) { + dev_err(dev, "can't get actual frequency (%pe)\n", + ERR_PTR(err)); + return err; + } + + /* + * After msa311 resuming is done, we need to wait for data + * to be refreshed by accel logic. + * A certain timeout is calculated based on the current ODR value. + * If requested timeout isn't so long (let's assume 20ms), + * we can wait for next data in uninterruptible sleep. + */ + freq_uhz = msa311_odr_table[odr].integral * MICROHZ_PER_HZ + + msa311_odr_table[odr].microfract; + wait_ms = (MICROHZ_PER_HZ / freq_uhz) * MSEC_PER_SEC; + + if (wait_ms < unintr_thresh_ms) + usleep_range(wait_ms * USEC_PER_MSEC, + unintr_thresh_ms * USEC_PER_MSEC); + else if (msleep_interruptible(wait_ms)) + return -EINTR; + + return 0; +} + +/** + * msa311_set_pwr_mode() - Install certain MSA311 power mode + * @msa311: MSA311 internal private state + * @mode: Power mode can be equal to NORMAL or SUSPEND + * + * This function should be called under msa311->lock. + * + * Return: 0 on success, -ERRNO on failure + */ +static int msa311_set_pwr_mode(struct msa311_priv *msa311, unsigned int mode) +{ + struct device *dev = msa311->dev; + unsigned int prev_mode; + int err; + + if (mode >= ARRAY_SIZE(msa311_pwr_modes)) + return -EINVAL; + + dev_dbg(dev, "transition to %s mode\n", msa311_pwr_modes[mode]); + + err = regmap_field_read(msa311->fields[F_PWR_MODE], &prev_mode); + if (err) + return err; + + err = regmap_field_write(msa311->fields[F_PWR_MODE], mode); + if (err) + return err; + + /* Wait actual data if we wake up */ + if (prev_mode == MSA311_PWR_MODE_SUSPEND && + mode == MSA311_PWR_MODE_NORMAL) + return msa311_wait_for_next_data(msa311); + + return 0; +} + +/** + * msa311_get_axis() - Read MSA311 accel data for certain IIO channel axis spec + * @msa311: MSA311 internal private state + * @chan: IIO channel specification + * @axis: Output accel axis data for requested IIO channel spec + * + * This function should be called under msa311->lock. + * + * Return: 0 on success, -EINVAL for unknown IIO channel specification, + * -ERRNO in other failures + */ +static int msa311_get_axis(struct msa311_priv *msa311, + const struct iio_chan_spec * const chan, + __le16 *axis) +{ + struct device *dev = msa311->dev; + unsigned int axis_reg; + + if (chan->scan_index < MSA311_SI_X || chan->scan_index > MSA311_SI_Z) { + dev_err(dev, "invalid scan_index value [%d]\n", + chan->scan_index); + return -EINVAL; + } + + /* Axes data layout has 2 byte gap for each axis starting from X axis */ + axis_reg = MSA311_ACC_X_REG + (chan->scan_index << 1); + + return regmap_bulk_read(msa311->regs, axis_reg, axis, sizeof(*axis)); +} + +static int msa311_read_raw_data(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + __le16 axis; + int err; + + err = pm_runtime_resume_and_get(dev); + if (err) + return err; + + err = iio_device_claim_direct_mode(indio_dev); + if (err) + return err; + + mutex_lock(&msa311->lock); + err = msa311_get_axis(msa311, chan, &axis); + mutex_unlock(&msa311->lock); + + iio_device_release_direct_mode(indio_dev); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + if (err) { + dev_err(dev, "can't get axis %s (%pe)\n", + chan->datasheet_name, ERR_PTR(err)); + return err; + } + + /* + * Axis data format is: + * ACC_X = (ACC_X_MSB[7:0] << 4) | ACC_X_LSB[7:4] + */ + *val = sign_extend32(le16_to_cpu(axis) >> chan->scan_type.shift, + chan->scan_type.realbits - 1); + + return IIO_VAL_INT; +} + +static int msa311_read_scale(struct iio_dev *indio_dev, int *val, int *val2) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + unsigned int fs; + int err; + + mutex_lock(&msa311->lock); + err = regmap_field_read(msa311->fields[F_FS], &fs); + mutex_unlock(&msa311->lock); + if (err) { + dev_err(dev, "can't get actual scale (%pe)\n", ERR_PTR(err)); + return err; + } + + *val = msa311_fs_table[fs].integral; + *val2 = msa311_fs_table[fs].microfract; + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int msa311_read_samp_freq(struct iio_dev *indio_dev, + int *val, int *val2) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + unsigned int odr; + int err; + + mutex_lock(&msa311->lock); + err = msa311_get_odr(msa311, &odr); + mutex_unlock(&msa311->lock); + if (err) { + dev_err(dev, "can't get actual frequency (%pe)\n", + ERR_PTR(err)); + return err; + } + + *val = msa311_odr_table[odr].integral; + *val2 = msa311_odr_table[odr].microfract; + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int msa311_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_RAW: + return msa311_read_raw_data(indio_dev, chan, val, val2); + + case IIO_CHAN_INFO_SCALE: + return msa311_read_scale(indio_dev, val, val2); + + case IIO_CHAN_INFO_SAMP_FREQ: + return msa311_read_samp_freq(indio_dev, val, val2); + + default: + return -EINVAL; + } +} + +static int msa311_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, + int *length, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + *vals = (int *)msa311_odr_table; + *type = IIO_VAL_INT_PLUS_MICRO; + /* ODR value has 2 ints (integer and fractional parts) */ + *length = ARRAY_SIZE(msa311_odr_table) * 2; + return IIO_AVAIL_LIST; + + case IIO_CHAN_INFO_SCALE: + *vals = (int *)msa311_fs_table; + *type = IIO_VAL_INT_PLUS_MICRO; + /* FS value has 2 ints (integer and fractional parts) */ + *length = ARRAY_SIZE(msa311_fs_table) * 2; + return IIO_AVAIL_LIST; + + default: + return -EINVAL; + } +} + +static int msa311_write_scale(struct iio_dev *indio_dev, int val, int val2) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + unsigned int fs; + int err; + + /* We do not have fs >= 1, so skip such values */ + if (val) + return 0; + + err = pm_runtime_resume_and_get(dev); + if (err) + return err; + + err = -EINVAL; + for (fs = 0; fs < ARRAY_SIZE(msa311_fs_table); fs++) + /* Do not check msa311_fs_table[fs].integral, it's always 0 */ + if (val2 == msa311_fs_table[fs].microfract) { + mutex_lock(&msa311->lock); + err = regmap_field_write(msa311->fields[F_FS], fs); + mutex_unlock(&msa311->lock); + break; + } + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + if (err) + dev_err(dev, "can't update scale (%pe)\n", ERR_PTR(err)); + + return err; +} + +static int msa311_write_samp_freq(struct iio_dev *indio_dev, int val, int val2) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + unsigned int odr; + int err; + + err = pm_runtime_resume_and_get(dev); + if (err) + return err; + + /* + * Sampling frequency changing is prohibited when buffer mode is + * enabled, because sometimes MSA311 chip returns outliers during + * frequency values growing up in the read operation moment. + */ + err = iio_device_claim_direct_mode(indio_dev); + if (err) + return err; + + err = -EINVAL; + for (odr = 0; odr < ARRAY_SIZE(msa311_odr_table); odr++) + if (val == msa311_odr_table[odr].integral && + val2 == msa311_odr_table[odr].microfract) { + mutex_lock(&msa311->lock); + err = msa311_set_odr(msa311, odr); + mutex_unlock(&msa311->lock); + break; + } + + iio_device_release_direct_mode(indio_dev); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + if (err) + dev_err(dev, "can't update frequency (%pe)\n", ERR_PTR(err)); + + return err; +} + +static int msa311_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return msa311_write_scale(indio_dev, val, val2); + + case IIO_CHAN_INFO_SAMP_FREQ: + return msa311_write_samp_freq(indio_dev, val, val2); + + default: + return -EINVAL; + } +} + +static int msa311_debugfs_reg_access(struct iio_dev *indio_dev, + unsigned int reg, unsigned int writeval, + unsigned int *readval) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + int err; + + if (reg > regmap_get_max_register(msa311->regs)) + return -EINVAL; + + err = pm_runtime_resume_and_get(dev); + if (err) + return err; + + mutex_lock(&msa311->lock); + + if (readval) + err = regmap_read(msa311->regs, reg, readval); + else + err = regmap_write(msa311->regs, reg, writeval); + + mutex_unlock(&msa311->lock); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + if (err) + dev_err(dev, "can't %s register %u from debugfs (%pe)\n", + str_read_write(readval), reg, ERR_PTR(err)); + + return err; +} + +static int msa311_buffer_preenable(struct iio_dev *indio_dev) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + + return pm_runtime_resume_and_get(dev); +} + +static int msa311_buffer_postdisable(struct iio_dev *indio_dev) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return 0; +} + +static int msa311_set_new_data_trig_state(struct iio_trigger *trig, bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + int err; + + mutex_lock(&msa311->lock); + err = regmap_field_write(msa311->fields[F_NEW_DATA_INT_EN], state); + mutex_unlock(&msa311->lock); + if (err) + dev_err(dev, + "can't %s buffer due to new_data_int failure (%pe)\n", + str_enable_disable(state), ERR_PTR(err)); + + return err; +} + +static int msa311_validate_device(struct iio_trigger *trig, + struct iio_dev *indio_dev) +{ + return iio_trigger_get_drvdata(trig) == indio_dev ? 0 : -EINVAL; +} + +static irqreturn_t msa311_buffer_thread(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct msa311_priv *msa311 = iio_priv(pf->indio_dev); + struct iio_dev *indio_dev = pf->indio_dev; + const struct iio_chan_spec *chan; + struct device *dev = msa311->dev; + int bit, err, i = 0; + __le16 axis; + struct { + __le16 channels[MSA311_SI_Z + 1]; + s64 ts __aligned(8); + } buf; + + memset(&buf, 0, sizeof(buf)); + + mutex_lock(&msa311->lock); + + for_each_set_bit(bit, indio_dev->active_scan_mask, + indio_dev->masklength) { + chan = &msa311_channels[bit]; + + err = msa311_get_axis(msa311, chan, &axis); + if (err) { + mutex_unlock(&msa311->lock); + dev_err(dev, "can't get axis %s (%pe)\n", + chan->datasheet_name, ERR_PTR(err)); + goto notify_done; + } + + buf.channels[i++] = axis; + } + + mutex_unlock(&msa311->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, &buf, + iio_get_time_ns(indio_dev)); + +notify_done: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static irqreturn_t msa311_irq_thread(int irq, void *p) +{ + struct msa311_priv *msa311 = iio_priv(p); + unsigned int new_data_int_enabled; + struct device *dev = msa311->dev; + int err; + + mutex_lock(&msa311->lock); + + /* + * We do not check NEW_DATA int status, because based on the + * specification it's cleared automatically after a fixed time. + * So just check that is enabled by driver logic. + */ + err = regmap_field_read(msa311->fields[F_NEW_DATA_INT_EN], + &new_data_int_enabled); + + mutex_unlock(&msa311->lock); + if (err) { + dev_err(dev, "can't read new_data interrupt state (%pe)\n", + ERR_PTR(err)); + return IRQ_NONE; + } + + if (new_data_int_enabled) + iio_trigger_poll_chained(msa311->new_data_trig); + + return IRQ_HANDLED; +} + +static const struct iio_info msa311_info = { + .read_raw = msa311_read_raw, + .read_avail = msa311_read_avail, + .write_raw = msa311_write_raw, + .debugfs_reg_access = msa311_debugfs_reg_access, +}; + +static const struct iio_buffer_setup_ops msa311_buffer_setup_ops = { + .preenable = msa311_buffer_preenable, + .postdisable = msa311_buffer_postdisable, +}; + +static const struct iio_trigger_ops msa311_new_data_trig_ops = { + .set_trigger_state = msa311_set_new_data_trig_state, + .validate_device = msa311_validate_device, +}; + +static int msa311_check_partid(struct msa311_priv *msa311) +{ + struct device *dev = msa311->dev; + unsigned int partid; + int err; + + err = regmap_read(msa311->regs, MSA311_PARTID_REG, &partid); + if (err) + return dev_err_probe(dev, err, "failed to read partid\n"); + + if (partid != MSA311_WHO_AM_I) + dev_warn(dev, "invalid partid (%#x), expected (%#x)\n", + partid, MSA311_WHO_AM_I); + + msa311->chip_name = devm_kasprintf(dev, GFP_KERNEL, + "msa311-%02x", partid); + if (!msa311->chip_name) + return dev_err_probe(dev, -ENOMEM, "can't alloc chip name\n"); + + return 0; +} + +static int msa311_soft_reset(struct msa311_priv *msa311) +{ + struct device *dev = msa311->dev; + int err; + + err = regmap_write(msa311->regs, MSA311_SOFT_RESET_REG, + MSA311_GENMASK(F_SOFT_RESET_I2C) | + MSA311_GENMASK(F_SOFT_RESET_SPI)); + if (err) + return dev_err_probe(dev, err, "can't soft reset all logic\n"); + + return 0; +} + +static int msa311_chip_init(struct msa311_priv *msa311) +{ + struct device *dev = msa311->dev; + const char zero_bulk[2] = { }; + int err; + + err = regmap_write(msa311->regs, MSA311_RANGE_REG, MSA311_FS_16G); + if (err) + return dev_err_probe(dev, err, "failed to setup accel range\n"); + + /* Disable all interrupts by default */ + err = regmap_bulk_write(msa311->regs, MSA311_INT_SET_0_REG, + zero_bulk, sizeof(zero_bulk)); + if (err) + return dev_err_probe(dev, err, + "can't disable set0/set1 interrupts\n"); + + /* Unmap all INT1 interrupts by default */ + err = regmap_bulk_write(msa311->regs, MSA311_INT_MAP_0_REG, + zero_bulk, sizeof(zero_bulk)); + if (err) + return dev_err_probe(dev, err, + "failed to unmap map0/map1 interrupts\n"); + + /* Disable all axes by default */ + err = regmap_update_bits(msa311->regs, MSA311_ODR_REG, + MSA311_GENMASK(F_X_AXIS_DIS) | + MSA311_GENMASK(F_Y_AXIS_DIS) | + MSA311_GENMASK(F_Z_AXIS_DIS), 0); + if (err) + return dev_err_probe(dev, err, "can't enable all axes\n"); + + err = msa311_set_odr(msa311, MSA311_ODR_125_HZ); + if (err) + return dev_err_probe(dev, err, + "failed to set accel frequency\n"); + + return 0; +} + +static int msa311_setup_interrupts(struct msa311_priv *msa311) +{ + struct device *dev = msa311->dev; + struct i2c_client *i2c = to_i2c_client(dev); + struct iio_dev *indio_dev = i2c_get_clientdata(i2c); + struct iio_trigger *trig; + int err; + + /* Keep going without interrupts if no initialized I2C IRQ */ + if (i2c->irq <= 0) + return 0; + + err = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, + msa311_irq_thread, IRQF_ONESHOT, + msa311->chip_name, indio_dev); + if (err) + return dev_err_probe(dev, err, "failed to request IRQ\n"); + + trig = devm_iio_trigger_alloc(dev, "%s-new-data", msa311->chip_name); + if (!trig) + return dev_err_probe(dev, -ENOMEM, + "can't allocate newdata trigger\n"); + + msa311->new_data_trig = trig; + msa311->new_data_trig->ops = &msa311_new_data_trig_ops; + iio_trigger_set_drvdata(msa311->new_data_trig, indio_dev); + + err = devm_iio_trigger_register(dev, msa311->new_data_trig); + if (err) + return dev_err_probe(dev, err, + "can't register newdata trigger\n"); + + err = regmap_field_write(msa311->fields[F_INT1_OD], + MSA311_INT1_OD_PUSH_PULL); + if (err) + return dev_err_probe(dev, err, + "can't enable push-pull interrupt\n"); + + err = regmap_field_write(msa311->fields[F_INT1_LVL], + MSA311_INT1_LVL_HIGH); + if (err) + return dev_err_probe(dev, err, + "can't set active interrupt level\n"); + + err = regmap_field_write(msa311->fields[F_LATCH_INT], + MSA311_LATCH_INT_LATCHED); + if (err) + return dev_err_probe(dev, err, + "can't latch interrupt\n"); + + err = regmap_field_write(msa311->fields[F_RESET_INT], 1); + if (err) + return dev_err_probe(dev, err, + "can't reset interrupt\n"); + + err = regmap_field_write(msa311->fields[F_INT1_NEW_DATA], 1); + if (err) + return dev_err_probe(dev, err, + "can't map new data interrupt\n"); + + return 0; +} + +static int msa311_regmap_init(struct msa311_priv *msa311) +{ + struct regmap_field **fields = msa311->fields; + struct device *dev = msa311->dev; + struct i2c_client *i2c = to_i2c_client(dev); + struct regmap *regmap; + int i; + + regmap = devm_regmap_init_i2c(i2c, &msa311_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "failed to register i2c regmap\n"); + + msa311->regs = regmap; + + for (i = 0; i < F_MAX_FIELDS; i++) { + fields[i] = devm_regmap_field_alloc(dev, + msa311->regs, + msa311_reg_fields[i]); + if (IS_ERR(msa311->fields[i])) + return dev_err_probe(dev, PTR_ERR(msa311->fields[i]), + "can't alloc field[%d]\n", i); + } + + return 0; +} + +static void msa311_powerdown(void *msa311) +{ + msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_SUSPEND); +} + +static void msa311_vdd_disable(void *vdd) +{ + regulator_disable(vdd); +} + +static int msa311_probe(struct i2c_client *i2c) +{ + struct device *dev = &i2c->dev; + struct msa311_priv *msa311; + struct iio_dev *indio_dev; + int err; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*msa311)); + if (!indio_dev) + return dev_err_probe(dev, -ENOMEM, + "IIO device allocation failed\n"); + + msa311 = iio_priv(indio_dev); + msa311->dev = dev; + i2c_set_clientdata(i2c, indio_dev); + + err = msa311_regmap_init(msa311); + if (err) + return err; + + mutex_init(&msa311->lock); + + msa311->vdd = devm_regulator_get(dev, "vdd"); + if (IS_ERR(msa311->vdd)) + return dev_err_probe(dev, PTR_ERR(msa311->vdd), + "can't get vdd supply\n"); + + err = regulator_enable(msa311->vdd); + if (err) + return dev_err_probe(dev, err, "can't enable vdd supply\n"); + + err = devm_add_action_or_reset(dev, msa311_vdd_disable, msa311->vdd); + if (err) + return dev_err_probe(dev, err, + "can't add vdd disable action\n"); + + err = msa311_check_partid(msa311); + if (err) + return err; + + err = msa311_soft_reset(msa311); + if (err) + return err; + + err = msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_NORMAL); + if (err) + return dev_err_probe(dev, err, "failed to power on device\n"); + + /* + * Register powerdown deferred callback which suspends the chip + * after module unloaded. + * + * MSA311 should be in SUSPEND mode in the two cases: + * 1) When driver is loaded, but we do not have any data or + * configuration requests to it (we are solving it using + * autosuspend feature). + * 2) When driver is unloaded and device is not used (devm action is + * used in this case). + */ + err = devm_add_action_or_reset(dev, msa311_powerdown, msa311); + if (err) + return dev_err_probe(dev, err, "can't add powerdown action\n"); + + err = pm_runtime_set_active(dev); + if (err) + return err; + + err = devm_pm_runtime_enable(dev); + if (err) + return err; + + pm_runtime_get_noresume(dev); + pm_runtime_set_autosuspend_delay(dev, MSA311_PWR_SLEEP_DELAY_MS); + pm_runtime_use_autosuspend(dev); + + err = msa311_chip_init(msa311); + if (err) + return err; + + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = msa311_channels; + indio_dev->num_channels = ARRAY_SIZE(msa311_channels); + indio_dev->name = msa311->chip_name; + indio_dev->info = &msa311_info; + + err = devm_iio_triggered_buffer_setup(dev, indio_dev, + iio_pollfunc_store_time, + msa311_buffer_thread, + &msa311_buffer_setup_ops); + if (err) + return dev_err_probe(dev, err, + "can't setup IIO trigger buffer\n"); + + err = msa311_setup_interrupts(msa311); + if (err) + return err; + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + err = devm_iio_device_register(dev, indio_dev); + if (err) + return dev_err_probe(dev, err, "IIO device register failed\n"); + + return 0; +} + +static int msa311_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct msa311_priv *msa311 = iio_priv(indio_dev); + int err; + + mutex_lock(&msa311->lock); + err = msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_SUSPEND); + mutex_unlock(&msa311->lock); + if (err) + dev_err(dev, "failed to power off device (%pe)\n", + ERR_PTR(err)); + + return err; +} + +static int msa311_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct msa311_priv *msa311 = iio_priv(indio_dev); + int err; + + mutex_lock(&msa311->lock); + err = msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_NORMAL); + mutex_unlock(&msa311->lock); + if (err) + dev_err(dev, "failed to power on device (%pe)\n", + ERR_PTR(err)); + + return err; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(msa311_pm_ops, msa311_runtime_suspend, + msa311_runtime_resume, NULL); + +static const struct i2c_device_id msa311_i2c_id[] = { + { .name = "msa311" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, msa311_i2c_id); + +static const struct of_device_id msa311_of_match[] = { + { .compatible = "memsensing,msa311" }, + { } +}; +MODULE_DEVICE_TABLE(of, msa311_of_match); + +static struct i2c_driver msa311_driver = { + .driver = { + .name = "msa311", + .of_match_table = msa311_of_match, + .pm = pm_ptr(&msa311_pm_ops), + }, + .probe_new = msa311_probe, + .id_table = msa311_i2c_id, +}; +module_i2c_driver(msa311_driver); + +MODULE_AUTHOR("Dmitry Rokosov "); +MODULE_DESCRIPTION("MEMSensing MSA311 3-axis accelerometer driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 7fe5930891e0..56e3ca3b4a5d 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -653,6 +653,20 @@ config MAX1118 To compile this driver as a module, choose M here: the module will be called max1118. +config MAX11205 + tristate "Maxim max11205 ADC driver" + depends on SPI + select AD_SIGMA_DELTA + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + + help + Say yes here to build support for Maxim max11205 16-bit, single-channel + ultra-low power delta-sigma ADC. + + To compile this driver as a module, choose M here: the module will be + called max11205. + config MAX1241 tristate "Maxim max1241 ADC driver" depends on SPI_MASTER @@ -919,6 +933,21 @@ config ROCKCHIP_SARADC To compile this driver as a module, choose M here: the module will be called rockchip_saradc. +config RICHTEK_RTQ6056 + tristate "Richtek RTQ6056 Current and Power Monitor ADC" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to enable RQT6056 ADC support. + RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus + compatible interface, and the device provides full information for + system by reading out the load current and power. + + This driver can also be built as a module. If so, the module will be + called rtq6056. + config RZG2L_ADC tristate "Renesas RZ/G2L ADC driver" depends on ARCH_RZG2L || COMPILE_TEST @@ -1022,22 +1051,6 @@ config STMPE_ADC Say yes here to build support for ST Microelectronics STMPE built-in ADC block (stmpe811). -config STX104 - tristate "Apex Embedded Systems STX104 driver" - depends on PC104 && X86 - select ISA_BUS_API - select GPIOLIB - help - Say yes here to build support for the Apex Embedded Systems STX104 - integrated analog PC/104 card. - - This driver supports the 16 channels of single-ended (8 channels of - differential) analog inputs, 2 channels of analog output, 4 digital - inputs, and 4 digital outputs provided by the STX104. - - The base port addresses for the devices may be configured via the base - array module parameter. - config SUN4I_GPADC tristate "Support for the Allwinner SoCs GPADC" depends on IIO diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 1772a549a3c8..46caba7a010c 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_LTC2497) += ltc2497.o ltc2497-core.o obj-$(CONFIG_MAX1027) += max1027.o obj-$(CONFIG_MAX11100) += max11100.o obj-$(CONFIG_MAX1118) += max1118.o +obj-$(CONFIG_MAX11205) += max11205.o obj-$(CONFIG_MAX1241) += max1241.o obj-$(CONFIG_MAX1363) += max1363.o obj-$(CONFIG_MAX9611) += max9611.o @@ -85,10 +86,10 @@ obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o obj-$(CONFIG_RN5T618_ADC) += rn5t618-adc.o obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o +obj-$(CONFIG_RICHTEK_RTQ6056) += rtq6056.o obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o obj-$(CONFIG_SPEAR_ADC) += spear_adc.o -obj-$(CONFIG_STX104) += stx104.o obj-$(CONFIG_SUN4I_GPADC) += sun4i-gpadc-iio.o obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o obj-$(CONFIG_STM32_ADC) += stm32-adc.o diff --git a/drivers/iio/adc/ab8500-gpadc.c b/drivers/iio/adc/ab8500-gpadc.c index 930ce96e6ff5..4fa2126a354b 100644 --- a/drivers/iio/adc/ab8500-gpadc.c +++ b/drivers/iio/adc/ab8500-gpadc.c @@ -925,8 +925,8 @@ static int ab8500_gpadc_read_raw(struct iio_dev *indio_dev, return -EINVAL; } -static int ab8500_gpadc_of_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static int ab8500_gpadc_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { int i; @@ -938,7 +938,7 @@ static int ab8500_gpadc_of_xlate(struct iio_dev *indio_dev, } static const struct iio_info ab8500_gpadc_info = { - .of_xlate = ab8500_gpadc_of_xlate, + .fwnode_xlate = ab8500_gpadc_fwnode_xlate, .read_raw = ab8500_gpadc_read_raw, }; @@ -968,7 +968,7 @@ static int ab8500_gpadc_runtime_resume(struct device *dev) /** * ab8500_gpadc_parse_channel() - process devicetree channel configuration * @dev: pointer to containing device - * @np: device tree node for the channel to configure + * @fwnode: fw node for the channel to configure * @ch: channel info to fill in * @iio_chan: IIO channel specification to fill in * @@ -976,15 +976,15 @@ static int ab8500_gpadc_runtime_resume(struct device *dev) * and define usage for things like AUX GPADC inputs more precisely. */ static int ab8500_gpadc_parse_channel(struct device *dev, - struct device_node *np, + struct fwnode_handle *fwnode, struct ab8500_gpadc_chan_info *ch, struct iio_chan_spec *iio_chan) { - const char *name = np->name; + const char *name = fwnode_get_name(fwnode); u32 chan; int ret; - ret = of_property_read_u32(np, "reg", &chan); + ret = fwnode_property_read_u32(fwnode, "reg", &chan); if (ret) { dev_err(dev, "invalid channel number %s\n", name); return ret; @@ -1021,22 +1021,20 @@ static int ab8500_gpadc_parse_channel(struct device *dev, /** * ab8500_gpadc_parse_channels() - Parse the GPADC channels from DT * @gpadc: the GPADC to configure the channels for - * @np: device tree node containing the channel configurations * @chans: the IIO channels we parsed * @nchans: the number of IIO channels we parsed */ static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc, - struct device_node *np, struct iio_chan_spec **chans_parsed, unsigned int *nchans_parsed) { - struct device_node *child; + struct fwnode_handle *child; struct ab8500_gpadc_chan_info *ch; struct iio_chan_spec *iio_chans; unsigned int nchans; int i; - nchans = of_get_available_child_count(np); + nchans = device_get_child_node_count(gpadc->dev); if (!nchans) { dev_err(gpadc->dev, "no channel children\n"); return -ENODEV; @@ -1054,7 +1052,7 @@ static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc, return -ENOMEM; i = 0; - for_each_available_child_of_node(np, child) { + device_for_each_child_node(gpadc->dev, child) { struct iio_chan_spec *iio_chan; int ret; @@ -1064,7 +1062,7 @@ static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc, ret = ab8500_gpadc_parse_channel(gpadc->dev, child, ch, iio_chan); if (ret) { - of_node_put(child); + fwnode_handle_put(child); return ret; } i++; @@ -1081,7 +1079,6 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) struct ab8500_gpadc *gpadc; struct iio_dev *indio_dev; struct device *dev = &pdev->dev; - struct device_node *np = pdev->dev.of_node; struct iio_chan_spec *iio_chans; unsigned int n_iio_chans; int ret; @@ -1096,7 +1093,7 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) gpadc->dev = dev; gpadc->ab8500 = dev_get_drvdata(dev->parent); - ret = ab8500_gpadc_parse_channels(gpadc, np, &iio_chans, &n_iio_chans); + ret = ab8500_gpadc_parse_channels(gpadc, &iio_chans, &n_iio_chans); if (ret) return ret; diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c index c5b785d8b241..4088786e1026 100644 --- a/drivers/iio/adc/ad7124.c +++ b/drivers/iio/adc/ad7124.c @@ -936,11 +936,6 @@ static void ad7124_reg_disable(void *r) regulator_disable(r); } -static void ad7124_clk_disable(void *c) -{ - clk_disable_unprepare(c); -} - static int ad7124_probe(struct spi_device *spi) { const struct ad7124_chip_info *info; @@ -993,18 +988,10 @@ static int ad7124_probe(struct spi_device *spi) return ret; } - st->mclk = devm_clk_get(&spi->dev, "mclk"); + st->mclk = devm_clk_get_enabled(&spi->dev, "mclk"); if (IS_ERR(st->mclk)) return PTR_ERR(st->mclk); - ret = clk_prepare_enable(st->mclk); - if (ret < 0) - return ret; - - ret = devm_add_action_or_reset(&spi->dev, ad7124_clk_disable, st->mclk); - if (ret) - return ret; - ret = ad7124_soft_reset(st); if (ret < 0) return ret; diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c index 652db768ef37..70a25949142c 100644 --- a/drivers/iio/adc/ad7768-1.c +++ b/drivers/iio/adc/ad7768-1.c @@ -539,13 +539,6 @@ static void ad7768_regulator_disable(void *data) regulator_disable(st->vref); } -static void ad7768_clk_disable(void *data) -{ - struct ad7768_state *st = data; - - clk_disable_unprepare(st->mclk); -} - static int ad7768_set_channel_label(struct iio_dev *indio_dev, int num_channels) { @@ -600,18 +593,10 @@ static int ad7768_probe(struct spi_device *spi) if (ret) return ret; - st->mclk = devm_clk_get(&spi->dev, "mclk"); + st->mclk = devm_clk_get_enabled(&spi->dev, "mclk"); if (IS_ERR(st->mclk)) return PTR_ERR(st->mclk); - ret = clk_prepare_enable(st->mclk); - if (ret < 0) - return ret; - - ret = devm_add_action_or_reset(&spi->dev, ad7768_clk_disable, st); - if (ret) - return ret; - st->mclk_freq = clk_get_rate(st->mclk); mutex_init(&st->lock); diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c index 5a5f33f7bc8f..7534572f7475 100644 --- a/drivers/iio/adc/ad9467.c +++ b/drivers/iio/adc/ad9467.c @@ -378,13 +378,6 @@ static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv) return ad9467_outputmode_set(st->spi, st->output_mode); } -static void ad9467_clk_disable(void *data) -{ - struct ad9467_state *st = data; - - clk_disable_unprepare(st->clk); -} - static int ad9467_probe(struct spi_device *spi) { const struct ad9467_chip_info *info; @@ -404,18 +397,10 @@ static int ad9467_probe(struct spi_device *spi) st = adi_axi_adc_conv_priv(conv); st->spi = spi; - st->clk = devm_clk_get(&spi->dev, "adc-clk"); + st->clk = devm_clk_get_enabled(&spi->dev, "adc-clk"); if (IS_ERR(st->clk)) return PTR_ERR(st->clk); - ret = clk_prepare_enable(st->clk); - if (ret < 0) - return ret; - - ret = devm_add_action_or_reset(&spi->dev, ad9467_clk_disable, st); - if (ret) - return ret; - st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown", GPIOD_OUT_LOW); if (IS_ERR(st->pwrdown_gpio)) diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c index 279430c1d88c..4294d6539cdb 100644 --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -16,9 +16,11 @@ #include #include #include -#include +#include #include +#include #include +#include #include #include #include @@ -26,9 +28,13 @@ #include #include #include +#include #include +#include #include +#include + struct at91_adc_reg_layout { /* Control Register */ u16 CR; @@ -73,11 +79,14 @@ struct at91_adc_reg_layout { /* Startup Time */ #define AT91_SAMA5D2_MR_STARTUP(v) ((v) << 16) #define AT91_SAMA5D2_MR_STARTUP_MASK GENMASK(19, 16) +/* Minimum startup time for temperature sensor */ +#define AT91_SAMA5D2_MR_STARTUP_TS_MIN (50) /* Analog Change */ #define AT91_SAMA5D2_MR_ANACH BIT(23) /* Tracking Time */ #define AT91_SAMA5D2_MR_TRACKTIM(v) ((v) << 24) -#define AT91_SAMA5D2_MR_TRACKTIM_MAX 0xff +#define AT91_SAMA5D2_MR_TRACKTIM_TS 6 +#define AT91_SAMA5D2_MR_TRACKTIM_MAX 0xf /* Transfer Time */ #define AT91_SAMA5D2_MR_TRANSFER(v) ((v) << 28) #define AT91_SAMA5D2_MR_TRANSFER_MAX 0x3 @@ -138,11 +147,19 @@ struct at91_adc_reg_layout { /* Extended Mode Register */ u16 EMR; /* Extended Mode Register - Oversampling rate */ -#define AT91_SAMA5D2_EMR_OSR(V) ((V) << 16) -#define AT91_SAMA5D2_EMR_OSR_MASK GENMASK(17, 16) +#define AT91_SAMA5D2_EMR_OSR(V, M) (((V) << 16) & (M)) #define AT91_SAMA5D2_EMR_OSR_1SAMPLES 0 #define AT91_SAMA5D2_EMR_OSR_4SAMPLES 1 #define AT91_SAMA5D2_EMR_OSR_16SAMPLES 2 +#define AT91_SAMA5D2_EMR_OSR_64SAMPLES 3 +#define AT91_SAMA5D2_EMR_OSR_256SAMPLES 4 + +/* Extended Mode Register - TRACKX */ +#define AT91_SAMA5D2_TRACKX_MASK GENMASK(23, 22) +#define AT91_SAMA5D2_TRACKX(x) (((x) << 22) & \ + AT91_SAMA5D2_TRACKX_MASK) +/* TRACKX for temperature sensor. */ +#define AT91_SAMA5D2_TRACKX_TS (1) /* Extended Mode Register - Averaging on single trigger event */ #define AT91_SAMA5D2_EMR_ASTE(V) ((V) << 20) @@ -159,6 +176,8 @@ struct at91_adc_reg_layout { u16 ACR; /* Analog Control Register - Pen detect sensitivity mask */ #define AT91_SAMA5D2_ACR_PENDETSENS_MASK GENMASK(1, 0) +/* Analog Control Register - Source last channel */ +#define AT91_SAMA5D2_ACR_SRCLCH BIT(16) /* Touchscreen Mode Register */ u16 TSMR; @@ -226,6 +245,10 @@ struct at91_adc_reg_layout { u16 WPSR; /* Version Register */ u16 VERSION; +/* Temperature Sensor Mode Register */ + u16 TEMPMR; +/* Temperature Sensor Mode - Temperature sensor on */ +#define AT91_SAMA5D2_TEMPMR_TEMPON BIT(0) }; static const struct at91_adc_reg_layout sama5d2_layout = { @@ -280,6 +303,7 @@ static const struct at91_adc_reg_layout sama7g5_layout = { .EOC_IDR = 0x38, .EOC_IMR = 0x3c, .EOC_ISR = 0x40, + .TEMPMR = 0x44, .OVER = 0x4c, .EMR = 0x50, .CWR = 0x54, @@ -305,11 +329,6 @@ static const struct at91_adc_reg_layout sama7g5_layout = { #define AT91_HWFIFO_MAX_SIZE_STR "128" #define AT91_HWFIFO_MAX_SIZE 128 -/* Possible values for oversampling ratio */ -#define AT91_OSR_1SAMPLES 1 -#define AT91_OSR_4SAMPLES 4 -#define AT91_OSR_16SAMPLES 16 - #define AT91_SAMA5D2_CHAN_SINGLE(index, num, addr) \ { \ .type = IIO_VOLTAGE, \ @@ -325,6 +344,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = { .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_all_available = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .datasheet_name = "CH"#num, \ .indexed = 1, \ } @@ -346,6 +367,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = { .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_all_available = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .datasheet_name = "CH"#num"-CH"#num2, \ .indexed = 1, \ } @@ -365,6 +388,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = { .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_all_available = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .datasheet_name = name, \ } #define AT91_SAMA5D2_CHAN_PRESSURE(num, name) \ @@ -380,6 +405,23 @@ static const struct at91_adc_reg_layout sama7g5_layout = { .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_all_available = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .datasheet_name = name, \ + } + +#define AT91_SAMA5D2_CHAN_TEMP(num, name, addr) \ + { \ + .type = IIO_TEMP, \ + .channel = num, \ + .address = addr, \ + .scan_index = num, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ + .info_mask_shared_by_all = \ + BIT(IIO_CHAN_INFO_PROCESSED) | \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_all_available = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .datasheet_name = name, \ } @@ -403,6 +445,12 @@ static const struct at91_adc_reg_layout sama7g5_layout = { * @max_index: highest channel index (highest index may be higher * than the total channel number) * @hw_trig_cnt: number of possible hardware triggers + * @osr_mask: oversampling ratio bitmask on EMR register + * @oversampling_avail: available oversampling values + * @oversampling_avail_no: number of available oversampling values + * @chan_realbits: realbits for registered channels + * @temp_chan: temperature channel index + * @temp_sensor: temperature sensor supported */ struct at91_adc_platform { const struct at91_adc_reg_layout *layout; @@ -414,20 +462,58 @@ struct at91_adc_platform { unsigned int max_channels; unsigned int max_index; unsigned int hw_trig_cnt; + unsigned int osr_mask; + unsigned int oversampling_avail[5]; + unsigned int oversampling_avail_no; + unsigned int chan_realbits; + unsigned int temp_chan; + bool temp_sensor; }; +/** + * struct at91_adc_temp_sensor_clb - at91-sama5d2 temperature sensor + * calibration data structure + * @p1: P1 calibration temperature + * @p4: P4 calibration voltage + * @p6: P6 calibration voltage + */ +struct at91_adc_temp_sensor_clb { + u32 p1; + u32 p4; + u32 p6; +}; + +/** + * enum at91_adc_ts_clb_idx - calibration indexes in NVMEM buffer + * @AT91_ADC_TS_CLB_IDX_P1: index for P1 + * @AT91_ADC_TS_CLB_IDX_P4: index for P4 + * @AT91_ADC_TS_CLB_IDX_P6: index for P6 + * @AT91_ADC_TS_CLB_IDX_MAX: max index for temperature calibration packet in OTP + */ +enum at91_adc_ts_clb_idx { + AT91_ADC_TS_CLB_IDX_P1 = 2, + AT91_ADC_TS_CLB_IDX_P4 = 5, + AT91_ADC_TS_CLB_IDX_P6 = 7, + AT91_ADC_TS_CLB_IDX_MAX = 19, +}; + +/* Temperature sensor calibration - Vtemp voltage sensitivity to temperature. */ +#define AT91_ADC_TS_VTEMP_DT (2080U) + /** * struct at91_adc_soc_info - at91-sama5d2 soc information struct * @startup_time: device startup time * @min_sample_rate: minimum sample rate in Hz * @max_sample_rate: maximum sample rate in Hz * @platform: pointer to the platform structure + * @temp_sensor_clb: temperature sensor calibration data structure */ struct at91_adc_soc_info { unsigned startup_time; unsigned min_sample_rate; unsigned max_sample_rate; const struct at91_adc_platform *platform; + struct at91_adc_temp_sensor_clb temp_sensor_clb; }; struct at91_adc_trigger { @@ -475,6 +561,18 @@ struct at91_adc_touch { struct work_struct workq; }; +/** + * struct at91_adc_temp - at91-sama5d2 temperature information structure + * @sample_period_val: sample period value + * @saved_sample_rate: saved sample rate + * @saved_oversampling: saved oversampling + */ +struct at91_adc_temp { + u16 sample_period_val; + u16 saved_sample_rate; + u16 saved_oversampling; +}; + /* * Buffer size requirements: * No channels * bytes_per_channel(2) + timestamp bytes (8) @@ -502,7 +600,9 @@ struct at91_adc_state { wait_queue_head_t wq_data_available; struct at91_adc_dma dma_st; struct at91_adc_touch touch_st; + struct at91_adc_temp temp_st; struct iio_dev *indio_dev; + struct device *dev; /* Ensure naturally aligned timestamp */ u16 buffer[AT91_BUFFER_MAX_HWORDS] __aligned(8); /* @@ -591,6 +691,7 @@ static const struct iio_chan_spec at91_sama7g5_adc_channels[] = { AT91_SAMA5D2_CHAN_DIFF(22, 12, 13, 0x90), AT91_SAMA5D2_CHAN_DIFF(23, 14, 15, 0x98), IIO_CHAN_SOFT_TIMESTAMP(24), + AT91_SAMA5D2_CHAN_TEMP(AT91_SAMA7G5_ADC_TEMP_CHANNEL, "temp", 0xdc), }; static const struct at91_adc_platform sama5d2_platform = { @@ -612,6 +713,10 @@ static const struct at91_adc_platform sama5d2_platform = { .max_index = AT91_SAMA5D2_MAX_CHAN_IDX, #define AT91_SAMA5D2_HW_TRIG_CNT 3 .hw_trig_cnt = AT91_SAMA5D2_HW_TRIG_CNT, + .osr_mask = GENMASK(17, 16), + .oversampling_avail = { 1, 4, 16, }, + .oversampling_avail_no = 3, + .chan_realbits = 14, }; static const struct at91_adc_platform sama7g5_platform = { @@ -619,14 +724,23 @@ static const struct at91_adc_platform sama7g5_platform = { .adc_channels = &at91_sama7g5_adc_channels, #define AT91_SAMA7G5_SINGLE_CHAN_CNT 16 #define AT91_SAMA7G5_DIFF_CHAN_CNT 8 +#define AT91_SAMA7G5_TEMP_CHAN_CNT 1 .nr_channels = AT91_SAMA7G5_SINGLE_CHAN_CNT + - AT91_SAMA7G5_DIFF_CHAN_CNT, + AT91_SAMA7G5_DIFF_CHAN_CNT + + AT91_SAMA7G5_TEMP_CHAN_CNT, #define AT91_SAMA7G5_MAX_CHAN_IDX (AT91_SAMA7G5_SINGLE_CHAN_CNT + \ - AT91_SAMA7G5_DIFF_CHAN_CNT) + AT91_SAMA7G5_DIFF_CHAN_CNT + \ + AT91_SAMA7G5_TEMP_CHAN_CNT) .max_channels = ARRAY_SIZE(at91_sama7g5_adc_channels), .max_index = AT91_SAMA7G5_MAX_CHAN_IDX, #define AT91_SAMA7G5_HW_TRIG_CNT 3 .hw_trig_cnt = AT91_SAMA7G5_HW_TRIG_CNT, + .osr_mask = GENMASK(18, 16), + .oversampling_avail = { 1, 4, 16, 64, 256, }, + .oversampling_avail_no = 5, + .chan_realbits = 16, + .temp_sensor = true, + .temp_chan = AT91_SAMA7G5_ADC_TEMP_CHANNEL, }; static int at91_adc_chan_xlate(struct iio_dev *indio_dev, int chan) @@ -650,8 +764,8 @@ at91_adc_chan_get(struct iio_dev *indio_dev, int chan) return indio_dev->channels + index; } -static inline int at91_adc_of_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static inline int at91_adc_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { return at91_adc_chan_xlate(indio_dev, iiospec->args[0]); } @@ -725,51 +839,91 @@ static void at91_adc_eoc_ena(struct at91_adc_state *st, unsigned int channel) at91_adc_writel(st, EOC_IER, BIT(channel)); } -static void at91_adc_config_emr(struct at91_adc_state *st) +static int at91_adc_config_emr(struct at91_adc_state *st, + u32 oversampling_ratio, u32 trackx) { /* configure the extended mode register */ - unsigned int emr = at91_adc_readl(st, EMR); + unsigned int emr, osr; + unsigned int osr_mask = st->soc_info.platform->osr_mask; + int i, ret; - /* select oversampling per single trigger event */ - emr |= AT91_SAMA5D2_EMR_ASTE(1); - - /* delete leftover content if it's the case */ - emr &= ~AT91_SAMA5D2_EMR_OSR_MASK; + /* Check against supported oversampling values. */ + for (i = 0; i < st->soc_info.platform->oversampling_avail_no; i++) { + if (oversampling_ratio == st->soc_info.platform->oversampling_avail[i]) + break; + } + if (i == st->soc_info.platform->oversampling_avail_no) + return -EINVAL; /* select oversampling ratio from configuration */ - switch (st->oversampling_ratio) { - case AT91_OSR_1SAMPLES: - emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_1SAMPLES) & - AT91_SAMA5D2_EMR_OSR_MASK; + switch (oversampling_ratio) { + case 1: + osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_1SAMPLES, + osr_mask); break; - case AT91_OSR_4SAMPLES: - emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_4SAMPLES) & - AT91_SAMA5D2_EMR_OSR_MASK; + case 4: + osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_4SAMPLES, + osr_mask); break; - case AT91_OSR_16SAMPLES: - emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_16SAMPLES) & - AT91_SAMA5D2_EMR_OSR_MASK; + case 16: + osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_16SAMPLES, + osr_mask); + break; + case 64: + osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_64SAMPLES, + osr_mask); + break; + case 256: + osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_256SAMPLES, + osr_mask); break; } + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return ret; + + emr = at91_adc_readl(st, EMR); + /* select oversampling per single trigger event */ + emr |= AT91_SAMA5D2_EMR_ASTE(1); + /* delete leftover content if it's the case */ + emr &= ~(osr_mask | AT91_SAMA5D2_TRACKX_MASK); + /* Update osr and trackx. */ + emr |= osr | AT91_SAMA5D2_TRACKX(trackx); at91_adc_writel(st, EMR, emr); + + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); + + st->oversampling_ratio = oversampling_ratio; + + return 0; } static int at91_adc_adjust_val_osr(struct at91_adc_state *st, int *val) { - if (st->oversampling_ratio == AT91_OSR_1SAMPLES) { - /* - * in this case we only have 12 bits of real data, but channel - * is registered as 14 bits, so shift left two bits - */ - *val <<= 2; - } else if (st->oversampling_ratio == AT91_OSR_4SAMPLES) { - /* - * in this case we have 13 bits of real data, but channel - * is registered as 14 bits, so left shift one bit - */ - *val <<= 1; - } + int nbits, diff; + + if (st->oversampling_ratio == 1) + nbits = 12; + else if (st->oversampling_ratio == 4) + nbits = 13; + else if (st->oversampling_ratio == 16) + nbits = 14; + else if (st->oversampling_ratio == 64) + nbits = 15; + else if (st->oversampling_ratio == 256) + nbits = 16; + else + /* Should not happen. */ + return -EINVAL; + + /* + * We have nbits of real data and channel is registered as + * st->soc_info.platform->chan_realbits, so shift left diff bits. + */ + diff = st->soc_info.platform->chan_realbits - nbits; + *val <<= diff; return IIO_VAL_INT; } @@ -799,15 +953,22 @@ static void at91_adc_adjust_val_osr_array(struct at91_adc_state *st, void *buf, static int at91_adc_configure_touch(struct at91_adc_state *st, bool state) { u32 clk_khz = st->current_sample_rate / 1000; - int i = 0; + int i = 0, ret; u16 pendbc; u32 tsmr, acr; - if (!state) { + if (state) { + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return ret; + } else { /* disabling touch IRQs and setting mode to no touch enabled */ at91_adc_writel(st, IDR, AT91_SAMA5D2_IER_PEN | AT91_SAMA5D2_IER_NOPEN); at91_adc_writel(st, TSMR, 0); + + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); return 0; } /* @@ -948,10 +1109,9 @@ static int at91_adc_read_pressure(struct at91_adc_state *st, int chan, u16 *val) return IIO_VAL_INT; } -static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) +static void at91_adc_configure_trigger_registers(struct at91_adc_state *st, + bool state) { - struct iio_dev *indio = iio_trigger_get_drvdata(trig); - struct at91_adc_state *st = iio_priv(indio); u32 status = at91_adc_readl(st, TRGR); /* clear TRGMOD */ @@ -962,6 +1122,26 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) /* set/unset hw trigger */ at91_adc_writel(st, TRGR, status); +} + +static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) +{ + struct iio_dev *indio = iio_trigger_get_drvdata(trig); + struct at91_adc_state *st = iio_priv(indio); + int ret; + + if (state) { + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return ret; + } + + at91_adc_configure_trigger_registers(st, state); + + if (!state) { + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); + } return 0; } @@ -1120,11 +1300,15 @@ static int at91_adc_buffer_prepare(struct iio_dev *indio_dev) if (!(iio_device_get_current_mode(indio_dev) & INDIO_ALL_TRIGGERED_MODES)) return -EINVAL; + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return ret; + /* we continue with the triggered buffer */ ret = at91_adc_dma_start(indio_dev); if (ret) { dev_err(&indio_dev->dev, "buffer prepare failed\n"); - return ret; + goto pm_runtime_put; } for_each_set_bit(bit, indio_dev->active_scan_mask, @@ -1135,7 +1319,8 @@ static int at91_adc_buffer_prepare(struct iio_dev *indio_dev) continue; /* these channel types cannot be handled by this trigger */ if (chan->type == IIO_POSITIONRELATIVE || - chan->type == IIO_PRESSURE) + chan->type == IIO_PRESSURE || + chan->type == IIO_TEMP) continue; at91_adc_cor(st, chan); @@ -1146,12 +1331,16 @@ static int at91_adc_buffer_prepare(struct iio_dev *indio_dev) if (at91_adc_buffer_check_use_irq(indio_dev, st)) at91_adc_writel(st, IER, AT91_SAMA5D2_IER_DRDY); - return 0; +pm_runtime_put: + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); + return ret; } static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev) { struct at91_adc_state *st = iio_priv(indio_dev); + int ret; u8 bit; /* check if we are disabling triggered buffer or the touchscreen */ @@ -1162,6 +1351,10 @@ static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev) if (!(iio_device_get_current_mode(indio_dev) & INDIO_ALL_TRIGGERED_MODES)) return -EINVAL; + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return ret; + /* * For each enable channel we must disable it in hardware. * In the case of DMA, we must read the last converted value @@ -1177,7 +1370,8 @@ static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev) continue; /* these channel types are virtual, no need to do anything */ if (chan->type == IIO_POSITIONRELATIVE || - chan->type == IIO_PRESSURE) + chan->type == IIO_PRESSURE || + chan->type == IIO_TEMP) continue; at91_adc_writel(st, CHDR, BIT(chan->channel)); @@ -1196,6 +1390,9 @@ static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev) if (st->dma_st.dma_chan) dmaengine_terminate_sync(st->dma_st.dma_chan); + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); + return 0; } @@ -1224,6 +1421,7 @@ static struct iio_trigger *at91_adc_allocate_trigger(struct iio_dev *indio, return trig; } + static void at91_adc_trigger_handler_nodma(struct iio_dev *indio_dev, struct iio_poll_func *pf) { @@ -1377,25 +1575,35 @@ static unsigned at91_adc_startup_time(unsigned startup_time_min, return i; } -static void at91_adc_setup_samp_freq(struct iio_dev *indio_dev, unsigned freq) +static void at91_adc_setup_samp_freq(struct iio_dev *indio_dev, unsigned freq, + unsigned int startup_time, + unsigned int tracktim) { struct at91_adc_state *st = iio_priv(indio_dev); unsigned f_per, prescal, startup, mr; + int ret; f_per = clk_get_rate(st->per_clk); prescal = (f_per / (2 * freq)) - 1; - startup = at91_adc_startup_time(st->soc_info.startup_time, - freq / 1000); + startup = at91_adc_startup_time(startup_time, freq / 1000); + + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return; mr = at91_adc_readl(st, MR); mr &= ~(AT91_SAMA5D2_MR_STARTUP_MASK | AT91_SAMA5D2_MR_PRESCAL_MASK); mr |= AT91_SAMA5D2_MR_STARTUP(startup); mr |= AT91_SAMA5D2_MR_PRESCAL(prescal); + mr |= AT91_SAMA5D2_MR_TRACKTIM(tracktim); at91_adc_writel(st, MR, mr); - dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n", - freq, startup, prescal); + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); + + dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u, tracktim=%u\n", + freq, startup, prescal, tracktim); st->current_sample_rate = freq; } @@ -1522,6 +1730,7 @@ static irqreturn_t at91_adc_interrupt(int irq, void *private) return IRQ_HANDLED; } +/* This needs to be called with direct mode claimed and st->lock locked. */ static int at91_adc_read_info_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val) { @@ -1529,50 +1738,46 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev, u16 tmp_val; int ret; + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return ret; + /* * Keep in mind that we cannot use software trigger or touchscreen * if external trigger is enabled */ if (chan->type == IIO_POSITIONRELATIVE) { - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - mutex_lock(&st->lock); - ret = at91_adc_read_position(st, chan->channel, &tmp_val); *val = tmp_val; - mutex_unlock(&st->lock); - iio_device_release_direct_mode(indio_dev); + if (ret > 0) + ret = at91_adc_adjust_val_osr(st, val); - return at91_adc_adjust_val_osr(st, val); + goto pm_runtime_put; } if (chan->type == IIO_PRESSURE) { - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - mutex_lock(&st->lock); - ret = at91_adc_read_pressure(st, chan->channel, &tmp_val); *val = tmp_val; - mutex_unlock(&st->lock); - iio_device_release_direct_mode(indio_dev); + if (ret > 0) + ret = at91_adc_adjust_val_osr(st, val); - return at91_adc_adjust_val_osr(st, val); + goto pm_runtime_put; } - /* in this case we have a voltage channel */ - - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - mutex_lock(&st->lock); + /* in this case we have a voltage or temperature channel */ st->chan = chan; at91_adc_cor(st, chan); at91_adc_writel(st, CHER, BIT(chan->channel)); + /* + * TEMPMR.TEMPON needs to update after CHER otherwise if none + * of the channels are enabled and TEMPMR.TEMPON = 1 will + * trigger DRDY interruption while preparing for temperature read. + */ + if (chan->type == IIO_TEMP) + at91_adc_writel(st, TEMPMR, AT91_SAMA5D2_TEMPMR_TEMPON); at91_adc_eoc_ena(st, chan->channel); at91_adc_writel(st, CR, AT91_SAMA5D2_CR_START); @@ -1592,14 +1797,125 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev, } at91_adc_eoc_dis(st, st->chan->channel); + if (chan->type == IIO_TEMP) + at91_adc_writel(st, TEMPMR, 0U); at91_adc_writel(st, CHDR, BIT(chan->channel)); /* Needed to ACK the DRDY interruption */ at91_adc_readl(st, LCDR); +pm_runtime_put: + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); + return ret; +} + +static int at91_adc_read_info_locked(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + int ret; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + mutex_lock(&st->lock); + ret = at91_adc_read_info_raw(indio_dev, chan, val); mutex_unlock(&st->lock); iio_device_release_direct_mode(indio_dev); + + return ret; +} + +static void at91_adc_temp_sensor_configure(struct at91_adc_state *st, + bool start) +{ + u32 sample_rate, oversampling_ratio; + u32 startup_time, tracktim, trackx; + + if (start) { + /* + * Configure the sensor for best accuracy: 10MHz frequency, + * oversampling rate of 256, tracktim=0xf and trackx=1. + */ + sample_rate = 10 * MEGA; + oversampling_ratio = 256; + startup_time = AT91_SAMA5D2_MR_STARTUP_TS_MIN; + tracktim = AT91_SAMA5D2_MR_TRACKTIM_TS; + trackx = AT91_SAMA5D2_TRACKX_TS; + + st->temp_st.saved_sample_rate = st->current_sample_rate; + st->temp_st.saved_oversampling = st->oversampling_ratio; + } else { + /* Go back to previous settings. */ + sample_rate = st->temp_st.saved_sample_rate; + oversampling_ratio = st->temp_st.saved_oversampling; + startup_time = st->soc_info.startup_time; + tracktim = 0; + trackx = 0; + } + + at91_adc_setup_samp_freq(st->indio_dev, sample_rate, startup_time, + tracktim); + at91_adc_config_emr(st, oversampling_ratio, trackx); +} + +static int at91_adc_read_temp(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + struct at91_adc_temp_sensor_clb *clb = &st->soc_info.temp_sensor_clb; + u64 div1, div2; + u32 tmp; + int ret, vbg, vtemp; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + mutex_lock(&st->lock); + + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + goto unlock; + + at91_adc_temp_sensor_configure(st, true); + + /* Read VBG. */ + tmp = at91_adc_readl(st, ACR); + tmp |= AT91_SAMA5D2_ACR_SRCLCH; + at91_adc_writel(st, ACR, tmp); + ret = at91_adc_read_info_raw(indio_dev, chan, &vbg); + if (ret < 0) + goto restore_config; + + /* Read VTEMP. */ + tmp &= ~AT91_SAMA5D2_ACR_SRCLCH; + at91_adc_writel(st, ACR, tmp); + ret = at91_adc_read_info_raw(indio_dev, chan, &vtemp); + +restore_config: + /* Revert previous settings. */ + at91_adc_temp_sensor_configure(st, false); + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); +unlock: + mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); + if (ret < 0) + return ret; + + /* + * Temp[milli] = p1[milli] + (vtemp * clb->p6 - clb->p4 * vbg)/ + * (vbg * AT91_ADC_TS_VTEMP_DT) + */ + div1 = DIV_ROUND_CLOSEST_ULL(((u64)vtemp * clb->p6), vbg); + div1 = DIV_ROUND_CLOSEST_ULL((div1 * 1000), AT91_ADC_TS_VTEMP_DT); + div2 = DIV_ROUND_CLOSEST_ULL((u64)clb->p4, AT91_ADC_TS_VTEMP_DT); + div2 *= 1000; + *val = clb->p1 + (int)div1 - (int)div2; + return ret; } @@ -1611,7 +1927,8 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: - return at91_adc_read_info_raw(indio_dev, chan, val); + return at91_adc_read_info_locked(indio_dev, chan, val); + case IIO_CHAN_INFO_SCALE: *val = st->vref_uv / 1000; if (chan->differential) @@ -1619,6 +1936,11 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev, *val2 = chan->scan_type.realbits; return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_PROCESSED: + if (chan->type != IIO_TEMP) + return -EINVAL; + return at91_adc_read_temp(indio_dev, chan, val); + case IIO_CHAN_INFO_SAMP_FREQ: *val = at91_adc_get_sample_freq(st); return IIO_VAL_INT; @@ -1637,31 +1959,60 @@ static int at91_adc_write_raw(struct iio_dev *indio_dev, int val, int val2, long mask) { struct at91_adc_state *st = iio_priv(indio_dev); + int ret; switch (mask) { case IIO_CHAN_INFO_OVERSAMPLING_RATIO: - if ((val != AT91_OSR_1SAMPLES) && (val != AT91_OSR_4SAMPLES) && - (val != AT91_OSR_16SAMPLES)) - return -EINVAL; /* if no change, optimize out */ if (val == st->oversampling_ratio) return 0; - st->oversampling_ratio = val; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + mutex_lock(&st->lock); /* update ratio */ - at91_adc_config_emr(st); - return 0; + ret = at91_adc_config_emr(st, val, 0); + mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); + return ret; case IIO_CHAN_INFO_SAMP_FREQ: if (val < st->soc_info.min_sample_rate || val > st->soc_info.max_sample_rate) return -EINVAL; - at91_adc_setup_samp_freq(indio_dev, val); + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + mutex_lock(&st->lock); + at91_adc_setup_samp_freq(indio_dev, val, + st->soc_info.startup_time, 0); + mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); return 0; default: return -EINVAL; } } +static int at91_adc_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *vals = (int *)st->soc_info.platform->oversampling_avail; + *type = IIO_VAL_INT; + *length = st->soc_info.platform->oversampling_avail_no; + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + static void at91_adc_dma_init(struct at91_adc_state *st) { struct device *dev = &st->indio_dev->dev; @@ -1817,10 +2168,11 @@ static void at91_adc_hw_init(struct iio_dev *indio_dev) at91_adc_writel(st, MR, AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH); - at91_adc_setup_samp_freq(indio_dev, st->soc_info.min_sample_rate); + at91_adc_setup_samp_freq(indio_dev, st->soc_info.min_sample_rate, + st->soc_info.startup_time, 0); /* configure extended mode register */ - at91_adc_config_emr(st); + at91_adc_config_emr(st, st->oversampling_ratio, 0); } static ssize_t at91_adc_get_fifo_state(struct device *dev, @@ -1849,20 +2201,6 @@ static IIO_DEVICE_ATTR(hwfifo_watermark, 0444, static IIO_CONST_ATTR(hwfifo_watermark_min, "2"); static IIO_CONST_ATTR(hwfifo_watermark_max, AT91_HWFIFO_MAX_SIZE_STR); -static IIO_CONST_ATTR(oversampling_ratio_available, - __stringify(AT91_OSR_1SAMPLES) " " - __stringify(AT91_OSR_4SAMPLES) " " - __stringify(AT91_OSR_16SAMPLES)); - -static struct attribute *at91_adc_attributes[] = { - &iio_const_attr_oversampling_ratio_available.dev_attr.attr, - NULL, -}; - -static const struct attribute_group at91_adc_attribute_group = { - .attrs = at91_adc_attributes, -}; - static const struct attribute *at91_adc_fifo_attributes[] = { &iio_const_attr_hwfifo_watermark_min.dev_attr.attr, &iio_const_attr_hwfifo_watermark_max.dev_attr.attr, @@ -1872,11 +2210,11 @@ static const struct attribute *at91_adc_fifo_attributes[] = { }; static const struct iio_info at91_adc_info = { - .attrs = &at91_adc_attribute_group, + .read_avail = &at91_adc_read_avail, .read_raw = &at91_adc_read_raw, .write_raw = &at91_adc_write_raw, .update_scan_mode = &at91_adc_update_scan_mode, - .of_xlate = &at91_adc_of_xlate, + .fwnode_xlate = &at91_adc_fwnode_xlate, .hwfifo_set_watermark = &at91_adc_set_watermark, }; @@ -1918,12 +2256,62 @@ static int at91_adc_buffer_and_trigger_init(struct device *dev, return 0; } +static int at91_adc_temp_sensor_init(struct at91_adc_state *st, + struct device *dev) +{ + struct at91_adc_temp_sensor_clb *clb = &st->soc_info.temp_sensor_clb; + struct nvmem_cell *temp_calib; + u32 *buf; + size_t len; + int ret = 0; + + if (!st->soc_info.platform->temp_sensor) + return 0; + + /* Get the calibration data from NVMEM. */ + temp_calib = devm_nvmem_cell_get(dev, "temperature_calib"); + if (IS_ERR(temp_calib)) { + ret = PTR_ERR(temp_calib); + if (ret != -ENOENT) + dev_err(dev, "Failed to get temperature_calib cell!\n"); + return ret; + } + + buf = nvmem_cell_read(temp_calib, &len); + if (IS_ERR(buf)) { + dev_err(dev, "Failed to read calibration data!\n"); + return PTR_ERR(buf); + } + if (len < AT91_ADC_TS_CLB_IDX_MAX * 4) { + dev_err(dev, "Invalid calibration data!\n"); + ret = -EINVAL; + goto free_buf; + } + + /* Store calibration data for later use. */ + clb->p1 = buf[AT91_ADC_TS_CLB_IDX_P1]; + clb->p4 = buf[AT91_ADC_TS_CLB_IDX_P4]; + clb->p6 = buf[AT91_ADC_TS_CLB_IDX_P6]; + + /* + * We prepare here the conversion to milli and also add constant + * factor (5 degrees Celsius) to p1 here to avoid doing it on + * hotpath. + */ + clb->p1 = clb->p1 * 1000 + 5000; + +free_buf: + kfree(buf); + return ret; +} + static int at91_adc_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; struct iio_dev *indio_dev; struct at91_adc_state *st; struct resource *res; - int ret, i; + int ret, i, num_channels; u32 edge_type = IRQ_TYPE_NONE; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); @@ -1933,13 +2321,20 @@ static int at91_adc_probe(struct platform_device *pdev) st = iio_priv(indio_dev); st->indio_dev = indio_dev; - st->soc_info.platform = of_device_get_match_data(&pdev->dev); + st->soc_info.platform = device_get_match_data(dev); + + ret = at91_adc_temp_sensor_init(st, &pdev->dev); + /* Don't register temperature channel if initialization failed. */ + if (ret) + num_channels = st->soc_info.platform->max_channels - 1; + else + num_channels = st->soc_info.platform->max_channels; indio_dev->name = dev_name(&pdev->dev); indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; indio_dev->info = &at91_adc_info; indio_dev->channels = *st->soc_info.platform->adc_channels; - indio_dev->num_channels = st->soc_info.platform->max_channels; + indio_dev->num_channels = num_channels; bitmap_set(&st->touch_st.channels_bitmask, st->soc_info.platform->touch_chan_x, 1); @@ -1948,36 +2343,34 @@ static int at91_adc_probe(struct platform_device *pdev) bitmap_set(&st->touch_st.channels_bitmask, st->soc_info.platform->touch_chan_p, 1); - st->oversampling_ratio = AT91_OSR_1SAMPLES; + st->oversampling_ratio = 1; - ret = of_property_read_u32(pdev->dev.of_node, - "atmel,min-sample-rate-hz", - &st->soc_info.min_sample_rate); + ret = device_property_read_u32(dev, "atmel,min-sample-rate-hz", + &st->soc_info.min_sample_rate); if (ret) { dev_err(&pdev->dev, "invalid or missing value for atmel,min-sample-rate-hz\n"); return ret; } - ret = of_property_read_u32(pdev->dev.of_node, - "atmel,max-sample-rate-hz", - &st->soc_info.max_sample_rate); + ret = device_property_read_u32(dev, "atmel,max-sample-rate-hz", + &st->soc_info.max_sample_rate); if (ret) { dev_err(&pdev->dev, "invalid or missing value for atmel,max-sample-rate-hz\n"); return ret; } - ret = of_property_read_u32(pdev->dev.of_node, "atmel,startup-time-ms", - &st->soc_info.startup_time); + ret = device_property_read_u32(dev, "atmel,startup-time-ms", + &st->soc_info.startup_time); if (ret) { dev_err(&pdev->dev, "invalid or missing value for atmel,startup-time-ms\n"); return ret; } - ret = of_property_read_u32(pdev->dev.of_node, - "atmel,trigger-edge-type", &edge_type); + ret = device_property_read_u32(dev, "atmel,trigger-edge-type", + &edge_type); if (ret) { dev_dbg(&pdev->dev, "atmel,trigger-edge-type not specified, only software trigger available\n"); @@ -2051,13 +2444,19 @@ static int at91_adc_probe(struct platform_device *pdev) if (ret) goto vref_disable; - at91_adc_hw_init(indio_dev); - platform_set_drvdata(pdev, indio_dev); + st->dev = &pdev->dev; + pm_runtime_set_autosuspend_delay(st->dev, 500); + pm_runtime_use_autosuspend(st->dev); + pm_runtime_set_active(st->dev); + pm_runtime_enable(st->dev); + pm_runtime_get_noresume(st->dev); + + at91_adc_hw_init(indio_dev); ret = at91_adc_buffer_and_trigger_init(&pdev->dev, indio_dev); if (ret < 0) - goto per_clk_disable_unprepare; + goto err_pm_disable; if (dma_coerce_mask_and_coherent(&indio_dev->dev, DMA_BIT_MASK(32))) dev_info(&pdev->dev, "cannot set DMA mask to 32-bit\n"); @@ -2073,11 +2472,18 @@ static int at91_adc_probe(struct platform_device *pdev) dev_info(&pdev->dev, "version: %x\n", readl_relaxed(st->base + st->soc_info.platform->layout->VERSION)); + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); + return 0; dma_disable: at91_adc_dma_disable(st); -per_clk_disable_unprepare: +err_pm_disable: + pm_runtime_put_noidle(st->dev); + pm_runtime_disable(st->dev); + pm_runtime_set_suspended(st->dev); + pm_runtime_dont_use_autosuspend(st->dev); clk_disable_unprepare(st->per_clk); vref_disable: regulator_disable(st->vref); @@ -2095,6 +2501,8 @@ static int at91_adc_remove(struct platform_device *pdev) at91_adc_dma_disable(st); + pm_runtime_disable(st->dev); + pm_runtime_set_suspended(st->dev); clk_disable_unprepare(st->per_clk); regulator_disable(st->vref); @@ -2107,6 +2515,14 @@ static int at91_adc_suspend(struct device *dev) { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct at91_adc_state *st = iio_priv(indio_dev); + int ret; + + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return ret; + + if (iio_buffer_enabled(indio_dev)) + at91_adc_buffer_postdisable(indio_dev); /* * Do a sofware reset of the ADC before we go to suspend. @@ -2116,6 +2532,8 @@ static int at91_adc_suspend(struct device *dev) */ at91_adc_writel(st, CR, AT91_SAMA5D2_CR_SWRST); + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_noidle(st->dev); clk_disable_unprepare(st->per_clk); regulator_disable(st->vref); regulator_disable(st->reg); @@ -2145,21 +2563,28 @@ static int at91_adc_resume(struct device *dev) if (ret) goto vref_disable_resume; + pm_runtime_get_noresume(st->dev); + at91_adc_hw_init(indio_dev); /* reconfiguring trigger hardware state */ - if (!iio_buffer_enabled(indio_dev)) - return 0; + if (iio_buffer_enabled(indio_dev)) { + ret = at91_adc_buffer_prepare(indio_dev); + if (ret) + goto pm_runtime_put; - /* check if we are enabling triggered buffer or the touchscreen */ - if (at91_adc_current_chan_is_touch(indio_dev)) - return at91_adc_configure_touch(st, true); - else - return at91_adc_configure_trigger(st->trig, true); + at91_adc_configure_trigger_registers(st, true); + } + + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); - /* not needed but more explicit */ return 0; +pm_runtime_put: + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_noidle(st->dev); + clk_disable_unprepare(st->per_clk); vref_disable_resume: regulator_disable(st->vref); reg_disable_resume: @@ -2169,8 +2594,29 @@ resume_failed: return ret; } -static DEFINE_SIMPLE_DEV_PM_OPS(at91_adc_pm_ops, at91_adc_suspend, - at91_adc_resume); +static int at91_adc_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct at91_adc_state *st = iio_priv(indio_dev); + + clk_disable(st->per_clk); + + return 0; +} + +static int at91_adc_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct at91_adc_state *st = iio_priv(indio_dev); + + return clk_enable(st->per_clk); +} + +static const struct dev_pm_ops at91_adc_pm_ops = { + SYSTEM_SLEEP_PM_OPS(at91_adc_suspend, at91_adc_resume) + RUNTIME_PM_OPS(at91_adc_runtime_suspend, at91_adc_runtime_resume, + NULL) +}; static const struct of_device_id at91_adc_dt_match[] = { { @@ -2191,7 +2637,7 @@ static struct platform_driver at91_adc_driver = { .driver = { .name = "at91-sama5d2_adc", .of_match_table = at91_adc_dt_match, - .pm = pm_sleep_ptr(&at91_adc_pm_ops), + .pm = pm_ptr(&at91_adc_pm_ops), }, }; module_platform_driver(at91_adc_driver) diff --git a/drivers/iio/adc/imx8qxp-adc.c b/drivers/iio/adc/imx8qxp-adc.c index e48446784a0a..36777b827165 100644 --- a/drivers/iio/adc/imx8qxp-adc.c +++ b/drivers/iio/adc/imx8qxp-adc.c @@ -202,7 +202,7 @@ static int imx8qxp_adc_read_raw(struct iio_dev *indio_dev, struct imx8qxp_adc *adc = iio_priv(indio_dev); struct device *dev = adc->dev; - u32 ctrl, vref_uv; + u32 ctrl; long ret; switch (mask) { @@ -245,8 +245,10 @@ static int imx8qxp_adc_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: - vref_uv = regulator_get_voltage(adc->vref); - *val = vref_uv / 1000; + ret = regulator_get_voltage(adc->vref); + if (ret < 0) + return ret; + *val = ret / 1000; *val2 = 12; return IIO_VAL_FRACTIONAL_LOG2; diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c index bf5c03c34f84..a7325dbbb99a 100644 --- a/drivers/iio/adc/ingenic-adc.c +++ b/drivers/iio/adc/ingenic-adc.c @@ -719,12 +719,12 @@ static int ingenic_adc_read_raw(struct iio_dev *iio_dev, } } -static int ingenic_adc_of_xlate(struct iio_dev *iio_dev, - const struct of_phandle_args *iiospec) +static int ingenic_adc_fwnode_xlate(struct iio_dev *iio_dev, + const struct fwnode_reference_args *iiospec) { int i; - if (!iiospec->args_count) + if (!iiospec->nargs) return -EINVAL; for (i = 0; i < iio_dev->num_channels; ++i) @@ -734,16 +734,11 @@ static int ingenic_adc_of_xlate(struct iio_dev *iio_dev, return -EINVAL; } -static void ingenic_adc_clk_cleanup(void *data) -{ - clk_unprepare(data); -} - static const struct iio_info ingenic_adc_info = { .write_raw = ingenic_adc_write_raw, .read_raw = ingenic_adc_read_raw, .read_avail = ingenic_adc_read_avail, - .of_xlate = ingenic_adc_of_xlate, + .fwnode_xlate = ingenic_adc_fwnode_xlate, }; static int ingenic_adc_buffer_enable(struct iio_dev *iio_dev) @@ -858,13 +853,13 @@ static int ingenic_adc_probe(struct platform_device *pdev) if (IS_ERR(adc->base)) return PTR_ERR(adc->base); - adc->clk = devm_clk_get(dev, "adc"); + adc->clk = devm_clk_get_prepared(dev, "adc"); if (IS_ERR(adc->clk)) { dev_err(dev, "Unable to get clock\n"); return PTR_ERR(adc->clk); } - ret = clk_prepare_enable(adc->clk); + ret = clk_enable(adc->clk); if (ret) { dev_err(dev, "Failed to enable clock\n"); return ret; @@ -893,12 +888,6 @@ static int ingenic_adc_probe(struct platform_device *pdev) usleep_range(2000, 3000); /* Must wait at least 2ms. */ clk_disable(adc->clk); - ret = devm_add_action_or_reset(dev, ingenic_adc_clk_cleanup, adc->clk); - if (ret) { - dev_err(dev, "Unable to add action\n"); - return ret; - } - iio_dev->name = "jz-adc"; iio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; iio_dev->setup_ops = &ingenic_buffer_setup_ops; diff --git a/drivers/iio/adc/lpc18xx_adc.c b/drivers/iio/adc/lpc18xx_adc.c index 42e6cd6fa6f7..450a243d1f7c 100644 --- a/drivers/iio/adc/lpc18xx_adc.c +++ b/drivers/iio/adc/lpc18xx_adc.c @@ -121,11 +121,6 @@ static void lpc18xx_clear_cr_reg(void *data) writel(0, adc->base + LPC18XX_ADC_CR); } -static void lpc18xx_clk_disable(void *clk) -{ - clk_disable_unprepare(clk); -} - static void lpc18xx_regulator_disable(void *vref) { regulator_disable(vref); @@ -151,7 +146,7 @@ static int lpc18xx_adc_probe(struct platform_device *pdev) if (IS_ERR(adc->base)) return PTR_ERR(adc->base); - adc->clk = devm_clk_get(&pdev->dev, NULL); + adc->clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(adc->clk)) return dev_err_probe(&pdev->dev, PTR_ERR(adc->clk), "error getting clock\n"); @@ -177,17 +172,6 @@ static int lpc18xx_adc_probe(struct platform_device *pdev) if (ret) return ret; - ret = clk_prepare_enable(adc->clk); - if (ret) { - dev_err(&pdev->dev, "unable to enable clock\n"); - return ret; - } - - ret = devm_add_action_or_reset(&pdev->dev, lpc18xx_clk_disable, - adc->clk); - if (ret) - return ret; - rate = clk_get_rate(adc->clk); clkdiv = DIV_ROUND_UP(rate, LPC18XX_ADC_CLK_TARGET); diff --git a/drivers/iio/adc/max11205.c b/drivers/iio/adc/max11205.c new file mode 100644 index 000000000000..65fc32971ba5 --- /dev/null +++ b/drivers/iio/adc/max11205.c @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Maxim MAX11205 16-Bit Delta-Sigma ADC + * + * Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-max11205.pdf + * Copyright (C) 2022 Analog Devices, Inc. + * Author: Ramona Bolboaca + */ + +#include +#include +#include +#include + +#include +#include + +#define MAX11205_BIT_SCALE 15 +#define MAX11205A_OUT_DATA_RATE 116 +#define MAX11205B_OUT_DATA_RATE 13 + +enum max11205_chip_type { + TYPE_MAX11205A, + TYPE_MAX11205B, +}; + +struct max11205_chip_info { + unsigned int out_data_rate; + const char *name; +}; + +struct max11205_state { + const struct max11205_chip_info *chip_info; + struct regulator *vref; + struct ad_sigma_delta sd; +}; + +static const struct ad_sigma_delta_info max11205_sigma_delta_info = { + .has_registers = false, +}; + +static int max11205_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct max11205_state *st = iio_priv(indio_dev); + int reg_mv; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return ad_sigma_delta_single_conversion(indio_dev, chan, val); + case IIO_CHAN_INFO_SCALE: + reg_mv = regulator_get_voltage(st->vref); + if (reg_mv < 0) + return reg_mv; + reg_mv /= 1000; + *val = reg_mv; + *val2 = MAX11205_BIT_SCALE; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = st->chip_info->out_data_rate; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static const struct iio_info max11205_iio_info = { + .read_raw = max11205_read_raw, + .validate_trigger = ad_sd_validate_trigger, +}; + +static const struct iio_chan_spec max11205_channels[] = { + { + .type = IIO_VOLTAGE, + .indexed = 1, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_SCALE), + }, +}; + +static const struct max11205_chip_info max11205_chip_info[] = { + [TYPE_MAX11205A] = { + .out_data_rate = MAX11205A_OUT_DATA_RATE, + .name = "max11205a", + }, + [TYPE_MAX11205B] = { + .out_data_rate = MAX11205B_OUT_DATA_RATE, + .name = "max11205b", + }, +}; + +static void max11205_reg_disable(void *reg) +{ + regulator_disable(reg); +} + +static int max11205_probe(struct spi_device *spi) +{ + struct max11205_state *st; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + + ad_sd_init(&st->sd, indio_dev, spi, &max11205_sigma_delta_info); + + st->chip_info = device_get_match_data(&spi->dev); + if (!st->chip_info) + st->chip_info = + (const struct max11205_chip_info *)spi_get_device_id(spi)->driver_data; + + indio_dev->name = st->chip_info->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = max11205_channels; + indio_dev->num_channels = 1; + indio_dev->info = &max11205_iio_info; + + st->vref = devm_regulator_get(&spi->dev, "vref"); + if (IS_ERR(st->vref)) + return dev_err_probe(&spi->dev, PTR_ERR(st->vref), + "Failed to get vref regulator\n"); + + ret = regulator_enable(st->vref); + if (ret) + return ret; + + ret = devm_add_action_or_reset(&spi->dev, max11205_reg_disable, st->vref); + if (ret) + return ret; + + ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev); + if (ret) + return ret; + + return devm_iio_device_register(&spi->dev, indio_dev); +} + +static const struct spi_device_id max11205_spi_ids[] = { + { "max11205a", (kernel_ulong_t)&max11205_chip_info[TYPE_MAX11205A] }, + { "max11205b", (kernel_ulong_t)&max11205_chip_info[TYPE_MAX11205B] }, + { } +}; +MODULE_DEVICE_TABLE(spi, max11205_spi_ids); + +static const struct of_device_id max11205_dt_ids[] = { + { + .compatible = "maxim,max11205a", + .data = &max11205_chip_info[TYPE_MAX11205A], + }, + { + .compatible = "maxim,max11205b", + .data = &max11205_chip_info[TYPE_MAX11205B], + }, + { } +}; +MODULE_DEVICE_TABLE(of, max11205_dt_ids); + +static struct spi_driver max11205_spi_driver = { + .driver = { + .name = "max11205", + .of_match_table = max11205_dt_ids, + }, + .probe = max11205_probe, + .id_table = max11205_spi_ids, +}; +module_spi_driver(max11205_spi_driver); + +MODULE_AUTHOR("Ramona Bolboaca "); +MODULE_DESCRIPTION("MAX11205 ADC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_AD_SIGMA_DELTA); diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index eef55ed4814a..a28cf86cdce8 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include #include @@ -1595,11 +1594,6 @@ static int max1363_probe(struct i2c_client *client, if (!indio_dev) return -ENOMEM; - ret = devm_iio_map_array_register(&client->dev, indio_dev, - client->dev.platform_data); - if (ret < 0) - return ret; - st = iio_priv(indio_dev); mutex_init(&st->lock); diff --git a/drivers/iio/adc/mt6360-adc.c b/drivers/iio/adc/mt6360-adc.c index 35260d9e4e47..3710473e526f 100644 --- a/drivers/iio/adc/mt6360-adc.c +++ b/drivers/iio/adc/mt6360-adc.c @@ -353,7 +353,7 @@ static int mt6360_adc_probe(struct platform_device *pdev) return devm_iio_device_register(&pdev->dev, indio_dev); } -static const struct of_device_id __maybe_unused mt6360_adc_of_id[] = { +static const struct of_device_id mt6360_adc_of_id[] = { { .compatible = "mediatek,mt6360-adc", }, {} }; diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c index 5e9e56821075..eb424496ee1d 100644 --- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c +++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c @@ -14,9 +14,9 @@ #include #include #include -#include -#include +#include #include +#include #include #include #include @@ -694,8 +694,8 @@ static int pm8xxx_read_raw(struct iio_dev *indio_dev, } } -static int pm8xxx_of_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static int pm8xxx_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { struct pm8xxx_xoadc *adc = iio_priv(indio_dev); u8 pre_scale_mux; @@ -706,10 +706,10 @@ static int pm8xxx_of_xlate(struct iio_dev *indio_dev, * First cell is prescaler or premux, second cell is analog * mux. */ - if (iiospec->args_count != 2) { - dev_err(&indio_dev->dev, "wrong number of arguments for %pOFn need 2 got %d\n", - iiospec->np, - iiospec->args_count); + if (iiospec->nargs != 2) { + dev_err(&indio_dev->dev, "wrong number of arguments for %pfwP need 2 got %d\n", + iiospec->fwnode, + iiospec->nargs); return -EINVAL; } pre_scale_mux = (u8)iiospec->args[0]; @@ -727,34 +727,34 @@ static int pm8xxx_of_xlate(struct iio_dev *indio_dev, } static const struct iio_info pm8xxx_xoadc_info = { - .of_xlate = pm8xxx_of_xlate, + .fwnode_xlate = pm8xxx_fwnode_xlate, .read_raw = pm8xxx_read_raw, }; static int pm8xxx_xoadc_parse_channel(struct device *dev, - struct device_node *np, + struct fwnode_handle *fwnode, const struct xoadc_channel *hw_channels, struct iio_chan_spec *iio_chan, struct pm8xxx_chan_info *ch) { - const char *name = np->name; + const char *name = fwnode_get_name(fwnode); const struct xoadc_channel *hwchan; - u32 pre_scale_mux, amux_channel; + u32 pre_scale_mux, amux_channel, reg[2]; u32 rsv, dec; int ret; int chid; - ret = of_property_read_u32_index(np, "reg", 0, &pre_scale_mux); + ret = fwnode_property_read_u32_array(fwnode, "reg", reg, + ARRAY_SIZE(reg)); if (ret) { - dev_err(dev, "invalid pre scale/mux number %s\n", name); - return ret; - } - ret = of_property_read_u32_index(np, "reg", 1, &amux_channel); - if (ret) { - dev_err(dev, "invalid amux channel number %s\n", name); + dev_err(dev, "invalid pre scale/mux or amux channel number %s\n", + name); return ret; } + pre_scale_mux = reg[0]; + amux_channel = reg[1]; + /* Find the right channel setting */ chid = 0; hwchan = &hw_channels[0]; @@ -778,7 +778,7 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev, /* Everyone seems to use default ("type 2") decimation */ ch->decimation = VADC_DEF_DECIMATION; - if (!of_property_read_u32(np, "qcom,ratiometric", &rsv)) { + if (!fwnode_property_read_u32(fwnode, "qcom,ratiometric", &rsv)) { ch->calibration = VADC_CALIB_RATIOMETRIC; if (rsv > XOADC_RSV_MAX) { dev_err(dev, "%s too large RSV value %d\n", name, rsv); @@ -791,7 +791,7 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev, } /* Optional decimation, if omitted we use the default */ - ret = of_property_read_u32(np, "qcom,decimation", &dec); + ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &dec); if (!ret) { ret = qcom_vadc_decimation_from_dt(dec); if (ret < 0) { @@ -820,15 +820,14 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev, return 0; } -static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc, - struct device_node *np) +static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc) { - struct device_node *child; + struct fwnode_handle *child; struct pm8xxx_chan_info *ch; int ret; int i; - adc->nchans = of_get_available_child_count(np); + adc->nchans = device_get_child_node_count(adc->dev); if (!adc->nchans) { dev_err(adc->dev, "no channel children\n"); return -ENODEV; @@ -846,14 +845,14 @@ static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc, return -ENOMEM; i = 0; - for_each_available_child_of_node(np, child) { + device_for_each_child_node(adc->dev, child) { ch = &adc->chans[i]; ret = pm8xxx_xoadc_parse_channel(adc->dev, child, adc->variant->channels, &adc->iio_chans[i], ch); if (ret) { - of_node_put(child); + fwnode_handle_put(child); return ret; } i++; @@ -884,12 +883,11 @@ static int pm8xxx_xoadc_probe(struct platform_device *pdev) const struct xoadc_variant *variant; struct pm8xxx_xoadc *adc; struct iio_dev *indio_dev; - struct device_node *np = pdev->dev.of_node; struct regmap *map; struct device *dev = &pdev->dev; int ret; - variant = of_device_get_match_data(dev); + variant = device_get_match_data(dev); if (!variant) return -ENODEV; @@ -904,7 +902,7 @@ static int pm8xxx_xoadc_probe(struct platform_device *pdev) init_completion(&adc->complete); mutex_init(&adc->lock); - ret = pm8xxx_xoadc_parse_channels(adc, np); + ret = pm8xxx_xoadc_parse_channels(adc); if (ret) return ret; diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c index 87438d1e5c0b..821fee60a765 100644 --- a/drivers/iio/adc/qcom-spmi-adc5.c +++ b/drivers/iio/adc/qcom-spmi-adc5.c @@ -14,9 +14,9 @@ #include #include #include -#include -#include +#include #include +#include #include #include @@ -403,8 +403,8 @@ static irqreturn_t adc5_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int adc5_of_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static int adc5_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { struct adc5_chip *adc = iio_priv(indio_dev); int i; @@ -416,8 +416,8 @@ static int adc5_of_xlate(struct iio_dev *indio_dev, return -EINVAL; } -static int adc7_of_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static int adc7_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { struct adc5_chip *adc = iio_priv(indio_dev); int i, v_channel; @@ -481,12 +481,12 @@ static int adc7_read_raw(struct iio_dev *indio_dev, static const struct iio_info adc5_info = { .read_raw = adc5_read_raw, - .of_xlate = adc5_of_xlate, + .fwnode_xlate = adc5_fwnode_xlate, }; static const struct iio_info adc7_info = { .read_raw = adc7_read_raw, - .of_xlate = adc7_of_xlate, + .fwnode_xlate = adc7_fwnode_xlate, }; struct adc5_channels { @@ -526,6 +526,8 @@ static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = { SCALE_HW_CALIB_DEFAULT) [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1, SCALE_HW_CALIB_DEFAULT) + [ADC5_VCOIN] = ADC5_CHAN_VOLT("vcoin", 1, + SCALE_HW_CALIB_DEFAULT) [ADC5_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 0, SCALE_HW_CALIB_PMIC_THERM) [ADC5_USB_IN_I] = ADC5_CHAN_VOLT("usb_in_i_uv", 0, @@ -549,6 +551,12 @@ static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = { SCALE_HW_CALIB_THERM_100K_PULLUP) [ADC5_AMUX_THM2] = ADC5_CHAN_TEMP("amux_thm2", 0, SCALE_HW_CALIB_PM5_SMB_TEMP) + [ADC5_GPIO1_100K_PU] = ADC5_CHAN_TEMP("gpio1_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) + [ADC5_GPIO3_100K_PU] = ADC5_CHAN_TEMP("gpio3_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) + [ADC5_GPIO4_100K_PU] = ADC5_CHAN_TEMP("gpio4_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) }; static const struct adc5_channels adc7_chans_pmic[ADC5_MAX_CHANNEL] = { @@ -589,6 +597,8 @@ static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = { SCALE_HW_CALIB_DEFAULT) [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0, SCALE_HW_CALIB_DEFAULT) + [ADC5_VREF_VADC] = ADC5_CHAN_VOLT("vref_vadc", 0, + SCALE_HW_CALIB_DEFAULT) [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1, SCALE_HW_CALIB_DEFAULT) [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1, @@ -611,18 +621,18 @@ static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = { SCALE_HW_CALIB_THERM_100K_PULLUP) }; -static int adc5_get_dt_channel_data(struct adc5_chip *adc, +static int adc5_get_fw_channel_data(struct adc5_chip *adc, struct adc5_channel_prop *prop, - struct device_node *node, + struct fwnode_handle *fwnode, const struct adc5_data *data) { - const char *name = node->name, *channel_name; + const char *name = fwnode_get_name(fwnode), *channel_name; u32 chan, value, varr[2]; u32 sid = 0; int ret; struct device *dev = adc->dev; - ret = of_property_read_u32(node, "reg", &chan); + ret = fwnode_property_read_u32(fwnode, "reg", &chan); if (ret) { dev_err(dev, "invalid channel number %s\n", name); return ret; @@ -647,15 +657,13 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc, prop->channel = chan; prop->sid = sid; - channel_name = of_get_property(node, - "label", NULL) ? : node->name; - if (!channel_name) { - dev_err(dev, "Invalid channel name\n"); - return -EINVAL; - } + ret = fwnode_property_read_string(fwnode, "label", &channel_name); + if (ret) + channel_name = name; + prop->datasheet_name = channel_name; - ret = of_property_read_u32(node, "qcom,decimation", &value); + ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &value); if (!ret) { ret = qcom_adc5_decimation_from_dt(value, data->decimation); if (ret < 0) { @@ -668,7 +676,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc, prop->decimation = ADC5_DECIMATION_DEFAULT; } - ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2); + ret = fwnode_property_read_u32_array(fwnode, "qcom,pre-scaling", varr, 2); if (!ret) { ret = qcom_adc5_prescaling_from_dt(varr[0], varr[1]); if (ret < 0) { @@ -682,7 +690,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc, adc->data->adc_chans[prop->channel].prescale_index; } - ret = of_property_read_u32(node, "qcom,hw-settle-time", &value); + ret = fwnode_property_read_u32(fwnode, "qcom,hw-settle-time", &value); if (!ret) { u8 dig_version[2]; @@ -713,7 +721,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc, prop->hw_settle_time = VADC_DEF_HW_SETTLE_TIME; } - ret = of_property_read_u32(node, "qcom,avg-samples", &value); + ret = fwnode_property_read_u32(fwnode, "qcom,avg-samples", &value); if (!ret) { ret = qcom_adc5_avg_samples_from_dt(value); if (ret < 0) { @@ -726,7 +734,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc, prop->avg_samples = VADC_DEF_AVG_SAMPLES; } - if (of_property_read_bool(node, "qcom,ratiometric")) + if (fwnode_property_read_bool(fwnode, "qcom,ratiometric")) prop->cal_method = ADC5_RATIOMETRIC_CAL; else prop->cal_method = ADC5_ABSOLUTE_CAL; @@ -801,16 +809,16 @@ static const struct of_device_id adc5_match_table[] = { }; MODULE_DEVICE_TABLE(of, adc5_match_table); -static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node) +static int adc5_get_fw_data(struct adc5_chip *adc) { const struct adc5_channels *adc_chan; struct iio_chan_spec *iio_chan; struct adc5_channel_prop prop, *chan_props; - struct device_node *child; + struct fwnode_handle *child; unsigned int index = 0; int ret; - adc->nchannels = of_get_available_child_count(node); + adc->nchannels = device_get_child_node_count(adc->dev); if (!adc->nchannels) return -EINVAL; @@ -826,14 +834,14 @@ static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node) chan_props = adc->chan_props; iio_chan = adc->iio_chans; - adc->data = of_device_get_match_data(adc->dev); + adc->data = device_get_match_data(adc->dev); if (!adc->data) adc->data = &adc5_data_pmic; - for_each_available_child_of_node(node, child) { - ret = adc5_get_dt_channel_data(adc, &prop, child, adc->data); + device_for_each_child_node(adc->dev, child) { + ret = adc5_get_fw_channel_data(adc, &prop, child, adc->data); if (ret) { - of_node_put(child); + fwnode_handle_put(child); return ret; } @@ -858,7 +866,6 @@ static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node) static int adc5_probe(struct platform_device *pdev) { - struct device_node *node = pdev->dev.of_node; struct device *dev = &pdev->dev; struct iio_dev *indio_dev; struct adc5_chip *adc; @@ -870,7 +877,7 @@ static int adc5_probe(struct platform_device *pdev) if (!regmap) return -ENODEV; - ret = of_property_read_u32(node, "reg", ®); + ret = device_property_read_u32(dev, "reg", ®); if (ret < 0) return ret; @@ -886,7 +893,7 @@ static int adc5_probe(struct platform_device *pdev) init_completion(&adc->complete); mutex_init(&adc->lock); - ret = adc5_get_dt_data(adc, node); + ret = adc5_get_fw_data(adc); if (ret) { dev_err(dev, "adc get dt data failed\n"); return ret; diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c index 34202ba52469..bcff0f62b70e 100644 --- a/drivers/iio/adc/qcom-spmi-vadc.c +++ b/drivers/iio/adc/qcom-spmi-vadc.c @@ -13,8 +13,9 @@ #include #include #include -#include +#include #include +#include #include #include #include @@ -481,8 +482,8 @@ static int vadc_read_raw(struct iio_dev *indio_dev, return ret; } -static int vadc_of_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static int vadc_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { struct vadc_priv *vadc = iio_priv(indio_dev); unsigned int i; @@ -496,7 +497,7 @@ static int vadc_of_xlate(struct iio_dev *indio_dev, static const struct iio_info vadc_info = { .read_raw = vadc_read_raw, - .of_xlate = vadc_of_xlate, + .fwnode_xlate = vadc_fwnode_xlate, }; struct vadc_channels { @@ -647,15 +648,15 @@ static const struct vadc_channels vadc_chans[] = { VADC_CHAN_NO_SCALE(LR_MUX3_BUF_PU1_PU2_XO_THERM, 0) }; -static int vadc_get_dt_channel_data(struct device *dev, +static int vadc_get_fw_channel_data(struct device *dev, struct vadc_channel_prop *prop, - struct device_node *node) + struct fwnode_handle *fwnode) { - const char *name = node->name; + const char *name = fwnode_get_name(fwnode); u32 chan, value, varr[2]; int ret; - ret = of_property_read_u32(node, "reg", &chan); + ret = fwnode_property_read_u32(fwnode, "reg", &chan); if (ret) { dev_err(dev, "invalid channel number %s\n", name); return ret; @@ -669,7 +670,7 @@ static int vadc_get_dt_channel_data(struct device *dev, /* the channel has DT description */ prop->channel = chan; - ret = of_property_read_u32(node, "qcom,decimation", &value); + ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &value); if (!ret) { ret = qcom_vadc_decimation_from_dt(value); if (ret < 0) { @@ -682,7 +683,7 @@ static int vadc_get_dt_channel_data(struct device *dev, prop->decimation = VADC_DEF_DECIMATION; } - ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2); + ret = fwnode_property_read_u32_array(fwnode, "qcom,pre-scaling", varr, 2); if (!ret) { ret = vadc_prescaling_from_dt(varr[0], varr[1]); if (ret < 0) { @@ -695,7 +696,7 @@ static int vadc_get_dt_channel_data(struct device *dev, prop->prescale = vadc_chans[prop->channel].prescale_index; } - ret = of_property_read_u32(node, "qcom,hw-settle-time", &value); + ret = fwnode_property_read_u32(fwnode, "qcom,hw-settle-time", &value); if (!ret) { ret = vadc_hw_settle_time_from_dt(value); if (ret < 0) { @@ -708,7 +709,7 @@ static int vadc_get_dt_channel_data(struct device *dev, prop->hw_settle_time = VADC_DEF_HW_SETTLE_TIME; } - ret = of_property_read_u32(node, "qcom,avg-samples", &value); + ret = fwnode_property_read_u32(fwnode, "qcom,avg-samples", &value); if (!ret) { ret = vadc_avg_samples_from_dt(value); if (ret < 0) { @@ -721,7 +722,7 @@ static int vadc_get_dt_channel_data(struct device *dev, prop->avg_samples = VADC_DEF_AVG_SAMPLES; } - if (of_property_read_bool(node, "qcom,ratiometric")) + if (fwnode_property_read_bool(fwnode, "qcom,ratiometric")) prop->calibration = VADC_CALIB_RATIOMETRIC; else prop->calibration = VADC_CALIB_ABSOLUTE; @@ -731,16 +732,16 @@ static int vadc_get_dt_channel_data(struct device *dev, return 0; } -static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node) +static int vadc_get_fw_data(struct vadc_priv *vadc) { const struct vadc_channels *vadc_chan; struct iio_chan_spec *iio_chan; struct vadc_channel_prop prop; - struct device_node *child; + struct fwnode_handle *child; unsigned int index = 0; int ret; - vadc->nchannels = of_get_available_child_count(node); + vadc->nchannels = device_get_child_node_count(vadc->dev); if (!vadc->nchannels) return -EINVAL; @@ -756,10 +757,10 @@ static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node) iio_chan = vadc->iio_chans; - for_each_available_child_of_node(node, child) { - ret = vadc_get_dt_channel_data(vadc->dev, &prop, child); + device_for_each_child_node(vadc->dev, child) { + ret = vadc_get_fw_channel_data(vadc->dev, &prop, child); if (ret) { - of_node_put(child); + fwnode_handle_put(child); return ret; } @@ -848,7 +849,6 @@ static int vadc_check_revision(struct vadc_priv *vadc) static int vadc_probe(struct platform_device *pdev) { - struct device_node *node = pdev->dev.of_node; struct device *dev = &pdev->dev; struct iio_dev *indio_dev; struct vadc_priv *vadc; @@ -860,7 +860,7 @@ static int vadc_probe(struct platform_device *pdev) if (!regmap) return -ENODEV; - ret = of_property_read_u32(node, "reg", ®); + ret = device_property_read_u32(dev, "reg", ®); if (ret < 0) return ret; @@ -880,7 +880,7 @@ static int vadc_probe(struct platform_device *pdev) if (ret) return ret; - ret = vadc_get_dt_data(vadc, node); + ret = vadc_get_fw_data(vadc); if (ret) return ret; diff --git a/drivers/iio/adc/rtq6056.c b/drivers/iio/adc/rtq6056.c new file mode 100644 index 000000000000..c1b2e8dc9a26 --- /dev/null +++ b/drivers/iio/adc/rtq6056.c @@ -0,0 +1,661 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 Richtek Technology Corp. + * + * ChiYuan Huang + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define RTQ6056_REG_CONFIG 0x00 +#define RTQ6056_REG_SHUNTVOLT 0x01 +#define RTQ6056_REG_BUSVOLT 0x02 +#define RTQ6056_REG_POWER 0x03 +#define RTQ6056_REG_CURRENT 0x04 +#define RTQ6056_REG_CALIBRATION 0x05 +#define RTQ6056_REG_MASKENABLE 0x06 +#define RTQ6056_REG_ALERTLIMIT 0x07 +#define RTQ6056_REG_MANUFACTID 0xFE +#define RTQ6056_REG_DIEID 0xFF + +#define RTQ6056_VENDOR_ID 0x1214 +#define RTQ6056_DEFAULT_CONFIG 0x4127 +#define RTQ6056_CONT_ALLON 7 + +enum { + RTQ6056_CH_VSHUNT = 0, + RTQ6056_CH_VBUS, + RTQ6056_CH_POWER, + RTQ6056_CH_CURRENT, + RTQ6056_MAX_CHANNEL +}; + +enum { + F_OPMODE = 0, + F_VSHUNTCT, + F_VBUSCT, + F_AVG, + F_RESET, + F_MAX_FIELDS +}; + +struct rtq6056_priv { + struct device *dev; + struct regmap *regmap; + struct regmap_field *rm_fields[F_MAX_FIELDS]; + u32 shunt_resistor_uohm; + int vshuntct_us; + int vbusct_us; + int avg_sample; +}; + +static const struct reg_field rtq6056_reg_fields[F_MAX_FIELDS] = { + [F_OPMODE] = REG_FIELD(RTQ6056_REG_CONFIG, 0, 2), + [F_VSHUNTCT] = REG_FIELD(RTQ6056_REG_CONFIG, 3, 5), + [F_VBUSCT] = REG_FIELD(RTQ6056_REG_CONFIG, 6, 8), + [F_AVG] = REG_FIELD(RTQ6056_REG_CONFIG, 9, 11), + [F_RESET] = REG_FIELD(RTQ6056_REG_CONFIG, 15, 15), +}; + +static const struct iio_chan_spec rtq6056_channels[RTQ6056_MAX_CHANNEL + 1] = { + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 0, + .address = RTQ6056_REG_SHUNTVOLT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 1, + .address = RTQ6056_REG_BUSVOLT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 1, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_POWER, + .indexed = 1, + .channel = 2, + .address = RTQ6056_REG_POWER, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 2, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_CURRENT, + .indexed = 1, + .channel = 3, + .address = RTQ6056_REG_CURRENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 3, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(RTQ6056_MAX_CHANNEL), +}; + +static int rtq6056_adc_read_channel(struct rtq6056_priv *priv, + struct iio_chan_spec const *ch, + int *val) +{ + struct device *dev = priv->dev; + unsigned int addr = ch->address; + unsigned int regval; + int ret; + + pm_runtime_get_sync(dev); + ret = regmap_read(priv->regmap, addr, ®val); + pm_runtime_mark_last_busy(dev); + pm_runtime_put(dev); + if (ret) + return ret; + + /* Power and VBUS is unsigned 16-bit, others are signed 16-bit */ + if (addr == RTQ6056_REG_BUSVOLT || addr == RTQ6056_REG_POWER) + *val = regval; + else + *val = sign_extend32(regval, 16); + + return IIO_VAL_INT; +} + +static int rtq6056_adc_read_scale(struct iio_chan_spec const *ch, int *val, + int *val2) +{ + switch (ch->address) { + case RTQ6056_REG_SHUNTVOLT: + /* VSHUNT lsb 2.5uV */ + *val = 2500; + *val2 = 1000000; + return IIO_VAL_FRACTIONAL; + case RTQ6056_REG_BUSVOLT: + /* VBUS lsb 1.25mV */ + *val = 1250; + *val2 = 1000; + return IIO_VAL_FRACTIONAL; + case RTQ6056_REG_POWER: + /* Power lsb 25mW */ + *val = 25; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +/* + * Sample frequency for channel VSHUNT and VBUS. The indices correspond + * with the bit value expected by the chip. And it can be found at + * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf + */ +static const int rtq6056_samp_freq_list[] = { + 7194, 4926, 3717, 1904, 964, 485, 243, 122, +}; + +static int rtq6056_adc_set_samp_freq(struct rtq6056_priv *priv, + struct iio_chan_spec const *ch, int val) +{ + struct regmap_field *rm_field; + unsigned int selector; + int *ct, ret; + + if (val > 7194 || val < 122) + return -EINVAL; + + if (ch->address == RTQ6056_REG_SHUNTVOLT) { + rm_field = priv->rm_fields[F_VSHUNTCT]; + ct = &priv->vshuntct_us; + } else if (ch->address == RTQ6056_REG_BUSVOLT) { + rm_field = priv->rm_fields[F_VBUSCT]; + ct = &priv->vbusct_us; + } else + return -EINVAL; + + selector = find_closest_descending(val, rtq6056_samp_freq_list, + ARRAY_SIZE(rtq6056_samp_freq_list)); + + ret = regmap_field_write(rm_field, selector); + if (ret) + return ret; + + *ct = 1000000 / rtq6056_samp_freq_list[selector]; + + return 0; +} + +/* + * Available averaging rate for rtq6056. The indices correspond with the bit + * value expected by the chip. And it can be found at + * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf + */ +static const int rtq6056_avg_sample_list[] = { + 1, 4, 16, 64, 128, 256, 512, 1024, +}; + +static int rtq6056_adc_set_average(struct rtq6056_priv *priv, int val) +{ + unsigned int selector; + int ret; + + if (val > 1024 || val < 1) + return -EINVAL; + + selector = find_closest(val, rtq6056_avg_sample_list, + ARRAY_SIZE(rtq6056_avg_sample_list)); + + ret = regmap_field_write(priv->rm_fields[F_AVG], selector); + if (ret) + return ret; + + priv->avg_sample = rtq6056_avg_sample_list[selector]; + + return 0; +} + +static int rtq6056_adc_get_sample_freq(struct rtq6056_priv *priv, + struct iio_chan_spec const *ch, int *val) +{ + int sample_time; + + if (ch->address == RTQ6056_REG_SHUNTVOLT) + sample_time = priv->vshuntct_us; + else if (ch->address == RTQ6056_REG_BUSVOLT) + sample_time = priv->vbusct_us; + else { + sample_time = priv->vshuntct_us + priv->vbusct_us; + sample_time *= priv->avg_sample; + } + + *val = 1000000 / sample_time; + + return IIO_VAL_INT; +} + +static int rtq6056_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct rtq6056_priv *priv = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return rtq6056_adc_read_channel(priv, chan, val); + case IIO_CHAN_INFO_SCALE: + return rtq6056_adc_read_scale(chan, val, val2); + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *val = priv->avg_sample; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SAMP_FREQ: + return rtq6056_adc_get_sample_freq(priv, chan, val); + default: + return -EINVAL; + } +} + +static int rtq6056_adc_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + *vals = rtq6056_samp_freq_list; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(rtq6056_samp_freq_list); + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *vals = rtq6056_avg_sample_list; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(rtq6056_avg_sample_list); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static int rtq6056_adc_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct rtq6056_priv *priv = iio_priv(indio_dev); + int ret; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + ret = rtq6056_adc_set_samp_freq(priv, chan, val); + break; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + ret = rtq6056_adc_set_average(priv, val); + break; + default: + ret = -EINVAL; + break; + } + + iio_device_release_direct_mode(indio_dev); + + return ret; +} + +static const char *rtq6056_channel_labels[RTQ6056_MAX_CHANNEL] = { + [RTQ6056_CH_VSHUNT] = "Vshunt", + [RTQ6056_CH_VBUS] = "Vbus", + [RTQ6056_CH_POWER] = "Power", + [RTQ6056_CH_CURRENT] = "Current", +}; + +static int rtq6056_adc_read_label(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + char *label) +{ + return sysfs_emit(label, "%s\n", rtq6056_channel_labels[chan->channel]); +} + +static int rtq6056_set_shunt_resistor(struct rtq6056_priv *priv, + int resistor_uohm) +{ + unsigned int calib_val; + int ret; + + if (resistor_uohm <= 0) { + dev_err(priv->dev, "Invalid resistor [%d]\n", resistor_uohm); + return -EINVAL; + } + + /* calibration = 5120000 / (Rshunt (uOhm) * current lsb (1mA)) */ + calib_val = 5120000 / resistor_uohm; + ret = regmap_write(priv->regmap, RTQ6056_REG_CALIBRATION, calib_val); + if (ret) + return ret; + + priv->shunt_resistor_uohm = resistor_uohm; + + return 0; +} + +static ssize_t shunt_resistor_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct rtq6056_priv *priv = iio_priv(dev_to_iio_dev(dev)); + int vals[2] = { priv->shunt_resistor_uohm, 1000000 }; + + return iio_format_value(buf, IIO_VAL_FRACTIONAL, 1, vals); +} + +static ssize_t shunt_resistor_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct rtq6056_priv *priv = iio_priv(indio_dev); + int val, val_fract, ret; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = iio_str_to_fixpoint(buf, 100000, &val, &val_fract); + if (ret) + goto out_store; + + ret = rtq6056_set_shunt_resistor(priv, val * 1000000 + val_fract); + +out_store: + iio_device_release_direct_mode(indio_dev); + + return ret ?: len; +} + +static IIO_DEVICE_ATTR_RW(shunt_resistor, 0); + +static struct attribute *rtq6056_attributes[] = { + &iio_dev_attr_shunt_resistor.dev_attr.attr, + NULL +}; + +static const struct attribute_group rtq6056_attribute_group = { + .attrs = rtq6056_attributes, +}; + +static const struct iio_info rtq6056_info = { + .attrs = &rtq6056_attribute_group, + .read_raw = rtq6056_adc_read_raw, + .read_avail = rtq6056_adc_read_avail, + .write_raw = rtq6056_adc_write_raw, + .read_label = rtq6056_adc_read_label, +}; + +static irqreturn_t rtq6056_buffer_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct rtq6056_priv *priv = iio_priv(indio_dev); + struct device *dev = priv->dev; + struct { + u16 vals[RTQ6056_MAX_CHANNEL]; + s64 timestamp __aligned(8); + } data; + unsigned int raw; + int i = 0, bit, ret; + + memset(&data, 0, sizeof(data)); + + pm_runtime_get_sync(dev); + + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { + unsigned int addr = rtq6056_channels[bit].address; + + ret = regmap_read(priv->regmap, addr, &raw); + if (ret) + goto out; + + data.vals[i++] = raw; + } + + iio_push_to_buffers_with_timestamp(indio_dev, &data, iio_get_time_ns(indio_dev)); + +out: + pm_runtime_mark_last_busy(dev); + pm_runtime_put(dev); + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static void rtq6056_enter_shutdown_state(void *dev) +{ + struct rtq6056_priv *priv = dev_get_drvdata(dev); + + /* Enter shutdown state */ + regmap_field_write(priv->rm_fields[F_OPMODE], 0); +} + +static bool rtq6056_is_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case RTQ6056_REG_CONFIG ... RTQ6056_REG_ALERTLIMIT: + case RTQ6056_REG_MANUFACTID ... RTQ6056_REG_DIEID: + return true; + default: + return false; + } +} + +static bool rtq6056_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case RTQ6056_REG_CONFIG: + case RTQ6056_REG_CALIBRATION ... RTQ6056_REG_ALERTLIMIT: + return true; + default: + return false; + } +} + +static const struct regmap_config rtq6056_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .val_format_endian = REGMAP_ENDIAN_BIG, + .max_register = RTQ6056_REG_DIEID, + .readable_reg = rtq6056_is_readable_reg, + .writeable_reg = rtq6056_is_writeable_reg, +}; + +static int rtq6056_probe(struct i2c_client *i2c) +{ + struct iio_dev *indio_dev; + struct rtq6056_priv *priv; + struct device *dev = &i2c->dev; + struct regmap *regmap; + unsigned int vendor_id, shunt_resistor_uohm; + int ret; + + if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -EOPNOTSUPP; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + priv = iio_priv(indio_dev); + priv->dev = dev; + priv->vshuntct_us = priv->vbusct_us = 1037; + priv->avg_sample = 1; + i2c_set_clientdata(i2c, priv); + + regmap = devm_regmap_init_i2c(i2c, &rtq6056_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to init regmap\n"); + + priv->regmap = regmap; + + ret = regmap_read(regmap, RTQ6056_REG_MANUFACTID, &vendor_id); + if (ret) + return dev_err_probe(dev, ret, + "Failed to get manufacturer info\n"); + + if (vendor_id != RTQ6056_VENDOR_ID) + return dev_err_probe(dev, -ENODEV, + "Invalid vendor id 0x%04x\n", vendor_id); + + ret = devm_regmap_field_bulk_alloc(dev, regmap, priv->rm_fields, + rtq6056_reg_fields, F_MAX_FIELDS); + if (ret) + return dev_err_probe(dev, ret, "Failed to init regmap field\n"); + + /* + * By default, configure average sample as 1, bus and shunt conversion + * time as 1037 microsecond, and operating mode to all on. + */ + ret = regmap_write(regmap, RTQ6056_REG_CONFIG, RTQ6056_DEFAULT_CONFIG); + if (ret) + return dev_err_probe(dev, ret, + "Failed to enable continuous sensing\n"); + + ret = devm_add_action_or_reset(dev, rtq6056_enter_shutdown_state, dev); + if (ret) + return ret; + + pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC); + pm_runtime_use_autosuspend(dev); + pm_runtime_set_active(dev); + pm_runtime_mark_last_busy(dev); + ret = devm_pm_runtime_enable(dev); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable pm_runtime\n"); + + /* By default, use 2000 micro-Ohm resistor */ + shunt_resistor_uohm = 2000; + device_property_read_u32(dev, "shunt-resistor-micro-ohms", + &shunt_resistor_uohm); + + ret = rtq6056_set_shunt_resistor(priv, shunt_resistor_uohm); + if (ret) + return dev_err_probe(dev, ret, + "Failed to init shunt resistor\n"); + + indio_dev->name = "rtq6056"; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = rtq6056_channels; + indio_dev->num_channels = ARRAY_SIZE(rtq6056_channels); + indio_dev->info = &rtq6056_info; + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + rtq6056_buffer_trigger_handler, + NULL); + if (ret) + return dev_err_probe(dev, ret, + "Failed to allocate iio trigger buffer\n"); + + return devm_iio_device_register(dev, indio_dev); +} + +static int rtq6056_runtime_suspend(struct device *dev) +{ + struct rtq6056_priv *priv = dev_get_drvdata(dev); + + /* Configure to shutdown mode */ + return regmap_field_write(priv->rm_fields[F_OPMODE], 0); +} + +static int rtq6056_runtime_resume(struct device *dev) +{ + struct rtq6056_priv *priv = dev_get_drvdata(dev); + int sample_rdy_time_us, ret; + + ret = regmap_field_write(priv->rm_fields[F_OPMODE], RTQ6056_CONT_ALLON); + if (ret) + return ret; + + sample_rdy_time_us = priv->vbusct_us + priv->vshuntct_us; + sample_rdy_time_us *= priv->avg_sample; + + usleep_range(sample_rdy_time_us, sample_rdy_time_us + 100); + + return 0; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(rtq6056_pm_ops, rtq6056_runtime_suspend, + rtq6056_runtime_resume, NULL); + +static const struct of_device_id rtq6056_device_match[] = { + { .compatible = "richtek,rtq6056" }, + {} +}; +MODULE_DEVICE_TABLE(of, rtq6056_device_match); + +static struct i2c_driver rtq6056_driver = { + .driver = { + .name = "rtq6056", + .of_match_table = rtq6056_device_match, + .pm = pm_ptr(&rtq6056_pm_ops), + }, + .probe_new = rtq6056_probe, +}; +module_i2c_driver(rtq6056_driver); + +MODULE_AUTHOR("ChiYuan Huang "); +MODULE_DESCRIPTION("Richtek RTQ6056 Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c index 130e8dd6f0c8..6256977eb7f7 100644 --- a/drivers/iio/adc/stm32-adc.c +++ b/drivers/iio/adc/stm32-adc.c @@ -21,11 +21,11 @@ #include #include #include +#include #include #include #include -#include -#include +#include #include "stm32-adc-core.h" @@ -241,6 +241,7 @@ struct stm32_adc_cfg { * @chan_name: channel name array * @num_diff: number of differential channels * @int_ch: internal channel indexes array + * @nsmps: number of channels with optional sample time */ struct stm32_adc { struct stm32_adc_common *common; @@ -267,6 +268,7 @@ struct stm32_adc { char chan_name[STM32_ADC_CH_MAX][STM32_ADC_CH_SZ]; u32 num_diff; int int_ch[STM32_ADC_INT_CH_NB]; + int nsmps; }; struct stm32_adc_diff_channel { @@ -1520,8 +1522,8 @@ static int stm32_adc_update_scan_mode(struct iio_dev *indio_dev, return ret; } -static int stm32_adc_of_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static int stm32_adc_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { int i; @@ -1575,7 +1577,7 @@ static const struct iio_info stm32_adc_iio_info = { .hwfifo_set_watermark = stm32_adc_set_watermark, .update_scan_mode = stm32_adc_update_scan_mode, .debugfs_reg_access = stm32_adc_debugfs_reg_access, - .of_xlate = stm32_adc_of_xlate, + .fwnode_xlate = stm32_adc_fwnode_xlate, }; static unsigned int stm32_adc_dma_residue(struct stm32_adc *adc) @@ -1772,14 +1774,14 @@ static const struct iio_chan_spec_ext_info stm32_adc_ext_info[] = { {}, }; -static int stm32_adc_of_get_resolution(struct iio_dev *indio_dev) +static int stm32_adc_fw_get_resolution(struct iio_dev *indio_dev) { - struct device_node *node = indio_dev->dev.of_node; + struct device *dev = &indio_dev->dev; struct stm32_adc *adc = iio_priv(indio_dev); unsigned int i; u32 res; - if (of_property_read_u32(node, "assigned-resolution-bits", &res)) + if (device_property_read_u32(dev, "assigned-resolution-bits", &res)) res = adc->cfg->adc_info->resolutions[0]; for (i = 0; i < adc->cfg->adc_info->num_res; i++) @@ -1863,11 +1865,11 @@ static void stm32_adc_chan_init_one(struct iio_dev *indio_dev, static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm32_adc *adc) { - struct device_node *node = indio_dev->dev.of_node; + struct device *dev = &indio_dev->dev; const struct stm32_adc_info *adc_info = adc->cfg->adc_info; int num_channels = 0, ret; - ret = of_property_count_u32_elems(node, "st,adc-channels"); + ret = device_property_count_u32(dev, "st,adc-channels"); if (ret > adc_info->max_channels) { dev_err(&indio_dev->dev, "Bad st,adc-channels?\n"); return -EINVAL; @@ -1875,8 +1877,15 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm num_channels += ret; } - ret = of_property_count_elems_of_size(node, "st,adc-diff-channels", - sizeof(struct stm32_adc_diff_channel)); + /* + * each st,adc-diff-channels is a group of 2 u32 so we divide @ret + * to get the *real* number of channels. + */ + ret = device_property_count_u32(dev, "st,adc-diff-channels"); + if (ret < 0) + return ret; + + ret /= (int)(sizeof(struct stm32_adc_diff_channel) / sizeof(u32)); if (ret > adc_info->max_channels) { dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n"); return -EINVAL; @@ -1886,8 +1895,8 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm } /* Optional sample time is provided either for each, or all channels */ - ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs"); - if (ret > 1 && ret != num_channels) { + adc->nsmps = device_property_count_u32(dev, "st,min-sample-time-nsecs"); + if (adc->nsmps > 1 && adc->nsmps != num_channels) { dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n"); return -EINVAL; } @@ -1897,21 +1906,20 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev, struct stm32_adc *adc, - struct iio_chan_spec *channels) + struct iio_chan_spec *channels, + int nchans) { - struct device_node *node = indio_dev->dev.of_node; const struct stm32_adc_info *adc_info = adc->cfg->adc_info; struct stm32_adc_diff_channel diff[STM32_ADC_CH_MAX]; + struct device *dev = &indio_dev->dev; u32 num_diff = adc->num_diff; int size = num_diff * sizeof(*diff) / sizeof(u32); - int scan_index = 0, val, ret, i; - struct property *prop; - const __be32 *cur; - u32 smp = 0; + int scan_index = 0, ret, i, c; + u32 smp = 0, smps[STM32_ADC_CH_MAX], chans[STM32_ADC_CH_MAX]; if (num_diff) { - ret = of_property_read_u32_array(node, "st,adc-diff-channels", - (u32 *)diff, size); + ret = device_property_read_u32_array(dev, "st,adc-diff-channels", + (u32 *)diff, size); if (ret) { dev_err(&indio_dev->dev, "Failed to get diff channels %d\n", ret); return ret; @@ -1932,32 +1940,47 @@ static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev, } } - of_property_for_each_u32(node, "st,adc-channels", prop, cur, val) { - if (val >= adc_info->max_channels) { - dev_err(&indio_dev->dev, "Invalid channel %d\n", val); + ret = device_property_read_u32_array(dev, "st,adc-channels", chans, + nchans); + if (ret) + return ret; + + for (c = 0; c < nchans; c++) { + if (chans[c] >= adc_info->max_channels) { + dev_err(&indio_dev->dev, "Invalid channel %d\n", + chans[c]); return -EINVAL; } /* Channel can't be configured both as single-ended & diff */ for (i = 0; i < num_diff; i++) { - if (val == diff[i].vinp) { - dev_err(&indio_dev->dev, "channel %d misconfigured\n", val); + if (chans[c] == diff[i].vinp) { + dev_err(&indio_dev->dev, "channel %d misconfigured\n", chans[c]); return -EINVAL; } } - stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val, - 0, scan_index, false); + stm32_adc_chan_init_one(indio_dev, &channels[scan_index], + chans[c], 0, scan_index, false); scan_index++; } + if (adc->nsmps > 0) { + ret = device_property_read_u32_array(dev, "st,min-sample-time-nsecs", + smps, adc->nsmps); + if (ret) + return ret; + } + for (i = 0; i < scan_index; i++) { /* - * Using of_property_read_u32_index(), smp value will only be - * modified if valid u32 value can be decoded. This allows to - * get either no value, 1 shared value for all indexes, or one - * value per channel. + * This check is used with the above logic so that smp value + * will only be modified if valid u32 value can be decoded. This + * allows to get either no value, 1 shared value for all indexes, + * or one value per channel. The point is to have the same + * behavior as 'of_property_read_u32_index()'. */ - of_property_read_u32_index(node, "st,min-sample-time-nsecs", i, &smp); + if (i < adc->nsmps) + smp = smps[i]; /* Prepare sampling time settings */ stm32_adc_smpr_init(adc, channels[i].channel, smp); @@ -2005,22 +2028,21 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev, struct stm32_adc *adc, struct iio_chan_spec *channels) { - struct device_node *node = indio_dev->dev.of_node; const struct stm32_adc_info *adc_info = adc->cfg->adc_info; - struct device_node *child; + struct fwnode_handle *child; const char *name; int val, scan_index = 0, ret; bool differential; u32 vin[2]; - for_each_available_child_of_node(node, child) { - ret = of_property_read_u32(child, "reg", &val); + device_for_each_child_node(&indio_dev->dev, child) { + ret = fwnode_property_read_u32(child, "reg", &val); if (ret) { dev_err(&indio_dev->dev, "Missing channel index %d\n", ret); goto err; } - ret = of_property_read_string(child, "label", &name); + ret = fwnode_property_read_string(child, "label", &name); /* label is optional */ if (!ret) { if (strlen(name) >= STM32_ADC_CH_SZ) { @@ -2047,7 +2069,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev, } differential = false; - ret = of_property_read_u32_array(child, "diff-channels", vin, 2); + ret = fwnode_property_read_u32_array(child, "diff-channels", vin, 2); /* diff-channels is optional */ if (!ret) { differential = true; @@ -2064,7 +2086,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev, stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val, vin[1], scan_index, differential); - ret = of_property_read_u32(child, "st,min-sample-time-ns", &val); + ret = fwnode_property_read_u32(child, "st,min-sample-time-ns", &val); /* st,min-sample-time-ns is optional */ if (!ret) { stm32_adc_smpr_init(adc, channels[scan_index].channel, val); @@ -2082,14 +2104,13 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev, return scan_index; err: - of_node_put(child); + fwnode_handle_put(child); return ret; } -static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping) +static int stm32_adc_chan_fw_init(struct iio_dev *indio_dev, bool timestamping) { - struct device_node *node = indio_dev->dev.of_node; struct stm32_adc *adc = iio_priv(indio_dev); const struct stm32_adc_info *adc_info = adc->cfg->adc_info; struct iio_chan_spec *channels; @@ -2099,7 +2120,7 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping) for (i = 0; i < STM32_ADC_INT_CH_NB; i++) adc->int_ch[i] = STM32_ADC_INT_CH_NONE; - num_channels = of_get_available_child_count(node); + num_channels = device_get_child_node_count(&indio_dev->dev); /* If no channels have been found, fallback to channels legacy properties. */ if (!num_channels) { legacy = true; @@ -2130,7 +2151,8 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping) return -ENOMEM; if (legacy) - ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels); + ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels, + num_channels); else ret = stm32_adc_generic_chan_init(indio_dev, adc, channels); if (ret < 0) @@ -2212,9 +2234,6 @@ static int stm32_adc_probe(struct platform_device *pdev) bool timestamping = false; int ret; - if (!pdev->dev.of_node) - return -ENODEV; - indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc)); if (!indio_dev) return -ENOMEM; @@ -2223,17 +2242,16 @@ static int stm32_adc_probe(struct platform_device *pdev) adc->common = dev_get_drvdata(pdev->dev.parent); spin_lock_init(&adc->lock); init_completion(&adc->completion); - adc->cfg = (const struct stm32_adc_cfg *) - of_match_device(dev->driver->of_match_table, dev)->data; + adc->cfg = device_get_match_data(dev); indio_dev->name = dev_name(&pdev->dev); - indio_dev->dev.of_node = pdev->dev.of_node; + device_set_node(&indio_dev->dev, dev_fwnode(&pdev->dev)); indio_dev->info = &stm32_adc_iio_info; indio_dev->modes = INDIO_DIRECT_MODE | INDIO_HARDWARE_TRIGGERED; platform_set_drvdata(pdev, indio_dev); - ret = of_property_read_u32(pdev->dev.of_node, "reg", &adc->offset); + ret = device_property_read_u32(dev, "reg", &adc->offset); if (ret != 0) { dev_err(&pdev->dev, "missing reg property\n"); return -EINVAL; @@ -2262,7 +2280,7 @@ static int stm32_adc_probe(struct platform_device *pdev) } } - ret = stm32_adc_of_get_resolution(indio_dev); + ret = stm32_adc_fw_get_resolution(indio_dev); if (ret < 0) return ret; @@ -2279,7 +2297,7 @@ static int stm32_adc_probe(struct platform_device *pdev) timestamping = true; } - ret = stm32_adc_chan_of_init(indio_dev, timestamping); + ret = stm32_adc_chan_fw_init(indio_dev, timestamping); if (ret < 0) goto err_dma_disable; diff --git a/drivers/iio/adc/ti-ads131e08.c b/drivers/iio/adc/ti-ads131e08.c index 32237cacc9a3..5235a93f28bc 100644 --- a/drivers/iio/adc/ti-ads131e08.c +++ b/drivers/iio/adc/ti-ads131e08.c @@ -797,13 +797,6 @@ static void ads131e08_regulator_disable(void *data) regulator_disable(st->vref_reg); } -static void ads131e08_clk_disable(void *data) -{ - struct ads131e08_state *st = data; - - clk_disable_unprepare(st->adc_clk); -} - static int ads131e08_probe(struct spi_device *spi) { const struct ads131e08_info *info; @@ -896,21 +889,11 @@ static int ads131e08_probe(struct spi_device *spi) st->vref_reg = NULL; } - st->adc_clk = devm_clk_get(&spi->dev, "adc-clk"); + st->adc_clk = devm_clk_get_enabled(&spi->dev, "adc-clk"); if (IS_ERR(st->adc_clk)) return dev_err_probe(&spi->dev, PTR_ERR(st->adc_clk), "failed to get the ADC clock\n"); - ret = clk_prepare_enable(st->adc_clk); - if (ret) { - dev_err(&spi->dev, "failed to prepare/enable the ADC clock\n"); - return ret; - } - - ret = devm_add_action_or_reset(&spi->dev, ads131e08_clk_disable, st); - if (ret) - return ret; - adc_clk_hz = clk_get_rate(st->adc_clk); if (!adc_clk_hz) { dev_err(&spi->dev, "failed to get the ADC clock rate\n"); diff --git a/drivers/iio/adc/ti-tsc2046.c b/drivers/iio/adc/ti-tsc2046.c index 0d9436a69cbf..1bbb51a6683c 100644 --- a/drivers/iio/adc/ti-tsc2046.c +++ b/drivers/iio/adc/ti-tsc2046.c @@ -8,7 +8,9 @@ #include #include #include +#include #include +#include #include @@ -139,6 +141,7 @@ enum tsc2046_state { struct tsc2046_adc_priv { struct spi_device *spi; const struct tsc2046_adc_dcfg *dcfg; + struct regulator *vref_reg; struct iio_trigger *trig; struct hrtimer trig_timer; @@ -173,6 +176,7 @@ struct tsc2046_adc_priv { u32 scan_interval_us; u32 time_per_scan_us; u32 time_per_bit_ns; + unsigned int vref_mv; struct tsc2046_adc_ch_cfg ch_cfg[TI_TSC2046_MAX_CHAN]; }; @@ -252,7 +256,9 @@ static u8 tsc2046_adc_get_cmd(struct tsc2046_adc_priv *priv, int ch_idx, case TI_TSC2046_ADDR_AUX: case TI_TSC2046_ADDR_VBAT: case TI_TSC2046_ADDR_TEMP0: - pd |= TI_TSC2046_SER | TI_TSC2046_PD1_VREF_ON; + pd |= TI_TSC2046_SER; + if (!priv->vref_reg) + pd |= TI_TSC2046_PD1_VREF_ON; } return TI_TSC2046_START | FIELD_PREP(TI_TSC2046_ADDR, ch_idx) | pd; @@ -468,7 +474,7 @@ static int tsc2046_adc_read_raw(struct iio_dev *indio_dev, * So, it is better to use external voltage-divider driver * instead, which is calculating complete chain. */ - *val = TI_TSC2046_INT_VREF; + *val = priv->vref_mv; *val2 = chan->scan_type.realbits; return IIO_VAL_FRACTIONAL_LOG2; } @@ -740,6 +746,49 @@ static void tsc2046_adc_parse_fwnode(struct tsc2046_adc_priv *priv) } } +static void tsc2046_adc_regulator_disable(void *data) +{ + struct tsc2046_adc_priv *priv = data; + + regulator_disable(priv->vref_reg); +} + +static int tsc2046_adc_configure_regulator(struct tsc2046_adc_priv *priv) +{ + struct device *dev = &priv->spi->dev; + int ret; + + priv->vref_reg = devm_regulator_get_optional(dev, "vref"); + if (IS_ERR(priv->vref_reg)) { + /* If regulator exists but can't be get, return an error */ + if (PTR_ERR(priv->vref_reg) != -ENODEV) + return PTR_ERR(priv->vref_reg); + priv->vref_reg = NULL; + } + if (!priv->vref_reg) { + /* Use internal reference */ + priv->vref_mv = TI_TSC2046_INT_VREF; + return 0; + } + + ret = regulator_enable(priv->vref_reg); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, tsc2046_adc_regulator_disable, + priv); + if (ret) + return ret; + + ret = regulator_get_voltage(priv->vref_reg); + if (ret < 0) + return ret; + + priv->vref_mv = ret / MILLI; + + return 0; +} + static int tsc2046_adc_probe(struct spi_device *spi) { const struct tsc2046_adc_dcfg *dcfg; @@ -756,6 +805,11 @@ static int tsc2046_adc_probe(struct spi_device *spi) } dcfg = device_get_match_data(dev); + if (!dcfg) { + const struct spi_device_id *id = spi_get_device_id(spi); + + dcfg = (const struct tsc2046_adc_dcfg *)id->driver_data; + } if (!dcfg) return -EINVAL; @@ -781,6 +835,10 @@ static int tsc2046_adc_probe(struct spi_device *spi) indio_dev->num_channels = dcfg->num_channels; indio_dev->info = &tsc2046_adc_info; + ret = tsc2046_adc_configure_regulator(priv); + if (ret) + return ret; + tsc2046_adc_parse_fwnode(priv); ret = tsc2046_adc_setup_spi_msg(priv); @@ -833,11 +891,18 @@ static const struct of_device_id ads7950_of_table[] = { }; MODULE_DEVICE_TABLE(of, ads7950_of_table); +static const struct spi_device_id tsc2046_adc_spi_ids[] = { + { "tsc2046e-adc", (unsigned long)&tsc2046_adc_dcfg_tsc2046e }, + { } +}; +MODULE_DEVICE_TABLE(spi, tsc2046_adc_spi_ids); + static struct spi_driver tsc2046_adc_driver = { .driver = { .name = "tsc2046", .of_match_table = ads7950_of_table, }, + .id_table = tsc2046_adc_spi_ids, .probe = tsc2046_adc_probe, }; module_spi_driver(tsc2046_adc_driver); diff --git a/drivers/iio/adc/xilinx-ams.c b/drivers/iio/adc/xilinx-ams.c index 9cd2713146e5..5b4bdf3a26bb 100644 --- a/drivers/iio/adc/xilinx-ams.c +++ b/drivers/iio/adc/xilinx-ams.c @@ -1351,11 +1351,6 @@ static const struct of_device_id ams_of_match_table[] = { }; MODULE_DEVICE_TABLE(of, ams_of_match_table); -static void ams_clk_disable_unprepare(void *data) -{ - clk_disable_unprepare(data); -} - static int ams_probe(struct platform_device *pdev) { struct iio_dev *indio_dev; @@ -1380,18 +1375,10 @@ static int ams_probe(struct platform_device *pdev) if (IS_ERR(ams->base)) return PTR_ERR(ams->base); - ams->clk = devm_clk_get(&pdev->dev, NULL); + ams->clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(ams->clk)) return PTR_ERR(ams->clk); - ret = clk_prepare_enable(ams->clk); - if (ret < 0) - return ret; - - ret = devm_add_action_or_reset(&pdev->dev, ams_clk_disable_unprepare, ams->clk); - if (ret < 0) - return ret; - ret = devm_delayed_work_autocancel(&pdev->dev, &ams->ams_unmask_work, ams_unmask_worker); if (ret < 0) diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c index 1b247722ba25..292f2892d223 100644 --- a/drivers/iio/adc/xilinx-xadc-core.c +++ b/drivers/iio/adc/xilinx-xadc-core.c @@ -1296,13 +1296,6 @@ static const char * const xadc_type_names[] = { [XADC_TYPE_US] = "xilinx-system-monitor", }; -static void xadc_clk_disable_unprepare(void *data) -{ - struct clk *clk = data; - - clk_disable_unprepare(clk); -} - static void xadc_cancel_delayed_work(void *data) { struct delayed_work *work = data; @@ -1374,19 +1367,10 @@ static int xadc_probe(struct platform_device *pdev) } } - xadc->clk = devm_clk_get(dev, NULL); + xadc->clk = devm_clk_get_enabled(dev, NULL); if (IS_ERR(xadc->clk)) return PTR_ERR(xadc->clk); - ret = clk_prepare_enable(xadc->clk); - if (ret) - return ret; - - ret = devm_add_action_or_reset(dev, - xadc_clk_disable_unprepare, xadc->clk); - if (ret) - return ret; - /* * Make sure not to exceed the maximum samplerate since otherwise the * resulting interrupt storm will soft-lock the system. diff --git a/drivers/iio/addac/Kconfig b/drivers/iio/addac/Kconfig index 138492362f20..fcf6d2269bfc 100644 --- a/drivers/iio/addac/Kconfig +++ b/drivers/iio/addac/Kconfig @@ -17,4 +17,20 @@ config AD74413R To compile this driver as a module, choose M here: the module will be called ad74413r. +config STX104 + tristate "Apex Embedded Systems STX104 driver" + depends on PC104 && X86 + select ISA_BUS_API + select GPIOLIB + help + Say yes here to build support for the Apex Embedded Systems STX104 + integrated analog PC/104 card. + + This driver supports the 16 channels of single-ended (8 channels of + differential) analog inputs, 2 channels of analog output, 4 digital + inputs, and 4 digital outputs provided by the STX104. + + The base port addresses for the devices may be configured via the base + array module parameter. + endmenu diff --git a/drivers/iio/addac/Makefile b/drivers/iio/addac/Makefile index cfd4bbe64ad3..17de20ef0d8e 100644 --- a/drivers/iio/addac/Makefile +++ b/drivers/iio/addac/Makefile @@ -5,3 +5,4 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_AD74413R) += ad74413r.o +obj-$(CONFIG_STX104) += stx104.o diff --git a/drivers/iio/adc/stx104.c b/drivers/iio/addac/stx104.c similarity index 100% rename from drivers/iio/adc/stx104.c rename to drivers/iio/addac/stx104.c diff --git a/drivers/iio/cdc/Kconfig b/drivers/iio/cdc/Kconfig index 5e3319a3ff48..e0a5ce66a984 100644 --- a/drivers/iio/cdc/Kconfig +++ b/drivers/iio/cdc/Kconfig @@ -14,4 +14,14 @@ config AD7150 To compile this driver as a module, choose M here: the module will be called ad7150. +config AD7746 + tristate "Analog Devices AD7745, AD7746 AD7747 capacitive sensor driver" + depends on I2C + help + Say yes here to build support for Analog Devices capacitive sensors. + (AD7745, AD7746, AD7747) Provides direct access via sysfs. + + To compile this driver as a module, choose M here: the + module will be called ad7746. + endmenu diff --git a/drivers/iio/cdc/Makefile b/drivers/iio/cdc/Makefile index ee490637b032..41db756d8020 100644 --- a/drivers/iio/cdc/Makefile +++ b/drivers/iio/cdc/Makefile @@ -4,3 +4,4 @@ # obj-$(CONFIG_AD7150) += ad7150.o +obj-$(CONFIG_AD7746) += ad7746.o diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/iio/cdc/ad7746.c similarity index 66% rename from drivers/staging/iio/cdc/ad7746.c rename to drivers/iio/cdc/ad7746.c index 52b8957c19c9..b266f5328140 100644 --- a/drivers/staging/iio/cdc/ad7746.c +++ b/drivers/iio/cdc/ad7746.c @@ -5,6 +5,7 @@ * Copyright 2011 Analog Devices Inc. */ +#include #include #include #include @@ -15,12 +16,12 @@ #include #include +#include + #include #include -/* - * AD7746 Register Definition - */ +/* AD7746 Register Definition */ #define AD7746_REG_STATUS 0 #define AD7746_REG_CAP_DATA_HIGH 1 @@ -48,11 +49,12 @@ #define AD7746_CAPSETUP_CACHOP BIT(0) /* Voltage/Temperature Setup Register Bit Designations (AD7746_REG_VT_SETUP) */ -#define AD7746_VTSETUP_VTEN (1 << 7) -#define AD7746_VTSETUP_VTMD_INT_TEMP (0 << 5) -#define AD7746_VTSETUP_VTMD_EXT_TEMP (1 << 5) -#define AD7746_VTSETUP_VTMD_VDD_MON (2 << 5) -#define AD7746_VTSETUP_VTMD_EXT_VIN (3 << 5) +#define AD7746_VTSETUP_VTEN BIT(7) +#define AD7746_VTSETUP_VTMD_MASK GENMASK(6, 5) +#define AD7746_VTSETUP_VTMD_INT_TEMP 0 +#define AD7746_VTSETUP_VTMD_EXT_TEMP 1 +#define AD7746_VTSETUP_VTMD_VDD_MON 2 +#define AD7746_VTSETUP_VTMD_EXT_VIN 3 #define AD7746_VTSETUP_EXTREF BIT(4) #define AD7746_VTSETUP_VTSHORT BIT(1) #define AD7746_VTSETUP_VTCHOP BIT(0) @@ -64,23 +66,22 @@ #define AD7746_EXCSETUP_NEXCB BIT(4) #define AD7746_EXCSETUP_EXCA BIT(3) #define AD7746_EXCSETUP_NEXCA BIT(2) -#define AD7746_EXCSETUP_EXCLVL(x) (((x) & 0x3) << 0) +#define AD7746_EXCSETUP_EXCLVL_MASK GENMASK(1, 0) /* Config Register Bit Designations (AD7746_REG_CFG) */ -#define AD7746_CONF_VTFS_SHIFT 6 -#define AD7746_CONF_CAPFS_SHIFT 3 #define AD7746_CONF_VTFS_MASK GENMASK(7, 6) #define AD7746_CONF_CAPFS_MASK GENMASK(5, 3) -#define AD7746_CONF_MODE_IDLE (0 << 0) -#define AD7746_CONF_MODE_CONT_CONV (1 << 0) -#define AD7746_CONF_MODE_SINGLE_CONV (2 << 0) -#define AD7746_CONF_MODE_PWRDN (3 << 0) -#define AD7746_CONF_MODE_OFFS_CAL (5 << 0) -#define AD7746_CONF_MODE_GAIN_CAL (6 << 0) +#define AD7746_CONF_MODE_MASK GENMASK(2, 0) +#define AD7746_CONF_MODE_IDLE 0 +#define AD7746_CONF_MODE_CONT_CONV 1 +#define AD7746_CONF_MODE_SINGLE_CONV 2 +#define AD7746_CONF_MODE_PWRDN 3 +#define AD7746_CONF_MODE_OFFS_CAL 5 +#define AD7746_CONF_MODE_GAIN_CAL 6 /* CAPDAC Register Bit Designations (AD7746_REG_CAPDACx) */ #define AD7746_CAPDAC_DACEN BIT(7) -#define AD7746_CAPDAC_DACP(x) ((x) & 0x7F) +#define AD7746_CAPDAC_DACP_MASK GENMASK(6, 0) struct ad7746_chip_info { struct i2c_client *client; @@ -94,11 +95,6 @@ struct ad7746_chip_info { u8 vt_setup; u8 capdac[2][2]; s8 capdac_set; - - union { - __be32 d32; - u8 d8[4]; - } data ____cacheline_aligned; }; enum ad7746_chan { @@ -112,43 +108,87 @@ enum ad7746_chan { CIN2_DIFF, }; +struct ad7746_chan_info { + u8 addr; + union { + u8 vtmd; + struct { /* CAP SETUP fields */ + unsigned int cin2 : 1; + unsigned int capdiff : 1; + }; + }; +}; + +static const struct ad7746_chan_info ad7746_chan_info[] = { + [VIN] = { + .addr = AD7746_REG_VT_DATA_HIGH, + .vtmd = AD7746_VTSETUP_VTMD_EXT_VIN, + }, + [VIN_VDD] = { + .addr = AD7746_REG_VT_DATA_HIGH, + .vtmd = AD7746_VTSETUP_VTMD_VDD_MON, + }, + [TEMP_INT] = { + .addr = AD7746_REG_VT_DATA_HIGH, + .vtmd = AD7746_VTSETUP_VTMD_INT_TEMP, + }, + [TEMP_EXT] = { + .addr = AD7746_REG_VT_DATA_HIGH, + .vtmd = AD7746_VTSETUP_VTMD_EXT_TEMP, + }, + [CIN1] = { + .addr = AD7746_REG_CAP_DATA_HIGH, + }, + [CIN1_DIFF] = { + .addr = AD7746_REG_CAP_DATA_HIGH, + .capdiff = 1, + }, + [CIN2] = { + .addr = AD7746_REG_CAP_DATA_HIGH, + .cin2 = 1, + }, + [CIN2_DIFF] = { + .addr = AD7746_REG_CAP_DATA_HIGH, + .cin2 = 1, + .capdiff = 1, + }, +}; + static const struct iio_chan_spec ad7746_channels[] = { [VIN] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | - BIT(IIO_CHAN_INFO_SAMP_FREQ), - .address = AD7746_REG_VT_DATA_HIGH << 8 | - AD7746_VTSETUP_VTMD_EXT_VIN, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .address = VIN, }, [VIN_VDD] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, .extend_name = "supply", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | - BIT(IIO_CHAN_INFO_SAMP_FREQ), - .address = AD7746_REG_VT_DATA_HIGH << 8 | - AD7746_VTSETUP_VTMD_VDD_MON, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .address = VIN_VDD, }, [TEMP_INT] = { .type = IIO_TEMP, .indexed = 1, .channel = 0, - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), - .address = AD7746_REG_VT_DATA_HIGH << 8 | - AD7746_VTSETUP_VTMD_INT_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .address = TEMP_INT, }, [TEMP_EXT] = { .type = IIO_TEMP, .indexed = 1, .channel = 1, - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), - .address = AD7746_REG_VT_DATA_HIGH << 8 | - AD7746_VTSETUP_VTMD_EXT_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .address = TEMP_EXT, }, [CIN1] = { .type = IIO_CAPACITANCE, @@ -158,7 +198,8 @@ static const struct iio_chan_spec ad7746_channels[] = { BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), - .address = AD7746_REG_CAP_DATA_HIGH << 8, + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .address = CIN1, }, [CIN1_DIFF] = { .type = IIO_CAPACITANCE, @@ -167,11 +208,11 @@ static const struct iio_chan_spec ad7746_channels[] = { .channel = 0, .channel2 = 2, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_ZEROPOINT), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), - .address = AD7746_REG_CAP_DATA_HIGH << 8 | - AD7746_CAPSETUP_CAPDIFF + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .address = CIN1_DIFF, }, [CIN2] = { .type = IIO_CAPACITANCE, @@ -181,8 +222,8 @@ static const struct iio_chan_spec ad7746_channels[] = { BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), - .address = AD7746_REG_CAP_DATA_HIGH << 8 | - AD7746_CAPSETUP_CIN2, + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .address = CIN2, }, [CIN2_DIFF] = { .type = IIO_CAPACITANCE, @@ -191,22 +232,22 @@ static const struct iio_chan_spec ad7746_channels[] = { .channel = 1, .channel2 = 3, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_ZEROPOINT), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), - .address = AD7746_REG_CAP_DATA_HIGH << 8 | - AD7746_CAPSETUP_CAPDIFF | AD7746_CAPSETUP_CIN2, + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .address = CIN2_DIFF, } }; /* Values are Update Rate (Hz), Conversion Time (ms) + 1*/ static const unsigned char ad7746_vt_filter_rate_table[][2] = { - {50, 20 + 1}, {31, 32 + 1}, {16, 62 + 1}, {8, 122 + 1}, + { 50, 20 + 1 }, { 31, 32 + 1 }, { 16, 62 + 1 }, { 8, 122 + 1 }, }; static const unsigned char ad7746_cap_filter_rate_table[][2] = { - {91, 11 + 1}, {84, 12 + 1}, {50, 20 + 1}, {26, 38 + 1}, - {16, 62 + 1}, {13, 77 + 1}, {11, 92 + 1}, {9, 110 + 1}, + { 91, 11 + 1 }, { 84, 12 + 1 }, { 50, 20 + 1 }, { 26, 38 + 1 }, + { 16, 62 + 1 }, { 13, 77 + 1 }, { 11, 92 + 1 }, { 9, 110 + 1 }, }; static int ad7746_set_capdac(struct ad7746_chip_info *chip, int channel) @@ -231,10 +272,13 @@ static int ad7746_select_channel(struct iio_dev *indio_dev, switch (chan->type) { case IIO_CAPACITANCE: - cap_setup = (chan->address & 0xFF) | AD7746_CAPSETUP_CAPEN; + cap_setup = FIELD_PREP(AD7746_CAPSETUP_CIN2, + ad7746_chan_info[chan->address].cin2) | + FIELD_PREP(AD7746_CAPSETUP_CAPDIFF, + ad7746_chan_info[chan->address].capdiff) | + FIELD_PREP(AD7746_CAPSETUP_CAPEN, 1); vt_setup = chip->vt_setup & ~AD7746_VTSETUP_VTEN; - idx = (chip->config & AD7746_CONF_CAPFS_MASK) >> - AD7746_CONF_CAPFS_SHIFT; + idx = FIELD_GET(AD7746_CONF_CAPFS_MASK, chip->config); delay = ad7746_cap_filter_rate_table[idx][1]; ret = ad7746_set_capdac(chip, chan->channel); @@ -246,10 +290,11 @@ static int ad7746_select_channel(struct iio_dev *indio_dev, break; case IIO_VOLTAGE: case IIO_TEMP: - vt_setup = (chan->address & 0xFF) | AD7746_VTSETUP_VTEN; + vt_setup = FIELD_PREP(AD7746_VTSETUP_VTMD_MASK, + ad7746_chan_info[chan->address].vtmd) | + FIELD_PREP(AD7746_VTSETUP_VTEN, 1); cap_setup = chip->cap_setup & ~AD7746_CAPSETUP_CAPEN; - idx = (chip->config & AD7746_CONF_VTFS_MASK) >> - AD7746_CONF_VTFS_SHIFT; + idx = FIELD_GET(AD7746_CONF_VTFS_MASK, chip->config); delay = ad7746_cap_filter_rate_table[idx][1]; break; default: @@ -332,7 +377,8 @@ static ssize_t ad7746_start_offset_calib(struct device *dev, return ret; return ad7746_start_calib(dev, attr, buf, len, - AD7746_CONF_MODE_OFFS_CAL); + FIELD_PREP(AD7746_CONF_MODE_MASK, + AD7746_CONF_MODE_OFFS_CAL)); } static ssize_t ad7746_start_gain_calib(struct device *dev, @@ -347,7 +393,8 @@ static ssize_t ad7746_start_gain_calib(struct device *dev, return ret; return ad7746_start_calib(dev, attr, buf, len, - AD7746_CONF_MODE_GAIN_CAL); + FIELD_PREP(AD7746_CONF_MODE_MASK, + AD7746_CONF_MODE_GAIN_CAL)); } static IIO_DEVICE_ATTR(in_capacitance0_calibbias_calibration, @@ -374,7 +421,7 @@ static int ad7746_store_cap_filter_rate_setup(struct ad7746_chip_info *chip, i = ARRAY_SIZE(ad7746_cap_filter_rate_table) - 1; chip->config &= ~AD7746_CONF_CAPFS_MASK; - chip->config |= i << AD7746_CONF_CAPFS_SHIFT; + chip->config |= FIELD_PREP(AD7746_CONF_CAPFS_MASK, i); return 0; } @@ -392,23 +439,17 @@ static int ad7746_store_vt_filter_rate_setup(struct ad7746_chip_info *chip, i = ARRAY_SIZE(ad7746_vt_filter_rate_table) - 1; chip->config &= ~AD7746_CONF_VTFS_MASK; - chip->config |= i << AD7746_CONF_VTFS_SHIFT; + chip->config |= FIELD_PREP(AD7746_CONF_VTFS_MASK, i); return 0; } -static IIO_CONST_ATTR(in_voltage_sampling_frequency_available, "50 31 16 8"); -static IIO_CONST_ATTR(in_capacitance_sampling_frequency_available, - "91 84 50 26 16 13 11 9"); - static struct attribute *ad7746_attributes[] = { &iio_dev_attr_in_capacitance0_calibbias_calibration.dev_attr.attr, &iio_dev_attr_in_capacitance0_calibscale_calibration.dev_attr.attr, &iio_dev_attr_in_capacitance1_calibscale_calibration.dev_attr.attr, &iio_dev_attr_in_capacitance1_calibbias_calibration.dev_attr.attr, &iio_dev_attr_in_voltage0_calibscale_calibration.dev_attr.attr, - &iio_const_attr_in_voltage_sampling_frequency_available.dev_attr.attr, - &iio_const_attr_in_capacitance_sampling_frequency_available.dev_attr.attr, NULL, }; @@ -425,14 +466,10 @@ static int ad7746_write_raw(struct iio_dev *indio_dev, struct ad7746_chip_info *chip = iio_priv(indio_dev); int ret, reg; - mutex_lock(&chip->lock); - switch (mask) { case IIO_CHAN_INFO_CALIBSCALE: - if (val != 1) { - ret = -EINVAL; - goto out; - } + if (val != 1) + return -EINVAL; val = (val2 * 1024) / 15625; @@ -444,33 +481,32 @@ static int ad7746_write_raw(struct iio_dev *indio_dev, reg = AD7746_REG_VOLT_GAINH; break; default: - ret = -EINVAL; - goto out; + return -EINVAL; } + mutex_lock(&chip->lock); ret = i2c_smbus_write_word_swapped(chip->client, reg, val); + mutex_unlock(&chip->lock); if (ret < 0) - goto out; + return ret; - ret = 0; - break; + return 0; case IIO_CHAN_INFO_CALIBBIAS: - if (val < 0 || val > 0xFFFF) { - ret = -EINVAL; - goto out; - } + if (val < 0 || val > 0xFFFF) + return -EINVAL; + + mutex_lock(&chip->lock); ret = i2c_smbus_write_word_swapped(chip->client, AD7746_REG_CAP_OFFH, val); + mutex_unlock(&chip->lock); if (ret < 0) - goto out; + return ret; - ret = 0; - break; + return 0; case IIO_CHAN_INFO_OFFSET: - if (val < 0 || val > 43008000) { /* 21pF */ - ret = -EINVAL; - goto out; - } + case IIO_CHAN_INFO_ZEROPOINT: + if (val < 0 || val > 43008000) /* 21pF */ + return -EINVAL; /* * CAPDAC Scale = 21pF_typ / 127 @@ -479,42 +515,104 @@ static int ad7746_write_raw(struct iio_dev *indio_dev, */ val /= 338646; - + mutex_lock(&chip->lock); chip->capdac[chan->channel][chan->differential] = val > 0 ? - AD7746_CAPDAC_DACP(val) | AD7746_CAPDAC_DACEN : 0; + FIELD_PREP(AD7746_CAPDAC_DACP_MASK, val) | AD7746_CAPDAC_DACEN : 0; ret = ad7746_set_capdac(chip, chan->channel); - if (ret < 0) - goto out; + if (ret < 0) { + mutex_unlock(&chip->lock); + return ret; + } chip->capdac_set = chan->channel; + mutex_unlock(&chip->lock); - ret = 0; - break; + return 0; case IIO_CHAN_INFO_SAMP_FREQ: - if (val2) { - ret = -EINVAL; - goto out; - } + if (val2) + return -EINVAL; switch (chan->type) { case IIO_CAPACITANCE: + mutex_lock(&chip->lock); ret = ad7746_store_cap_filter_rate_setup(chip, val); - break; + mutex_unlock(&chip->lock); + return ret; case IIO_VOLTAGE: + mutex_lock(&chip->lock); ret = ad7746_store_vt_filter_rate_setup(chip, val); - break; + mutex_unlock(&chip->lock); + return ret; default: - ret = -EINVAL; + return -EINVAL; } + default: + return -EINVAL; + } +} + +static const int ad7746_v_samp_freq[] = { 50, 31, 16, 8, }; +static const int ad7746_cap_samp_freq[] = { 91, 84, 50, 26, 16, 13, 11, 9, }; + +static int ad7746_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, const int **vals, + int *type, int *length, long mask) +{ + if (mask != IIO_CHAN_INFO_SAMP_FREQ) + return -EINVAL; + + switch (chan->type) { + case IIO_VOLTAGE: + *vals = ad7746_v_samp_freq; + *length = ARRAY_SIZE(ad7746_v_samp_freq); + break; + case IIO_CAPACITANCE: + *vals = ad7746_cap_samp_freq; + *length = ARRAY_SIZE(ad7746_cap_samp_freq); break; default: - ret = -EINVAL; + return -EINVAL; } + *type = IIO_VAL_INT; + return IIO_AVAIL_LIST; +} -out: - mutex_unlock(&chip->lock); - return ret; +static int ad7746_read_channel(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val) +{ + struct ad7746_chip_info *chip = iio_priv(indio_dev); + int ret, delay; + u8 data[3]; + u8 regval; + + ret = ad7746_select_channel(indio_dev, chan); + if (ret < 0) + return ret; + delay = ret; + + regval = chip->config | FIELD_PREP(AD7746_CONF_MODE_MASK, + AD7746_CONF_MODE_SINGLE_CONV); + ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG, regval); + if (ret < 0) + return ret; + + msleep(delay); + /* Now read the actual register */ + ret = i2c_smbus_read_i2c_block_data(chip->client, + ad7746_chan_info[chan->address].addr, + sizeof(data), data); + if (ret < 0) + return ret; + + /* + * Offset applied internally becaue the _offset userspace interface is + * needed for the CAP DACs which apply a controllable offset. + */ + *val = get_unaligned_be24(data) - 0x800000; + + return 0; } static int ad7746_read_raw(struct iio_dev *indio_dev, @@ -523,55 +621,18 @@ static int ad7746_read_raw(struct iio_dev *indio_dev, long mask) { struct ad7746_chip_info *chip = iio_priv(indio_dev); - int ret, delay, idx; - u8 regval, reg; - - mutex_lock(&chip->lock); + int ret, idx; + u8 reg; switch (mask) { case IIO_CHAN_INFO_RAW: - case IIO_CHAN_INFO_PROCESSED: - ret = ad7746_select_channel(indio_dev, chan); + mutex_lock(&chip->lock); + ret = ad7746_read_channel(indio_dev, chan, val); + mutex_unlock(&chip->lock); if (ret < 0) - goto out; - delay = ret; + return ret; - regval = chip->config | AD7746_CONF_MODE_SINGLE_CONV; - ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG, - regval); - if (ret < 0) - goto out; - - msleep(delay); - /* Now read the actual register */ - - ret = i2c_smbus_read_i2c_block_data(chip->client, - chan->address >> 8, 3, - &chip->data.d8[1]); - - if (ret < 0) - goto out; - - *val = (be32_to_cpu(chip->data.d32) & 0xFFFFFF) - 0x800000; - - switch (chan->type) { - case IIO_TEMP: - /* - * temperature in milli degrees Celsius - * T = ((*val / 2048) - 4096) * 1000 - */ - *val = (*val * 125) / 256; - break; - case IIO_VOLTAGE: - if (chan->channel == 1) /* supply_raw*/ - *val = *val * 6; - break; - default: - break; - } - - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; case IIO_CHAN_INFO_CALIBSCALE: switch (chan->type) { case IIO_CAPACITANCE: @@ -581,83 +642,78 @@ static int ad7746_read_raw(struct iio_dev *indio_dev, reg = AD7746_REG_VOLT_GAINH; break; default: - ret = -EINVAL; - goto out; + return -EINVAL; } + mutex_lock(&chip->lock); ret = i2c_smbus_read_word_swapped(chip->client, reg); + mutex_unlock(&chip->lock); if (ret < 0) - goto out; + return ret; /* 1 + gain_val / 2^16 */ *val = 1; *val2 = (15625 * ret) / 1024; - ret = IIO_VAL_INT_PLUS_MICRO; - break; + return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_CALIBBIAS: + mutex_lock(&chip->lock); ret = i2c_smbus_read_word_swapped(chip->client, AD7746_REG_CAP_OFFH); + mutex_unlock(&chip->lock); if (ret < 0) - goto out; + return ret; *val = ret; - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; case IIO_CHAN_INFO_OFFSET: - *val = AD7746_CAPDAC_DACP(chip->capdac[chan->channel] - [chan->differential]) * 338646; + case IIO_CHAN_INFO_ZEROPOINT: + *val = FIELD_GET(AD7746_CAPDAC_DACP_MASK, + chip->capdac[chan->channel][chan->differential]) * 338646; - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: switch (chan->type) { case IIO_CAPACITANCE: /* 8.192pf / 2^24 */ *val = 0; *val2 = 488; - ret = IIO_VAL_INT_PLUS_NANO; - break; + return IIO_VAL_INT_PLUS_NANO; case IIO_VOLTAGE: /* 1170mV / 2^23 */ *val = 1170; + if (chan->channel == 1) + *val *= 6; *val2 = 23; - ret = IIO_VAL_FRACTIONAL_LOG2; - break; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_TEMP: + *val = 125; + *val2 = 8; + return IIO_VAL_FRACTIONAL_LOG2; default: - ret = -EINVAL; - break; + return -EINVAL; } - - break; case IIO_CHAN_INFO_SAMP_FREQ: switch (chan->type) { case IIO_CAPACITANCE: - idx = (chip->config & AD7746_CONF_CAPFS_MASK) >> - AD7746_CONF_CAPFS_SHIFT; + idx = FIELD_GET(AD7746_CONF_CAPFS_MASK, chip->config); *val = ad7746_cap_filter_rate_table[idx][0]; - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; case IIO_VOLTAGE: - idx = (chip->config & AD7746_CONF_VTFS_MASK) >> - AD7746_CONF_VTFS_SHIFT; + idx = FIELD_GET(AD7746_CONF_VTFS_MASK, chip->config); *val = ad7746_vt_filter_rate_table[idx][0]; - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; default: - ret = -EINVAL; + return -EINVAL; } - break; default: - ret = -EINVAL; + return -EINVAL; } -out: - mutex_unlock(&chip->lock); - return ret; } static const struct iio_info ad7746_info = { .attrs = &ad7746_attribute_group, .read_raw = ad7746_read_raw, + .read_avail = ad7746_read_avail, .write_raw = ad7746_write_raw, }; @@ -674,10 +730,9 @@ static int ad7746_probe(struct i2c_client *client, indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); if (!indio_dev) return -ENOMEM; + chip = iio_priv(indio_dev); mutex_init(&chip->lock); - /* this is only used for device removal purposes */ - i2c_set_clientdata(client, indio_dev); chip->client = client; chip->capdac_set = -1; @@ -710,24 +765,24 @@ static int ad7746_probe(struct i2c_client *client, if (!ret) { switch (vdd_permille) { case 125: - regval |= AD7746_EXCSETUP_EXCLVL(0); + regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 0); break; case 250: - regval |= AD7746_EXCSETUP_EXCLVL(1); + regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 1); break; case 375: - regval |= AD7746_EXCSETUP_EXCLVL(2); + regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 2); break; case 500: - regval |= AD7746_EXCSETUP_EXCLVL(3); + regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 3); break; default: break; } } - ret = i2c_smbus_write_byte_data(chip->client, - AD7746_REG_EXC_SETUP, regval); + ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_EXC_SETUP, + regval); if (ret < 0) return ret; @@ -740,7 +795,6 @@ static const struct i2c_device_id ad7746_id[] = { { "ad7747", 7747 }, {} }; - MODULE_DEVICE_TABLE(i2c, ad7746_id); static const struct of_device_id ad7746_of_match[] = { @@ -749,7 +803,6 @@ static const struct of_device_id ad7746_of_match[] = { { .compatible = "adi,ad7747" }, { }, }; - MODULE_DEVICE_TABLE(of, ad7746_of_match); static struct i2c_driver ad7746_driver = { diff --git a/drivers/iio/common/scmi_sensors/scmi_iio.c b/drivers/iio/common/scmi_sensors/scmi_iio.c index 793d628db55f..54ccf19ab2bb 100644 --- a/drivers/iio/common/scmi_sensors/scmi_iio.c +++ b/drivers/iio/common/scmi_sensors/scmi_iio.c @@ -18,6 +18,7 @@ #include #include #include +#include #define SCMI_IIO_NUM_OF_AXIS 3 @@ -130,7 +131,6 @@ static const struct iio_buffer_setup_ops scmi_iio_buffer_ops = { static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2) { struct scmi_iio_priv *sensor = iio_priv(iio_dev); - const unsigned long UHZ_PER_HZ = 1000000UL; u64 sec, mult, uHz, sf; u32 sensor_config; char buf[32]; @@ -145,7 +145,7 @@ static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2) return err; } - uHz = val * UHZ_PER_HZ + val2; + uHz = val * MICROHZ_PER_HZ + val2; /* * The seconds field in the sensor interval in SCMI is 16 bits long @@ -156,10 +156,10 @@ static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2) * count the number of characters */ sf = (u64)uHz * 0xFFFF; - do_div(sf, UHZ_PER_HZ); + do_div(sf, MICROHZ_PER_HZ); mult = scnprintf(buf, sizeof(buf), "%llu", sf) - 1; - sec = int_pow(10, mult) * UHZ_PER_HZ; + sec = int_pow(10, mult) * MICROHZ_PER_HZ; do_div(sec, uHz); if (sec == 0) { dev_err(&iio_dev->dev, diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 9910ba1da085..35720c64fea8 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -354,7 +354,7 @@ void st_sensors_dev_name_probe(struct device *dev, char *name, int len) return; /* The name from the match takes precedence if present */ - strlcpy(name, match, len); + strscpy(name, match, len); } EXPORT_SYMBOL_NS(st_sensors_dev_name_probe, IIO_ST_SENSORS); diff --git a/drivers/iio/frequency/adf4371.c b/drivers/iio/frequency/adf4371.c index 135c8cedc33d..b27088464826 100644 --- a/drivers/iio/frequency/adf4371.c +++ b/drivers/iio/frequency/adf4371.c @@ -540,13 +540,6 @@ static int adf4371_setup(struct adf4371_state *st) return regmap_bulk_write(st->regmap, ADF4371_REG(0x30), st->buf, 5); } -static void adf4371_clk_disable(void *data) -{ - struct adf4371_state *st = data; - - clk_disable_unprepare(st->clkin); -} - static int adf4371_probe(struct spi_device *spi) { const struct spi_device_id *id = spi_get_device_id(spi); @@ -579,18 +572,10 @@ static int adf4371_probe(struct spi_device *spi) indio_dev->channels = st->chip_info->channels; indio_dev->num_channels = st->chip_info->num_channels; - st->clkin = devm_clk_get(&spi->dev, "clkin"); + st->clkin = devm_clk_get_enabled(&spi->dev, "clkin"); if (IS_ERR(st->clkin)) return PTR_ERR(st->clkin); - ret = clk_prepare_enable(st->clkin); - if (ret < 0) - return ret; - - ret = devm_add_action_or_reset(&spi->dev, adf4371_clk_disable, st); - if (ret) - return ret; - st->clkin_freq = clk_get_rate(st->clkin); ret = adf4371_setup(st); diff --git a/drivers/iio/frequency/admv1014.c b/drivers/iio/frequency/admv1014.c index 865addd10db4..bb5e1feef42b 100644 --- a/drivers/iio/frequency/admv1014.c +++ b/drivers/iio/frequency/admv1014.c @@ -669,8 +669,7 @@ static int admv1014_init(struct admv1014_state *st) chip_id = FIELD_GET(ADMV1014_CHIP_ID_MSK, chip_id); if (chip_id != ADMV1014_CHIP_ID) { dev_err(&spi->dev, "Invalid Chip ID.\n"); - ret = -EINVAL; - return ret; + return -EINVAL; } ret = __admv1014_spi_update_bits(st, ADMV1014_REG_QUAD, diff --git a/drivers/iio/frequency/adrf6780.c b/drivers/iio/frequency/adrf6780.c index 21878bad0909..b4defb82f37e 100644 --- a/drivers/iio/frequency/adrf6780.c +++ b/drivers/iio/frequency/adrf6780.c @@ -441,11 +441,6 @@ static void adrf6780_properties_parse(struct adrf6780_state *st) st->vdet_out_en = device_property_read_bool(&spi->dev, "adi,vdet-out-en"); } -static void adrf6780_clk_disable(void *data) -{ - clk_disable_unprepare(data); -} - static void adrf6780_powerdown(void *data) { /* Disable all components in the Enable Register */ @@ -473,20 +468,11 @@ static int adrf6780_probe(struct spi_device *spi) adrf6780_properties_parse(st); - st->clkin = devm_clk_get(&spi->dev, "lo_in"); + st->clkin = devm_clk_get_enabled(&spi->dev, "lo_in"); if (IS_ERR(st->clkin)) return dev_err_probe(&spi->dev, PTR_ERR(st->clkin), "failed to get the LO input clock\n"); - ret = clk_prepare_enable(st->clkin); - if (ret) - return ret; - - ret = devm_add_action_or_reset(&spi->dev, adrf6780_clk_disable, - st->clkin); - if (ret) - return ret; - mutex_init(&st->lock); ret = adrf6780_init(st); diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c index ff2b0fab840a..aec55f7e1f26 100644 --- a/drivers/iio/imu/adis16475.c +++ b/drivers/iio/imu/adis16475.c @@ -1120,11 +1120,6 @@ check_burst32: return IRQ_HANDLED; } -static void adis16475_disable_clk(void *data) -{ - clk_disable_unprepare((struct clk *)data); -} - static int adis16475_config_sync_mode(struct adis16475 *st) { int ret; @@ -1150,19 +1145,11 @@ static int adis16475_config_sync_mode(struct adis16475 *st) /* All the other modes require external input signal */ if (sync->sync_mode != ADIS16475_SYNC_OUTPUT) { - struct clk *clk = devm_clk_get(dev, NULL); + struct clk *clk = devm_clk_get_enabled(dev, NULL); if (IS_ERR(clk)) return PTR_ERR(clk); - ret = clk_prepare_enable(clk); - if (ret) - return ret; - - ret = devm_add_action_or_reset(dev, adis16475_disable_clk, clk); - if (ret) - return ret; - st->clk_freq = clk_get_rate(clk); if (st->clk_freq < sync->min_rate || st->clk_freq > sync->max_rate) { diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c index 9b4298095d3f..f7bce428d9eb 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c @@ -65,7 +65,7 @@ static int asus_acpi_get_sensor_info(struct acpi_device *adev, sub_elem = &elem->package.elements[j]; if (sub_elem->type == ACPI_TYPE_STRING) - strlcpy(info->type, sub_elem->string.pointer, + strscpy(info->type, sub_elem->string.pointer, sizeof(info->type)); else if (sub_elem->type == ACPI_TYPE_INTEGER) { if (sub_elem->integer.value != client->addr) { @@ -158,7 +158,7 @@ int inv_mpu_acpi_create_mux_client(struct i2c_client *client) char *name; info.addr = secondary; - strlcpy(info.type, dev_name(&adev->dev), + strscpy(info.type, dev_name(&adev->dev), sizeof(info.type)); name = strchr(info.type, ':'); if (name) diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index acc2b6c05d57..228598b82a2f 100644 --- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -843,8 +843,8 @@ static int iio_verify_update(struct iio_dev *indio_dev, * to verify. */ if (remove_buffer && !insert_buffer && - list_is_singular(&iio_dev_opaque->buffer_list)) - return 0; + list_is_singular(&iio_dev_opaque->buffer_list)) + return 0; modes = indio_dev->modes; @@ -940,6 +940,7 @@ struct iio_demux_table { static void iio_buffer_demux_free(struct iio_buffer *buffer) { struct iio_demux_table *p, *q; + list_for_each_entry_safe(p, q, &buffer->demux_list, l) { list_del(&p->l); kfree(p); diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 0f4dbda3b9d3..583e0e5205a0 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -168,6 +168,7 @@ static const char * const iio_chan_info_postfix[] = { [IIO_CHAN_INFO_OVERSAMPLING_RATIO] = "oversampling_ratio", [IIO_CHAN_INFO_THERMOCOUPLE_TYPE] = "thermocouple_type", [IIO_CHAN_INFO_CALIBAMBIENT] = "calibambient", + [IIO_CHAN_INFO_ZEROPOINT] = "zeropoint", }; /** * iio_device_id() - query the unique ID for the device @@ -236,6 +237,7 @@ static int iio_sysfs_match_string_with_gaps(const char * const *array, size_t n, struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) { struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); + return iio_dev_opaque->debugfs_dentry; } EXPORT_SYMBOL_GPL(iio_get_debugfs_dentry); @@ -447,6 +449,7 @@ static const struct file_operations iio_debugfs_reg_fops = { static void iio_device_unregister_debugfs(struct iio_dev *indio_dev) { struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); + debugfs_remove_recursive(iio_dev_opaque->debugfs_dentry); } @@ -1021,6 +1024,7 @@ int __iio_device_attr_init(struct device_attribute *dev_attr, int ret = 0; char *name = NULL; char *full_postfix; + sysfs_attr_init(&dev_attr->attr); /* Build up postfix of __postfix */ @@ -1299,8 +1303,7 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev, ret = iio_device_add_info_mask_type_avail(indio_dev, chan, IIO_SEPARATE, - &chan-> - info_mask_separate_available); + &chan->info_mask_separate_available); if (ret < 0) return ret; attrcount += ret; @@ -1314,8 +1317,7 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev, ret = iio_device_add_info_mask_type_avail(indio_dev, chan, IIO_SHARED_BY_TYPE, - &chan-> - info_mask_shared_by_type_available); + &chan->info_mask_shared_by_type_available); if (ret < 0) return ret; attrcount += ret; @@ -1355,6 +1357,7 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev, if (chan->ext_info) { unsigned int i = 0; + for (ext_info = chan->ext_info; ext_info->name; ext_info++) { ret = __iio_add_chan_devattr(ext_info->name, chan, @@ -1403,6 +1406,7 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr, char *buf) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); + return sysfs_emit(buf, "%s\n", indio_dev->name); } @@ -1412,6 +1416,7 @@ static ssize_t label_show(struct device *dev, struct device_attribute *attr, char *buf) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); + return sysfs_emit(buf, "%s\n", indio_dev->label); } @@ -1621,6 +1626,8 @@ static void iio_dev_release(struct device *device) iio_device_detach_buffers(indio_dev); + lockdep_unregister_key(&iio_dev_opaque->mlock_key); + ida_free(&iio_ida, iio_dev_opaque->id); kfree(iio_dev_opaque); } @@ -1680,6 +1687,9 @@ struct iio_dev *iio_device_alloc(struct device *parent, int sizeof_priv) INIT_LIST_HEAD(&iio_dev_opaque->buffer_list); INIT_LIST_HEAD(&iio_dev_opaque->ioctl_handlers); + lockdep_register_key(&iio_dev_opaque->mlock_key); + lockdep_set_class(&indio_dev->mlock, &iio_dev_opaque->mlock_key); + return indio_dev; } EXPORT_SYMBOL(iio_device_alloc); @@ -1777,6 +1787,7 @@ static int iio_chrdev_release(struct inode *inode, struct file *filp) struct iio_dev_opaque *iio_dev_opaque = container_of(inode->i_cdev, struct iio_dev_opaque, chrdev); struct iio_dev *indio_dev = &iio_dev_opaque->indio_dev; + kfree(ib); clear_bit(IIO_BUSY_BIT_POS, &iio_dev_opaque->flags); iio_device_put(indio_dev); diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c index b5e059e15b0a..3d78da2531a9 100644 --- a/drivers/iio/industrialio-event.c +++ b/drivers/iio/industrialio-event.c @@ -231,12 +231,15 @@ static const char * const iio_ev_type_text[] = { [IIO_EV_TYPE_MAG_ADAPTIVE] = "mag_adaptive", [IIO_EV_TYPE_CHANGE] = "change", [IIO_EV_TYPE_MAG_REFERENCED] = "mag_referenced", + [IIO_EV_TYPE_GESTURE] = "gesture", }; static const char * const iio_ev_dir_text[] = { [IIO_EV_DIR_EITHER] = "either", [IIO_EV_DIR_RISING] = "rising", - [IIO_EV_DIR_FALLING] = "falling" + [IIO_EV_DIR_FALLING] = "falling", + [IIO_EV_DIR_SINGLETAP] = "singletap", + [IIO_EV_DIR_DOUBLETAP] = "doubletap", }; static const char * const iio_ev_info_text[] = { @@ -247,6 +250,8 @@ static const char * const iio_ev_info_text[] = { [IIO_EV_INFO_HIGH_PASS_FILTER_3DB] = "high_pass_filter_3db", [IIO_EV_INFO_LOW_PASS_FILTER_3DB] = "low_pass_filter_3db", [IIO_EV_INFO_TIMEOUT] = "timeout", + [IIO_EV_INFO_RESET_TIMEOUT] = "reset_timeout", + [IIO_EV_INFO_TAP2_MIN_DELAY] = "tap2_min_delay", }; static enum iio_event_direction iio_ev_attr_dir(struct iio_dev_attr *attr) @@ -354,9 +359,10 @@ static int iio_device_add_event(struct iio_dev *indio_dev, enum iio_shared_by shared_by, const unsigned long *mask) { struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); - ssize_t (*show)(struct device *, struct device_attribute *, char *); - ssize_t (*store)(struct device *, struct device_attribute *, - const char *, size_t); + ssize_t (*show)(struct device *dev, struct device_attribute *attr, + char *buf); + ssize_t (*store)(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len); unsigned int attrcount = 0; unsigned int i; char *postfix; diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c index b78814d869b7..6885a186fe27 100644 --- a/drivers/iio/industrialio-trigger.c +++ b/drivers/iio/industrialio-trigger.c @@ -50,6 +50,7 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr, char *buf) { struct iio_trigger *trig = to_iio_trigger(dev); + return sysfs_emit(buf, "%s\n", trig->name); } diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index df74765d33dc..872fd5c24147 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -5,9 +5,9 @@ */ #include #include +#include #include #include -#include #include #include @@ -45,13 +45,13 @@ int iio_map_array_register(struct iio_dev *indio_dev, struct iio_map *maps) int i = 0, ret = 0; struct iio_map_internal *mapi; - if (maps == NULL) + if (!maps) return 0; mutex_lock(&iio_map_list_lock); - while (maps[i].consumer_dev_name != NULL) { + while (maps[i].consumer_dev_name) { mapi = kzalloc(sizeof(*mapi), GFP_KERNEL); - if (mapi == NULL) { + if (!mapi) { ret = -ENOMEM; goto error_ret; } @@ -69,7 +69,6 @@ error_ret: } EXPORT_SYMBOL_GPL(iio_map_array_register); - /* * Remove all map entries associated with the given iio device */ @@ -117,15 +116,8 @@ static const struct iio_chan_spec return chan; } -#ifdef CONFIG_OF - -static int iio_dev_node_match(struct device *dev, const void *data) -{ - return dev->of_node == data && dev->type == &iio_device_type; -} - /** - * __of_iio_simple_xlate - translate iiospec to the IIO channel index + * __fwnode_iio_simple_xlate - translate iiospec to the IIO channel index * @indio_dev: pointer to the iio_dev structure * @iiospec: IIO specifier as found in the device tree * @@ -134,14 +126,14 @@ static int iio_dev_node_match(struct device *dev, const void *data) * whether IIO index is less than num_channels (that is specified in the * iio_dev). */ -static int __of_iio_simple_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static int __fwnode_iio_simple_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { - if (!iiospec->args_count) + if (!iiospec->nargs) return 0; if (iiospec->args[0] >= indio_dev->num_channels) { - dev_err(&indio_dev->dev, "invalid channel index %u\n", + dev_err(&indio_dev->dev, "invalid channel index %llu\n", iiospec->args[0]); return -EINVAL; } @@ -149,32 +141,33 @@ static int __of_iio_simple_xlate(struct iio_dev *indio_dev, return iiospec->args[0]; } -static int __of_iio_channel_get(struct iio_channel *channel, - struct device_node *np, int index) +static int __fwnode_iio_channel_get(struct iio_channel *channel, + struct fwnode_handle *fwnode, int index) { + struct fwnode_reference_args iiospec; struct device *idev; struct iio_dev *indio_dev; int err; - struct of_phandle_args iiospec; - err = of_parse_phandle_with_args(np, "io-channels", - "#io-channel-cells", - index, &iiospec); + err = fwnode_property_get_reference_args(fwnode, "io-channels", + "#io-channel-cells", 0, + index, &iiospec); if (err) return err; - idev = bus_find_device(&iio_bus_type, NULL, iiospec.np, - iio_dev_node_match); - of_node_put(iiospec.np); - if (idev == NULL) + idev = bus_find_device_by_fwnode(&iio_bus_type, iiospec.fwnode); + if (!idev) { + fwnode_handle_put(iiospec.fwnode); return -EPROBE_DEFER; + } indio_dev = dev_to_iio_dev(idev); channel->indio_dev = indio_dev; - if (indio_dev->info->of_xlate) - index = indio_dev->info->of_xlate(indio_dev, &iiospec); + if (indio_dev->info->fwnode_xlate) + index = indio_dev->info->fwnode_xlate(indio_dev, &iiospec); else - index = __of_iio_simple_xlate(indio_dev, &iiospec); + index = __fwnode_iio_simple_xlate(indio_dev, &iiospec); + fwnode_handle_put(iiospec.fwnode); if (index < 0) goto err_put; channel->channel = &indio_dev->channels[index]; @@ -186,7 +179,8 @@ err_put: return index; } -static struct iio_channel *of_iio_channel_get(struct device_node *np, int index) +static struct iio_channel *fwnode_iio_channel_get(struct fwnode_handle *fwnode, + int index) { struct iio_channel *channel; int err; @@ -195,10 +189,10 @@ static struct iio_channel *of_iio_channel_get(struct device_node *np, int index) return ERR_PTR(-EINVAL); channel = kzalloc(sizeof(*channel), GFP_KERNEL); - if (channel == NULL) + if (!channel) return ERR_PTR(-ENOMEM); - err = __of_iio_channel_get(channel, np, index); + err = __fwnode_iio_channel_get(channel, fwnode, index); if (err) goto err_free_channel; @@ -209,74 +203,116 @@ err_free_channel: return ERR_PTR(err); } -struct iio_channel *of_iio_channel_get_by_name(struct device_node *np, - const char *name) +static struct iio_channel * +__fwnode_iio_channel_get_by_name(struct fwnode_handle *fwnode, const char *name) { - struct iio_channel *chan = NULL; + struct iio_channel *chan; + int index = 0; - /* Walk up the tree of devices looking for a matching iio channel */ - while (np) { - int index = 0; + /* + * For named iio channels, first look up the name in the + * "io-channel-names" property. If it cannot be found, the + * index will be an error code, and fwnode_iio_channel_get() + * will fail. + */ + if (name) + index = fwnode_property_match_string(fwnode, "io-channel-names", + name); - /* - * For named iio channels, first look up the name in the - * "io-channel-names" property. If it cannot be found, the - * index will be an error code, and of_iio_channel_get() - * will fail. - */ - if (name) - index = of_property_match_string(np, "io-channel-names", - name); - chan = of_iio_channel_get(np, index); - if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER) - break; - else if (name && index >= 0) { - pr_err("ERROR: could not get IIO channel %pOF:%s(%i)\n", - np, name ? name : "", index); - return NULL; + chan = fwnode_iio_channel_get(fwnode, index); + if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER) + return chan; + if (name) { + if (index >= 0) { + pr_err("ERROR: could not get IIO channel %pfw:%s(%i)\n", + fwnode, name, index); + /* + * In this case, we found 'name' in 'io-channel-names' + * but somehow we still fail so that we should not proceed + * with any other lookup. Hence, explicitly return -EINVAL + * (maybe not the better error code) so that the caller + * won't do a system lookup. + */ + return ERR_PTR(-EINVAL); } - /* - * No matching IIO channel found on this node. - * If the parent node has a "io-channel-ranges" property, - * then we can try one of its channels. + * If index < 0, then fwnode_property_get_reference_args() fails + * with -EINVAL or -ENOENT (ACPI case) which is expected. We + * should not proceed if we get any other error. */ - np = np->parent; - if (np && !of_get_property(np, "io-channel-ranges", NULL)) - return NULL; + if (PTR_ERR(chan) != -EINVAL && PTR_ERR(chan) != -ENOENT) + return chan; + } else if (PTR_ERR(chan) != -ENOENT) { + /* + * if !name, then we should only proceed the lookup if + * fwnode_property_get_reference_args() returns -ENOENT. + */ + return chan; } - return chan; + /* so we continue the lookup */ + return ERR_PTR(-ENODEV); } -EXPORT_SYMBOL_GPL(of_iio_channel_get_by_name); -static struct iio_channel *of_iio_channel_get_all(struct device *dev) +struct iio_channel *fwnode_iio_channel_get_by_name(struct fwnode_handle *fwnode, + const char *name) { + struct fwnode_handle *parent; + struct iio_channel *chan; + + /* Walk up the tree of devices looking for a matching iio channel */ + chan = __fwnode_iio_channel_get_by_name(fwnode, name); + if (!IS_ERR(chan) || PTR_ERR(chan) != -ENODEV) + return chan; + + /* + * No matching IIO channel found on this node. + * If the parent node has a "io-channel-ranges" property, + * then we can try one of its channels. + */ + fwnode_for_each_parent_node(fwnode, parent) { + if (!fwnode_property_present(parent, "io-channel-ranges")) { + fwnode_handle_put(parent); + return ERR_PTR(-ENODEV); + } + + chan = __fwnode_iio_channel_get_by_name(fwnode, name); + if (!IS_ERR(chan) || PTR_ERR(chan) != -ENODEV) { + fwnode_handle_put(parent); + return chan; + } + } + + return ERR_PTR(-ENODEV); +} +EXPORT_SYMBOL_GPL(fwnode_iio_channel_get_by_name); + +static struct iio_channel *fwnode_iio_channel_get_all(struct device *dev) +{ + struct fwnode_handle *fwnode = dev_fwnode(dev); struct iio_channel *chans; int i, mapind, nummaps = 0; int ret; do { - ret = of_parse_phandle_with_args(dev->of_node, - "io-channels", - "#io-channel-cells", - nummaps, NULL); + ret = fwnode_property_get_reference_args(fwnode, "io-channels", + "#io-channel-cells", 0, + nummaps, NULL); if (ret < 0) break; } while (++nummaps); - if (nummaps == 0) /* no error, return NULL to search map table */ - return NULL; + if (nummaps == 0) + return ERR_PTR(-ENODEV); /* NULL terminated array to save passing size */ chans = kcalloc(nummaps + 1, sizeof(*chans), GFP_KERNEL); - if (chans == NULL) + if (!chans) return ERR_PTR(-ENOMEM); - /* Search for OF matches */ + /* Search for FW matches */ for (mapind = 0; mapind < nummaps; mapind++) { - ret = __of_iio_channel_get(&chans[mapind], dev->of_node, - mapind); + ret = __fwnode_iio_channel_get(&chans[mapind], fwnode, mapind); if (ret) goto error_free_chans; } @@ -289,15 +325,6 @@ error_free_chans: return ERR_PTR(ret); } -#else /* CONFIG_OF */ - -static inline struct iio_channel *of_iio_channel_get_all(struct device *dev) -{ - return NULL; -} - -#endif /* CONFIG_OF */ - static struct iio_channel *iio_channel_get_sys(const char *name, const char *channel_name) { @@ -305,7 +332,7 @@ static struct iio_channel *iio_channel_get_sys(const char *name, struct iio_channel *channel; int err; - if (name == NULL && channel_name == NULL) + if (!(name || channel_name)) return ERR_PTR(-ENODEV); /* first find matching entry the channel map */ @@ -320,11 +347,11 @@ static struct iio_channel *iio_channel_get_sys(const char *name, break; } mutex_unlock(&iio_map_list_lock); - if (c == NULL) + if (!c) return ERR_PTR(-ENODEV); channel = kzalloc(sizeof(*channel), GFP_KERNEL); - if (channel == NULL) { + if (!channel) { err = -ENOMEM; goto error_no_mem; } @@ -336,7 +363,7 @@ static struct iio_channel *iio_channel_get_sys(const char *name, iio_chan_spec_from_name(channel->indio_dev, c->map->adc_channel_label); - if (channel->channel == NULL) { + if (!channel->channel) { err = -EINVAL; goto error_no_chan; } @@ -358,9 +385,9 @@ struct iio_channel *iio_channel_get(struct device *dev, struct iio_channel *channel; if (dev) { - channel = of_iio_channel_get_by_name(dev->of_node, - channel_name); - if (channel != NULL) + channel = fwnode_iio_channel_get_by_name(dev_fwnode(dev), + channel_name); + if (!IS_ERR(channel) || PTR_ERR(channel) != -ENODEV) return channel; } @@ -400,14 +427,14 @@ struct iio_channel *devm_iio_channel_get(struct device *dev, } EXPORT_SYMBOL_GPL(devm_iio_channel_get); -struct iio_channel *devm_of_iio_channel_get_by_name(struct device *dev, - struct device_node *np, - const char *channel_name) +struct iio_channel *devm_fwnode_iio_channel_get_by_name(struct device *dev, + struct fwnode_handle *fwnode, + const char *channel_name) { struct iio_channel *channel; int ret; - channel = of_iio_channel_get_by_name(np, channel_name); + channel = fwnode_iio_channel_get_by_name(fwnode, channel_name); if (IS_ERR(channel)) return channel; @@ -417,7 +444,7 @@ struct iio_channel *devm_of_iio_channel_get_by_name(struct device *dev, return channel; } -EXPORT_SYMBOL_GPL(devm_of_iio_channel_get_by_name); +EXPORT_SYMBOL_GPL(devm_fwnode_iio_channel_get_by_name); struct iio_channel *iio_channel_get_all(struct device *dev) { @@ -428,11 +455,15 @@ struct iio_channel *iio_channel_get_all(struct device *dev) int mapind = 0; int i, ret; - if (dev == NULL) + if (!dev) return ERR_PTR(-EINVAL); - chans = of_iio_channel_get_all(dev); - if (chans) + chans = fwnode_iio_channel_get_all(dev); + /* + * We only want to carry on if the error is -ENODEV. Anything else + * should be reported up the stack. + */ + if (!IS_ERR(chans) || PTR_ERR(chans) != -ENODEV) return chans; name = dev_name(dev); @@ -452,7 +483,7 @@ struct iio_channel *iio_channel_get_all(struct device *dev) /* NULL terminated array to save passing size */ chans = kcalloc(nummaps + 1, sizeof(*chans), GFP_KERNEL); - if (chans == NULL) { + if (!chans) { ret = -ENOMEM; goto error_ret; } @@ -466,7 +497,7 @@ struct iio_channel *iio_channel_get_all(struct device *dev) chans[mapind].channel = iio_chan_spec_from_name(chans[mapind].indio_dev, c->map->adc_channel_label); - if (chans[mapind].channel == NULL) { + if (!chans[mapind].channel) { ret = -EINVAL; goto error_free_chans; } @@ -528,14 +559,14 @@ struct iio_channel *devm_iio_channel_get_all(struct device *dev) EXPORT_SYMBOL_GPL(devm_iio_channel_get_all); static int iio_channel_read(struct iio_channel *chan, int *val, int *val2, - enum iio_chan_info_enum info) + enum iio_chan_info_enum info) { int unused; int vals[INDIO_MAX_RAW_ELEMENTS]; int ret; int val_len = 2; - if (val2 == NULL) + if (!val2) val2 = &unused; if (!iio_channel_has_info(chan->channel, info)) @@ -547,9 +578,10 @@ static int iio_channel_read(struct iio_channel *chan, int *val, int *val2, vals, &val_len, info); *val = vals[0]; *val2 = vals[1]; - } else + } else { ret = chan->indio_dev->info->read_raw(chan->indio_dev, chan->channel, val, val2, info); + } return ret; } @@ -560,7 +592,7 @@ int iio_read_channel_raw(struct iio_channel *chan, int *val) int ret; mutex_lock(&iio_dev_opaque->info_exist_lock); - if (chan->indio_dev->info == NULL) { + if (!chan->indio_dev->info) { ret = -ENODEV; goto err_unlock; } @@ -579,7 +611,7 @@ int iio_read_channel_average_raw(struct iio_channel *chan, int *val) int ret; mutex_lock(&iio_dev_opaque->info_exist_lock); - if (chan->indio_dev->info == NULL) { + if (!chan->indio_dev->info) { ret = -ENODEV; goto err_unlock; } @@ -593,7 +625,8 @@ err_unlock: EXPORT_SYMBOL_GPL(iio_read_channel_average_raw); static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan, - int raw, int *processed, unsigned int scale) + int raw, int *processed, + unsigned int scale) { int scale_type, scale_val, scale_val2; int offset_type, offset_val, offset_val2; @@ -626,7 +659,7 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan, } scale_type = iio_channel_read(chan, &scale_val, &scale_val2, - IIO_CHAN_INFO_SCALE); + IIO_CHAN_INFO_SCALE); if (scale_type < 0) { /* * If no channel scaling is available apply consumer scale to @@ -671,19 +704,19 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan, } int iio_convert_raw_to_processed(struct iio_channel *chan, int raw, - int *processed, unsigned int scale) + int *processed, unsigned int scale) { struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(chan->indio_dev); int ret; mutex_lock(&iio_dev_opaque->info_exist_lock); - if (chan->indio_dev->info == NULL) { + if (!chan->indio_dev->info) { ret = -ENODEV; goto err_unlock; } ret = iio_convert_raw_to_processed_unlocked(chan, raw, processed, - scale); + scale); err_unlock: mutex_unlock(&iio_dev_opaque->info_exist_lock); @@ -698,7 +731,7 @@ int iio_read_channel_attribute(struct iio_channel *chan, int *val, int *val2, int ret; mutex_lock(&iio_dev_opaque->info_exist_lock); - if (chan->indio_dev->info == NULL) { + if (!chan->indio_dev->info) { ret = -ENODEV; goto err_unlock; } @@ -724,7 +757,7 @@ int iio_read_channel_processed_scale(struct iio_channel *chan, int *val, int ret; mutex_lock(&iio_dev_opaque->info_exist_lock); - if (chan->indio_dev->info == NULL) { + if (!chan->indio_dev->info) { ret = -ENODEV; goto err_unlock; } @@ -802,7 +835,7 @@ int iio_read_avail_channel_raw(struct iio_channel *chan, int type; ret = iio_read_avail_channel_attribute(chan, vals, &type, length, - IIO_CHAN_INFO_RAW); + IIO_CHAN_INFO_RAW); if (ret >= 0 && type != IIO_VAL_INT) /* raw values are assumed to be IIO_VAL_INT */ @@ -886,7 +919,7 @@ int iio_get_channel_type(struct iio_channel *chan, enum iio_chan_type *type) /* Need to verify underlying driver has not gone away */ mutex_lock(&iio_dev_opaque->info_exist_lock); - if (chan->indio_dev->info == NULL) { + if (!chan->indio_dev->info) { ret = -ENODEV; goto err_unlock; } @@ -913,7 +946,7 @@ int iio_write_channel_attribute(struct iio_channel *chan, int val, int val2, int ret; mutex_lock(&iio_dev_opaque->info_exist_lock); - if (chan->indio_dev->info == NULL) { + if (!chan->indio_dev->info) { ret = -ENODEV; goto err_unlock; } @@ -947,9 +980,8 @@ unsigned int iio_get_channel_ext_info_count(struct iio_channel *chan) } EXPORT_SYMBOL_GPL(iio_get_channel_ext_info_count); -static const struct iio_chan_spec_ext_info *iio_lookup_ext_info( - const struct iio_channel *chan, - const char *attr) +static const struct iio_chan_spec_ext_info * +iio_lookup_ext_info(const struct iio_channel *chan, const char *attr) { const struct iio_chan_spec_ext_info *ext_info; diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 8537e88f02e3..7cf6e8490123 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -331,6 +331,17 @@ config LTR501 This driver can also be built as a module. If so, the module will be called ltr501. +config LTRF216A + tristate "Liteon LTRF216A Light Sensor" + depends on I2C + select REGMAP_I2C + help + If you say Y or M here, you get support for Liteon LTRF216A + Ambient Light Sensor. + + If built as a dynamically linked module, it will be called + ltrf216a. + config LV0104CS tristate "LV0104CS Ambient Light Sensor" depends on I2C diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index d10912faf964..6f23817fae6f 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_ISL29125) += isl29125.o obj-$(CONFIG_JSA1212) += jsa1212.o obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o obj-$(CONFIG_LTR501) += ltr501.o +obj-$(CONFIG_LTRF216A) += ltrf216a.o obj-$(CONFIG_LV0104CS) += lv0104cs.o obj-$(CONFIG_MAX44000) += max44000.o obj-$(CONFIG_MAX44009) += max44009.o diff --git a/drivers/iio/light/ltrf216a.c b/drivers/iio/light/ltrf216a.c new file mode 100644 index 000000000000..4b8ef36b6912 --- /dev/null +++ b/drivers/iio/light/ltrf216a.c @@ -0,0 +1,550 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * LTRF216A Ambient Light Sensor + * + * Copyright (C) 2022 Collabora, Ltd. + * Author: Shreeya Patel + * + * Copyright (C) 2021 Lite-On Technology Corp (Singapore) + * Author: Shi Zhigang + * + * IIO driver for LTRF216A (7-bit I2C slave address 0x53). + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#define LTRF216A_ALS_RESET_MASK BIT(4) +#define LTRF216A_ALS_DATA_STATUS BIT(3) +#define LTRF216A_ALS_ENABLE_MASK BIT(1) +#define LTRF216A_MAIN_CTRL 0x00 +#define LTRF216A_ALS_MEAS_RES 0x04 +#define LTRF216A_ALS_GAIN 0x05 +#define LTRF216A_PART_ID 0x06 +#define LTRF216A_MAIN_STATUS 0x07 +#define LTRF216A_ALS_CLEAR_DATA_0 0x0a +#define LTRF216A_ALS_CLEAR_DATA_1 0x0b +#define LTRF216A_ALS_CLEAR_DATA_2 0x0c +#define LTRF216A_ALS_DATA_0 0x0d +#define LTRF216A_ALS_DATA_1 0x0e +#define LTRF216A_ALS_DATA_2 0x0f +#define LTRF216A_INT_CFG 0x19 +#define LTRF216A_INT_PST 0x1a +#define LTRF216A_ALS_THRES_UP_0 0x21 +#define LTRF216A_ALS_THRES_UP_1 0x22 +#define LTRF216A_ALS_THRES_UP_2 0x23 +#define LTRF216A_ALS_THRES_LOW_0 0x24 +#define LTRF216A_ALS_THRES_LOW_1 0x25 +#define LTRF216A_ALS_THRES_LOW_2 0x26 +#define LTRF216A_ALS_READ_DATA_DELAY_US 20000 + +static const int ltrf216a_int_time_available[][2] = { + { 0, 400000 }, + { 0, 200000 }, + { 0, 100000 }, + { 0, 50000 }, + { 0, 25000 }, +}; + +static const int ltrf216a_int_time_reg[][2] = { + { 400, 0x03 }, + { 200, 0x13 }, + { 100, 0x22 }, + { 50, 0x31 }, + { 25, 0x40 }, +}; + +/* + * Window Factor is needed when the device is under Window glass + * with coated tinted ink. This is to compensate for the light loss + * due to the lower transmission rate of the window glass and helps + * in calculating lux. + */ +#define LTRF216A_WIN_FAC 1 + +struct ltrf216a_data { + struct regmap *regmap; + struct i2c_client *client; + u32 int_time; + u16 int_time_fac; + u8 als_gain_fac; + /* + * Protects regmap accesses and makes sure integration time + * remains constant during the measurement of lux. + */ + struct mutex lock; +}; + +static const struct iio_chan_spec ltrf216a_channels[] = { + { + .type = IIO_LIGHT, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_INT_TIME), + .info_mask_separate_available = + BIT(IIO_CHAN_INFO_INT_TIME), + }, +}; + +static void ltrf216a_reset(struct iio_dev *indio_dev) +{ + struct ltrf216a_data *data = iio_priv(indio_dev); + + /* reset sensor, chip fails to respond to this, so ignore any errors */ + regmap_write(data->regmap, LTRF216A_MAIN_CTRL, LTRF216A_ALS_RESET_MASK); + + /* reset time */ + usleep_range(1000, 2000); +} + +static int ltrf216a_enable(struct iio_dev *indio_dev) +{ + struct ltrf216a_data *data = iio_priv(indio_dev); + struct device *dev = &data->client->dev; + int ret; + + /* enable sensor */ + ret = regmap_set_bits(data->regmap, + LTRF216A_MAIN_CTRL, LTRF216A_ALS_ENABLE_MASK); + if (ret) { + dev_err(dev, "failed to enable sensor: %d\n", ret); + return ret; + } + + /* sleep for one integration cycle after enabling the device */ + msleep(ltrf216a_int_time_reg[0][0]); + + return 0; +} + +static int ltrf216a_disable(struct iio_dev *indio_dev) +{ + struct ltrf216a_data *data = iio_priv(indio_dev); + struct device *dev = &data->client->dev; + int ret; + + ret = regmap_write(data->regmap, LTRF216A_MAIN_CTRL, 0); + if (ret) + dev_err(dev, "failed to disable sensor: %d\n", ret); + + return ret; +} + +static void ltrf216a_cleanup(void *data) +{ + struct iio_dev *indio_dev = data; + + ltrf216a_disable(indio_dev); +} + +static int ltrf216a_set_int_time(struct ltrf216a_data *data, int itime) +{ + struct device *dev = &data->client->dev; + unsigned int i; + u8 reg_val; + int ret; + + for (i = 0; i < ARRAY_SIZE(ltrf216a_int_time_available); i++) { + if (ltrf216a_int_time_available[i][1] == itime) + break; + } + if (i == ARRAY_SIZE(ltrf216a_int_time_available)) + return -EINVAL; + + reg_val = ltrf216a_int_time_reg[i][1]; + + ret = regmap_write(data->regmap, LTRF216A_ALS_MEAS_RES, reg_val); + if (ret) { + dev_err(dev, "failed to set integration time: %d\n", ret); + return ret; + } + + data->int_time_fac = ltrf216a_int_time_reg[i][0]; + data->int_time = itime; + + return 0; +} + +static int ltrf216a_get_int_time(struct ltrf216a_data *data, + int *val, int *val2) +{ + *val = 0; + *val2 = data->int_time; + return IIO_VAL_INT_PLUS_MICRO; +} + +static int ltrf216a_set_power_state(struct ltrf216a_data *data, bool on) +{ + struct device *dev = &data->client->dev; + int ret = 0; + + if (on) { + ret = pm_runtime_resume_and_get(dev); + if (ret) { + dev_err(dev, "failed to resume runtime PM: %d\n", ret); + return ret; + } + } else { + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + } + + return ret; +} + +static int ltrf216a_read_data(struct ltrf216a_data *data, u8 addr) +{ + struct device *dev = &data->client->dev; + int ret, val; + u8 buf[3]; + + ret = regmap_read_poll_timeout(data->regmap, LTRF216A_MAIN_STATUS, + val, val & LTRF216A_ALS_DATA_STATUS, + LTRF216A_ALS_READ_DATA_DELAY_US, + LTRF216A_ALS_READ_DATA_DELAY_US * 50); + if (ret) { + dev_err(dev, "failed to wait for measurement data: %d\n", ret); + return ret; + } + + ret = regmap_bulk_read(data->regmap, addr, buf, sizeof(buf)); + if (ret) { + dev_err(dev, "failed to read measurement data: %d\n", ret); + return ret; + } + + return get_unaligned_le24(&buf[0]); +} + +static int ltrf216a_get_lux(struct ltrf216a_data *data) +{ + int ret, greendata; + u64 lux, div; + + ret = ltrf216a_set_power_state(data, true); + if (ret) + return ret; + + greendata = ltrf216a_read_data(data, LTRF216A_ALS_DATA_0); + if (greendata < 0) + return greendata; + + ltrf216a_set_power_state(data, false); + + lux = greendata * 45 * LTRF216A_WIN_FAC * 100; + div = data->als_gain_fac * data->int_time_fac * 100; + + return div_u64(lux, div); +} + +static int ltrf216a_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct ltrf216a_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = ltrf216a_set_power_state(data, true); + if (ret) + return ret; + mutex_lock(&data->lock); + ret = ltrf216a_read_data(data, LTRF216A_ALS_DATA_0); + mutex_unlock(&data->lock); + ltrf216a_set_power_state(data, false); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_PROCESSED: + mutex_lock(&data->lock); + ret = ltrf216a_get_lux(data); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_INT_TIME: + mutex_lock(&data->lock); + ret = ltrf216a_get_int_time(data, val, val2); + mutex_unlock(&data->lock); + return ret; + default: + return -EINVAL; + } +} + +static int ltrf216a_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct ltrf216a_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + if (val != 0) + return -EINVAL; + mutex_lock(&data->lock); + ret = ltrf216a_set_int_time(data, val2); + mutex_unlock(&data->lock); + return ret; + default: + return -EINVAL; + } +} + +static int ltrf216a_read_available(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + *length = ARRAY_SIZE(ltrf216a_int_time_available) * 2; + *vals = (const int *)ltrf216a_int_time_available; + *type = IIO_VAL_INT_PLUS_MICRO; + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static const struct iio_info ltrf216a_info = { + .read_raw = ltrf216a_read_raw, + .write_raw = ltrf216a_write_raw, + .read_avail = ltrf216a_read_available, +}; + +static bool ltrf216a_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTRF216A_MAIN_CTRL: + case LTRF216A_ALS_MEAS_RES: + case LTRF216A_ALS_GAIN: + case LTRF216A_PART_ID: + case LTRF216A_MAIN_STATUS: + case LTRF216A_ALS_CLEAR_DATA_0: + case LTRF216A_ALS_CLEAR_DATA_1: + case LTRF216A_ALS_CLEAR_DATA_2: + case LTRF216A_ALS_DATA_0: + case LTRF216A_ALS_DATA_1: + case LTRF216A_ALS_DATA_2: + case LTRF216A_INT_CFG: + case LTRF216A_INT_PST: + case LTRF216A_ALS_THRES_UP_0: + case LTRF216A_ALS_THRES_UP_1: + case LTRF216A_ALS_THRES_UP_2: + case LTRF216A_ALS_THRES_LOW_0: + case LTRF216A_ALS_THRES_LOW_1: + case LTRF216A_ALS_THRES_LOW_2: + return true; + default: + return false; + } +} + +static bool ltrf216a_writable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTRF216A_MAIN_CTRL: + case LTRF216A_ALS_MEAS_RES: + case LTRF216A_ALS_GAIN: + case LTRF216A_INT_CFG: + case LTRF216A_INT_PST: + case LTRF216A_ALS_THRES_UP_0: + case LTRF216A_ALS_THRES_UP_1: + case LTRF216A_ALS_THRES_UP_2: + case LTRF216A_ALS_THRES_LOW_0: + case LTRF216A_ALS_THRES_LOW_1: + case LTRF216A_ALS_THRES_LOW_2: + return true; + default: + return false; + } +} + +static bool ltrf216a_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTRF216A_MAIN_STATUS: + case LTRF216A_ALS_CLEAR_DATA_0: + case LTRF216A_ALS_CLEAR_DATA_1: + case LTRF216A_ALS_CLEAR_DATA_2: + case LTRF216A_ALS_DATA_0: + case LTRF216A_ALS_DATA_1: + case LTRF216A_ALS_DATA_2: + return true; + default: + return false; + } +} + +static bool ltrf216a_precious_reg(struct device *dev, unsigned int reg) +{ + return reg == LTRF216A_MAIN_STATUS; +} + +static const struct regmap_config ltrf216a_regmap_config = { + .name = "ltrf216a", + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .max_register = LTRF216A_ALS_THRES_LOW_2, + .readable_reg = ltrf216a_readable_reg, + .writeable_reg = ltrf216a_writable_reg, + .volatile_reg = ltrf216a_volatile_reg, + .precious_reg = ltrf216a_precious_reg, + .disable_locking = true, +}; + +static int ltrf216a_probe(struct i2c_client *client) +{ + struct ltrf216a_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + + data->regmap = devm_regmap_init_i2c(client, <rf216a_regmap_config); + if (IS_ERR(data->regmap)) + return dev_err_probe(&client->dev, PTR_ERR(data->regmap), + "regmap initialization failed\n"); + + i2c_set_clientdata(client, indio_dev); + data->client = client; + + mutex_init(&data->lock); + + indio_dev->info = <rf216a_info; + indio_dev->name = "ltrf216a"; + indio_dev->channels = ltrf216a_channels; + indio_dev->num_channels = ARRAY_SIZE(ltrf216a_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = pm_runtime_set_active(&client->dev); + if (ret) + return ret; + + /* reset sensor, chip fails to respond to this, so ignore any errors */ + ltrf216a_reset(indio_dev); + + ret = regmap_reinit_cache(data->regmap, <rf216a_regmap_config); + if (ret) + return dev_err_probe(&client->dev, ret, + "failed to reinit regmap cache\n"); + + ret = ltrf216a_enable(indio_dev); + if (ret) + return ret; + + ret = devm_add_action_or_reset(&client->dev, ltrf216a_cleanup, + indio_dev); + if (ret) + return ret; + + ret = devm_pm_runtime_enable(&client->dev); + if (ret) + return dev_err_probe(&client->dev, ret, + "failed to enable runtime PM\n"); + + pm_runtime_set_autosuspend_delay(&client->dev, 1000); + pm_runtime_use_autosuspend(&client->dev); + + data->int_time = 100000; + data->int_time_fac = 100; + data->als_gain_fac = 3; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static int ltrf216a_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct ltrf216a_data *data = iio_priv(indio_dev); + int ret; + + ret = ltrf216a_disable(indio_dev); + if (ret) + return ret; + + regcache_cache_only(data->regmap, true); + + return 0; +} + +static int ltrf216a_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct ltrf216a_data *data = iio_priv(indio_dev); + int ret; + + regcache_cache_only(data->regmap, false); + regcache_mark_dirty(data->regmap); + ret = regcache_sync(data->regmap); + if (ret) + goto cache_only; + + ret = ltrf216a_enable(indio_dev); + if (ret) + goto cache_only; + + return 0; + +cache_only: + regcache_cache_only(data->regmap, true); + + return ret; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(ltrf216a_pm_ops, ltrf216a_runtime_suspend, + ltrf216a_runtime_resume, NULL); + +static const struct i2c_device_id ltrf216a_id[] = { + { "ltrf216a" }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ltrf216a_id); + +static const struct of_device_id ltrf216a_of_match[] = { + { .compatible = "liteon,ltrf216a" }, + { .compatible = "ltr,ltrf216a" }, + {} +}; +MODULE_DEVICE_TABLE(of, ltrf216a_of_match); + +static struct i2c_driver ltrf216a_driver = { + .driver = { + .name = "ltrf216a", + .pm = pm_ptr(<rf216a_pm_ops), + .of_match_table = ltrf216a_of_match, + }, + .probe_new = ltrf216a_probe, + .id_table = ltrf216a_id, +}; +module_i2c_driver(ltrf216a_driver); + +MODULE_AUTHOR("Shreeya Patel "); +MODULE_AUTHOR("Shi Zhigang "); +MODULE_DESCRIPTION("LTRF216A ambient light sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index 07eb619bcfe8..b91fc5e6a26e 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -216,8 +216,8 @@ config YAMAHA_YAS530 select IIO_TRIGGERED_BUFFER help Say Y here to add support for the Yamaha YAS530 series of - 3-Axis Magnetometers. Right now YAS530, YAS532 and YAS533 are - fully supported. + 3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are + supported. This driver can also be compiled as a module. To compile this driver as a module, choose M here: the module diff --git a/drivers/iio/magnetometer/hmc5843.h b/drivers/iio/magnetometer/hmc5843.h index 9120c8bbf3dd..60fbb5431c88 100644 --- a/drivers/iio/magnetometer/hmc5843.h +++ b/drivers/iio/magnetometer/hmc5843.h @@ -52,16 +52,5 @@ int hmc5843_common_probe(struct device *dev, struct regmap *regmap, enum hmc5843_ids id, const char *name); void hmc5843_common_remove(struct device *dev); -int hmc5843_common_suspend(struct device *dev); -int hmc5843_common_resume(struct device *dev); - -#ifdef CONFIG_PM_SLEEP -static __maybe_unused SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, - hmc5843_common_suspend, - hmc5843_common_resume); -#define HMC5843_PM_OPS (&hmc5843_pm_ops) -#else -#define HMC5843_PM_OPS NULL -#endif - +extern const struct dev_pm_ops hmc5843_pm_ops; #endif /* HMC5843_CORE_H */ diff --git a/drivers/iio/magnetometer/hmc5843_core.c b/drivers/iio/magnetometer/hmc5843_core.c index 4a63b2da9df0..c5521d61da29 100644 --- a/drivers/iio/magnetometer/hmc5843_core.c +++ b/drivers/iio/magnetometer/hmc5843_core.c @@ -603,19 +603,19 @@ static const struct iio_info hmc5843_info = { static const unsigned long hmc5843_scan_masks[] = {0x7, 0}; -int hmc5843_common_suspend(struct device *dev) +static int hmc5843_common_suspend(struct device *dev) { return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)), HMC5843_MODE_SLEEP); } -EXPORT_SYMBOL_NS(hmc5843_common_suspend, IIO_HMC5843); -int hmc5843_common_resume(struct device *dev) +static int hmc5843_common_resume(struct device *dev) { return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)), HMC5843_MODE_CONVERSION_CONTINUOUS); } -EXPORT_SYMBOL_NS(hmc5843_common_resume, IIO_HMC5843); +EXPORT_NS_SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, hmc5843_common_suspend, + hmc5843_common_resume, IIO_HMC5843); int hmc5843_common_probe(struct device *dev, struct regmap *regmap, enum hmc5843_ids id, const char *name) diff --git a/drivers/iio/magnetometer/hmc5843_i2c.c b/drivers/iio/magnetometer/hmc5843_i2c.c index 8d2ff8fc204d..825a881d37fb 100644 --- a/drivers/iio/magnetometer/hmc5843_i2c.c +++ b/drivers/iio/magnetometer/hmc5843_i2c.c @@ -93,7 +93,7 @@ MODULE_DEVICE_TABLE(of, hmc5843_of_match); static struct i2c_driver hmc5843_driver = { .driver = { .name = "hmc5843", - .pm = HMC5843_PM_OPS, + .pm = pm_sleep_ptr(&hmc5843_pm_ops), .of_match_table = hmc5843_of_match, }, .id_table = hmc5843_id, diff --git a/drivers/iio/magnetometer/hmc5843_spi.c b/drivers/iio/magnetometer/hmc5843_spi.c index 8403f09aba39..c42d2e2a6a6c 100644 --- a/drivers/iio/magnetometer/hmc5843_spi.c +++ b/drivers/iio/magnetometer/hmc5843_spi.c @@ -86,13 +86,13 @@ static const struct spi_device_id hmc5843_id[] = { MODULE_DEVICE_TABLE(spi, hmc5843_id); static struct spi_driver hmc5843_driver = { - .driver = { - .name = "hmc5843", - .pm = HMC5843_PM_OPS, - }, - .id_table = hmc5843_id, - .probe = hmc5843_spi_probe, - .remove = hmc5843_spi_remove, + .driver = { + .name = "hmc5843", + .pm = pm_sleep_ptr(&hmc5843_pm_ops), + }, + .id_table = hmc5843_id, + .probe = hmc5843_spi_probe, + .remove = hmc5843_spi_remove, }; module_spi_driver(hmc5843_driver); diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c index aeaa4da6923b..fdb92a6420e1 100644 --- a/drivers/iio/magnetometer/yamaha-yas530.c +++ b/drivers/iio/magnetometer/yamaha-yas530.c @@ -10,13 +10,16 @@ * (YAS534 is a magnetic switch, not handled) * YAS535 MS-6C * YAS536 MS-3W - * YAS537 MS-3T (2015 Samsung Galaxy S6, Note 5, Xiaomi) + * YAS537 MS-3T (2015 Samsung Galaxy S6, Note 5, Galaxy S7) * YAS539 MS-3S (2018 Samsung Galaxy A7 SM-A750FN) * * Code functions found in the MPU3050 YAS530 and YAS532 drivers * named "inv_compass" in the Tegra Android kernel tree. * Copyright (C) 2012 InvenSense Corporation * + * Code functions for YAS537 based on Yamaha Android kernel driver. + * Copyright (c) 2014 Yamaha Corporation + * * Author: Linus Walleij */ #include @@ -29,9 +32,11 @@ #include #include #include +#include #include #include #include +#include #include #include @@ -40,20 +45,39 @@ #include -/* This register map covers YAS530 and YAS532 but differs in YAS 537 and YAS539 */ +/* Commonly used registers */ #define YAS5XX_DEVICE_ID 0x80 -#define YAS5XX_ACTUATE_INIT_COIL 0x81 -#define YAS5XX_MEASURE 0x82 -#define YAS5XX_CONFIG 0x83 -#define YAS5XX_MEASURE_INTERVAL 0x84 -#define YAS5XX_OFFSET_X 0x85 /* [-31 .. 31] */ -#define YAS5XX_OFFSET_Y1 0x86 /* [-31 .. 31] */ -#define YAS5XX_OFFSET_Y2 0x87 /* [-31 .. 31] */ -#define YAS5XX_TEST1 0x88 -#define YAS5XX_TEST2 0x89 -#define YAS5XX_CAL 0x90 #define YAS5XX_MEASURE_DATA 0xB0 +/* These registers are used by YAS530, YAS532 and YAS533 */ +#define YAS530_ACTUATE_INIT_COIL 0x81 +#define YAS530_MEASURE 0x82 +#define YAS530_CONFIG 0x83 +#define YAS530_MEASURE_INTERVAL 0x84 +#define YAS530_OFFSET_X 0x85 /* [-31 .. 31] */ +#define YAS530_OFFSET_Y1 0x86 /* [-31 .. 31] */ +#define YAS530_OFFSET_Y2 0x87 /* [-31 .. 31] */ +#define YAS530_TEST1 0x88 +#define YAS530_TEST2 0x89 +#define YAS530_CAL 0x90 + +/* Registers used by YAS537 */ +#define YAS537_MEASURE 0x81 /* Originally YAS537_REG_CMDR */ +#define YAS537_CONFIG 0x82 /* Originally YAS537_REG_CONFR */ +#define YAS537_MEASURE_INTERVAL 0x83 /* Originally YAS537_REG_INTRVLR */ +#define YAS537_OFFSET_X 0x84 /* Originally YAS537_REG_OXR */ +#define YAS537_OFFSET_Y1 0x85 /* Originally YAS537_REG_OY1R */ +#define YAS537_OFFSET_Y2 0x86 /* Originally YAS537_REG_OY2R */ +#define YAS537_AVR 0x87 +#define YAS537_HCK 0x88 +#define YAS537_LCK 0x89 +#define YAS537_SRST 0x90 +#define YAS537_ADCCAL 0x91 +#define YAS537_MTC 0x93 +#define YAS537_OC 0x9E +#define YAS537_TRM 0x9F +#define YAS537_CAL 0xC0 + /* Bits in the YAS5xx config register */ #define YAS5XX_CONFIG_INTON BIT(0) /* Interrupt on? */ #define YAS5XX_CONFIG_INTHACT BIT(1) /* Interrupt active high? */ @@ -65,6 +89,7 @@ #define YAS5XX_MEASURE_LDTC BIT(1) #define YAS5XX_MEASURE_FORS BIT(2) #define YAS5XX_MEASURE_DLYMES BIT(4) +#define YAS5XX_MEASURE_CONT BIT(5) /* Bits in the measure data register */ #define YAS5XX_MEASURE_DATA_BUSY BIT(7) @@ -88,33 +113,101 @@ #define YAS532_DATA_BITS 13 #define YAS532_DATA_CENTER BIT(YAS532_DATA_BITS - 1) #define YAS532_DATA_OVERFLOW (BIT(YAS532_DATA_BITS) - 1) -#define YAS532_20DEGREES 390 /* Looks like Kelvin */ -/* These variant IDs are known from code dumps */ #define YAS537_DEVICE_ID 0x07 /* YAS537 (MS-3T) */ -#define YAS539_DEVICE_ID 0x08 /* YAS539 (MS-3S) */ +#define YAS537_VERSION_0 0 /* Version naming unknown */ +#define YAS537_VERSION_1 1 /* Version naming unknown */ +#define YAS537_MAG_AVERAGE_32_MASK GENMASK(6, 4) +#define YAS537_MEASURE_TIME_WORST_US 1500 +#define YAS537_DEFAULT_SENSOR_DELAY_MS 50 +#define YAS537_MAG_RCOIL_TIME_US 65 +#define YAS537_MTC3_MASK_PREP GENMASK(7, 0) +#define YAS537_MTC3_MASK_GET GENMASK(7, 5) +#define YAS537_MTC3_ADD_BIT BIT(4) +#define YAS537_HCK_MASK_PREP GENMASK(4, 0) +#define YAS537_HCK_MASK_GET GENMASK(7, 4) +#define YAS537_LCK_MASK_PREP GENMASK(4, 0) +#define YAS537_LCK_MASK_GET GENMASK(3, 0) +#define YAS537_OC_MASK_GET GENMASK(5, 0) /* Turn off device regulators etc after 5 seconds of inactivity */ #define YAS5XX_AUTOSUSPEND_DELAY_MS 5000 +enum chip_ids { + yas530, + yas532, + yas533, + yas537, +}; + +static const int yas530_volatile_reg[] = { + YAS530_ACTUATE_INIT_COIL, + YAS530_MEASURE, +}; + +static const int yas537_volatile_reg[] = { + YAS537_MEASURE, +}; + struct yas5xx_calibration { /* Linearization calibration x, y1, y2 */ s32 r[3]; u32 f[3]; /* Temperature compensation calibration */ - s32 Cx, Cy1, Cy2; + s16 Cx, Cy1, Cy2; /* Misc calibration coefficients */ - s32 a2, a3, a4, a5, a6, a7, a8, a9, k; + s8 a2, a3, a4, a6, a7, a8; + s16 a5, a9; + u8 k; /* clock divider */ u8 dck; }; +struct yas5xx; + +/** + * struct yas5xx_chip_info - device-specific data and function pointers + * @devid: device ID number + * @product_name: product name of the YAS variant + * @version_names: version letters or namings + * @volatile_reg: device-specific volatile registers + * @volatile_reg_qty: quantity of device-specific volatile registers + * @scaling_val2: scaling value for IIO_CHAN_INFO_SCALE + * @t_ref: number of counts at reference temperature 20 °C + * @min_temp_x10: starting point of temperature counting in 1/10:s degrees Celsius + * @get_measure: function pointer to get a measurement + * @get_calibration_data: function pointer to get calibration data + * @dump_calibration: function pointer to dump calibration for debugging + * @measure_offsets: function pointer to measure the offsets + * @power_on: function pointer to power-on procedure + * + * The "t_ref" value for YAS532/533 is known from the Android driver. + * For YAS530 and YAS537 it was approximately measured. + * + * The temperatures "min_temp_x10" are derived from the temperature resolutions + * given in the data sheets. + */ +struct yas5xx_chip_info { + unsigned int devid; + const char *product_name; + const char *version_names[2]; + const int *volatile_reg; + int volatile_reg_qty; + u32 scaling_val2; + u16 t_ref; + s16 min_temp_x10; + int (*get_measure)(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo); + int (*get_calibration_data)(struct yas5xx *yas5xx); + void (*dump_calibration)(struct yas5xx *yas5xx); + int (*measure_offsets)(struct yas5xx *yas5xx); + int (*power_on)(struct yas5xx *yas5xx); +}; + /** * struct yas5xx - state container for the YAS5xx driver * @dev: parent device pointer - * @devid: device ID number + * @chip_info: device-specific data and function pointers * @version: device version - * @name: device name * @calibration: calibration settings from the OTP storage * @hard_offsets: offsets for each axis measured with initcoil actuated * @orientation: mounting matrix, flipped axis etc @@ -128,11 +221,10 @@ struct yas5xx_calibration { */ struct yas5xx { struct device *dev; - unsigned int devid; + const struct yas5xx_chip_info *chip_info; unsigned int version; - char name[16]; struct yas5xx_calibration calibration; - u8 hard_offsets[3]; + s8 hard_offsets[3]; struct iio_mount_matrix orientation; struct regmap *map; struct regulator_bulk_data regs[2]; @@ -179,23 +271,26 @@ static u16 yas532_extract_axis(u8 *data) } /** - * yas5xx_measure() - Make a measure from the hardware + * yas530_measure() - Make a measure from the hardware * @yas5xx: The device state * @t: the raw temperature measurement * @x: the raw x axis measurement * @y1: the y1 axis measurement * @y2: the y2 axis measurement * @return: 0 on success or error code + * + * Used by YAS530, YAS532 and YAS533. */ -static int yas5xx_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2) +static int yas530_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2) { + const struct yas5xx_chip_info *ci = yas5xx->chip_info; unsigned int busy; u8 data[8]; int ret; u16 val; mutex_lock(&yas5xx->lock); - ret = regmap_write(yas5xx->map, YAS5XX_MEASURE, YAS5XX_MEASURE_START); + ret = regmap_write(yas5xx->map, YAS530_MEASURE, YAS5XX_MEASURE_START); if (ret < 0) goto out_unlock; @@ -219,7 +314,7 @@ static int yas5xx_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y mutex_unlock(&yas5xx->lock); - switch (yas5xx->devid) { + switch (ci->devid) { case YAS530_DEVICE_ID: /* * The t value is 9 bits in big endian format @@ -261,8 +356,81 @@ out_unlock: return ret; } -static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis) +/** + * yas537_measure() - Make a measure from the hardware + * @yas5xx: The device state + * @t: the raw temperature measurement + * @x: the raw x axis measurement + * @y1: the y1 axis measurement + * @y2: the y2 axis measurement + * @return: 0 on success or error code + */ +static int yas537_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2) { + struct yas5xx_calibration *c = &yas5xx->calibration; + unsigned int busy; + u8 data[8]; + u16 xy1y2[3]; + s32 h[3], s[3]; + int i, ret; + + mutex_lock(&yas5xx->lock); + + /* Contrary to YAS530/532, also a "cont" bit is set, meaning unknown */ + ret = regmap_write(yas5xx->map, YAS537_MEASURE, YAS5XX_MEASURE_START | + YAS5XX_MEASURE_CONT); + if (ret < 0) + goto out_unlock; + + /* Use same timeout like YAS530/532 but the bit is in data row 2 */ + ret = regmap_read_poll_timeout(yas5xx->map, YAS5XX_MEASURE_DATA + 2, busy, + !(busy & YAS5XX_MEASURE_DATA_BUSY), + 500, 20000); + if (ret) { + dev_err(yas5xx->dev, "timeout waiting for measurement\n"); + goto out_unlock; + } + + ret = regmap_bulk_read(yas5xx->map, YAS5XX_MEASURE_DATA, + data, sizeof(data)); + if (ret) + goto out_unlock; + + mutex_unlock(&yas5xx->lock); + + *t = get_unaligned_be16(&data[0]); + xy1y2[0] = FIELD_GET(GENMASK(13, 0), get_unaligned_be16(&data[2])); + xy1y2[1] = get_unaligned_be16(&data[4]); + xy1y2[2] = get_unaligned_be16(&data[6]); + + /* The second version of YAS537 needs to include calibration coefficients */ + if (yas5xx->version == YAS537_VERSION_1) { + for (i = 0; i < 3; i++) + s[i] = xy1y2[i] - BIT(13); + h[0] = (c->k * (128 * s[0] + c->a2 * s[1] + c->a3 * s[2])) / BIT(13); + h[1] = (c->k * (c->a4 * s[0] + c->a5 * s[1] + c->a6 * s[2])) / BIT(13); + h[2] = (c->k * (c->a7 * s[0] + c->a8 * s[1] + c->a9 * s[2])) / BIT(13); + for (i = 0; i < 3; i++) { + clamp_val(h[i], -BIT(13), BIT(13) - 1); + xy1y2[i] = h[i] + BIT(13); + } + } + + *x = xy1y2[0]; + *y1 = xy1y2[1]; + *y2 = xy1y2[2]; + + return 0; + +out_unlock: + mutex_unlock(&yas5xx->lock); + return ret; +} + +/* Used by YAS530, YAS532 and YAS533 */ +static s32 yas530_linearize(struct yas5xx *yas5xx, u16 val, int axis) +{ + const struct yas5xx_chip_info *ci = yas5xx->chip_info; struct yas5xx_calibration *c = &yas5xx->calibration; static const s32 yas532ac_coef[] = { YAS532_VERSION_AC_COEF_X, @@ -272,7 +440,7 @@ static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis) s32 coef; /* Select coefficients */ - switch (yas5xx->devid) { + switch (ci->devid) { case YAS530_DEVICE_ID: if (yas5xx->version == YAS530_VERSION_A) coef = YAS530_VERSION_A_COEF; @@ -302,8 +470,24 @@ static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis) (yas5xx->hard_offsets[axis] - c->r[axis]) * coef; } +static s32 yas5xx_calc_temperature(struct yas5xx *yas5xx, u16 t) +{ + const struct yas5xx_chip_info *ci = yas5xx->chip_info; + s32 to; + u16 t_ref; + s16 min_temp_x10; + int ref_temp_x10; + + t_ref = ci->t_ref; + min_temp_x10 = ci->min_temp_x10; + ref_temp_x10 = 200; + + to = (min_temp_x10 + ((ref_temp_x10 - min_temp_x10) * t / t_ref)) * 100; + return to; +} + /** - * yas5xx_get_measure() - Measure a sample of all axis and process + * yas530_get_measure() - Measure a sample of all axis and process * @yas5xx: The device state * @to: Temperature out * @xo: X axis out @@ -311,36 +495,50 @@ static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis) * @zo: Z axis out * @return: 0 on success or error code * - * Returned values are in nanotesla according to some code. + * Used by YAS530, YAS532 and YAS533. */ -static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo) +static int yas530_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo) { + const struct yas5xx_chip_info *ci = yas5xx->chip_info; struct yas5xx_calibration *c = &yas5xx->calibration; - u16 t, x, y1, y2; - /* These are "signed x, signed y1 etc */ + u16 t_ref, t_comp, t, x, y1, y2; + /* These are signed x, signed y1 etc */ s32 sx, sy1, sy2, sy, sz; int ret; /* We first get raw data that needs to be translated to [x,y,z] */ - ret = yas5xx_measure(yas5xx, &t, &x, &y1, &y2); + ret = yas530_measure(yas5xx, &t, &x, &y1, &y2); if (ret) return ret; /* Do some linearization if available */ - sx = yas5xx_linearize(yas5xx, x, 0); - sy1 = yas5xx_linearize(yas5xx, y1, 1); - sy2 = yas5xx_linearize(yas5xx, y2, 2); + sx = yas530_linearize(yas5xx, x, 0); + sy1 = yas530_linearize(yas5xx, y1, 1); + sy2 = yas530_linearize(yas5xx, y2, 2); + + /* + * Set the temperature for compensation (unit: counts): + * YAS532/YAS533 version AC uses the temperature deviation as a + * multiplier. YAS530 and YAS532 version AB use solely the t value. + */ + t_ref = ci->t_ref; + if (ci->devid == YAS532_DEVICE_ID && + yas5xx->version == YAS532_VERSION_AC) { + t_comp = t - t_ref; + } else { + t_comp = t; + } /* * Temperature compensation for x, y1, y2 respectively: * - * Cx * t - * x' = x - ------ - * 100 + * Cx * t_comp + * x' = x - ----------- + * 100 */ - sx = sx - (c->Cx * t) / 100; - sy1 = sy1 - (c->Cy1 * t) / 100; - sy2 = sy2 - (c->Cy2 * t) / 100; + sx = sx - (c->Cx * t_comp) / 100; + sy1 = sy1 - (c->Cy1 * t_comp) / 100; + sy2 = sy2 - (c->Cy2 * t_comp) / 100; /* * Break y1 and y2 into y and z, y1 and y2 are apparently encoding @@ -349,11 +547,9 @@ static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, sy = sy1 - sy2; sz = -sy1 - sy2; - /* - * FIXME: convert to Celsius? Just guessing this is given - * as 1/10:s of degrees so multiply by 100 to get millicentigrades. - */ - *to = t * 100; + /* Calculate temperature readout */ + *to = yas5xx_calc_temperature(yas5xx, t); + /* * Calibrate [x,y,z] with some formulas like this: * @@ -376,19 +572,56 @@ static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, return 0; } +/** + * yas537_get_measure() - Measure a sample of all axis and process + * @yas5xx: The device state + * @to: Temperature out + * @xo: X axis out + * @yo: Y axis out + * @zo: Z axis out + * @return: 0 on success or error code + */ +static int yas537_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo) +{ + u16 t, x, y1, y2; + int ret; + + /* We first get raw data that needs to be translated to [x,y,z] */ + ret = yas537_measure(yas5xx, &t, &x, &y1, &y2); + if (ret) + return ret; + + /* Calculate temperature readout */ + *to = yas5xx_calc_temperature(yas5xx, t); + + /* + * Unfortunately, no linearization or temperature compensation formulas + * are known for YAS537. + */ + + /* Calculate x, y, z from x, y1, y2 */ + *xo = (x - BIT(13)) * 300; + *yo = (y1 - y2) * 1732 / 10; + *zo = (-y1 - y2 + BIT(14)) * 300; + + return 0; +} + static int yas5xx_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct yas5xx *yas5xx = iio_priv(indio_dev); + const struct yas5xx_chip_info *ci = yas5xx->chip_info; s32 t, x, y, z; int ret; switch (mask) { + case IIO_CHAN_INFO_PROCESSED: case IIO_CHAN_INFO_RAW: pm_runtime_get_sync(yas5xx->dev); - ret = yas5xx_get_measure(yas5xx, &t, &x, &y, &z); + ret = ci->get_measure(yas5xx, &t, &x, &y, &z); pm_runtime_mark_last_busy(yas5xx->dev); pm_runtime_put_autosuspend(yas5xx->dev); if (ret) @@ -412,19 +645,8 @@ static int yas5xx_read_raw(struct iio_dev *indio_dev, } return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: - if (chan->address == 0) { - /* Temperature is unscaled */ - *val = 1; - return IIO_VAL_INT; - } - /* - * The axis values are in nanotesla according to the vendor - * drivers, but is clearly in microtesla according to - * experiments. Since 1 uT = 0.01 Gauss, we need to divide - * by 100000000 (10^8) to get to Gauss from the raw value. - */ *val = 1; - *val2 = 100000000; + *val2 = ci->scaling_val2; return IIO_VAL_FRACTIONAL; default: /* Unknown request */ @@ -435,11 +657,12 @@ static int yas5xx_read_raw(struct iio_dev *indio_dev, static void yas5xx_fill_buffer(struct iio_dev *indio_dev) { struct yas5xx *yas5xx = iio_priv(indio_dev); + const struct yas5xx_chip_info *ci = yas5xx->chip_info; s32 t, x, y, z; int ret; pm_runtime_get_sync(yas5xx->dev); - ret = yas5xx_get_measure(yas5xx, &t, &x, &y, &z); + ret = ci->get_measure(yas5xx, &t, &x, &y, &z); pm_runtime_mark_last_busy(yas5xx->dev); pm_runtime_put_autosuspend(yas5xx->dev); if (ret) { @@ -505,7 +728,7 @@ static const struct iio_chan_spec yas5xx_channels[] = { .address = 0, .scan_index = 0, .scan_type = { - .sign = 'u', + .sign = 's', .realbits = 32, .storagebits = 32, .endianness = IIO_CPU, @@ -525,9 +748,26 @@ static const struct iio_info yas5xx_info = { static bool yas5xx_volatile_reg(struct device *dev, unsigned int reg) { - return reg == YAS5XX_ACTUATE_INIT_COIL || - reg == YAS5XX_MEASURE || - (reg >= YAS5XX_MEASURE_DATA && reg <= YAS5XX_MEASURE_DATA + 8); + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct yas5xx *yas5xx = iio_priv(indio_dev); + const struct yas5xx_chip_info *ci = yas5xx->chip_info; + int reg_qty; + int i; + + if (reg >= YAS5XX_MEASURE_DATA && reg < YAS5XX_MEASURE_DATA + 8) + return true; + + /* + * YAS versions share different registers on the same address, + * need to differentiate. + */ + reg_qty = ci->volatile_reg_qty; + for (i = 0; i < reg_qty; i++) { + if (reg == ci->volatile_reg[i]) + return true; + } + + return false; } /* TODO: enable regmap cache, using mark dirty and sync at runtime resume */ @@ -539,11 +779,13 @@ static const struct regmap_config yas5xx_regmap_config = { }; /** - * yas53x_extract_calibration() - extracts the a2-a9 and k calibration + * yas530_extract_calibration() - extracts the a2-a9 and k calibration * @data: the bitfield to use * @c: the calibration to populate + * + * Used by YAS530, YAS532 and YAS533. */ -static void yas53x_extract_calibration(u8 *data, struct yas5xx_calibration *c) +static void yas530_extract_calibration(u8 *data, struct yas5xx_calibration *c) { u64 val = get_unaligned_be64(data); @@ -581,24 +823,27 @@ static int yas530_get_calibration_data(struct yas5xx *yas5xx) int ret; /* Dummy read, first read is ALWAYS wrong */ - ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data)); + ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data)); if (ret) return ret; /* Actual calibration readout */ - ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data)); + ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data)); if (ret) return ret; - dev_dbg(yas5xx->dev, "calibration data: %*ph\n", 14, data); + dev_dbg(yas5xx->dev, "calibration data: %16ph\n", data); + /* Contribute calibration data to the input pool for kernel entropy */ add_device_randomness(data, sizeof(data)); + + /* Extract version */ yas5xx->version = data[15] & GENMASK(1, 0); /* Extract the calibration from the bitfield */ c->Cx = data[0] * 6 - 768; c->Cy1 = data[1] * 6 - 768; c->Cy2 = data[2] * 6 - 768; - yas53x_extract_calibration(&data[3], c); + yas530_extract_calibration(&data[3], c); /* * Extract linearization: @@ -618,6 +863,7 @@ static int yas530_get_calibration_data(struct yas5xx *yas5xx) c->r[0] = sign_extend32(FIELD_GET(GENMASK(28, 23), val), 5); c->r[1] = sign_extend32(FIELD_GET(GENMASK(20, 15), val), 5); c->r[2] = sign_extend32(FIELD_GET(GENMASK(12, 7), val), 5); + return 0; } @@ -629,22 +875,22 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx) int ret; /* Dummy read, first read is ALWAYS wrong */ - ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data)); + ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data)); if (ret) return ret; /* Actual calibration readout */ - ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data)); + ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data)); if (ret) return ret; - dev_dbg(yas5xx->dev, "calibration data: %*ph\n", 14, data); + dev_dbg(yas5xx->dev, "calibration data: %14ph\n", data); /* Sanity check, is this all zeroes? */ - if (memchr_inv(data, 0x00, 13) == NULL) { - if (!(data[13] & BIT(7))) - dev_warn(yas5xx->dev, "calibration is blank!\n"); - } + if (!memchr_inv(data, 0x00, 13) && !(data[13] & BIT(7))) + dev_warn(yas5xx->dev, "calibration is blank!\n"); + /* Contribute calibration data to the input pool for kernel entropy */ add_device_randomness(data, sizeof(data)); + /* Only one bit of version info reserved here as far as we know */ yas5xx->version = data[13] & BIT(0); @@ -652,7 +898,8 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx) c->Cx = data[0] * 10 - 1280; c->Cy1 = data[1] * 10 - 1280; c->Cy2 = data[2] * 10 - 1280; - yas53x_extract_calibration(&data[3], c); + yas530_extract_calibration(&data[3], c); + /* * Extract linearization: * Linearization layout in the 32 bits at byte 10: @@ -675,7 +922,204 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx) return 0; } -static void yas5xx_dump_calibration(struct yas5xx *yas5xx) +static int yas537_get_calibration_data(struct yas5xx *yas5xx) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + u8 data[17]; + u32 val1, val2, val3, val4; + int i, ret; + + /* Writing SRST register */ + ret = regmap_write(yas5xx->map, YAS537_SRST, BIT(1)); + if (ret) + return ret; + + /* Calibration readout, YAS537 needs one readout only */ + ret = regmap_bulk_read(yas5xx->map, YAS537_CAL, data, sizeof(data)); + if (ret) + return ret; + dev_dbg(yas5xx->dev, "calibration data: %17ph\n", data); + + /* Sanity check, is this all zeroes? */ + if (!memchr_inv(data, 0x00, 16) && !FIELD_GET(GENMASK(5, 0), data[16])) + dev_warn(yas5xx->dev, "calibration is blank!\n"); + + /* Contribute calibration data to the input pool for kernel entropy */ + add_device_randomness(data, sizeof(data)); + + /* Extract version information */ + yas5xx->version = FIELD_GET(GENMASK(7, 6), data[16]); + + /* There are two versions of YAS537 behaving differently */ + switch (yas5xx->version) { + case YAS537_VERSION_0: + /* + * The first version simply writes data back into registers: + * + * data[0] YAS537_MTC 0x93 + * data[1] 0x94 + * data[2] 0x95 + * data[3] 0x96 + * data[4] 0x97 + * data[5] 0x98 + * data[6] 0x99 + * data[7] 0x9a + * data[8] 0x9b + * data[9] 0x9c + * data[10] 0x9d + * data[11] YAS537_OC 0x9e + * + * data[12] YAS537_OFFSET_X 0x84 + * data[13] YAS537_OFFSET_Y1 0x85 + * data[14] YAS537_OFFSET_Y2 0x86 + * + * data[15] YAS537_HCK 0x88 + * data[16] YAS537_LCK 0x89 + */ + for (i = 0; i < 12; i++) { + ret = regmap_write(yas5xx->map, YAS537_MTC + i, + data[i]); + if (ret) + return ret; + } + for (i = 0; i < 3; i++) { + ret = regmap_write(yas5xx->map, YAS537_OFFSET_X + i, + data[i + 12]); + if (ret) + return ret; + yas5xx->hard_offsets[i] = data[i + 12]; + } + for (i = 0; i < 2; i++) { + ret = regmap_write(yas5xx->map, YAS537_HCK + i, + data[i + 15]); + if (ret) + return ret; + } + break; + case YAS537_VERSION_1: + /* + * The second version writes some data into registers but also + * extracts calibration coefficients. + * + * Registers being written: + * + * data[0] YAS537_MTC 0x93 + * data[1] YAS537_MTC+1 0x94 + * data[2] YAS537_MTC+2 0x95 + * data[3] YAS537_MTC+3 (partially) 0x96 + * + * data[12] YAS537_OFFSET_X 0x84 + * data[13] YAS537_OFFSET_Y1 0x85 + * data[14] YAS537_OFFSET_Y2 0x86 + * + * data[15] YAS537_HCK (partially) 0x88 + * YAS537_LCK (partially) 0x89 + * data[16] YAS537_OC (partially) 0x9e + */ + for (i = 0; i < 3; i++) { + ret = regmap_write(yas5xx->map, YAS537_MTC + i, + data[i]); + if (ret) + return ret; + } + for (i = 0; i < 3; i++) { + ret = regmap_write(yas5xx->map, YAS537_OFFSET_X + i, + data[i + 12]); + if (ret) + return ret; + yas5xx->hard_offsets[i] = data[i + 12]; + } + /* + * Visualization of partially taken data: + * + * data[3] n 7 6 5 4 3 2 1 0 + * YAS537_MTC+3 x x x 1 0 0 0 0 + * + * data[15] n 7 6 5 4 3 2 1 0 + * YAS537_HCK x x x x 0 + * + * data[15] n 7 6 5 4 3 2 1 0 + * YAS537_LCK x x x x 0 + * + * data[16] n 7 6 5 4 3 2 1 0 + * YAS537_OC x x x x x x + */ + ret = regmap_write(yas5xx->map, YAS537_MTC + 3, + FIELD_PREP(YAS537_MTC3_MASK_PREP, + FIELD_GET(YAS537_MTC3_MASK_GET, data[3])) | + YAS537_MTC3_ADD_BIT); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS537_HCK, + FIELD_PREP(YAS537_HCK_MASK_PREP, + FIELD_GET(YAS537_HCK_MASK_GET, data[15]))); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS537_LCK, + FIELD_PREP(YAS537_LCK_MASK_PREP, + FIELD_GET(YAS537_LCK_MASK_GET, data[15]))); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS537_OC, + FIELD_GET(YAS537_OC_MASK_GET, data[16])); + if (ret) + return ret; + /* + * For data extraction, build some blocks. Four 32-bit blocks + * look appropriate. + * + * n 7 6 5 4 3 2 1 0 + * data[0] 0 [ Cx Cx Cx Cx Cx Cx Cx Cx ] bits 31 .. 24 + * data[1] 1 [ Cx C1 C1 C1 C1 C1 C1 C1 ] bits 23 .. 16 + * data[2] 2 [ C1 C1 C2 C2 C2 C2 C2 C2 ] bits 15 .. 8 + * data[3] 3 [ C2 C2 C2 ] bits 7 .. 0 + * + * n 7 6 5 4 3 2 1 0 + * data[3] 0 [ a2 a2 a2 a2 a2 ] bits 31 .. 24 + * data[4] 1 [ a2 a2 a3 a3 a3 a3 a3 a3 ] bits 23 .. 16 + * data[5] 2 [ a3 a4 a4 a4 a4 a4 a4 a4 ] bits 15 .. 8 + * data[6] 3 [ a4 ] bits 7 .. 0 + * + * n 7 6 5 4 3 2 1 0 + * data[6] 0 [ a5 a5 a5 a5 a5 a5 a5 ] bits 31 .. 24 + * data[7] 1 [ a5 a5 a6 a6 a6 a6 a6 a6 ] bits 23 .. 16 + * data[8] 2 [ a6 a7 a7 a7 a7 a7 a7 a7 ] bits 15 .. 8 + * data[9] 3 [ a7 ] bits 7 .. 0 + * + * n 7 6 5 4 3 2 1 0 + * data[9] 0 [ a8 a8 a8 a8 a8 a8 a8 ] bits 31 .. 24 + * data[10] 1 [ a9 a9 a9 a9 a9 a9 a9 a9 ] bits 23 .. 16 + * data[11] 2 [ a9 k k k k k k k ] bits 15 .. 8 + * data[12] 3 [ ] bits 7 .. 0 + */ + val1 = get_unaligned_be32(&data[0]); + val2 = get_unaligned_be32(&data[3]); + val3 = get_unaligned_be32(&data[6]); + val4 = get_unaligned_be32(&data[9]); + /* Extract calibration coefficients and modify */ + c->Cx = FIELD_GET(GENMASK(31, 23), val1) - 256; + c->Cy1 = FIELD_GET(GENMASK(22, 14), val1) - 256; + c->Cy2 = FIELD_GET(GENMASK(13, 5), val1) - 256; + c->a2 = FIELD_GET(GENMASK(28, 22), val2) - 64; + c->a3 = FIELD_GET(GENMASK(21, 15), val2) - 64; + c->a4 = FIELD_GET(GENMASK(14, 7), val2) - 128; + c->a5 = FIELD_GET(GENMASK(30, 22), val3) - 112; + c->a6 = FIELD_GET(GENMASK(21, 15), val3) - 64; + c->a7 = FIELD_GET(GENMASK(14, 7), val3) - 128; + c->a8 = FIELD_GET(GENMASK(30, 24), val4) - 64; + c->a9 = FIELD_GET(GENMASK(23, 15), val4) - 112; + c->k = FIELD_GET(GENMASK(14, 8), val4); + break; + default: + dev_err(yas5xx->dev, "unknown version of YAS537\n"); + return -EINVAL; + } + + return 0; +} + +/* Used by YAS530, YAS532 and YAS533 */ +static void yas530_dump_calibration(struct yas5xx *yas5xx) { struct yas5xx_calibration *c = &yas5xx->calibration; @@ -698,20 +1142,42 @@ static void yas5xx_dump_calibration(struct yas5xx *yas5xx) dev_dbg(yas5xx->dev, "dck = %d\n", c->dck); } -static int yas5xx_set_offsets(struct yas5xx *yas5xx, s8 ox, s8 oy1, s8 oy2) +static void yas537_dump_calibration(struct yas5xx *yas5xx) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + + if (yas5xx->version == YAS537_VERSION_1) { + dev_dbg(yas5xx->dev, "Cx = %d\n", c->Cx); + dev_dbg(yas5xx->dev, "Cy1 = %d\n", c->Cy1); + dev_dbg(yas5xx->dev, "Cy2 = %d\n", c->Cy2); + dev_dbg(yas5xx->dev, "a2 = %d\n", c->a2); + dev_dbg(yas5xx->dev, "a3 = %d\n", c->a3); + dev_dbg(yas5xx->dev, "a4 = %d\n", c->a4); + dev_dbg(yas5xx->dev, "a5 = %d\n", c->a5); + dev_dbg(yas5xx->dev, "a6 = %d\n", c->a6); + dev_dbg(yas5xx->dev, "a7 = %d\n", c->a7); + dev_dbg(yas5xx->dev, "a8 = %d\n", c->a8); + dev_dbg(yas5xx->dev, "a9 = %d\n", c->a9); + dev_dbg(yas5xx->dev, "k = %d\n", c->k); + } +} + +/* Used by YAS530, YAS532 and YAS533 */ +static int yas530_set_offsets(struct yas5xx *yas5xx, s8 ox, s8 oy1, s8 oy2) { int ret; - ret = regmap_write(yas5xx->map, YAS5XX_OFFSET_X, ox); + ret = regmap_write(yas5xx->map, YAS530_OFFSET_X, ox); if (ret) return ret; - ret = regmap_write(yas5xx->map, YAS5XX_OFFSET_Y1, oy1); + ret = regmap_write(yas5xx->map, YAS530_OFFSET_Y1, oy1); if (ret) return ret; - return regmap_write(yas5xx->map, YAS5XX_OFFSET_Y2, oy2); + return regmap_write(yas5xx->map, YAS530_OFFSET_Y2, oy2); } -static s8 yas5xx_adjust_offset(s8 old, int bit, u16 center, u16 measure) +/* Used by YAS530, YAS532 and YAS533 */ +static s8 yas530_adjust_offset(s8 old, int bit, u16 center, u16 measure) { if (measure > center) return old + BIT(bit); @@ -720,8 +1186,10 @@ static s8 yas5xx_adjust_offset(s8 old, int bit, u16 center, u16 measure) return old; } -static int yas5xx_meaure_offsets(struct yas5xx *yas5xx) +/* Used by YAS530, YAS532 and YAS533 */ +static int yas530_measure_offsets(struct yas5xx *yas5xx) { + const struct yas5xx_chip_info *ci = yas5xx->chip_info; int ret; u16 center; u16 t, x, y1, y2; @@ -729,12 +1197,12 @@ static int yas5xx_meaure_offsets(struct yas5xx *yas5xx) int i; /* Actuate the init coil and measure offsets */ - ret = regmap_write(yas5xx->map, YAS5XX_ACTUATE_INIT_COIL, 0); + ret = regmap_write(yas5xx->map, YAS530_ACTUATE_INIT_COIL, 0); if (ret) return ret; /* When the initcoil is active this should be around the center */ - switch (yas5xx->devid) { + switch (ci->devid) { case YAS530_DEVICE_ID: center = YAS530_DATA_CENTER; break; @@ -763,26 +1231,26 @@ static int yas5xx_meaure_offsets(struct yas5xx *yas5xx) oy2 = 0; for (i = 4; i >= 0; i--) { - ret = yas5xx_set_offsets(yas5xx, ox, oy1, oy2); + ret = yas530_set_offsets(yas5xx, ox, oy1, oy2); if (ret) return ret; - ret = yas5xx_measure(yas5xx, &t, &x, &y1, &y2); + ret = yas530_measure(yas5xx, &t, &x, &y1, &y2); if (ret) return ret; dev_dbg(yas5xx->dev, "measurement %d: x=%d, y1=%d, y2=%d\n", 5-i, x, y1, y2); - ox = yas5xx_adjust_offset(ox, i, center, x); - oy1 = yas5xx_adjust_offset(oy1, i, center, y1); - oy2 = yas5xx_adjust_offset(oy2, i, center, y2); + ox = yas530_adjust_offset(ox, i, center, x); + oy1 = yas530_adjust_offset(oy1, i, center, y1); + oy2 = yas530_adjust_offset(oy2, i, center, y2); } /* Needed for calibration algorithm */ yas5xx->hard_offsets[0] = ox; yas5xx->hard_offsets[1] = oy1; yas5xx->hard_offsets[2] = oy2; - ret = yas5xx_set_offsets(yas5xx, ox, oy1, oy2); + ret = yas530_set_offsets(yas5xx, ox, oy1, oy2); if (ret) return ret; @@ -791,35 +1259,139 @@ static int yas5xx_meaure_offsets(struct yas5xx *yas5xx) return 0; } -static int yas5xx_power_on(struct yas5xx *yas5xx) +/* Used by YAS530, YAS532 and YAS533 */ +static int yas530_power_on(struct yas5xx *yas5xx) { unsigned int val; int ret; /* Zero the test registers */ - ret = regmap_write(yas5xx->map, YAS5XX_TEST1, 0); + ret = regmap_write(yas5xx->map, YAS530_TEST1, 0); if (ret) return ret; - ret = regmap_write(yas5xx->map, YAS5XX_TEST2, 0); + ret = regmap_write(yas5xx->map, YAS530_TEST2, 0); if (ret) return ret; /* Set up for no interrupts, calibrated clock divider */ val = FIELD_PREP(YAS5XX_CONFIG_CCK_MASK, yas5xx->calibration.dck); - ret = regmap_write(yas5xx->map, YAS5XX_CONFIG, val); + ret = regmap_write(yas5xx->map, YAS530_CONFIG, val); if (ret) return ret; /* Measure interval 0 (back-to-back?) */ - return regmap_write(yas5xx->map, YAS5XX_MEASURE_INTERVAL, 0); + return regmap_write(yas5xx->map, YAS530_MEASURE_INTERVAL, 0); } +static int yas537_power_on(struct yas5xx *yas5xx) +{ + __be16 buf; + int ret; + u8 intrvl; + + /* Writing ADCCAL and TRM registers */ + buf = cpu_to_be16(GENMASK(9, 3)); + ret = regmap_bulk_write(yas5xx->map, YAS537_ADCCAL, &buf, sizeof(buf)); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS537_TRM, GENMASK(7, 0)); + if (ret) + return ret; + + /* The interval value is static in regular operation */ + intrvl = (YAS537_DEFAULT_SENSOR_DELAY_MS * MILLI + - YAS537_MEASURE_TIME_WORST_US) / 4100; + ret = regmap_write(yas5xx->map, YAS537_MEASURE_INTERVAL, intrvl); + if (ret) + return ret; + + /* The average value is also static in regular operation */ + ret = regmap_write(yas5xx->map, YAS537_AVR, YAS537_MAG_AVERAGE_32_MASK); + if (ret) + return ret; + + /* Perform the "rcoil" part but skip the "last_after_rcoil" read */ + ret = regmap_write(yas5xx->map, YAS537_CONFIG, BIT(3)); + if (ret) + return ret; + + /* Wait until the coil has ramped up */ + usleep_range(YAS537_MAG_RCOIL_TIME_US, YAS537_MAG_RCOIL_TIME_US + 100); + + return 0; +} + +static const struct yas5xx_chip_info yas5xx_chip_info_tbl[] = { + [yas530] = { + .devid = YAS530_DEVICE_ID, + .product_name = "YAS530 MS-3E", + .version_names = { "A", "B" }, + .volatile_reg = yas530_volatile_reg, + .volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg), + .scaling_val2 = 100000000, /* picotesla to Gauss */ + .t_ref = 182, /* counts */ + .min_temp_x10 = -620, /* 1/10:s degrees Celsius */ + .get_measure = yas530_get_measure, + .get_calibration_data = yas530_get_calibration_data, + .dump_calibration = yas530_dump_calibration, + .measure_offsets = yas530_measure_offsets, + .power_on = yas530_power_on, + }, + [yas532] = { + .devid = YAS532_DEVICE_ID, + .product_name = "YAS532 MS-3R", + .version_names = { "AB", "AC" }, + .volatile_reg = yas530_volatile_reg, + .volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg), + .scaling_val2 = 100000, /* nanotesla to Gauss */ + .t_ref = 390, /* counts */ + .min_temp_x10 = -500, /* 1/10:s degrees Celsius */ + .get_measure = yas530_get_measure, + .get_calibration_data = yas532_get_calibration_data, + .dump_calibration = yas530_dump_calibration, + .measure_offsets = yas530_measure_offsets, + .power_on = yas530_power_on, + }, + [yas533] = { + .devid = YAS532_DEVICE_ID, + .product_name = "YAS533 MS-3F", + .version_names = { "AB", "AC" }, + .volatile_reg = yas530_volatile_reg, + .volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg), + .scaling_val2 = 100000, /* nanotesla to Gauss */ + .t_ref = 390, /* counts */ + .min_temp_x10 = -500, /* 1/10:s degrees Celsius */ + .get_measure = yas530_get_measure, + .get_calibration_data = yas532_get_calibration_data, + .dump_calibration = yas530_dump_calibration, + .measure_offsets = yas530_measure_offsets, + .power_on = yas530_power_on, + }, + [yas537] = { + .devid = YAS537_DEVICE_ID, + .product_name = "YAS537 MS-3T", + .version_names = { "v0", "v1" }, /* version naming unknown */ + .volatile_reg = yas537_volatile_reg, + .volatile_reg_qty = ARRAY_SIZE(yas537_volatile_reg), + .scaling_val2 = 100000, /* nanotesla to Gauss */ + .t_ref = 8120, /* counts */ + .min_temp_x10 = -3860, /* 1/10:s degrees Celsius */ + .get_measure = yas537_get_measure, + .get_calibration_data = yas537_get_calibration_data, + .dump_calibration = yas537_dump_calibration, + /* .measure_offets is not needed for yas537 */ + .power_on = yas537_power_on, + }, +}; + static int yas5xx_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct iio_dev *indio_dev; struct device *dev = &i2c->dev; struct yas5xx *yas5xx; + const struct yas5xx_chip_info *ci; + int id_check; int ret; indio_dev = devm_iio_device_alloc(dev, sizeof(*yas5xx)); @@ -843,10 +1415,8 @@ static int yas5xx_probe(struct i2c_client *i2c, return dev_err_probe(dev, ret, "cannot get regulators\n"); ret = regulator_bulk_enable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); - if (ret) { - dev_err(dev, "cannot enable regulators\n"); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, "cannot enable regulators\n"); /* See comment in runtime resume callback */ usleep_range(31000, 40000); @@ -854,57 +1424,55 @@ static int yas5xx_probe(struct i2c_client *i2c, /* This will take the device out of reset if need be */ yas5xx->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(yas5xx->reset)) { - ret = dev_err_probe(dev, PTR_ERR(yas5xx->reset), - "failed to get reset line\n"); + ret = dev_err_probe(dev, PTR_ERR(yas5xx->reset), "failed to get reset line\n"); goto reg_off; } yas5xx->map = devm_regmap_init_i2c(i2c, &yas5xx_regmap_config); if (IS_ERR(yas5xx->map)) { - dev_err(dev, "failed to allocate register map\n"); - ret = PTR_ERR(yas5xx->map); + ret = dev_err_probe(dev, PTR_ERR(yas5xx->map), "failed to allocate register map\n"); goto assert_reset; } - ret = regmap_read(yas5xx->map, YAS5XX_DEVICE_ID, &yas5xx->devid); + ci = device_get_match_data(dev); + if (!ci) + ci = (const struct yas5xx_chip_info *)id->driver_data; + yas5xx->chip_info = ci; + + ret = regmap_read(yas5xx->map, YAS5XX_DEVICE_ID, &id_check); if (ret) goto assert_reset; - switch (yas5xx->devid) { - case YAS530_DEVICE_ID: - ret = yas530_get_calibration_data(yas5xx); - if (ret) - goto assert_reset; - dev_info(dev, "detected YAS530 MS-3E %s", - yas5xx->version ? "B" : "A"); - strncpy(yas5xx->name, "yas530", sizeof(yas5xx->name)); - break; - case YAS532_DEVICE_ID: - ret = yas532_get_calibration_data(yas5xx); - if (ret) - goto assert_reset; - dev_info(dev, "detected YAS532/YAS533 MS-3R/F %s", - yas5xx->version ? "AC" : "AB"); - strncpy(yas5xx->name, "yas532", sizeof(yas5xx->name)); - break; - default: - ret = -ENODEV; - dev_err(dev, "unhandled device ID %02x\n", yas5xx->devid); + if (id_check != ci->devid) { + ret = dev_err_probe(dev, -ENODEV, + "device ID %02x doesn't match %s\n", + id_check, id->name); goto assert_reset; } - yas5xx_dump_calibration(yas5xx); - ret = yas5xx_power_on(yas5xx); + ret = ci->get_calibration_data(yas5xx); if (ret) goto assert_reset; - ret = yas5xx_meaure_offsets(yas5xx); + + dev_info(dev, "detected %s %s\n", ci->product_name, + ci->version_names[yas5xx->version]); + + ci->dump_calibration(yas5xx); + + ret = ci->power_on(yas5xx); if (ret) goto assert_reset; + if (ci->measure_offsets) { + ret = ci->measure_offsets(yas5xx); + if (ret) + goto assert_reset; + } + indio_dev->info = &yas5xx_info; indio_dev->available_scan_masks = yas5xx_scan_masks; indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->name = yas5xx->name; + indio_dev->name = id->name; indio_dev->channels = yas5xx_channels; indio_dev->num_channels = ARRAY_SIZE(yas5xx_channels); @@ -912,13 +1480,13 @@ static int yas5xx_probe(struct i2c_client *i2c, yas5xx_handle_trigger, NULL); if (ret) { - dev_err(dev, "triggered buffer setup failed\n"); + dev_err_probe(dev, ret, "triggered buffer setup failed\n"); goto assert_reset; } ret = iio_device_register(indio_dev); if (ret) { - dev_err(dev, "device register failed\n"); + dev_err_probe(dev, ret, "device register failed\n"); goto cleanup_buffer; } @@ -980,6 +1548,7 @@ static int yas5xx_runtime_resume(struct device *dev) { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct yas5xx *yas5xx = iio_priv(indio_dev); + const struct yas5xx_chip_info *ci = yas5xx->chip_info; int ret; ret = regulator_bulk_enable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); @@ -996,7 +1565,7 @@ static int yas5xx_runtime_resume(struct device *dev) usleep_range(31000, 40000); gpiod_set_value_cansleep(yas5xx->reset, 0); - ret = yas5xx_power_on(yas5xx); + ret = ci->power_on(yas5xx); if (ret) { dev_err(dev, "cannot power on\n"); goto out_reset; @@ -1015,17 +1584,19 @@ static DEFINE_RUNTIME_DEV_PM_OPS(yas5xx_dev_pm_ops, yas5xx_runtime_suspend, yas5xx_runtime_resume, NULL); static const struct i2c_device_id yas5xx_id[] = { - {"yas530", }, - {"yas532", }, - {"yas533", }, + {"yas530", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas530] }, + {"yas532", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas532] }, + {"yas533", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas533] }, + {"yas537", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas537] }, {} }; MODULE_DEVICE_TABLE(i2c, yas5xx_id); static const struct of_device_id yas5xx_of_match[] = { - { .compatible = "yamaha,yas530", }, - { .compatible = "yamaha,yas532", }, - { .compatible = "yamaha,yas533", }, + { .compatible = "yamaha,yas530", &yas5xx_chip_info_tbl[yas530] }, + { .compatible = "yamaha,yas532", &yas5xx_chip_info_tbl[yas532] }, + { .compatible = "yamaha,yas533", &yas5xx_chip_info_tbl[yas533] }, + { .compatible = "yamaha,yas537", &yas5xx_chip_info_tbl[yas537] }, {} }; MODULE_DEVICE_TABLE(of, yas5xx_of_match); diff --git a/drivers/iio/pressure/dlhl60d.c b/drivers/iio/pressure/dlhl60d.c index 5f6bb3603a8b..f0b0d198c6d4 100644 --- a/drivers/iio/pressure/dlhl60d.c +++ b/drivers/iio/pressure/dlhl60d.c @@ -129,9 +129,8 @@ static int dlh_read_direct(struct dlh_state *st, if (ret) return ret; - *pressure = get_unaligned_be32(&st->rx_buf[1]) >> 8; - *temperature = get_unaligned_be32(&st->rx_buf[3]) & - GENMASK(DLH_NUM_TEMP_BITS - 1, 0); + *pressure = get_unaligned_be24(&st->rx_buf[1]); + *temperature = get_unaligned_be24(&st->rx_buf[4]); return 0; } diff --git a/drivers/iio/pressure/icp10100.c b/drivers/iio/pressure/icp10100.c index af4621eaa6b5..b62f28585db5 100644 --- a/drivers/iio/pressure/icp10100.c +++ b/drivers/iio/pressure/icp10100.c @@ -595,7 +595,7 @@ static int icp10100_probe(struct i2c_client *client, return devm_iio_device_register(&client->dev, indio_dev); } -static int __maybe_unused icp10100_suspend(struct device *dev) +static int icp10100_suspend(struct device *dev) { struct icp10100_state *st = iio_priv(dev_get_drvdata(dev)); int ret; @@ -607,7 +607,7 @@ static int __maybe_unused icp10100_suspend(struct device *dev) return ret; } -static int __maybe_unused icp10100_resume(struct device *dev) +static int icp10100_resume(struct device *dev) { struct icp10100_state *st = iio_priv(dev_get_drvdata(dev)); int ret; @@ -626,8 +626,8 @@ out_unlock: return ret; } -static UNIVERSAL_DEV_PM_OPS(icp10100_pm, icp10100_suspend, icp10100_resume, - NULL); +static DEFINE_RUNTIME_DEV_PM_OPS(icp10100_pm, icp10100_suspend, icp10100_resume, + NULL); static const struct of_device_id icp10100_of_match[] = { { @@ -646,7 +646,7 @@ MODULE_DEVICE_TABLE(i2c, icp10100_id); static struct i2c_driver icp10100_driver = { .driver = { .name = "icp10100", - .pm = &icp10100_pm, + .pm = pm_ptr(&icp10100_pm), .of_match_table = icp10100_of_match, }, .probe = icp10100_probe, diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c index 7ee7ff8047a4..549c0ab5c2be 100644 --- a/drivers/iio/temperature/mlx90632.c +++ b/drivers/iio/temperature/mlx90632.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -128,6 +129,7 @@ * calculations * @object_ambient_temperature: Ambient temperature at object (might differ of * the ambient temperature of sensor. + * @regulator: Regulator of the device */ struct mlx90632_data { struct i2c_client *client; @@ -136,6 +138,7 @@ struct mlx90632_data { u16 emissivity; u8 mtyp; u32 object_ambient_temperature; + struct regulator *regulator; }; static const struct regmap_range mlx90632_volatile_reg_range[] = { @@ -207,6 +210,15 @@ static s32 mlx90632_pwr_continuous(struct regmap *regmap) MLX90632_PWR_STATUS_CONTINUOUS); } +/** + * mlx90632_reset_delay() - Give the mlx90632 some time to reset properly + * If this is not done, the following I2C command(s) will not be accepted. + */ +static void mlx90632_reset_delay(void) +{ + usleep_range(150, 200); +} + /** * mlx90632_perform_measurement() - Trigger and retrieve current measurement cycle * @data: pointer to mlx90632_data object containing regmap information @@ -248,11 +260,7 @@ static int mlx90632_set_meas_type(struct regmap *regmap, u8 type) if (ret < 0) return ret; - /* - * Give the mlx90632 some time to reset properly before sending a new I2C command - * if this is not done, the following I2C command(s) will not be accepted. - */ - usleep_range(150, 200); + mlx90632_reset_delay(); ret = regmap_write_bits(regmap, MLX90632_REG_CONTROL, (MLX90632_CFG_MTYP_MASK | MLX90632_CFG_PWR_MASK), @@ -841,6 +849,32 @@ static int mlx90632_wakeup(struct mlx90632_data *data) return mlx90632_pwr_continuous(data->regmap); } +static void mlx90632_disable_regulator(void *_data) +{ + struct mlx90632_data *data = _data; + int ret; + + ret = regulator_disable(data->regulator); + if (ret < 0) + dev_err(regmap_get_device(data->regmap), + "Failed to disable power regulator: %d\n", ret); +} + +static int mlx90632_enable_regulator(struct mlx90632_data *data) +{ + int ret; + + ret = regulator_enable(data->regulator); + if (ret < 0) { + dev_err(regmap_get_device(data->regmap), "Failed to enable power regulator!\n"); + return ret; + } + + mlx90632_reset_delay(); + + return ret; +} + static int mlx90632_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -876,6 +910,23 @@ static int mlx90632_probe(struct i2c_client *client, indio_dev->channels = mlx90632_channels; indio_dev->num_channels = ARRAY_SIZE(mlx90632_channels); + mlx90632->regulator = devm_regulator_get(&client->dev, "vdd"); + if (IS_ERR(mlx90632->regulator)) + return dev_err_probe(&client->dev, PTR_ERR(mlx90632->regulator), + "failed to get vdd regulator"); + + ret = mlx90632_enable_regulator(mlx90632); + if (ret < 0) + return ret; + + ret = devm_add_action_or_reset(&client->dev, mlx90632_disable_regulator, + mlx90632); + if (ret < 0) { + dev_err(&client->dev, "Failed to setup regulator cleanup action %d\n", + ret); + return ret; + } + ret = mlx90632_wakeup(mlx90632); if (ret < 0) { dev_err(&client->dev, "Wakeup failed: %d\n", ret); diff --git a/drivers/iio/test/iio-test-rescale.c b/drivers/iio/test/iio-test-rescale.c index cc782ccff880..31ee55a6faed 100644 --- a/drivers/iio/test/iio-test-rescale.c +++ b/drivers/iio/test/iio-test-rescale.c @@ -29,7 +29,7 @@ struct rescale_tc_data { const char *expected_off; }; -const struct rescale_tc_data scale_cases[] = { +static const struct rescale_tc_data scale_cases[] = { /* * Typical use cases */ @@ -477,7 +477,7 @@ const struct rescale_tc_data scale_cases[] = { }, }; -const struct rescale_tc_data offset_cases[] = { +static const struct rescale_tc_data offset_cases[] = { /* * Typical use cases */ diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig index a8e970db179d..afd05bf3345e 100644 --- a/drivers/staging/iio/Kconfig +++ b/drivers/staging/iio/Kconfig @@ -8,7 +8,6 @@ menu "IIO staging drivers" source "drivers/staging/iio/accel/Kconfig" source "drivers/staging/iio/adc/Kconfig" source "drivers/staging/iio/addac/Kconfig" -source "drivers/staging/iio/cdc/Kconfig" source "drivers/staging/iio/frequency/Kconfig" source "drivers/staging/iio/impedance-analyzer/Kconfig" source "drivers/staging/iio/meter/Kconfig" diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile index b15904b99581..5ed56fe57e14 100644 --- a/drivers/staging/iio/Makefile +++ b/drivers/staging/iio/Makefile @@ -6,7 +6,6 @@ obj-y += accel/ obj-y += adc/ obj-y += addac/ -obj-y += cdc/ obj-y += frequency/ obj-y += impedance-analyzer/ obj-y += meter/ diff --git a/drivers/staging/iio/cdc/Kconfig b/drivers/staging/iio/cdc/Kconfig deleted file mode 100644 index a7386bbbcb79..000000000000 --- a/drivers/staging/iio/cdc/Kconfig +++ /dev/null @@ -1,17 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# CDC drivers -# -menu "Capacitance to digital converters" - -config AD7746 - tristate "Analog Devices AD7745, AD7746 AD7747 capacitive sensor driver" - depends on I2C - help - Say yes here to build support for Analog Devices capacitive sensors. - (AD7745, AD7746, AD7747) Provides direct access via sysfs. - - To compile this driver as a module, choose M here: the - module will be called ad7746. - -endmenu diff --git a/drivers/staging/iio/cdc/Makefile b/drivers/staging/iio/cdc/Makefile deleted file mode 100644 index afb7499a7090..000000000000 --- a/drivers/staging/iio/cdc/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for industrial I/O CDC drivers -# - -obj-$(CONFIG_AD7746) += ad7746.o diff --git a/drivers/staging/iio/frequency/ad9832.c b/drivers/staging/iio/frequency/ad9832.c index f43464db618a..6f9eebd6c7ee 100644 --- a/drivers/staging/iio/frequency/ad9832.c +++ b/drivers/staging/iio/frequency/ad9832.c @@ -112,10 +112,10 @@ struct ad9832_state { * transfer buffers to live in their own cache lines. */ union { - __be16 freq_data[4]____cacheline_aligned; + __be16 freq_data[4]; __be16 phase_data[2]; __be16 data; - }; + } __aligned(IIO_DMA_MINALIGN); }; static unsigned long ad9832_calc_freqreg(unsigned long mclk, unsigned long fout) diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c index 94b131ef8a22..2b4267a87e65 100644 --- a/drivers/staging/iio/frequency/ad9834.c +++ b/drivers/staging/iio/frequency/ad9834.c @@ -83,7 +83,7 @@ struct ad9834_state { * DMA (thus cache coherency maintenance) requires the * transfer buffers to live in their own cache lines. */ - __be16 data ____cacheline_aligned; + __be16 data __aligned(IIO_DMA_MINALIGN); __be16 freq_data[2]; }; diff --git a/drivers/staging/iio/meter/ade7854.h b/drivers/staging/iio/meter/ade7854.h index a51e6e3183d3..7a49f8f1016f 100644 --- a/drivers/staging/iio/meter/ade7854.h +++ b/drivers/staging/iio/meter/ade7854.h @@ -162,7 +162,7 @@ struct ade7854_state { int bits); int irq; struct mutex buf_lock; - u8 tx[ADE7854_MAX_TX] ____cacheline_aligned; + u8 tx[ADE7854_MAX_TX] __aligned(IIO_DMA_MINALIGN); u8 rx[ADE7854_MAX_RX]; }; diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c index c0b2716d0511..e4cf42438487 100644 --- a/drivers/staging/iio/resolver/ad2s1210.c +++ b/drivers/staging/iio/resolver/ad2s1210.c @@ -94,8 +94,8 @@ struct ad2s1210_state { bool hysteresis; u8 resolution; enum ad2s1210_mode mode; - u8 rx[2] ____cacheline_aligned; - u8 tx[2] ____cacheline_aligned; + u8 rx[2] __aligned(IIO_DMA_MINALIGN); + u8 tx[2]; }; static const int ad2s1210_mode_vals[4][2] = { diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c index 073943cbcc2b..0a78053cb798 100644 --- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c +++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c @@ -830,7 +830,8 @@ static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm, } channel->adc_channel = args.args[0]; - channel->iio = devm_of_iio_channel_get_by_name(adc_tm->dev, node, NULL); + channel->iio = devm_fwnode_iio_channel_get_by_name(adc_tm->dev, + of_fwnode_handle(node), NULL); if (IS_ERR(channel->iio)) { ret = PTR_ERR(channel->iio); if (ret != -EPROBE_DEFER) diff --git a/include/dt-bindings/iio/adc/at91-sama5d2_adc.h b/include/dt-bindings/iio/adc/at91-sama5d2_adc.h index 70f99dbdbb42..866d36530583 100644 --- a/include/dt-bindings/iio/adc/at91-sama5d2_adc.h +++ b/include/dt-bindings/iio/adc/at91-sama5d2_adc.h @@ -13,4 +13,7 @@ /* pressure channel index */ #define AT91_SAMA5D2_ADC_P_CHANNEL 26 +/* SAMA7G5 Temperature sensor channel index. */ +#define AT91_SAMA7G5_ADC_TEMP_CHANNEL 31 + #endif diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index 5fa5957586cf..6802596b017c 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -13,7 +13,7 @@ struct iio_dev; struct iio_chan_spec; struct device; -struct device_node; +struct fwnode_handle; /** * struct iio_channel - everything needed for a consumer to use a channel @@ -99,26 +99,20 @@ void iio_channel_release_all(struct iio_channel *chan); struct iio_channel *devm_iio_channel_get_all(struct device *dev); /** - * of_iio_channel_get_by_name() - get description of all that is needed to access channel. - * @np: Pointer to consumer device tree node + * fwnode_iio_channel_get_by_name() - get description of all that is needed to access channel. + * @fwnode: Pointer to consumer Firmware node * @consumer_channel: Unique name to identify the channel on the consumer * side. This typically describes the channels use within * the consumer. E.g. 'battery_voltage' */ -#ifdef CONFIG_OF -struct iio_channel *of_iio_channel_get_by_name(struct device_node *np, const char *name); -#else -static inline struct iio_channel * -of_iio_channel_get_by_name(struct device_node *np, const char *name) -{ - return NULL; -} -#endif +struct iio_channel *fwnode_iio_channel_get_by_name(struct fwnode_handle *fwnode, + const char *name); /** - * devm_of_iio_channel_get_by_name() - Resource managed version of of_iio_channel_get_by_name(). + * devm_fwnode_iio_channel_get_by_name() - Resource managed version of + * fwnode_iio_channel_get_by_name(). * @dev: Pointer to consumer device. - * @np: Pointer to consumer device tree node + * @fwnode: Pointer to consumer Firmware node * @consumer_channel: Unique name to identify the channel on the consumer * side. This typically describes the channels use within * the consumer. E.g. 'battery_voltage' @@ -129,9 +123,9 @@ of_iio_channel_get_by_name(struct device_node *np, const char *name) * The allocated iio channel is automatically released when the device is * unbound. */ -struct iio_channel *devm_of_iio_channel_get_by_name(struct device *dev, - struct device_node *np, - const char *consumer_channel); +struct iio_channel *devm_fwnode_iio_channel_get_by_name(struct device *dev, + struct fwnode_handle *fwnode, + const char *consumer_channel); struct iio_cb_buffer; /** diff --git a/include/linux/iio/iio-opaque.h b/include/linux/iio/iio-opaque.h index 6b3586b3f952..d1f8b30a7c8b 100644 --- a/include/linux/iio/iio-opaque.h +++ b/include/linux/iio/iio-opaque.h @@ -11,6 +11,7 @@ * checked by device drivers but should be considered * read-only as this is a core internal bit * @driver_module: used to make it harder to undercut users + * @mlock_key: lockdep class for iio_dev lock * @info_exist_lock: lock to prevent use during removal * @trig_readonly: mark the current trigger immutable * @event_interface: event chrdevs associated with interrupt lines @@ -42,6 +43,7 @@ struct iio_dev_opaque { int currentmode; int id; struct module *driver_module; + struct lock_class_key mlock_key; struct mutex info_exist_lock; bool trig_readonly; struct iio_event_interface *event_interface; diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 5dfbfc991c69..f0ec8a5e5a7a 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -17,7 +17,7 @@ * Currently assumes nano seconds. */ -struct of_phandle_args; +struct fwnode_reference_args; enum iio_shared_by { IIO_SEPARATE, @@ -429,6 +429,8 @@ struct iio_trigger; /* forward declaration */ * provide a custom of_xlate function that reads the * *args* and returns the appropriate index in registered * IIO channels array. + * @fwnode_xlate: fwnode based function pointer to obtain channel specifier index. + * Functionally the same as @of_xlate. * @hwfifo_set_watermark: function pointer to set the current hardware * fifo watermark level; see hwfifo_* entries in * Documentation/ABI/testing/sysfs-bus-iio for details on @@ -508,8 +510,8 @@ struct iio_info { int (*debugfs_reg_access)(struct iio_dev *indio_dev, unsigned reg, unsigned writeval, unsigned *readval); - int (*of_xlate)(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec); + int (*fwnode_xlate)(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec); int (*hwfifo_set_watermark)(struct iio_dev *indio_dev, unsigned val); int (*hwfifo_flush_to_buffer)(struct iio_dev *indio_dev, unsigned count); diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index a7aa91f3a8dc..82faa98c719a 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -17,6 +17,8 @@ enum iio_event_info { IIO_EV_INFO_HIGH_PASS_FILTER_3DB, IIO_EV_INFO_LOW_PASS_FILTER_3DB, IIO_EV_INFO_TIMEOUT, + IIO_EV_INFO_RESET_TIMEOUT, + IIO_EV_INFO_TAP2_MIN_DELAY, }; #define IIO_VAL_INT 1 @@ -63,6 +65,7 @@ enum iio_chan_info_enum { IIO_CHAN_INFO_OVERSAMPLING_RATIO, IIO_CHAN_INFO_THERMOCOUPLE_TYPE, IIO_CHAN_INFO_CALIBAMBIENT, + IIO_CHAN_INFO_ZEROPOINT, }; #endif /* _IIO_TYPES_H_ */ diff --git a/include/linux/string_helpers.h b/include/linux/string_helpers.h index 4d72258d42fd..9e22cd78f3b8 100644 --- a/include/linux/string_helpers.h +++ b/include/linux/string_helpers.h @@ -126,4 +126,9 @@ static inline const char *str_enabled_disabled(bool v) return v ? "enabled" : "disabled"; } +static inline const char *str_read_write(bool v) +{ + return v ? "read" : "write"; +} + #endif diff --git a/include/linux/units.h b/include/linux/units.h index 681fc652e3d7..2793a41e73a2 100644 --- a/include/linux/units.h +++ b/include/linux/units.h @@ -20,6 +20,9 @@ #define PICO 1000000000000ULL #define FEMTO 1000000000000000ULL +#define NANOHZ_PER_HZ 1000000000UL +#define MICROHZ_PER_HZ 1000000UL +#define MILLIHZ_PER_HZ 1000UL #define HZ_PER_KHZ 1000UL #define KHZ_PER_MHZ 1000UL #define HZ_PER_MHZ 1000000UL diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h index 472cead10d8d..913864221ac4 100644 --- a/include/uapi/linux/iio/types.h +++ b/include/uapi/linux/iio/types.h @@ -105,6 +105,7 @@ enum iio_event_type { IIO_EV_TYPE_MAG_ADAPTIVE, IIO_EV_TYPE_CHANGE, IIO_EV_TYPE_MAG_REFERENCED, + IIO_EV_TYPE_GESTURE, }; enum iio_event_direction { @@ -112,6 +113,8 @@ enum iio_event_direction { IIO_EV_DIR_RISING, IIO_EV_DIR_FALLING, IIO_EV_DIR_NONE, + IIO_EV_DIR_SINGLETAP, + IIO_EV_DIR_DOUBLETAP, }; #endif /* _UAPI_IIO_TYPES_H_ */ diff --git a/tools/iio/iio_event_monitor.c b/tools/iio/iio_event_monitor.c index 2f4581658859..b3b3ea399f67 100644 --- a/tools/iio/iio_event_monitor.c +++ b/tools/iio/iio_event_monitor.c @@ -69,12 +69,15 @@ static const char * const iio_ev_type_text[] = { [IIO_EV_TYPE_MAG_ADAPTIVE] = "mag_adaptive", [IIO_EV_TYPE_CHANGE] = "change", [IIO_EV_TYPE_MAG_REFERENCED] = "mag_referenced", + [IIO_EV_TYPE_GESTURE] = "gesture", }; static const char * const iio_ev_dir_text[] = { [IIO_EV_DIR_EITHER] = "either", [IIO_EV_DIR_RISING] = "rising", - [IIO_EV_DIR_FALLING] = "falling" + [IIO_EV_DIR_FALLING] = "falling", + [IIO_EV_DIR_SINGLETAP] = "singletap", + [IIO_EV_DIR_DOUBLETAP] = "doubletap", }; static const char * const iio_modifier_names[] = { @@ -227,6 +230,7 @@ static bool event_is_known(struct iio_event_data *event) case IIO_EV_TYPE_THRESH_ADAPTIVE: case IIO_EV_TYPE_MAG_ADAPTIVE: case IIO_EV_TYPE_CHANGE: + case IIO_EV_TYPE_GESTURE: break; default: return false; @@ -236,6 +240,8 @@ static bool event_is_known(struct iio_event_data *event) case IIO_EV_DIR_EITHER: case IIO_EV_DIR_RISING: case IIO_EV_DIR_FALLING: + case IIO_EV_DIR_SINGLETAP: + case IIO_EV_DIR_DOUBLETAP: case IIO_EV_DIR_NONE: break; default: